Author Topic: [IC] JMargo-70 - [CTRL]ALT & GON (Read 24818 times)

evolveS · « **Reply #50 on:** Tue, 11 November 2014, 08:36:44 »

I'm definitely in for a pcb.
Case is a maybe.

margo baggins · « **Reply #51 on:** Wed, 12 November 2014, 06:43:28 »

Quote from: jinq-sea on Tue, 11 November 2014, 08:17:26

I had totally forgotten about this! Since we spoke about it, it's gathered quite a bit of interest. Fingers crossed we hit the magic number... Cheers Margo!

Thanks brother

Quote from: evolveS on Tue, 11 November 2014, 08:36:44

I'm definitely in for a pcb.
Case is a maybe.

Thanks mayn

azhdar · « **Reply #52 on:** Wed, 12 November 2014, 07:22:15 »

Count me in for a PCB , case will probably be too much for me though .

I guess we will be able to order the electronics from either CtrlAlt or GON to avoid multiple shipments costs ?

margo baggins · « **Reply #53 on:** Wed, 19 November 2014, 05:38:11 »

Quote from: azhdar on Wed, 12 November 2014, 07:22:15

Count me in for a PCB , case will probably be too much for me though .

I guess we will be able to order the electronics from either CtrlAlt or GON to avoid multiple shipments costs ?

thanks bro

Yeah I'm sure there will be something like that available at the time.

azhdar · « **Reply #54 on:** Sun, 28 December 2014, 12:49:24 »

Any updates on this ?

bueller · « **Reply #55 on:** Wed, 28 January 2015, 04:32:10 »

Really hope this takes off sometime this year, this layout would solve so many problems with gaming on a 60% board. It seems like such an obvious improvement too, most people are looking to cut space from the keyboard horizontally, the little space saved by cutting off the F row on 60% boards isn't really worth it IMO.

azhdar · « **Reply #56 on:** Wed, 28 January 2015, 04:59:55 »

Quote from: bueller on Wed, 28 January 2015, 04:32:10

Really hope this takes off sometime this year, this layout would solve so many problems with gaming on a 60% board. It seems like such an obvious improvement too, most people are looking to cut space from the keyboard horizontally, the little space saved by cutting off the F row on 60% boards isn't really worth it IMO.

Hopefully , when both Margo and GON become less busy , we'll see updates on it.

radio_killah · « **Reply #57 on:** Thu, 29 January 2015, 13:15:05 »

http://www.banggood.com/Noppoo-Nano75-s-60-Cherry-MX-Red-Switch-Mechanical-Gaming-Keyboard-p-966287.html

tristan1035 · « **Reply #58 on:** Fri, 06 February 2015, 14:00:19 »

I'm definitely in for a PCB, hopefully we can get a cheaper case though.

ImpendingxDoom · « **Reply #59 on:** Sun, 08 February 2015, 00:30:08 »

Wow, I hope you find enough interest. Amazing board

bueller · « **Reply #60 on:** Sun, 08 February 2015, 00:33:03 »

The world needs this keyboard.

Ouro · « **Reply #61 on:** Sun, 08 February 2015, 19:41:10 »

Quote from: bueller on Sun, 08 February 2015, 00:33:03

The world needs this keyboard.

I need it too, I don't have enough keyboards to hold all my keysets

)

mp101 · « **Reply #62 on:** Sat, 14 February 2015, 11:29:11 »

I'd be interested, ISO is preferred for me too.

could be my first build, unless I get something else from GON

rsadek · « **Reply #63 on:** Wed, 25 February 2015, 04:05:14 »

I'm interested, count me in!

Thumper_ · « **Reply #64 on:** Thu, 12 March 2015, 03:07:53 »

I'm in. ISO is a really pain sometimes.. so yes yes yes yes!

Lain1911 · « **Reply #65 on:** Thu, 12 March 2015, 03:16:27 »

wow this looks really interesting.

DelKey · « **Reply #66 on:** Thu, 12 March 2015, 20:16:29 »

I'd be in for a set with an AL case for sure!

Lpwl · « **Reply #67 on:** Fri, 13 March 2015, 09:56:44 »

Margo & GON are carrying some heavy amount of work these days.

Any timeline for this project ?

Late summer this year ?

Frizer · « **Reply #68 on:** Wed, 08 April 2015, 15:47:19 »

Interested, would go for the crystal housing.

Sifo · « **Reply #69 on:** Wed, 08 April 2015, 15:54:57 »

For the record this has been my dream layout to play StarCraft for years. The only thing I'd like is for a standard right shift option.

Something like this with the proper spacing between the F-rows

I'm down for a PCB.

rsadek · « **Reply #70 on:** Wed, 08 April 2015, 20:16:13 »

I'm interested. Is it possible to get an inverted T in the layout? It looks like it but I'm not sure.

What do you think about a smaller vertical footprint with lower F row like the one Sifo posted?

-R

baldgye · « **Reply #71 on:** Thu, 09 April 2015, 03:45:23 »

I'm interested in this ISO ballin with f and winkeys... what would be the final price with the crystal case etc (and is it being built an option for plebs like me)?

Quote from: Sifo on Wed, 08 April 2015, 15:54:57

For the record this has been my dream layout to play StarCraft for years. The only thing I'd like is for a standard right shift option.

Show Image

Something like this with the proper spacing between the F-rows :D

I'm down for a PCB.

was thinking along the same lines haha

fknraiden · « **Reply #72 on:** Thu, 09 April 2015, 04:08:20 »

interested in case if it isn't too thin like all gons stuff for handwiring.

CommonCurt · « **Reply #73 on:** Thu, 09 April 2015, 05:57:04 »

Quote from: Sifo on Wed, 08 April 2015, 15:54:57

Show Image

Something like this with the proper spacing between the F-rows :D

I would love a board with a layout like the one in the picture above.

baldgye · « **Reply #74 on:** Wed, 03 June 2015, 07:29:19 »

Bumping this just to find out if this is going to happen, I did send a pm a while ago but got nothing back

azhdar · « **Reply #75 on:** Wed, 03 June 2015, 09:11:16 »

ahhhhhhhhhhh what have you done baldgye, I had forget this

Unagi · « **Reply #76 on:** Fri, 26 June 2015, 07:11:34 »

Quote from: Sifo on Wed, 08 April 2015, 15:54:57

For the record this has been my dream layout to play StarCraft for years. The only thing I'd like is for a standard right shift option.

Wow you aren't kidding. That layout is ideal.

evolveS · « **Reply #77 on:** Tue, 14 July 2015, 15:27:53 »

Bump, I'd still really like to see this layout/project go forward somehow.

bueller · « **Reply #78 on:** Fri, 04 September 2015, 04:52:01 »

Quote from: evolveS on Tue, 14 July 2015, 15:27:53

Bump, I'd still really like to see this layout/project go forward somehow.

I know man, this is my dream board. Sadly Margo hasn't been on in ages and tons of people are having trouble getting their GON orders fulfilled so I don't like our chances. I'm going to try and add an F-row to the GH60 PCB to accommodate this, just waiting on the final revision PCB files to be released.

Soon™

BunnyLake · « **Reply #79 on:** Fri, 04 September 2015, 05:32:15 »

Quote from: bueller on Fri, 04 September 2015, 04:52:01

Quote from: evolveS on Tue, 14 July 2015, 15:27:53
Bump, I'd still really like to see this layout/project go forward somehow.

I know man, this is my dream board. Sadly Margo hasn't been on in ages and tons of people are having trouble getting their GON orders fulfilled so I don't like our chances. I'm going to try and add an F-row to the GH60 PCB to accommodate this, just waiting on the final revision PCB files to be released.

Soon™

margo is currently in the middle of dealing with some serious life tragedies, one very personal to him, as well as a good friend of his dying in the recent shoreham plane crash, as a result of the former he is currently out of town

i have spoken to him and hes alright just getting things back together and will be back as and when he can

trenzafeeds · « **Reply #80 on:** Fri, 04 September 2015, 06:00:58 »

Tentatively interested, depending on funds. You can put me on the maybe list.

bueller · « **Reply #81 on:** Fri, 04 September 2015, 06:54:44 »

Quote from: BunnyLake on Fri, 04 September 2015, 05:32:15

Quote from: bueller on Fri, 04 September 2015, 04:52:01
Quote from: evolveS on Tue, 14 July 2015, 15:27:53
Bump, I'd still really like to see this layout/project go forward somehow.

I know man, this is my dream board. Sadly Margo hasn't been on in ages and tons of people are having trouble getting their GON orders fulfilled so I don't like our chances. I'm going to try and add an F-row to the GH60 PCB to accommodate this, just waiting on the final revision PCB files to be released.

Soon™

margo is currently in the middle of dealing with some serious life tragedies, one very personal to him, as well as a good friend of his dying in the recent shoreham plane crash, as a result of the former he is currently out of town

i have spoken to him and hes alright just getting things back together and will be back as and when he can

Aw man that's terrible to hear. Send my best.

evolveS · « **Reply #82 on:** Fri, 04 September 2015, 10:00:56 »

Quote from: BunnyLake on Fri, 04 September 2015, 05:32:15

Quote from: bueller on Fri, 04 September 2015, 04:52:01
Quote from: evolveS on Tue, 14 July 2015, 15:27:53
Bump, I'd still really like to see this layout/project go forward somehow.

I know man, this is my dream board. Sadly Margo hasn't been on in ages and tons of people are having trouble getting their GON orders fulfilled so I don't like our chances. I'm going to try and add an F-row to the GH60 PCB to accommodate this, just waiting on the final revision PCB files to be released.

Soon™

margo is currently in the middle of dealing with some serious life tragedies, one very personal to him, as well as a good friend of his dying in the recent shoreham plane crash, as a result of the former he is currently out of town

i have spoken to him and hes alright just getting things back together and will be back as and when he can

My condolences and kindest regards for margo through this troubling time.

News:

Author Topic: [IC] JMargo-70 - [CTRL]ALT & GON (Read 24818 times)