Price Check- What's it Worth?

[zooksman]

Snagged a Model F XT in pretty much perfect condition with its original box, foam inserts, etc. Looks as if it's never been used. Any ideas?

[doom2]

Snagged a Model F XT in pretty much perfect condition with its original box, foam inserts, etc. Looks as if it's never been used. Any ideas?

Sell to me? 

But seriously, I've bought one before in decent condition for $80 + shipping. Highest I've seen is ~$100. And really, I'd buy yours!

[doom2]

.

[BunnyLake]

What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.

Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay

2000-5000 is probably a realistic estimate depending on a number of factors

It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream

[dgneo]

What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.

I'll give you 25 Schmeckles for that baby

[doom2]

.

[BunnyLake]

I'll give you 25 Schmeckles for that baby

Need a little more than that.

Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay

2000-5000 is probably a realistic estimate depending on a number of factors

It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream

The current offer on the table is $2.5k. I can't afford it, but am looking for someone who can.

That's honestly not a bad price, I mean obviously no keyboard is "worth" that, but that is just a unicorn type board, they don't come up and when they do the prices swing a lot, but you are hard pushed to find any v1 mini nowadays for sub 1500, for someone, who is a lot better off than me, that 2500 will be a steal


Sent from my iPhone using Tapatalk

[Zombly]

Have a lightsaver v1, that i'm looking to part with bought it last year but due to buying a house have to get rid of it, it's got mx brown switches and a silver case ill edit this post later and post some pictures just trying to get an idea what it's worth was thinking like 300?

[precarious]

been a while since i've followed any keyboard-related happenings, wondering what these vintage PBT keycaps and novelty keycaps might go for nowadays.  i posted a classified thread here the other day, but would be interested in some input.  it seems there are a lot of reproductions out there for cherry keycaps now, so i'm sure these have fallen off a bit, just not sure how much.  they are still really nice keycaps, though! i've been using a different colored set of them for four or five years now, they're still wonderful and have held up perfectly.

[Hand]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

[Chronnoisseur]

Test Subject 22 BBv2  in mx?

[pr0ximity]

What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.

[ArchDill]

What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.

Show Image

[doom2]

.

[romevi]

Overrated keeb, anyway.

[Moistgun]

His much is a corsair strafe worth with no switches?

30 bucks?

50?

throw some gaterons in there get a good bit more, with an easier chance to sell.

[alienman82]

removed.

[doom2]

meh.. it's a pity to program, and poorly implemented.  Just old.

Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.

Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?

[cicada]

meh.. it's a pity to program, and poorly implemented.  Just old.

Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.

Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?

Fake Koalas

[alienman82]

removed.

[alienman82]

removed.

[dgneo]

Your salt only makes my penis harder

[BunnyLake]

meh.. it's a pity to program, and poorly implemented.  Just old.

Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.

Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?

Fake Koalas

I am saying that the price to what you get isn't worth it at all.  The 356 mini is nice and all, but you're really going to pay an extra at least $2000 for a color variant?

Even the 'cheap' ones are priced way too high.  You're getting a case which isn't modular, so you're stuck with how it's built.  Uses detachable ps2?  what is this 1990?

Needs an external programmer, and until recently, there were no English guides on how to program it...


I would go after a Duck Poker Case and use a Bface PCB and whatever plate you want.  That would be way more worth your time and still extremely awesome.

456Gt... you were considering 'fixing' up one, no one would buy that from you even if it was fixed since you'd have to have it milled back down or just spend way too much to get it to new quality.  you could get an undamaged one for less.

Even if you got an undamaged one, it's still too high of an angle, and has all the other programming issues of the mini. Another thing for doom2, if you can afford the 356mini, you might as well design your own board if you've got the skills. 

Mod Edit:  Keep the personal attacks and slander off the forum. 
User has been issued a warning for this.

Nothing to do with me but then again you never miss an opportunity to use my name


Sent from my iPhone using Tapatalk

[alienman82]

removed.

[alienman82]

removed.

[BunnyLake]

meh.. it's a pity to program, and poorly implemented.  Just old.

Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.

Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?

Fake Koalas

I am saying that the price to what you get isn't worth it at all.  The 356 mini is nice and all, but you're really going to pay an extra at least $2000 for a color variant?

Even the 'cheap' ones are priced way too high.  You're getting a case which isn't modular, so you're stuck with how it's built.  Uses detachable ps2?  what is this 1990?

Needs an external programmer, and until recently, there were no English guides on how to program it...


I would go after a Duck Poker Case and use a Bface PCB and whatever plate you want.  That would be way more worth your time and still extremely awesome.

456Gt... you were considering 'fixing' up one, no one would buy that from you even if it was fixed since you'd have to have it milled back down or just spend way too much to get it to new quality.  you could get an undamaged one for less.

Even if you got an undamaged one, it's still too high of an angle, and has all the other programming issues of the mini. Another thing for doom2, if you can afford the 356mini, you might as well design your own board if you've got the skills. 

Mod Edit:  Keep the personal attacks and slander off the forum. 
User has been issued a warning for this.

Nothing to do with me but then again you never miss an opportunity to use my name


Sent from my iPhone using Tapatalk

Someone in your slack had showed me screenshots of it being discussed, you included in that discussion..  then again CTRL ALT never miss an opportunity to beat a dead horse

Sent from my Salt Mine using Tapatalk

Oh I'm well aware of the situation and have certainly discussed it but I wasn't the one who didn't keep it a secret, nor was I the one who told everyone in the buy it was fake

But you write history however you want


Sent from my iPhone using Tapatalk

[Photekq]

your LZ circle Jerk 75% weeb edition

m8 he wasn't even in that gb

[exitfire401]

Let's keep this on topic, and enough with the personal attacks

[meiosis]

your LZ circle Jerk 75% weeb edition

m8 he wasn't even in that gb

Came here to post this too

[alienman82]

removed.

[Photekq]

Came here to post this too

change ur avatar and price all my stuff for me

[alienman82]

removed.

[meiosis]

Came here to post this too

change ur avatar and price all my stuff for me

我不想

[Photekq]

我不想

你是個小男孩

[alienman82]

removed.

[cicada]

.

[Photekq]

Let's keep this on topic

哈哈哈哈哈哈

[Hand]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."

I'm still interested in opinions about a fair asking price for this keyboard.

I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.

[meiosis]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."

I'm still interested in opinions about a fair asking price for this keyboard.

I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.

Would be quite little maybe less than you would get desoldering the switches $50 or so

eBay you should find some MX clear.options.i would consider Leopold and filco as well

Sent from my Pixel XL using Tapatalk

[Hand]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."

I'm still interested in opinions about a fair asking price for this keyboard.

I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.

Would be quite little maybe less than you would get desoldering the switches $50 or so

eBay you should find some MX clear.options.i would consider Leopold and filco as well

I've never touched a soldering gun, so I fear I'd damage something.

Had a WASD MX Clear keyboard briefly. It was functionally perfect, but the horizontal seam in the case drove me nuts for aesthetic reasons. I'm considering the Leopold FC980C (topre switches), but I'd like to be able to use my og Cherry double shot keycaps. A Novatouch I tried out felt pretty good, so I imagine that Leopold would be fine, too. I need something with a numpad, so that eliminates most current MX Clear boards.

[meiosis]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."

I'm still interested in opinions about a fair asking price for this keyboard.

I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.

Would be quite little maybe less than you would get desoldering the switches $50 or so

eBay you should find some MX clear.options.i would consider Leopold and filco as well

I've never touched a soldering gun, so I fear I'd damage something.

Had a WASD MX Clear keyboard briefly. It was functionally perfect, but the horizontal seam in the case drove me nuts for aesthetic reasons. I'm considering the Leopold FC980C (topre switches), but I'd like to be able to use my og Cherry double shot keycaps. A Novatouch I tried out felt pretty good, so I imagine that Leopold would be fine, too. I need something with a numpad, so that eliminates most current MX Clear boards.

Wasd is a bit taller but ducky and filco seem very similar and it's not worth novatouching Leopold is best stock just opening changed it irreversibly as the case never fits the same when you close it. I'd say a filco is your best bet if you want an amazing oem MX clear board

Sent from my Pixel XL using Tapatalk

[SpAmRaY]

Ducky DK9008 Shine 3 MX Brown (2.5 yrs)

Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.

No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."

I'm still interested in opinions about a fair asking price for this keyboard.

I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.

Would be quite little maybe less than you would get desoldering the switches $50 or so

eBay you should find some MX clear.options.i would consider Leopold and filco as well

I've never touched a soldering gun, so I fear I'd damage something.

Had a WASD MX Clear keyboard briefly. It was functionally perfect, but the horizontal seam in the case drove me nuts for aesthetic reasons. I'm considering the Leopold FC980C (topre switches), but I'd like to be able to use my og Cherry double shot keycaps. A Novatouch I tried out felt pretty good, so I imagine that Leopold would be fine, too. I need something with a numpad, so that eliminates most current MX Clear boards.

Wasd is a bit taller but ducky and filco seem very similar and it's not worth novatouching Leopold is best stock just opening changed it irreversibly as the case never fits the same when you close it. I'd say a filco is your best bet if you want an amazing oem MX clear board

Sent from my Pixel XL using Tapatalk

I didn't think Leopold or Filco made MX clear boards?

[Hand]

I didn't think Leopold or Filco made MX clear boards?

Leopold does, but not full sized. I wish Filco did because I'd buy one instantly.

Is the IKBC/Vortex G104 supposed to be of reasonably good quality? I never heard of it before today.

[yonghf]

Can I get a price check for R2 Whitefox Aria with Cherry MX Reds? Used for about 2 months.

[doom2]

.

[alienman82]

removed.

[meiosis]

What's a good price on an LZ-S?

If I recall, less than 30 of these were made. The only price I could find was the sky blue one that cost the owner ~$500 a few years ago.

Note: I don't own the board, someone is offering to sell it to me. Learned my lesson last time with the OTD post.

$600-700 the $500 one I believe was mostly the cost of fixing it

Sent from my Pixel XL using Tapatalk

[doom2]

What's a good price on an LZ-S?

If I recall, less than 30 of these were made. The only price I could find was the sky blue one that cost the owner ~$500 a few years ago.

Note: I don't own the board, someone is offering to sell it to me. Learned my lesson last time with the OTD post.

you're asking about a lot of rare stuff here.  Not the best place to ask tbh...  best bet is to pm some big collectors.

So, you? :-P I did pm MrBoonVn.

Sent from my Pixel XL using Tapatalk

[alienman82]

removed.

[deductivemonkee]

Binge Safety Beast Switch Doctor?