Author Topic: [GB] M65-A | Made with RAMA.WORKS (Complete)  (Read 867546 times)

0 Members and 1 Guest are viewing this topic.

Offline therealmckellar

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2500 on: Fri, 13 October 2017, 16:20:15 »
Recent posts have me panicked too, but look at how big and how many of these things there are. It would have taken a few guys and/or a big-ass truck to run off with so many boxes. That is assuming a thief would even identify these as something of value.

It is a good day.

Show Image



Day 2 is over, and today I got through a lot more than expected.

There are boards that have this small anodization issues, but our amazing manufacturer is going to fix them. The anodization issue is only apparent when you shine light on it a certain direction. But it bugs the hell out of me.

Show Image



I should be done with most of the gb this Friday, and then I will be forwarding the units to them, and they will be fixed in a week or two.

Extra units are being used to make sure everyone gets their unit within the GB. After that, the units that come back will be used for extras, and we'll have our r2 colors as well.

Show Image


They could've pulled a truck right up to that location there and loaded the pallet on and been gone in under a minute.

Sent from my Pixel using Tapatalk


Offline jjwax

  • Posts: 124
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2501 on: Fri, 13 October 2017, 16:29:25 »
This is ridiculous.

Speculating solves nothing.

Jchan, I hope you and your family are alright.

I agree, and sincerely hope that he and his family are ok - just having some fun

Offline sixdeuces

  • Posts: 44
  • DIYKeyboards.com
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2502 on: Fri, 13 October 2017, 16:30:28 »
Yeah, there's no justification to think that's what's happened, and it's probably best if we just drop it. No need for misinformation to spread.
There's enough to deal with already without needing a heist sub-plot.

Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2503 on: Fri, 13 October 2017, 16:36:09 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline Corgi Butts

  • Posts: 332
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2504 on: Fri, 13 October 2017, 16:37:34 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.

Dude, if you popped in and posted something like this every few days, with a few bits of details, I think most everyone would be satisfied.


Sent from my iPhone using Tapatalk

Offline jjwax

  • Posts: 124
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2505 on: Fri, 13 October 2017, 16:39:11 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.

I truly appreciate the brief update!  Hopefully this will put a lot of people at ease!

Offline Dominathan

  • Posts: 87
  • Location: San Francisco
  • Too many keyboards? Not enough hands.
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2506 on: Fri, 13 October 2017, 16:40:13 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.

Is all the QCing done?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2507 on: Fri, 13 October 2017, 16:40:52 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.

Thanks, Jchan.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2508 on: Fri, 13 October 2017, 16:44:04 »
Once again no info on whats really going on.  Just another I will ship some next week....

Sent from ur mam


Offline clickstops

  • Posts: 51
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2509 on: Fri, 13 October 2017, 16:54:54 »
Here's my HIGHLY speculative theory of a "worst-case scenario."  I CANNOT STRESS ENOUGH THAT THIS IS SPECULATION - it is not intended to cast anyone in a negative light (except maybe one unknown individual, which I'll explain), nor is it intended to cause chaos in this thread, speculation ONLY, based on a largely unverifiable source I was able to dig up online.
.
.
.
SERIOUSLY - take this with a grain of salt (in fact, take all the salt from delayed GB's and take all of it)

This is quite a ridiculous post.

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2510 on: Fri, 13 October 2017, 17:06:01 »
Once again no info on whats really going on.  Just another I will ship some next week....

Sent from ur mam

 Was really hoping for some Ocean's Eleven style heist story.

Offline therealmckellar

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2511 on: Fri, 13 October 2017, 17:43:22 »
Yeah, there's no justification to think that's what's happened, and it's probably best if we just drop it. No need for misinformation to spread.
There's enough to deal with already without needing a heist sub-plot.
Yes, because your tactics have yielded such tremendous results. No way could anything like that have happened! Like it doesn't happen every day in the real world.

Sent from my Pixel using Tapatalk


Offline therealmckellar

  • Posts: 29
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2512 on: Fri, 13 October 2017, 17:44:31 »
Once again no info on whats really going on.  Just another I will ship some next week....

Sent from ur mam
What I don't get is why they can't just be shipped en masse and the extras listed on the site and sold so this can all be done with. There seems to be no rhyme or reason to anything here.

Sent from my Pixel using Tapatalk

edit: I pmed you a while back, btw

Offline FioraCorp

  • Posts: 122
  • AKA ABC
    • My insta
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2513 on: Fri, 13 October 2017, 17:49:50 »
Hi everyone,

I got some message about a robbery happening?

Fortunately, nothing of that sort has happened.

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.
...right

Offline sixdeuces

  • Posts: 44
  • DIYKeyboards.com
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2514 on: Fri, 13 October 2017, 18:19:47 »
Yeah, there's no justification to think that's what's happened, and it's probably best if we just drop it. No need for misinformation to spread.
There's enough to deal with already without needing a heist sub-plot.
Yes, because your tactics have yielded such tremendous results. No way could anything like that have happened! Like it doesn't happen every day in the real world.

Sent from my Pixel using Tapatalk

No need to get your knickers in a twist. People are welcome to write as much fan fiction as they want. Maybe ninjas next time?

Offline robbles

  • Posts: 216
  • Location: Seattle, WA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2515 on: Fri, 13 October 2017, 18:34:38 »
...

Ill be shipping as many units as I can in the following week.

If you requested a refund, I'll be processing them tonight.

Sorry for everything.

It would be nice to hear a status update from those who have posted that they are waiting for a refund. Maybe let us know in the next couple of days if your refund went through instead of disappearing.
How does one become so interested in a thing like keyboards? When you realize you use a keyboard more than any other tool in your life.

Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2516 on: Sat, 14 October 2017, 23:11:05 »
Did anyone that requested a refund get it yesterday or today?

Offline gt1989

  • Posts: 189
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2517 on: Sat, 14 October 2017, 23:16:16 »
I had sent an email requesting a refund on the 3rd and I was refunded on the 6th.

Sent from my Pixel XL using Tapatalk


Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2518 on: Sat, 14 October 2017, 23:57:35 »
I want to see more pics from the people who got theirs
« Last Edit: Sun, 15 October 2017, 02:33:34 by dead_pixel_design »

Offline Unforgivable

  • Posts: 638
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2519 on: Sun, 15 October 2017, 02:16:38 »
Did anyone that requested a refund get it yesterday or today?

No refund yet for the MC Rebirth group buy.

Hoping maybe he’ll get to it today..

Offline MikeTheTiger

  • Posts: 824
  • Location: 29.9511° N, 90.0715° W
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2520 on: Sun, 15 October 2017, 02:36:27 »
I want to see more pics from the people who got theirs

Lol. I was thinking the same thing.

Offline imorhi

  • Posts: 15
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2521 on: Sun, 15 October 2017, 16:41:09 »
Excuse my deskspace, I'll clean one day.

SA Hyperfuse





Great so far...I don't know if it was me or shipping but I'm missing a resistor for the home key and the pipe/backslash doesn't seem to be working either.
Anyone know where I could get a new resistor? Or what I can do to diagnose the other key?
« Last Edit: Sun, 15 October 2017, 16:43:05 by imorhi »

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2522 on: Sun, 15 October 2017, 17:01:57 »
Excuse my deskspace, I'll clean one day.

SA Hyperfuse

Show Image

Show Image

Show Image


Great so far...I don't know if it was me or shipping but I'm missing a resistor for the home key and the pipe/backslash doesn't seem to be working either.
Anyone know where I could get a new resistor? Or what I can do to diagnose the other key?

Do you mean diode?  it is my understanding that the resistor is there so the leds don’t get the full 5v from the usb power (which pops them quickly)

https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1613

Those are probably the right diodes but you should double check the numbers printed on yours.

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2523 on: Sun, 15 October 2017, 17:17:23 »
Excuse my deskspace, I'll clean one day.

SA Hyperfuse

Show Image

Show Image

Show Image


Great so far...I don't know if it was me or shipping but I'm missing a resistor for the home key and the pipe/backslash doesn't seem to be working either.
Anyone know where I could get a new resistor? Or what I can do to diagnose the other key?

A picture of the suspected failed component would help/ Failing that, just take a high res shot of the back of the PCB, no one can help you troubleshoot without knowing what the failed component look like.

For what it's worth, resistors are there to facilitate the functioning of LEDs (limiting current). If the actual switch is not registering, it's probably a defective PCB (broken traces) or defective diode.

If it's the diode, you can get a replacement 1N4148W (SOD123 packaging) from your favourite electronic retailer.
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline BAS1C

  • Posts: 443
  • Location: Calgary, AB
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2524 on: Tue, 17 October 2017, 00:25:37 »
I heard some of you looking for pics! I got mine a while ago... Hope the rest of you can get your hands on them soon! Rather unfortunate circumstances, but the wait will be worth it in the end!






Offline ihalatch

  • Posts: 762
  • Location: Adelaide, Australia
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2525 on: Tue, 17 October 2017, 00:34:16 »
I heard some of you looking for pics! I got mine a while ago... Hope the rest of you can get your hands on them soon! Rather unfortunate circumstances, but the wait will be worth it in the end!

Show Image


Show Image


Show Image


Cool. Where did you get the mouse pad?

Offline BAS1C

  • Posts: 443
  • Location: Calgary, AB
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2526 on: Tue, 17 October 2017, 00:40:13 »
I heard some of you looking for pics! I got mine a while ago... Hope the rest of you can get your hands on them soon! Rather unfortunate circumstances, but the wait will be worth it in the end!

Show Image


Show Image


Show Image


Cool. Where did you get the mouse pad?

Also keyclack!

Offline SakeJams

  • Posts: 105
  • Location: OK
  • HAPPINESS ONLY REAL WHEN SHARED
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2527 on: Tue, 17 October 2017, 02:41:57 »
I know this isn't m65 related but I haven't really heard much on the ZKW-II gb yet? other than when I messaged him on Reddit about 2 weeks ago and was told "they're about to ship." I guess I'm not too worried about it since I only paid for one (which was like $25) but I wouldn't mind getting it haha. Anyone else have any info?

Offline KINGPIN

  • Posts: 59
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2528 on: Tue, 17 October 2017, 08:04:44 »
After all this time still haven't shipped all board yet. Who the **** don't get bumps in life? If I am in the same situation as he is, or hell, even all of my family, friends and my leg amputated, I will buckle the **** up and ship every single thing that I owned someone no matter how much it cost, I will even consider using the fund from my life insurance of all of my dead family members just to achieve it.
To those who get your board half years ago and saying" be well soon Jchan" **** you. And **** whatever you stand for.
Oh, and to those ****tard who say "you didn't invest anything but money, don't ***** about it" well, money don't ****ing work that way, the value of money is equal to the "work" people "invested" to get the money, and money tends to increase value (positively or negatively). You take the money to a casino and at least you have a possibility of increasing it's value. This project is now becomes one of those dead loan, the value of your invoice keep decreasing since the
uncertainty of the board being delivered is getting higher over time, and we have all the right to chace around the board, not get our cash back, we(I) am not that kind of a person to throw money into project with 0 or negative gain.

Mod Edit: User has been warned for this post
« Last Edit: Wed, 18 October 2017, 19:21:24 by HoffmanMyster »
Levia Makes

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2529 on: Tue, 17 October 2017, 09:16:44 »
Dude's pissed.
keyboards.

Offline jjwax

  • Posts: 124
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2530 on: Tue, 17 October 2017, 09:23:45 »
I will even consider using the fund from my life insurance of all of my dead family members just to achieve it

 :confused: :eek: :-X

Dude

Offline Valaris

  • Posts: 156
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2531 on: Tue, 17 October 2017, 09:31:23 »
I don't know why but that dude's angry post made me laugh. It brought a bit of levity needed in this thread.

Offline kitchenace13

  • Posts: 49
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2532 on: Tue, 17 October 2017, 09:33:21 »
Yeah, at some point you just gotta laugh at some people. needs to be on r/iamverysmart
« Last Edit: Tue, 17 October 2017, 09:38:03 by kitchenace13 »

Offline clappingcactus

  • Posts: 371
  • Location: Ottawa, Canada
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2533 on: Tue, 17 October 2017, 09:41:45 »
Heck, if it can't be managed otherwise, I think people should just start killing their family members off to use life policy payouts to ship their products.

Offline Marutks

  • Posts: 310
  • Location: London
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2534 on: Tue, 17 October 2017, 09:57:56 »
I will even consider using the fund from my life insurance of all of my dead family members just to achieve it.

 :thumb:

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2535 on: Tue, 17 October 2017, 11:01:02 »
Any progress being made on these?

Sent from ur mam


Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2536 on: Tue, 17 October 2017, 11:03:31 »
Any progress being made on these?

Sent from ur mam

I think we have to chop off our leg or kill a family member to get them, right? 

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2537 on: Tue, 17 October 2017, 11:04:15 »
Any progress being made on these?

Sent from ur mam

I think we have to chop off our leg or kill a family member to get them, right?
Only if they have life insurance it seems.....

Sent from ur mam


Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2538 on: Tue, 17 October 2017, 11:17:24 »
Any progress being made on these?

Sent from ur mam

I think we have to chop off our leg or kill a family member to get them, right?
Only if they have life insurance it seems.....

Sent from ur mam

Oh ****, I just axed 2 of my family members and they don't have life insurance!  Welp, guess I'll have to wait patiently.

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2539 on: Tue, 17 October 2017, 11:23:06 »
After all this time still haven't shipped all board yet. Who the **** don't get bumps in life? If I am in the same situation as he is, or hell, even all of my family, friends and my leg amputated, I will buckle the **** up and ship every single thing that I owned someone no matter how much it cost, I will even consider using the fund from my life insurance of all of my dead family members just to achieve it.
To those who get your board half years ago and saying" be well soon Jchan" **** you. And **** whatever you stand for.
Oh, and to those ****tard who say "you didn't invest anything but money, don't ***** about it" well, money don't ****ing work that way, the value of money is equal to the "work" people "invested" to get the money, and money tends to increase value (positively or negatively). You take the money to a casino and at least you have a possibility of increasing it's value. This project is now becomes one of those dead loan, the value of your invoice keep decreasing since the
uncertainty of the board being delivered is getting higher over time, and we have all the right to chace around the board, not get our cash back, we(I) am not that kind of a person to throw money into project with 0 or negative gain.
Jokes aside i understand your frustration.  All we can do at the moment however is wait for a relevant update. 

Sent from ur mam


Offline kitchenace13

  • Posts: 49
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2540 on: Tue, 17 October 2017, 12:21:11 »
Frustration is one thing.  Violating GH TOS for personal attacks and language is another.  Not understanding the risks for delay and failure associated with a speculative group buy for a product that has never been produced before is yet another.  Admittedly being in the GB for their own profit with little or no consideration for how GBs are only possible through the continued contributions of individuals of this community is icing on the cake. 

Combine it all together and you get a statement so ugly and ridiculous that its easier to see it as satire than to believe it comes from a human being sitting behind a keyboard who really believes what they type. 

Offline Brammm87

  • Posts: 561
  • Location: Belgium
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2541 on: Tue, 17 October 2017, 13:21:41 »
Frustration is one thing.  Violating GH TOS for personal attacks and language is another.  Not understanding the risks for delay and failure associated with a speculative group buy for a product that has never been produced before is yet another.  Admittedly being in the GB for their own profit with little or no consideration for how GBs are only possible through the continued contributions of individuals of this community is icing on the cake. 

Combine it all together and you get a statement so ugly and ridiculous that its easier to see it as satire than to believe it comes from a human being sitting behind a keyboard who really believes what they type.
If this was reddit, I'd upvote you so hard.
pls gief bbv2

Offline dohmain

  • Posts: 51
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2542 on: Tue, 17 October 2017, 14:12:06 »
If this was reddit, I'd upvote you so hard.

your avatar...............

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2543 on: Tue, 17 October 2017, 14:31:50 »
After all this time still haven't shipped all board yet. Who the **** don't get bumps in life? If I am in the same situation as he is, or hell, even all of my family, friends and my leg amputated, I will buckle the **** up and ship every single thing that I owned someone no matter how much it cost, I will even consider using the fund from my life insurance of all of my dead family members just to achieve it.
To those who get your board half years ago and saying" be well soon Jchan" **** you. And **** whatever you stand for.
Oh, and to those ****tard who say "you didn't invest anything but money, don't ***** about it" well, money don't ****ing work that way, the value of money is equal to the "work" people "invested" to get the money, and money tends to increase value (positively or negatively). You take the money to a casino and at least you have a possibility of increasing it's value. This project is now becomes one of those dead loan, the value of your invoice keep decreasing since the
uncertainty of the board being delivered is getting higher over time, and we have all the right to chace around the board, not get our cash back, we(I) am not that kind of a person to throw money into project with 0 or negative gain.

Keyboards are purchases, not investments. You may feel entitled to turn a profit, and that is your prerogative, but that DOES NOT mean you are entitled to one.

If you can’t deal with waiting, ask for a refund and invest your money somewhere else. No one is forcing you to wait. jchan will refund you as previously mentioned.


People need to chill. This could be so much worse. You need to realize this is NOT the same as a scam or a similar situation where someone is holding your money hostage. You have been given the option for a refund and best I can tell anyone who has asked has received one.


The real issue is people are flipping m65 for like $600-700 and you want in on that action. That does not suddenly change your circumstances.


The entire concept that waiting somehow decreases the value because “it might not be delivered” is redicuous and baseless. If you are legtimately worried you won’t get your board ask for a refund. If your only concern is losing out on profit when you flip it, well, tbh, **** you and everything you stand for. You think anyone gives 2 ****s that your scalping is going poorly? We are here cause we want the board, not a profit opportunity.
« Last Edit: Tue, 17 October 2017, 15:26:34 by Amnesia »

Offline yokken

  • Posts: 70
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2544 on: Tue, 17 October 2017, 15:12:39 »
Wow... still lots of drama. Kingpin didn't say he/she was trying to flip an M65-A for profit nor do I think it was intended that way. It is easy to see how people are getting frustrated because jchan has dropped the ball on this. Life happens but we must press on. Find some other people to come to the office and ship them out, it really is not a hard problem to solve. If nothing else, jchan just needs to ask for help instead of holding it all up himself. It just isn't sustainable. I am personally itching to build my board and I would really like to see a return on my investment (aka get my board) but I am not attacking anyone about it, and no one else should be either. Take some time away from the keyboard community, take up another hobby for a few weeks or another month or two, do something more productive with your time. I have no doubt we will all either get our product or our money back, but it sucks to be in the dark.

Offline kitchenace13

  • Posts: 49
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2545 on: Tue, 17 October 2017, 15:31:31 »
Kingpin didn't say he/she was trying to flip an M65-A for profit nor do I think it was intended that way.

He spent half his post talking investments including, what I'm assuming is, an effort to refer to the time-value of money.  Literally his last sentence included "we(I) am not that kind of a person to throw money into project with 0 or negative gain". 

Offline Dominathan

  • Posts: 87
  • Location: San Francisco
  • Too many keyboards? Not enough hands.
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2546 on: Tue, 17 October 2017, 15:43:51 »
Kingpin didn't say he/she was trying to flip an M65-A for profit nor do I think it was intended that way.

He spent half his post talking investments including, what I'm assuming is, an effort to refer to the time-value of money.  Literally his last sentence included "we(I) am not that kind of a person to throw money into project with 0 or negative gain".

I saw that being the investment of time working to make that money, then spending that money to eventually get something down the road.  It's an investment until we can realize the gains (receiving the keyboard). 

If we were given a more concrete time frame, I feel like a lot of us could easily forget about it and do other stuff.  But right now, we're kinda being strung along weekly. We're having to invest our thoughts in this, even if we don't want to.  Especially when every new keycap set is shown on this thing.  It's like the hobby as a whole keeps teasing us with this thing that's ready to go, but stuck at the last step.


Offline jchan94

  • Keyclack Inc
  • * Moderator
  • Thread Starter
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2547 on: Tue, 17 October 2017, 16:04:40 »
Hi everyone,

Shipping will commence now. We'll have about 12 units packaged by the end of the day.

They will be rolling out 2 days out of the week.

Sorry for the mishaps - if you contacted us for a refund, it will be processed today.

---

Also, business aside - I think it's important to note that everyone takes things differently. To me - family is everything. I only have 4 family members - my brother, my sister's (2), and my mom. We have cousins/aunts/uncles, but none of which have been around in my life, if at all. This is in fact the first time I've had any instance of "death" come near me to those which I love.

Tldr: I'm sorry that my personal life has affected business as usual.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2548 on: Tue, 17 October 2017, 16:09:31 »
Great to see some progress.

Thank you for the postscript window into your life.

I hope you're doing alright.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] M65-A | Made with RAMA.WORKS
« Reply #2549 on: Tue, 17 October 2017, 16:15:29 »
Jchan, family should always come first. I was very touched by your speech here in Seattle when you said your mom was very proud of you. I can see how important family is to you, no need to apologize for it.

In other news, I'd still love to have a chance at an M65-A. LOL.