Are your eyes bleeding? You can always change your theme.
0 Members and 1 Guest are viewing this topic.
Does anyone know if the PCB will support a stepped control key?
Quote from: DJSnotBoogie on Sun, 12 August 2018, 20:13:18Does anyone know if the PCB will support a stepped control key?It's fixed layout, so no.
Quote from: xondat on Sun, 12 August 2018, 20:20:59Quote from: DJSnotBoogie on Sun, 12 August 2018, 20:13:18Does anyone know if the PCB will support a stepped control key?It's fixed layout, so no.Dam, just noticed this too. Not a deal breaker but would haven really liked stepped caps.
Quote from: Etherealsound on Mon, 13 August 2018, 00:45:15Quote from: xondat on Sun, 12 August 2018, 20:20:59Quote from: DJSnotBoogie on Sun, 12 August 2018, 20:13:18Does anyone know if the PCB will support a stepped control key?It's fixed layout, so no.Dam, just noticed this too. Not a deal breaker but would haven really liked stepped caps.Stepped caps on HHKB layout is illegal.
Has Rama released any timeline info on stabs? I’m sure it will be a while, but I’d love to put some on my new M60-A.
Anyone have any insight on stabilizers? I've read good things about zeal stabs and costar. Is this build meant to be used with PCB mount screw-in stabs?
Quote from: Steerpike on Tue, 14 August 2018, 11:08:39Anyone have any insight on stabilizers? I've read good things about zeal stabs and costar. Is this build meant to be used with PCB mount screw-in stabs?You need PCB mount stabilizers, yes.Most people think that GMK Screw-in stabilizers are the best stabs available right now.
Quote from: Lisinge on Tue, 14 August 2018, 12:31:09Quote from: Steerpike on Tue, 14 August 2018, 11:08:39Anyone have any insight on stabilizers? I've read good things about zeal stabs and costar. Is this build meant to be used with PCB mount screw-in stabs?You need PCB mount stabilizers, yes.Most people think that GMK Screw-in stabilizers are the best stabs available right now.I love GMK screw-in stabs, but I'm a little wary of them since I read that someone shorted their board out from the screws going through the PCB hitting their metal case. Pretty sure all my boards have plenty of clearance, but still freaks me out a little bit...
Quote from: nuclear_wizard on Tue, 14 August 2018, 15:06:49Quote from: Lisinge on Tue, 14 August 2018, 12:31:09Quote from: Steerpike on Tue, 14 August 2018, 11:08:39Anyone have any insight on stabilizers? I've read good things about zeal stabs and costar. Is this build meant to be used with PCB mount screw-in stabs?You need PCB mount stabilizers, yes.Most people think that GMK Screw-in stabilizers are the best stabs available right now.I love GMK screw-in stabs, but I'm a little wary of them since I read that someone shorted their board out from the screws going through the PCB hitting their metal case. Pretty sure all my boards have plenty of clearance, but still freaks me out a little bit...That's usually if the PCB isn't designed that well. Shouldn't be a problem on this PCB in particular because:1. Wilba designs good PCBs.2. Pads are generally not exposed due to the kailh sockets.If you are really worried you could just use some nylon washers.
Speaking of PCB's, they're in our warehouse! I'll take some photos tomorrow The finish came out much better than the prototype ones and are very matte now Dropping off a box to Wilba tonight
I wonder if this will ship before TM gets the packaging in for their keyboards. LOL
If someone decided they aren't interested, I'm looking to take their spot!Not picky on color either.
Speaking of PCB's, they're in our warehouse! I'll take some photos tomorrow The finish came out much better than the prototype ones and are very matte now
Quote from: KingRama on Wed, 15 August 2018, 00:30:47Speaking of PCB's, they're in our warehouse! I'll take some photos tomorrow The finish came out much better than the prototype ones and are very matte now Heya, did you get a chance to share these pictures?
Quote from: fcoury on Sat, 18 August 2018, 11:46:51Quote from: KingRama on Wed, 15 August 2018, 00:30:47Speaking of PCB's, they're in our warehouse! I'll take some photos tomorrow The finish came out much better than the prototype ones and are very matte now Heya, did you get a chance to share these pictures? Hey guys! So sorry, was supposed to post the photos the other day but have been caught up book-keeping for the past couple of days (and still going), just want to knock it off before I write-up something for the updates page I'll post these for now!Show ImageShow Image
No LEDs in that smoool PCB?? Refund please! JK! Can't wait to get mine!
Quote from: packman86 on Sun, 19 August 2018, 09:47:38No LEDs in that smoool PCB?? Refund please! JK! Can't wait to get mine!LOL maybe you can hack in a led to flash every time data flows through ---Finally got around to getting some time to write up some things in the updates blog [now Proto(Type)]Check it out here: https://rama.works/prototype/2018/8/20/m60-a-seq-4-m6-b-wave-seq-2
My god those PCBs are gorgeous!
Thanks for the update. The PCB looks really nice. You mentioned that a few enclosure colors have already been completed. Will you be receiving them beforehand so we can see some sweet pics?
just grabbed an M6-B to match my M60-A in Moon! I think it will be a nice combo...
Is this a case for 60%? Still possible to get?
I am interested in getting a Yarbo cable for this build. I’ve heard worrying things about the connector being so heavy that it could damage the USB port on the PCB. The case on the M60-A looks like it might reinforce this port a bit. Do you think this is the case or is it still potentially a problem?
Quote from: DJSnotBoogie on Wed, 22 August 2018, 20:03:42I am interested in getting a Yarbo cable for this build. I’ve heard worrying things about the connector being so heavy that it could damage the USB port on the PCB. The case on the M60-A looks like it might reinforce this port a bit. Do you think this is the case or is it still potentially a problem?Do you have a link or image of what the cable looks like?
Quote from: KingRama on Thu, 23 August 2018, 18:16:56Quote from: DJSnotBoogie on Wed, 22 August 2018, 20:03:42I am interested in getting a Yarbo cable for this build. I’ve heard worrying things about the connector being so heavy that it could damage the USB port on the PCB. The case on the M60-A looks like it might reinforce this port a bit. Do you think this is the case or is it still potentially a problem?Do you have a link or image of what the cable looks like? https://img.alicdn.com/imgextra/i3/57045316/TB2yYV7XEOO.eBjSZFLXXcxmXXa_!!57045316.jpg
Quote from: DJSnotBoogie on Thu, 23 August 2018, 19:47:08Quote from: KingRama on Thu, 23 August 2018, 18:16:56Quote from: DJSnotBoogie on Wed, 22 August 2018, 20:03:42I am interested in getting a Yarbo cable for this build. I’ve heard worrying things about the connector being so heavy that it could damage the USB port on the PCB. The case on the M60-A looks like it might reinforce this port a bit. Do you think this is the case or is it still potentially a problem?Do you have a link or image of what the cable looks like? https://img.alicdn.com/imgextra/i3/57045316/TB2yYV7XEOO.eBjSZFLXXcxmXXa_!!57045316.jpgHard to say, but should be fine given that circular part of the cable fits into the recess - else the new cable included with the M60-A will be metal (it's arriving next week - will show it then!)
Is the schedule on time for m60-a? Will it be shipped the end of next month? Just can't wait to get it.
Didn't realize a cable was going to be included! What's the length of the cable?
1.5M Just gotta get it released from customs and I'll have some photos !
Does anyone know which kind of aluminium alloy the M60-A is made from?Sent from my MIX using Tapatalk
can i get some hype in the chatA L L M E T A L
Hey Rama, are there any extra internal weights being produced? Any way of getting my hands on one for my order?
another question, I would like to purchase a second PCB, any chance?
Quote from: voight-kampff on Mon, 27 August 2018, 10:56:42Does anyone know which kind of aluminium alloy the M60-A is made from?Sent from my MIX using Tapatalkprobably 6061/6063
I never thought this day would come...
Yep! Just reply to your order email