[IC]TGR-Jane CE

[mathiasn]

Will there be an ISO plate this round?

 

Will there be an ISO plate this round?

 

curious about it too.

ISO will be available

I'm in.

[Firebolt1914]

More questions: What color options are available for the plate (if any, trying to go for something similar to corsa), and is there offcenter spacebar support?

[Rodgaroon]

it isn't about to buy or not to buy, it's about what color you will go with.

RIP wallet.

This ^^

Picking up a Miami PBT Set, hoping a nice teal or sky blue color will be available.

Question, I'll have someone assemble the keyboard for me but is there any programming that needs to happen on the TX87 afterwards?

[breitling]

This keyboard is a beauty. Would love to get one!

[ryptide11]

Definitely interested!

[yuktsi]

post updated

[yuktsi]

More questions: What color options are available for the plate (if any, trying to go for something similar to corsa), and is there offcenter spacebar support?

I think I will just stick with red.
do you mean off center for 6.25x spacebar? 

[calmfries]

Dang, I wet my pants again. Y u do dis Yuktsi??!!

[gravenshard]

Interested depending on color options.

[trenzafeeds]

Definitely in on this if my paycheck arrives in time. Looks amazing!

[juahenza]

  one with extra cream and cherries on top please 

[Steezus]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

[hwood34]

Shiiiiiiiit

[trenzafeeds]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Any idea on shipping? Or is that included in the price? I have no problem paying a high price for such a beautiful board.

[romevi]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

Just to clarify the price will be similar to the aprevious group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Any idea on shipping? Or is that included in the price? I have no problem paying a high price for such a beautiful board.

Shipping was $60.

[yuktsi]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

[Steezus]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

I added everything up for mine and ended up being almost $700 without a keyset.

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

Thanks, can't wait to build it!

[yuktsi]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

I added everything up for mine and ended up being almost $700 without a keyset.

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

Thanks, can't wait to build it!

$700???

[romevi]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

I added everything up for mine and ended up being almost $700 without a keyset.

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

Thanks, can't wait to build it!

$700???

Yeah, how'd you get that number?! I paid to send the Zealios, but that was only $25. Did you order any special parts or something?

[Steezus]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

I added everything up for mine and ended up being almost $700 without a keyset.

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

Thanks, can't wait to build it!

$700???

Ended up buying the kit, vintage browns, mx lock, blue and white LEDs, sip sockets, gateron clear tops, diodes, and resistors. Just added it up now, ended up being $669.02 for the board and parts w/o keyset. Ended up being $776.72 including my GMK TA set that I'm planning on putting on it.

[whmeltonjr]

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Shipping and assembly (if you opted for assembly in Malaysia) was $120, and I'm putting Zealios in mine, so that was an extra $66. Total cost for me was just over $600. 

I added everything up for mine and ended up being almost $700 without a keyset.

Just to clarify the price will be similar to the previous group buy which was $420 for the kit(case, pcb, plate). See a lot of new members expressing interest, I don't think that many new members are expecting such a high cost.
Doesn't matter the cost for me, I'm excited for Jane r2. Now I just need to get my r1 in the mail.

Yours will be out next Monday. For sure.

Thanks, can't wait to build it!

$700???

Ended up buying the kit, vintage browns, mx lock, blue and white LEDs, sip sockets, gateron clear tops, diodes, and resistors. Just added it up now, ended up being $669.02 for the board and parts w/o keyset. Ended up being $776.72 including my GMK TA set that I'm planning on putting on it.

I'm going to have to rethink my interest. 

[Photekq]

vintage browns

Which keyboard are they from?

[Steezus]

vintage browns

Which keyboard are they from?

I believe it came from a Cherry MX8100, going to have to double with whom I bought them from. Will report later

[Photekq]

I believe it came from a Cherry MX8100, going to have to double with whom I bought them from. Will report later

Not vintage

[Steezus]

I believe it came from a Cherry MX8100, going to have to double with whom I bought them from. Will report later

Not vintage

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

[Photekq]

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

Still not vintage Marginally better than modern browns. I call them old browns.

[romevi]

Any way we can order extra PCBs and plates from this round for round 1 boards?

And any chance a Jane numpad will accompany this round?!

[ntitco1]

a Jane numpad

One wise word is worth a thousand pieces of gold

[Steezus]

Any way we can order extra PCBs and plates from this round for round 1 boards?

And any chance a Jane numpad will accompany this round?!

A Jane numpad would definitely be awesome, I don't think there would be enough time for it to be in this group buy if expected delivery date is two weeks before Christmas. If so, I hope that there will be one in the future.

[Firebolt1914]

More questions: What color options are available for the plate (if any, trying to go for something similar to corsa), and is there offcenter spacebar support?

I think I will just stick with red.
do you mean off center for 6.25x spacebar?

Yes, I meant off center for 6.25x.

[yuktsi]

More questions: What color options are available for the plate (if any, trying to go for something similar to corsa), and is there offcenter spacebar support?

I think I will just stick with red.
do you mean off center for 6.25x spacebar?

Yes, I meant off center for 6.25x.

Yeah. It is supported

[yuktsi]

Any way we can order extra PCBs and plates from this round for round 1 boards?

And any chance a Jane numpad will accompany this round?!

Any reason why you need an extra PCB and plate? 

As for numpad, I already have the case designed long time ago. Some people may have seen it (before Jane).
But now I feel that the numpad should use my own pcb, so it may still take awhile.

Posted updated: Color options are added. Please comment. Thank you.

[ccc24]

will the same colors as r1 be offered? And does the pcb come pre-soldered?

[nguyenkimtam]

This  will use the same PCB and Plate as the r1 ? That's means we can change the case if we want right ( absolutely if the same layout ) ?

[raymogi]

Woah damn. If only a darker color is available. Been looking for a black/dark grey custom keyboard.

Is it possible to get this assembled as well? I'm a sucker at soldering.

[yuktsi]

This  will use the same PCB and Plate as the r1 ? That's means we can change the case if we want right ( absolutely if the same layout ) ?

same pcb and plate as r1

[azhdar]

Olive green color + ISO, are you trying to kill me?

Waiting on a reply for my pm.

EDIT: weird not to see Titanium, it's such a beautiful color.

[Photekq]

I will probably go for blue grey, although perhaps olive green.

If possible I'd like to be able to purchase more than one plate and PCB. One ISO and one ANSI.

[romevi]

Any way we can order extra PCBs and plates from this round for round 1 boards?

And any chance a Jane numpad will accompany this round?!

Any reason why you need an extra PCB and plate? 

As for numpad, I already have the case designed long time ago. Some people may have seen it (before Jane).
But now I feel that the numpad should use my own pcb, so it may still take awhile.

Posted updated: Color options are added. Please comment. Thank you.

I dunno. Seemed like a good idea at the time.

Also, please work on that numpad!


Edit:
So glad titanium isn't offered this time. Makes me love my r1 even more! Got that Model M industrial look, except more gray.

[nguyenkimtam]

Any way we can order extra PCBs and plates from this round for round 1 boards?

And any chance a Jane numpad will accompany this round?!

Any reason why you need an extra PCB and plate? 

As for numpad, I already have the case designed long time ago. Some people may have seen it (before Jane).
But now I feel that the numpad should use my own pcb, so it may still take awhile.

Posted updated: Color options are added. Please comment. Thank you.

I dunno. Seemed like a good idea at the time.

Also, please work on that numpad!


Edit:
So glad titanium isn't offered this time. Makes me love my r1 even more! Got that Model M industrial look, except more gray.

Yeah , please work on Numpad.
Also the Military color  )

[WhitePlate]

Im interested in a pink one
Edit: Will the pink shade be like this one?
http://i.imgur.com/Akdxrm4.jpg

[nguyenkimtam]

Im interested in a pink one
Edit: Will the pink shade be like this one?
http://i.imgur.com/Akdxrm4.jpg

https://geekhack.org/index.php?topic=73956.300
There is the Jane Pink

[quochung1989]

I still like black color although I had black Jane 

[Steezus]

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

Still not vintage Marginally better than modern browns. I call them old browns.

Got confirmation back that they are indeed true vintage browns harvested from a g80-11801, the person whom I bought them off of also double checked the literal model number on the label. Placement of the logo and springs match up with vintage browns as well. They definitely feel different compared to the few new brown switches I have.

Yuktsi, I remembering you mentioning that there would be something in store for Jane r1 users. Are you still planning on this or changed your mind?

[yuktsi]

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

Still not vintage Marginally better than modern browns. I call them old browns.

Got confirmation back that they are indeed true vintage browns harvested from a g80-11801, the person whom I bought them off of also double checked the literal model number on the label. Placement of the logo and springs match up with vintage browns as well. They definitely feel different compared to the few new brown switches I have.

Yuktsi, I remembering you mentioning that there would be something in store for Jane r1 users. Are you still planning on this or changed your mind?

I am something in mind already. hehe

[demik]

pics of the olive drab green?

OD green is my favorite color. if it's the right tone.. ill be highly tempted.

[bocahgundul]

What color is available right now? Planning on joining this one but don't know what color to get

[HekusuTekusu]

What color is available right now? Planning on joining this one but don't know what color to get

From the OP,


Color options:
Blue grey, Pink, Black(hard anodize) and Olive green(hard anodize) 

[romevi]

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

Still not vintage Marginally better than modern browns. I call them old browns.

Got confirmation back that they are indeed true vintage browns harvested from a g80-11801, the person whom I bought them off of also double checked the literal model number on the label. Placement of the logo and springs match up with vintage browns as well. They definitely feel different compared to the few new brown switches I have.

Yuktsi, I remembering you mentioning that there would be something in store for Jane r1 users. Are you still planning on this or changed your mind?

I am something in mind already. hehe

 

[Steezus]

Oops silly me, I meant to say to mx 11800, I was just checking out an 8100 on ebay and wasn't thinking when I was typing .

Still not vintage Marginally better than modern browns. I call them old browns.

Got confirmation back that they are indeed true vintage browns harvested from a g80-11801, the person whom I bought them off of also double checked the literal model number on the label. Placement of the logo and springs match up with vintage browns as well. They definitely feel different compared to the few new brown switches I have.

Yuktsi, I remembering you mentioning that there would be something in store for Jane r1 users. Are you still planning on this or changed your mind?

I am something in mind already. hehe

 

Wonder what it could be?
I went all out spending on my Jane, definitely planning on keeping it forever. Nothings better than typing on a board you've built yourself.