Viktus Sinne
by
Viktus Design
(https://i.imgur.com/wdFOsQu.jpg)
Specifications:
• O-Ring/Burger Top Mount (3 mounts top, 3 mounts bottom)
• HHKB, WKL or WK Layout
• Polycarbonate case
• 7 degree board angle
• Type-C PCB support only (more info below)
• ~1.7 Kg w/brass plate
• Designed in collaboration with OneCreativeMind.
Where to buy:
• The GB will go live on Viktus.Design (http://www.Viktus.Design)
• I am accepting US and international orders.
Dates:
• November 1st, 2021 @ Noon CDT to November 30th, 2021 @ Midnight CDT
• Q2/Q3 2022 delivery (depending on order volume this might change)
Mounting:
(https://i.imgur.com/ABscQQ8.jpg)
• Above is showing the O-rings on top and bottom of the plate as designed but you can build the board with multiple different mounting methods if you wish.
• If you want a squishier mount and are willing to redrill the plate mount holes to ~4mm, you can use drone controller soft mounts (silicone) and M3 set screws for alignment. (note this will drop the plate down a bit lower than normal)
Viktus Sinne Info:
• Color options:
• Clear PC with sandblasted brass plate, weight, logo
• Smoked PC with sandblasted brass plate, weight, logo
• Atomic Purple PC with sandblasted brass plate, weight, logo
• Teal PC with sandblasted brass plate, weight, logo (not prototyped yet, reference image on the product page)
• Layout options:
• HHKB
• WKL
• WK, 7U bottom row only (with included/sold plates)
• Pricing:
• Board:
- Dyed: $365
- Clear: $360
• PCB not included.
• Extra Tops: $110 each (all layouts and colors. Colors may vary from your full board due to batch variance and the dye process)
• Plates:
• Brass: HHKB, WKL, WK, 10U WKL
• Smoked PC: HHKB, HHKB half, WKL, WKL half, WK, WK half
• Forged carbon fiber: HHKB, HHKB half, WKL, WKL half, WK, WK half
• Quantity:
• MOQ: 80
• MAX: Human limit, depends on how interest goes but probably somewhere around 200ish.
• Name:
• The name Sinne means "mind" in swedish because of OneCreativeMind
PCB Support:
• All PCBs must have USB Type-C
• Tested to fit:
• ANC60 v1 and v2
• WT60-D
• H60
• DZ60
• Plain60
Layout Support:
(https://i.imgur.com/dJiMqDh.jpg)
Prototype Pictures:
(https://i.imgur.com/SNyOozO.jpg)
(https://i.imgur.com/4Qd9UVi.jpg)
(https://i.imgur.com/fDLz2Pk.jpg)
(https://i.imgur.com/9YYxVf6.jpg)
Full album:
Viktus Sinne prototype album (https://imgur.com/a/ChLsalc)
A few more amazing pictures:
NinjaPirate picture album (https://imgur.com/a/3RA8O8k)
Build Streams:
• TopClack did a build stream here. (https://www.youtube.com/watch?v=Qp4R3k1HV2Q)
• TaehaTypes did a build stream here. (https://www.youtube.com/watch?v=URzHffjhCMI)
Special Thanks:
• OneCreativeMind for the original concept and name along with all of the feedback and support.
• Nox for helping fund the prototypes
• Quakemz for helping with the first build stream and being an all around awesome person to talk with.
• NinjaPirate for the unbelievably amazing pictures of my prototype.
• TaehaTypes for the second build stream of my prototype.
FAQ:
• Is a PCB included? I will not be including a PCB with the board. It has been confirmed to work with the AN-C (v1 and v2), Plain60, h60, DZ60, and WT60-D. Basically if it has a type-c connector it should work but I can't test every single option.
• Can you release the files so I can 3D print it? No.
• Will there be an aluminum version? At the moment there isn't plans for it but maybe later down the road.
Updates:
To follow the project you can keep up with this thread, my website www.Viktus.Design or via the Viktus Design discord server where I will be most active.
Discord invite: https://discord.com/invite/4w6aUKb