[GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]

[sennin32]

[Update Mar 20 '19]
Hi,
We found we got some error paypal setting last week.
Some of orders can not go through.
This groupbuy will extend a week to late Mar
[End of Mar 20 '19]

Hey, everyone! I'm Shiang Yu from Doyu Studio.
This is group buy for Doyu Studio - Chiwi60 kit R2.

The Chiwi60  was conceived by the mechanical keyboard community member gok from New Zealand who named the keyboard after a colloquial term that was short for Chinese Kiwi.

The board is designed to have medium sized bezels with a 30 degree chamfer on the top face to provide visual interest to the most visible face of the keyboard.
30 degrees has been specifically chosen so that the top and side bezels still have presence from natural viewing angles despite the faces tapering away and also makes the keyboard appear shorter and sleeker.

The design aims to provide the keyboard with a seamless aesthetic and underglow that is integrated rather than just an afterthought.

A unique features of the keyboard are the optional dual 3u spacebar layout which allows for splitspace with convex spacebars rather than what you would usually have with the 2.25/1.25/2.75 split.

Buying page : Click or paste https://shopkey.doyustudio.com/dy01b6

Pics



Pic from geeks!

See more images with larger size here!
PVD/DLC
Anodized
Some more
R1 products


Major changes in R2 :

• Stainless steel instead of brass for DLC/PVD kitsDO60s PCB
• Major parts made in Taiwan
• Removed unpopular layout to reduce cutouts
• Removed universal USB port option
• Change to screw-in stabilizers
• upgrade to DO60s PCB (Kit compatible with DO60)

Links :
Buying page : Check here
Interest Check Thread : https://geekhack.org/index.php?topic=92790.100
Group buy thread of round 1 : https://geekhack.org/index.php?topic=93969.0


Kit include :

• Body
• Mount plate
• Bottom plate
• Name plate
• Screws
• Round rubber feet
• Manual cards
• PCB
• Glove(DLC body kit only)

Features/Specs/Design :

• Non-floating
• 7 deg angled
• Aluminum Body /  stainless steel Body
• Brass plate and name plate
• PVD gold brass with mirrored polishing.
• PC bottom plate with sandblast
• 1.5mm thickness mount plate

Surface finishing:

• Black DLC with mirror polished stainless steel.
• Sandblasted raw stainless steel
• Sandblast & ED aluminum for white
• Sandblast & Anodized

*Why not powercoating for white one?

1. ED offer a thinner and controllable coating layer
2. ED is much more even than powercoating
3. Lesser human work, stable quality, powercoating rely on worker skill more


Add-ons and Upgrades :

• Wedged shape bottom piece
• Flat DLC/PVD bottom
• Extra PCB and plate
• Screw-in stablizers by Cherry
• Other combination? contact us!

Wedged shape bottom design


Time frame & to do :
Collecting orders till : Mar 18 '19 Extend to late Mar
Est. deliver : Sep, '19
For more details please Find out on Trello



* stabilizer pack contains :

• plastic part for up to 6 caps (Genuine Cherry parts)
• 4*2u wires, 2*3u wires, 1*6.25u wire, 1*7u wire

Things you might want to know / FAQs :

• Will XXX PCB fit this kit? :
  Quick answer : NO.
  Details : we made USB port fit with only 0.5mm tolerance for the cutout.
  That means no other PCB will fit the design unless they made their PCB based on out design.
  Which means the only 1 fit I know is PCB for Chiwi60 made by Maarten.
  
• Shipping cost :
  put item into cart and you can check it before payment made.
  If it not shows up, contact us with following info, so we can check shipping table db and spot issue:
  1. Destination country
  2. Address include will be appreciate
  3. Order details include quantity.
• Weight for kit(switches and cap included, cable not included)
  Aluminum : around 1.2 kg
  Stainless : around 1.8 kg
  DLC bottom : around 0.8~1 kg
  * weight might vary due to different layout or parts using
• Will bottom and plate fit R1 ki?
  Yes, but we didn't list it.
  If you want one of them, please contact us include one of the following info, we'll check what layout you have :
  1. directly tell us your layout include pics (sorry, we found there's people confused with layout name)
  2. Order number
  3. Order mail (not paypal id if you use 2 mail address)
  4. Other info, ie. paypal transaction id, paypal user id, name of billing or shipping. (Other info might hard to find correct info or take longer time)
• Will we run away with your money?
  Maybe A_A

[sennin32]

update : 2019 Feb :
Update imgur gallery for R1 products.
Add sandblasted raw stainless steel bottom into upgrade option.

[Signature]

Approved, Gl w GB!

[sandragm]

Which layout should I pick in order to include arrows?

[wixxzblu]

I have the R1 chiwi, and it surprisingly is one of my best sounding board even tho others have said it sounded hollow, just wishing i could get my hands on the 6u hhbk variant this round, but it looks like this option have been scrapped.

[sennin32]

Approved, Gl w GB!

Thank you

[sennin32]

Which layout should I pick in order to include arrows?

HHKB has no arrow.
The rest has it.

[F2F4]

Can I do split space hhkb?

[tunadesu]

Any pictures of the Tiffany ano? I think it may be the wrong pic on the site when you choose the option

[gok_nz]

I have the R1 chiwi, and it surprisingly is one of my best sounding board even tho others have said it sounded hollow, just wishing i could get my hands on the 6u hhbk variant this round, but it looks like this option have been scrapped.

I built a tsangan layout chiwi and I understand what you mean about the spacebar being thocky but I think you would lose it if the spacebar is shifted to the left since the switch would be close to the mounting point and make the spacebar sound less consistent.

[Minterly]

What are the differences in the bottom upgrades?

[sennin32]

What are the differences in the bottom upgrades?

1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs

Any pictures of the Tiffany ano? I think it may be the wrong pic on the site when you choose the option

work now
gallery updated.

[joe405]

Will this work with other USB-C 60% PCBs? Would you add a no PCB option?

[sennin32]

Will this work with other USB-C 60% PCBs? Would you add a no PCB option?

Both answer is no.

[ReAvenger]

If I opt for the DLC bottom as an upgrade, is there a way to get the regular pc bottom as well?

[gok_nz]

If I opt for the DLC bottom as an upgrade, is there a way to get the regular pc bottom as well?

You can contact sennin for custom orders like that.

[Minterly]

What are the differences in the bottom upgrades?

1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.

[Bizpit]

That Stainless Steel DLC Black option looks fantastic. I'd be all over this if it wasn't a 60%.

Any pictures of the 7 degree PC base vs the stock base?

[sennin32]

That Stainless Steel DLC Black option looks fantastic. I'd be all over this if it wasn't a 60%.

Any pictures of the 7 degree PC base vs the stock base?

Image added

What are the differences in the bottom upgrades?

1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.

Hi,
there's 2 options of stainless bottom.
1 is raw with lower price, and the other one is DLC.

[Minterly]

What are the differences in the bottom upgrades?]

1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.

Hi,
there's 2 options of stainless bottom.
1 is raw with lower price, and the other one is DLC.

sweet. any way to add extra bottom? kinda want the PC & DLC

[voight-kampff]

Hi

can I use holties with the DO60 pcb?

thanks

[voight-kampff]

How can I modify my order please?

Sent from my MIX using Tapatalk

[menuhin]

If I cannot join this round, when will be the next round?
I really need the HHKB 6u layout - there are only 1 or 2 keyboard kit that support this true HHKB layout for now.

[sennin32]

How can I modify my order please?

Sent from my MIX using Tapatalk

msg me or mail sy_yang@doyustudio.com

Hi

can I use holties with the DO60 pcb?

thanks

some pads is cut by others, might not stable enough.
Otherwise, it should work nice.
new pcb will not solve this problem(PADs are cut and not complete), although we reduced layout, it still a lot.

[sennin32]

Hi, guys!
We found we got some error paypal setting during last week.
Some of orders can not go through.
This groupbuy will extend a week to late Mar

[voight-kampff]

How can I see if my order is O.K.?

[tex_live_utility]

Will the 6u HHKB top support the 2x3u Split layout?

[voight-kampff]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

[menuhin]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

[Blank]

Does the Doyu split also support ISO layout?

[voight-kampff]

I am really in into the sandblasted steel DLC version
it will be a really special board

[Blank]

Is the RGB visible with the PVD/DLC bottom upgrade? Any pictures with that?

[tex_live_utility]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

[kakiharaOne]

Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?

[voight-kampff]

QC should be good now. They produce this in Taiwan with companies nearer to Doyu Studio, so it is easier and faster for QC.
I talked to Gok some days earlier, he said the plates will be changed to eliminate the problems.

Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?

[kakiharaOne]

QC should be good now. They produce this in Taiwan with companies nearer to Doyu Studio, so it is easier and faster for QC.
I talked to Gok some days earlier, he said the plates will be changed to eliminate the problems.

Was on the fence for those concerns so thanks for the feedback!

[DubbleYew]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

[tex_live_utility]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?



Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.

[sennin32]

Does the Doyu split also support ISO layout?

Hi, No, sorry
It only support ANSI enter.

Will the 6u HHKB top support the 2x3u Split layout?

Hi,
PCB support it.
But we make 7u HHKB this time.
Since we've made 6u in R1. Give 7u a shot!

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Is the RGB visible with the PVD/DLC bottom upgrade? Any pictures with that?

Hi,
RGB will be blocked if you chose a full metal bottom upgrade.

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

Sorry, we offer 7u this time.

Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?

It did has scratches on the plate during R1.
We modified some designs of plate.
Make it easier to do surface processing easier by reducing holes on.
Also, we find another manufacturer to make some brass parts samples.
Although the sample is not good because of too many times rework.
(grind too many times, inner side does not process properly in the beginning and it is hard to do it correctly again)
Surface treatment is pretty nice though except some impure spot.
Those lighter spot is easy to find with black DLC coating, that's why we use stainless steel to avoid it this time.
Plate is still brass. But gold is lighter, the spot with lighter color is not easy to find.
For scratches, new manufacturer is in Taiwan, we can compare and visit more companies which we've done and make decision.
Also we're able to monitor manufacturing and check for major steps before it finished.

[sennin32]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?

Show Image

Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.

[DubbleYew]

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?

Show Image

Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.

Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.

So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

[osamine]

Does the chiwi60 support usb c to usb c?

[Aerizu]

Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.

So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

Can you clarify if you will be offering 6u HHKB top for R2? Thanks!

[sennin32]

Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.

So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

Can you clarify if you will be offering 6u HHKB top for R2? Thanks!

Might not be.
It has to be 10 pcs at least for each color...
If stainless orders are not enough.
We might make some origin HHKB layout and sell them later.
Won't make dessicion before May, unless there's 10 people want the same color for layout not that popular.
It's a little difficult, the only option might work should be white ED and stainless.
 But we will not order extra aluminum since the MoQ is not as hard to reach as stainless one.

Does the chiwi60 support usb c to usb c?

Yes, it does have issue during R1 sampling.
But we've fixed it before R1.
It won't have issue in R2.

[gordonderp]

Did the black chiwi reach the moq?

[sennin32]

Did the black chiwi reach the moq?

Stainless?
Around 10 short @Q@

[gordonderp]

Did the black chiwi reach the moq?

Stainless?
Around 10 short @Q@

Nah just the normal allu one

[sennin32]

Did the black chiwi reach the moq?

Stainless?
Around 10 short @Q@

Nah just the normal allu one

Not reach MoQ, but only few pcs short.
I'm asking if manufacturer are willing to make it.
White is okay, tiffany blue will cancel.

[sennin32]

Two days left from GB ends!
If you love this kit but not yet join it.
Check it now!

We'll make 15 kits of origin HHKB layout (with 6u space) with stainless steel.
Join group buy if you are interested in it

CHiwi60 : https://shopkey.doyustudio.com/projects/chiwi60
Buying page : https://shopkey.doyustudio.com/dy01b6

[gordonderp]

Did the black chiwi reach the moq?

Stainless?
Around 10 short @Q@

Nah just the normal allu one

Not reach MoQ, but only few pcs short.
I'm asking if manufacturer are willing to make it.
White is okay, tiffany blue will cancel.

If the black one doesn't reach moq I down to change to the white if that's possible

[voight-kampff]

wow, there is a 6u hhkb steel version awaible

[Von Steve]

what's the difference between the stock bottom pc plate and the 7 one?

[voight-kampff]

what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case

[Von Steve]

what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case

Do we get the normal bottom plate as well if we order the 7 deg?

[voight-kampff]

Deg. 7 is an upgrade, so no, but you can have an extra if you message Sennin.


 

what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case

Do we get the normal bottom plate as well if we order the 7 deg?

[osamine]

Is it possible to cancel my order?

[gordonderp]

Any updates on the group buy?

[sennin32]

Any updates on the group buy?

Hi,
Out 1st sample of PCB has a power supply error.
And we're making 2nd sample

[sennin32]

Sorry,
But please don't keep asking for modifying orders...
The quantity is still changing every week now.
We'd love to help you guys to meet your requirement, but if the quantity keeps changing.
We're not able to place the case order before quantity confirmation.
It's not a lot, we can't afford too many extra or cancelation after place the order.
And we can't just ignore requests, cause PayPal will simply refund if buyer open request...

[osamine]

Sorry,
But please don't keep asking for modifying orders...
The quantity is still changing every week now.
We'd love to help you guys to meet your requirement, but if the quantity keeps changing.
We're not able to place the case order before quantity confirmation.
It's not a lot, we can't afford too many extra or cancelation after place the order.
And we can't just ignore requests, cause PayPal will simply refund if buyer open request...

Understood. Ill be keeping the order.

[Blank]

Is it still possible to join this group buy as it seems that the website is still open for orders?

[sennin32]

Is it still possible to join this group buy as it seems that the website is still open for orders?

Sorry.
We don't accept orders now.
It is because of I enable back order.
So people can still order it even the quantity is 0.
And it's universal parameter.
I can't disable for only one listing without extra extensions.
To let people see all the options, I didn't disable entire listing.

[mog_genius88]

Selling gb spot. E white, hhkb, stabs.  Base price is $177. Shipping and pp fees pending region

[sennin32]

Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship

[osamine]

Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship

Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro

[sennin32]

Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship

Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro

Yes, will update some pics later when receive.
We just got update for stabs this week as we mentioned in stabs GB.
They should arrive in 6-8 weeks.

[osamine]

Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship

Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro

Yes, will update some pics later when receive.
We just got update for stabs this week as we mentioned in stabs GB.
They should arrive in 6-8 weeks.

I didnt get stabs does that mean we get it sooner?


Sent from my iPhone using Tapatalk Pro

[evorus5]

Can we still order since the site let's us?

[gordonderp]

Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately

[osamine]

Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately

Any link to the discord I dont see any here.


Sent from my iPhone using Tapatalk Pro

[sennin32]

Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately

Any link to the discord I dont see any here.


Sent from my iPhone using Tapatalk Pro

Here it is : https://discord.gg/DjsHqE

[heavyheaded]

How is this progressing?

[ramnes]

Wait, what's up with this pic? Is this case/plate compatible with PFU HHKB PCBs and Topre housings?!

[Draxion]

Oof got into hobby too late and missed this rip. Waiting for R3 then.

[Aerizu]

Show Image

Wait, what's up with this pic? Is this case/plate compatible with PFU HHKB PCBs and Topre housings?!

I believe it's an MX HHKB layout with 6u spacebar and assymetric blockers. Not meant as an aftermarket case for Topre HHKB.

[Kokaloo]

When I go to the website, I'm able to order as it says everything is in stock, am I still able to order a kit?

[Draxion]

When I go to the website, I'm able to order as it says everything is in stock, am I still able to order a kit?

Look at the number you have to order... You can't order 1

[osamine]

So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

[nulltorious]

So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Some updates posted in Discord:
https://discord.gg/fpXpcN

[DubbleYew]

So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Some updates posted in Discord:
https://discord.gg/fpXpcN

Would you mind sharing? I can't see anything in the doyu discord.

[nulltorious]

Latest update was they were still in CNC

[Fallakin]

So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Updates from Sennin are usually few and far between, best case is hitting up the Duyo discord someone else in here linked. Chiwi R1 was similar, but the end product was perfect.

[osamine]

So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Updates from Sennin are usually few and far between, best case is hitting up the Duyo discord someone else in here linked. Chiwi R1 was similar, but the end product was perfect.

I did and they have pretty much been silent.


Sent from my iPhone using Tapatalk Pro

[sennin32]

Tragedy T_T
The manufacturer told me delivering of the case will be mid-Nov......
PCB and other parts have finished and been waiting for a while T_T

[tex_live_utility]

Any update from the manufacturer? Really looking forward to this.

[obtuse]

Any update on this?

[tex_live_utility]

Any update on this?

One month later...

[osamine]

Any update on this?

One month later...

lol

[obtuse]

From the Doyu Studio discord, on dec 10:

Code: [Select]

Sennin32: Last reply is they’ll deliver the case during dec 16-20

[sennin32]

From the Doyu Studio discord, on dec 10:

Code: [Select]

Sennin32: Last reply is they’ll deliver the case during dec 16-20

They delayed= =
I got reply this morning saying that they are working hard on it ha

[buyinggirlfriend]

Any update on the keyboard.
Also is there a way to join the discord for more frequent updates?

[obtuse]

Any update on the keyboard.
Also is there a way to join the discord for more frequent updates?

Discord: https://discord.gg/PXDfmu

Not that there really are any updates on there....

Looks like the last time Sennin32 wrote in the discord was in like July (user is Online, don't know what that really means when it comes to discord), and people have been asking for updates ever since without getting any answers or replies. Sennin32 was last active here on GH in May 1...

[gnho]

Anyone may be interested in purchasing an R1? I am considering letting mine go below GB price. Please PM me if you're interested.

[tex_live_utility]

Sup? We keep getting vague updates in Discord that plates will eventually be made.

When?

Who cares about plates?

You've already published the plate file (thanks for that, btw). Now send me my case; I will make my own plate. I don't want a brass plate anymore anyway.

[InfiniteMan]

Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

[gordonderp]

Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then

[InfiniteMan]

Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then

Could you please share the plate file since the Discord link is invalid.   
Seems everything is done by now right?
It's ridiculous that he has been dealing with the plates over a year if he was really doing it.

[gordonderp]

Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then

Could you please share the plate file since the Discord link is invalid.   
Seems everything is done by now right?
It's ridiculous that he has been dealing with the plates over a year if he was really doing it.

I'm assuming you mean photos of the plate?

Here are some of the photos he sent, essentially there was an issue with the brass coating with the previous batch having a lot of scratches.

[obtuse]

Anybody got a working invite link to the discord, seems the older one is invalid. If the discord is even around anymore.

Really wish I canceled this a long time ago, when there was still time left to do it on paypal.

Will we run away with your money?
Maybe A_A

I mean...

[thoughtworth123]

Anybody got a working invite link to the discord, seems the older one is invalid. If the discord is even around anymore.

Really wish I canceled this a long time ago, when there was still time left to do it on paypal.

Will we run away with your money?
Maybe A_A

I mean...

I tried searching for Doyu Studio and saw this discord link:
https://discord.gg/7TJqKqEh

Seems like there's an update late Aug from Sennin32. You can try it out.

[InfiniteMan]

Again the discord link is invalid...

[obtuse]

Discord link, shouldn't expire: https://discord.gg/7bKuCarcFc

Anyway, no progress, still.

[Evasive]

Is this another group buy horror story?

[heavyheaded]

Years after giving up on this one, just got an address confirmation email for shipping.

[heavyheaded]

Years after giving up on this one, just got an address confirmation email for shipping.

And now I have tracking info!

[Sirenslee]

Didn't get my keyboard yet
The most ridiculous thing is I join the group in Taiwan, and the auther is in Taiwan too.
And I haven't got any information yet. The auther just always hiding.
Maybe we should sue him right?

[obtuse]

It's april 29 2023 and still no keyboard - LOL. And still not answering e-mails. Do we really have to go on discord to bug them all the time? My guess there's not really any answers in there either.

Why even send out e-mails in march 2022 asking people to confirm their addresses if you're not sending anything out anyway?

"Sorry for long wait, good news that we are going to send out your Chiwi 60 order soon." - right.