Author Topic: [GB] New Cherry PCB Mount stabilizer (Screw mounted) (Read 72689 times)

sennin32 · « **on:** Wed, 26 December 2018, 21:46:04 »

[Update Mar 31 '19]
We are sorry about following info:
We keep asking for update every week, but 1 month pass.
We still have no accurate deliver time.
Will send mails about cancellation tomorrow.

You can also tell us what's your order number if you want to cancel it via PM or sy_yang@doyustudio.com
For people who want to wait for it.
We'll keep asking for update of delivery, but I can't promise the time line now.
Once we got delivery time, we'll update ASAP.
[end of update Mar 31 '19]

Hi,
Guys!
Cherry changed their stabilizer design.
Here's the change(didnt get sample yet, pic below come from representative of Cherry) :
https://imgur.com/a/6WQVsZ2

Major change is they're going to use screw mount now.
They don't use thread insert.
It has to mount by self tapping screws.

The package will include:
60/TKL pack :
1. stabilizer stem *12
2. stabilizer house *12
3. 2u wire *6
4. 3u wire *2
5. 6.25u wire *1
6. 7u wire *1
7. screw *12
8. washer *12

full pack:
1. stabilizer stem *18
2. stabilizer house *18
3. 2u wire *9
4. 3u wire *2
5. 6.25u wire *1
6. 7u wire *1
7. screw *18
8. washer *18

Leading time is 8 weeks after GB ends.
GB time will be 2018/12/27~2019/1/12

Price :4.5/6.5
Shipping fee : auto calculate, start from $4.5 with registered mail

Group Buy link(Work after 2018/12/27 12:00) :
shopkey.doyustudio.com/001kbasnp

Happy New Year!

Signature · « **Reply #1 on:** Thu, 27 December 2018, 05:51:19 »

Approved! GL with the GB and happy holidays

Lisinge · « **Reply #2 on:** Thu, 27 December 2018, 05:55:10 »

I don't get it. How does these differ from the screw-in stabs that cherry/gmk has been making for a while now?

ChrisSwires · « **Reply #3 on:** Thu, 27 December 2018, 05:57:49 »

As above and as I asked on Reddit, how are these different from gmk stabilisers bar the branding.

If it's a GB for gmk stabilisers at a lower price (and your price is lower than I've seen before), then that's absolutely fine, it's just potentially a bit misleading. This does not appear to be anything new.

Sent from my Pixel 3 using Tapatalk

stoic-lemon · « **Reply #4 on:** Thu, 27 December 2018, 06:03:49 »

I'm glad I'm not the only one who is confused. I wonder if their choice of self-tapping screws was down to performance or cost to manufacture.

ChrisSwires · « **Reply #5 on:** Thu, 27 December 2018, 06:14:06 »

On the 'self tapping screws' comment, gmk stabilisers also have this, in as much as the screw hole isn't threaded, unlike zeal/epbt. I presume that's what that comment alludes to.

Cherry, gmk and zeal attached (in that order).

Sent from my Pixel 3 using Tapatalk

Lisinge · « **Reply #6 on:** Thu, 27 December 2018, 06:17:17 »

I've always heard that "GMK screw-in stabilizers" are still manufactured by cherry, just sold through GMK.

ChrisSwires · « **Reply #7 on:** Thu, 27 December 2018, 06:18:55 »

Quote from: Lisinge on Thu, 27 December 2018, 06:17:17

I've always heard that "GMK screw-in stabilizers" are still manufactured by cherry, just sold through GMK.

That's also what I've heard, gmk are simply the brand, they're cherry stabilisers. Bar the screw portion they're identical to cherry.

Sent from my Pixel 3 using Tapatalk

rondg · « **Reply #8 on:** Thu, 27 December 2018, 06:25:14 »

These are cheaper though

ChrisSwires · « **Reply #9 on:** Thu, 27 December 2018, 06:31:00 »

Quote from: rondg on Thu, 27 December 2018, 06:25:14

These are cheaper though

As I said earlier, down for cheap gmk stabs for sure, I'd just like clarification if they're actually new, because that's a very big deal if they are given cherry hasn't changed its stab lineup for like. I have no idea how long.

Sent from my Pixel 3 using Tapatalk

OmegaSupreme · « **Reply #10 on:** Thu, 27 December 2018, 08:42:49 »

Just an FYI, GMK stabilizers are manufactured by Cherry.

futurecrime · « **Reply #11 on:** Thu, 27 December 2018, 09:31:37 »

Joining the 'awaiting clarification' party.

kustom3 · « **Reply #12 on:** Thu, 27 December 2018, 11:35:56 »

Quote from: ChrisSwires on Thu, 27 December 2018, 06:14:06

On the 'self tapping screws' comment, gmk stabilisers also have this, in as much as the screw hole isn't threaded, unlike zeal/epbt. I presume that's what that comment alludes to.

Cherry, gmk and zeal attached (in that order).

Sent from my Pixel 3 using Tapatalk

FWIW my GMK stabs that came in a GMK bag with my M65-A are like the Cherry ones on your picture (one screw hole + 1 "mount" hole).

Captainbuttmonkey · « **Reply #13 on:** Thu, 27 December 2018, 12:01:13 »

I've always thought cherry and gmk stabs are the same thing and people just use the names interchangeably? You can get them in screw in and standard mount?

DasGnome · « **Reply #14 on:** Thu, 27 December 2018, 12:22:36 »

Yeah, these aren't new. GMK stabilizers are Cherry stabilizers. I think you've been out of the loop for the last year or so, Sennin...

That said, the price is really good; I'm guessing it's because we are cutting out GMK as the middleman.

LightningXI · « **Reply #15 on:** Thu, 27 December 2018, 20:58:28 »

Cheaper is good -- in fact, I know that the pricing in bulk is just about as cheap as this, so I think these are legit and pretty much the same Cherry/GMK screw-in stabilizers we are used to seeing.

sennin32 · « **Reply #16 on:** Wed, 02 January 2019, 08:39:05 »

I'll check the sample when possible.
Cause GMK stabs should threaded?
But the info that representative show me is not threaded, have to use self tapped screws.
And info I got is part number 6091539 change mold.
Maybe they just replace the part with what GMK is using cause the screw thing is the only difference I can tell.

I'm not sure the quotation of GMK.
What I heard is pretty expensive. (Higher than the price here for several hundreds set of 60%)
But I'm not the one who contact them, so not sure about that.

happy new year every body!

sJ1N · « **Reply #17 on:** Wed, 02 January 2019, 09:38:12 »

new or not i joined for the price

otanishock · « **Reply #18 on:** Wed, 02 January 2019, 10:42:59 »

From what I know, GMK and Cherry stabs are the same.

The difference is that the "new" Cherry stabs offered in this GB will have a new wire diameter of 1.52 instead of 1.54. I'm guessing this will be the new standard for both GMK and Cherry stabs offered in the future from now on.

MTXjunkie · « **Reply #19 on:** Wed, 02 January 2019, 10:44:53 »

Quote from: otanishock on Wed, 02 January 2019, 10:42:59

From what I know, GMK and Cherry stabs are the same.

The difference is that the "new" Cherry stabs offered in this GB will have a new wire diameter of 1.52 instead of 1.54. I'm guessing this will be the new standard for both GMK and Cherry stabs offered in the future from now on.

Do we know how the smaller dimension is a pro/con? Sorry if that’s a noob question. Doesn’t seem like 2 hundredths of a difference would be a huge difference, but I’m not a material scientist or engineer.

Sent from my iPhone using Tapatalk Pro

Eszett · « **Reply #20 on:** Wed, 02 January 2019, 13:30:56 »

You can buy these screw-in stabs since years, what's all the fuzz about? Or do I miss some feature?

MTXjunkie · « **Reply #21 on:** Wed, 02 January 2019, 13:39:35 »

Quote from: Eszett on Wed, 02 January 2019, 13:30:56

You can buy these screw-in stabs since years, what's all the fuzz about? Or do I miss some feature?

We’re paying $4.50 or $6.50 (depending on 60% or 104 option) for what would usually cost at least twice that.

Sent from my iPhone using Tapatalk Pro

RETURNISO · « **Reply #22 on:** Wed, 02 January 2019, 20:32:03 »

beside the price... why is this a 2019 new model?

koduh · « **Reply #23 on:** Wed, 02 January 2019, 22:38:23 »

Would be great to have the option to throw an extra 6.25u stab in there. To make better use of the kits. But I understand that complicates kit creation.

otanishock · « **Reply #24 on:** Wed, 02 January 2019, 23:49:37 »

Quote from: RETURNISO on Wed, 02 January 2019, 20:32:03

beside the price... why is this a 2019 new model?

Supposedly new wire diameter of 1.52 instead of 1.54. Don't think it will make that much of a difference, if any. Just the crazy kickass price that draws the attention here.

sennin32 · « **Reply #25 on:** Mon, 07 January 2019, 09:07:27 »

Hi,
We get a suggestion to add washers in the pack on Reddit.
Contacted washer venders last week.
It's not expensive item, so we'll add it into the kit.

funderburker · « **Reply #26 on:** Mon, 07 January 2019, 09:39:28 »

So GB is still up for about five days right? Could cop these for the price for sure.

MTXjunkie · « **Reply #27 on:** Mon, 07 January 2019, 09:54:22 »

Quote from: sennin32 on Mon, 07 January 2019, 09:07:27

Hi,
We get a suggestion to add washers in the pack on Reddit.
Contacted washer venders last week.
It's not expensive item, so we'll add it into the kit.

Even better. I bought my own bag on Amazon a week or so ago, but you can’t ever have too many

Sent from my iPhone using Tapatalk Pro

trg1234 · « **Reply #28 on:** Mon, 07 January 2019, 16:51:53 »

Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

romevi · « **Reply #29 on:** Mon, 07 January 2019, 17:08:26 »

Quote from: trg1234 on Mon, 07 January 2019, 16:51:53

Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

Why would they build an entire storefront website just to scam?

funderburker · « **Reply #30 on:** Mon, 07 January 2019, 17:15:27 »

Quote from: romevi on Mon, 07 January 2019, 17:08:26

Quote from: trg1234 on Mon, 07 January 2019, 16:51:53
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

Why would they build an entire storefront website just to scam?

Sennins legit.

japanesehorrorwriter · « **Reply #31 on:** Tue, 08 January 2019, 03:40:41 »

+1 Sennin = legit

rockydbull · « **Reply #32 on:** Wed, 09 January 2019, 09:47:31 »

Quote from: trg1234 on Mon, 07 January 2019, 16:51:53

Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

Genuine Cherry stabs are very cheap in bulk. I bought 100 2u stabs from a USA electronic parts vendor for like 25 bucks. I have no doubt he can get them even cheaper.

sennin32 · « **Reply #33 on:** Thu, 10 January 2019, 03:38:20 »

Hi, guys:
I went to check the sample of stabilizer.
And found they reduce the distance shown below :
(this is plate stab, but I don't have pcb stab file, so I use this pic to show it)

Old cherry is around 2.67~2.69mm.
New one reduce to 2.3mm.
I can tell the difference between with eye.
And did a quick measuring, might have little measuring error.

And here's GMK vs old cherry:

Seems they have the same dimension.
I haven't measure GMK's.
Don't have one in my hand, somebody will mail me one this week, I might able to check it next week.

The change make wires more solid, older one is looser.
But representative has only few samples.
I have no chance to feel how it type.
Not able to tell if the modify makes the stab better now.

The other thing I confirm is that they indeed have no female thread.

ChrisSwires · « **Reply #34 on:** Thu, 10 January 2019, 03:40:27 »

Quote from: sennin32 on Thu, 10 January 2019, 03:38:20

Hi, guys:
I went to check the sample of stabilizer.
And found they reduce the distance shown below :
(this is plate stab, but I don't have pcb stab file, so I use this pic to show it)
Show Image

Old cherry is around 2.67~2.69mm.
New one reduce to 2.3mm.
I can tell the difference between with eye.
And did a quick measuring, might have little measuring error.

And here's GMK vs old cherry:
Show Image

Seems they have the same dimension.
I haven't measure GMK's.
Don't have one in my hand, somebody will mail me one this week, I might able to check it next week.

The change make wires more solid, older one is looser.
But representative has only few samples.
I have no chance to feel how it type.
Not able to tell if the modify makes the stab better now.

Ok, now that, is more interesting. Hmmmmm! I'll probably get in in that case, new is new, apologies if I came across skeptical above. It's because I always am haha!

Thanks for the update.

Sent from my Pixel 3 using Tapatalk

sennin32 · « **Reply #35 on:** Thu, 10 January 2019, 03:51:09 »

Quote from: rockydbull on Wed, 09 January 2019, 09:47:31

Quote from: trg1234 on Mon, 07 January 2019, 16:51:53
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

Genuine Cherry stabs are very cheap in bulk. I bought 100 2u stabs from a USA electronic parts vendor for like 25 bucks. I have no doubt he can get them even cheaper.

100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

Hyperdimension · « **Reply #36 on:** Thu, 10 January 2019, 08:31:26 »

Why can't I view my cart on the website? The CSS doesn't load. I want to know how much shipping will be

rockydbull · « **Reply #37 on:** Thu, 10 January 2019, 09:03:04 »

Quote from: sennin32 on Thu, 10 January 2019, 03:51:09

Quote from: rockydbull on Wed, 09 January 2019, 09:47:31
Quote from: trg1234 on Mon, 07 January 2019, 16:51:53
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.

Genuine Cherry stabs are very cheap in bulk. I bought 100 2u stabs from a USA electronic parts vendor for like 25 bucks. I have no doubt he can get them even cheaper.

100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

https://www.mouser.com/ProductDetail/540-G99-0742

Eszett · « **Reply #38 on:** Thu, 10 January 2019, 09:21:08 »

Right, that's approx. 15 cent a 2u stab, if 100 are ordered.

mushubanane · « **Reply #39 on:** Thu, 10 January 2019, 10:13:55 »

Joining in for three sets!

romevi · « **Reply #40 on:** Fri, 11 January 2019, 13:47:24 »

Joined for two sets!

Rumblehotep · « **Reply #41 on:** Fri, 11 January 2019, 22:18:37 »

Wew caught this just in time, in for one of each

kmfmppl · « **Reply #42 on:** Sat, 12 January 2019, 05:36:23 »

Joined for three sets

oh_chesteroni · « **Reply #43 on:** Sat, 12 January 2019, 12:26:29 »

Joined for 4 or 5. Can't remember.

dallman5 · « **Reply #44 on:** Sat, 12 January 2019, 12:28:00 »

Just bought enough to last me a lifetime

MTXjunkie · « **Reply #45 on:** Sat, 12 January 2019, 12:29:52 »

Quote from: dallman5 on Sat, 12 January 2019, 12:28:00

Just bought enough to last me a lifetime

Hahaha! You guys make me feel better for the 7 or so I ordered

. Sad part is I already have 3 boards on order so....

Sent from my iPhone using Tapatalk Pro

Ashardalon · « **Reply #46 on:** Sun, 13 January 2019, 12:37:40 »

Joined for 4! Far too good of a price to pass up, should cover all of my boards this year.

Justin_aka_OsP_SSJ4 · « **Reply #47 on:** Sun, 13 January 2019, 18:03:18 »

I stupidly forgot about this... the "ill order when I get home from work" never works. I just put an order in for 3 sets since the link still works. I hope its ok.

5inn3d- · « **Reply #48 on:** Sun, 13 January 2019, 20:58:48 »

is it possible to still order? I tried yesterday and the transaction got declined

Justin_aka_OsP_SSJ4 · « **Reply #49 on:** Sun, 13 January 2019, 23:48:57 »

Quote from: 5inn3d- on Sun, 13 January 2019, 20:58:48

is it possible to still order? I tried yesterday and the transaction got declined

Weird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?

Or maybe they havent caught my order yet and will cancel it after all.

sennin32 · « **Reply #50 on:** Mon, 14 January 2019, 12:42:01 »

Hi,
The GB has ended.
We'll place the order this week.
And the leading time is roughly 8 weeks.
Delivery time will be around early Mar.
And we'll start packing and sending kits.
Should able to finish before Apr, 2019.

dorf · « **Reply #51 on:** Mon, 14 January 2019, 12:45:50 »

Quote from: sennin32 on Mon, 14 January 2019, 12:42:01

Hi,
The GB has ended.
We'll place the order this week.
And the leading time is roughly 8 weeks.
Delivery time will be around early Mar.
And we'll start packing and sending kits.
Should able to finish before Apr, 2019.

Great news. Thanks.

sennin32 · « **Reply #52 on:** Mon, 14 January 2019, 12:48:48 »

Quote from: Justin_aka_OsP_SSJ4 on Sun, 13 January 2019, 23:48:57

Quote from: 5inn3d- on Sun, 13 January 2019, 20:58:48
is it possible to still order? I tried yesterday and the transaction got declined
Weird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?

Or maybe they havent caught my order yet and will cancel it after all.

Hi,
We forgot to refresh site index thing after disable it.
If you want to cancel it, please tell us

sennin32 · « **Reply #53 on:** Mon, 14 January 2019, 12:53:32 »

Quote from: rockydbull on Thu, 10 January 2019, 09:03:04

Quote from: sennin32 on Thu, 10 January 2019, 03:51:09
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

https://www.mouser.com/ProductDetail/540-G99-0742

the unit price.....
even cheaper than my half million NTD order...

KaosJ · « **Reply #54 on:** Mon, 14 January 2019, 15:54:56 »

pm'd ya sennin.

Trying to increase my order count.

Justin_aka_OsP_SSJ4 · « **Reply #55 on:** Mon, 14 January 2019, 15:59:14 »

Quote from: sennin32 on Mon, 14 January 2019, 12:48:48

Quote from: Justin_aka_OsP_SSJ4 on Sun, 13 January 2019, 23:48:57
Quote from: 5inn3d- on Sun, 13 January 2019, 20:58:48
is it possible to still order? I tried yesterday and the transaction got declined
Weird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?

Or maybe they havent caught my order yet and will cancel it after all.
Hi,
We forgot to refresh site index thing after disable it.
If you want to cancel it, please tell us

I would love to keep the order. No way I will be cancelling.

Did I manage to sneak in? I'll PM you.

eyedrop · « **Reply #56 on:** Mon, 14 January 2019, 16:21:45 »

I totally forgot about this.

Will you run another GB on these? Or will this new version be available at some point?

sennin32 · « **Reply #57 on:** Tue, 15 January 2019, 00:12:37 »

Quote from: eyedrop on Mon, 14 January 2019, 16:21:45

I totally forgot about this.

Will you run another GB on these? Or will this new version be available at some point?

Will available around May.

sennin32 · « **Reply #58 on:** Thu, 14 February 2019, 22:03:19 »

Hi, Guys :
For the news I got now.
Fastest deliver time for stabs is 1st or 2nd week of March.

Our old site files was moved to another folder with a temp domain since there's some problem within the db and we encounter serious performance issue when we upgrade server things.
Although it is up, but it doesn't have https cert now, browsers will popup error.
So it is not able to check the orders now.
I'll paste new link later when we're going to ship the orders, andpeople can check their order status.

YiZZo · « **Reply #59 on:** Thu, 14 February 2019, 22:09:40 »

Thx for the update!

AlcoholEnthusiast · « **Reply #60 on:** Fri, 15 February 2019, 00:17:40 »

The page is not loading for me, too late I imagine? i got a 404

sennin32 · « **Reply #61 on:** Fri, 15 February 2019, 06:30:30 »

Quote from: AlcoholEnthusiast on Fri, 15 February 2019, 00:17:40

The page is not loading for me, too late I imagine? i got a 404

Hi,
Yes, we removed origin page when upgrade server theme.

tex_live_utility · « **Reply #62 on:** Fri, 15 February 2019, 08:48:51 »

Quote from: sennin32 on Mon, 14 January 2019, 12:53:32

Quote from: rockydbull on Thu, 10 January 2019, 09:03:04
Quote from: sennin32 on Thu, 10 January 2019, 03:51:09
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

https://www.mouser.com/ProductDetail/540-G99-0742

the unit price.....
even cheaper than my half million NTD order...

Are these screw-in or clip-in?

sennin32 · « **Reply #63 on:** Thu, 21 February 2019, 12:45:25 »

Quote from: tex_live_utility on Fri, 15 February 2019, 08:48:51

Quote from: sennin32 on Mon, 14 January 2019, 12:53:32
Quote from: rockydbull on Thu, 10 January 2019, 09:03:04
Quote from: sennin32 on Thu, 10 January 2019, 03:51:09
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

https://www.mouser.com/ProductDetail/540-G99-0742

the unit price.....
even cheaper than my half million NTD order...

Are these screw-in or clip-in?

I believe the mouser link is switch, not stabs.

MTXjunkie · « **Reply #64 on:** Thu, 21 February 2019, 13:25:05 »

Quote from: sennin32 on Thu, 21 February 2019, 12:45:25

Quote from: tex_live_utility on Fri, 15 February 2019, 08:48:51
Quote from: sennin32 on Mon, 14 January 2019, 12:53:32
Quote from: rockydbull on Thu, 10 January 2019, 09:03:04
Quote from: sennin32 on Thu, 10 January 2019, 03:51:09
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.

https://www.mouser.com/ProductDetail/540-G99-0742

the unit price.....
even cheaper than my half million NTD order...

Are these screw-in or clip-in?
I believe the mouser link is switch, not stabs.

It’s PCB mount stabs. I ordered 300 thinking they were switches

‍

Sent from my iPhone using Tapatalk Pro

sennin32 · « **Reply #65 on:** Wed, 06 March 2019, 23:51:13 »

Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.

Ashardalon · « **Reply #66 on:** Thu, 07 March 2019, 00:33:44 »

Quote from: sennin32 on Wed, 06 March 2019, 23:51:13

Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.

That's a pretty major mistake that they made, that's really unfortunate.

gabetjh · « **Reply #67 on:** Thu, 07 March 2019, 00:58:26 »

Quote from: sennin32 on Wed, 06 March 2019, 23:51:13

Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.

what is the updated estimated timeframe then?

MTXjunkie · « **Reply #68 on:** Thu, 07 March 2019, 05:57:18 »

This is definitely bad news. I agree with the above comment. What has happened to our timeframe?

Sent from my iPhone using Tapatalk Pro

sennin32 · « **Reply #69 on:** Sat, 09 March 2019, 03:18:30 »

Quote from: gabetjh on Thu, 07 March 2019, 00:58:26

Quote from: sennin32 on Wed, 06 March 2019, 23:51:13
Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.

what is the updated estimated timeframe then?

Representative just tell me this info this week.
And contacting Cherry to check how to solve this issue.
Haven't get new time frame = =
This is so ****ed

romevi · « **Reply #70 on:** Mon, 11 March 2019, 09:46:38 »

Oh, jeez...

MTXjunkie · « **Reply #71 on:** Mon, 11 March 2019, 09:48:15 »

Well, they need to have some kind of info. They’ve got people’s money and they should be responsible. Not trying to be rude to the GB runner. I’m just saying the company needs to produce answers.

Sent from my iPhone using Tapatalk Pro

nasp · « **Reply #72 on:** Mon, 11 March 2019, 12:40:14 »

Well, it's a good thing I paid with PayPal, right?

KaosJ · « **Reply #73 on:** Mon, 11 March 2019, 17:43:57 »

Quote from: nasp on Mon, 11 March 2019, 12:40:14

Well, it's a good thing I paid with PayPal, right?

Calm down, Sennin is a serious duder, he will sort it out

sennin32 · « **Reply #74 on:** Mon, 11 March 2019, 23:32:56 »

Quote from: MTXjunkie on Mon, 11 March 2019, 09:48:15

Well, they need to have some kind of info. They’ve got people’s money and they should be responsible. Not trying to be rude to the GB runner. I’m just saying the company needs to produce answers.

Sent from my iPhone using Tapatalk Pro

We're confirming the leading time now

MTXjunkie · « **Reply #75 on:** Tue, 12 March 2019, 04:53:04 »

Quote from: sennin32 on Mon, 11 March 2019, 23:32:56

Quote from: MTXjunkie on Mon, 11 March 2019, 09:48:15
Well, they need to have some kind of info. They’ve got people’s money and they should be responsible. Not trying to be rude to the GB runner. I’m just saying the company needs to produce answers.

Sent from my iPhone using Tapatalk Pro

We're confirming the leading time now

Sent from my iPhone using Tapatalk Pro

Dreamre · « **Reply #76 on:** Tue, 12 March 2019, 12:28:11 »

Quote from: KaosJ on Mon, 11 March 2019, 17:43:57

Quote from: nasp on Mon, 11 March 2019, 12:40:14
Well, it's a good thing I paid with PayPal, right?

Calm down, Sennin is a serious duder, he will sort it out

Quote from: KaosJ on Mon, 11 March 2019, 17:43:57

Quote from: nasp on Mon, 11 March 2019, 12:40:14
Well, it's a good thing I paid with PayPal, right?

Calm down, Sennin is a serious duder, he will sort it out

+1 He's great and legit.

Waven · « **Reply #77 on:** Tue, 19 March 2019, 04:11:25 »

Any update?

MTXjunkie · « **Reply #78 on:** Thu, 21 March 2019, 21:30:50 »

Any news?

Sent from my iPhone using Tapatalk Pro

sennin32 · « **Reply #79 on:** Fri, 22 March 2019, 00:05:55 »

Hi,
Seems somebody misunderstanding the status 0.0
We never received wrong item, they found it immediately after import to Taiwan.
We won't send wrong product to people.

There's still no precise leading time given this week.
I guess it is because of some guy made a mistake, and they have no idea what's in the containers before they can check it in the port.
If we didn't get any update next week, we'll send a mail to buyers asking if they want to wait.
You can decide if you want a refund or wait

kustom3 · « **Reply #80 on:** Fri, 22 March 2019, 05:35:15 »

Sounds good, thanks for the update.

sennin32 · « **Reply #81 on:** Sun, 31 March 2019, 03:18:23 »

Hi,
Sorry, we keep asking for update every week, but 1 month pass.
We still not have an accurate deliver time.
Will send mails about cancellation tomorrow.

You can also tell us what's your order number if you want to cancel it via PM or sy_yang@doyustudio.com
For people who want to wait for it.
We'll keep asking for update of delivery, but I can't promise the time line now.

dorf · « **Reply #82 on:** Sun, 31 March 2019, 03:37:35 »

Appreciate the update. I'll wait, I'm curious about these new stabilizers.

Justin_aka_OsP_SSJ4 · « **Reply #83 on:** Mon, 15 April 2019, 03:08:12 »

Thanks for updating us all by email

I check this thread every couple of days so dont forget to post here too.

sennin32 · « **Reply #84 on:** Wed, 17 April 2019, 21:39:03 »

Sorry,
Forgot to update here.
We still not sure when it will arrive Taiwan now.
We've sent all buyers email about choice of waiting or cancel.
If you didn't receive mail, please pm us.
We sent lot of mails in short time, might treat as spam for some mail system

MTXjunkie · « **Reply #85 on:** Wed, 17 April 2019, 21:40:23 »

Quote from: sennin32 on Wed, 17 April 2019, 21:39:03

Sorry,
Forgot to update here.
We still not sure when it will arrive Taiwan now.
We've sent all buyers email about choice of waiting or cancel.
If you didn't receive mail, please pm us.
We sent lot of mails in short time, might treat as spam for some mail system

I responded a few days ago, but have not heard back or received a refund.

Sent from my iPhone using Tapatalk Pro

beamingrobot · « **Reply #86 on:** Fri, 26 April 2019, 18:12:14 »

I still have no reply / refund after a few emails.

Justin_aka_OsP_SSJ4 · « **Reply #87 on:** Mon, 29 April 2019, 21:10:01 »

I know we are in the modern age. But perhaps picking up the phone and calling cherry for an update rather than not getting any emails is a good idea?

Paypal window is gonna close for buyer protection.

beamingrobot · « **Reply #88 on:** Thu, 02 May 2019, 20:49:47 »

Bumping this thread, anyone received any communication from the vendor regarding this? I might resort to a PayPal dispute if this goes on

Ashardalon · « **Reply #89 on:** Thu, 02 May 2019, 21:01:52 »

I'm fine with waiting, but probably towards the end of the month in May if we don't hear anything back from the vendor I'll request a refund through PayPal.

nasp · « **Reply #90 on:** Thu, 02 May 2019, 21:04:49 »

I mentioned earlier that I was glad that I paid through PayPal and got some heat for that - saying that I needed to calm down.

Well, don't want to say it, but...

MTXjunkie · « **Reply #91 on:** Fri, 03 May 2019, 05:40:30 »

I asked for a refund via email, I did have to ask a second time here, but I got my refund within a week/week and a half of originally asking.

Sent from my iPhone using Tapatalk Pro

beamingrobot · « **Reply #92 on:** Fri, 03 May 2019, 06:16:17 »

Quote from: MTXjunkie on Fri, 03 May 2019, 05:40:30

I asked for a refund via email, I did have to ask a second time here, but I got my refund within a week/week and a half of originally asking.

Sent from my iPhone using Tapatalk Pro

Thanks, will drop them a line again then.

romevi · « **Reply #93 on:** Fri, 03 May 2019, 07:48:21 »

Quote from: nasp on Thu, 02 May 2019, 21:04:49

I mentioned earlier that I was glad that I paid through PayPal and got some heat for that - saying that I needed to calm down.

Well, don't want to say it, but...

You need to calm down.

Gondolindrim · « **Reply #94 on:** Sun, 05 May 2019, 13:05:53 »

It would be good if OP were a little bit more careful with this thread. In his position I'd make weekly posts to update us on what's going on, even if nothing happened.

I ordered for me plus 5 friends together totalling 20 stab kits and they are on my neck to ask for the refund. The Paypal window is closing

ray160 · « **Reply #95 on:** Tue, 07 May 2019, 00:37:55 »

Any updates or even non updates? Its been a few weeks since the last one.

Justin_aka_OsP_SSJ4 · « **Reply #96 on:** Tue, 21 May 2019, 09:42:43 »

*deafening silence

romevi · « **Reply #97 on:** Tue, 21 May 2019, 10:57:34 »

May ask for a refund.

Gondolindrim · « **Reply #98 on:** Tue, 21 May 2019, 11:41:49 »

Quote from: romevi on Tue, 21 May 2019, 10:57:34

May ask for a refund.

Yeah, this is getting into my nerves

YiZZo · « **Reply #99 on:** Tue, 21 May 2019, 12:37:27 »

Ditto please

nasp · « **Reply #100 on:** Tue, 21 May 2019, 13:37:19 »

Quote from: romevi on Tue, 21 May 2019, 10:57:34

May ask for a refund.

You need to calm down!

ray160 · « **Reply #101 on:** Thu, 23 May 2019, 20:13:41 »

if there's no news by end of June I'm gonna ask for refund. I'm patient but I can only wait for so long..

beamingrobot · « **Reply #102 on:** Thu, 23 May 2019, 21:22:40 »

I've gone ahead and flagged my transaction through PayPal

gabetjh · « **Reply #103 on:** Tue, 28 May 2019, 10:42:58 »

any news in regards to this?

Gondolindrim · « **Reply #104 on:** Fri, 31 May 2019, 10:53:09 »

Quote from: gabetjh on Tue, 28 May 2019, 10:42:58

any news in regards to this?

Yes. We need to calm down.

Gati · « **Reply #105 on:** Fri, 31 May 2019, 11:48:03 »

Quote from: Gondolindrim on Fri, 31 May 2019, 10:53:09

Quote from: gabetjh on Tue, 28 May 2019, 10:42:58
any news in regards to this?

Yes. We need to calm down.

So... what’s the news?

nasp · « **Reply #106 on:** Fri, 31 May 2019, 16:37:14 »

Quote from: Gati on Fri, 31 May 2019, 11:48:03

Quote from: Gondolindrim on Fri, 31 May 2019, 10:53:09
Quote from: gabetjh on Tue, 28 May 2019, 10:42:58
any news in regards to this?

Yes. We need to calm down.

So... what’s the news?

Nothing. No communication from OP in approx. a month.

beamingrobot · « **Reply #107 on:** Fri, 31 May 2019, 21:04:37 »

PayPal refunded me since there was no response from the vendor on their end. YMMV.

YiZZo · « **Reply #108 on:** Sun, 02 June 2019, 13:41:30 »

Quote from: beamingrobot on Fri, 31 May 2019, 21:04:37

PayPal refunded me since there was no response from the vendor on their end. YMMV.

Thx for the update. I've sent two emails the last weeks with no response. I guess it's time to hit up PayPal.

ray160 · « **Reply #109 on:** Fri, 07 June 2019, 17:09:43 »

Nothing new even after a post on another group buy thread. Gonna go the PayPal route now.

Justin_aka_OsP_SSJ4 · « **Reply #110 on:** Wed, 12 June 2019, 05:22:24 »

Got my PayPal refund. PP did get in contacttt with them.

nasp · « **Reply #111 on:** Wed, 12 June 2019, 11:50:01 »

After submitting my PayPal dispute, my refund was done promptly. Seller either didn't respond or didn't want to make a counter-appeal.

YiZZo · « **Reply #112 on:** Thu, 13 June 2019, 21:07:22 »

Also want to assert that I got my PayPal refund too without issue.

heathen · « **Reply #113 on:** Mon, 24 June 2019, 19:23:48 »

How's it going?

sennin32 · « **Reply #114 on:** Mon, 01 July 2019, 23:09:03 »

Hi,
Guys,
We still not get useful info from Cherry

And I just refund all the refund request.
If you prefer cancel it and asked for refund, please tell us.
Or open a case on paypal before too late (6 months), so we can check all the request easily and issue refund ASAP.
(Sorry, too many useless mails...my mail box is total mess)

If there's any update from cherry, I'll update here

The only thing I get now is that the parts# has updated, so they'll use it in the end but not sure when
This is the only info sells tell me now= =

sennin32 · « **Reply #115 on:** Mon, 01 July 2019, 23:15:30 »

Quote from: nasp on Wed, 12 June 2019, 11:50:01

After submitting my PayPal dispute, my refund was done promptly. Seller either didn't respond or didn't want to make a counter-appeal.

I rarely login and check paypal account 0.0
Sorry
But mystore system can not see cases, either my ERP system.
I checked it yesterday and found some people want to cancel their order.
And noticed that it's almost 6 months.

But due to respond from cherry, I can't promise timeline now.
If anyone want cancel your order, please tell us or open case on paypal(open case will be better cause it list all the request with a clear interface)

sennin32 · « **Reply #116 on:** Wed, 03 July 2019, 02:28:01 »

All buyers ask for cancel should have received their refund

If not, please tell us.

romevi · « **Reply #117 on:** Wed, 03 July 2019, 10:05:27 »

Quote from: sennin32 on Wed, 03 July 2019, 02:28:01

All buyers ask for cancel should have received their refund
If not, please tell us.

Thanks, sennin. My apologies for asking for a refund, but with the deadline approaching I couldn't risk it.

Good luck to all those who've joined and are sticking with it.

sennin32 · « **Reply #118 on:** Wed, 17 July 2019, 21:28:10 »

Quote from: romevi on Wed, 03 July 2019, 10:05:27

Quote from: sennin32 on Wed, 03 July 2019, 02:28:01
All buyers ask for cancel should have received their refund
If not, please tell us.

Thanks, sennin. My apologies for asking for a refund, but with the deadline approaching I couldn't risk it.

Good luck to all those who've joined and are sticking with it.

It’s okay

sennin32 · « **Reply #119 on:** Wed, 17 July 2019, 21:29:22 »

Hi,
Good news!
Sales just told me that the est deliver is around 8 week O_Q
Finally got update!

okidna · « **Reply #120 on:** Sat, 20 July 2019, 11:39:00 »

Quote from: sennin32 on Wed, 17 July 2019, 21:29:22

Hi,
Good news!
Sales just told me that the est deliver is around 8 week O_Q
Finally got update!

Thank you for the update.

sennin32 · « **Reply #121 on:** Mon, 19 August 2019, 07:55:09 »

Hi,
We're packing them now and start ship the.
FIFO.
But it has to take few days.
All buyers should be able to receive around late Sep

Dreamre · « **Reply #122 on:** Mon, 19 August 2019, 12:25:23 »

Quote from: sennin32 on Mon, 19 August 2019, 07:55:09

Hi,
We're packing them now and start ship the.
FIFO.
But it has to take few days.
All buyers should be able to receive around late Sep

I heard the new Cherry stabilizers have issues, can you confirm that your batch is not affected?

Waven · « **Reply #123 on:** Thu, 05 September 2019, 11:02:16 »

Finally! The stabs arrived today!

sJ1N · « **Reply #124 on:** Thu, 05 September 2019, 13:48:35 »

oh i forgot i joined this.. is there any way i can follow my package or know when it arrives ?

sennin32 · « **Reply #125 on:** Tue, 01 October 2019, 05:45:45 »

Hi,
Everybody!
My shipping label system got some issues.
Some of the pack has been returned.
I'm resending them last week.
But I think some of them have delivered to wrong address.
If you haven't received it.
Please send us a message with the order number or email address so we can resend it.

sennin32 · « **Reply #126 on:** Tue, 01 October 2019, 06:18:10 »

Quote from: Dreamre on Mon, 19 August 2019, 12:25:23

Quote from: sennin32 on Mon, 19 August 2019, 07:55:09
Hi,
We're packing them now and start ship the.
FIFO.
But it has to take few days.
All buyers should be able to receive around late Sep

I heard the new Cherry stabilizers have issues, can you confirm that your batch is not affected?

It can feel difference from old pcb stabs.
But I don't hear a loud sound.
Not sure if stabs we received is the same batch @@

KaosJ · « **Reply #127 on:** Sun, 06 October 2019, 09:58:51 »

Got my stabs finally, but didn't tested if there is any difference.

vegs · « **Reply #128 on:** Fri, 18 October 2019, 13:36:07 »

Just got mine, these are indeed "new batch". I used this comparison.

I have not tested mine yet though.

vtachkov · « **Reply #129 on:** Tue, 29 October 2019, 12:17:05 »

Hi Sennin, I sent you a PM about my order.

sennin32 · « **Reply #130 on:** Fri, 20 December 2019, 04:53:21 »

Hi,
Everybody.
We received 3 returns in past 30 days.
And seems there's no more returns (hope so...)
It is #3792 #3807 and #3786
We'll send your packs on Mon

If there anybody haven't received, please contact us!

sennin32 · « **Reply #131 on:** Fri, 20 December 2019, 04:56:08 »

btw,
anybody has review about new stabs?
We slightly modified some wires this year.
Hope that makes stabs from us work better

kmfmppl · « **Reply #132 on:** Fri, 20 December 2019, 08:37:36 »

Hi, I forgot that I was in this GB. I have not received my order yet (#000003770).

vtachkov · « **Reply #133 on:** Fri, 20 December 2019, 11:37:26 »

I also haven't received mine. I sent a PM a while ago with no response.

haingo1094 · « **Reply #134 on:** Fri, 20 December 2019, 16:10:27 »

I haven't received my order yet . My order ID is #000003745

sennin32 · « **Reply #135 on:** Sat, 21 December 2019, 08:17:42 »

Quote from: vtachkov on Fri, 20 December 2019, 11:37:26

I also haven't received mine. I sent a PM a while ago with no response.

I just checked message, but there's no message from you.
Could you send your order number again?

Quote from: haingo1094 on Fri, 20 December 2019, 16:10:27

I haven't received my order yet . My order ID is #000003745

Quote from: kmfmppl on Fri, 20 December 2019, 08:37:36

Hi, I forgot that I was in this GB. I have not received my order yet (#000003770).

I'll check the status of tracking for your orders on Monday

sJ1N · « **Reply #136 on:** Sat, 21 December 2019, 08:24:54 »

I also haven't received my order yet. ID #000003636

News:

Author Topic: [GB] New Cherry PCB Mount stabilizer (Screw mounted) (Read 72689 times)