Are your eyes bleeding? You can always change your theme.
0 Members and 1 Guest are viewing this topic.
Is it possible to get a TLDR about the custom PC plate working or not working with TX87 PCB? I'm traveling and on super slow internet, with limited time to read. Not talking about case compatibility but rather stabilizer placement and orientation.
It comes down to two things: plate (for stab orientation) and footprint (for whether or not it'll fit into the case)The plate varies case by case, so it's hard to know for sure without testing. While stab orientation may not matter in the Mira, it might matter in an LZ CLS or an Eqaulz 80. The B.87 standard is smaller than A.87, and the USB port is mounted differently on the Z-axis. This, again, comes down to a case-by-case basis. Some cases will have the USB port in a place that allows for easier access of a B.87 port, and some cases may not have the space to allow for an A.87 port. The problem comes in with the TX87, which uses a slightly modified A.87 standard. This makes it closer to the size of a B.87 PCB, while still maintaining some aspects of an A.87 (stab orientation, USB port placement). So, by my understanding, for any case that is confirmed to work with TX87, B.87 is the PCB to buy from this GB due to the slightly modified USB port placement to better suit A.87 cases. However, it mostly comes down to the case you're using. In some cases, the stab wires can only be used in one direction (TGR A.17 comes to mind)This is my understanding of the situation.
Is it possible to get a TLDR about the custom PC plate working or not working with TX87 PCB? I'm traveling and on super slow internet, with limited time to read. Not talking about case compatibility but rather stabilizer placement and orientation. I've been considering getting the PC plate for my MiRA SE to use with tX87 PCB.
Quote from: Photoelectric on Wed, 30 May 2018, 21:14:22Is it possible to get a TLDR about the custom PC plate working or not working with TX87 PCB? I'm traveling and on super slow internet, with limited time to read. Not talking about case compatibility but rather stabilizer placement and orientation. I've been considering getting the PC plate for my MiRA SE to use with tX87 PCB.Sorry i don't know what is TLDR. Our Mira PC plate is compatiable for Tx.87 PCB as well. So this should not be a problem...
do your polycarb plates have uv resistance coating
Hi, hopefully this will be my first PCB purchase, will this come with all the LED's and diodes pre soldered like in the pictures?Sorry if this is a silly question also, How will we know if we are are selected to be in the GB?
any chance for alps support?
Hi, I am back. Just send out all the invoices. I will give you guys some time to pay for it. The leadtime will remain the same. Thanks everyone for all your love
is it too late to order
I put in a form for a pcb but never ended up getting a invoice
PCB is ready and we have received them. We are testing them right now and will be send out asap.
Quote from: C³—Ears on Fri, 17 August 2018, 07:34:32PCB is ready and we have received them. We are testing them right now and will be send out asap.Great! How about the polycarbonate plates?
The form is still open, are you still taking orders or have extras?
Hi everyonePacking is here. We are ready to go. (Attachment Link)
Quote from: vtachkov on Sat, 18 August 2018, 13:26:20The form is still open, are you still taking orders or have extras?Sorry forget to close it....
Quote from: C³—Ears on Sat, 18 August 2018, 14:03:16Quote from: vtachkov on Sat, 18 August 2018, 13:26:20The form is still open, are you still taking orders or have extras?Sorry forget to close it....Aw, well if there are any extras after the current orders ship out, I'd be interested in one.
Is there a possibility that this PCB will see a second run?
I would be extremely pleased if someone with a TX87/TX84SE could double check fit. I'd love to snag an extra and a poly plate, if they do.
Quote from: razor_blade on Wed, 05 September 2018, 21:46:23I would be extremely pleased if someone with a TX87/TX84SE could double check fit. I'd love to snag an extra and a poly plate, if they do.This is supposed to fit MIRA SE, and MIRA SE was distributed with TX87 PCBs. So it should fit in TX86/TX84SE.
Quote from: Photoelectric on Thu, 06 September 2018, 12:21:49Quote from: razor_blade on Wed, 05 September 2018, 21:46:23I would be extremely pleased if someone with a TX87/TX84SE could double check fit. I'd love to snag an extra and a poly plate, if they do.This is supposed to fit MIRA SE, and MIRA SE was distributed with TX87 PCBs. So it should fit in TX86/TX84SE.The pcb offered here will fit both those boards but the polycarb plate c3 is offering will not fit either one of those boards