I'm busy all of April but after that i'd drive up for a meet up.
idk I'll come let me know if you want help with anything. 0 ideas to contribute thus far
PC Cafe/Bar?
Hey we can hang out at my workshop :) 10 min walk from Dundas West.
Hey we can hang out at my workshop :) 10 min walk from Dundas West.
Does it smell of fresh leather? :)
Hey we can hang out at my workshop :) 10 min walk from Dundas West.
Does it smell of fresh leather? :)
lol that just means we'll all spend more money.
But I like his plan. :P
Things are falling into place faster than I thought LOL.
Halverson what's the earliest you can make your appearance?
Pretty much the end of April after the 25. A little bit later would be better. If it needs to happen sooner than later though, don't try to make it work just for me.
Hey we can hang out at my workshop :) 10 min walk from Dundas West.
I am out on the weekend of may 9th so please don't have anything going on there.
Other than that I should be good.
Sounds bad. How can I be in Chicago and Toronto at the same time??
I'd *love* to come visit to see Noko's shop or Matias :(.
I mean if it's in a different country I don't see why it would matter lol. I don't think there's many people who are planning on flying out to TO from the states. I was just complaining 'cause I'm selfish and I want to go to both.
EDIT: I would love if it was done on a weekend, otherwise I cannot attend. Period. My job is insane.
Pretty much the end of April after the 25. A little bit later would be better. If it needs to happen sooner than later though, don't try to make it work just for me.
Yeah no worries we'll probably aim for mid May then, can't party without pope Halverson. :P
And it's not like we'll die if we can't have keyboard party earlier.... I think.... maybe.... LOL
This will give everyone a chance to buy more keyboards before then.Hey we can hang out at my workshop :) 10 min walk from Dundas West.
Also Noko are you sure you're ok about us using your space? Because if you are that would be awesome!
I can bring food to feed everyone. :D
Pretty much the end of April after the 25. A little bit later would be better. If it needs to happen sooner than later though, don't try to make it work just for me.
Yeah no worries we'll probably aim for mid May then, can't party without pope Halverson. :P
And it's not like we'll die if we can't have keyboard party earlier.... I think.... maybe.... LOL
This will give everyone a chance to buy more keyboards before then.Hey we can hang out at my workshop :) 10 min walk from Dundas West.
Also Noko are you sure you're ok about us using your space? Because if you are that would be awesome!
I can bring food to feed everyone. :D
Heh as long as it's not like over 15 people, I think that's where it would start to be pretty crowded. I've got plenty of tables. I can open it up on the weekend too cause I makes the rules :p
Can we all get white girl wasted? :O
Can we all get white girl wasted? :O
Only if we listen to that really catchy Lil' Jon song on repeat.
Sounds bad. How can I be in Chicago and Toronto at the same time??
I'd *love* to come visit to see Noko's shop or Matias :(.
Heh as long as it's not like over 15 people, I think that's where it would start to be pretty crowded. I've got plenty of tables. I can open it up on the weekend too cause I makes the rules :p
Yup - weekends which are not this one - and particularly locations near dundas west (let me guess - one of the studios down sterling. :P)
If it takes long enough, there might even be fresh toys to show off re: F controller stuff.
looking forward.
dfj
is this meetup open to only keyboard pros? i'm fairly new to the game and haven't even started modding yet, but it'd be cool to chill with some fellow enthusiasts and maybe learn a few tricks to get me started on modding?
is this meetup open to only keyboard pros? i'm fairly new to the game and haven't even started modding yet, but it'd be cool to chill with some fellow enthusiasts and maybe learn a few tricks to get me started on modding?
Open to all!
lol so June good for everyone? Also CPTBadAss if it's in June then can you come?
is this meetup open to only keyboard pros? i'm fairly new to the game and haven't even started modding yet, but it'd be cool to chill with some fellow enthusiasts and maybe learn a few tricks to get me started on modding?
And screw that cptbadass guy, I know him, he's always busy! :D
Should we start a form to fill out for availability?
It would be a bit of a mess, but sifting through a messy pile of garbage in a form is better than trying to find it scattered throughout the thread.
Not sure if I'm available yet. New job and all. I'll have to wait and see closer to the date of the meet
I'll ask if truecustom wants to come as well
Seriously please don't schedule this around me. I'm just being selfish. :|
Haha. You took my statement literally. I love it.
This will be my first meetup in Canada. Are we all supposed to bring bags of milk and poutine?
Haha. You took my statement literally. I love it.
This will be my first meetup in Canada. Are we all supposed to bring bags of milk and poutine?
Bags of milk are an Ontario thing, I didn't grow up with such ****ery. Just bring beer, dude. Copious amounts of beer. Micro brewed IPAs preferably.
It's inevitable that some people won't make the chosen weekend. May as well pick a few dates then see which one is best for the majority. And screw that cptbadass guy, I know him, he's always busy! :D
Hi Hyde,
Please put me on the pending list.
I will be out of Canada for a week or so in June but all the other weekends work for me given a notice in advance.
Currently living in downtown Toronto, can carpool 3 or 4 if necessary.
Can't edit the doc on my phone cuz sick but I pretty much don't do anything so I should be able to make it whenever.
Hi Hyde,
Please put me on the pending list.
I will be out of Canada for a week or so in June but all the other weekends work for me given a notice in advance.
Currently living in downtown Toronto, can carpool 3 or 4 if necessary.
lol cool I'll add you to the list.Can't edit the doc on my phone cuz sick but I pretty much don't do anything so I should be able to make it whenever.
I'll update for you. But good to have lots of free time. :P
Voted, good sir! :thumb:
Voted, good sir! :thumb:
LOL holycrap you're fast, you even voted before I did.
WCS finals are in Toronto June 26-28. Maybe do a geekhack cheering section? :thumb:
WCS finals are in Toronto June 26-28. Maybe do a geekhack cheering section? :thumb:
Oh really!?!? I might be able to get a few tickets for you guys for anyone that's interested.
WCS finals are in Toronto June 26-28. Maybe do a geekhack cheering section? :thumb:
Oh really!?!? I might be able to get a few tickets for you guys for anyone that's interested.
my kid brother and i would def be interested. how much do they go for usually?
WCS finals are in Toronto June 26-28. Maybe do a geekhack cheering section? :thumb:
Oh really!?!? I might be able to get a few tickets for you guys for anyone that's interested.
my kid brother and i would def be interested. how much do they go for usually?
I'm going to be talking to the ESL CEO near the end of this month. I'll ask him and see what he says. Blizzcon is around $99
Guys we need more votes, I feel weird deciding this on 2 vote over 1 vote win LOL.
Whoever still hasn't voted yet please do it. :P
So we going to plan out what boards people are going to bring?
I don't have much to bring, BUT, hopefully my Planck that my friend built will be here by then, and I can bring that, haha.
If someone could bring a switch tester (specifically with a green switch), that would be really cool. ;)
I can bring my modded RealForce 104U and Type Heaven for those that are interested to see what the difference are.
I can also bring my Poker II with TEX aluminum case lol.
After that I don't have anything that really stands out. :P
I can bring my modded RealForce 104U and Type Heaven for those that are interested to see what the difference are.
I can also bring my Poker II with TEX aluminum case lol.
After that I don't have anything that really stands out. :P
I've always wanted to try Topre, actually, I've never used them before. *hides from judging glances*
I'll bring my Poker II with TEX alu case if you bring yours!
Hopefully my GMKs will be in by then and I can bring in the Triumph, Hyperfuse, Dolch family as well.
Also, if CPTBadAss does make it, I want to try a bird, let's say, of Pelikan decent. ;)Have pens, will try and travel :D
You gonna bring your blue alps as well?Also, if CPTBadAss does make it, I want to try a bird, let's say, of Pelikan decent. ;)Have pens, will try and travel :D
You gonna bring your blue alps as well?Also, if CPTBadAss does make it, I want to try a bird, let's say, of Pelikan decent. ;)Have pens, will try and travel :D
Or am I going to have to do that one?
You gonna bring your blue alps as well?Also, if CPTBadAss does make it, I want to try a bird, let's say, of Pelikan decent. ;)Have pens, will try and travel :D
Or am I going to have to do that one?
If I am able to come, I can bring two keyboards and all my pens since they don't take up much room.
well your kishy is obviously going to be the hot topic of the meet if you aren't afraid to risk it.
Keyboards? This meetup is about keyboards?
Keyboards? This meetup is about keyboards?
we could hit up a bar, if everyone brings their fake ids.
Keyboards? This meetup is about keyboards?
we could hit up a bar, if everyone brings their fake ids.
Yo Hyde, I kind of want to see what cherry ML is like.
Would you be opposed to bringing that in?
I'll hopefully have my KMAC Mini and JD45 by then so I can bring those!
On an on-topic in an off-topic thread.
Does ANYONE have extra Blue/Clear/Anything Tactile switches around? I'm willing to buy around 50 (I just don't want to wait for shipping online).
I'll hopefully have my KMAC Mini and JD45 by then so I can bring those!
On an on-topic in an off-topic thread.
Does ANYONE have extra Blue/Clear/Anything Tactile switches around? I'm willing to buy around 50 (I just don't want to wait for shipping online).
I have about 87 of them, but they're in an older housing. I swapped housings with ones from my vintage blacks, so the click is a lot softer.
On topic-
If I bring my KMAC2, but I'm extremely picky about people touching and whatnot...what do I do?! My keyboard is like mint mint LOL.
Simple, you give me the PCB.
Simple, you give me the PCB.
All my KMAC PCBs are gone. I do have one GON PCB left, but I'm saving that when I acquire my second KMAC2 :)).
If anyone knows of something I have they wanna see/try, lemme know!
If anyone knows of something I have they wanna see/try, lemme know!
You have a Flickr or something?
I don't see anything in your Sig or recall you making a thread of your stuff.
Lock it up in one of those glass display cases.Oh! I get a complimentary glass display case with a kmac 2? :p
Soooooooo it's been another week or so, the votes seems to have settled on:
June - 1
July - 2
Either - 9
Should we declare July as the winner? Even though it's only won by 1 vote?
How does Saturday July 11 sound for everyone? I figure I need to start putting some dates down otherwise we'll never reach a conclusion. :P
Again this is not set in stone, if you still have any concern please speak up then I can shift the date.
As for adrl I'm sorry that I understand you can only do September.
But I was checking the availability log, and it seems like a few of us are busy on September also on top of it September just seem soooooooooo far away LOL.
I feel like June/July is still a reasonable date and we don't have to wait toooooo long.
So what do you guys think?
Just found this thread... where do I sign up? :D
But what happens to the ring??MoreJust found this thread... where do I sign up? :D
First you have to travel to the smouldering volcano in New Zealand where the ring is disposed of.
Then inside the volcano look to your right there will be a board that says "Toronto Meet 2015 Sign Up Here".
That or I'll just put your name down and you're signed up. :P
I'm guessing we don't have a place because we're >15 people right now?
I'm guessing we don't have a place because we're >15 people right now?
Was that too many for noko's place?
Hyde, have you tried to contact Matias?
I'm guessing we don't have a place because we're >15 people right now?
Was that too many for noko's place?
Hyde, have you tried to contact Matias?
I'm trying to talk to Noko to see if we should still do it at his place or find an alternative. Because even though it's bigger than 15 now but a lot are pending, so not everyone will show up.
I'll do a proper number count when we're closer to the date and I might start looking at alternatives just in case.
And no I haven't contact them yet since I think Matias only do weekdays and weekend probably works better for everyone?
Unless people can do weekdays like book 1 day off work or something then I can contact them.
Though I was thinking if we should invite them to our meet if we end up doing at our location. :P
What do you guys think?
Yea let's just toss them an invitation to come hang out.
I would love to have guys from Matias come over.
I wonder what they have in their vintage ALPS collection...
good with me
Okay I've got the OK from Noko, also I left Matias a message let's see what they say haha.
At the moment I'm thinking we can meet up at 2:00 pm this way we can geek out for a few hours then afterwards we can all have dinner/drinks after. :D
What do you guys think?
This sounds really great. We'll definitely be there -- and bring new stuff to try. :)
We may even have our new keycap tooling done by then.
This sounds really great. We'll definitely be there -- and bring new stuff to try. :)
We may even have our new keycap tooling done by then.
BREAKING NEWS !!!
Hey guys as you've noticed so that Edgar and Steve from Matias will be joining us (yayyyyy)!!!!
They also offer their new warehouse as another option for us to host the meet up. :D
As I've mentioned in the previous post that Noko gave us the green light on using his place too, and both are great choices.
In a perfect world I'd like to visit both places but I think that would be too much travel in one day.
Noko's place is by Dundas West station (Bloor W and Dundas W) so it's easier accessible to subway, also we get to see leather LOL. I'm guessing the new Matias warehouse can accommodate a bigger group and they also have a customer showroom, but it's located at Aurora (between Toronto and Newmarket) so we'd have to arrange carpool.
Does anyone have any opinion/preference regarding this matter?
Again I really appreciate both parties on their generous offer. You guys rock! :D
Meet up in aurora, after party at noko's?
There's street parking (no meters or signs, so I guess free?) plus a lot at my place.
But--I think Matias is the better call though if they're okay with the weekend opening, just cause I have no AC at this place, and in July that's going to suck exponentially the more people we have :o
There's street parking (no meters or signs, so I guess free?) plus a lot at my place.
But--I think Matias is the better call though if they're okay with the weekend opening, just cause I have no AC at this place, and in July that's going to suck exponentially the more people we have :o
No AC sounds terrible.
Just means we need more beer coolers at the afterparty, right? :p
Okay cool sounds like the majority would prefer Aurora, I will send another e-mail to Steve tonight to see if they can open it up for us on the originally proposed date and time.
I'll update you guys once I find out.
:D
forgot I'm old enough to (legally) drink now...
Okay cool sounds like the majority would prefer Aurora, I will send another e-mail to Steve tonight to see if they can open it up for us on the originally proposed date and time.
I'll update you guys once I find out.
:D
And then we party down! Korean BBQ? Non stop shots?
I wouldn't mind people bringing their female friends as well. :)
I wouldn't mind people bringing their female friends as well. :)
I gatta hide my gf from you then... ;)
Assuming I can manage to solder and test them before the meetup I can bring a jd40, planck, and infinity.
Also, novatouch, hhkb, kensington slimblade. Let me know if anyone wants to see those, or if you were thinking about bringing one of the aforementioned so we don't overlap.
BTW, we'll be showing a few design prototypes, to get feedback on whether they should go into production or not -- so should be a treat for anyone who can make it.
I wouldn't mind people bringing their female friends as well. :)
I gatta hide my gf from you then... ;)
lol I think all the girls that showed up last year were all people's g/f.
I mean I'm brining my fiance too but that probably doesn't help you haha. I'll see if she has single friends that are into keyboards. :PAssuming I can manage to solder and test them before the meetup I can bring a jd40, planck, and infinity.
Also, novatouch, hhkb, kensington slimblade. Let me know if anyone wants to see those, or if you were thinking about bringing one of the aforementioned so we don't overlap.
I was bugging Halverson about HHKB, but if you can bring the planck and novatouch that would be cool. :DBTW, we'll be showing a few design prototypes, to get feedback on whether they should go into production or not -- so should be a treat for anyone who can make it.
HOLYCRAP prototypes and beta tests are always fun !!! :D
You need to let us test your products more often haha.
I wouldn't mind people bringing their female friends as well. :)
I gatta hide my gf from you then... ;)
lol I think all the girls that showed up last year were all people's g/f.
I mean I'm brining my fiance too but that probably doesn't help you haha. I'll see if she has single friends that are into keyboards. :PAssuming I can manage to solder and test them before the meetup I can bring a jd40, planck, and infinity.
Also, novatouch, hhkb, kensington slimblade. Let me know if anyone wants to see those, or if you were thinking about bringing one of the aforementioned so we don't overlap.
I was bugging Halverson about HHKB, but if you can bring the planck and novatouch that would be cool. :DBTW, we'll be showing a few design prototypes, to get feedback on whether they should go into production or not -- so should be a treat for anyone who can make it.
HOLYCRAP prototypes and beta tests are always fun !!! :D
You need to let us test your products more often haha.
Or like how you expected me to be a girl :P
I guess I can bring a silent 30g hhkb still. Maybe I'll cover it entirely in novelty caps :D
I wouldn't mind people bringing their female friends as well. :)
I gatta hide my gf from you then... ;)
lol I think all the girls that showed up last year were all people's g/f.
I mean I'm brining my fiance too but that probably doesn't help you haha. I'll see if she has single friends that are into keyboards. :PAssuming I can manage to solder and test them before the meetup I can bring a jd40, planck, and infinity.
Also, novatouch, hhkb, kensington slimblade. Let me know if anyone wants to see those, or if you were thinking about bringing one of the aforementioned so we don't overlap.
I was bugging Halverson about HHKB, but if you can bring the planck and novatouch that would be cool. :DBTW, we'll be showing a few design prototypes, to get feedback on whether they should go into production or not -- so should be a treat for anyone who can make it.
HOLYCRAP prototypes and beta tests are always fun !!! :D
You need to let us test your products more often haha.
Or like how you expected me to be a girl :P
I guess I can bring a silent 30g hhkb still. Maybe I'll cover it entirely in novelty caps :D
You're... not? Well I am! :)
Or like how you expected me to be a girl :P
I guess I can bring a silent 30g hhkb still. Maybe I'll cover it entirely in novelty caps :D
Though the carpool sheet isn't posted, I'd be willing to split gas/carpool with a few folks in my small ass Ford Focus five seater. I'd prefer to pickup at a major station/mall though that's not downtown, I'm not a fan of driving in DT Toronto especially with Pan Ams on around that time.
You're... not? Well I am! :)Uh oh! Better not tell Elton :p
I plan to be there.
Hyde, I think you should add Toronto into the heading in case there might be others who may be interested in attending!
Keyboard list is not publicly editable.
Do we have a timeline for when the tour is happening, etc? I have another event that afternoon that I'd forgotten about, but I need to go to. Still hoping to be able to come to this, but an approximate itinerary would be useful.
Keyboard list is not publicly editable.
Do we have a timeline for when the tour is happening, etc? I have another event that afternoon that I'd forgotten about, but I need to go to. Still hoping to be able to come to this, but an approximate itinerary would be useful.
Fixed !!!
They will serve pizza at 1:00 pm and we can eat pizza / hangout until the main event that start at 2:00 pm. Assuming the main event will last 2-3 hours then we can probably all go eat dinner / drinks after.
Realistically I think we'll be done around 7:00 -8:00 pm.
We're too old to party late. :P
I'll plan to attend. I have nothing noteworthy to bring.
just checking again since didn't get a reply earlier: is it all right if I bring my girl, I know it's a bit late, not sure if there's still enough space?More than welcome to bring your girlfriend to join us. I'm getting off at work at noon and can pick some up at Bay St and College St.
this makes me available for subway stations around finch/don mills for carpooling of about 2 people (unless 3 wanna squeeze in the backseat). don mills is probably better since there's more parking for me to wait at.
If not enough space I'll just tell her to suck it up (no bad jokes please :)) )
just checking again since didn't get a reply earlier: is it all right if I bring my girl, I know it's a bit late, not sure if there's still enough space?More than welcome to bring your girlfriend to join us. I'm getting off at work at noon and can pick some up at Bay St and College St.
this makes me available for subway stations around finch/don mills for carpooling of about 2 people (unless 3 wanna squeeze in the backseat). don mills is probably better since there's more parking for me to wait at.
If not enough space I'll just tell her to suck it up (no bad jokes please :)) )
lol no one signed up to any cars yet.
No one wants to be the first. :P
LOL and swaglord yolomancer, is that you sifo? It's sad how I can recognize people by their keyboards.
lol no one signed up to any cars yet.
No one wants to be the first. :P
lol no one signed up to any cars yet.
No one wants to be the first. :P
Maybe it's fear that one of the new guys offering (like me) are actually closet serial killers.
A good proportion of serial killers had homosexual tendencies...lol no one signed up to any cars yet.
No one wants to be the first.
Maybe it's fear that one of the new guys offering (like me) are actually closet serial killers.
Wait till they come out of the closet..... wait.....
TL;DNR
- still need a ride, so - where do I sign?
dfj
Holycrap I didn't realize we're already 3 weeks away from the event. Man time really went by fast.
I think after this week I will contact Matias again just to confirm that everything is still good to go. In the mean time everyone try to get your car situation sorted out and buy more keyboards. :P
Oh I noticed on the keyboard sheet there are 2 people with NovaTouch, can at least 1 of you bring it? I'm curious as to the difference between NovaTouch and Realforce, thanks !
(If you can't it's not a huge deal either, I won't ban you from the trip LOL)
I'm out for this. Can't swing it. Would love to go but not this time. Just a heads up. I hope you all have an amazing time and please take many pictures. More importantly, eat a lot of food :D
I forget, was I supposed to bring anything? The less the better!
As for car, I have my car but it's unknown if I'll have a companion(which is the limit I want to put in my car). Then I'll prob be parking at my friends and public transport making my way to the after party ;)
I'm out for this. Can't swing it. Would love to go but not this time. Just a heads up. I hope you all have an amazing time and please take many pictures. More importantly, eat a lot of food :D
lol no worries there's always next year. And thank I'll make sure I bring my camera that day haha.I forget, was I supposed to bring anything? The less the better!
As for car, I have my car but it's unknown if I'll have a companion(which is the limit I want to put in my car). Then I'll prob be parking at my friends and public transport making my way to the after party ;)
I was going to ask you to bring HHKB but I think I saw HHKB on the list somewhere so it's up to you lol.
Are you planning ahead so you can get super super drunk lol?
I was ready, GH up or not! Hyde, you want my phone # just in case? Just ask in the mass pm if so and I'll reply with it.
I'm hoping to bring the random dude I brought last time. Hehe
you guys just had to hold this after i moved away... thanks alot!
I'm hoping to bring the random dude I brought last time. Hehe
rofl i remember him
you guys just had to hold this after i moved away... thanks alot!
blame trigun0x2, he made an offer I cannot refuse.
trigun0x2 "So I'm thinking to host another keyboard meet. Sifo said you hosted it last time, do you want to do it again?"
hyde "Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm........................"
*thinking long and hard for 0.2 seconds*
hyde "Ok"
*end of story*
lolI'm hoping to bring the random dude I brought last time. Hehe
rofl i remember him
Haha nice yeah I remember him too. Did you manage to officially convert him to the keyboard club yet. :P
you guys just had to hold this after i moved away... thanks alot!
blame trigun0x2, he made an offer I cannot refuse.
trigun0x2 "So I'm thinking to host another keyboard meet. Sifo said you hosted it last time, do you want to do it again?"
hyde "Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm........................"
*thinking long and hard for 0.2 seconds*
hyde "Ok"
*end of story*
lolI'm hoping to bring the random dude I brought last time. Hehe
rofl i remember him
Haha nice yeah I remember him too. Did you manage to officially convert him to the keyboard club yet. :P
Oh not at all! He's either off Friday or Saturday. So if it's Saturday, maybe he'll join just for kicks. Otherwise we will cruise Toronto on Friday, yeee.
you guys just had to hold this after i moved away... thanks alot!
blame trigun0x2, he made an offer I cannot refuse.
trigun0x2 "So I'm thinking to host another keyboard meet. Sifo said you hosted it last time, do you want to do it again?"
hyde "Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm........................"
*thinking long and hard for 0.2 seconds*
hyde "Ok"
*end of story*
lolI'm hoping to bring the random dude I brought last time. Hehe
rofl i remember him
Haha nice yeah I remember him too. Did you manage to officially convert him to the keyboard club yet. :P
Oh not at all! He's either off Friday or Saturday. So if it's Saturday, maybe he'll join just for kicks. Otherwise we will cruise Toronto on Friday, yeee.
Bring me pizza
you guys just had to hold this after i moved away... thanks alot!
blame trigun0x2, he made an offer I cannot refuse.
trigun0x2 "So I'm thinking to host another keyboard meet. Sifo said you hosted it last time, do you want to do it again?"
hyde "Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm........................"
*thinking long and hard for 0.2 seconds*
hyde "Ok"
*end of story*
lolI'm hoping to bring the random dude I brought last time. Hehe
rofl i remember him
Haha nice yeah I remember him too. Did you manage to officially convert him to the keyboard club yet. :P
Oh not at all! He's either off Friday or Saturday. So if it's Saturday, maybe he'll join just for kicks. Otherwise we will cruise Toronto on Friday, yeee.
Bring me pizza
Gimme monay
well this sounds awesome. i'm going to try to come. i dont think i have anything noteworthy to bring (filco/browns/pegasus hoof/original dolch dsa, qfr/blues/blank dsa, leopold fc200/blues/oem) but would love to try SA, DCS, topre, lightsaver, ANY G80-1800. Super interested in seeing what matias has to show off as well.
If it makes it any more appealing, I'm a girl, woooo. :P
Thanks!
Long shot, but does anyone have 2 seats in their car for me and a friend from Waterloo, ON? My ride isn't able to grab me anymore. :)
If it makes it any more appealing, I'm a girl, woooo. :P
Thanks!
Long shot, but does anyone have 2 seats in their car for me and a friend from Waterloo, ON? My ride isn't able to grab me anymore. :)
If it makes it any more appealing, I'm a girl, woooo. :P
Thanks!
ROFL what a way to sell;)
But you don't mention if your friend is a girl, -1 points!Shhh... no one will notice...
Hope you folks can find a way over! Take the ride in and figure out how to get back after.
I can provide a ride there for you and your friend from Waterloo on Sat morning, but I will be heading back to my place in Ajax for the rest of the weekend, so I wouldn't be able to drive you back.PM sent!
Also, I have to pick up Frosty from Don Mills on the way as well, so there'll be 4 folks in the car at some point.
If that works, shoot me a PM.
I think I'm ready for the meet.Show Image(http://i.imgur.com/OicNWa4.jpg?1)
I might be bringing more boards than the sheet says...
Frosty is going to leave with a new custom wrist rest too! :D
I'll bring it in a box with bubble wrap though, make sure it doesn't get mangled in that there bag.
Frosty is going to leave with a new custom wrist rest too! :D
I'll bring it in a box with bubble wrap though, make sure it doesn't get mangled in that there bag.
I'll have another backpack on me as well for the wrist rest. It should probably be fine to carry in my seat if I keep it on my lap or at my feet.
That rest would honestly be more valuable than any of the boards I have.
I literally can't fit anything else in there either...
I'm not using the word "literally" in that new-age teenage dip**** sense either.
The bag is pretty much a rectangular crate and just as solid as one with how much I stuffed the thing.
I'll get dimensions in the morning for you.
see u guys tomorrow
Oh I forgot to mention. Remember to leave a bit earlier than usual since there might be more traffic due to Pan Am Games.
Otherwise I'll see everyone tomorrow!!!
Oh I forgot to mention. Remember to leave a bit earlier than usual since there might be more traffic due to Pan Am Games.
Otherwise I'll see everyone tomorrow!!!
Oh I forgot to mention. Remember to leave a bit earlier than usual since there might be more traffic due to Pan Am Games.
Otherwise I'll see everyone tomorrow!!!
HOV lane ftw! carpoolers unite.
i feel sorry for those using gardiner/dvp though.
Yea **** these games! My buddies place is next door to the damn center.
So I'm wondering, what's the schedule like for tomorrow? Or we just meeting up then seeing how it goes?
If anyone wants to see the boards I'm bringing (I recall someone asking about the novatouch specifically), I can haul them out during the social time. I unfortunately won't be able to stay for the tour because I'm going out in the afternoon in celebration of my mom's 50th birthday.
If anyone wants to see the boards I'm bringing (I recall someone asking about the novatouch specifically), I can haul them out during the social time. I unfortunately won't be able to stay for the tour because I'm going out in the afternoon in celebration of my mom's 50th birthday.
Anybody driving from montreal?
coming up... party don't start til I walk in
Yay. And with yet a bittersweet goodbye, the meetup is over.
Yay. And with yet a bittersweet goodbye, the meetup is over.
Don't miss me too much.
I don't think I met sifo :O
I don't think I met sifo :O
You came at the very end of the introductions. Sifo was the one sporting Gunnar glasses.
had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
I don't think I met sifo :O
You came at the very end of the introductions. Sifo was the one sporting Gunnar glasses.
Oh cool. Yeah those guys stayed on the opposite end of the room from us haha!
Ergo and stock clears and greens still best for me... but I really loved user18's Novatouch. It was like Saul on the road to Damascus. If only they made 55g...had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
Guys, I tried topre for the first time. It was crappy. What.
had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
Guys, I tried topre for the first time. It was crappy. What.
had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
Guys, I tried topre for the first time. It was crappy. What.
I know... You offended me.
I think it's just denial...
I really liked his Novatouch. Don't judge me...had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
Guys, I tried topre for the first time. It was crappy. What.
I know... You offended me.
I think it's just denial...
Which board though? If it was a Realforce, I totally get it.
HHKB is love. HHKB is life.
had an amazing time and was great to see you all in person! the only bad thing is that i now really like topre and have to constantly fight the urge to buy one.
T_T
There is no fight to be had. It's hopeless. Surrender to the topre gods.
Guys, I tried topre for the first time. It was crappy. What.
I know... You offended me.
I think it's just denial...
Which board though? If it was a Realforce, I totally get it.
HHKB is love. HHKB is life.
Thanks for planning this meetup!
Although I'm not real a contributor to the forum, this meetup has ignited the flame once more! Like a wise man said today, "the first step is to be ready to throw your wallet", my response: the world of keyboards has sucked my boyfriend already... I AM READY!! O____O
Thanks for planning this meetup!
Although I'm not real a contributor to the forum, this meetup has ignited the flame once more! Like a wise man said today, "the first step is to be ready to throw your wallet", my response: the world of keyboards has sucked my boyfriend already... I AM READY!! O____O
lol yes it was really fun meeting everyone today.
Though guessing what switches were in a keyboard was a bit tricky, next time I'll do name tag + keyboard tag so we know what we're looking at.
Oh though I have to say NovaTouch impressed me too. It wasn't as bad as people claimed.
Also I'll put pictures up tomorrow, too sleepy tonight lol.
Was fun, nice to put faces to names and all that :]
I'm going to go ahead and claim that I hold the award for "Most Smelled Keyboard of 2015" now.
Was fun, nice to put faces to names and all that :]
well that was fun! thanks for letting me touch your stuff.Glad you like them :thumb: 62g clears best clears best switch
i found my new favourite switch. 62g clear mod. THanks KEVIN!
well that was fun! thanks for letting me touch your stuff.Glad you like them :thumb: 62g clears best clears best switch
i found my new favourite switch. 62g clear mod. THanks KEVIN!
Had a lot of fun today! Thanks everyone for sharing their keyboards and knowledge with everyone :)
Coolest board definitely goes to platypus' Atreus, dat wood smell
well that was fun! thanks for letting me touch your stuff.Glad you like them :thumb: 62g clears best clears best switch
i found my new favourite switch. 62g clear mod. THanks KEVIN!
Had a lot of fun today! Thanks everyone for sharing their keyboards and knowledge with everyone :)
Coolest board definitely goes to platypus' Atreus, dat wood smell
You have more than 4 posts.
Liar.
Or maybe that was someone else who said they had 4 posts
I don't think I met sifo :O
Aw I'm sorry for not saying hi :(. Your rests were really nice, wish I could afford...
Thanks so much for having us! I know a lot of us were expecting you guys at dinner, so you probably missed a lot of thank yous I'm sure everyone wanted to say.
No thank-yous necessary. We really enjoyed the day!
QuoteAw I'm sorry for not saying hi :(. Your rests were really nice, wish I could afford...
Truly - but noko also brought some samples (with 'imperfections', supposedly) to give out!
(one of which I'm using right now, and now I'm going to order more, and show my friends; if it wasn't so awesome I'd feel a tiny bit manipulated.) ;}
chuffed,
dfj
Thanks so much for having us! I know a lot of us were expecting you guys at dinner, so you probably missed a lot of thank yous I'm sure everyone wanted to say.
No thank-yous necessary. We really enjoyed the day!
matias thank you so much for including us in the discussion of your new products. was super interesting to see and i know i'm excited for that TK board.
slip84 sorry again for forgetting that spacebar. if you PM me your address i'll toss it in the mail tomorrow.
noko your leather goods were impressive. the one you made for the atreus was INCREDIBLE. i saw that you do custom work, i might nab something in the coming weeks. i'm with you on the topre's. although, slip84's felt really nice with the dental band mod.
elton thanks for the stabs! 2 of the 3 builds i'm working on were missing stabs and I really didn't want to order costars from wasd. thank you thank you.
sifo were you the one who sold me the alpsulator? my buddy is loving it.
Thanks so much for having us! I know a lot of us were expecting you guys at dinner, so you probably missed a lot of thank yous I'm sure everyone wanted to say.
No thank-yous necessary. We really enjoyed the day!
matias thank you so much for including us in the discussion of your new products. was super interesting to see and i know i'm excited for that TK board.
slip84 sorry again for forgetting that spacebar. if you PM me your address i'll toss it in the mail tomorrow.
noko your leather goods were impressive. the one you made for the atreus was INCREDIBLE. i saw that you do custom work, i might nab something in the coming weeks. i'm with you on the topre's. although, slip84's felt really nice with the dental band mod.
elton thanks for the stabs! 2 of the 3 builds i'm working on were missing stabs and I really didn't want to order costars from wasd. thank you thank you.
sifo were you the one who sold me the alpsulator? my buddy is loving it.
QuoteAw I'm sorry for not saying hi :(. Your rests were really nice, wish I could afford...
Truly - but noko also brought some samples (with 'imperfections', supposedly) to give out!
(one of which I'm using right now, and now I'm going to order more, and show my friends; if it wasn't so awesome I'd feel a tiny bit manipulated.) ;}
chuffed,
dfj
Ah, I know you took one but didn't know more were avail to take home.
nice seeing everyone, sorry for being so boring this time round, was really tired.
my only complaint : no sushi
(Attachment Link)
god damn sifo why do you own jorts
Should have gone full Canadian summer tuxedo with a jean vest(Attachment Link)
People really liked my boards huh..god damn sifo why do you own jorts
**** I didn't even realize they looked that bad, they're from like 6 years ago when they were cool...
Sifo's blue is still *** to type on, better now even, after being tuned, lubed, etc...
One of the serious contenders should one ever need to use a keyboard quietly.
Topre has all manner of options, but I have great difficultly gaming on them.
Now, finally, there are Matias ALPS, and a number of clones too, that can do quiet and tactile - but tuned clears are nothing to sneer at.
Regardless, I'll always remember that *particular* board as the first quiet MX I didn't hate. : P
my $0.05
dfj
Hyde, thanks for posting the awesome pics! ^__^
We could do something less formal, casual get together over some good food :thumb:
Thanks to Hyde and his girlfriend for taking these awesome photos!
Sifo's GON and user18's novatouch are probably my favourite boards in terms of aesthetics... which is like my only criteria anyway :P
Hyde, thanks for posting the awesome pics! ^__^
We could do something less formal, casual get together over some good food :thumb:
Yeah: I'm all for informal, (and food). I suggested such as well to a few people when we were at matias, though I don't remember who.
We have a mess of people near downtown too - hopefully enough to kinda hint things more corewards for us peeps without cars. ; p
Mebbe not enough phone numbers yet, but there's still PM, posts etc...
Also, for an informal gathering I'd quite rather people introduced themselves here somehow before crashing our tea. : P
too hot, must naps,
dfj
PS: sifo: glad you caught the .05 - I was afraid noone would laugh. :}
Hyde, I'm down for BOTH LOL!!! I'm down for AYCE sushi and some bubble tea...mmmm...!
Hahaha nice sounds like a plan ! :D
Though I'm busy the next 2 weeks, so if no one opposes then let's aim to hang out end of July / beginning of August. :thumb:
Or let me know if you have any proposed time/date lol.
can someone ID this board? it was super nice. i was hoping a picture would pop up of it but this is the only one where i can see it and the name is cut off. fujitsu or something? it was on the last table closest to the bathroom on the top right looking down.Show Image(http://i.imgur.com/AeUh5zM.jpg)
can someone ID this board? it was super nice. i was hoping a picture would pop up of it but this is the only one where i can see it and the name is cut off. fujitsu or something? it was on the last table closest to the bathroom on the top right looking down.Show Image(http://i.imgur.com/AeUh5zM.jpg)
I believe it was a type of topre with super sculpted high profile caps? I didn't like how much it sucked my fingers into the caps. Not 100% on the switch type though. Iirc it felt like light topre.
The board is called the Nissho KB106DE.
It originally came with 30g topre switches and was later changed to 55g. Halverson said they were super light in the comments but that may be because I kept the numpad in 30g.
The bottom row arrangement isn't actually like that and is more of a traditional Japanese layout but it has been fiddled with to look like it did.
I believe it was a type of topre with super sculpted high profile caps? I didn't like how much it sucked my fingers into the caps. Not 100% on the switch type though. Iirc it felt like light topre.The board is called the Nissho KB106DE.
It originally came with 30g topre switches and was later changed to 55g. Halverson said they were super light in the comments but that may be because I kept the numpad in 30g.
The bottom row arrangement isn't actually like that and is more of a traditional Japanese layout but it has been fiddled with to look like it did.
I liked it! I loved the feel of the keycaps, actually. Are those stock?
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
;)
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
;)
That's maybe the most insulting thing I have read on this forum.
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
;)
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
;)
That's maybe the most insulting thing I have read on this forum.
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
I believe it was a type of topre with super sculpted high profile caps? I didn't like how much it sucked my fingers into the caps. Not 100% on the switch type though. Iirc it felt like light topre.The board is called the Nissho KB106DE.
It originally came with 30g topre switches and was later changed to 55g. Halverson said they were super light in the comments but that may be because I kept the numpad in 30g.
The bottom row arrangement isn't actually like that and is more of a traditional Japanese layout but it has been fiddled with to look like it did.
I liked it! I loved the feel of the keycaps, actually. Are those stock?
Yup the caps are completely stock. Aside from the spacebars.
+1 for sushi. But not bubble tea, it's like drinking Topre cup rubber. Squishy. Ew.
;)
That's maybe the most insulting thing I have read on this forum.
Damnit guys! Because of the meet...I want a HHKB...
Damnit guys! Because of the meet...I want a HHKB...
Yay!
Damnit guys! Because of the meet...I want a HHKB...
Yay!
I'm waiting for mistake^2's AL case...mmmmmmmmm :-*
Damnit guys! Because of the meet...I want a HHKB...
Yay!
I'm waiting for mistake^2's AL case...mmmmmmmmm :-*
Oh Lordy. Get the hhkb before we get old!
Damnit guys! Because of the meet...I want a HHKB...
Yay!
I'm waiting for mistake^2's AL case...mmmmmmmmm :-*
Oh Lordy. Get the hhkb before we get old!
What boards do you have sir? All you brought was your "iPhone 4S with linear switches"
Ughhhh so many. Should have brought some.
Hhkb
Hhkb with 30g silent
JiS anniversary topre
Topre short throw
LZ GH
Siig mini touch with Monterey blues
Duck v2 with blue alps
Ducky year of the rabbit
Model f 122
Weird Chinese/Japanese alps
Weird Japanese ibm with some sorta clicky switches
Several model M including one made on my bday
Sgi granite
Grass valley video editing tank with a 2550 shoved inside
G80 in a peacock case with Miami caps
Like two or three pokers, one in a Lego case, one is a oneproduct bent aluminum case
Hall effect numpad
Four ibm selectrics
F660c
Ortek with white alps
Possibly more...
Ughhhh so many. Should have brought some.
Hhkb
Hhkb with 30g silent
JiS anniversary topre
Topre short throw
LZ GH
Siig mini touch with Monterey blues
Duck v2 with blue alps
Ducky year of the rabbit
Model f 122
Weird Chinese/Japanese alps
Weird Japanese ibm with some sorta clicky switches
Several model M including one made on my bday
Sgi granite
Grass valley video editing tank with a 2550 shoved inside
G80 in a peacock case with Miami caps
Like two or three pokers, one in a Lego case, one is a oneproduct bent aluminum case
Hall effect numpad
Four ibm selectrics
F660c
Ortek with white alps
Possibly more...
Wow...that's a lot! You should have brought some dude! What colours are your HHKB's? Maybe I should get one...should I get it from EK?
Ughhhh so many. Should have brought some.
Hhkb
Hhkb with 30g silent
JiS anniversary topre
Topre short throw
LZ GH
Siig mini touch with Monterey blues
Duck v2 with blue alps
Ducky year of the rabbit
Model f 122
Weird Chinese/Japanese alps
Weird Japanese ibm with some sorta clicky switches
Several model M including one made on my bday
Sgi granite
Grass valley video editing tank with a 2550 shoved inside
G80 in a peacock case with Miami caps
Like two or three pokers, one in a Lego case, one is a oneproduct bent aluminum case
Hall effect numpad
Four ibm selectrics
F660c
Ortek with white alps
Possibly more...
Wow...that's a lot! You should have brought some dude! What colours are your HHKB's? Maybe I should get one...should I get it from EK?
I got my first blank white/grey from Japan when the yen was low. Here's a potato of how it looks now, all symmetrical n stuff.
The 30g is an old pro 1 in black printed I got on yahoo auctions cheap. Then modded with the jis 10th ann. I think I'm modding back cause 30g hhkb is not my fav but I like it in realforce boards.
EK is a safe bet if you're looking for new. Or if used you could get a good deal on GH.
Ughhhh so many. Should have brought some.
Hhkb
Hhkb with 30g silent
JiS anniversary topre
Topre short throw
LZ GH
Siig mini touch with Monterey blues
Duck v2 with blue alps
Ducky year of the rabbit
Model f 122
Weird Chinese/Japanese alps
Weird Japanese ibm with some sorta clicky switches
Several model M including one made on my bday
Sgi granite
Grass valley video editing tank with a 2550 shoved inside
G80 in a peacock case with Miami caps
Like two or three pokers, one in a Lego case, one is a oneproduct bent aluminum case
Hall effect numpad
Four ibm selectrics
F660c
Ortek with white alps
Possibly more...
Wow...that's a lot! You should have brought some dude! What colours are your HHKB's? Maybe I should get one...should I get it from EK?
I got my first blank white/grey from Japan when the yen was low. Here's a potato of how it looks now, all symmetrical n stuff.
The 30g is an old pro 1 in black printed I got on yahoo auctions cheap. Then modded with the jis 10th ann. I think I'm modding back cause 30g hhkb is not my fav but I like it in realforce boards.
EK is a safe bet if you're looking for new. Or if used you could get a good deal on GH.
disgusting
Kinda upset but I ended up having a ball hockey tournament in St. Catharines so I was unable to go. Looks like it was a lot of fun and not impressed that I missed out. Hopefully more things can happen in the near future.
Did you forget a link kelbear? :(
Hi everyone, I'm new! I'm not a gamer and only use keyboards for typing... hope I'm still welcome here lol.
I just discovered this site, which unfortunately means I missed the meetup. Does anyone know where I can try out various switches in/near Toronto? Specifically I would like to try Topre, Matias, and Cherry MX Clear (and variants like Ergo Clear).
I have already tried the following Cherry switches:
Blue - These probably had the best feel of the ones I've tried, but I'd prefer a little more resistance at the tactile point, without increasing the spring stiffness. Also a little too loud for the office.
Green - OK tactility (could still be better), but spring a little too stiff for prolonged typing. Ditto for noise.
Brown - Can barely feel the tactile point at all. It just feels like a less smooth linear switch to me.
Black/Red - I need tactility, so I hate linear switches.
Honestly, still I prefer the best rubber dome keyboards (Thermaltake esports Commander, Cooler Master Storm Devastator, Logitech PerfectStroke) to any of the above mechanical switches I've tried, durability issues notwithstanding. I'm thinking I would like Matias though - I just need my fingers to verify before I buy. I'm assuming I can't just show up at the Matias warehouse lol. Any suggestions? Thanks!
If you want to try out some of the available Matias options, contact us to arrange a time to drop by... :-)
http://matias.ca/contact
Any chance of a round 3 this winter?
Any chance of a round 3 this winter?
lol if there is I say we hold it somewhere closer to public transit, if the snow is as bad as it was last year T_T
except core downtown is literally the worst for everyone actually living in toronto
Any chance of a round 3 this winter?
except core downtown is literally the worst for everyone actually living in toronto
Just come north, heheHow north are we talking?
Just come north, heheHow north are we talking?
Just come north, heheHow north are we talking?
Farther north than you city folk travel lol
Just come north, heheHow north are we talking?
Farther north than you city folk travel lol
You mean north of Bloor, aka Timbuktu? :p