Price Check- What's it Worth?

[intelli78]

A lightly used no shine RF 87u EK Edition?

$180 shipped, maybe $190 if you're lucky. It's about $215 shipped new from EK and most people buying an RF TKL are doing it for the 55g, so I think you're more likely to fall on the lower end of the range

[Limewirelord]

So, an RT-101 with linear space invaders and an FK2001 worth anything?  Here's some pictures: http://imgur.com/a/DtMgt

[hwood34]

Goldtouch numpad w/ black alps?

[BlueBär]

So, an RT-101 with linear space invaders and an FK2001 worth anything?  Here's some pictures: http://imgur.com/a/DtMgt

Blue or white Alps in the FK2001?
Space Invader switches aren't that popular but I think around 40$ it should get sold.

[allocerveau]

I'm going to sell my HHKB Type-S, white with lettering. It's not a month old, I bought it new from Japan. How much is it worth (I live in Europe) ?

[admiralvorian]

hey I found this keyboard at a surplus store. It's got an RJ45 terminal connector. http://imgur.com/a/auAr0

how much should I sell it for? It's missing the F16 cap.

[Pacifist]

hey I found this keyboard at a surplus store. It's got an RJ45 terminal connector. http://imgur.com/a/auAr0

how much should I sell it for? It's missing the F16 cap.

~$10  Terminal M122s are quite common

[Zephitos]

How much would these masks?




Please Let me know each key caps price.

[Pacifist]

How much would these masks?

(Attachment Link)


Please Let me know each key caps price.

$20 each

[adventurepoop]

What would a cherry 684 4700 numpad be worth, pretty much unused? I got it, opened the box, and its been sitting in a drawer for around 2 weeks as I decided I prefer mx reds over the ml blacks for osu

[BlueBär]

What would a cherry 684 4700 numpad be worth, pretty much unused? I got it, opened the box, and its been sitting in a drawer for around 2 weeks as I decided I prefer mx reds over the ml blacks for osu

ML switches aren't really popular, so I would say around 20$ (rather less than more).

hey I found this keyboard at a surplus store. It's got an RJ45 terminal connector. http://imgur.com/a/auAr0

how much should I sell it for? It's missing the F16 cap.

~$10  Terminal M122s are quite common

Even though they're common I would say more than 10$.

[Melvang]

Price check on stainless TKL plate.

[JaccoW]

Price check on stainless TKL plate.

The Universal TKL ones?

[Melvang]

Price check on stainless TKL plate.

The Universal TKL ones?

Was hoping for one without the easy open switch holes but either will work.  Reason for wanting one without those openings is because of a couple mods I want to do I need all the room I can get in that space between switches of the same row.

[BlueBär]

Was hoping for one without the easy open switch holes but either will work.  Reason for wanting one without those openings is because of a couple mods I want to do I need all the room I can get in that space between switches of the same row.

Maybe make a WTB for a stock one from people who exchanged theirs for a custom one? Then you should be able to get one quite cheap (or for the price of shipping).

[swill]

Price check on stainless TKL plate.

The Universal TKL ones?

They often go on the classifieds for about 45$.

[Honq]

What is a Model M 1391401 made in mexico with removable cable and a Model F 6110345 worth?
Good condition both.

[fohat.digs]

What is a Model M 1391401 made in mexico with removable cable and a Model F 6110345 worth?
Good condition both.

These days, $60-80+ for the M and $100+ for the F.

A year ago, it would have been half that for the M.

F prices are crazy, that one could go for $80 or $180 and no predicting which.

[anoxy]

Would trading a hardcore white topre clack for a solid color MX clack be difficult?

[the random asian]

PC on used Ducky Shine 2 w/ Mx reds and Blue backlighting?

[combataran]

Where can I get a 356mini, and how much do they usually go for?

[Honq]

What is a Model M 1391401 made in mexico with removable cable and a Model F 6110345 worth?
Good condition both.

These days, $60-80+ for the M and $100+ for the F.

A year ago, it would have been half that for the M.

F prices are crazy, that one could go for $80 or $180 and no predicting which.

I just tested and some of the keys dont click as loudly to dont really have a click on the model F*. Is this a case of bad rivets too?
Edit: forgot to say it was the model F

[fohat.digs]

I just tested and some of the keys dont click as loudly to dont really have a click on the model F*. Is this a case of bad rivets too?

The Model F does not have rivets, it is a completely different build.

If the electronics work (ie it is not DOA when you plug it in) then mechanical problems can almost always be fixed if you are taking it apart anyway.

Many "click" problems are the simple result of key stems not being seated properly.

[ComradeSniper]

Where can I get a 356mini, and how much do they usually go for?

You'd probably have to find one on the classifieds. Jcrouse sold his for $450 a few months ago.

[Honq]

I just tested and some of the keys dont click as loudly to dont really have a click on the model F*. Is this a case of bad rivets too?

The Model F does not have rivets, it is a completely different build.

If the electronics work (ie it is not DOA when you plug it in) then mechanical problems can almost always be fixed if you are taking it apart anyway.

Many "click" problems are the simple result of key stems not being seated properly.

Thank you very much!

[davkol]

Used, but working ISO 1991 IBM Model M (1393669)?

[hwood34]

fair price for 420 gummyrot?

[anoxy]

$55

[combataran]

How much is a Design#1 FMJ 60% case with the brass poker weights?

[mashby]

How much is a Design#1 FMJ 60% case with the brass poker weights?

If it's the premium version, then $250, if it's the non-premium then around $180.

[combataran]

How much is a Design#1 FMJ 60% case with the brass poker weights?

If it's the premium version, then $250, if it's the non-premium then around $180.

Does the $180 version include them brass weights?

[mashby]

Does the $180 version include them brass weights?

No, I don't believe it did. That was an additional $50 for the brass weights. More here.

[OnTheBrink]

What is an Apple Keyboard II (Alps) worth? It is the last mechanical keyboard made by Apple before switching to rubber dome.

[roaming pear]

1.  How much are stock abs key caps for poker 2 worth?
2.  How much are stock pbt key caps for poker 2 worth?
3.  How much are the pbt rgb modifiers for the poker 2 worth?
(4. Would anyone even buy stock abs key caps?)

[fohat.digs]

What is an Apple Keyboard II (Alps) worth? It is the last mechanical keyboard made by Apple before switching to rubber dome.

I just sold a really nice one with dampened cream Alps on ebay for $35 + shipping and a fairly nice one with dampened whites for $29 + shipping.

[mashby]

1.  How much are stock abs key caps for poker 2 worth?
2.  How much are stock pbt key caps for poker 2 worth?
3.  How much are the pbt rgb modifiers for the poker 2 worth?
(4. Would anyone even buy stock abs key caps?)

Most stock sets go for very little money. I've sold four sets of stock Pure ABS key caps for $5, but I think you could get at least $25 for the PBT.

Hope that helps!

[Damonskv]

A lightly used, no shine g80-5000?

[Photekq]

A lightly used, no shine g80-5000?

What layout?

edit:get rekt epzy

[epzy]

A lightly used, no shine g80-5000?

Which layout?

Sniped...

[Damonskv]

ANSI

[Photekq]

ANSI

Does it include the box? Does it have cyrillic characters or not (I only ask because you're in Russia)?

[Damonskv]

ANSI

Does it include the box? Does it have cyrillic characters or not (I only ask because you're in Russia)?

Without box and cyrillic alphas

[Photekq]

That's a very rare board you have there. It's very hard to put a value on it since it has cyrillic characters. Nobody has ever sold one of those on GH/DT/ebay.

A used, good condition ANSI 5000 sold for $550 on ebay very recently. It came with a box but did not have cyrillic characters.

The cyrillic characters will add quite some value to it, but the lack of a box will reduce its value.

Somewhere around $600-750 I would say.

EDIT : Sorry, the way you phrased it could mean that it's WITHOUT cyrillic alphas, or that it has cyrillic alphas. My bad if I misunderstood.

[Damonskv]

That's a very rare board you have there. It's very hard to put a value on it since it has cyrillic characters. Nobody has ever sold one of those on GH/DT/ebay.

A used, good condition ANSI 5000 sold for $550 on ebay very recently. It came with a box but did not have cyrillic characters.

The cyrillic characters will add quite some value to it, but the lack of a box will reduce its value.

Somewhere around $600-750 I would say.

EDIT : Sorry, the way you phrased it could mean that it's WITHOUT cyrillic alphas, or that it has cyrillic alphas. My bad if I misunderstood.

Thanks for answer. You right it my mistake: without box, with cyrillic keycaps

[OnTheBrink]

What is an Apple Keyboard II (Alps) worth? It is the last mechanical keyboard made by Apple before switching to rubber dome.

I just sold a really nice one with dampened cream Alps on ebay for $35 + shipping and a fairly nice one with dampened whites for $29 + shipping.

Cool, I just picked up one from the Goodwill website for $5. It looks to be in great condition. Maybe I'll just keeps it as a collectors item. I donate a lot there and figured I'd check it for some old mechanical keyboards people think are junk.

[Dubsgalore]

A lightly used, no shine g80-5000?

If you have what I think you have, then we are one of two to own the same board ) PM'd

[fohat.digs]

It looks to be in great condition. Maybe I'll just keeps it as a collectors item.

I used to run into those at second-hand shops every few months, but haven't seen one in at least a year now. The original AEK is far more desirable, in my opinion, but much less common (there looks to be a really nice one on ebay now for about $80), than the AEK2, but some people feel the opposite.

They will not work without an ADB-to-USB adapter ($25 on ebay) and are very prone to yellowing. I have gotten several with dead switches, but that is not too hard to fix.

Those old Apple PBT keys are the best Alps keys ever made, in my opinion, but the stupid legends and bizarre layout configurations make them hard to use on other boards unless you are OK with a mis-match.

[OnTheBrink]

It looks to be in great condition. Maybe I'll just keeps it as a collectors item.

I used to run into those at second-hand shops every few months, but haven't seen one in at least a year now. The original AEK is far more desirable, in my opinion, but much less common (there looks to be a really nice one on ebay now for about $80), than the AEK2, but some people feel the opposite.

They will not work without an ADB-to-USB adapter ($25 on ebay) and are very prone to yellowing. I have gotten several with dead switches, but that is not too hard to fix.

Those old Apple PBT keys are the best Alps keys ever made, in my opinion, but the stupid legends and bizarre layout configurations make them hard to use on other boards unless you are OK with a mis-match.

On an old school board, I'd probably be fine with a mismatch. I always wanted to try Alps too, so this will be fun.

Actually, I think I might have tried the switches when I was younger and before I knew what I was doing. I remember my father having the original desktop PC. Damn I wish we kept that keyboard. We probably threw out the damn thing too.

[nhwhaup]

I have a cherry red switch Poker keyboard with two sets of keys - Black and also white ones with engraved but non colored letters.  This keyboard has really been rarely used - original box included.  What would be a fair going price?

[hwood34]

Realforce 101 caps, moderately used, spacebar has some shine