Author Topic: KIRA60 by thesiscamper (100% shipped)  (Read 50191 times)

0 Members and 1 Guest are viewing this topic.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #150 on: Fri, 02 February 2018, 23:31:37 »
For the following people, would appreciate a reply soon :)

1. IneffableTao
2. Afrokobe
3. W4neWang
4. joedubstep
5. trente
6. Lee Jung Woo
7. Hongguchaego


Sent from my iPhone using Tapatalk
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline afrokobe

  • Posts: 296
Re: KIRA60 by thesiscamper
« Reply #151 on: Sat, 03 February 2018, 09:31:48 »
For the following people, would appreciate a reply soon :)

1. IneffableTao
2. Afrokobe
3. W4neWang
4. joedubstep
5. trente
6. Lee Jung Woo
7. Hongguchaego


Sent from my iPhone using Tapatalk

Replied!

Offline janglad

  • * Vendor
  • Posts: 632
  • Location: Belgium
  • qoda.studio
    • Clavier.xyz
Re: KIRA60 by thesiscamper
« Reply #152 on: Sat, 03 February 2018, 15:41:40 »
OK so I got an offer for both a red one and silver one. Assuming all anodisation is done already (is it @Beamingrobot?), is there anyone here who has an order in for a black one but would like to swap spots for a silver/red one?  :))

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: KIRA60 by thesiscamper
« Reply #153 on: Sat, 03 February 2018, 17:48:07 »
For the following people, would appreciate a reply soon :)

1. IneffableTao
2. Afrokobe
3. W4neWang
4. joedubstep
5. trente
6. Lee Jung Woo
7. Hongguchaego


Sent from my iPhone using Tapatalk
Ofc the Dallas guys slacking...

Sent from my Pixel 2 XL using Tapatalk


Offline regionfree

  • Posts: 319
  • Location: Sa kagubatan
Re: KIRA60 by thesiscamper
« Reply #154 on: Sun, 04 February 2018, 06:12:44 »
Typing sound test with the black Kira60. Specs:

- brass plate from kbdfans (glossy finish)
- 78g zealios in black cherry housings (cherrios?)
- gmk carbon caps
- gh60 pcb


Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #155 on: Sun, 11 February 2018, 08:39:17 »
Stuff's all packed. Instructions have been sent regarding shipping payment.

http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #156 on: Sun, 11 February 2018, 08:51:02 »
By the way, if any of you have trouble paying, just give it a bit of time and try again. Shopify might be having some problems or something.


Sent from my iPhone using Tapatalk
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: KIRA60 by thesiscamper
« Reply #157 on: Sun, 11 February 2018, 17:26:25 »
By the way, if any of you have trouble paying, just give it a bit of time and try again. Shopify might be having some problems or something.


Sent from my iPhone using Tapatalk
I had trouble getting it to work with my debit card.  Used a credit card and it worked  fine.  Thanks!

Sent from my Pixel 2 XL using Tapatalk


Offline afrokobe

  • Posts: 296
Re: KIRA60 by thesiscamper
« Reply #158 on: Mon, 12 February 2018, 09:23:49 »
just paid!

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #159 on: Mon, 12 February 2018, 09:48:36 »
Thanks for paying so quickly guys, we've just sent off a few packages so you should be receiving a tracking number in the next day or two for those who paid earlier. Shipping is via DHL Express so it should be really quick.

We still have a few shipping invoices unpaid, again we won't be able to ship starting on Thurs for a week as it's also CNY hols here in SEA :)


Also, if anyone is a friend of Lee Jung Woo, please reach out to us. Dude has not replied to any of our messages.
« Last Edit: Mon, 12 February 2018, 09:51:08 by beamingrobot »
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline midnight2903

  • Posts: 344
  • Location: Singapore
Re: KIRA60 by thesiscamper
« Reply #160 on: Mon, 12 February 2018, 11:09:17 »
I sure wouldn't mind taking any extras :))

Offline sroop

  • Posts: 91
Re: KIRA60 by thesiscamper
« Reply #161 on: Mon, 12 February 2018, 11:11:40 »
Thanks for paying so quickly guys, we've just sent off a few packages so you should be receiving a tracking number in the next day or two for those who paid earlier. Shipping is via DHL Express so it should be really quick.

We still have a few shipping invoices unpaid, again we won't be able to ship starting on Thurs for a week as it's also CNY hols here in SEA :)


Also, if anyone is a friend of Lee Jung Woo, please reach out to us. Dude has not replied to any of our messages.
Do we get our tracking number directly from you or through a third party? I have received a couple of shipping notices this weekend but I'm not sure which one is which.


Sent from my iPhone using Tapatalk

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: KIRA60 by thesiscamper
« Reply #162 on: Mon, 12 February 2018, 15:42:17 »
Will there be a R2?

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #163 on: Mon, 12 February 2018, 16:12:36 »
Will there be a R2?

From the op:

Quote
There are no plans for round 2, and no extras for sale after the GB has ended.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #164 on: Mon, 12 February 2018, 20:46:46 »
Thanks for paying so quickly guys, we've just sent off a few packages so you should be receiving a tracking number in the next day or two for those who paid earlier. Shipping is via DHL Express so it should be really quick.

We still have a few shipping invoices unpaid, again we won't be able to ship starting on Thurs for a week as it's also CNY hols here in SEA :)


Also, if anyone is a friend of Lee Jung Woo, please reach out to us. Dude has not replied to any of our messages.
Do we get our tracking number directly from you or through a third party? I have received a couple of shipping notices this weekend but I'm not sure which one is which.


Sent from my iPhone using Tapatalk

It should be sent via PayPal automatically.
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: KIRA60 by thesiscamper
« Reply #165 on: Thu, 15 February 2018, 10:32:07 »
Mine just showed up.  Will take some proper photos later but the kit looks really nice with no issues.  Thanks robot

Sent from my Pixel 2 XL using Tapatalk


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: KIRA60 by thesiscamper
« Reply #166 on: Thu, 15 February 2018, 17:18:09 »
Mine just showed up.  Will take some proper photos later but the kit looks really nice with no issues.  Thanks robot
Show Image
Show Image


Sent from my Pixel 2 XL using Tapatalk

nice!
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #167 on: Thu, 15 February 2018, 20:35:54 »
Purple is so gud. It's so dark it looks black in some light, with a flash it's lighter than my klippe, but in most light its clearly darker. It's excellent :D











It's also a fatboi. Weighs more than E6 (without brass midcase) or Klippe by a good bit.

Finish is perfect. I am quite happy with it :D


Offline ns90

  • Posts: 134
Re: KIRA60 by thesiscamper
« Reply #168 on: Thu, 15 February 2018, 20:42:16 »
Purple is so gud. It's so dark it looks black in some light, with a flash it's lighter than my klippe, but in most light its clearly darker. It's excellent :D

Show Image


Show Image


Show Image


Show Image


Show Image


It's also a fatboi. Weighs more than E6 (without brass midcase) or Klippe by a good bit.

Finish is perfect. I am quite happy with it :D

Would you say it's a...deep purple?

In all seriousness, I can't wait to get mine tomorrow.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #169 on: Fri, 16 February 2018, 02:43:47 »
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #170 on: Fri, 16 February 2018, 06:17:32 »
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).
M3, 6mm
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: KIRA60 by thesiscamper
« Reply #171 on: Sat, 17 February 2018, 07:51:26 »
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).

The screws for the weight should be M3*5 (IIRC), and M2 for the PCB.


"haters are confused admirers"

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: KIRA60 by thesiscamper
« Reply #172 on: Sat, 17 February 2018, 17:27:04 »
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).

The screws for the weight should be M3*5 (IIRC), and M2 for the PCB.

(this is the standard for most cases, in case anyone was looking for screws for a different case)
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #173 on: Sat, 17 February 2018, 18:28:59 »
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).

The screws for the weight should be M3*5 (IIRC), and M2 for the PCB.

(this is the standard for most cases, in case anyone was looking for screws for a different case)

Sorry, I should be more clear, the screws I'm referring to are these:



And my question is not what type of threading they have, I have lots of screws that work for tray cases, what I was wondering was how long they are (they are longer than other screws I have) and what type of screws they actually are. I like that they are like hex thumb screws, it just looks good to me. So I want to know what to search for on google to purchase the same thing.

Anyway, I don't really care about the missing screw, I just wanna order a box/bag of screws like these. So if anyone could tell me what they are called I would appreciate it :D.

Offline dohmain

  • Posts: 51
Re: KIRA60 by thesiscamper
« Reply #174 on: Sat, 17 February 2018, 22:08:19 »
Anyway, I don't really care about the missing screw, I just wanna order a box/bag of screws like these. So if anyone could tell me what they are called I would appreciate it :D.

m2x6 hex cap screw

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper
« Reply #175 on: Sat, 17 February 2018, 22:22:32 »
Dohmain is correct, it's M2*6mm. My bad had a brain fart.


Sent from my iPhone using Tapatalk
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #176 on: Sun, 18 February 2018, 12:16:14 »
Anyway, I don't really care about the missing screw, I just wanna order a box/bag of screws like these. So if anyone could tell me what they are called I would appreciate it :D.

m2x6 hex cap screw

Perfect. Danke. I tried a bunch of searches and nothing looked right. I knew I just needed the right name.

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: KIRA60 by thesiscamper
« Reply #177 on: Mon, 19 February 2018, 19:54:53 »
Just finished building this one. Nothing special, just did it to take some photos.

189160-0


"haters are confused admirers"

Offline mudcakehoney

  • Posts: 352
  • Location: AU
Re: KIRA60 by thesiscamper
« Reply #178 on: Mon, 19 February 2018, 20:03:15 »
:O that green!! Just wow

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #179 on: Mon, 19 February 2018, 21:12:09 »
Just finished building this one. Nothing special, just did it to take some photos.

(Attachment Link)

zomg, 10x jealous. i still woulda picked purple since i could only get 1... but DAMN that looks good.

Offline PoisonKing

  • Posts: 94
  • Location: wkwk land
  • RIP wallet
Re: KIRA60 by thesiscamper
« Reply #180 on: Mon, 19 February 2018, 21:15:12 »
I received mine yesterday after a 3-day weekend. I'm very happy with the quality of the case

Offline Asbrodeus

  • Posts: 87
  • Location: South Florida
Re: KIRA60 by thesiscamper
« Reply #181 on: Tue, 20 February 2018, 06:09:28 »


Had to use my other phone to try to get some decent lighting at work.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: KIRA60 by thesiscamper
« Reply #182 on: Tue, 20 February 2018, 08:05:55 »
is it just me, or are the plates like STUPID good too? Especially the brass one its even heavier than any of my other brass plates, and the notches are so clean.

Offline Asbrodeus

  • Posts: 87
  • Location: South Florida
Re: KIRA60 by thesiscamper
« Reply #183 on: Tue, 20 February 2018, 08:15:02 »
is it just me, or are the plates like STUPID good too? Especially the brass one its even heavier than any of my other brass plates, and the notches are so clean.

Everything about this is insanely high quality. They did an amazing job.

Offline afrokobe

  • Posts: 296
Re: KIRA60 by thesiscamper
« Reply #184 on: Tue, 20 February 2018, 09:11:07 »
where was I supposed to receive the tracking number?

Offline PoisonKing

  • Posts: 94
  • Location: wkwk land
  • RIP wallet
Re: KIRA60 by thesiscamper
« Reply #185 on: Tue, 20 February 2018, 09:52:16 »
My KIRA60 build is finished.
  • Zeal60 Rev 1.1
  • Zealio 67g R7
  • Lubed Gateron Black with milky bottom housing on spacebar
  • Zeal transparent stabilizers
  • Polycarbonate plate
  • GMK Oblivion Hagoromo



« Last Edit: Tue, 20 February 2018, 10:21:46 by PoisonKing »

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: KIRA60 by thesiscamper
« Reply #186 on: Tue, 20 February 2018, 17:11:49 »
Thank you for the photos, and I'm glad you guys like it  :thumb:


"haters are confused admirers"

Offline mudcakehoney

  • Posts: 352
  • Location: AU
Re: KIRA60 by thesiscamper
« Reply #187 on: Fri, 23 February 2018, 15:34:53 »
She’s beautiful I couldn’t be happier



Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: KIRA60 by thesiscamper
« Reply #188 on: Fri, 23 February 2018, 15:46:10 »
She’s beautiful I couldn’t be happier

Show Image
Show Image
Show Image


that's really nice
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: KIRA60 by thesiscamper
« Reply #189 on: Sat, 24 February 2018, 06:22:44 »
She’s beautiful I couldn’t be happier

Show Image
Show Image
Show Image


I really like how clean this looks, thank you for sharing!


"haters are confused admirers"

Offline mudcakehoney

  • Posts: 352
  • Location: AU
Re: KIRA60 by thesiscamper
« Reply #190 on: Sat, 24 February 2018, 07:43:16 »
No thank You for designing such a masterpiece!

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #191 on: Mon, 19 March 2018, 00:16:50 »
Finally had some time to build mine, happy that we got everyone's boards out  :thumb:

Cherry Silents in Zeal housings :D





more photos here.
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline ricyuyc

  • Posts: 143
  • Location: HKG
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #192 on: Mon, 19 March 2018, 05:21:23 »
Finally had some time to build mine, happy that we got everyone's boards out  :thumb:

Cherry Silents in Zeal housings :D

Show Image

Show Image

Show Image


more photos here.
I hope I would have a case in this kind of bluish grey color one day.  :p

Offline mudcakehoney

  • Posts: 352
  • Location: AU
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #193 on: Mon, 19 March 2018, 06:40:06 »
That looks crazy good in that blue beamingrobot!

Offline Asbrodeus

  • Posts: 87
  • Location: South Florida
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #194 on: Mon, 19 March 2018, 07:23:33 »
holy crap that blue looks so amazing. That combo is mouth watering.

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #195 on: Thu, 03 May 2018, 17:37:39 »
Wow....that blue is pretty awesome. I want it.

Anyway....these extra plates I bought are some of the nicest I have ever received. Is there anyway I can purchase more?

Offline lecorsair

  • Posts: 214
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #196 on: Thu, 03 May 2018, 20:07:05 »
So classy, with a hint of spunk.

Offline mudcakehoney

  • Posts: 352
  • Location: AU
KIRA60 by thesiscamper (100% shipped)
« Reply #197 on: Thu, 03 May 2018, 21:44:43 »
Just LOVE my Kira!



Sliver & Lime
« Last Edit: Thu, 03 May 2018, 21:50:20 by mudcakehoney »

Offline Jkush463

  • Posts: 367
  • Location: Aurora, IL
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #198 on: Tue, 24 July 2018, 18:26:40 »
some one sell me a green one of these there beautiful.

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: KIRA60 by thesiscamper (100% shipped)
« Reply #199 on: Tue, 24 July 2018, 18:46:17 »
some one sell me a green one of these there beautiful.

Don’t think that color was a part of the gb, green might be a one off