Author Topic: Post Your Nubs! (nubbinator caps) (Read 392313 times)

rowdy · « **Reply #800 on:** Sun, 18 October 2015, 02:10:14 »

Quote from: nubbinator on Fri, 16 October 2015, 21:49:51

Quote from: livingspeedbump on Fri, 16 October 2015, 21:20:34
Show Image

I believe it glows in the dark too. Green or blue caps had a good chance of being GID.

Not yellow ones? :p

nubbinator · « **Reply #801 on:** Sun, 18 October 2015, 02:11:43 »

Quote from: rowdy on Sun, 18 October 2015, 02:10:14

Quote from: nubbinator on Fri, 16 October 2015, 21:49:51
Quote from: livingspeedbump on Fri, 16 October 2015, 21:20:34
Show Image

I believe it glows in the dark too. Green or blue caps had a good chance of being GID.

Not yellow ones? :p

I largely stuck with GID colors that matched the color of the cap. I only have blue/green and green GID powder.

rowdy · « **Reply #802 on:** Sun, 18 October 2015, 02:21:19 »

Quote from: nubbinator on Sun, 18 October 2015, 02:11:43

Quote from: rowdy on Sun, 18 October 2015, 02:10:14
Quote from: nubbinator on Fri, 16 October 2015, 21:49:51
Quote from: livingspeedbump on Fri, 16 October 2015, 21:20:34
Show Image

I believe it glows in the dark too. Green or blue caps had a good chance of being GID.

Not yellow ones? :p

I largely stuck with GID colors that matched the color of the cap. I only have blue/green and green GID powder.

Fair enough :)

Actually I don't think I've seen anything that is yellow and GiD.

theteam · « **Reply #803 on:** Sun, 18 October 2015, 05:03:55 »

nice pics people

hope my cap show up soon, been out for delivery since friday morning ;x

trenzafeeds · « **Reply #804 on:** Sun, 18 October 2015, 11:34:45 »

I'm just gonna cross-post this all over the place because it looks so damn good.
Blaze Blue Dolly v2 w/ Wyse Terminal

Jokrik · « **Reply #805 on:** Tue, 20 October 2015, 10:08:01 »

😭 so many nice dollies
Seriously not gonna miss the next sale!

SixtyLife · « **Reply #806 on:** Tue, 20 October 2015, 13:41:40 »

home for my beauties:

damn I love dollies!

mobbo · « **Reply #807 on:** Tue, 20 October 2015, 13:49:42 »

Quote from: ghostjuggernaut on Sat, 17 October 2015, 19:08:49

Finally got around to putting the new caps on my keyboard.

Show Image

Show Image

Definitely my favorite colorway of the V2s that went out. I'm just blown away by how good these look on all your keyboards

trizkut · « **Reply #808 on:** Tue, 20 October 2015, 17:51:20 »

Joey Quinn · « **Reply #809 on:** Tue, 20 October 2015, 17:58:37 »

Quote from: ghostjuggernaut on Sat, 17 October 2015, 13:25:12

Got some siiiiicccccckkkk caps today. A plumsicle Dolly V2 + Fn.

Show Image

Looking phenomenal Nubbs! I haven't had a chance, but the V2 is taking over a CC's spot on my keyboard as soon as I get a chance to swap them out. not sure yet on the FN, but I will definitely put it to use as well.

Nubb's color game is mind blowing, you got some seriously awesome caps.

HoffmanMyster · « **Reply #810 on:** Tue, 20 October 2015, 18:17:26 »

They're so beautiful!!

Dolly V2 by HoffmanMyster, on Flickr

The quality on these is fantastic. I love 'em.

SixtyLife · « **Reply #811 on:** Tue, 20 October 2015, 18:33:04 »

Quote from: HoffmanMyster on Tue, 20 October 2015, 18:17:26

They're so beautiful!!

Show Image

Dolly V2 by HoffmanMyster, on Flickr

The quality on these is fantastic. I love 'em. :-*

whoa.. the cut horns got a hellboy vibe. looks amazing!

Belfong · « **Reply #812 on:** Tue, 20 October 2015, 20:48:01 »

Love the Hellboy look as well! Nubbs should consider this as V2.5 in future, he he!

Joey Quinn · « **Reply #813 on:** Tue, 20 October 2015, 22:00:59 »

Quote from: codingcpa on Tue, 20 October 2015, 18:33:04

Quote from: HoffmanMyster on Tue, 20 October 2015, 18:17:26
They're so beautiful!!

Show Image

Dolly V2 by HoffmanMyster, on Flickr

The quality on these is fantastic. I love 'em. :-*
whoa.. the cut horns got a hellboy vibe. looks amazing!

:))

I said the same thing in the what did you get in the mail today thread. Now I look here and realize I was a bit late to the party.

HoffmanMyster · « **Reply #814 on:** Tue, 20 October 2015, 22:58:21 »

My Dolly V2 found a new home.

Duck Viper by HoffmanMyster, on Flickr

nubbinator · « **Reply #815 on:** Tue, 20 October 2015, 23:04:43 »

Quote from: HoffmanMyster on Tue, 20 October 2015, 22:58:21

My Dolly V2 found a new home.

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

I really like how that looks. I held it up to my CMYK set before sending it out thinking that it would look good with it and you confirmed it.

HoffmanMyster · « **Reply #816 on:** Tue, 20 October 2015, 23:11:35 »

Quote from: nubbinator on Tue, 20 October 2015, 23:04:43

Quote from: HoffmanMyster on Tue, 20 October 2015, 22:58:21
My Dolly V2 found a new home.

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

I really like how that looks. I held it up to my CMYK set before sending it out thinking that it would look good with it and you confirmed it.

It is sooooo good. Easily one of my favorite artisan/keyset pairings. And it's such a cool cap on top of it. xD

SixtyLife · « **Reply #817 on:** Tue, 20 October 2015, 23:45:22 »

Quote from: Joey Quinn on Tue, 20 October 2015, 22:00:59

I said the same thing in the what did you get in the mail today thread. Now I look here and realize I was a bit late to the party.

whoa.. great minds?

Quote from: HoffmanMyster on Tue, 20 October 2015, 22:58:21

My Dolly V2 found a new home.

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

Show Image

Duck Viper by HoffmanMyster, on Flickr

what an absolutely perfect match. looks like it went to the right home.

tigersharkdude · « **Reply #818 on:** Wed, 21 October 2015, 11:16:02 »

I TOTALLY want a de-horned dolly in all red ......

theteam · « **Reply #819 on:** Wed, 21 October 2015, 13:02:31 »

mobbo · « **Reply #820 on:** Wed, 21 October 2015, 13:48:35 »

Quote from: HoffmanMyster on Tue, 20 October 2015, 18:17:26

They're so beautiful!!

Show Image

Dolly V2 by HoffmanMyster, on Flickr

The quality on these is fantastic. I love 'em. :-*

Be careful....you're going to give people bad ideas with those filed horns :))

Belfong · « **Reply #821 on:** Thu, 22 October 2015, 05:31:49 »

Jokrik · « **Reply #822 on:** Thu, 22 October 2015, 06:09:26 »

Quote from: Belfong on Thu, 22 October 2015, 05:31:49

Show Image

Show Image

Show Image

The combo is working well

Arghhh I'm pulling my hairs out, how could I miss the sale

Reigning Hell · « **Reply #823 on:** Thu, 22 October 2015, 21:04:47 »

anyone else's v2 have a janky stem? My ballpoint blue dolly is very loose on the stem, falls off if i turn my KB upside down. I'm just using regular cherry MX stems

nubbinator · « **Reply #824 on:** Thu, 22 October 2015, 21:17:44 »

Quote from: Reigning Hell on Thu, 22 October 2015, 21:04:47

anyone else's v2 have a janky stem? My ballpoint blue dolly is very loose on the stem, falls off if i turn my KB upside down. I'm just using regular cherry MX stems

What switch type is it? I tested them all on an MX Black and Gateron and none of them had issues when I tried them. In fact, some of the Dollies were almost too tight. I can tell you that if it is an issue, a dab of glue or paint in the stem should tighten it up. I'm just surprised since I remember testing them all and the Dollies being fine.

Reigning Hell · « **Reply #825 on:** Thu, 22 October 2015, 21:30:21 »

MX browns.
yeah idk why its happening, because it wasn't like this when i first put it on. The Fn key is tight enough for it stay on the stem, but i can easily pull it off without a tool or any pressure; i assume that to be just how the cap is tho

nubbinator · « **Reply #826 on:** Thu, 22 October 2015, 21:54:31 »

Hit me up abd I'll try to get something worked out for you since that shouldn't be an issue.

linkshine · « **Reply #827 on:** Fri, 23 October 2015, 15:04:53 »

Quote from: nubbinator on Thu, 22 October 2015, 21:54:31

Hit me up abd I'll try to get something worked out for you since that shouldn't be an issue.

Nubb has a customer with this issue on a $20 cap: works towards a resolution and shows a desire to make him happy.
Girldc has a customer with this issue on 2 seperate $100 caps: doesn't really give a ****. :/
Props to you for caring Nubbs.

nubbinator · « **Reply #828 on:** Fri, 23 October 2015, 15:44:44 »

It was actually a $10 cap.

linkshine · « **Reply #829 on:** Fri, 23 October 2015, 15:52:47 »

Quote from: nubbinator on Fri, 23 October 2015, 15:44:44

It was actually a $10 cap.

tigersharkdude · « **Reply #830 on:** Fri, 23 October 2015, 16:51:02 »

im so pissed i missed this sale.

Brain, y u no remember date?

Belfong · « **Reply #831 on:** Fri, 23 October 2015, 21:46:47 »

I am liking Dolly V2 a lot more. Putting V2 side by side to V1 made the V1 face so small and miniscule. LOL. The V1 still have a more fun look though and by itself, she stood up quite well.

Nubbs, the V2 on a 60% board - the key tend to rub on the key below it e.g. if I put it on the Esc, it rubs against the Tab. Hopefully you can scale it down slightly for future version.

nubbinator · « **Reply #832 on:** Fri, 23 October 2015, 21:53:59 »

Quote from: Belfong on Fri, 23 October 2015, 21:46:47

I am liking Dolly V2 a lot more. Putting V2 side by side to V1 made the V1 face so small and miniscule. LOL. The V1 still have a more fun look though and by itself, she stood up quite well.

Nubbs, the V2 on a 60% board - the key tend to rub on the key below it e.g. if I put it on the Esc, it rubs against the Tab. Hopefully you can scale it down slightly for future version.

Great to hear! I had a lot of fun making the V2. Definitely something different for me.

And thanks for letting me know. I can try to adjust the master a little, but we'll see what I can do. I didn't notice any rubbing on my boards I tried it on, but that's why getting input is always good.

livingspeedbump · « **Reply #833 on:** Fri, 23 October 2015, 23:06:15 »

The Dolly V1 was one of the first artisans I really, really liked the look of. Totally different in design and colors. The V2 is just as good, seeing the progression of detail is incredible too.

rowdy · « **Reply #834 on:** Sat, 24 October 2015, 21:32:19 »

I love the profile on this

mobbo · « **Reply #835 on:** Mon, 26 October 2015, 19:59:51 »

Was fortunate enough to snag this Champagne Fn Key. One of my first artisans ever!

nubbinator · « **Reply #836 on:** Mon, 26 October 2015, 20:26:44 »

The adventuring into other stems continues. The mold needs some redoing or some figuring out, their may be some parts that need thickening, and I can't speak of the longevity of it yet, but I'm happy with how things are looking. A successful 3D printed BS stem that fits with the modular system I made.

Here's the first protocast:

Quote from: mobbo on Mon, 26 October 2015, 19:59:51

Was fortunate enough to snag this Champagne Fn Key. One of my first artisans ever!

Show Image

Show Image

I really like that second shot.

raymogi · « **Reply #837 on:** Mon, 26 October 2015, 20:30:51 »

Oh gawd. Dolly v2 in BS goodness... I don't know what to say.

rm-rf · « **Reply #838 on:** Mon, 26 October 2015, 20:32:57 »

Quote from: nubbinator on Mon, 26 October 2015, 20:26:44

The adventuring into other stems continues. The mold needs some redoing or some figuring out, their may be some parts that need thickening, and I can't speak of the longevity of it yet, but I'm happy with how things are looking. A successful 3D printed BS stem that fits with the modular system I made.

Here's the first protocast:

Show Image

Show Image

Quote from: mobbo on Mon, 26 October 2015, 19:59:51
Was fortunate enough to snag this Champagne Fn Key. One of my first artisans ever!

Show Image

Show Image

I really like that second shot.

very nice! looking forward for a chance to get a Nub BS key!

nubbinator · « **Reply #839 on:** Mon, 26 October 2015, 20:33:56 »

Quote from: raymogi on Mon, 26 October 2015, 20:30:51

Oh gawd. Dolly v2 in BS goodness... I don't know what to say.

MX (and Novatouch compatible), Topre, Alps, and BS are all planned. I could probably even do a Romer G Dolly, but I'm not sure how the stem would hold up. I'm sure there will need to be some kinks worked out on the BS since it's a 3D printed stem, but hopefully it will be good to go pretty quickly.

I should also add that the BS Dollies will be 5 shots. I have to do it that way to reduce seconds and confirm that they'll work.

raymogi · « **Reply #840 on:** Mon, 26 October 2015, 20:34:49 »

Quote from: nubbinator on Mon, 26 October 2015, 20:33:56

Quote from: raymogi on Mon, 26 October 2015, 20:30:51
Oh gawd. Dolly v2 in BS goodness... I don't know what to say.

MX (and Novatouch compatible), Topre, Alps, and BS are all planned. I could probably even do a Romer G Dolly, but I'm not sure how the stem would hold up.

Dreams do come true I guess. You do a Romer G Dolly, I'll buy that damn Logitech board right away

mobbo · « **Reply #841 on:** Mon, 26 October 2015, 20:36:10 »

Quote from: nubbinator on Mon, 26 October 2015, 20:26:44

Quote from: mobbo on Mon, 26 October 2015, 19:59:51
Was fortunate enough to snag this Champagne Fn Key. One of my first artisans ever!

Show Image

Show Image

I really like that second shot.

I'm glad you like it! Thanks so much for the cap man, and the heart palpitations from my very first "first-come first-served" sale

rowdy · « **Reply #842 on:** Wed, 28 October 2015, 04:27:31 »

Quote from: nubbinator on Mon, 26 October 2015, 20:26:44

The adventuring into other stems continues. The mold needs some redoing or some figuring out, their may be some parts that need thickening, and I can't speak of the longevity of it yet, but I'm happy with how things are looking. A successful 3D printed BS stem that fits with the modular system I made.

Here's the first protocast:

Show Image

Show Image

Quote from: mobbo on Mon, 26 October 2015, 19:59:51
Was fortunate enough to snag this Champagne Fn Key. One of my first artisans ever!

Show Image

Show Image

I really like that second shot.

Those stems look super clean!

3D printing has definitely come a long way since the last time I had anything to do with it.

nubbinator · « **Reply #843 on:** Wed, 28 October 2015, 08:41:06 »

You can still tell it's printed, but yeah, they have come a long way. The stem has more flex to it than I like, so I'm trying some more adjustments to make it thicker yet still functional. If that doesn't work, there are some other ideas I have.

rowdy · « **Reply #844 on:** Wed, 28 October 2015, 20:58:42 »

Quote from: nubbinator on Wed, 28 October 2015, 08:41:06

You can still tell it's printed, but yeah, they have come a long way. The stem has more flex to it than I like, so I'm trying some more adjustments to make it thicker yet still functional. If that doesn't work, there are some other ideas I have.

Could you make just the top part, and mate it with a standard IBM stem?

nubbinator · « **Reply #845 on:** Wed, 28 October 2015, 21:10:05 »

Quote from: rowdy on Wed, 28 October 2015, 20:58:42

Quote from: nubbinator on Wed, 28 October 2015, 08:41:06
You can still tell it's printed, but yeah, they have come a long way. The stem has more flex to it than I like, so I'm trying some more adjustments to make it thicker yet still functional. If that doesn't work, there are some other ideas I have.

Could you make just the top part, and mate it with a standard IBM stem?

Probably not, but I'm trying some things first that should take care of the issues.

SixtyLife · « **Reply #846 on:** Mon, 30 November 2015, 21:26:26 »

sorry for potato. love these dollies!!!

linkshine · « **Reply #847 on:** Tue, 01 December 2015, 11:46:19 »

hnnnnnnnnng dolly v1. Some day dolly. Some day. I LOVE your setup Coding!

HoffmanMyster · « **Reply #848 on:** Tue, 01 December 2015, 14:15:43 »

Quote from: codingcpa on Mon, 30 November 2015, 21:26:26

sorry for potato. love these dollies!!!
Show Image

Whoa, so many Dollies. :D

MrRooks · « **Reply #849 on:** Thu, 03 December 2015, 16:16:16 »

My first Nub! I didn't see this one being repped in here by the previous owner so here it is.

News:

Author Topic: Post Your Nubs! (nubbinator caps) (Read 392313 times)