Author Topic: [GB COMPLETE] SaiB - CP (Read 126319 times)

LightningXI · « **Reply #450 on:** Wed, 01 August 2018, 14:31:03 »

Quote from: aznreaper on Wed, 01 August 2018, 14:19:05

Pretty sure he said during the ic that he didn't plan to do a GB for a weight, I'd be interested though. Did you guys get tracking numbers when he sent out the board?

Bummer about the weight. I was hoping to see a cool weight there. I hope we can get the measurements though for both the weight and the screws that would hold it.

I didn't get tracking info. It just showed up.

Vloshko · « **Reply #451 on:** Wed, 01 August 2018, 16:54:11 »

Anyone on the West Coast or close to there get their board yet?

dubious · « **Reply #452 on:** Wed, 01 August 2018, 16:59:22 »

Quote from: Vloshko on Wed, 01 August 2018, 16:54:11

Anyone on the West Coast or close to there get their board yet?

West coast here. I've received mine, but they weren't all sent out at the same time so it's irrelevant.

odd · « **Reply #453 on:** Mon, 06 August 2018, 20:41:58 »

Quote from: Vloshko on Wed, 01 August 2018, 16:54:11

Anyone on the West Coast or close to there get their board yet?

I'm in the Bay Area and got mine last Friday.

forumusername · « **Reply #454 on:** Mon, 06 August 2018, 20:46:26 »

I haven't gotten any tracking notice nor a board.

edit:

I have now sent the approval email 3 times.

Eggplant · « **Reply #455 on:** Mon, 06 August 2018, 20:53:20 »

Mine came in last Friday! (I was #10, located in the midwest)

Here are some pictures of it next to my tx-cp:

(67g Zilents, Zeal Stabs, GMK Laser, DC Mini Reaper on the left, Keyforge Snek and Spook on the right)

I and I'm sure everyone else appreciate all the effort and complications you had to endure PainMaster!

Thank you for putting everything together and ensuring such a fantastic product made it into all of our hands!

kimbles · « **Reply #456 on:** Tue, 07 August 2018, 11:50:02 »

I sent an approval email but not sure where I stand in the shipping order?

PainMaster · « **Reply #457 on:** Wed, 08 August 2018, 02:08:12 »

> 2018-08-08 Update.

SaiB - CP GroupBuy Complete !!!
Send Clear !!!

I'm really sorry for the late shipment.
There is a lot of business issues. (Server down / Traffic over / etc etc... T^T) - Damn Openfire Custom !!!
I was out of time to shipping.

It was very difficult to Packaging.
because, I ordered the box Sooooooooooooooooo big.

I didn't expect the delivery charge to be this expensive.
I've lost money a little, but it's okay.
It's my first challenge, Anyway I've done it.

add 1)
The Bottom weight plate design document will be open.

add 2)
Details of defective products Starting tomorrow,
Shipping is scheduled for 8/14.

add 0)
Last time refund processing is priority...

#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#5 - Complete
#6 - Complete
#7 - Complete
#8 - Complete
#9 - Complete
#10 - Complete
#11 - Complete
#12 - Complete
#13 - Cancel
#14 - Complete
#15 - Send
#16 - Cancel
#17 - Send
#18 - Send
#19 - Send
#20 - Send
#21 - Send
#22 - Send

angelafreet · « **Reply #458 on:** Wed, 08 August 2018, 17:44:56 »

8/3 come in

http://playkeyboard01.pixnet.net/blog/post/204519983-saib-cp-%e9%8d%b5%e7%9b%a4%e5%a5%97%e4%bb%b6-keyboard-kit-review

haitacxyz · « **Reply #459 on:** Sun, 12 August 2018, 09:01:33 »

Thank for your review.

forumusername · « **Reply #460 on:** Mon, 13 August 2018, 18:59:28 »

Got my board in today, when checking the PCB the point right of f12 doesn't register and is marked KEC1... can someone educate me as to what this key is supposed to do? I assume it works but want to be certain.

Thanks in advance all

aznreaper · « **Reply #461 on:** Tue, 14 August 2018, 16:01:12 »

Have you tried checking it in jigion, and is that the only key that doesn't seem to do anything? There should be a key that acts as a function key, so if it doesn't seem like it's doing anything initially, open jigion software and it should show you if it reads the keypress and if it's programmed as the function key

aznreaper · « **Reply #462 on:** Wed, 15 August 2018, 00:38:05 »

Just got my board, the box is so big, and there was so much packing

Board looks good, and sure has some heft to it. The anod isn't the smoothest, especially on top, but mine seem to be in really good condition, don't really see any nicks or scratches or anything.

Looking forwards to building this one, it took a while, but the value of this board was amazing.

Thanks Painmaster for making this happen!

PainMaster · « **Reply #463 on:** Sat, 18 August 2018, 11:09:16 »

Hi everyone long time no see.

I had a very hard time after delivery.

Did you get all the shipping?

PS : Refund complete! & time to sell the defective product!

liillliillliiii · « **Reply #464 on:** Sat, 18 August 2018, 13:39:27 »

PainMaster,

I have not received anything for #17. Can you email/pm me a tracking number?

Thanks

kimbles · « **Reply #465 on:** Sat, 18 August 2018, 18:23:52 »

Got my board, thank you for your efforts PainMaster.

수고했어요!

PainMaster · « **Reply #466 on:** Sun, 19 August 2018, 07:29:41 »

Of course, I sent you a PM.

Quote from: liillliillliiii on Sat, 18 August 2018, 13:39:27

PainMaster,

I have not received anything for #17. Can you email/pm me a tracking number?

Thanks

PainMaster · « **Reply #467 on:** Sun, 19 August 2018, 07:41:39 »

Quote from: liillliillliiii on Sat, 18 August 2018, 13:39:27

PainMaster,

I have not received anything for #17. Can you email/pm me a tracking number?

Thanks

SaiB - CP arrived nearby on August 10.
It is reported that the address was incorrect and could not be shipped.
Hurry up and check.

PainMaster · « **Reply #468 on:** Mon, 20 August 2018, 02:45:20 »

> 2018-08-20 Update.

> issue

The firmware version did not match as a result of testing and finding that the RGB control of the latest tool was incorrect.

> Solution

Please upload the latest version of the firmware.

> the latest version firmware

L3_171209.zip (91.58 kB - downloaded 93 times.)

1. unzip
2. SaiB-CP connect
3. Run loadfw.bat

> the latest version JigOn (keymapping Tool)

JigOn_170419.zip (373.68 kB - downloaded 90 times.)

Sshimosawa · « **Reply #469 on:** Tue, 21 August 2018, 19:38:23 »

Has anyone made a brass weight for theirs?

If not, OP would you mind sharing the measurements of the slot on the underside if you have it?

PainMaster · « **Reply #470 on:** Tue, 21 August 2018, 23:35:16 »

Quote from: Sshimosawa on Tue, 21 August 2018, 19:38:23

Has anyone made a brass weight for theirs?

If not, OP would you mind sharing the measurements of the slot on the underside if you have it?

The bottom's weight plate document will be opened.

I'm looking for an error.

Sshimosawa · « **Reply #471 on:** Wed, 22 August 2018, 00:06:39 »

Huge thank you. Whenever you can would be great!

Vloshko · « **Reply #472 on:** Fri, 24 August 2018, 18:41:49 »

Board received, starting build soon, will post photos of everything.

LightningXI · « **Reply #473 on:** Fri, 24 August 2018, 20:52:07 »

Quote from: Vloshko on Fri, 24 August 2018, 18:41:49

Board received, starting build soon, will post photos of everything.

Best of luck, and excited to see the build log!

PainMaster · « **Reply #474 on:** Sun, 26 August 2018, 23:26:07 »

Quote from: Vloshko on Fri, 24 August 2018, 18:41:49

Board received, starting build soon, will post photos of everything.

Looking forward to it!

Sshimosawa · « **Reply #475 on:** Sun, 02 September 2018, 19:22:16 »

Hey Mr Painmaster, just shot you a PM re: the brass plate measurements and another question.

bthezebra · « **Reply #476 on:** Mon, 03 September 2018, 21:34:40 »

Finally built mine can't wait to bring to work tomorrow

PainMaster · « **Reply #477 on:** Mon, 03 September 2018, 22:29:53 »

Quote from: bthezebra on Mon, 03 September 2018, 21:34:40

Finally built mine can't wait to bring to work tomorrow
Show Image

it's My workSet :)

ihalatch · « **Reply #478 on:** Tue, 04 September 2018, 23:14:02 »

I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?

bthezebra · « **Reply #479 on:** Tue, 04 September 2018, 23:29:57 »

Quote from: ihalatch on Tue, 04 September 2018, 23:14:02

I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?

A weight was never included but a few posts above some users might be looking to get one made. I would hop on one of those if they open it to the group and would also be interested in a polycarbonate plate for softer typing feel.

LightningXI · « **Reply #480 on:** Wed, 05 September 2018, 00:16:02 »

Quote from: ihalatch on Tue, 04 September 2018, 23:14:02

I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?

It wasn't included in the base kit, so PainMaster should be sharing the files for owners to get their own independently.

Quote from: PainMaster on Wed, 08 August 2018, 02:08:12

add 1)
The Bottom weight plate design document will be open.

Hey PainMaster, have you shared the plate and weight design file yet? If not, it would be nice to have it released so people can figure out a way to get a weight done for their SaiB-CPs

zoois · « **Reply #481 on:** Tue, 11 September 2018, 04:48:30 »

Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

LightningXI · « **Reply #482 on:** Tue, 11 September 2018, 05:45:54 »

Quote from: zoois on Tue, 11 September 2018, 04:48:30

Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

Wow great attention to detail. Looks absolutely phenomenal.

Sent from my mobile using Tapatalk

PainMaster · « **Reply #483 on:** Tue, 11 September 2018, 07:23:58 »

Quote from: zoois on Tue, 11 September 2018, 04:48:30

Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

WOW- It's My Pleasure

donut_sauce · « **Reply #484 on:** Tue, 11 September 2018, 07:31:13 »

Quote from: zoois on Tue, 11 September 2018, 04:48:30

Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

This board is amazing wow!

PainMaster · « **Reply #485 on:** Fri, 28 September 2018, 02:39:57 »

> 2018-09-28 Update.

SaiB - CP's Bottom weight plate Document Open !

You can edit it, as long as you specify the source (SaiB - CP).

CP_BOTTOM PLATE.zip (36.24 kB - downloaded 91 times.)

Sshimosawa · « **Reply #486 on:** Fri, 28 September 2018, 03:05:44 »

Awesome. Thank you!

LightningXI · « **Reply #487 on:** Fri, 28 September 2018, 11:55:21 »

Quote from: PainMaster on Fri, 28 September 2018, 02:39:57

> 2018-09-28 Update.

SaiB - CP's Bottom weight plate Document Open !

You can edit it, as long as you specify the source (SaiB - CP).

(Attachment Link)

Thank you!! Now to find out if someone could help us make a weight...

Eggplant · « **Reply #488 on:** Fri, 28 September 2018, 12:08:02 »

Nice!

Count me in, if someone can make it happen.

wholypantalones · « **Reply #489 on:** Fri, 28 September 2018, 22:06:49 »

Quote from: LightningXI on Fri, 28 September 2018, 11:55:21

Quote from: PainMaster on Fri, 28 September 2018, 02:39:57
> 2018-09-28 Update.

SaiB - CP's Bottom weight plate Document Open !

You can edit it, as long as you specify the source (SaiB - CP).

(Attachment Link)

Thank you!! Now to find out if someone could help us make a weight...

What aboot that lazerboost place?

ihalatch · « **Reply #490 on:** Sun, 30 September 2018, 03:32:30 »

I've just built mine: lubed, stickered and sip-socketed silent black MX switches and GMK Dolch.

LightningXI · « **Reply #491 on:** Sat, 20 October 2018, 01:45:52 »

Edit: asked a dumb question.

PainMaster · « **Reply #492 on:** Sat, 20 October 2018, 02:51:14 »

Quote from: LightningXI on Sat, 20 October 2018, 01:45:52

Edit: asked a dumb question.

Hmm ??

LightningXI · « **Reply #493 on:** Sat, 20 October 2018, 09:51:02 »

Quote from: PainMaster on Sat, 20 October 2018, 02:51:14

Quote from: LightningXI on Sat, 20 October 2018, 01:45:52
Edit: asked a dumb question.

Hmm ??

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

PainMaster · « **Reply #494 on:** Sat, 20 October 2018, 17:46:51 »

Quote from: LightningXI on Sat, 20 October 2018, 09:51:02

Quote from: PainMaster on Sat, 20 October 2018, 02:51:14
Quote from: LightningXI on Sat, 20 October 2018, 01:45:52
Edit: asked a dumb question.

Hmm ??

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

bthezebra · « **Reply #495 on:** Sat, 20 October 2018, 18:11:09 »

Quote from: PainMaster on Sat, 20 October 2018, 17:46:51

Quote from: LightningXI on Sat, 20 October 2018, 09:51:02
Quote from: PainMaster on Sat, 20 October 2018, 02:51:14
Quote from: LightningXI on Sat, 20 October 2018, 01:45:52
Edit: asked a dumb question.

Hmm ??

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

I'd love polycarbonate personally

LightningXI · « **Reply #496 on:** Sat, 20 October 2018, 18:29:57 »

Quote from: PainMaster on Sat, 20 October 2018, 17:46:51

Quote from: LightningXI on Sat, 20 October 2018, 09:51:02
Quote from: PainMaster on Sat, 20 October 2018, 02:51:14
Quote from: LightningXI on Sat, 20 October 2018, 01:45:52
Edit: asked a dumb question.

Hmm ??

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

I would do brass and/or polycarbonate.

Carlobv · « **Reply #497 on:** Mon, 05 November 2018, 08:41:17 »

Did anyone ever make a weight for this (or have instructions for someone clueless on how to do so)? I just bought one of these, and I'm really happy with it, but I'd like to get a weight as well.

dubious · « **Reply #498 on:** Mon, 05 November 2018, 15:53:30 »

Quote from: PainMaster on Sat, 20 October 2018, 17:46:51

Quote from: LightningXI on Sat, 20 October 2018, 09:51:02
Quote from: PainMaster on Sat, 20 October 2018, 02:51:14
Quote from: LightningXI on Sat, 20 October 2018, 01:45:52
Edit: asked a dumb question.

Hmm ??

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

My vote is for PC or brass!

flying1911 · « **Reply #499 on:** Sat, 16 February 2019, 22:48:12 »

Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.

Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.

News:

Author Topic: [GB COMPLETE] SaiB - CP (Read 126319 times)