[GB] Neuron - Shipping 100% Complete

[walletburner]

Shipping is 100% complete! Neuron has also been added to QMK, so if you're having issues just pull the newest repo. Please check your shipping boxes for the Golden Ticket, which still hasn't been found, but will yield a complete refund when located. Extras will go on sale in the very near future, after some much needed rest. Plate files for the staggered and ortholinear plates can be found here: https://walletburner.co/pages/neuron-information. If you run into any issues at all, don't hesitate to PM me.

[Jahakob]

Thank you so much for your work!

I am eagerly awaiting mine

[walletburner]

Extras are now up on https://walletburner.co/collections/all. Thank you so much to those who participated in the GB. There are some additional extras as replacements for damaged items that may go up later, but for now, this is it. Happy hunting!

[mxgian99]

for anyone reading this, Walletburner is a man of his word, thanks for running this awesome promotion, i bought my Neuron on the last day and was one of the last domestic orders shipped, but found the golden ticket. 

[MMKB]

for anyone reading this, Walletburner is a man of his word, thanks for running this awesome promotion, i bought my Neuron on the last day and was one of the last domestic orders shipped, but found the golden ticket.

Do you have more pictures of your Neuron? I love how the 6.25u spacebar looks on 40% even though it's off centered.

[walletburner]

for anyone reading this, Walletburner is a man of his word, thanks for running this awesome promotion, i bought my Neuron on the last day and was one of the last domestic orders shipped, but found the golden ticket.

Glad you found it!!!! Full refund issued as promised. Have a wonderful day and enjoy your Neuron!

[walletburner]

Extras shipped this morning! That's all packages of all Neurons out! PM me if you didn't get a tracking email or have any issues.

[tex_live_utility]

This is a great keyboard, thanks for designing it and running this group buy.

However I have one complaint about my Neuron: I don't like the way the spacebars are split

You already shared the plate file, so I can easily get my own plate cut for a different layout. But if I had the outline of the PCB, I could make a compatible PCB that supports my desired layout. Obviously I could measure the board and do it myself, but it would be nice to use the same outline if possible. Better still, if you're willing to share the PCB file that would save me quite a bit of work.

Is that something you'd be willing to share, and if so would you be willing to condone a small 3rd-party group buy for them?

[walletburner]

However I have one complaint about my Neuron: I don't like the way the spacebars are split

it supports full spacebar too if you don't like split..

You already shared the plate file, so I can easily get my own plate cut for a different layout. But if I had the outline of the PCB, I could make a compatible PCB that supports my desired layout. Obviously I could measure the board and do it myself, but it would be nice to use the same outline if possible. Better still, if you're willing to share the PCB file that would save me quite a bit of work.

Is that something you'd be willing to share, and if so would you be willing to condone a small 3rd-party group buy for them?

I'm not interested in sharing the PCB files, but The_Royal has already open-sourced the Schwann, an aftermarket ortho PCB with RGB underglow for Neuron, so I'm sure you can find everything you need to make a Neuron compatible PCB here: https://github.com/TheRoyalSweatshirt/The_Royal_Projects/tree/schwann/PCBs/Schwann_PCB . As long as the port is between Esc and Q and it's smaller than the plate outline it should work.

[tex_live_utility]

However I have one complaint about my Neuron: I don't like the way the spacebars are split

it supports full spacebar too if you don't like split..

You already shared the plate file, so I can easily get my own plate cut for a different layout. But if I had the outline of the PCB, I could make a compatible PCB that supports my desired layout. Obviously I could measure the board and do it myself, but it would be nice to use the same outline if possible. Better still, if you're willing to share the PCB file that would save me quite a bit of work.

Is that something you'd be willing to share, and if so would you be willing to condone a small 3rd-party group buy for them?

I'm not interested in sharing the PCB files, but The_Royal has already open-sourced the Schwann, an aftermarket ortho PCB with RGB underglow for Neuron, so I'm sure you can find everything you need to make a Neuron compatible PCB here: https://github.com/TheRoyalSweatshirt/The_Royal_Projects/tree/schwann/PCBs/Schwann_PCB . As long as the port is between Esc and Q and it's smaller than the plate outline it should work.

That helps, thank you. My issue with the split is not that it exists, it's just in a bad place for me. I'll fire Up Kicad and see what I can do, or maybe a JD40 works.

[CYFX]

Finally built my Neuron and this thing is great. This is the 3rd 40% Ive ever owned but Ive never really been patient enough to learn the new layout. I really want to try with this one though.

That being said, does anyone have either an image of the default Neuron config layout, or maybe have a config file that I could take a look at and test and then modify to my liking? Before the Neuron GB channel was taken down from the 40% discord a lot of people were sharing their configs and images of their layouts, but I didnt get a chance to pull any of them down.

Any help with this is greatly appreciated.

[That_One_Brodie]

Finally built my Neuron and this thing is great. This is the 3rd 40% Ive ever owned but Ive never really been patient enough to learn the new layout. I really want to try with this one though.

That being said, does anyone have either an image of the default Neuron config layout, or maybe have a config file that I could take a look at and test and then modify to my liking? Before the Neuron GB channel was taken down from the 40% discord a lot of people were sharing their configs and images of their layouts, but I didnt get a chance to pull any of them down.

Any help with this is greatly appreciated.

DM'd you. I have the Default hex file. I can send it to you.

[tex_live_utility]

Finally built my Neuron and this thing is great. This is the 3rd 40% Ive ever owned but Ive never really been patient enough to learn the new layout. I really want to try with this one though.

That being said, does anyone have either an image of the default Neuron config layout, or maybe have a config file that I could take a look at and test and then modify to my liking? Before the Neuron GB channel was taken down from the 40% discord a lot of people were sharing their configs and images of their layouts, but I didnt get a chance to pull any of them down.

Any help with this is greatly appreciated.

I just put the Via hex on mine. Made it easier to iterate on a layout that I liked.

[CYFX]

Finally built my Neuron and this thing is great. This is the 3rd 40% Ive ever owned but Ive never really been patient enough to learn the new layout. I really want to try with this one though.

That being said, does anyone have either an image of the default Neuron config layout, or maybe have a config file that I could take a look at and test and then modify to my liking? Before the Neuron GB channel was taken down from the 40% discord a lot of people were sharing their configs and images of their layouts, but I didnt get a chance to pull any of them down.

Any help with this is greatly appreciated.

I just put the Via hex on mine. Made it easier to iterate on a layout that I liked.

Thanks for pointing that out, I just noticed that the Neuron was updated with VIA support. I just flashed the via hex today, took me forever to figure out why VIA did see my Neuron. I just had to install the latest version of VIA and boom there it was.

Ill mess around with the layout and see what suites me best. Was just hoping to find a good base to start with.

[hayt]

Happy with how mine turned out

[walletburner]

Happy with how mine turned out

Show Image

Gorgeous!

I also made the Walletburner Industries Discord today, to form as a central place to discuss my current and future projects and ask for help or find documentation for completed GBs. Come hang out: https://discord.gg/qBs5bRU.