Hmm what a shame. I was friends with him on here before he left, and talked to him quite a lot in PMs. I got 3 kmac2's from him to assemble without problem, but I think it may have been marked up a bit. I also helped him proxy stuff, but luckily I had no problems.So you have to ask, "if he got 3 kmac 2's from you why is he looking for more"? He is the ultimate flipper.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I have heard bad things from at least 2 other GHers about him as well after I talked to them about what happened.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I have heard bad things from at least 2 other GHers about him as well after I talked to them about what happened.
he has literally just bought a GH t shirt from me
he has literally just bought a GH t shirt from me
why, you think he's gonna try to flip the shirt for +$5 profit??
:))
Sorry to hear that man. The Balanar hero in Dota is kinda douche-looking too LOL!I was thinking this too..
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I have heard bad things from at least 2 other GHers about him as well after I talked to them about what happened.
Oh NOs... what will all the Ghers wear to work on monday....
LOLI had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I have heard bad things from at least 2 other GHers about him as well after I talked to them about what happened.Show Image(http://1.bp.blogspot.com/_n7RltmTdk-g/TGrTWU1zFvI/AAAAAAAAVQM/OV_52ZT0tsQ/s1600/Glass+Houses.jpg)
he has literally just bought a GH t shirt from me
Yeah, I just noticed his the one PMing me about my CCnG set... :eek:he has literally just bought a GH t shirt from me
I would refund and cancel the order if I were you.
I hate to even say it, but it makes me wish there was a "Wall of Shame". Unfortunately, I think things would get out of hand in a hurry, so it'd have to be moderated and who the hell would want to do that?
It's only when posts like these pop up that a lot of this information comes to light. But in six months this thread will be buried. :(
I hate to even say it, but it makes me wish there was a "Wall of Shame". Unfortunately, I think things would get out of hand in a hurry, so it'd have to be moderated and who the hell would want to do that?
It's only when posts like these pop up that a lot of this information comes to light. But in six months this thread will be buried. :(
Start a blacklist of people who to won't trade with.
I hate to even say it, but it makes me wish there was a "Wall of Shame". Unfortunately, I think things would get out of hand in a hurry, so it'd have to be moderated and who the hell would want to do that?
It's only when posts like these pop up that a lot of this information comes to light. But in six months this thread will be buried. :(
Start a blacklist of people who to won't trade with.
There is this one guy...,who offers toast and never delivers.
he has literally just bought a GH t shirt from me
I would refund and cancel the order if I were you.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
I have heard bad things from at least 2 other GHers about him as well after I talked to them about what happened.
Oh the irony!
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
the profosist is a scammer? I thought he was just overbooked...
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
the profosist is a scammer? I thought he was just overbooked...
Well he has taken the money and only offered poor excuses and keeps stalling.
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
the profosist is a scammer? I thought he was just overbooked...
Well he has taken the money and only offered poor excuses and keeps stalling.
well yea, I've heard of that part, but that's why I thought he's overbooked.. Is every one in accord that he's full on scamming?
I had a issue with him quite a while back. Which was quite large ($400). I found out later that he scammed the guy to get that item he sold me as well on another forum.
Interesting that you would come in here and share your story about a scammer.
Well look in the mirror.
the profosist is a scammer? I thought he was just overbooked...
Well he has taken the money and only offered poor excuses and keeps stalling.
well yea, I've heard of that part, but that's why I thought he's overbooked.. Is every one in accord that he's full on scamming?
I don't think that it is intentional but he has royally ****ed up and doesn't have the capability to deal with it.
He hasn't ordered the stuff but cannot refund the money....
I believe so.
Guys if u want to talk about the issues with my gb start another thread as this is about balamar.
Guys if u want to talk about the issues with my gb start another thread as this is about balamar.
Maybe if you answered the posed questions in the existing threads, it wouldn't leak into here. You're such a ****in' joke.
Guys if u want to talk about the issues with my gb start another thread as this is about balamar.
ah... you 2 should just kiss and make up.... it's just a freaking keyboard.
Erm, Chul I did mention that I wanted to protect his privacy. I could ask the same of you; since we were talking about it, go ahead and state the name if you want to lol. I don't really believe in this kinds of threads because they will always balloon up into flaming each other. Not to mention people thread crapping etc. So forgive me if I don't want to be the one to drag anyone else into this.
I never told anyone I bought 3. I think you can ask WFD about that because I had 3 KMACs sent to him for assembly. Not all 3 were mine, I was helping friends as well. Besides even if I did, is having more than 1 KMAC a crime on a KEYBOARD forum rofl??
What exactly am I lying about? The keyboard arrived in Singapore and was at the post office. I was staying in hall/hostel and picked it up on the way back home. Opened it that night, discovered the issue and contacted you. What should I explain?
Oh for the record, I don't give a crap about who posts on whose side etc. This isn't a popularity contest . The facts are there. Didn't you get lambasted on this very forum for profiteering?
By the way,
You misunderstand Korean, that was not fair trade.
They very regreted to buy something with extremly price from you.
Me? I'll let them know your ID(actually already)and all Korean community.
You understimate my effective on korea's community.
Good luck with reselling with our Koreans in future.
Anyway,
I'll just follow Paypal's decision no matter how it may turn out.
But if you win, you shoudn't do somthing to That Kmac2 ;)
I warn you.
Did i explain you guys difficulty?
- The korea post tracking system showned
You got it on 12. June (you can't see your name?)
- You said you picked up it on 19. June, but if you're
they absolutely gave me The addressee(you) was absent.
- Those facts, even 4-5 years old children can understand lol.
Did i explain you guys difficulty?
- The korea post tracking system showned
You got it on 12. June (you can't see your name?)
- You said you picked up it on 19. June, but if you're
they absolutely gave me The addressee(you) was absent.
- Those facts, even 4-5 years old children can understand lol.
Yes I did pick it up on 19th June. Can't say anything more because I don't know anything more than that.
Edit: Just saw Smallfry's thread and it really shook me up. I'm going to leave this to PayPal's discretion here because it really does seem childish when compared to stuff that happens in life. I'm done with this thread.
By the way,
You misunderstand Korean, that was not fair trade.
They very regreted to buy something with extremly price from you.
Me? I'll let them know your ID(actually already)and all Korean community.
You understimate my effective on korea's community.
Good luck with reselling with our Koreans in future.
Anyway,
I'll just follow Paypal's decision no matter how it may turn out.
But if you win, you shoudn't do somthing to That Kmac2 ;)
I warn you.
Just saw your edit. About the ID etc go ahead. I'm not dealing with the 'Korean community', I'm dealing with people that I have had no trouble with in the past. If you're gonna resort to throwing your weight around with threats about your 'effective on korea's community' go ahead.
I find your 'warning' about the KMAC 2 hilarious. I will ship it as safe as how it was shipped to me if not safer. However, who is to say you won't pour water onto it and then blame me?
Thanks to that you made me a racist.
Thanks to that you made me a racist.
I'm sorry, but that's a pretty terrible thing to say... and has no justification. And a crazy overreaction.
Okay then, I'll give him the benefit of the doubt and quietly disappear behind the bushes :)
I thought you were referring to me! :p Anyway, I'm not supposed to be talking, while hiding and all.
@ demik: First off, I did check my end of things after the last PM exchange we had and I did indeed send you an incomplete address. I also did PM you about that apologizing but if you did not read/receive it, you can take this as an official apology for that. However, you should also share the duration ( ~4 months) over which the entire 'deal' lasted. I know you were doing me a favour and I was grateful throughout the entire process but like I stated in pms that time, not receiving a reply for long periods of time didn't help. You said you were busy but that doesn't make sense because you were online and posting etc. Anyways, did I not pay you for the shipping? I believe I stated I was waiting for funds to transfer from my bank and when it did I paid you. So again, I don't think I was acting shady because throughout the entire exchange my items were with you and you were the one lacking in communication. This especially compounded with how you magically were hyper enthused about pms when asking for your shipping fee and why I didn't reply after a single day was quite frankly hilarious when compared to the many many days I waited patiently for your replies.
jeezus, I never said I wasn't gonna send you a picture now did I? A minute ago and now still I am willing to send you a picture. Did I say I can't? Did I say anything about doing it today? Or is it my fault for having a life and going places?
How the hell can I possibly take advantage of you in this situation? I've received my darned package dammit. Please tell me what the **** I stand to gain by wasting my time on this **** with you. I want to drop it and move along but no suddenly that's construed as guilt on my part. Goddamn.
Also if you wanna play semantics, go ahead. If you don't know the different measures a post office takes to contact and deliver mail in my country, go and find out for yourself. I'm not going to stand here and explain it to you. I've clearly told you what you left out and told you I'll send you a picture. Damn.
His words sound very nice on SMS and PM, always justifying his behavior, but how he actually behaves is completely different.
This thread is about photoelectric and I sharing a bush now. giggityHussy!
Disgraceful to Singapore.
Balanar did you try unscrewing the board and flipping the PCB, seems like a cold solder joint problem. You can fix it in matter of seconds before you guys get into more unwanted argument.
if there are so many Koreans now on gh where is the Korean talk? besides statecraft that it's.no seriously I consume allot of Korean content by osmosis cuz of my wife but it just seems you guys would rather trade and flip around cc's.
This is very sad. Sorry to see this has happened. I have a set of blockers if you need them.
Interesting that he has not posted lately.
John
this is bad.... should at least ship back everything if he's true to himself... >.<
It's too bad to know that... feel sorry for you -_____-
Test that key that balanar supposedly say doesn't work smoothly. That's what sparked the problem in the first place.
Yes I did pick it up on 19th June. Can't say anything more because I don't know anything more than that.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
I came in here because I received an email from PayPal asking me about what items I received and shipped back. The blockers and USB cable are with me. I was extremely busy and completely forgot about those items when shipping the keyboard. I will ship them over with tracking as soon as I am able to. This should happen within a week.
The dent was most definitely not there when I was shipping it to you and I used exactly the same amount of bubblewrap you did so I don't think you can fault my shipping. Glad to hear at least you agree and admit the key is not working.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
You totally don't know about the aluminium and anodizing.
If you have spare time and read this
http://en.wikipedia.org/wiki/Anodizing
Anodizing is not solution, it's just to coat (a metallic surface) electrolytically
with a protective or decorative oxide.
But that dent is physical damage, it cannot be covered by anodizing.
Actually there is only one solution, change the bottom, opps.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
You totally don't know about the aluminium and anodizing.
If you have spare time and read this
http://en.wikipedia.org/wiki/Anodizing
Anodizing is not solution, it's just to coat (a metallic surface) electrolytically
with a protective or decorative oxide.
But that dent is physical damage, it cannot be covered by anodizing.
Actually there is only one solution, change the bottom, opps.
Actually, I do know a bit about aluminum and anodizing. The re-anodizing part I was talking about is to match the color of what you can use to fix it. You can use epoxy to fill in the dent. After filling it in, you can sand it down and have it in a similar shape as what it was before. You can use aluminum epoxy, but I am not sure if you can anodize that. The aluminum particles in the epoxy may dissolve. I do recommend getting some epoxy and letting it dry to see the actual color. Then re-anodize the case to the color of the epoxy and apply the epoxy then. If you do this carefully, you may not even need to sand it.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
You totally don't know about the aluminium and anodizing.
If you have spare time and read this
http://en.wikipedia.org/wiki/Anodizing
Anodizing is not solution, it's just to coat (a metallic surface) electrolytically
with a protective or decorative oxide.
But that dent is physical damage, it cannot be covered by anodizing.
Actually there is only one solution, change the bottom, opps.
Actually, I do know a bit about aluminum and anodizing. The re-anodizing part I was talking about is to match the color of what you can use to fix it. You can use epoxy to fill in the dent. After filling it in, you can sand it down and have it in a similar shape as what it was before. You can use aluminum epoxy, but I am not sure if you can anodize that. The aluminum particles in the epoxy may dissolve. I do recommend getting some epoxy and letting it dry to see the actual color. Then re-anodize the case to the color of the epoxy and apply the epoxy then. If you do this carefully, you may not even need to sand it.
Yeah, that's the way to solve though it can not be covered as the original condition.
Espcially titan color-anodizing, it's very difficult to anodize,
Even the top and bottom housing of the same kit, the color is a little bit or quite bit
different within them.
Anyway, really Thanks your helpful comment.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
You totally don't know about the aluminium and anodizing.
If you have spare time and read this
http://en.wikipedia.org/wiki/Anodizing
Anodizing is not solution, it's just to coat (a metallic surface) electrolytically
with a protective or decorative oxide.
But that dent is physical damage, it cannot be covered by anodizing.
Actually there is only one solution, change the bottom, opps.
Actually, I do know a bit about aluminum and anodizing. The re-anodizing part I was talking about is to match the color of what you can use to fix it. You can use epoxy to fill in the dent. After filling it in, you can sand it down and have it in a similar shape as what it was before. You can use aluminum epoxy, but I am not sure if you can anodize that. The aluminum particles in the epoxy may dissolve. I do recommend getting some epoxy and letting it dry to see the actual color. Then re-anodize the case to the color of the epoxy and apply the epoxy then. If you do this carefully, you may not even need to sand it.
Yeah, that's the way to solve though it can not be covered as the original condition.
Espcially titan color-anodizing, it's very difficult to anodize,
Even the top and bottom housing of the same kit, the color is a little bit or quite bit
different within them.
Anyway, really Thanks your helpful comment.
You can also just powder coat it, that would make it much easier to match the color in that small area. It will be pretty much unnoticeable if you use a powder coat.
I can't really tell by the pictures, but is that a dent or a chip? The case of a KMAC is aluminum right?
Regardless of whether it is a dent or chip, it is possible to fix. You may have to re-anodize the case though.
You totally don't know about the aluminium and anodizing.
If you have spare time and read this
http://en.wikipedia.org/wiki/Anodizing
Anodizing is not solution, it's just to coat (a metallic surface) electrolytically
with a protective or decorative oxide.
But that dent is physical damage, it cannot be covered by anodizing.
Actually there is only one solution, change the bottom, opps.
Actually, I do know a bit about aluminum and anodizing. The re-anodizing part I was talking about is to match the color of what you can use to fix it. You can use epoxy to fill in the dent. After filling it in, you can sand it down and have it in a similar shape as what it was before. You can use aluminum epoxy, but I am not sure if you can anodize that. The aluminum particles in the epoxy may dissolve. I do recommend getting some epoxy and letting it dry to see the actual color. Then re-anodize the case to the color of the epoxy and apply the epoxy then. If you do this carefully, you may not even need to sand it.
Yeah, that's the way to solve though it can not be covered as the original condition.
Espcially titan color-anodizing, it's very difficult to anodize,
Even the top and bottom housing of the same kit, the color is a little bit or quite bit
different within them.
Anyway, really Thanks your helpful comment.
You can also just powder coat it, that would make it much easier to match the color in that small area. It will be pretty much unnoticeable if you use a powder coat.
Powder coat can be quite thick and it will more than likely mess up and threaded holes or tight tolerances that the case had.
Test that key that balanar supposedly say doesn't work smoothly. That's what sparked the problem in the first place.
Yeah, of course I tested it but unfortunately It was not working smoothly though the led on key works.
If you don't understand this situation exactly, and then go to read whole thing again please.
Test that key that balanar supposedly say doesn't work smoothly. That's what sparked the problem in the first place.
Yeah, of course I tested it but unfortunately It was not working smoothly though the led on key works.
If you don't understand this situation exactly, and then go to read whole thing again please.
I actually did read every post in here, so maybe you're the one that didn't understand me. Regardless of anything else that happened or who caused the "A" key to be damaged, that key is what started this whole problem. So if you got the keyboard back and the "A" key was not problematic like balnar says it was, then it was just an excuses to send it back. That's all I'm trying to say.
Test that key that balanar supposedly say doesn't work smoothly. That's what sparked the problem in the first place.
Yeah, of course I tested it but unfortunately It was not working smoothly though the led on key works.
If you don't understand this situation exactly, and then go to read whole thing again please.
I actually did read every post in here, so maybe you're the one that didn't understand me. Regardless of anything else that happened or who caused the "A" key to be damaged, that key is what started this whole problem. So if you got the keyboard back and the "A" key was not problematic like balnar says it was, then it was just an excuses to send it back. That's all I'm trying to say.
I just wanna refund the money to him and finish whole **** situation, it's my the worst memory on GH.
Anyway when I shipback that Kmac to him, he will make some trouble to harasse me
so this situation will repeat forever.
But you, balanar if you have a small conscience or you're the human you must pay the part of
kmac2's worth was devalued.
Whatever you packed well as like me(actually not like me),
it already happend and you were totally wrong to choose the size of box.
But honestly, maybe he wouldn't pay at all. He even hasn't shipped the left things he took away
until now and I didn't receive any kind of the tracking number.
I'll share this story forever to prevent further victims.
I am very surprised at the amount of emotions people have exhibited over so little money.$500-$600 is a lot of money and I would be upset if something happened.
Don't feed the trolls. You're wasting your time and effort.
Would you buy a Kmac 2 with a damaged case that was "fixed"
I wouldn't and most others would not either.
I do not know the exact prices from this transaction, but I will base this on sherry's prices.
$410.00 for the KMAC2
$42.50 KMAC 2 simple assembly
$22.50 for the vintage blacks @ 0.25 each * 90 switches based on whisky tango's prices. probably higher.
$25.00 to solder the actual switches.
total $500.00 without shipping from korea.I am very surprised at the amount of emotions people have exhibited over so little money.$500-$600 is a lot of money and I would be upset if something happened.
balanar could have resoldered the switch or the diode.
balanar could have properly packed the contents of the package before reshipping back to chaosstep.
chaosstep now has to spend additional $$$ to fix the case on the kmac2 that he was proxying and doesn't even want to own.
chaosstep has to find someone willing to buy a KMAC2 with a "fixed" case.
either way chaosstep is going to loose money on a proxy he didn't want to do anyways.
Would you buy a Kmac 2 with a damaged case that was "fixed"
I wouldn't and most others would not either.
I do not know the exact prices from this transaction, but I will base this on sherry's prices.
$410.00 for the KMAC2
$42.50 KMAC 2 simple assembly
$22.50 for the vintage blacks @ 0.25 each * 90 switches based on whisky tango's prices. probably higher.
$25.00 to solder the actual switches.
total $500.00 without shipping from korea.I am very surprised at the amount of emotions people have exhibited over so little money.$500-$600 is a lot of money and I would be upset if something happened.
balanar could have resoldered the switch or the diode.
balanar could have properly packed the contents of the package before reshipping back to chaosstep.
chaosstep now has to spend additional $$$ to fix the case on the kmac2 that he was proxying and doesn't even want to own.
chaosstep has to find someone willing to buy a KMAC2 with a "fixed" case.
either way chaosstep is going to loose money on a proxy he didn't want to do anyways.
$500 blips happen also.. still blip level.
If it's under $5000 it's a blip...
If you get mad over $500 stuff, you're going to get a heart attacks when you lose $5000.
It is always easier to screw someone over for more money if you got away with it previously for less money.
Would you buy a Kmac 2 with a damaged case that was "fixed"
I wouldn't and most others would not either.
I do not know the exact prices from this transaction, but I will base this on sherry's prices.
$410.00 for the KMAC2
$42.50 KMAC 2 simple assembly
$22.50 for the vintage blacks @ 0.25 each * 90 switches based on whisky tango's prices. probably higher.
$25.00 to solder the actual switches.
total $500.00 without shipping from korea.I am very surprised at the amount of emotions people have exhibited over so little money.$500-$600 is a lot of money and I would be upset if something happened.
balanar could have resoldered the switch or the diode.
balanar could have properly packed the contents of the package before reshipping back to chaosstep.
chaosstep now has to spend additional $$$ to fix the case on the kmac2 that he was proxying and doesn't even want to own.
chaosstep has to find someone willing to buy a KMAC2 with a "fixed" case.
either way chaosstep is going to loose money on a proxy he didn't want to do anyways.
$500 blips happen also.. still blip level.
If it's under $5000 it's a blip...
If you get mad over $500 stuff, you're going to get a heart attacks when you lose $5000.
People for whom $500 is a significant amount of money are unlikely to get themselves into the situation where $5000 is owed.
Not everyone operates at the same scale.
And there is also the principal of the thing. Let someone get away with $100 this time, and it will be $500 next time. And $5000 after that.
I just wanna refund the money to him and finish whole **** situation, it's my the worst memory on GH.
Anyway when I shipback that Kmac to him, he will make some trouble to harasse me
so this situation will repeat forever.
But you, balanar if you have a small conscience or you're the human you must pay the part of
kmac2's worth was devalued.
Whatever you packed well as like me(actually not like me),
it already happend and you were totally wrong to choose the size of box.
But honestly, maybe he wouldn't pay at all. He even hasn't shipped the left things he took away
until now and I didn't receive any kind of the tracking number.
I'll share this story forever to prevent further victims.
Every one chill, this is a tiny $100 blip..
I am very surprised at the amount of emotions people have exhibited over so little money.
It's like Chaos step wants Balanar to be waterboarded.. :))
Choasstep, you're right that Balanar may indeed be a bad trader, but you've taken it upon yourself to become "petty".
I just wanna refund the money to him and finish whole **** situation, it's my the worst memory on GH.
Anyway when I shipback that Kmac to him, he will make some trouble to harasse me
so this situation will repeat forever.
But you, balanar if you have a small conscience or you're the human you must pay the part of
kmac2's worth was devalued.
Whatever you packed well as like me(actually not like me),
it already happend and you were totally wrong to choose the size of box.
But honestly, maybe he wouldn't pay at all. He even hasn't shipped the left things he took away
until now and I didn't receive any kind of the tracking number.
I'll share this story forever to prevent further victims.
Every one chill, this is a tiny $100 blip..
I am very surprised at the amount of emotions people have exhibited over so little money.
It's like Chaos step wants Balanar to be waterboarded.. :))
Choasstep, you're right that Balanar may indeed be a bad trader, but you've taken it upon yourself to become "petty".
If you think me to become "Petty"
Why don't you cover that very small money for money? I'm Poor, help me lol.
Actaully You underestimate the money.
Yeah the value is totally depend on people,
but If I donated 100$~500$ you thought it's just a blip and a small money to UNICEF,
They would help a lot of people, even saved their life.
I just wanna refund the money to him and finish whole **** situation, it's my the worst memory on GH.
Anyway when I shipback that Kmac to him, he will make some trouble to harasse me
so this situation will repeat forever.
But you, balanar if you have a small conscience or you're the human you must pay the part of
kmac2's worth was devalued.
Whatever you packed well as like me(actually not like me),
it already happend and you were totally wrong to choose the size of box.
But honestly, maybe he wouldn't pay at all. He even hasn't shipped the left things he took away
until now and I didn't receive any kind of the tracking number.
I'll share this story forever to prevent further victims.
Every one chill, this is a tiny $100 blip..
I am very surprised at the amount of emotions people have exhibited over so little money.
It's like Chaos step wants Balanar to be waterboarded.. :))
Choasstep, you're right that Balanar may indeed be a bad trader, but you've taken it upon yourself to become "petty".
If you think me to become "Petty"
Why don't you cover that very small money for money? I'm Poor, help me lol.
Actaully You underestimate the money.
Yeah the value is totally depend on people,
but If I donated 100$~500$ you thought it's just a blip and a small money to UNICEF,
They would help a lot of people, even saved their life.
Chaos, tp4 is just trolling you. In other words, he's just teasing you. No point in taking it seriously :P
could you post pictures of the damage?
to see that KMAC2 is being turned into that condition really aches my heart.... :'( :'(
it is definitely difficult to get a new owner for that KMAC2 but I hope you can find it..... that sad KMAC2 needs a new home...
and please don't hate GH because of one bad apple Chaos... hope you can remain active in this forum my friend :'(
could you post pictures of the damage?
He has, on the previous page.
Balanar
Do you mind giving us details about your local rep? It would be good to clear the air. :thumb:
"You are ignoring this user. Show me the post. "
and then I just don't want to click it until you admit all your faults (not just for me, for all members with you did), you talked too much as always.
I don't have time to read at all.
Sigh, If you have spare time to excuse like that.
Just Stop tend to have weird attitude and show people and ask for sympathy.
Just tell and do not something with them,
"Sorry" and don't cheat newbies(even 4-5times than the retail price). That's all we want, easy and that's even good for you.
All people are not perfect, make mistakes sometimes of course.
But the important thing is that people could admit and fix their mistakes. That's the one reason why Human beings differ from other animals.
PS. I tried to end this topic, but you still update it lol. Thanks.
Balanar
Do you mind giving us details about your local rep? It would be good to clear the air. :thumb:
Sure, here's a link to my profile which has a local version of something like heatware:
http://forums.vr-zone.com/itrader.php?u=128679
Um... I checked out your link, and found this:
http://forums.vr-zone.com/traders-corner/2654179-pho3nixor-trade-experience.html
Seems too long to cut and paste, but anyone who wants can at least follow this link now.Balanar
Do you mind giving us details about your local rep? It would be good to clear the air. :thumb:
Sure, here's a link to my profile which has a local version of something like heatware:
http://forums.vr-zone.com/itrader.php?u=128679