NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
https://www.reddit.com/r/mechmarket/comments/4uj9qe/meta_scammer_umrbeckshl/Not sure how true this is, but there's a red flag about beckshl.
Quote from: Proyoyo on Sat, 06 August 2016, 08:48:54https://www.reddit.com/r/mechmarket/comments/4uj9qe/meta_scammer_umrbeckshl/Not sure how true this is, but there's a red flag about beckshl.Something went wrong and I'm trying to sell my kit to refund this case.
Hey Elton, I've sent you a PM but haven't heard back. I really need the parts I'm missing.
Quote from: Chewypost on Thu, 11 August 2016, 17:46:34Hey Elton, I've sent you a PM but haven't heard back. I really need the parts I'm missing.What are you missing?
Also having a bit of trouble with flashing my keyboard. I think I may have messed up flashing it. The keyboard is recognized, but no lights or keys register with they computer.
Quote from: Chewypost on Thu, 11 August 2016, 19:02:42Also having a bit of trouble with flashing my keyboard. I think I may have messed up flashing it. The keyboard is recognized, but no lights or keys register with they computer.PM me your email and I'll send you my HEX configuration and try flashing it with that.
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?
Quote from: omgar on Thu, 11 August 2016, 21:25:54Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Quote from: Chewypost on Thu, 11 August 2016, 21:31:51Quote from: omgar on Thu, 11 August 2016, 21:25:54Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.Sorry, I mean literally flashing the HEX file through Atmel FLIP? You would build your HEX through O2D and then flash it with FLIP. You could follow this guide save for the HEX building part. Proceed with caution.
Quote from: Zombly on Wed, 10 September 2014, 07:39:07Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and blackHave you checked out Toxic set?It would take sometime to find one now though
Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and black
Quote from: omgar on Thu, 11 August 2016, 22:06:29Quote from: Chewypost on Thu, 11 August 2016, 21:31:51Quote from: omgar on Thu, 11 August 2016, 21:25:54Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.Sorry, I mean literally flashing the HEX file through Atmel FLIP? You would build your HEX through O2D and then flash it with FLIP. You could follow this guide save for the HEX building part. Proceed with caution.Just tried doing that. Erase and Blank Check pass but the Program step fails.
Quote from: Jokrik on Wed, 10 September 2014, 09:51:20Quote from: Zombly on Wed, 10 September 2014, 07:39:07Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and blackHave you checked out Toxic set?It would take sometime to find one now thoughQuote from: Chewypost on Thu, 11 August 2016, 22:51:18Quote from: omgar on Thu, 11 August 2016, 22:06:29Quote from: Chewypost on Thu, 11 August 2016, 21:31:51Quote from: omgar on Thu, 11 August 2016, 21:25:54Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.Sorry, I mean literally flashing the HEX file through Atmel FLIP? You would build your HEX through O2D and then flash it with FLIP. You could follow this guide save for the HEX building part. Proceed with caution.Just tried doing that. Erase and Blank Check pass but the Program step fails.Appleonama had a similar problem with his Orion V2 PCB. Maybe he wouldn't mind helping you out?
Quote from: omgar on Fri, 12 August 2016, 08:26:37Quote from: Jokrik on Wed, 10 September 2014, 09:51:20Quote from: Zombly on Wed, 10 September 2014, 07:39:07Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and blackHave you checked out Toxic set?It would take sometime to find one now thoughQuote from: Chewypost on Thu, 11 August 2016, 22:51:18Quote from: omgar on Thu, 11 August 2016, 22:06:29Quote from: Chewypost on Thu, 11 August 2016, 21:31:51Quote from: omgar on Thu, 11 August 2016, 21:25:54Quote from: Chewypost on Thu, 11 August 2016, 21:25:19Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help pleaseHave you tried flashing through FLIP?I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.Sorry, I mean literally flashing the HEX file through Atmel FLIP? You would build your HEX through O2D and then flash it with FLIP. You could follow this guide save for the HEX building part. Proceed with caution.Just tried doing that. Erase and Blank Check pass but the Program step fails.Appleonama had a similar problem with his Orion V2 PCB. Maybe he wouldn't mind helping you out?You have to hole the top right key and then plug the keyboard in to get it into DFU mode. Holding that button is most likely for some type of function.
Just a quick question... I saw that the pcb supports rgb smd leds, but is that only for the underlight, or can we do it for switches? For instance, would these work with zeal's rgb lights?Thanks!
Programmed mine without a hitch the first time, but can't seem to get it to program again with ATMEL FLip or with the DFU programmer.. it doesn't seem to have the correct driver installed. Holding the right key above backspace and plugging it in does not seem to get the ATMEL USB to show up under Device Manager either.. does anyone know how I can get the correct drive installed? Thanks!
Quote from: breitling on Wed, 14 September 2016, 16:32:09Programmed mine without a hitch the first time, but can't seem to get it to program again with ATMEL FLip or with the DFU programmer.. it doesn't seem to have the correct driver installed. Holding the right key above backspace and plugging it in does not seem to get the ATMEL USB to show up under Device Manager either.. does anyone know how I can get the correct drive installed? Thanks!If I recall correctly, the key you want to hold is the upper right most key in the corner. Try that one.
Figured it out... someone another driver got installed over it and it was showing up in device manager under Universal Serial Bus Devices... I deleted that driver and it reverted back to the original driver and works now. Thanks!!
Have anyone managed to turn of the underlight LED's? Can't find any option for it in O2D programmer. Also have anyone tested some other firmware? For example TMK?
I'm almost done with porting octagon v2 to tmk. Matrix works, status and rgb leds work. I'll have to test switch leds (not soldered yet). I'm not sure how to let the user control all these led combinations.
I traced the octagon v2 pcb and created a low level api in tmk to control the hardware. I haven't spend any time on led effects, maybe someone will carry on from here. This firmware isn't much tested and should only be used by tmk experts first.Have funhttps://github.com/xauser/tmk_keyboard/tree/xauser
Quote from: xauser on Thu, 03 November 2016, 14:09:42I traced the octagon v2 pcb and created a low level api in tmk to control the hardware. I haven't spend any time on led effects, maybe someone will carry on from here. This firmware isn't much tested and should only be used by tmk experts first.Have funhttps://github.com/xauser/tmk_keyboard/tree/xauserI used xauser's tmk port for my Octagon V1s. Recommended, would flash firmware again.