Orion V2 Kustom TKL Group Buy

[E3E]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Regarding alps for the new 75% I am not sure they will go along with it unless there are significant interest in it. If there are they can  get leeku to make them as an add on.

The suspense is real. 

Well, there has been a LOT of Alps support lately and many in the community are starting to really pay attention to them. Hopefully we can get an Alps PCB!

[blighty]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Regarding alps for the new 75% I am not sure they will go along with it unless there are significant interest in it. If there are they can  get leeku to make them as an add on.

 
Great news!  Now I have to finally decide what switches and caps to put on this...

[KatzenKinder]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

[njbair]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

"Oh hey, look, this must be from that Pay It Forward thing! Oh, my, how generous of my anonymous benefactor!"

[KatzenKinder]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

"Oh hey, look, this must be from that Pay It Forward thing! Oh, my, how generous of my anonymous benefactor!"

I've probably abused the "anonymous benefactor" too much already, dunno if that one's gonna fly again.

[njbair]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

"Oh hey, look, this must be from that Pay It Forward thing! Oh, my, how generous of my anonymous benefactor!"

I've probably abused the "anonymous benefactor" too much already, dunno if that one's gonna fly again.

Perhaps your cap craft has earned you such a reputation among enthusiasts, that keyboard manufacturers are sending you early releases in order to get a glowing endorsement?

[KatzenKinder]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

"Oh hey, look, this must be from that Pay It Forward thing! Oh, my, how generous of my anonymous benefactor!"

I've probably abused the "anonymous benefactor" too much already, dunno if that one's gonna fly again.

Perhaps your cap craft has earned you such a reputation among enthusiasts, that keyboard manufacturers are sending you early releases in order to get a glowing endorsement?

If only I were famous in Korea, then I can go be kpop keyboard star with my Orion

[elton5354]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Regarding alps for the new 75% I am not sure they will go along with it unless there are significant interest in it. If there are they can  get leeku to make them as an add on.

The suspense is real. 

Well, there has been a LOT of Alps support lately and many in the community are starting to really pay attention to them. Hopefully we can get an Alps PCB!

Given that there was an ALPs option in this group buy, there were only 7 orders (2 of which were mine)..so I don't know..

[Rainbow_]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Very nice!

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

Is there a problem with saying you bought it (assuming that is what you did)?

[KatzenKinder]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Very nice!

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

Is there a problem with saying you bought it (assuming that is what you did)?

I've had too many boxes come in lately, and the boss is not pleased lolol

But I figured out shipping gonna ship directly to builder, so I can dodge for a bit

[elton5354]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Very nice!

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

Is there a problem with saying you bought it (assuming that is what you did)?

I've had too many boxes come in lately, and the boss is not pleased lolol

But I figured out shipping gonna ship directly to builder, so I can dodge for a bit

When are you going to make more of those watermelon seed caps??

[KatzenKinder]

The first 30 will be shipped soon. The rest will follow after a few weeks.

Very nice!

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

Is there a problem with saying you bought it (assuming that is what you did)?

I've had too many boxes come in lately, and the boss is not pleased lolol

But I figured out shipping gonna ship directly to builder, so I can dodge for a bit

When are you going to make more of those watermelon seed caps??

Show Image

lol that's KeyKollectiv (Kudos & Koala) not me kekeke

[Want]

Shipping soon? This is bliss.

[Fnzzy]

Did I hear shipping? Oh baby! They should put out an updated version of the keymapper though. Latest version only supports up to the Octagon.

[asgeirtj]

Nice! So it's looking probable before Christmas...

Now I just have to figure out how to explain its appearance or smuggle it into my house :v

LOL

[ika]

mfw I picked up order #29 when the first 30 are shipping

[appleonama]

Well, I was desperate to sell mine because I needed the money but I'm doing well now. I can't wait for this keyboard now.

[frostylove]

Well, I was desperate to sell mine because I needed the money but I'm doing well now. I can't wait for this keyboard now.

Oh Please,
tell yourself it's just a fxxking KEYBOARD.

[appleonama]

Well, I was desperate to sell mine because I needed the money but I'm doing well now. I can't wait for this keyboard now.

Oh Please,
tell yourself it's just a fxxking KEYBOARD.

it is just a keyboard and nothing else

its a luxury item and im fully aware of that. I'm still a student who makes a small amount of income doing  online jobs but I can manage. if you're tired of keyboards why are you still here 

[Steezus]

Well, I was desperate to sell mine because I needed the money but I'm doing well now. I can't wait for this keyboard now.

Oh Please,
tell yourself it's just a fxxking KEYBOARD.

it is just a keyboard and nothing else

its a luxury item and im fully aware of that. I'm still a student who makes a small amount of income doing so online jobs but I can manage. if you're tired of keyboards why are you still here 

Having interest in keyboards and being on the broke student budget is a bad mix, I'm on the same boat as you.

[Sed8op8]

I really need to invest in a new soldering iron  can someone in this thread direct me to someone who offers great keyboard assembly service !? I would references from people who have dealt directly with the people they refer if possible  thanks all

Also it seems like we are almost there so thanks again Elton and PD for making this possible

[E3E]

I really need to invest in a new soldering iron  can someone in this thread direct me to someone who offers great keyboard assembly service !? I would references from people who have dealt directly with the people they refer if possible  thanks all

Also it seems like we are almost there so thanks again Elton and PD for making this possible

Well, I did help repair phatdood's Viper PCB

I think I broke my pcb somehow resoldering the switches to gateron blues :-( on my duck viper. Every key works except the 7 key.

Is it possible to get a new pcb? Any tips on fixing it?

Thx so much to E3E for fixing my viper!   

Show Image

Also a buildlog for my Infinity keyboard: http://imgur.com/a/Zrcjx#0

I have desoldered, switch swapped, switch-tuned, and assembled many boards myself, including my Octagon, and I can do repairs up to pad and trace repair (though if your microcontroller is shot, your SOL with me). 

I certainly don't mind being a last resort if you'd rather someone who has more history on this site. I did the Viper repair for free. I'd' pretty much just ask you to pay what you feel I should deserve for the assembly. If that's nothing but shipping, then that's fine by me.  :)

I can't lie that it'd be cool as hell to see an Orion in the flesh (though my heart will always be with the Octagon <3)

[Ahkrael]

I'm also looking to get a soldering station.  I've got a few extra QFRs to practice on first - I want to convert one of them from browns to gateron clears.

I saw a picture with the LED pins clipped and inserted into pre-soldered pin holders - I'm guessing the board does not come with these clips?  I'm talking about the LEDs for the 3 and 5 array strips.  Just trying to get a list of everything I would need, and I like the idea of being able to easily clip and try other LEDs if I buy a bunch, than resoldering.

[ika]

I'm also looking to get a soldering station.  I've got a few extra QFRs to practice on first - I want to convert one of them from browns to gateron clears.

I saw a picture with the LED pins clipped and inserted into pre-soldered pin holders - I'm guessing the board does not come with these clips?  I'm talking about the LEDs for the 3 and 5 array strips.  Just trying to get a list of everything I would need, and I like the idea of being able to easily clip and try other LEDs if I buy a bunch, than resoldering.

I think you're talking about SIP sockets. https://geekhack.org/index.php?topic=51792.0

You'll have to push the sockets out of their plastic housing if you want the switch to close completely. http://imgur.com/a/asdXP

[Rainbow_]

Looks like anyone who wanted new software got their wish granted.

[kacase]

I'm also looking to get a soldering station.  I've got a few extra QFRs to practice on first - I want to convert one of them from browns to gateron clears.

I saw a picture with the LED pins clipped and inserted into pre-soldered pin holders - I'm guessing the board does not come with these clips?  I'm talking about the LEDs for the 3 and 5 array strips.  Just trying to get a list of everything I would need, and I like the idea of being able to easily clip and try other LEDs if I buy a bunch, than resoldering.

I think you're talking about SIP sockets. https://geekhack.org/index.php?topic=51792.0

You'll have to push the sockets out of their plastic housing if you want the switch to close completely. http://imgur.com/a/asdXP

I have a completely different approach on putting in SIP sockets. And just made a little guide. http://imgur.com/a/ewFAz

This is how i made all the switches for my ORION

[Ahkrael]

I'm also looking to get a soldering station.  I've got a few extra QFRs to practice on first - I want to convert one of them from browns to gateron clears.

I saw a picture with the LED pins clipped and inserted into pre-soldered pin holders - I'm guessing the board does not come with these clips?  I'm talking about the LEDs for the 3 and 5 array strips.  Just trying to get a list of everything I would need, and I like the idea of being able to easily clip and try other LEDs if I buy a bunch, than resoldering.

I think you're talking about SIP sockets. https://geekhack.org/index.php?topic=51792.0

You'll have to push the sockets out of their plastic housing if you want the switch to close completely. http://imgur.com/a/asdXP

I have a completely different approach on putting in SIP sockets. And just made a little guide. http://imgur.com/a/ewFAz

This is how i made all the switches for my ORION

Very useful, thank you for the info.  I probably won't do much with in-switch LEDs, I'm more concerned with the 3 and 5 array, I'm guessing I can leave the SIP attached to the casing and just solder those on the board.

I'm getting the plastic plate, so I'm thinking there will be a bit of backlight bleed from the underside RGBs, which I like how it looks in the pictures.  Either way it's great to have the info on arranging the SIP.  Considering I ordered 60 zealios, I'll be modding around 30 other switches to add on the board for the non-alphas, might be a good idea to SIP on those while changing springs just for the future.

[ctrlX]

Due to limited amount of time (kids ), I am also considering getting mine assembled. Otherwise there is a great risk mine will be finished when V3 is out...   

Money is not a big issue, time is. As long as the build is made with tender loving care and I wouldn't expect anything less from this great community! 

Only problem is that I am located in Sweden, so shipping it + all parts to the States or Asia is a bit of a drag. Anyone located within the EU that has good experience assembling keyboards and willing to offer their services in exchange for some extra cash?

[Rodgaroon]

Due to limited amount of time (kids ), I am also considering getting mine assembled. Otherwise there is a great risk mine will be finished when V3 is out...   

Money is not a big issue, time is. As long as the build is made with tender loving care and I wouldn't expect anything less from this great community! 

Only problem is that I am located in Sweden, so shipping it + all parts to the States or Asia is a bit of a drag. Anyone located within the EU that has good experience assembling keyboards and willing to offer their services in exchange for some extra cash?

https://geekhack.org/index.php?topic=73134.0

Location - Sweden. You are Welcome =)

[ctrlX]

Due to limited amount of time (kids ), I am also considering getting mine assembled. Otherwise there is a great risk mine will be finished when V3 is out...   

Money is not a big issue, time is. As long as the build is made with tender loving care and I wouldn't expect anything less from this great community! 

Only problem is that I am located in Sweden, so shipping it + all parts to the States or Asia is a bit of a drag. Anyone located within the EU that has good experience assembling keyboards and willing to offer their services in exchange for some extra cash?

https://geekhack.org/index.php?topic=73134.0

Location - Sweden. You are Welcome =)

Wicked! Thanks for the tip.

[ramnes]

Any news Elton?

[rsadek]

Well, I was desperate to sell mine because I needed the money but I'm doing well now. I can't wait for this keyboard now.

.... just a fxxking KEYBOARD....

...just a keyboard...

These words make no sense together. Like one of those wacky shirts:

[ramnes]

Am I the only one worried by the fact that my Paypal protection ends in a week for that paiement?

I don't see the point of paying Paypal fees if the shipping is done after the protection limit.

Also, Elton, please communicate. That's terrible to be in the dark like we are right now.

[Want]

Am I the only one worried by the fact that my Paypal protection ends in a week for that paiement?

I don't see the point of paying Paypal fees if the shipping is done after the protection limit.

Also, Elton, please communicate. That's terrible to be in the dark like we are right now.

This is a valid concern. My transaction says (roughly translated): "If there's a problem, contact the seller through PayPal before the 20th October 2015", which is today.

I have confidence in Elton delivering a solid product, but expiring safety is always troubling.

[monotagary]

Am I the only one worried by the fact that my Paypal protection ends in a week for that paiement?

I don't see the point of paying Paypal fees if the shipping is done after the protection limit.

Also, Elton, please communicate. That's terrible to be in the dark like we are right now.

Elton has run multiple group buys for Duck's custom boards. He has a stellar track record with handling large amounts of money and getting items out to people in the best condition possible. You have no reason to worry.

[ramnes]

It's not against Elton, I trust him, but if anything happens (package lost, case broken), I feel like I'll be a very bad position.

Also, what's the point of paying Paypal fees if we don't use Paypal protection?

[monotagary]

It's not against Elton, I trust him, but if anything happens (package lost, case broken), I feel like I'll be a very bad position.

Also, what's the point of paying Paypal fees if we don't use Paypal protection?

PP fees are paid so that elton doesn't lose money on the buy. Otherwise PP takes a cut directly and he loses out. It just makes it so GBs are more appealing for leaders to run. Also elton will cover anything damaged if you notify him immediately. And also take note that your concerns are totally valid, but elton will take care of us and make sure everyone gets exactly what they paid for.

[ramnes]

PP fees are paid so that elton doesn't lose money on the buy. Otherwise PP takes a cut directly and he loses out.

Then why didn't we just make a payment as gift?

[appleonama]

There is a higher possibility of me dying before getting this. 

[Rainbow_]

There is a higher possibility of me dying before getting this. 

We could arrange that. 

[Photoelectric]

Cross-posting from the Lightsaver photo thread: would like to clarify whether Duck boards are fully compatible with Apple laptops/desktops.  Apple's OS-X is mostly a black box mystery to me in terms of drivers, since I have never owned a device with one, so I figured I'd ask to make sure.

[Dreamre]

PP fees are paid so that elton doesn't lose money on the buy. Otherwise PP takes a cut directly and he loses out.

Then why didn't we just make a payment as gift?

I'll gladly take your order if you're sceptical about this GB .

[ramnes]

That doesn't answer my question! 

[Rainbow_]

Well, it's gotta be soon...

[monotagary]

Show Image

Well, it's gotta be soon...

[ccc24]

anyone have any info on what GB he's running next?

[monotagary]

anyone have any info on what GB he's running next?

I think Eagle/Viper v2 are next. Not 100% sure though.

[E3E]

anyone have any info on what GB he's running next?

I think Eagle/Viper v2 are next. Not 100% sure though.

Elton showed Duck's plans for an Octagon v2 (if it's going to be called that again, anyway). I think Viper and Eagle v2 will probably be after that, but who knows.

[Fnzzy]

Isn't there still the next Lightsaver group buy? Not sure what happened to this.

[Steezus]

Isn't there still the next Lightsaver group buy? Not sure what happened to this.

This is the current Duck group buy, once this is done then the next project should be the Octagon v2, then Eagle/Viper v2, and then hopefully a second round of Lightsaver r2. This group buy is near the completion stage waiting for the parts to be shipped.