« previous next »
Pages:  [1]     Go Down

Author Topic: 【IC】CLAP ARTISAN WRIST REST  (Read 3940 times)

0 Members and 1 Guest are viewing this topic.

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
【IC】CLAP ARTISAN WRIST REST
« on: Tue, 30 August 2022, 09:33:28 »
Hello Geekhackers, today I want to present you a artisan wrist rest.
Front height：20MM
Length：318MM (works with most 60-65%)
Width：80MM
Typing angle：6.5°
The wrist rest can hold 13 artisans with height no higher than 14MM
The specs:
6063 Aluminum
Ano: Silver and black
PC Cap to prevent dust
Walnut wood with wood wax coat
Magnets X8 to hold the wood onto the casing

Photos of the R2 Prototypes https://imgur.com/gallery/wTNrH5K

MOQ 100 sets
MSRP US 120USD+domestic shipping and tax
MSRP worldwide 100USD+international shipping and duty

Worldiwde vendor: https://keyspensory.store/
Non US customers will be shipped directly from China

Please fill in the google forms if you are interested! https://forms.gle/5h93n1VLSocybyqm8

Thank you!

Discord:discord.gg/C7rPhkAr3U
Instagram:https://www.instagram.com/clap__studio__/
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #1 on: Tue, 30 August 2022, 09:34:23 »
Reserved :)
Logged

Offline 360Ceeee

  • Posts: 6
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #2 on: Tue, 30 August 2022, 10:43:35 »
Looks good for me
Logged

Offline Kokaloo

  • Posts: 1014
  • Location: Las Vegas
  • 🤘(• ω •)🤙
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #3 on: Tue, 30 August 2022, 19:01:53 »
does this support topre artisans?
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #4 on: Tue, 30 August 2022, 22:43:44 »
Quote from: Kokaloo on Tue, 30 August 2022, 19:01:53
does this support topre artisans?

The dimension for the artisans are 22*22MM with height no over 14MM
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #5 on: Tue, 30 August 2022, 22:44:06 »
Logged

Offline Nuap

  • Posts: 188
  • Location: Australia
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #6 on: Tue, 30 August 2022, 23:10:53 »
Wow very nice artisan wristrest, when I get one I'll be sure to proudly let everyone know "I GOT THE CLAP".

Now for some real feedback: I can't see any easy way to remove the lid ("PC cap"). It seems like when it's in palce it'd be hard to remove without a suction cup or turning the wrist rest upside down (and therefore potentially scattering your priceless resin). Other lidded cases implement tabs in their lid that allow you to get some grip to lift them up, see the Naptime if you want an excellent example.
Logged

Offline iNKY Studio

  • Posts: 121
  • long-term partner with Domikey
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #7 on: Tue, 30 August 2022, 23:58:12 »
a bao wo di shen
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #8 on: Wed, 31 August 2022, 00:14:47 »
Quote from: Nuap on Tue, 30 August 2022, 23:10:53
Wow very nice artisan wristrest, when I get one I'll be sure to proudly let everyone know "I GOT THE CLAP".

Now for some real feedback: I can't see any easy way to remove the lid ("PC cap"). It seems like when it's in palce it'd be hard to remove without a suction cup or turning the wrist rest upside down (and therefore potentially scattering your priceless resin). Other lidded cases implement tabs in their lid that allow you to get some grip to lift them up, see the Naptime if you want an excellent example.

Ooooops MY BAD! I forgot to mention the suction cup that will be provided in the set! Thanks for noticing!!
I have also been thinking about implementing a small cutout on both ends of the PC cap, which might be easier for users, in case the suction cup is lost!
Thanks for the good feedbacks!
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #9 on: Wed, 31 August 2022, 00:52:58 »
Logged

Offline akejojo

  • Posts: 7
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #10 on: Wed, 31 August 2022, 08:44:24 »
a bao li hai bang bang bang
Logged

Offline Morbii

  • Posts: 86
  • Location: The Depths
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #11 on: Thu, 01 September 2022, 15:48:08 »
This looks great, and I'm definitely interested depending on when the GB comes up. 

I'm with the others that mentioned a tab instead of a suction cup as being preferrable.
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #12 on: Fri, 02 September 2022, 23:34:51 »
Quote from: Morbii on Thu, 01 September 2022, 15:48:08
This looks great, and I'm definitely interested depending on when the GB comes up. 

I'm with the others that mentioned a tab instead of a suction cup as being preferrable.

Thanks! And yes we'll be changing the design of the PC cap. For the GB date we're not sure just yet, we'll be sure to update! 
Logged

Offline less_blank

  • Posts: 77
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #13 on: Sat, 03 September 2022, 18:32:56 »
Looks awesome, will definitely be in for one. Only nitpicks I have are I'd prefer a completely clear window rather than slightly frosted and would prefer no logo, but I'm in either way!
Logged

Offline CLAP_STUDIO

  • Thread Starter
  • Posts: 39
Re: 【IC】CLAP ARTISAN WRIST REST
« Reply #14 on: Tue, 06 September 2022, 00:19:50 »
Quote from: less_blank on Sat, 03 September 2022, 18:32:56
Looks awesome, will definitely be in for one. Only nitpicks I have are I'd prefer a completely clear window rather than slightly frosted and would prefer no logo, but I'm in either way!

Thank you for liking and the feedbacks! Will definitely consider clear PC cap option!
Logged
Pages:  [1]     Go Up
« previous next »