« previous next »
Pages: « 1 [2] 3 »  All   Go Down

Author Topic: Post your Sprit keyboards /cases / PCBs  (Read 302147 times)

0 Members and 1 Guest are viewing this topic.

Offline spoonypirate

  • Posts: 28
Re: Post your Sprit keyboards /cases / PCBs
« Reply #50 on: Thu, 16 April 2015, 10:22:48 »
I got mine a week ago, haven't gotten around to lining up all the SIP sockets for the switch LEDs (although they're in). Nerd 60 with Clears.


Edit: Now with more pictures, since someone asked :) Oh, and I finished the LEDs!



« Last Edit: Fri, 17 April 2015, 18:44:32 by spoonypirate »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #51 on: Sun, 19 April 2015, 05:06:27 »
Recite  from  rpeterclark   :    https://geekhack.org/index.php?topic=43865.1530       and a  bulid log   :   http://imgur.com/a/2vTc1     Another  :  http://imgur.com/a/nYWbK

It's Gateron Clear Top!    The LEDs may put into the switch inside,  Not the conventional outside.   The Top can be opened without desoldering LEDs.

97765-0    97767-1    97769-2  98380-3   98384-4 98382-5 99414-6 98386-7 98388-8
« Last Edit: Mon, 04 May 2015, 02:41:14 by sprit »
Logged

Offline Signature

  • master of puppers
  • * Marketplace Moderator
  • Posts: 1914
  • Location: Sweden
  • snoozing
Re: Post your Sprit keyboards /cases / PCBs
« Reply #52 on: Sun, 19 April 2015, 05:55:03 »
Quote from: sprit on Sun, 19 April 2015, 05:06:27
A Recite  from  rpeterclark   :    https://geekhack.org/index.php?topic=43865.1530

It's Clear Top!    The LEDs may put into the switch inside,  Not the conventional outside.   The Top can be opened without desoldering LEDs.



(Attachment Link)   (Attachment Link)   (Attachment Link)
which switch type is that?
Logged
Very busy with studies atm.

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #53 on: Sun, 19 April 2015, 07:12:56 »
2x3x4mm  LEDs  Inside the Switches,  No need to desolder!

97772-097774-197776-297778-3
« Last Edit: Sun, 19 April 2015, 10:37:25 by sprit »
Logged

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: Post your Sprit keyboards /cases / PCBs
« Reply #54 on: Sun, 19 April 2015, 10:36:03 »
Quote from: Signature on Sun, 19 April 2015, 05:55:03
Quote from: sprit on Sun, 19 April 2015, 05:06:27
A Recite  from  rpeterclark   :    https://geekhack.org/index.php?topic=43865.1530

It's Clear Top!    The LEDs may put into the switch inside,  Not the conventional outside.   The Top can be opened without desoldering LEDs.



(Attachment Link)   (Attachment Link)   (Attachment Link)
which switch type is that?

It looks like Cherry MX Blues with clear Gateron switch top covers to me.


== == == == ==


Quote from: sprit on Sun, 19 April 2015, 07:12:56
LEDs  Inside the Switches


(Attachment Link) (Attachment Link) (Attachment Link)



Hmm...interesting.  I should try these out when I get some Gateron switches with the clear lower housing.
Logged

Offline Defect

  • Posts: 670
  • I collect keyboards and keyboard accessories
Re: Post your Sprit keyboards /cases / PCBs
« Reply #55 on: Tue, 28 April 2015, 06:19:09 »
Teaser

Logged

Not pictured: KeyCool 84 [MX Red] | Focus 2001 [Complicated White Alps]
Endgame Board | Defect's Watermelon Board Build Doc

Offline beehatch

  • baehatch
  • * Exquisite Elder
  • Posts: 1810
Re: Post your Sprit keyboards /cases / PCBs
« Reply #56 on: Tue, 28 April 2015, 10:51:00 »
Quote from: Defect on Tue, 28 April 2015, 06:19:09
Teaser

Show Image


I really love the sky blue plate paired with the clear switch tops. Can't wait to see the finished product  ;)
Logged

Offline xiphoid

  • Posts: 15
Re: Post your Sprit keyboards /cases / PCBs
« Reply #57 on: Wed, 29 April 2015, 03:27:19 »
98875-0wooden case
« Last Edit: Wed, 29 April 2015, 19:34:09 by xiphoid »
Logged

Offline Air tree

  • Better late than never ^-^
  • * Destiny Supporter
  • Posts: 2206
  • Location: Satellite Beach, FL
  • Formerly not demik
Re: Post your Sprit keyboards /cases / PCBs
« Reply #58 on: Wed, 29 April 2015, 03:36:29 »
Quote from: xiphoid on Wed, 29 April 2015, 03:27:19
(Attachment Link) wooden case
That's really unique looking. I like it!  :thumb:
Logged

Offline baldgye

  • Will Smith Disciple
  • Posts: 4780
  • Location: UK
Re: Post your Sprit keyboards /cases / PCBs
« Reply #59 on: Wed, 29 April 2015, 03:47:46 »
Logged
★

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #60 on: Wed, 29 April 2015, 06:14:08 »
Quote from: Defect on Tue, 28 April 2015, 06:19:09
Teaser

Show Image

Lovely MX Green Switches in a clear Top!   Mating with the case is gorgeous to me.   :o :o


PS.  btw, The MX Green color seems suspicious, compare to the Turquoise plate.  8) ::)
« Last Edit: Wed, 29 April 2015, 06:45:05 by sprit »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #61 on: Wed, 29 April 2015, 06:18:25 »
Quote from: xiphoid on Wed, 29 April 2015, 03:27:19
(Attachment Link) wooden case
WOW!  I m just dizzy, stoned.   Looks like aaA~ Reggae instrumenta~    :o :thumb:
« Last Edit: Wed, 29 April 2015, 06:22:14 by sprit »
Logged

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: Post your Sprit keyboards /cases / PCBs
« Reply #62 on: Wed, 29 April 2015, 09:54:46 »
My SPRiT 60% with 55g SPRiT gold plated springs in vintage blacks and gold plated stab wires with Charred Orange on top :) A board I love so much, I need a second SPRiT 60%  :cool:
98843-0
Logged
Semnătura lu’ pește prăjit ....

Offline henz

  • * Exquisite Elder
  • Posts: 1284
  • What?
Re: Post your Sprit keyboards /cases / PCBs
« Reply #63 on: Wed, 29 April 2015, 12:13:25 »
Quote from: DanielT on Wed, 29 April 2015, 09:54:46
My SPRiT 60% with 55g SPRiT gold plated springs in vintage blacks and gold plated stab wires with Charred Orange on top :) A board I love so much, I need a second SPRiT 60%  :cool:
(Attachment Link)

sweeet
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #64 on: Wed, 29 April 2015, 20:06:49 »
Quote from: xiphoid on Wed, 29 April 2015, 03:27:19
(Attachment Link)   wooden case
Which kinda wood here?  So authentic idea!  I want one!!!   :o
« Last Edit: Wed, 29 April 2015, 20:08:51 by sprit »
Logged

Offline aaronz8

  • Posts: 27
Re: Post your Sprit keyboards /cases / PCBs
« Reply #65 on: Thu, 14 May 2015, 14:30:10 »
Sprit asked me to upload some pictures of the parts I got from him in January 2015. Sorry for the delay... I was hoping to get the board completed before posting pictures but I didn't want to put in LEDs before my clear switch tops from Shadovved arrived.

FaceW, Cherry MX white, Vortex backlit doubleshot pbt keycaps, mostly HHKB layout but with extra mods for more fun.
Waiting on clear switch tops to put in cyan or blue leds.

100711-0100713-1
« Last Edit: Thu, 14 May 2015, 14:35:04 by aaronz8 »
Logged

Offline retrochick

  • Posts: 600
  • goodbye my wallet
Re: Post your Sprit keyboards /cases / PCBs
« Reply #66 on: Thu, 14 May 2015, 20:00:35 »
Quote from: aaronz8 on Thu, 14 May 2015, 14:30:10
Sprit asked me to upload some pictures of the parts I got from him in January 2015. Sorry for the delay... I was hoping to get the board completed before posting pictures but I didn't want to put in LEDs before my clear switch tops from Shadovved arrived.

FaceW, Cherry MX white, Vortex backlit doubleshot pbt keycaps, mostly HHKB layout but with extra mods for more fun.
Waiting on clear switch tops to put in cyan or blue leds.

(Attachment Link) (Attachment Link)

Very nice! Mine's going to be really similar. I'm still debating about the clear switch tops - I know they'll make any board look awesome, but I heard there are some clearance issues with the 2x3x4 leds so I think you need to dremel the sides a bit so they fit in the covers.  :(
Logged


Cherry is love. Topre is life. ~raymogi

Offline beehatch

  • baehatch
  • * Exquisite Elder
  • Posts: 1810
Re: Post your Sprit keyboards /cases / PCBs
« Reply #67 on: Tue, 19 May 2015, 06:02:30 »
Finished this a couple of weeks ago.



Sprit 60% with 78g Sprit Gold Springs with Gateron Blacks.

I have another Sprit 60% to assemble, just enjoying this build at the moment.
Logged

Offline Magna224

  • Posts: 394
  • Location: Tempe, Arizona
Re: Post your Sprit keyboards /cases / PCBs
« Reply #68 on: Sat, 23 May 2015, 07:40:13 »
Still waiting on my 87 case ordered in Dec 2013. Very excited to join everyone though! Cant wait for the ALPS PCB.
Logged
If you live in AZ you can try my keyboards. I usually keep plenty of different ALPS and MX and buckling springs.

Offline aaronz8

  • Posts: 27
Re: Post your Sprit keyboards /cases / PCBs
« Reply #69 on: Fri, 29 May 2015, 17:08:32 »
Quote from: retrochick on Thu, 14 May 2015, 20:00:35
Quote from: aaronz8 on Thu, 14 May 2015, 14:30:10
Sprit asked me to upload some pictures of the parts I got from him in January 2015. Sorry for the delay... I was hoping to get the board completed before posting pictures but I didn't want to put in LEDs before my clear switch tops from Shadovved arrived.

FaceW, Cherry MX white, Vortex backlit doubleshot pbt keycaps, mostly HHKB layout but with extra mods for more fun.
Waiting on clear switch tops to put in cyan or blue leds.

(Attachment Link) (Attachment Link)

Very nice! Mine's going to be really similar. I'm still debating about the clear switch tops - I know they'll make any board look awesome, but I heard there are some clearance issues with the 2x3x4 leds so I think you need to dremel the sides a bit so they fit in the covers.  :(

Thanks! I just finished assembling everything - there are absolutely no clearance issues! :)

More pictures:
« Last Edit: Fri, 29 May 2015, 17:11:53 by aaronz8 »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #70 on: Sun, 31 May 2015, 06:11:41 »
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #71 on: Sun, 31 May 2015, 06:15:31 »
Fianl Inspection & PreAssembly before Shipping

60% Model 2S  slim  -  Clear Transparent    * protection coats not removed yet

102167-0 
102169-1  102171-2  102173-3
« Last Edit: Sun, 31 May 2015, 11:33:29 by sprit »
Logged

Offline FreeChemicals

  • Posts: 139
  • Location: euw
Re: Post your Sprit keyboards /cases / PCBs
« Reply #72 on: Sun, 31 May 2015, 07:40:27 »
Quote from: sprit on Sun, 31 May 2015, 06:11:41
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)

I don't have any issues with my Desko set (Cherry profile) and 2x3x4 LEDs.

My sprit pcb  + plate. The space cutout is a bit weird, but overall I really like it. The 5mm acrylic plate feels great!



Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #73 on: Sun, 31 May 2015, 07:54:58 »
Nice!  :)
 
Space bar cut is open, due to the Plate is 5mm Thick.
- pros  :  You dont have to worry about the stab wires hang off.
 
If it were normal 1.5mm Thin plate, it would be closed.   ;) 
-  cons  : You may have a headache, when the stab wire goes off the trail.  sometimes you have to desolder the plate.

may confer  :  https://geekhack.org/index.php?topic=60887.msg1757101#msg1757101 


« Last Edit: Sun, 31 May 2015, 09:01:04 by sprit »
Logged

Offline SixtyLife

  • Posts: 474
  • Location: New Jersey
Re: Post your Sprit keyboards /cases / PCBs
« Reply #74 on: Sun, 31 May 2015, 21:35:15 »
Quote from: FreeChemicals on Sun, 31 May 2015, 07:40:27
Quote from: sprit on Sun, 31 May 2015, 06:11:41
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)

I don't have any issues with my Desko set (Cherry profile) and 2x3x4 LEDs.

My sprit pcb  + plate. The space cutout is a bit weird, but overall I really like it. The 5mm acrylic plate feels great!

Show Image


Show Image


Nice! :thumb: Here's my Desko-twin Sprit60:


sprit edition facew, 62g gold plated springs, 5mm acrylic plate

Logged
Kishsaver, JP SSK, Displaywriter SSK, 360C, HHKB Type S, X60, Jane v2, Jane v2 CE

Offline retrochick

  • Posts: 600
  • goodbye my wallet
Re: Post your Sprit keyboards /cases / PCBs
« Reply #75 on: Sun, 31 May 2015, 22:16:00 »
Quote from: aaronz8 on Fri, 29 May 2015, 17:08:32
Thanks! I just finished assembling everything - there are absolutely no clearance issues! :)

More pictures:

Nice thanks for the follow up! Are those keycaps OEM profile?

Quote from: codingcpa on Sun, 31 May 2015, 21:35:15
Quote from: FreeChemicals on Sun, 31 May 2015, 07:40:27
Quote from: sprit on Sun, 31 May 2015, 06:11:41
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)

I don't have any issues with my Desko set (Cherry profile) and 2x3x4 LEDs.

My sprit pcb  + plate. The space cutout is a bit weird, but overall I really like it. The 5mm acrylic plate feels great!

Show Image


Show Image


Nice! :thumb: Here's my Desko-twin Sprit60:
Show Image


sprit edition facew, 62g gold plated springs, 5mm acrylic plate
Show Image



Those are just regular switches tops correct?

Quote from: FreeChemicals on Sun, 31 May 2015, 07:40:27
Quote from: sprit on Sun, 31 May 2015, 06:11:41
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)

I don't have any issues with my Desko set (Cherry profile) and 2x3x4 LEDs.

My sprit pcb  + plate. The space cutout is a bit weird, but overall I really like it. The 5mm acrylic plate feels great!

Show Image


Show Image


Yep, I think the clearance issue is only with the clear switch tops from Gateron (or another brand that I can't think of right now) and the 2x3x4 leds. Check out LastPilot's LZ-S build log here https://geekhack.org/index.php?topic=69764.0. He illustrates the issue in detail.

Logged


Cherry is love. Topre is life. ~raymogi

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #76 on: Mon, 01 June 2015, 00:16:22 »
Quote from: codingcpa on Sun, 31 May 2015, 21:35:15
Nice! :thumb: Here's my Desko-twin Sprit60:

Show Image


sprit edition facew, 62g gold plated springs, 5mm acrylic plate
 
Show Image

Nice Caps !   ;)
 
I may see You left the protection coats on the plate,
It's good idea Not to get dirty   :thumb:
« Last Edit: Mon, 01 June 2015, 00:18:01 by sprit »
Logged

Offline SixtyLife

  • Posts: 474
  • Location: New Jersey
Re: Post your Sprit keyboards /cases / PCBs
« Reply #77 on: Mon, 01 June 2015, 00:46:06 »
Quote from: sprit on Mon, 01 June 2015, 00:16:22
Quote from: codingcpa on Sun, 31 May 2015, 21:35:15
Nice! :thumb: Here's my Desko-twin Sprit60:

Show Image


sprit edition facew, 62g gold plated springs, 5mm acrylic plate
 
Show Image

Nice Caps !   ;)
 
I may see You left the protection coats on the plate,
It's good idea Not to get dirty   :thumb:

ohhh my lol. that was not intentional. and now... I will have to desolder and resolder the whole board to get that bottom layer off  :confused:

but thanks for the heads up Sprit :thumb:
Logged
Kishsaver, JP SSK, Displaywriter SSK, 360C, HHKB Type S, X60, Jane v2, Jane v2 CE

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #78 on: Mon, 01 June 2015, 01:50:35 »
Or, Just do it Next time when You have to desolder  :)

No LEDs yet?   (Then SWs desoldering seems Not that hard Job, but ..)

Let's just imagine, its a Clear frosted plate    ::)
« Last Edit: Mon, 01 June 2015, 01:58:00 by sprit »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #79 on: Mon, 01 June 2015, 02:17:54 »
There is a piano school neighbour office building,
children come to play Mozart, Chopin around this time.   




Logged

Offline aaronz8

  • Posts: 27
Re: Post your Sprit keyboards /cases / PCBs
« Reply #80 on: Mon, 01 June 2015, 14:25:48 »
Quote from: retrochick on Sun, 31 May 2015, 22:16:00
Quote from: aaronz8 on Fri, 29 May 2015, 17:08:32
Thanks! I just finished assembling everything - there are absolutely no clearance issues! :)

More pictures:

Nice thanks for the follow up! Are those keycaps OEM profile?

I'm not sure. They're from https://www.massdrop.com/buy/vortex-backlit-doubleshot-pbt-keycaps?guest_open=true

Quote from: codingcpa on Mon, 01 June 2015, 00:46:06
Quote from: sprit on Mon, 01 June 2015, 00:16:22
Quote from: codingcpa on Sun, 31 May 2015, 21:35:15
Nice! :thumb: Here's my Desko-twin Sprit60:

Show Image


sprit edition facew, 62g gold plated springs, 5mm acrylic plate
 
Show Image

Nice Caps !   ;)
 
I may see You left the protection coats on the plate,
It's good idea Not to get dirty   :thumb:

ohhh my lol. that was not intentional. and now... I will have to desolder and resolder the whole board to get that bottom layer off  :confused:

but thanks for the heads up Sprit :thumb:
I did the same thing >_< Only realized after I noticed that the protection sheet increased the plate thickness just enough so that the switches in the plate wouldn't be flush against the pcb. Had to fix it or else I'd have different key heights for some mods and keys
« Last Edit: Mon, 01 June 2015, 14:30:36 by aaronz8 »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #81 on: Mon, 01 June 2015, 20:41:12 »
Quote from: aaronz8 on Mon, 01 June 2015, 14:25:48

I did the same thing >_< Only realized after I noticed that the protection sheet increased the plate thickness just enough
so that the switches in the plate wouldn't be flush against the pcb. Had to fix it or else I'd have different key heights for some mods and keys

There is a simple Assemble guide .   I try to peel the sheet off a bit before shipping.
Acrylic Plates and Cases are very transparent by itself. 

Case Assemble Guide  :  

https://geekhack.org/index.php?topic=60887.msg1488528#msg1488528

https://geekhack.org/index.php?topic=50580.msg1415531#msg1415531 
« Last Edit: Mon, 01 June 2015, 21:44:05 by sprit »
Logged

Offline FreeChemicals

  • Posts: 139
  • Location: euw
Re: Post your Sprit keyboards /cases / PCBs
« Reply #82 on: Tue, 02 June 2015, 03:26:21 »
Quote from: codingcpa on Sun, 31 May 2015, 21:35:15
Quote from: FreeChemicals on Sun, 31 May 2015, 07:40:27
Quote from: sprit on Sun, 31 May 2015, 06:11:41
Clearance issues for 2x3x4mm LEDs with Caps :  Only A row with GMK or Cherry original caps, afaic.
 
Any other reports ?   :)

I don't have any issues with my Desko set (Cherry profile) and 2x3x4 LEDs.

My sprit pcb  + plate. The space cutout is a bit weird, but overall I really like it. The 5mm acrylic plate feels great!

Show Image


Show Image


Nice! :thumb: Here's my Desko-twin Sprit60:
Show Image


sprit edition facew, 62g gold plated springs, 5mm acrylic plate
Show Image


Brother from another mother! Looking good  :thumb:
Logged

Offline SixtyLife

  • Posts: 474
  • Location: New Jersey
Re: Post your Sprit keyboards /cases / PCBs
« Reply #83 on: Wed, 03 June 2015, 16:54:22 »
Ahhhh that's the stufff  :p
Logged
Kishsaver, JP SSK, Displaywriter SSK, 360C, HHKB Type S, X60, Jane v2, Jane v2 CE

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #84 on: Wed, 03 June 2015, 17:50:28 »
Quote from: codingcpa on Wed, 03 June 2015, 16:54:22
Ahhhh that's the stufff  :p
Show Image



It looks cold,  it's Winter time !     >:D 
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #85 on: Fri, 05 June 2015, 01:44:20 »

103261-0 102675-1 102679-2
« Last Edit: Thu, 11 June 2015, 16:40:34 by sprit »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #86 on: Fri, 05 June 2015, 08:15:10 »
Guys!   Do You like the Colors from this production batch?    ::)

Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #87 on: Fri, 05 June 2015, 08:32:30 »
« Last Edit: Thu, 11 June 2015, 16:44:25 by sprit »
Logged

Offline quochung1989

  • Vintage Cherry Collector
  • Posts: 1187
  • Location: Ebay heaven.
  • Frenzy Classic.
Re: Post your Sprit keyboards /cases / PCBs
« Reply #88 on: Fri, 05 June 2015, 10:51:36 »
Logged

Offline retrochick

  • Posts: 600
  • goodbye my wallet
Re: Post your Sprit keyboards /cases / PCBs
« Reply #89 on: Sat, 06 June 2015, 21:20:16 »
Here's a few pics of mine. Love how it feels. Lots of thocking!




Link to full build in sig  ^-^
Logged


Cherry is love. Topre is life. ~raymogi

Offline rpeterclark

  • Posts: 355
  • Location: Florida
  • RPTR ❌
Re: Post your Sprit keyboards /cases / PCBs
« Reply #90 on: Sun, 07 June 2015, 12:25:32 »
So, enjoy the Spirit 60% PCB so much that I have two.  :)



I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.



Warm and cool lighting.



Logged

Offline flabbergast

  • Posts: 234
  • Location: UK
Re: Post your Sprit keyboards /cases / PCBs
« Reply #91 on: Sun, 07 June 2015, 13:09:08 »
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

Show Image


I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.

Show Image


Warm and cool lighting.

Show Image


Show Image

The bottom-side LEDs - does SPRiT's 60% PCB support them, or was it a "homebrew" solution? (Looking at the pics of the PCBs in the other SPRiT's thread, I didn't see extra pads for LEDs are resistors there...)
Logged

Offline rpeterclark

  • Posts: 355
  • Location: Florida
  • RPTR ❌
Re: Post your Sprit keyboards /cases / PCBs
« Reply #92 on: Sun, 07 June 2015, 14:27:31 »
Quote from: flabbergast on Sun, 07 June 2015, 13:09:08
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

Show Image


I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.

Show Image


Warm and cool lighting.

Show Image


Show Image

The bottom-side LEDs - does SPRiT's 60% PCB support them, or was it a "homebrew" solution? (Looking at the pics of the PCBs in the other SPRiT's thread, I didn't see extra pads for LEDs are resistors there...)

Homebrew! 2x3x4mm LEDs in the switches and SMD LEDs sharing the same pads on the bottom. The LED brightness decreases a bit, but it's still bright enough.
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Post your Sprit keyboards /cases / PCBs
« Reply #93 on: Mon, 08 June 2015, 02:55:19 »
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

Show Image


I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.

Show Image


Warm and cool lighting.

Show Image


Show Image


Those are both fantastic!  Especially the yellow one ;D
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline flabbergast

  • Posts: 234
  • Location: UK
Re: Post your Sprit keyboards /cases / PCBs
« Reply #94 on: Mon, 08 June 2015, 04:26:19 »
Quote from: rpeterclark on Sun, 07 June 2015, 14:27:31
Homebrew! 2x3x4mm LEDs in the switches and SMD LEDs sharing the same pads on the bottom. The LED brightness decreases a bit, but it's still bright enough.
Nice work!
Logged

Offline rpeterclark

  • Posts: 355
  • Location: Florida
  • RPTR ❌
Re: Post your Sprit keyboards /cases / PCBs
« Reply #95 on: Mon, 08 June 2015, 06:56:37 »
Quote from: rowdy on Mon, 08 June 2015, 02:55:19
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

Show Image


I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.

Show Image


Warm and cool lighting.

Show Image


Show Image


Those are both fantastic!  Especially the yellow one ;D

Thanks!

Its been pointed out me that I've been incorrectly referring to Sprit as Spirit. I've seen his name a bunch of times, but it just never registered correctly in my brain. I feel bad.

Sorry Sprit!
Logged

Offline beehatch

  • baehatch
  • * Exquisite Elder
  • Posts: 1810
Re: Post your Sprit keyboards /cases / PCBs
« Reply #96 on: Mon, 08 June 2015, 13:35:51 »
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

Show Image


I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.

Show Image


Warm and cool lighting.

Show Image


Show Image


Both of these look awesome! Nice to see some yellow LED love  :D
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #97 on: Thu, 11 June 2015, 15:25:15 »
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.
Show Image


Warm and cool lighting.

Show Image



Wow!  Nice homebrew!   

I was going to make a Back LED sign with pinky SMD  LEDs   :    I  Loved You !      :-* 

* SMD LEDs  (2012 size  2.0 x 1.2mm  =  0805 size (inch)    :     ebay.com  :  SMD 0805 LED     $4/100pcs  Shipped  (half the price than a year ago)

Spirit = Sprit    ;) 
« Last Edit: Thu, 11 June 2015, 16:35:49 by sprit »
Logged

Offline sprit

  •  Post Editing Timeout
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: Post your Sprit keyboards /cases / PCBs
« Reply #98 on: Thu, 11 June 2015, 15:28:50 »
Quote from: rpeterclark on Mon, 08 June 2015, 06:56:37

Thanks!

Its been pointed out me that I've been incorrectly referring to Sprit as Spirit. I've seen his name a bunch of times, but it just never registered correctly in my brain. I feel bad.

Sorry Sprit!

BTW,  Do You like the 5mm thick Acrylic Plates?    ::) 
Logged

Offline rpeterclark

  • Posts: 355
  • Location: Florida
  • RPTR ❌
Re: Post your Sprit keyboards /cases / PCBs
« Reply #99 on: Thu, 11 June 2015, 15:32:33 »
Quote from: sprit on Thu, 11 June 2015, 15:25:15
Quote from: rpeterclark on Sun, 07 June 2015, 12:25:32
So, enjoy the Spirit 60% PCB so much that I have two.  :)

I added SMD LEDs to the one in the TEXT acrylic case for a backlighting effect.
Show Image


Warm and cool lighting.

Show Image



Wow!  Nice homebrew!   

I was going to make a back LED sign with pinky SMD (2012 size  2.0 x 1.2mm) LEDs   :    I  Loved You !   

Spirit = Sprit    ;)

Thanks! :D

Quote from: sprit on Thu, 11 June 2015, 15:28:50
Quote from: rpeterclark on Mon, 08 June 2015, 06:56:37

Thanks!

Its been pointed out me that I've been incorrectly referring to Sprit as Spirit. I've seen his name a bunch of times, but it just never registered correctly in my brain. I feel bad.

Sorry Sprit!

BTW,  Do You like the 5mm thick Acrylic Plates?    ::) 

I do, I've recommended it to a few people! It's quite sturdy and I think it has a great sound to it. It's also great at distributing the LED lights.
Logged
Pages: « 1 [2] 3 »  All   Go Up
« previous next »