Author Topic: [GB] LZ CLS s x h (Classic 60) : [Finish] (Read 107363 times)

LifeZ · « **Reply #200 on:** Tue, 06 February 2018, 20:27:31 »

Quote from: DJSwayde on Tue, 06 February 2018, 08:57:59

Quote from: LifeZ on Tue, 06 February 2018, 08:56:19
Quote from: DJSwayde on Tue, 06 February 2018, 08:17:35
Is it possible to test with an Alps64 PCB? Thanks.

yes, no problem.
Many 60PCB USB locations are slightly different, but no problem.
Thank you for the confirmation!

ALPS 60%(Alps64 pcb Test ok)
[ Specified attachment is not available ]

LifeZ · « **Reply #201 on:** Fri, 09 February 2018, 05:53:49 »

Quote from: LifeZ on Thu, 25 January 2018, 18:49:27

Quote from: kekstee on Thu, 25 January 2018, 03:06:22
Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)
I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0

60% There are many kinds of pcb. And the position of the connector is slightly different.

If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)

update.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R)(W), Zeal60, DO60 and iGK61(iGK64 is custom layout plate)
Sample PCB : iGK61 (backlight RGB LEDs)

profanum429 · « **Reply #202 on:** Fri, 09 February 2018, 08:27:44 »

I sent a follow up email earlier about the plate list in my custom layout picture, just wanted to make sure I don't miss the cut off for order check!

kekstee · « **Reply #203 on:** Fri, 09 February 2018, 09:01:51 »

Thank you for the confirmation on those PCBs. That's a nice service.

This is going to be a long wait...

ihalatch · « **Reply #204 on:** Fri, 09 February 2018, 18:47:40 »

Quote from: LifeZ on Fri, 09 February 2018, 05:53:49

Quote from: LifeZ on Thu, 25 January 2018, 18:49:27
Quote from: kekstee on Thu, 25 January 2018, 03:06:22
Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)
I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0

60% There are many kinds of pcb. And the position of the connector is slightly different.

If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)
update.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R)(W), Zeal60, DO60 and iGK61(iGK64 is custom layout plate)
Sample PCB : iGK61 (backlight RGB LEDs)
(Attachment Link)
(Attachment Link)
(Attachment Link)

Damn you LZ. I'm broke and can't afford it right now. This is one beautiful keyboard.

poolside · « **Reply #205 on:** Sat, 10 February 2018, 08:22:17 »

Hi LZ, I have just sent you an email regarding a last minute change to my order

amnesia0287 · « **Reply #206 on:** Sat, 10 February 2018, 20:52:16 »

Is the ordercheck sheet going to update? I sent my details in on the 9th, but I'm not sure how to tell if everything was okay

midnight2903 · « **Reply #207 on:** Sat, 10 February 2018, 21:33:39 »

How the **** did I miss this?!?!

LifeZ · « **Reply #208 on:** Mon, 12 February 2018, 22:51:29 »

Calculations are incorrect due to formula errors in some orders. You have sent an updated invoice.
The purchase order calculation is incorrect and has been fixed.

donut_sauce · « **Reply #209 on:** Mon, 12 February 2018, 23:13:30 »

donut_sauce · « **Reply #210 on:** Mon, 12 February 2018, 23:14:56 »

Hey LZ. So I already sent a payment, can I just pay the difference?

Edit: never mind, just saw that you refunded.

amnesia0287 · « **Reply #211 on:** Wed, 14 February 2018, 12:41:42 »

Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.

Sent from my iPhone using Tapatalk

Depeche · « **Reply #212 on:** Wed, 14 February 2018, 12:57:29 »

Quote from: Amnesia on Wed, 14 February 2018, 12:41:42

Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.

Sent from my iPhone using Tapatalk

Got any tips for that?

sroop · « **Reply #213 on:** Wed, 14 February 2018, 13:17:19 »

Quote from: Depeche on Wed, 14 February 2018, 12:57:29

Quote from: Amnesia on Wed, 14 February 2018, 12:41:42
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.

Sent from my iPhone using Tapatalk

Got any tips for that?

1)Get into multiple GBs at the same time
2)eventually get overwhelmed trying to keep track of one particular keyboard
3)become homeless and begin a life of crime to supply your addiction
4) ? ? ?
5)Profit

Depeche · « **Reply #214 on:** Wed, 14 February 2018, 13:27:15 »

Quote from: sroop on Wed, 14 February 2018, 13:17:19

Quote from: Depeche on Wed, 14 February 2018, 12:57:29
Quote from: Amnesia on Wed, 14 February 2018, 12:41:42
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.

Sent from my iPhone using Tapatalk

Got any tips for that?

1)Get into multiple GBs at the same time
2)eventually get overwhelmed trying to keep track of one particular keyboard
3)become homeless and begin a life of crime to supply your addiction
4) ? ? ?
5)Profit

Genius. Now I just need to figure out where to store the keyboards at the homeless stage.

odd · « **Reply #215 on:** Wed, 14 February 2018, 14:11:37 »

Can you add another pcb and polycarb plate to my order. I also dont remember if i added a bag if not can you add that as well? Thank you

CommonCurt · « **Reply #216 on:** Wed, 14 February 2018, 23:23:57 »

Invoice paid

aaron6301 · « **Reply #217 on:** Thu, 15 February 2018, 10:32:39 »

LZ,

I sent a follow up email regarding shipping address confirmation. Can you please have a look and verify?

Once verified, I can make my payment.

Thanks

airs · « **Reply #218 on:** Thu, 15 February 2018, 11:53:51 »

I'm confused - for the HHKB version, how will the plate (I opted for CF) and PCB fit? Will I need to do some dremeling?

Edit: I guess it'll just sit under the blockers and not be an issue?

xondat · « **Reply #219 on:** Thu, 15 February 2018, 11:57:37 »

Quote from: airs on Thu, 15 February 2018, 11:53:51

I'm confused - for the HHKB version, how will the plate (I opted for CF) and PCB fit? Will I need to do some dremeling?

Edit: I guess it'll just sit under the blockers and not be an issue?

Edit is correct.

aaron6301 · « **Reply #220 on:** Wed, 21 February 2018, 12:42:16 »

Paid, thanks LZ.

theillumedpanda · « **Reply #221 on:** Sat, 24 February 2018, 14:30:15 »

Paid the invoice 2 days ago.

pixelpusher · « **Reply #222 on:** Sat, 24 February 2018, 14:32:31 »

Let us know if there are any unpaid. I might pick one up

airs · « **Reply #223 on:** Mon, 26 February 2018, 13:35:20 »

Paid! Thanks LZ.

theillumedpanda · « **Reply #224 on:** Mon, 26 February 2018, 15:45:24 »

Quote from: reececonrad on Sat, 24 February 2018, 14:32:31

Let us know if there are any unpaid. I might pick one up

You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot

amnesia0287 · « **Reply #225 on:** Mon, 26 February 2018, 18:21:00 »

Quote from: theillumedpanda on Mon, 26 February 2018, 15:45:24

Quote from: reececonrad on Sat, 24 February 2018, 14:32:31
Let us know if there are any unpaid. I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot

theillumedpanda · « **Reply #226 on:** Mon, 26 February 2018, 18:23:39 »

Quote from: Amnesia on Mon, 26 February 2018, 18:21:00

Quote from: theillumedpanda on Mon, 26 February 2018, 15:45:24
Quote from: reececonrad on Sat, 24 February 2018, 14:32:31
Let us know if there are any unpaid. I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot

Wasn‘t purely because of that, but I somewhat had to decide between the two. Looking forward to this either way!

pixelpusher · « **Reply #227 on:** Mon, 26 February 2018, 19:50:23 »

Quote from: theillumedpanda on Mon, 26 February 2018, 15:45:24

Quote from: reececonrad on Sat, 24 February 2018, 14:32:31
Let us know if there are any unpaid. I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot

Maaaaaybe....

xondat · « **Reply #228 on:** Tue, 27 February 2018, 03:56:31 »

Quote from: theillumedpanda on Mon, 26 February 2018, 15:45:24

Quote from: reececonrad on Sat, 24 February 2018, 14:32:31
Let us know if there are any unpaid. I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot

Lucky Reece

cheunjm · « **Reply #229 on:** Tue, 20 March 2018, 03:16:04 »

If anyone wants to let go of their hhkb version, please let me know! Happy to take your spot.

Sent from my SM-G955N using Tapatalk

nzhoward · « **Reply #230 on:** Fri, 23 March 2018, 14:22:31 »

I have a spot for standard 60% version, black I believe. Pm me on reddit or discord if interested (reddit: /u/nzhoward, discord: nzhoward) Thanks!

kconfire · « **Reply #231 on:** Fri, 23 March 2018, 18:18:52 »

I have Red HHKB spot I'd be willing to switch out, too if anyone's interested!

PM kconfire on Reddit/GH.

mago · « **Reply #232 on:** Tue, 17 April 2018, 03:55:52 »

If anyone wants to sell a Silver HHKB version with STS plate slot, please message me whenever

Helldrop · « **Reply #233 on:** Tue, 17 April 2018, 10:22:20 »

I'm looking for CLSs, Standard 60%, except for Silver one!
If anyone wants to cancel the order, please PM me whenever.

Edit: I succeeded to get the board!

LifeZ · « **Reply #234 on:** Mon, 23 April 2018, 00:45:02 »

UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%

Vadurr · « **Reply #235 on:** Mon, 23 April 2018, 01:10:04 »

Quote from: LifeZ on Mon, 23 April 2018, 00:45:02

UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)

ooohyahhh

CommonCurt · « **Reply #236 on:** Mon, 23 April 2018, 01:37:49 »

Quote from: LifeZ on Mon, 23 April 2018, 00:45:02

UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)

Thanks for the update LZ

LifeZ · « **Reply #237 on:** Tue, 24 April 2018, 19:01:07 »

MX Switch plate
carbon, pc, alu

profanum429 · « **Reply #238 on:** Tue, 24 April 2018, 19:02:57 »

Hnnnnng, looking forward to this!

CommonCurt · « **Reply #239 on:** Tue, 24 April 2018, 20:46:01 »

Quote from: LifeZ on Tue, 24 April 2018, 19:01:07

MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.

amnesia0287 · « **Reply #240 on:** Tue, 24 April 2018, 21:22:38 »

Quote from: CommonCurt on Tue, 24 April 2018, 20:46:01

Quote from: LifeZ on Tue, 24 April 2018, 19:01:07
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

CommonCurt · « **Reply #241 on:** Tue, 24 April 2018, 22:47:33 »

Quote from: amnesia0287 on Tue, 24 April 2018, 21:22:38

Quote from: CommonCurt on Tue, 24 April 2018, 20:46:01
Quote from: LifeZ on Tue, 24 April 2018, 19:01:07
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

No, the Order Check link in the OP is definitely not working for me (even when copying to a new tab).

The one on page 4 does work though

Spaghetti · « **Reply #242 on:** Thu, 26 April 2018, 15:02:08 »

Quote from: CommonCurt on Tue, 24 April 2018, 22:47:33

Quote from: amnesia0287 on Tue, 24 April 2018, 21:22:38
Quote from: CommonCurt on Tue, 24 April 2018, 20:46:01
Quote from: LifeZ on Tue, 24 April 2018, 19:01:07
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

No, the Order Check link in the OP is definitely not working for me (even when copying to a new tab).

The one on page 4 does work though