Looks great, I’m in! Does it use USB Type-C?Pretty sure you are gonna have to solder the cable to the pcb, just like in r1
Looks really good, however this should really be $100 cheaper considering its simple construction/materials. The Rama u80a is the exact same price. :eek:
Looks great, I’m in! Does it use USB Type-C?Pretty sure you are gonna have to solder the cable to the pcb, just like in r1
Will ISO or ANSI be options to? Like in R1. Or is it a universal pcb this round?
I cannot buy 2 sets or add extra pcb?
damn.. I refreshed on the submitted GB page.... Did it go through twice???? :eek: :eek: :eek:
Like the others said, no option for WK or WKL yet, but filled the form regardless.
WKL is my preference tho
There is only one option of layout winkeylesswinkey. Please check again.
Sent from my iPhone using Tapatalk
will shipping address be whatever is currently the paypal address? or is it possible to provide a separate shipping address
will shipping address be whatever is currently the paypal address? or is it possible to provide a separate shipping address
Yes you can specify a shipping address different from your paypal address
Can you show the difference between 1R white and 2R white?
Is there a lot of color difference?
Would you consider adding doing something different for the USB cable? It seems like a lot of people in R1 had a difficult time with soldering the cable to the board.
Would you consider adding doing something different for the USB cable? It seems like a lot of people in R1 had a difficult time with soldering the cable to the board.
Shipping to Australia?
Is this GB really open only for a week - until July 6th?
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?Yes you can.
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?
Nope. With a blocker that isn't possible.
Even -without a blocker- you can only do;
1.5-1-1.5-7-1.5-1.5-1-1-1
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?
Nope. With a blocker that isn't possible.
Even -without a blocker- you can only do;
1.5-1-1.5-7-1.5-1.5-1-1-1
Yes winkey configuration means without blocker.
Hmm, flying1911 above said it is possible. Now I am :confused:
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?
Nope. With a blocker that isn't possible.
Even -without a blocker- you can only do;
1.5-1-1.5-7-1.5-1.5-1-1-1
Yes winkey configuration means without blocker.
Hmm, flying1911 above said it is possible. Now I am :confused:
See picture here;
https://scontent-lga3-1.cdninstagram.com/vp/8d4962e53782873f10aff49c5cecae6a/5DA73588/t51.2885-15/e35/60309371_647362059059982_7103365900098958320_n.jpg?_nc_ht=scontent-lga3-1.cdninstagram.com
Winkey on both sides can't be done on a 65%, left arrow is in the way. UNLESS you swap to 6u spacebar and change it entirely.
If we pick winkey layout, is it possible to have 1.5 1 1.5 7 1.5 1 1.5 bottom row?
Nope. With a blocker that isn't possible.
Even -without a blocker- you can only do;
1.5-1-1.5-7-1.5-1.5-1-1-1
Yes winkey configuration means without blocker.
Hmm, flying1911 above said it is possible. Now I am :confused:
See picture here;
https://scontent-lga3-1.cdninstagram.com/vp/8d4962e53782873f10aff49c5cecae6a/5DA73588/t51.2885-15/e35/60309371_647362059059982_7103365900098958320_n.jpg?_nc_ht=scontent-lga3-1.cdninstagram.com
Winkey on both sides can't be done on a 65%, left arrow is in the way. UNLESS you swap to 6u spacebar and change it entirely.
I think you mistaken this with the JER Mini. This is the J80, a TKL keyboard.
Looks really good, however this should really be $100 cheaper considering its simple construction/materials. The Rama u80a is the exact same price. :eek:The G60 (similar sloped sides also inspired by the G80-3000, only in a 60% form factor) was $300 base, but some colors raised it $36. This uses significantly more material and has an F-row and nav cluster, but no plate or Bluetooth connectivity so $420 really isn't absurd for the volume, but I would like a better PCB.
when can we expect invoices?
Will orders with extra pcb's also be receiving an extra cable?
Will orders with extra pcb's also be receiving an extra cable?
Is EVE still the OEM?
How are we doing? Any update?
Started shipping a couple of days ago.
REMINDER:
If you have any questions, please leave a message on this post, or contact the author directly via email: 303669158@qq.com. PM is not recommended cause I may not be able to check all the messages due to some personal issues.
Show Image(https://i.imgur.com/oEiVST4.png)
from the discord.
Does anyone in this group buy know how to port this PCB to QMK? If not, would anyone in this GB be willing to send their PCB to someone who knows how? We're currently discussing this in the Discord and there might be some cost splitting happening if we can set something up.
Does anyone in this group buy know how to port this PCB to QMK? If not, would anyone in this GB be willing to send their PCB to someone who knows how? We're currently discussing this in the Discord and there might be some cost splitting happening if we can set something up.
We have someone willing to do the porting to QMK. If anyone in the US want to help out by shipping out their (extra) PCB I'll pay for the shipping.
Should have bought one when round 2 was offered. Didn't have any tactiles for it, though.Ergo clears.
With Zealio V1 [and Zilent V1] being out-of-production, I don't know what I'd put in it. Maybe something simple like Aliaz.
Looking for one if anyone wants to give his up. :cool: