Good luck to everyone!
By the way, on the form you have address (if different from PayPal) set as required, shouldn't this be optional?
Sent from my iPhone using Tapatalk
Wish you could pick your plate up front and not have to buy aluminum by default.
Plates:Doesn't the countdown timer show that there are 17 hours left?
We're going with the default set as that's the most straightforward way for the factory to provide us with a lower price at our MOQ since we're having a rather low one.
Raffle:
About 6 hours + to go, we're having quite a few participants so final call :)
Sent from my iPhone using Tapatalk
Plates:Doesn't the countdown timer show that there are 17 hours left?
We're going with the default set as that's the most straightforward way for the factory to provide us with a lower price at our MOQ since we're having a rather low one.
Raffle:
About 6 hours + to go, we're having quite a few participants so final call :)
Sent from my iPhone using Tapatalk
Sent from my SM-N950U1 using Tapatalk
Got it so there should be a little bit less than 4 hours left?Plates:Doesn't the countdown timer show that there are 17 hours left?
We're going with the default set as that's the most straightforward way for the factory to provide us with a lower price at our MOQ since we're having a rather low one.
Raffle:
About 6 hours + to go, we're having quite a few participants so final call :)
Sent from my iPhone using Tapatalk
Sent from my SM-N950U1 using Tapatalk
Noticed that too. When it started it had the raffle bring open for 36 hours I think instead of 24. It ended at noon Singapore instead of midnight.
Is the 6th picture down in the additional pictures the black or silver? (Looks kinda grey) thanksI think that is the raw alu, before ano.
Sent from my iPhone using Tapatalk
Stats?Dude, let the man sleep, it’s 12:00 AM in Singapore :rolleyes:
I got one!!! I chose silver color as I think the angles will be more visible, but also black or red seems soooo nice! Opinions??? Thx
Sent from my iPhone using Tapatalk
Got one!Just curious if I can add additional order of polycarbonate plate, I did not remember seeing the option of it in GB form? Or maybe I just forgot
Someone dropped out so I reraffled based on the 5 names and E3E is the next lucky winner :thumb:
On order checking:
I'll open order checking for another 11-12 hours, after which I will assume that it's finalised and no other additions/changes will be allowed.
Congrats winners! I didn't get in the KIRA60, but I did get in another GB so I can't be too salty :)
Invoice received and paid. First time GBing here, do I need to reply in the thread whenever I pay?
Invoice received and paid. First time GBing here, do I need to reply in the thread whenever I pay?
No.
On Purple:
Also, some people have asked about the purple shade used. Unfortunately samples are still on their way, but it'll probably look something similar (NOT EXACT) to this shade.Show Image(https://i.imgur.com/BgVg4Qa.png)
Thanks to the 3 who have paid so far. Up till this stage we still have 1 cancellation after the re raffle. I'm gonna raffle again when I wake up since it's close to 2am here.
I'll make note of those who cancel in the context of future GBs. For the rest who wanted it, one more chance for you tomorrow!
Sent from my iPhone using Tapatalk
Thanks to the 3 who have paid so far. Up till this stage we still have 1 cancellation after the re raffle. I'm gonna raffle again when I wake up since it's close to 2am here.
I'll make note of those who cancel in the context of future GBs. For the rest who wanted it, one more chance for you tomorrow!
Sent from my iPhone using Tapatalk
Wooohooo!
We're all paid up! I'll proceed to send in our orders, updates will come along the way :)
Though the GB had ended, I suddenly have a question about the brass plate and the PC plate.
Curious how would be the finish on brass plate, would there be any polishing on it, or even fancy PVD coating on it, or it would looks more like what we saw in the sample picture. Also, how thick would be PC plate be, hoping it could be thicker ones, like 3mm, though I never tried PC plate before and knowing how it feels on 1.5mm thickness is also something great to know.
Though the GB had ended, I suddenly have a question about the brass plate and the PC plate.
Curious how would be the finish on brass plate, would there be any polishing on it, or even fancy PVD coating on it, or it would looks more like what we saw in the sample picture. Also, how thick would be PC plate be, hoping it could be thicker ones, like 3mm, though I never tried PC plate before and knowing how it feels on 1.5mm thickness is also something great to know.
I'll get back to you on the PC plate.
As for the brass plate it'll be matte, not PVD.
Last i checked it'll be sealed with something to make it matte, but let me check on this again on Monday :thumb:
What pcb’s does the plate support? GH60, DZ60, Zeal60 etc? Thanks
PCBs that follow the Poker screw layout will work, so that includes bface, GH60 etc.
Hi quick question, is the brass plate coated with anything? Oh and may we get a quick update?
Hi quick question, is the brass plate coated with anything? Oh and may we get a quick update?
Brass plate is matte, production is underway so we don't have much to update as of now.
Hi quick question, is the brass plate coated with anything? Oh and may we get a quick update?
Brass plate is matte, production is underway so we don't have much to update as of now.
So I'm taking that as uncoated brass with a matte finish, thanks for the update.
Anyone experienced with coating brass plates? The place I'm going to move to is really humid all year round and I'll be living right next to the sea (salty sea wind) so the plate is going to corrode really quickly.
Hi quick question, is the brass plate coated with anything? Oh and may we get a quick update?
Brass plate is matte, production is underway so we don't have much to update as of now.
So I'm taking that as uncoated brass with a matte finish, thanks for the update.
Anyone experienced with coating brass plates? The place I'm going to move to is really humid all year round and I'll be living right next to the sea (salty sea wind) so the plate is going to corrode really quickly.
Yes, uncoated brass plate. You might wanna approach some of the shops in your area? They can probably coat it for you.
Yasssss!!!Show Image(https://uploads.tapatalk-cdn.com/20171225/52bf42807bfc995fc1c91f0aa3ce853f.jpg)
Machining for all parts almost done!
Merry Christmas folks.
Man I should have snagged an extra brass plate with mine... Thanks for the update dude and merry Christmas!
Sent from my Pixel 2 XL using Tapatalk
Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
Oh sorry, I meant just the manufacturing.Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
ooooo
Those look nice
When you say "everything finished" are you referring to just manufacturing? Or the GB itself? Like your goal is to have everything shipped by then? No worries either way, just currious :P.
Oh sorry, I meant just the manufacturing.Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
ooooo
Those look nice
When you say "everything finished" are you referring to just manufacturing? Or the GB itself? Like your goal is to have everything shipped by then? No worries either way, just currious :P.
Sent from my MI 5 using Tapatalk
Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
That purple is gorgeous! So glad I went with it!
By the way...are there by chance any extra polycarbonate plates? If so I would gladly buy one! :)
Here's a sample done for the purple, we're hoping everything to be finished before Chinese New Year.Show Image(https://uploads.tapatalk-cdn.com/20180112/3d5d995edc8e82610cd20119b495ed78.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180112/6b017fdb443c4da87661a0c89fcbeb44.jpg)
Sent from my MI 5 using Tapatalk
That purple is gorgeous! So glad I went with it!
By the way...are there by chance any extra polycarbonate plates? If so I would gladly buy one! :)
I might have an extra...once it arrives I'll post and stuff, lemme know then.
Show Image(https://uploads.tapatalk-cdn.com/20180129/a77c7324c8eefc4d1b702594abc95d53.jpg)
Emails will be sent out within the next 48 hours for all participants. We're close to the conclusion of this GB!
Show Image(https://uploads.tapatalk-cdn.com/20180129/a77c7324c8eefc4d1b702594abc95d53.jpg)
Emails will be sent out within the next 48 hours for all participants. We're close to the conclusion of this GB!
Ayy looking forward to it. Nice job on the buy so far dude.Show Image(https://uploads.tapatalk-cdn.com/20180129/a77c7324c8eefc4d1b702594abc95d53.jpg)
Emails will be sent out within the next 48 hours for all participants. We're close to the conclusion of this GB!
Anyone interested in selling or trading (for 9009 extras maybe :p) theirs? I would be especially interested in a black one, figured it was worth a shot :)
Anyone interested in selling or trading (for 9009 extras maybe :p) theirs? I would be especially interested in a black one, figured it was worth a shot :)
I have a red one with red plate. Willing to let go exactly how much I paid for. Since shipping is accounted for later, it is easier to transfer slot.
Ooh I got an offer for a silver one, but red + GMK Honeywell looks sick Think I might prefer redAnyone interested in selling or trading (for 9009 extras maybe ) theirs? I would be especially interested in a black one, figured it was worth a shot
I have a red one with red plate. Willing to let go exactly how much I paid for. Since shipping is accounted for later, it is easier to transfer slot.
I haven't received the email yet, anyone else? I moved to another country recently, who do I contact to change my shipping address?Emails haven't been sent out yet, but you should contact beamingrobot regarding a change of address.
I don't know why but I did not receive any email within the 48 hr time frame.
I don't know why but I did not receive any email within the 48 hr time frame.
He's in a different timezone :D
For the following people, would appreciate a reply soon :)
1. IneffableTao
2. Afrokobe
3. W4neWang
4. joedubstep
5. trente
6. Lee Jung Woo
7. Hongguchaego
Sent from my iPhone using Tapatalk
For the following people, would appreciate a reply soon :)Ofc the Dallas guys slacking...
1. IneffableTao
2. Afrokobe
3. W4neWang
4. joedubstep
5. trente
6. Lee Jung Woo
7. Hongguchaego
Sent from my iPhone using Tapatalk
By the way, if any of you have trouble paying, just give it a bit of time and try again. Shopify might be having some problems or something.I had trouble getting it to work with my debit card. Used a credit card and it worked fine. Thanks!
Sent from my iPhone using Tapatalk
Thanks for paying so quickly guys, we've just sent off a few packages so you should be receiving a tracking number in the next day or two for those who paid earlier. Shipping is via DHL Express so it should be really quick.Do we get our tracking number directly from you or through a third party? I have received a couple of shipping notices this weekend but I'm not sure which one is which.
We still have a few shipping invoices unpaid, again we won't be able to ship starting on Thurs for a week as it's also CNY hols here in SEA :)
Also, if anyone is a friend of Lee Jung Woo, please reach out to us. Dude has not replied to any of our messages.
Will there be a R2?
There are no plans for round 2, and no extras for sale after the GB has ended.
Thanks for paying so quickly guys, we've just sent off a few packages so you should be receiving a tracking number in the next day or two for those who paid earlier. Shipping is via DHL Express so it should be really quick.Do we get our tracking number directly from you or through a third party? I have received a couple of shipping notices this weekend but I'm not sure which one is which.
We still have a few shipping invoices unpaid, again we won't be able to ship starting on Thurs for a week as it's also CNY hols here in SEA :)
Also, if anyone is a friend of Lee Jung Woo, please reach out to us. Dude has not replied to any of our messages.
Sent from my iPhone using Tapatalk
Mine just showed up. Will take some proper photos later but the kit looks really nice with no issues. Thanks robotShow Image(https://uploads.tapatalk-cdn.com/20180215/d499555b883554a7b6d6185dea716d9c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180215/6a87e0ec61744ec3f85a53bb93fdcf9e.jpg)
Sent from my Pixel 2 XL using Tapatalk
Purple is so gud. It's so dark it looks black in some light, with a flash it's lighter than my klippe, but in most light its clearly darker. It's excellent :DShow Image(https://i.imgur.com/WSOU800.jpg)Show Image(https://i.imgur.com/syA5uLO.jpg)Show Image(https://i.imgur.com/ViHJNWP.jpg)Show Image(https://i.imgur.com/RzV74Qg.jpg)Show Image(https://i.imgur.com/ynrwrEr.jpg)
It's also a fatboi. Weighs more than E6 (without brass midcase) or Klippe by a good bit.
Finish is perfect. I am quite happy with it :D
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).M3, 6mm
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).
The screws for the weight should be M3*5 (IIRC), and M2 for the PCB.
Also, what kinda screws are the ones that were included in the bag? Mine only had 5, but they look like they would work really well and are longer than other screws I have. I figure its cheaper/easier for me to just order more of them rather than get a single screw sent out (though you can totally do that too).
The screws for the weight should be M3*5 (IIRC), and M2 for the PCB.
(this is the standard for most cases, in case anyone was looking for screws for a different case)
Anyway, I don't really care about the missing screw, I just wanna order a box/bag of screws like these. So if anyone could tell me what they are called I would appreciate it :D.
Anyway, I don't really care about the missing screw, I just wanna order a box/bag of screws like these. So if anyone could tell me what they are called I would appreciate it :D.
m2x6 hex cap screw
Just finished building this one. Nothing special, just did it to take some photos.
(Attachment Link)
is it just me, or are the plates like STUPID good too? Especially the brass one its even heavier than any of my other brass plates, and the notches are so clean.
She’s beautiful I couldn’t be happierShow Image(https://uploads.tapatalk-cdn.com/20180223/051718415b05f0b5817dd58e25b2fb0f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180223/ee8696bd094c3c73821413fba2e760b4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180223/ef4e90fb3b6af9360fdbe56c9737ec55.jpg)
She’s beautiful I couldn’t be happierShow Image(https://uploads.tapatalk-cdn.com/20180223/051718415b05f0b5817dd58e25b2fb0f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180223/ee8696bd094c3c73821413fba2e760b4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180223/ef4e90fb3b6af9360fdbe56c9737ec55.jpg)
Finally had some time to build mine, happy that we got everyone's boards out :thumb:I hope I would have a case in this kind of bluish grey color one day. :p
Cherry Silents in Zeal housings :DShow Image(https://i.imgur.com/Cdoavgq.jpg)Show Image(https://i.imgur.com/gl068mT.jpg)Show Image(https://i.imgur.com/0vQxUJI.jpg)
more photos here. (https://imgur.com/a/AQA5G)
some one sell me a green one of these there beautiful.
some one sell me a green one of these there beautiful.
Don’t think that color was a part of the gb, green might be a one off