[IC] EV65 - Render update

[MaiTheSan]

Hello, This is my first time I post something in Geekhack and hopefully, my ideal is not duplicate ~ (sorry for my english :3)
 What do you think about this?
Case: 5 Degree







Layout

Thank you~

Maybe i'll add nametag in prototype :3 hope you enjoy it.

#update
And that all the part my keyboard :3

##Update
Added WKL layout

Preview~

[Prototype soon]

[6.5 degree preview]


If you like it, support me by putting this in your forum signature! ♥

Code: [Select]

[url=https://geekhack.org/index.php?topic=105898.0][img]https://sanpj.tonikaku.photos/i/kqct.png[/img][/url]

[eniigma]

I really like the look of it. That is quite an interesting engraving, although it doesn't seem centered, which is odd. You should center it in relation to the surface that contacts the ground, not the board itself. Bumpon cutouts seem too close to the brass accents, and some more mounting info would be nice. Good luck! 

[CrazyAssMonkey]

I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? 

[Ultimatum]

I’m in.

[Lil]

I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? 

Enligma means it is not vertically centred if the bottom of the board was completely facing the viewer

[CrazyAssMonkey]

I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? 

Enligma means it is not vertically centred if the bottom of the board was completely facing the viewer

Ahhhhh, I was thinking it might have been that but I do like that positioning. I was thinking he had seen some sort of sideways offset that I couldn't see.

[IOVERCALLHISTIOCYTES]

Seems like an elaborate setup for ligma

I like the board

[MaiTheSan]

okey, thanks all and i fixed pumpon cutouts
https://media.discordapp.net/attachments/696620647891337269/702813083050967062/unknown.png
And that all the part my keyboard :3
https://media.discordapp.net/attachments/696620647891337269/702812591948300288/unknown.png

[tofulo]

Looks very cool. Would like a better look at the engraving

[lz2019]

Simply beautiful! I like it not feeling too simple or too bulky while not having that many decorations at the same time.
Yes, please.

[MaiTheSan]

Simply beautiful! I like it not feeling too simple or too bulky while not having that many decorations at the same time.
Yes, please.

Thank you~~

[CrazyAssMonkey]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

[yuuS0cut3]

I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? 

I assume this is sandwich mount.

[yuuS0cut3]

Pm me if you need support. I can help you with posting since we are compatriot  )

[CrazyAssMonkey]

I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? 

I assume this is sandwich mount.

It looks that way true, I'm not really picky on mounting system. It is all about the noise and aesthetic for me. 

Edit: Tbh just aesthetic lol. I always wear headphones.

[MaiTheSan]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

[MaiTheSan]

Pm me if you need support. I can help you with posting since we are compatriot  )

Of Course =)))

[fabijolo]

I realize the nice and "stealthy" vibes this board gives me 

[Rejeckted]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

[MaiTheSan]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

like this??? :V

[CrazyAssMonkey]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

Show Image

like this??? :V

Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.

[MaiTheSan]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

Show Image

like this??? :V

Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.

Hmmm, i'll try :v, that's amazing :3

[CrazyAssMonkey]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

Show Image

like this??? :V

Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.

Hmmm, i'll try :v, that's amazing :3

I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome.  :thumb:

[MaiTheSan]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

Show Image

like this??? :V

Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.

Hmmm, i'll try :v, that's amazing :3

I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome.  :thumb:

Blue, Dark Blue or Cyan?? :3

[CrazyAssMonkey]

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

I know it's played out but that dark purple render makes me want an EVA-01 scheme

Show Image

like this??? :V

Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.

Hmmm, i'll try :v, that's amazing :3

I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome.  :thumb:

Blue, Dark Blue or Cyan?? :3

Well I was thinking something that might match GMK Classic blue or Masterpiece. But it hit me what would you think about a dark green like PBT GRÆN with brass?


Sent from my iPhone using Tapatalk

[Romutulus]

A fan of this design. White with gold/black weights would look pretty classy just saying. That said if I personally would like to see an orange and white combination.

[MaiTheSan]

A fan of this design. White with gold/black weights would look pretty classy just saying. That said if I personally would like to see an orange and white combination.

hmmm, i think i'll try orange if i can anode this color :3

[jjoejimmy]

New renders look awesome! Looking forward to seeing the actual prototype

[CrazyAssMonkey]

Yes!!! That looks awesome. I quite like the WKL option you mocked up.


Sent from my iPhone using Tapatalk

[Romutulus]

New renders look good. The edges look like it could hurt someone sharp though. I assume they would be rounded out in the actual product?

[RedBeardDog]

Looks awesome.
But 5 degrees... :-(

[lys.nordique]

5 degrees and it looks pretty thick, what is the front height?

[Vaudevi77ain]

Interested. Any estimate on a price?

Count me in if it's hotswap that also comes in rose gold

[RedBeardDog]

Interested. Any estimate on a price?

Count me in if it's hotswap that also comes in rose gold

Yea. Hotswap would be nice

[xEP]

The front looks a little thick.

[MaiTheSan]

Looks awesome.
But 5 degrees... :-(

but why??

[MaiTheSan]

Interested. Any estimate on a price?

Count me in if it's hotswap that also comes in rose gold

hmmm
but I don't know how to draw hotswap

[RedBeardDog]

Interested. Any estimate on a price?

Count me in if it's hotswap that also comes in rose gold

hmmm
but I don't know how to draw hotswap

Too flat. But it’s just my opinion.

[Vireca]

I dont know why but I feel the name remind me other keyboard
I like the design, maybe 6° will atract more people. Also, idk what to think about the little brass weight on the bottom, that just increase the price and I dont think it make much difference. Whats the mount system?

[MaiTheSan]

I dont know why but I feel the name remind me other keyboard
I like the design, maybe 6° will atract more people. Also, idk what to think about the little brass weight on the bottom, that just increase the price and I dont think it make much difference. Whats the mount system?

i think it top mount <(")

[SoraNoTenshi]

Interesting! Looks good to me

One thing: I personally prefer the USB being in the middle, I don't know if you like it that way too, so you have to decide it.
But it does look very nice, looking forward to see the protos of it in the future!

[MadeByMuscles]

Love the look and placement of the weights!

[MaiTheSan]

Interesting! Looks good to me

One thing: I personally prefer the USB being in the middle, I don't know if you like it that way too, so you have to decide it.
But it does look very nice, looking forward to see the protos of it in the future!

It so hard because I draw my pcb from Voyager65 by AI03 :>

[CrazyAssMonkey]

Is that top right blocker in the wkl version a possible addition? I like the way it looks.

[MaiTheSan]

Is that top right blocker in the wkl version a possible addition? I like the way it looks.

Hmmm, i like WKL so i'll add it :>

[CrazyAssMonkey]

Is that top right blocker in the wkl version a possible addition? I like the way it looks.

Hmmm, i like WKL so i'll add it :>

Show Image

Awesome but also what about that top right blocker that removes that key?


Sent from my iPhone using Tapatalk

[MaiTheSan]

Is that top right blocker in the wkl version a possible addition? I like the way it looks.

Hmmm, i like WKL so i'll add it :>

Show Image

Awesome but also what about that top right blocker that removes that key?


Sent from my iPhone using Tapatalk

maybe... no? XD

[CrazyAssMonkey]

Is that top right blocker in the wkl version a possible addition? I like the way it looks.

Hmmm, i like WKL so i'll add it :>

Show Image

Awesome but also what about that top right blocker that removes that key?


Sent from my iPhone using Tapatalk

maybe... no? XD

Jajajajaja alright.
I like the board regardless and I am definitely excited to see what the prototype looks like.  :thumb:

[reaLFX]

Not bad at all! hot swap option? Interested

[MaiTheSan]

Not bad at all! hot swap option? Interested

Maybe~~

[Oddstag]

Rounded corners instead of chamfered and a gasket mount would lock this in as a must-buy for me, but those are obviously major design changes and you've got a vision I'm sure. Great looking in any case.

[ufomer]

Looks great! I'd love to see some more color options though

Sent from my SM-G950F using Tapatalk

[MaiTheSan]

Rounded corners instead of chamfered and a gasket mount would lock this in as a must-buy for me, but those are obviously major design changes and you've got a vision I'm sure. Great looking in any case.

This is my first time i design keyboard so i'm worry about gasket mount because i don't have any exp for this. Maybe in next project, i'll make gasket mount  :3
Thank you~~

[Antvn84]

my opinion, compact size then should has bluetooth version 

[maharuto]

very nice design. I dig the current available color options as well.

looking forward to the proto update!

[ligongduck]

I'm in!

[darkspada]

really digging this design... would love to buy it when gb happens

[idolindisguise]

Lesgo tAke my money , aany discord for this?

[CustomerSupport]

Really like the design as well! Would be interested to hear about more color options and pricing

[Zealzy]

Can you try black on white and white on black  ?

[JoltFX]

The color options has me hyped... I wanna see what’s possible

[husnulhamidiah]

how thick is the plate?

[ever9415]

This is a really nice keyboard.
If GB starts, I want to participate.

[Healspam]

Love the example colourway / colour scheme
Would love to see this come to life and make it's way to my desk!

[Araset]

Looks really cool, looking forward to see some prototypes. Following for the GB!

[EMC Labs]

Could we get more information on the board? Materials for the chassis, weight and plate?

[monophonik]

Love the full length weights. I'm in!

[bvd86]

Im in!  )

[ever9415]

Don't you have any good news?
I'm waiting.

[3yatt]

any chance you could do rounded corners?

I also agree with making the weight cutout centered

[One4All]

Im In! Ill be waiting on Updates 

[chowder101]

Yo!!!! This looks banging. I would be very interested in buying this.

[CaoCao]

I'm in!

[MaiTheSan]

how thick is the plate?

1.5mm :3

[MaiTheSan]

Could we get more information on the board? Materials for the chassis, weight and plate?

aluminium 6061 or 6063, plate and weight aluminium or brass
anode, e-coating and cerakote :V

[FootFingers]

@MaiTheSan

Is there a Discord channel or anything we can use for updates? Very interested in this design

[DuellM]

I really like this keyboard hopefully I can participate in the gb


Sent from my iPhone using Tapatalk

[MaiTheSan]

@MaiTheSan

Is there a Discord channel or anything we can use for updates? Very interested in this design

soon :3 when prototype done :V

[MaiTheSan]

I really like this keyboard hopefully I can participate in the gb


Sent from my iPhone using Tapatalk

Thanks~

[Curin Derwin]

ALPS Support?

[MaiTheSan]

ALPS Support?

"maybe" yes :V

[SherlockBunny]

Not bad at all! hot swap option? Interested

YES please add a hot-swap option. I love the design btw, especially the back. Would definitely buy with hot-swap PCB.

[El_Jackador]

Please round the corners!

[grabmienutz]

Eva 01 render looks sikkk, I dig the normal purple as well

[Voidec]

very interested. Will be there for GB

[SherlockBunny]

Also what colors do you think this'll be released in? Will it just be the purple and sky blue or will there be others?

[ibabo]

Hello
I would like to buy one.
But my concern. Can I have machined in Orthographic prospective?
Thank you
 

[DoubtsBox]

The look of this is really nice so far. I agree with what people are saying about centering the design on the bottom of the board and I hope there will be more colors in the future. Keep at it <3

[Willtato]

Really quite interested in this.  Is that a thick plate?

Sent from my HD1913 using Tapatalk

[MaiTheSan]

Really quite interested in this.  Is that a thick plate?

Sent from my HD1913 using Tapatalk

nope, only 1.5mm :>

[mikeyboyy]

Is it possible to do symmetrical wkl? Board looks great

[Guvnor]

Looks like high end "gaming" keyboard, with all the accents. Especially that blue and yellow. Gaming keebs usually look cheap. This looks awesome.

[TheSeaRabbit]

Have you decided on all final color options? Would be interested in seeing this in a red.

[bt2108]

hí hí hí
can't wait for your board

[SherlockBunny]

Will this have support for split backspace?

[JoltFX]

Would love to see more information on PCB and other details


“𝙁𝙖𝙞𝙩𝙝 𝙞𝙨 𝙩𝙝𝙚 𝙗𝙞𝙧𝙙 𝙩𝙝𝙖𝙩 𝙛𝙚𝙚𝙡𝙨 𝙩𝙝𝙚 𝙡𝙞𝙜𝙝𝙩 𝙬𝙝𝙚𝙣 𝙩𝙝𝙚 𝙨𝙠𝙮 𝙞𝙨 𝙨𝙩𝙞𝙡𝙡 𝙙𝙞𝙢.”

[luke2fr]

offer an iso compatibility and I may be really interested. 5° angle is my thing !

[Julia]

Do you plan to offer that purple as an option? I've been looking for a purple alu since forever and would be interested.

[bagelbyte]

oh buddy this looks good. I'd be interested in this in e-white or black

[rooney]

Commenting to keep track of this GB. I love the colors you have. That Cyan and brass are amazing, it's different. I also love the Purple and brass as well. Reminds me of my Reborn60.

[valen_c13]

 finally i see 5* ... bored with all this monumental  7*

Отправлено с моего HD1913 через Tapatalk

[treeleaf64]

Is there a prototype of it, does it exist in real life, or is it simply a design not come to fruition

[Emasterbro]

 :thumb:if only i had the money

[FlaminFingers]

Love the design, just want to ask if ALPs support is confirmed?
Gasket mount would also be really awesome, if possible. I would love it even more if this had a higher typing angle though, since 5 degrees seems really flat imo.

Other than that, the logo looks great and I can't really tell if it's off-center or not as another user mentioned -- looks fine to me.
Can't wait to see all the color options, too!

Great job!

[eljudio42]

Very interested, love the colourways too.

[Kingjunguhn]

Very interesting design. Definitely considering this

[iRetro]

Commenting to keep this post current on IC/GB. Absolutely love this design.
Are you planning any other color options?
Very interested. Can't wait for GB date.

[MaiTheSan]

prototype incoming
but it have little bit diffrent from the design

[Sicowa]

really like the design! Really sad I missed a kyuu because of the cool mounting style used.
Pretty cool to see it here. Definitely interested. Do you have a Discord server/ ID to msg for updates?
Would really like to see if there are any other planned colour options.
With the thickness of the plate on the edges I would also like to see a thicker plate option if possible.
GLWIC and I hope to see this in GB on day 

[Zanhana]

prototype incoming
but it have little bit diffrent from the design

Show Image

Show Image

so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.

also what on earth is going on with the right side blocker

[MaiTheSan]

prototype incoming
but it have little bit diffrent from the design

Show Image

Show Image

so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.

also what on earth is going on with the right side blocker

it 65%, in factory, they don't know how to assemb this. fix soon

[Zanhana]

prototype incoming
but it have little bit diffrent from the design

Show Image

Show Image

so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.

also what on earth is going on with the right side blocker

it 65%, in factory, they don't know how to assemb this. fix soon

I now see that the plate is installed upside down. That makes a lot more sense now that my brain has sorted out the image.

[iRetro]

Love the colors for the last photo. Are there going to be any other color options?  Any possible dates yet for the final pricing/GB?

[MephistoXD]

Is there an estimated price and is there a chance for hotswap?

[fredprinz21]

Possible to request the following colours --
charcoal black
teal
sunrise red

thank you and good luck with IC!

Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?

I will update after i have prototype :V, can you suggest some color?? :3

[Rx003]

Love the corners, but not something I will instantly get. Good luck with IC and wish you all the best for this project!

[genevatypes]

Awesome design! Loving the prototype. Interested 

[shpshft]

If you can ship the purple version, it'll be an instant-buy for me.

[nylon]

if its iso compatible im in

[YeeticusTexacus1]

Honestly love the design, good luck with the IC

[Timception]

If price not too heavy, and an eva color scheme is available, count me in.

[Tisoy]

Any further updates on the board?

[malignant narcissism]

I hope this happens-- sad it's been dark for a year now.