Author Topic: What did you add to your Keyboard today? - Post Your Pics (Read 4577538 times)

CommonCurt · « **Reply #8900 on:** Fri, 15 May 2015, 16:40:19 »

Quote from: JaccoW on Fri, 15 May 2015, 15:49:09

Quote from: leesofi on Tue, 12 May 2015, 09:41:10
#01a8dc on #f3753a

Show Image

I still love that board of yours Leesofi. <3

Yep, one of the best looking acrylic cased boards.

Glod · « **Reply #8901 on:** Fri, 15 May 2015, 20:29:11 »

just finished my red scarf III with gateron blacks and no plate. used dolch

in switch LEDs will come later when i figure out the correct ones to use (the color i want i mean), i may not put in any at all

these pictures didnt come out good

----

Nice 1976 guys

rm-rf · « **Reply #8902 on:** Fri, 15 May 2015, 20:37:30 »

that board looks good to me glod! i can't wait till i have one of those rsIII's myself!

iammbox · « **Reply #8903 on:** Sat, 16 May 2015, 05:09:05 »

had to swap out the WASD since I've been playing FPS lately

ishpeck · « **Reply #8904 on:** Sun, 17 May 2015, 10:53:32 »

sethk_ · « **Reply #8905 on:** Sun, 17 May 2015, 18:21:41 »

No picture because I don't want to take the caps off again, but I clipped the stabs on my cherry stabs and they feel so much better. The only negative side so far is that I can hear the spacebar springing back up, but I could fix it if I wanted to.

Joey Quinn · « **Reply #8906 on:** Sun, 17 May 2015, 19:11:32 »

Quote from: ishpeck on Sun, 17 May 2015, 10:53:32

Show Image

What set is that?

sethk_ · « **Reply #8907 on:** Sun, 17 May 2015, 20:00:11 »

Quote from: Joey Quinn on Sun, 17 May 2015, 19:11:32

Quote from: ishpeck on Sun, 17 May 2015, 10:53:32
Show Image

What set is that?

Symbiosis

naasfu · « **Reply #8908 on:** Wed, 20 May 2015, 20:45:50 »

Aurebesh black on black from Ivan's PBT round 3 on my WASD V2:

IvanIvanovich · « **Reply #8909 on:** Wed, 20 May 2015, 21:31:56 »

Modded my Noppoo Lolita today. Pulled out the Noppoo Gaote switches and replaced them with vintage Cherry clicky clears and changed the LEDs to cyan and magenta.

appleonama · « **Reply #8910 on:** Wed, 20 May 2015, 22:09:58 »

Bought a Duck eagle built with 62g clears from a user on r/mech. I replaced the stabilizers because they were a bit wonky and added sip sockets to each switch. I also Replaced the space bar with a black gateron switch and added green leds.

IvanIvanovich · « **Reply #8911 on:** Wed, 20 May 2015, 22:50:38 »

Add the keycaps, now it's party time!

sethk_ · « **Reply #8912 on:** Thu, 21 May 2015, 10:50:00 »

Quote from: IvanIvanovich on Wed, 20 May 2015, 21:31:56

Modded my Noppoo Lolita today. Pulled out the Noppoo Gaote switches and replaced them with vintage Cherry clicky clears and changed the LEDs to cyan and magenta.
(Attachment Link)
(Attachment Link)

What are clicky clears?

Hzza · « **Reply #8913 on:** Thu, 21 May 2015, 11:01:36 »

Really early blues/greens more or less.

I have one on my Phantom, I'm not a massive clicky switch fan/user but I'd say its slightly heavier than a blue.

Really nice board though Ivan, Disco Lolita

)

MAR82 · « **Reply #8914 on:** Thu, 21 May 2015, 11:15:06 »

Quote from: pwnnarwhal on Thu, 21 May 2015, 10:50:00

Quote from: IvanIvanovich on Wed, 20 May 2015, 21:31:56
Modded my Noppoo Lolita today. Pulled out the Noppoo Gaote switches and replaced them with vintage Cherry clicky clears and changed the LEDs to cyan and magenta.
(Attachment Link)
(Attachment Link)
What are clicky clears?

As far as I know the vintage MX White switches had a translucent white stems, like those that are used by MX Clear switches today.
So I think he's using vintage Cherry MX Whites. I'm also using MX Whites, and love them!

FreeChemicals · « **Reply #8915 on:** Thu, 21 May 2015, 13:36:44 »

Swapped my spacebar for a 7u one, and put Desko on it:

Feels so much better than the cheap Tai Hao set I've used previously

HoffmanMyster · « **Reply #8916 on:** Thu, 21 May 2015, 15:02:34 »

Quote from: IvanIvanovich on Wed, 20 May 2015, 22:50:38

Add the keycaps, now it's party time!
(Attachment Link)

It's so weird seeing a TKL on your desk. Looks good though.

hwood34 · « **Reply #8917 on:** Thu, 21 May 2015, 15:13:14 »

Quote from: FreeChemicals on Thu, 21 May 2015, 13:36:44

Swapped my spacebar for a 7u one, and put Desko on it:

Show Image

Feels so much better than the cheap Tai Hao set I've used previously ;D

Nice set! Looks like it's in really good condition too

IvanIvanovich · « **Reply #8918 on:** Thu, 21 May 2015, 16:26:19 »

Right, clicky clears are first generation MX click switch. Slider has no pigment, just like tactile clear. There was also no cam bumps next to the stem like there are on blues, green, and modern white. They are lighter than modern white, little heavier than modern blue and have a very soft click sound but still sharp feel tactility. They also seem to have much less hysteresis than blues... but maybe it's just my imagination.
I had to cave and get a TKL... so I got the smallest one I could find. playing some games that MUST force you to use Fkeys, or some old pre-mouse era games where you have to use wasd+cursors at the same time... too frustrating with a 60% and I don't like having to rearrange my whole damn desk to fit a G80-3000 or something which is only 2KRO and game fail anyway. It's not replacing my GH60 as my primary keyboard at all though.

CommonCurt · « **Reply #8919 on:** Thu, 21 May 2015, 16:49:39 »

Quote from: FreeChemicals on Thu, 21 May 2015, 13:36:44

Swapped my spacebar for a 7u one, and put Desko on it:

Show Image

Feels so much better than the cheap Tai Hao set I've used previously ;D

Looking good.

Do you have Sprit's Clear Frosted, or White Frosted plate on there?

Karura · « **Reply #8920 on:** Thu, 21 May 2015, 21:07:47 »

New Cap Day [Stealth]
(Thanks Ivan!)

FreeChemicals · « **Reply #8921 on:** Fri, 22 May 2015, 04:19:18 »

Quote from: hwood34 on Thu, 21 May 2015, 15:13:14

Quote from: FreeChemicals on Thu, 21 May 2015, 13:36:44
Swapped my spacebar for a 7u one, and put Desko on it:

Show Image

Feels so much better than the cheap Tai Hao set I've used previously ;D
Nice set! Looks like it's in really good condition too

Thank you. The set has a few blemishes, but I found someone willing to sell me a few Desko keycaps as replacements!

Quote from: CommonCurt on Thu, 21 May 2015, 16:49:39

Quote from: FreeChemicals on Thu, 21 May 2015, 13:36:44
Swapped my spacebar for a 7u one, and put Desko on it:

Show Image

Feels so much better than the cheap Tai Hao set I've used previously

Looking good.

Do you have Sprit's Clear Frosted, or White Frosted plate on there?

Thanks! This is the White Frosted plate.

Quote from: Karura on Thu, 21 May 2015, 21:07:47

New Cap Day [Stealth]
(Thanks Ivan!)

Show Image

That looks very good. I should really get that set as well!

septamber · « **Reply #8922 on:** Fri, 22 May 2015, 19:17:03 »

Added my knock off grape ape gamer set

)

billnye · « **Reply #8923 on:** Sat, 23 May 2015, 11:10:39 »

Quote from: IvanIvanovich on Wed, 20 May 2015, 22:50:38

Add the keycaps, now it's party time!
(Attachment Link)

Very rare pink arrow keys

IvanIvanovich · « **Reply #8924 on:** Sat, 23 May 2015, 12:39:16 »

Hah yeah, perhaps the only ones. I got those from GMK as color sample when I was starting the first groupbuy with the CMYK.

hwood34 · « **Reply #8925 on:** Sat, 23 May 2015, 14:55:36 »

lmao jk wrong page

mason · « **Reply #8926 on:** Sat, 23 May 2015, 18:58:39 »

put gateron blacks into the 1800

Prelim · « **Reply #8927 on:** Sun, 24 May 2015, 04:49:04 »

Quote from: mason on Sat, 23 May 2015, 18:58:39

put gateron blacks into the 1800

(Attachment Link)

any difference on using just the Gateron sliders instead of Cherry ones?

mason · « **Reply #8928 on:** Sun, 24 May 2015, 10:29:58 »

Quote from: Prelim on Sun, 24 May 2015, 04:49:04

Quote from: mason on Sat, 23 May 2015, 18:58:39
put gateron blacks into the 1800

(Attachment Link)

any difference on using just the Gateron sliders instead of Cherry ones?

can't really say much because when I pulled a keycap off with the gateron slider 1 out of the 4 tabs would pop off
I would assume that it's pretty similar

altrunox · « **Reply #8929 on:** Sun, 24 May 2015, 12:49:02 »

Quote from: Smeagol_RP on Tue, 17 December 2013, 16:13:40

Show Image

Now on my Leopold FC 660M, amazing set! ;D
Just need a new right shift.

Sorry for the potato picture...

Wannabe · « **Reply #8930 on:** Sun, 24 May 2015, 15:33:54 »

3d printed Cthulhu that I printed on work's Zortrax on Noppoo Choc Mini w/ MX Blues.

Joey Quinn · « **Reply #8931 on:** Sun, 24 May 2015, 18:43:34 »

I added CMYW, ChemBro, and a Bunnylake Cap

naasfu · « **Reply #8932 on:** Sun, 24 May 2015, 20:50:45 »

Quote from: Joey Quinn on Sun, 24 May 2015, 18:43:34

I added CMYW, ChemBro, and a Bunnylake Cap

(Attachment Link)

(Attachment Link)

(Attachment Link)

Ooh that bunny cap looks nice. Looks like Miami colors?

Joey Quinn · « **Reply #8933 on:** Sun, 24 May 2015, 20:56:52 »

Quote from: naasfu on Sun, 24 May 2015, 20:50:45

Ooh that bunny cap looks nice. Looks like Miami colors?

It's probably Miami but it matches CMY very well.

I also have a Bunny arrow set, his caps look great!

retrochick · « **Reply #8934 on:** Sun, 24 May 2015, 21:08:29 »

Quote from: Joey Quinn on Sun, 24 May 2015, 20:56:52

Quote from: naasfu on Sun, 24 May 2015, 20:50:45
Ooh that bunny cap looks nice. Looks like Miami colors?

It's probably Miami but it matches CMY very well.

(Attachment Link)

I also have a Bunny arrow set, his caps look great!

Awesome caps Joey! Love the spotted one.

GeorgeK · « **Reply #8935 on:** Tue, 26 May 2015, 11:37:12 »

Today I have mostly been putting freshly cleaned caps back on my model f

snoopy · « **Reply #8936 on:** Fri, 29 May 2015, 10:19:36 »

I love HO in combination with APL. :-)

Dog · « **Reply #8937 on:** Fri, 29 May 2015, 12:27:04 »

I put the think different keyset on my code keyboard at work.

Joey Quinn · « **Reply #8938 on:** Fri, 29 May 2015, 14:35:58 »

Quote from: snoopy on Fri, 29 May 2015, 10:19:36

I love HO in combination with APL. :-)
Show Image

That's an awesome keyset... and Kish... and clack. How many Kishsavers do you have now?

snoopy · « **Reply #8939 on:** Fri, 29 May 2015, 15:10:33 »

Quote from: Joey Quinn on Fri, 29 May 2015, 14:35:58

Quote from: snoopy on Fri, 29 May 2015, 10:19:36
I love HO in combination with APL. :-)
Show Image

That's an awesome keyset... and Kish... and clack. How many Kishsavers do you have now?

Two that are now fully restaurated and one that still needs a lot of work until its usable again (rust, dents, missing parts,...)

sethk_ · « **Reply #8940 on:** Sat, 30 May 2015, 03:25:30 »

I clipped the stabs on my 3700HQAUS. Couldn't be bothered to do it before, but I am not able to sleep, so now was as good as any time to do so. If you have Cherry Stabs and you haven't clipped your stabs, you should do it.

ashcrow · « **Reply #8941 on:** Sun, 31 May 2015, 01:43:49 »

i am new to this. recently got this leopold fc750r. changed the keycaps. with a matching mouse.

baldgye · « **Reply #8942 on:** Wed, 03 June 2015, 13:12:27 »

I just got my Bro Set rocking on my work board. Also good to know that the Reaper I got that I thought had an off center stem dosn't actually seem too and it seems to only be a bit thicker than the other Reapers, which on my modded Filco TKL causes it to get stuck, but on a stock full size filco it fits like a glove!!

But it cant stay on that board as its for work!

Also, note the upside down H :/

CPTBadAss · « **Reply #8943 on:** Wed, 03 June 2015, 22:11:36 »

Xpost

meow a cat · « **Reply #8944 on:** Thu, 04 June 2015, 00:14:29 »

Quote from: CPTBadAss on Wed, 03 June 2015, 22:11:36

Show Image

Xpost :D

Looks great CPT! :thumb:

One thing I was curious about with these Wildcats caps, are they pad printed?

I've never heard of Unicomp doubleshots, so I'm assuming they are.

snoopy · « **Reply #8945 on:** Thu, 04 June 2015, 11:57:19 »

Quote from: meow a cat on Thu, 04 June 2015, 00:14:29

Quote from: CPTBadAss on Wed, 03 June 2015, 22:11:36
Show Image

Xpost :D

Looks great CPT! :thumb:

One thing I was curious about with these Wildcats caps, are they pad printed?

I've never heard of Unicomp doubleshots, so I'm assuming they are.

You're right.

CPTBadAss · « **Reply #8946 on:** Thu, 04 June 2015, 12:06:19 »

I think they're dye subbed. But if they are pad printed, it's a nice pad printing. There's no raised surface. They're not doubleshots. I don't think any IBM or Unicomp caps were doubleshots.

snoopy · « **Reply #8947 on:** Thu, 04 June 2015, 12:57:10 »

The modifiers must be pad printed, the others should be normal dyesub

CPTBadAss · « **Reply #8948 on:** Thu, 04 June 2015, 12:59:08 »

What makes you say that snoopy?

Halverson · « **Reply #8949 on:** Thu, 04 June 2015, 13:33:02 »

Quote from: CPTBadAss on Thu, 04 June 2015, 12:59:08

What makes you say that snoopy?

Don't think you can dyesub white on blue?

News:

Author Topic: What did you add to your Keyboard today? - Post Your Pics (Read 4577538 times)