Author Topic: I made a brass artisan - thoughts?  (Read 2728 times)

0 Members and 1 Guest are viewing this topic.

Offline nitwimp

  • Thread Starter
  • Posts: 16
  • Location: America
I made a brass artisan - thoughts?
« on: Mon, 13 June 2022, 00:36:08 »
Hello everybody, this post is going to be about the process i worked through to mill out some metal keycaps. Writing and organized documentation are not my strong suit - sorry if some of this is overly summarized

I am a machinist with a small shop, attended school for maching/drafting and then worked as a manual machinist afterwards. Self taught mostly about CNC/CAD/CAM - at first it was overwhelming but i've learned alot since i started :) - with that brief background about myself out of the way, lets get into it

First I downloaded pre modeled caps (I used hineybush's work, would recommend 10/10 design)

I had to modify them a little bit to make them work for me and my approach to milling them
Started with this

Turned it into this

I made the stem like that for tool clearance reasons

Heres a picture of op1 on the mill - cutting the bottoms of the caps/stems


I had to do the bottom side first ( honestly thats how i've done 90% of parts on my mill ) because i thread the center of the stem with m3 thread to aid in holding down the cap for the second operation

Here is the fixture i came up with, it took a couple attempts but i now have a design that i can easily scale up or down if i want to make more fixtures





Now that operation 1 is complete and we have made our fixture, we can attach our half completed workpiece to it and begin operation 2


heres a small snippet of tool pathing from op2


Now that we have finished milling its time to pull the caps out and give them a quick rinse - heres where we are


Heres what the underside looks like fresh off the mill


Fit check

The caps feel good and not too heavy for stock mx brown switches. Alum would be more ideal for switches with a similar spring weight to mx browns - but for an escape key, its great
So far so good, now im starting to get excited about my progress

Now its time to laser engrave the caps and then lightly sandblast them for powdercoat prep (I used cerakote)

Now its time to finish the caps - I bought a cheap airbrush off of amazon, some cerakote online and a cheap oven from walmart to powder coat them at home


I attached long threaded rod to the tapped stem i used for fixturing (so i have something to hold onto while painting it)


If you can visualize with me - After i spray the lollypop cap i place it into a fixture so the wet cerakote is safe for placing/cooking in the oven


After many attempts I finally got results I was happy with





Heres a example of how the cap sits compared to plastic cherry caps


And thats really about it, please feel free to ask any questions you might have - I hope my post is easy to follow, thanks!!!

imgur dump: https://imgur.com/a/APvk55s










 





« Last Edit: Mon, 13 June 2022, 13:30:51 by nitwimp »

Offline phinix

  • Posts: 1949
  • Location: Haggis Land
  • On a diet.. again.. don't ask...
Re: I made a brass artisan - thoughts?
« Reply #1 on: Mon, 13 June 2022, 04:56:40 »
Niiice:)
9100 | 3070 | 2x 1TB SSD | Z390 Aorus Pro ITX | 16GB RAM | SFX 600W | Sentry 2.0 | Ruark Audio MR1 Mark II | LG OLED 48CX
HHKB Pro Hybrid | Realforce 87U | Kbdfans Tiger 80 TKL | CM QuickFire Rapid MX Blacks Frosty Flake | Logitech Pro Superlight
SA: 7bit's R5 Symbiosis, Filco, SA Carbon Bone Cherry: GMK Laser, OG double shot caps, CRP APL MT3: Godspeed, 9009 Topre: Kbdfans Hi Pro C64

::: Phinix Cube ::: Phinix Nano Tower ::: Phinix Aurora ::: Phinix Chimera ::: Phinix Retro :::

Online suicidal_orange

  • * Global Moderator
  • Posts: 4655
  • Location: England
Re: I made a brass artisan - thoughts?
« Reply #2 on: Mon, 13 June 2022, 05:14:31 »
Impressive!  The threaded stem for clamping is a great idea.  Is there a polishing step or is there a "shiny bronze" Cerakote?

Out of interest why brass not aluminium as it's lighter and cheaper?
120/100g linear Zealio R1  
GMK Hyperfuse
'Split everything' perfection  
MX Clear
SA Hack'd by Geeks     
EasyAVR mod

Offline nitwimp

  • Thread Starter
  • Posts: 16
  • Location: America
Re: I made a brass artisan - thoughts?
« Reply #3 on: Mon, 13 June 2022, 11:23:59 »
Impressive!  The threaded stem for clamping is a great idea.  Is there a polishing step or is there a "shiny bronze" Cerakote?

Out of interest why brass not aluminium as it's lighter and cheaper?

The ones with exposed metal are polished - I dont think there is a Cerakote thaaattt shiny.


Yeah aluminum is cheaper and lighter but i had some brass left over from some keeb case weights

Offline Tha_Pig

  • Posts: 3
    • Futurepig
Re: I made a brass artisan - thoughts?
« Reply #4 on: Sat, 30 July 2022, 16:34:54 »
That's some impressive work there!   :thumb:
I have two questions, could this be done with aluminum? (I see it's already been asked)
And, could the letters and numbers be engraved on the surface of the key?


« Last Edit: Sat, 30 July 2022, 16:42:26 by Tha_Pig »

Offline NamesReed

  • Posts: 28
  • Location: Montana
  • 40 enjoyer, Cheapskate.
Re: I made a brass artisan - thoughts?
« Reply #5 on: Fri, 05 August 2022, 14:05:59 »
Maybe I missed it in the post, but any idea what they weigh?

Looks great!
IDK man, be positive, kind and caring.

Offline daviddgm

  • Posts: 25
Re: I made a brass artisan - thoughts?
« Reply #6 on: Tue, 09 August 2022, 17:32:03 »
Wow... great!