Post by: excluisve on Fri, 22 November 2019, 10:00:13
IC link :https://geekhack.org/index.php?topic=102901.0 (https://geekhack.org/index.php?topic=102901.0)
(https://i.imgur.com/10prFgM.jpg)
(https://i.imgur.com/Uqe5SBo.jpg)
(https://i.imgur.com/ds0tuyg.jpg)
(https://i.imgur.com/MDQIzL6.jpg)
(https://i.imgur.com/pwCDxZB.jpg)
(https://i.imgur.com/85EIqyV.jpg)
More
(https://i.imgur.com/dGAUePB.jpg)
(https://i.imgur.com/vIq98EF.jpg)
(https://i.imgur.com/xdPZIy4.jpg)
(https://i.imgur.com/Gj8xBYp.jpg)
Hello everyone Excluisve here
In the past three years, I have had a lot of sadness and tears. I am very glad that have been here for three years. also very grateful to my friends who have supported me for three years and hope that my keyboard can get your love. This time brings a new TKL design it is a completely different design.
make sure you want get FE（full brass edition） Form :http://bit.ly/2saZEP3 (http://bit.ly/2saZEP3)
Fe orders check :http://bit.ly/33ep76S (http://bit.ly/33ep76S)
PC(ploycarbon) form: http://bit.ly/2rhB0vu
PC form check :http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
Change request form:https://forms.gle/gJbb1Z6kGNdPuyDn6 (https://forms.gle/gJbb1Z6kGNdPuyDn6)
Alu case :http://bit.ly/34infLD (http://bit.ly/34infLD)
Alu case orders check :https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
request form close on 15th
E8.5 - 80% custom keyboard
Features:
*Polycarbonate / Aluminium / Pvd accent are available
*7 degrees slope,the leds above arrow cluster was rgb
*Inner middle for gasket mount (base kit was top mount)https://i.imgur.com/cV5BfbO.jpg (https://i.imgur.com/cV5BfbO.jpg)
*Solder pcb layout:already add split backspacehttps://i.imgur.com/Pj6VjJn.png (https://i.imgur.com/Pj6VjJn.png) Hotsawp layout:already add step capshttps://i.imgur.com/ZBmKbUd.png (https://i.imgur.com/ZBmKbUd.png)
*QMK with USB C
Color for each parts :
Alu Case :Purple/grey/green E-white /E-black/E-pink
Plate: green /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)/Ti/pc
Top accent: green /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)/pvd silver/pc/light blue
Side weight: green /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)
Estimated price : Start at $365
Third Anniversary Version FE 10 kit Raffle ($888)
Upgrading
TI plate + 55
brass plate (sand) +$35
Brass side weight (sand)+$40
Brass accent (sand )+$15
Brass accent (pvd silver)$25
Get alu inner middle (black or white )+45 for gasket mount
Extra
Pcb : $48
Alu /pc plate $38
Brass plate (sand) $55
Alu accent :$15
Brass accent(sand):$20
Brass accent(pvd silver):$30
Brass accent(pvd black):30 only FE
Brass accent to e white $25 only FE
Brass accent to e black $25 only FE
alu side weight : $38
Brass side weight(sand) :$58
Brass side weight to e white $60 only FE
Brass side weight to e black $60 only FE
Brass side weight(pvd silver)$70 only FE
Brass side weight(pvd black)$70 only FE
No extra inner middle ,no extra ti plate
Extra accents max 3
-----------------------------------------------------------------------------------------------
More pictures :
- E white :https://imgur.com/a/iHrFC6W (https://imgur.com/a/iHrFC6W)
- More color :https://imgur.com/a/Q17GLxg (https://imgur.com/a/Q17GLxg)
- Accents : https://imgur.com/a/F7tYgHf
- Rendering : https://imgur.com/a/Aw5B8qy
Schedule：
Groupbuy launch time :
FE Raffle 22th, 11:00am EST
PC FCFS 23th, 11:00am EST
Alu 24th, 11:00am run two weeks
I am use this time zone https://www.timeanddate.com/time/zones/est (https://www.timeanddate.com/time/zones/est)
ETA : Early of June 2020 .
(https://i.imgur.com/UB2CUQh.png)
FE Edition - Raffle
+ A Google Forms link will be provided via GH and Discord prior to opening
+ Form will open and start collecting responses at 11:00 am EST on 11/22 (form will contain all options for the order)
+ Responses will be collected for 22 hours until 9:00am EST on 11/23
+ (10) Winners will be drawn and announced by 10:00am EST on 11/23
+ Forms can be edited for 3 days through 11/25
+ Invoices will be generated and sent out via PayPal on 11/26
+ Payments will be due by 11/27
+ If payments are not received in time, another winner will be redrawn from the pool
PC Edition - First Come, First Serve
+ Prior to opening, a Google form link will be shared via GH and Discord
+ Form will be a single field and submit = your GH or discord name
+ Form will activate at 11:00am EST on 11/23
+ The first 60 people who submit the form will be collected
+ Those people will then be given a longer Google form to complete all choices for their order
+ Those choices can be edited for three days until 11/26
+ PayPal invoices will be generated for the first 50 people in the list between 11/27 - 11/28
+ Payment for invoices will be due by 11/30
+ Any user who does not pay their invoice by 11/30 will be passed up and invoices will be generated for the next person in line (#51, 52, 53, etc)
Aluminum Edition - Unlimited
+ Prior to opening, a Google form link will be shared via GH and Discord
+ Form will contain all options for the order
+ Form will open and start collecting responses at 11:00 am EST on 11/24
+ GB will be open for 2 weeks through 12/6
+ Submitted responses will be available for editing options for 5 days and close on 12/11
+ PayPay invoices will be generated and sent out between 12/13 - 12/16
+ Payment for invoices will be due by 12/19
Note: Some timelines may be adjusted as needed to improve experience (Like invoice people who are ready before the prescribed invoicing period)
FAQs
+ For the founder's edition, there are e-white and e-black options to choose from
+ For the PC version, you can also choose a PC top accent piece
+ Can I mix and match colors? For the Aluminum version, you can choose different colored top and bottom half of the case if you'd like.
+ Can I match a PC top/bottom with an Aluminum one? - Not in one order. You must buy either a full PC case or a full Aluminum case.
+ The inner middle to support gasket mount is an optional piece and is an upcharge (pricing soon). It comes in Aluminum e-white or e-black only
+ Sandblasted brass parts have a clear e-coating for protection applied to them
+ What is e-coating? https://clearclad.com/products/what-is-e-coat/
+ What does a gasket do? Provides more flex & bounce to typing experience than mounting the plate to the top or bottom of a case.
+ How much is shipping and when is it charged? Shipping is calculated (and invoiced) once the manufacturing process is completed and the end product is ready to be sent out. Price varies by country being delivered to
+ How many units will be made? Founder's Edition - 10 (raffle). Polycarbonate - 50 (FCFS). Aluminum - Unlimited
+ Can i buy two spots ? there was no limited on alu case you can buy much you want ,but for PC case one per person
statement：
Each boards cant be 100% but i will try my ability do it perfectly .
if you cant accept a little Inevitable ,especially PVD stuff (Quality is hard to control )please thinks twice before purchanse
For some orders i will consider to sale .thanks evryone : )
Free to leave suggestion and question.---
Thanks all!
Fellow me on Ins https://www.instagram.com/exclusive1993/ (https://www.instagram.com/exclusive1993/)
Post by: excluisve on Fri, 22 November 2019, 11:17:14
Post by: Visionaire on Fri, 22 November 2019, 11:18:13
If you want to try for the all-brass founder's edition, here's the link for the raffle. OPEN NOW. 10 winners chosen tomorrow.
http://bit.ly/2saZEP3
Post by: 9force on Fri, 22 November 2019, 11:19:30
good luck everyone.
祝大家好运！
Post by: Steezus on Fri, 22 November 2019, 11:21:57
Post by: SolidCactus on Fri, 22 November 2019, 11:22:30
Post by: Boy_314 on Fri, 22 November 2019, 11:24:40
Post by: nhto on Fri, 22 November 2019, 12:02:15
Post by: Popopro on Fri, 22 November 2019, 12:07:58
Post by: PotatoTM on Fri, 22 November 2019, 12:15:09
Post by: LightningXI on Fri, 22 November 2019, 13:11:41
Post by: NoxNoxNox on Fri, 22 November 2019, 13:18:09
Post by: iaman on Fri, 22 November 2019, 13:33:15
Are there any photos of green anodized samples?The “more colors” link has a grey-anodized board with a green-anodized accent piece but that’s it.
Post by: Nigolski on Fri, 22 November 2019, 13:38:57
Post by: hiko13 on Fri, 22 November 2019, 13:40:43
Post by: Visionaire on Fri, 22 November 2019, 13:53:49
Are there any photos of green anodized samples?
Green shown here as an accent in the top right corner
(https://i.imgur.com/tMSm09D.jpg)
Should be similar to this color, I believe (from E6.5 buy)
(https://cdn.discordapp.com/attachments/631826888691810335/647006453630238733/iDAn6oF.png)
Post by: liquidvel on Fri, 22 November 2019, 14:08:19
Will the polycarb version me more expensive?
Post by: Visionaire on Fri, 22 November 2019, 14:14:28
Can anyone explain the google form to me? Where can I choose the colors (purple, red, etc.)?
Will the polycarb version me more expensive?
The google form that is out there right now is only for the founder's edition. Its an all brass version of the keyboard.
There will be a FCFS form tomorrow for 50 pcs of Polycarbonate case. That link will be shared prior to an 11:00am EST opening.
On Sunday, there will be a form that is for Aluminum cases. That will be open for 2 weeks and will have a 3rd link.
So stay tuned if interested in PC or Aluminium cases. They happen on the 23rd and 24th.
Post by: DetectiveNio on Fri, 22 November 2019, 14:20:48
Post by: hiko13 on Fri, 22 November 2019, 14:30:19
Post by: iaman on Fri, 22 November 2019, 14:35:05
This will be my first GB and custom so bear with me but...all I'll need to finish this are switches and keycaps, right, and with the hotswap option there's no need for soldering?Stabilizers, too.
Post by: 8six753o9 on Fri, 22 November 2019, 14:35:40
In case people are confused...
ONLY FE (all brass case) order form is open now (Nov 22) and winners will be chosen tomorrow (Nov 23)!
PC case form opens Nov 23 11am EST- countdown (https://www.timeanddate.com/countdown/taxday?iso=20191123T11&p0=263&msg=Time+until+Exclusive+E8.5+PC+Edition+form+open&font=hand&csz=1).
Aluminum case form opens Nov 24 11am EST - countdown (https://www.timeanddate.com/countdown/generic?iso=20191124T11&p0=263&msg=Time+until+Exclusive+E6.5+Aluminum+Edition+form+open&font=slab&csz=1) - Gray, Purple, Green, e-White, e-Black, e-Yellow, e-Pink.
Post by: hb_swift on Fri, 22 November 2019, 14:38:49
This will be my first GB and custom so bear with me but...all I'll need to finish this are switches and keycaps, right, and with the hotswap option there's no need for soldering?
That's correct!
Post by: consumer on Fri, 22 November 2019, 14:44:18
Post by: hiko13 on Fri, 22 November 2019, 15:09:19
This will be my first GB and custom so bear with me but...all I'll need to finish this are switches and keycaps, right, and with the hotswap option there's no need for soldering?Stabilizers, too.
Plate mounted, I presume?
Post by: A57RO on Fri, 22 November 2019, 15:44:38
Post by: iaman on Fri, 22 November 2019, 15:50:55
I think either plate-mounted or PCB-mounted should be fine, but I don't think E has shared any shots of the PCBs to confirm. Visionaire might know?This will be my first GB and custom so bear with me but...all I'll need to finish this are switches and keycaps, right, and with the hotswap option there's no need for soldering?Stabilizers, too.
Plate mounted, I presume?
Post by: Rob27shred on Fri, 22 November 2019, 15:57:58
I think either plate-mounted or PCB-mounted should be fine, but I don't think E has shared any shots of the PCBs to confirm. Visionaire might know?This will be my first GB and custom so bear with me but...all I'll need to finish this are switches and keycaps, right, and with the hotswap option there's no need for soldering?Stabilizers, too.
Plate mounted, I presume?
You'll need PCB mount stabilizers for this.
Post by: Solotov on Fri, 22 November 2019, 16:11:20
Post by: flippanteer on Fri, 22 November 2019, 16:37:01
Post by: Puddsy on Fri, 22 November 2019, 20:24:11
Post by: excluisve on Fri, 22 November 2019, 20:50:31
thanks all .
Post by: Rob27shred on Fri, 22 November 2019, 20:53:42
very excited for this and odds are good that i order one
Same here, I'd love to get a polycarb one. Although the limited run on them probably means I'll end up with an alum. one if I can pull the cash together soon enough. That might be for the best anyways, I went alum. on the E6.5 & couldn't be happier with the board!
Post by: Puddsy on Fri, 22 November 2019, 21:08:16
very excited for this and odds are good that i order one
Same here, I'd love to get a polycarb one. Although the limited run on them probably means I'll end up with an alum. one if I can pull the cash together soon enough. That might be for the best anyways, I went alum. on the E6.5 & couldn't be happier with the board!
alu is best anyway
black/yellow or bust
Post by: outerspace on Fri, 22 November 2019, 21:18:59
Also, I assume this will be shipped from China? Would it be reasonable to budget ~$50 in shipping?
Post by: Puddsy on Fri, 22 November 2019, 22:36:47
Do we have a picture of e-white with e-yellow accent & side weight? Can’t decide between that and e-white/green accents & side weight.
Also, I assume this will be shipped from China? Would it be reasonable to budget ~$50 in shipping?
to US?
probably more given the issues between US and china right now
i'd say 65-75
Post by: Aznguyen316 on Sat, 23 November 2019, 05:02:59
Do we have a picture of e-white with e-yellow accent & side weight? Can’t decide between that and e-white/green accents & side weight.
Also, I assume this will be shipped from China? Would it be reasonable to budget ~$50 in shipping?
Think6.5 from China via DHL which was literally 2 day shipping was $42. It was initially supposed to be SF or something that's cheaper, but DHL due to concerns with SF shipping. DHL is super fast and more expensive. So I would hope no more than $50 for a TKL.
Post by: zekth on Sat, 23 November 2019, 07:39:15
Post by: excluisve on Sat, 23 November 2019, 07:52:59
MetallicCharles
andrewregal
Olivia
SolidCactus
foo#4542
smittysteve
Phatty
icyincake
mgsickler
japanesehorrorwriter
Thanks all to fill this form ,hope you can in next time
Fe orders check :http://bit.ly/33ep76S (http://bit.ly/33ep76S)
Post by: 8six753o9 on Sat, 23 November 2019, 08:08:02
There is still red in renders but seems like there is no more in the description of the GB. Is red color for alu abandonned?Correct. Red is no longer an option, just gray, green, purple, eblack, ewhite, and epink for aluminum cases.
Post by: hiko13 on Sat, 23 November 2019, 09:09:06
You'll need PCB mount stabilizers for this.
Thank you!
Post by: excluisve on Sat, 23 November 2019, 09:21:59
PC form: http://bit.ly/2rhB0vu (http://bit.ly/2rhB0vu)
I will click the buttom on 11:00 am EST
time check
https://www.timeanddate.com/countdown/taxday?iso=20191123T11&p0=263&msg=Time+until+Exclusive+E8.5+PC+Edition+form+open&font=hand&csz=1 (https://www.timeanddate.com/countdown/taxday?iso=20191123T11&p0=263&msg=Time+until+Exclusive+E8.5+PC+Edition+form+open&font=hand&csz=1)
(https://i.imgur.com/aTI0cyR.png)
Post by: Rob27shred on Sat, 23 November 2019, 09:38:27
You'll need PCB mount stabilizers for this.
Thank you!
No problem!
Post by: jacky on Sat, 23 November 2019, 09:41:06
Post by: Solotov on Sat, 23 November 2019, 10:00:55
Post by: Steezus on Sat, 23 November 2019, 10:02:06
The form even went down for a few seconds... Hope I still made it :'(
Yeah, the form went down for me too, once I was finally able to get in the orders were filled. Congrats to the winners.
Post by: donut_sauce on Sat, 23 November 2019, 10:02:09
Post by: mononokay on Sat, 23 November 2019, 10:03:02
The form even went down for a few seconds... Hope I still made it :'(
Yeah, the form went down for me too, once I was finally able to get in the orders were filled. Congrats to the winners.
Same. Oh well
Sent from my iPhone using Tapatalk
Post by: wholypantalones on Sat, 23 November 2019, 10:05:54
Post by: DonkeyD on Sat, 23 November 2019, 10:06:43
Post by: wholypantalones on Sat, 23 November 2019, 10:08:05
so if i didnt get an email, I didn't get in?
did you check "send me copy"?
Post by: DetectiveNio on Sat, 23 November 2019, 10:08:33
Post by: excluisve on Sat, 23 November 2019, 10:11:51
Post by: DonkeyD on Sat, 23 November 2019, 10:16:31
so if i didnt get an email, I didn't get in?
did you check "send me copy"?
no i panicked lol
Post by: enfer on Sat, 23 November 2019, 10:25:49
Post by: marme358 on Sat, 23 November 2019, 10:38:05
Post by: Nothatso on Sat, 23 November 2019, 10:41:00
Post by: DetectiveNio on Sat, 23 November 2019, 10:52:13
The list of people who got in to the PC GB was posted in discord. Exclusive said emails will go out Soon™.
you got that discord link?
Post by: excluisve on Sat, 23 November 2019, 10:54:02
(https://i.imgur.com/GGCfv95.png)
(https://i.imgur.com/92kRIAA.png)
form already send out ,check list if you not get plz check the 'spam'
email pending wait it patiently
Appreciate that who filled the form ,thanks every one !
Post by: Visionaire on Sat, 23 November 2019, 11:04:15
Post by: Raravin on Sat, 23 November 2019, 11:12:30
Post by: wholypantalones on Sat, 23 November 2019, 11:27:54
So wait I am confused the actual GB doesnt start till tomorrow right?
this was for the 50 spot polycarbonate fcfs.
Post by: Visionaire on Sat, 23 November 2019, 11:31:45
So wait I am confused the actual GB doesnt start till tomorrow right?
Aluminum buy will be open tomorrow and run for 2 weeks. :)
Post by: 8six753o9 on Sat, 23 November 2019, 16:41:52
you got that discord link?
https://discord.gg/6UpDm6d
Post by: excluisve on Sat, 23 November 2019, 19:19:30
Post by: excluisve on Sun, 24 November 2019, 02:16:35
extra brass plate was $55
Post by: phorx on Sun, 24 November 2019, 08:28:54
Post by: excluisve on Sun, 24 November 2019, 09:52:39
What kind of colour / finish will the titanium plate have?Sandblasted
Post by: excluisve on Sun, 24 November 2019, 09:57:07
you can edit after you submit,if you have submit twice plz not at last let me know which one was correct
Post by: anduin on Sun, 24 November 2019, 10:32:27
Post by: Lockkkk on Sun, 24 November 2019, 10:42:28
Post by: alanskiii on Sun, 24 November 2019, 11:02:38
Post by: coffeeshopcoder on Sun, 24 November 2019, 12:37:04
(Sorry I did not read through every comment - just skimmed through it...)
Post by: d00deitsnik on Sun, 24 November 2019, 12:59:11
did I miss the ALU GB form link ? Or its not posted yet ?Here you go. (:
(Sorry I did not read through every comment - just skimmed through it...)
Alu case :http://bit.ly/34infLD
you can edit after you submit,if you have submit twice plz not at last let me know which one was correct
Post by: redeyez88 on Sun, 24 November 2019, 14:41:07
Post by: excluisve on Sun, 24 November 2019, 17:13:28
So, if we want to get multiple (gift), should I just fill out another form? Or would that just remove my initial submission?You need mark at last blanket ,let me know is you second purchase not repetitive
Post by: redeyez88 on Sun, 24 November 2019, 20:15:47
So, if we want to get multiple (gift), should I just fill out another form? Or would that just remove my initial submission?You need mark at last blanket ,let me know is you second purchase not repetitive
Thank you!
Post by: EternaL7 on Sun, 24 November 2019, 21:15:48
Post by: SmithersDotTV on Sun, 24 November 2019, 21:43:30
Post by: jooobe on Sun, 24 November 2019, 21:54:13
Sent from my SM-N960F using Tapatalk
Post by: bball2 on Sun, 24 November 2019, 22:31:18
Before I join the GB can someone tell me if 6.25 spacebar is compatible with the hot swap Pcb?
Should be a 6.25 spacebar if you with the WK layout.
Post by: Visionaire on Sun, 24 November 2019, 22:34:19
So I filled out the form for the alu case, will there be a confirmation email when the GB closes?
We'll do an order check before sending out invoices to allow folks to confirm their choices.
Post by: excluisve on Sun, 24 November 2019, 22:47:03
PC form check :http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
Change request form:https://forms.gle/gJbb1Z6kGNdPuyDn6 (https://forms.gle/gJbb1Z6kGNdPuyDn6)
(PC)EOD 11/26
Invoices on 11/27
Alu case
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
ID :tintaps and arrowarrow1 still not filled the PC form plz do it in time
Post by: Hamel on Mon, 25 November 2019, 07:07:11
(typed on E7-V1 :thumb: )
Post by: zian_ on Mon, 25 November 2019, 07:18:12
Post by: grundlemere on Mon, 25 November 2019, 08:42:45
Post by: Visionaire on Mon, 25 November 2019, 08:58:56
Will there be a form check for Alu?
Yep, soon!
Post by: Wolfman_21 on Mon, 25 November 2019, 09:05:01
When the Alu order list be up?
Post by: jooobe on Mon, 25 November 2019, 09:06:15
Finally made an account just to join this group buy!End of gb
When the Alu order list be up?
Sent from my SM-N960F using Tapatalk
Post by: grundlemere on Mon, 25 November 2019, 09:06:52
Will there be a form check for Alu?
Yep, soon!
Thank u, u doin the lord's work
Post by: Arithmetics on Mon, 25 November 2019, 12:20:02
Post by: mrkantz on Mon, 25 November 2019, 12:28:45
Is there a way to get the shiny silver accent color for the back weight / triangle thing?
Nope, E mentioned he didn't want to do PVD silver on the weight since the failure rate of PVD is too high
Post by: Arithmetics on Mon, 25 November 2019, 15:43:01
Is there a way to get the shiny silver accent color for the back weight / triangle thing?
Nope, E mentioned he didn't want to do PVD silver on the weight since the failure rate of PVD is too high
oof thanks.
Post by: excluisve on Mon, 25 November 2019, 19:30:41
Post by: Stich on Tue, 26 November 2019, 00:15:32
Post by: ywcsam on Tue, 26 November 2019, 00:34:26
Hi, I'm new to custom mechanical keyboards looking for some help. May I ask if the add on inner middle is the same thing as a gasket? The gasket is supposed to make typing feel bouncier right? Is it worth getting?
The inner trim is for the gasket to sit on. If you want gasket mount, you need to get that trim. It does give more room for the plate to move, but at the end it's all preference. I would say get it so you can try both and see which one you like.
Post by: lanyusea on Tue, 26 November 2019, 01:07:32
Post by: excluisve on Tue, 26 November 2019, 04:09:20
plz filled change request form ,also you can check you submit go through or not and check dealing with the situation
PC form check :http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
Change request form:https://forms.gle/gJbb1Z6kGNdPuyDn6
(https://forms.gle/gJbb1Z6kGNdPuyDn6)
(PC)EOD 11/26
Invoices on 11/27
(https://i.imgur.com/vjhcdud.png)
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Post by: Stich on Tue, 26 November 2019, 05:46:42
Hi, I'm new to custom mechanical keyboards looking for some help. May I ask if the add on inner middle is the same thing as a gasket? The gasket is supposed to make typing feel bouncier right? Is it worth getting?
The inner trim is for the gasket to sit on. If you want gasket mount, you need to get that trim. It does give more room for the plate to move, but at the end it's all preference. I would say get it so you can try both and see which one you like.
Thank you for the reply! I think I'll get it to try it, thanks!
Post by: wholypantalones on Tue, 26 November 2019, 07:41:14
If you need change PC or Alu order
plz filled change request form ,also you can check you submit go through or not and check dealing with the situation
PC form check :http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
Change request form:http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
(PC)EOD 11/26
Invoices on 11/27
The change request form goes to the form check document.
Post by: excluisve on Tue, 26 November 2019, 08:09:49
TY,fixedIf you need change PC or Alu order
plz filled change request form ,also you can check you submit go through or not and check dealing with the situation
PC form check :http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
Change request form:http://bit.ly/2XKo8Kk (http://bit.ly/2XKo8Kk)
(PC)EOD 11/26
Invoices on 11/27
The change request form goes to the form check document.
Post by: jooobe on Tue, 26 November 2019, 09:50:59
Sent from my SM-N960F using Tapatalk
Post by: excluisve on Tue, 26 November 2019, 10:08:04
My name response is missing, should I fill out the form again?Fill the change request foam let me know you id and which row you are in
Sent from my SM-N960F using Tapatalk
Post by: Water lee on Wed, 27 November 2019, 00:52:15
Post by: cong314159 on Wed, 27 November 2019, 03:32:02
Post by: 8six753o9 on Wed, 27 November 2019, 07:15:26
Where I can find my form response for the aluminum case version?
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Post by: n0m1s_0711 on Wed, 27 November 2019, 08:20:55
Post by: aa212121 on Wed, 27 November 2019, 08:45:16
Whats the ETA for completion of the group buy?
Post by: Popopro on Wed, 27 November 2019, 11:41:18
I couldnt find it in the OP.
Whats the ETA for completion of the group buy?
I would guess around may based on how the previous exclusive buys went.
Post by: Visionaire on Wed, 27 November 2019, 13:53:06
Post by: of_sam on Wed, 27 November 2019, 15:25:13
Post by: clik_clak on Wed, 27 November 2019, 15:28:29
I'm confused what the sand blasted brass with eclear would look like. I want the silver pvd accent, but can I not get a silver pvd weight to go along with this?
It would look like matte brass.
And no you can't. I believe it was saved for the LE and PC versions.
Post by: _nowai on Wed, 27 November 2019, 16:06:21
Got the green alu version to match my GMK 9009 :D
Post by: Surefoot on Wed, 27 November 2019, 17:13:03
Post by: Morgan3Wheeler on Wed, 27 November 2019, 18:21:47
Post by: _rubik on Thu, 28 November 2019, 02:32:05
Post by: excluisve on Thu, 28 November 2019, 08:40:58
Just out of curiosity, do we know what the alu case weighs before assembly?Almost 1980g
Post by: excluisve on Thu, 28 November 2019, 10:20:46
make sure you are ready and check you orders in time
thansk all,and Happy Thanksgiving Day
Post by: japancakes on Thu, 28 November 2019, 12:29:12
Post by: excluisve on Thu, 28 November 2019, 12:52:46
Should we have received a confirmation after filling out the form? I did and haven't seen anything.
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Post by: japancakes on Thu, 28 November 2019, 13:05:20
Should we have received a confirmation after filling out the form? I did and haven't seen anything.
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Thanks! Found this after I posted in Discord. Looks like I'm about to be broke.
Post by: excluisve on Thu, 28 November 2019, 13:28:40
(https://i.imgur.com/gHwCGqJ.jpg)
I have been this communtiy for three years ,thanks to all friends supports my keyboard.
so we have plan to do a giveaway
- Winner receives one (1) free E8.5 Aluminum 80% keyboard kit (no extras included)
- Entries will be collected until midnight, EST on Dec 3th
- One entry per person
- Winner randomly selected on Dec 3th
Follow my instagram and leave a comment .Winner will choose from comment.
Post by: outerspace on Thu, 28 November 2019, 19:20:05
Should we have received a confirmation after filling out the form? I did and haven't seen anything.
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Hello E, is the form up-to-date? I added a second order this pm, and I don’t see it in the form.
Post by: excluisve on Thu, 28 November 2019, 19:44:26
Hi,i will updated form later .Should we have received a confirmation after filling out the form? I did and haven't seen anything.
Alu case form check:https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Hello E, is the form up-to-date? I added a second order this pm, and I don’t see it in the form.
Post by: jooobe on Thu, 28 November 2019, 19:52:37
SweetShow Image(https://i.imgur.com/gHwCGqJ.jpg)
I have been this communtiy for three years ,thanks to all friends supports my keyboard.
so we have plan to do a giveaway
- Winner receives one (1) free E8.5 Aluminum 80% keyboard kit (no extras included)
- Entries will be collected until midnight, EST on Dec 3th
- One entry per person
- Winner randomly selected on Dec 3th
Follow my instagram and leave a comment .Winner will choose from comment.
Sent from my SM-N960F using Tapatalk
Post by: EternaL7 on Thu, 28 November 2019, 21:04:52
Post by: Razzalith on Thu, 28 November 2019, 23:17:33
Post by: excluisve on Fri, 29 November 2019, 00:14:19
I had goofed up and submitted my form twice and submitted to have the duplicate removed, then i noticed that my one board on there wasn't correct for the invoice and on sending another correction my order is now missing from the spreadsheet.
PM me you invoice id and spreadsheet will updated later
Post by: BashForCash on Fri, 29 November 2019, 00:36:05
Post by: excluisve on Fri, 29 November 2019, 00:57:31
I'm kind of a noob getting into the keyboard world but what is the diffobetween WL and WLK layouts for the keyboard?You can check the layout on homepages.
Post by: vieter729 on Fri, 29 November 2019, 02:30:20
or is it the same as the grey used in the e6.5?[attach=4]
Post by: NeroGrave on Fri, 29 November 2019, 08:28:19
Post by: _rubik on Fri, 29 November 2019, 14:09:26
Is there a picture of the grey that will be used? Also is the color used in this render that grey (Attachment Link)
or is it the same as the grey used in the e6.5? (Attachment Link)
Was wondering the same thing as well.
Post by: daishan on Fri, 29 November 2019, 14:29:11
Post by: of_sam on Fri, 29 November 2019, 15:44:59
Post by: Visionaire on Fri, 29 November 2019, 17:53:56
Is there a picture of the grey that will be used? Also is the color used in this render that grey (Attachment Link)
or is it the same as the grey used in the e6.5? (Attachment Link)
Was wondering the same thing as well.
This is a gray prototype with green accents.
(https://i.imgur.com/mQ4wZ3Z.jpg)
Post by: Zombo on Fri, 29 November 2019, 21:05:05
Post by: excluisve on Fri, 29 November 2019, 22:25:08
When does the Alu check form get updated?? I don't see my order on there and I ordered a few days agoSee you order on spreadsheet
Post by: excluisve on Sat, 30 November 2019, 10:28:26
orders check :https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form: https://forms.gle/kgPzyERCP7ewNawX9 (https://forms.gle/kgPzyERCP7ewNawX9)
Post by: SmithersDotTV on Sun, 01 December 2019, 05:57:34
Post by: excluisve on Sun, 01 December 2019, 06:01:34
Is the invoice still due on the 19th if it got sent early or is it due earlier?Invoice not set due date .it wont be overdue, you can pay after the date
asasp would be great since we will ship earily .
Post by: bball2 on Sun, 01 December 2019, 14:06:01
Post by: Arithmetics on Sun, 01 December 2019, 18:25:49
[mod edit: snip personal information]
is this who i should be paying?
just want to confirm before send so much $
Post by: PotatoTM on Sun, 01 December 2019, 18:53:19
FancyLab
[mod edit: snip personal information]
is this who i should be paying?
just want to confirm before send so much $
Yep that's correct, E confirmed on discord a few days ago. (you can confirm yourself in the #group-buy-news-updated channel in E's discord: https://discord.gg/s4hwRqG)
Post by: jooobe on Sun, 01 December 2019, 20:25:25
Sent from my SM-N960F using Tapatalk
Post by: excluisve on Sun, 01 December 2019, 20:47:09
FancyLabEdit you post ,don’t post real name
is this who i should be paying?
just want to confirm before send so much $
Post by: pears on Sun, 01 December 2019, 20:49:04
Y'all are getting invoices directly on PayPal?
Sent from my SM-N960F using Tapatalk
Yes, should be a paypal invoice from FancyLab with a qq.com email address
Post by: jooobe on Sun, 01 December 2019, 21:29:20
Cool thanksY'all are getting invoices directly on PayPal?
Sent from my SM-N960F using Tapatalk
Yes, should be a paypal invoice from FancyLab with a qq.com email address
Sent from my SM-N960F using Tapatalk
Post by: kchlam on Mon, 02 December 2019, 00:07:19
Post by: jurisitum on Mon, 02 December 2019, 01:10:22
Is the alu version of the board still available to join??
Yes. Till the 6th December.
Post by: excluisve on Mon, 02 December 2019, 05:47:30
ID:Backfire_104-gelat0-park jongin-Stich-Unknownsumo15 - not have correct paypal address
Post by: Rektygon on Mon, 02 December 2019, 22:07:30
Post by: Caelestic on Tue, 03 December 2019, 03:09:34
Post by: Visionaire on Tue, 03 December 2019, 07:27:29
Is the gasket inside of the body or is it visible from the outside? I cannot guess it from the parts overview picture.
No, you cannot see the gasket part from the outside. It's inside the bottom of the case.
Post by: Blubberflub on Tue, 03 December 2019, 14:29:53
Post by: Puddsy on Tue, 03 December 2019, 14:44:03
Has my order been submitted? I havent received a paypal invoicenyet.
invoicing has been happening in waves, so you will likely get one soon
considering the order period is still going on i wouldn't stress about it
Post by: jooobe on Tue, 03 December 2019, 15:14:54
Has my order been submitted? I havent received a paypal invoicenyet.https://bit.ly/2KThX1y
Go here and go to form response tab and then Ctrl+F your name to see
Sent from my SM-N960F using Tapatalk
Post by: Rektygon on Tue, 03 December 2019, 18:00:01
Post by: pears on Tue, 03 December 2019, 18:03:17
I don't know if my form went through, should I wait? or send another one.
Check out jooobe's post quoted below. It has a link to all the Alu orders so you can verify yours
Has my order been submitted? I havent received a paypal invoicenyet.https://bit.ly/2KThX1y
Go here and go to form response tab and then Ctrl+F your name to see
Sent from my SM-N960F using Tapatalk
Post by: Rektygon on Tue, 03 December 2019, 18:19:57
Post by: outerspace on Tue, 03 December 2019, 19:13:19
That's the problem, my name is not on the spreadsheet.
I don’t think the order check form gets updated in real time. Just check it tomorrow.
Post by: kuma on Tue, 03 December 2019, 19:33:58
Post by: excluisve on Tue, 03 December 2019, 21:21:12
i hope i get in!!!!
will updated later
Post by: apang42 on Tue, 03 December 2019, 23:00:28
Post by: excluisve on Wed, 04 December 2019, 01:03:48
Post by: NicoWilde on Wed, 04 December 2019, 07:40:57
Post by: HighOnBuffs on Wed, 04 December 2019, 16:54:42
So exited for this keyboard!
Post by: excluisve on Wed, 04 December 2019, 21:46:01
Hi i made some changes to my order. When will the next update be? :)Updated
So exited for this keyboard!
Post by: excluisve on Thu, 05 December 2019, 09:04:57
Post by: jacky on Thu, 05 December 2019, 17:38:49
Keep up!
Post by: Kho on Fri, 06 December 2019, 01:38:13
Post by: excluisve on Fri, 06 December 2019, 01:47:05
hey sorry if it has been asked before or if im somehow blind but how long will it take until the board is completed/shipped? thanks!Hi,ETA was May 2020
Post by: excluisve on Fri, 06 December 2019, 08:41:20
New account 3334186***@qq.com fixed
Post by: marme358 on Fri, 06 December 2019, 19:20:54
Post by: HighOnBuffs on Fri, 06 December 2019, 19:42:48
Does Hotswap support per switch RGB LED or white LED?
Post by: Blubberflub on Fri, 06 December 2019, 21:22:07
Post by: excluisve on Fri, 06 December 2019, 22:01:55
Says invoiced on the form request but I didn't receive anything?
You paypal address not correct ,pm me you account id not paypal me link
thanks
Post by: excluisve on Fri, 06 December 2019, 22:26:14
those orders have not correct paypal address
Post by: Jinnnxxu on Sat, 07 December 2019, 08:48:15
(https://img.zfrontier.com/post/20191122/lkSI2DpLSsjn76igDnAfqQDqvpwS?imageView2/2/w/700/q/85)
(https://img.zfrontier.com/post/20191122/FpQGz7jX9xoDpVs2ZLxYEIfULSB6?imageView2/2/w/700/q/85)
(https://img.zfrontier.com/post/20191122/lq9Vse-7WMDWioh5IGTNA1OFFofN?imageView2/2/w/700/q/85)
Post by: excluisve on Sun, 08 December 2019, 08:34:52
I'm in for both PC and Alu, it's really a nice keyboard!!!!:thumb: Last 12 hours for this groupbuy thanks everyone !Show Image(https://img.zfrontier.com/post/20191122/lkSI2DpLSsjn76igDnAfqQDqvpwS?imageView2/2/w/700/q/85)Show Image(https://img.zfrontier.com/post/20191122/FpQGz7jX9xoDpVs2ZLxYEIfULSB6?imageView2/2/w/700/q/85)Show Image(https://img.zfrontier.com/post/20191122/lq9Vse-7WMDWioh5IGTNA1OFFofN?imageView2/2/w/700/q/85)
Post by: IOVERCALLHISTIOCYTES on Sun, 08 December 2019, 11:54:32
Post by: elpepe21 on Mon, 09 December 2019, 13:45:17
Post by: IOVERCALLHISTIOCYTES on Mon, 09 December 2019, 13:55:23
Post by: deathwalker113 on Mon, 09 December 2019, 15:46:20
Post by: Puddsy on Mon, 09 December 2019, 16:30:57
i don't see my invoice ? I submitted the form but i don't know if i make it through or not
generally invoices come after the order period
Post by: wholypantalones on Mon, 09 December 2019, 18:48:27
i don't see my invoice ? I submitted the form but i don't know if i make it through or not
the sheet has to be manually updated, it took about a day for mine to show up.
Post by: excluisve on Mon, 09 December 2019, 19:32:01
Looks like im missing from the spreadsheet :/All orders updated ,let me know you ID filled on sheet
Post by: Psyoshi on Mon, 09 December 2019, 22:52:03
Post by: excluisve on Tue, 10 December 2019, 04:49:01
those orders have not correct paypal address
Post by: excluisve on Fri, 13 December 2019, 20:41:11
Alu case orders check :https://bit.ly/2KThX1y (https://bit.ly/2KThX1y)
Change request form:https://forms.gle/nGAH37zEqRQN3j3E7 (https://forms.gle/nGAH37zEqRQN3j3E7)
Post by: kenkaneki on Sat, 14 December 2019, 13:13:52
Post by: excluisve on Mon, 16 December 2019, 09:34:28
Post by: alanskiii on Mon, 16 December 2019, 12:40:17
Sent from my iPhone using Tapatalk
Post by: jooobe on Mon, 16 December 2019, 13:59:14
Sent from my SM-N960F using Tapatalk
Post by: kiriiya on Tue, 17 December 2019, 00:44:12
You already have my money
ok little man
Post by: jooobe on Tue, 17 December 2019, 08:26:20
han is that youYou already have my money
ok little man
Sent from my SM-N960F using Tapatalk
Post by: excluisve on Tue, 17 December 2019, 09:35:53
since we already been wait long time
thanks all
Post by: jacky on Tue, 17 December 2019, 10:19:39
Post by: olivavek on Tue, 17 December 2019, 11:00:49
Post by: excluisve on Wed, 18 December 2019, 09:27:04
Already excited for this board.
:thumb:
Post by: break on Wed, 18 December 2019, 15:43:44
Post by: mrnevertkl on Wed, 18 December 2019, 21:36:34
Post by: excluisve on Thu, 19 December 2019, 05:14:57
Noob here: if people don't pay by tomorrow, do others get a chance to get an order in?No.
Post by: excluisve on Thu, 19 December 2019, 09:34:03
Post by: _rubik on Fri, 10 January 2020, 16:27:35
Post by: jooobe on Fri, 10 January 2020, 21:33:38
This may have been mentioned back in the thread, but I'm lazy. Do we have a rough estimate for delivery?3 months at least
Sent from my SM-N960F using Tapatalk
Post by: flippanteer on Fri, 10 January 2020, 22:49:34
This may have been mentioned back in the thread, but I'm lazy. Do we have a rough estimate for delivery?3 months at least
Sent from my SM-N960F using Tapatalk
I'd imagine more with over 400 orders.
Post by: jooobe on Sat, 11 January 2020, 07:50:42
Most definitely moreThis may have been mentioned back in the thread, but I'm lazy. Do we have a rough estimate for delivery?3 months at least
Sent from my SM-N960F using Tapatalk
I'd imagine more with over 400 orders.
Sent from my SM-N960F using Tapatalk
Post by: jmsp0511 on Sun, 19 January 2020, 18:11:52
Prefer aluminum and e-white, but open to others
Post by: vi0till on Sun, 02 February 2020, 13:03:34
Want to buy groupbuy spot @ costSent you pm
Prefer aluminum and e-white, but open to others
Sent from my VOG-L29 using Tapatalk
Post by: forwardkey on Sun, 02 February 2020, 18:07:39
Post by: Espada42 on Sun, 02 February 2020, 20:16:27
Post by: DetectiveNio on Sun, 02 February 2020, 21:15:35
sold for tree fiddy
Post by: Albireo on Sun, 02 February 2020, 21:57:38
Looking to offload a PC spot for what I paid for. Since I made my own endgame here (https://www.reddit.com/r/MechanicalKeyboards/comments/etkafw/a_poormans_endgame_i_create_my_own_tkl_by_copying/), there is no need for me to have another F13 board. discord: Pera#0454 for proofs and case option chosen. Serious inquiries only please. Thank youPm'd!
Post by: Espada42 on Sun, 02 February 2020, 22:29:49
pm me, it's a white aluminium one.
Post by: Kriket on Mon, 03 February 2020, 05:00:54
Post by: rikercd on Mon, 03 February 2020, 11:55:47
I have also a spot if someone wants to buy it
pm me, it's a white aluminium one.
PM
Post by: Soyul on Wed, 05 February 2020, 22:33:51
Post by: ITAPurplerain on Thu, 13 February 2020, 18:55:13
Post by: Zach_ariah on Thu, 13 February 2020, 19:06:43
Post by: excluisve on Sat, 15 February 2020, 22:42:04
goverment announcement .have any updated will post on Ins ,discord and here .
Hope you guys have good time, ty
Post by: flippanteer on Sun, 16 February 2020, 00:02:07
Just a news,thanks to friends greeting.I am safe,All factory not work due to the virus ,factory still wait
goverment announcement .have any updated will post on Ins ,discord and here .
Hope you guys have good time, ty
Glad your safe!
Post by: outerspace on Mon, 17 February 2020, 18:43:36
Post by: wholypantalones on Tue, 18 February 2020, 05:22:54
Can’t seem to find this info, does this use screw in stabilizers? Thx!
The pcb supports PCB mounted stabilizers, so yes it should support screw in stabilizers which are PCB mounted.
Post by: nighD20 on Thu, 20 February 2020, 00:43:45
Post by: marme358 on Fri, 21 February 2020, 22:40:48
Post by: nighD20 on Sat, 22 February 2020, 03:53:47
Post by: ElKapitain on Sat, 22 February 2020, 10:46:32
Post by: MontePythons on Sat, 22 February 2020, 20:45:22
Looking to a buy a spot; white, PC, black, or gray.
Post by: excluisve on Mon, 09 March 2020, 22:20:43
Can’t wait for this to arrive! What are the dimensions on this TKL? Hopefully don’t need to adjust my tray to fit it.
Updated :
Sorry for long delay since we are facing exceptional case ，luckly factory re work yesterday ,here was a video and some pics .
they are doing top case now ,already finish 20% .
plate and accent working on it too ,we get slow process but it will move soomth soon
next update will on the end of this month
thanks for you understanding and greeting,if anyone have question plz pm me on discord
hope you all were safe
https://imgur.com/a/aynP5kp (https://imgur.com/a/aynP5kp)
Post by: grundlemere on Tue, 10 March 2020, 08:24:25
Stay safe!
Post by: trikoi00 on Tue, 10 March 2020, 21:20:37
Sent from my SM-N975F using Tapatalk
Post by: excluisve on Tue, 10 March 2020, 21:48:45
Thanks for the update, E. We're glad to hear you're safe and your folks are back to work. Virus is starting to hit in US now so it's hopeful to hear things are returning to normal in China.Thanks ! hope you all safe !
Stay safe!
Post by: changyung on Fri, 27 March 2020, 22:03:28
Post by: Glychd on Sun, 29 March 2020, 18:17:30
Post by: telly on Tue, 31 March 2020, 12:49:57
Post by: arjun on Wed, 01 April 2020, 20:58:24
Post by: evorus5 on Sat, 04 April 2020, 22:04:23
Due to the virus i need to let this go
msg me on discord
evorus #5336
Post by: baoduy23 on Sun, 05 April 2020, 02:38:11
Thank you so much :D
Post by: NeroGrave on Sun, 05 April 2020, 03:10:16
Post by: dumpling420 on Wed, 08 April 2020, 21:41:59
Post by: excluisve on Fri, 10 April 2020, 11:22:54
Top case now ,already finish around 45% ,Bottom case 30%
All plate and side weight almost done 95% finished
Next process was :nametag and inner gakset .
https://imgur.com/a/3not2Qo (https://imgur.com/a/3not2Qo)
Estimated delivery time :July
Have any question plz contact me on discord
Thanks all
Post by: bball2 on Fri, 10 April 2020, 11:48:12
Post by: Vyndem on Fri, 10 April 2020, 12:35:30
Post by: japancakes on Fri, 10 April 2020, 23:25:47
Post by: shrimp on Mon, 13 April 2020, 21:21:37
Post by: HungerMechanic on Mon, 13 April 2020, 22:21:43
If you buy a spot in the GB, how does excluisve know to ship it to you instead? Do you change buyer details in a Google document?
Post by: shrimp on Tue, 14 April 2020, 01:48:15
Can someone explain briefly how selling spots works?
If you buy a spot in the GB, how does excluisve know to ship it to you instead? Do you change buyer details in a Google document?
You contact Exclusive that you are transferring the spot and have received payment from the person buying the spot
Post by: ilemondrop on Tue, 14 April 2020, 09:24:24
Post by: olivavek on Sun, 19 April 2020, 10:42:29
E-white ALU with e-yellow accent and weight.
Hotswap PCB WK
No inner middle
No Extras
Sold, thanks.
Post by: Vadurr on Sun, 19 April 2020, 13:23:26
Post by: Sagan on Sun, 19 April 2020, 20:29:43
Post by: bball2 on Sun, 19 April 2020, 22:43:18
Starts at 1:42ish
Post by: baoduy23 on Mon, 20 April 2020, 04:12:59
Thank guys :D
Post by: Curcium on Mon, 20 April 2020, 08:47:31
Have a Rama M60-A LNY Kuro GB Spot if someone wants to trade.
If your not interested in trading I would outright buy the GB Spot aswell.
Please Pm me through Discord (Username: Curcium#1605
Ty guys! :thumb:
Curcium
Post by: yakbox on Mon, 20 April 2020, 10:52:40
You can contact me here, discord (techyak#7321), or reddit (techyak). Don't know how I slept on this - thanks for considering!
Post by: brookwin on Mon, 20 April 2020, 23:58:58
Post by: excluisve on Wed, 22 April 2020, 08:36:39
Just remind ,i am not log in here frquently so if you have any question and problem plz contact me on discord
glad to help you .thanks
Exclusive#8666
https://www.instagram.com/exclusive1993/ (https://www.instagram.com/exclusive1993/)
Post by: FoxFire007 on Thu, 23 April 2020, 02:02:18
Sent from my SM-G965U using Tapatalk
Post by: Zeelobby on Thu, 23 April 2020, 09:46:50
Post by: sirieous on Thu, 23 April 2020, 22:53:51
Post by: trikoi00 on Thu, 23 April 2020, 23:47:55
I have a spot to let go. Purple WKL with Hotswap PCB, Ti Plate. Brass tag, Weight and gasket. Please PM me.Bump.
Sent from my SM-N975F using Tapatalk
Sent from my SM-N975F using Tapatalk
Post by: JMak on Sun, 26 April 2020, 12:08:36
Post by: hpkb on Sun, 26 April 2020, 21:34:48
Post by: Arithmetics on Tue, 28 April 2020, 10:31:11
https://www.twitch.tv/videos/603484241
Post by: Psyoshi on Fri, 01 May 2020, 12:00:00
Post by: Vyndem on Fri, 01 May 2020, 14:52:17
Post by: vidoardes on Thu, 14 May 2020, 13:31:18
Spot number 59
E-Black top and bottom
Brass Plate, accent & Side weight + extra e-yellow accent
Solder PCB
No Gasket
$495
SOLD
Post by: Kev_TKL on Sat, 16 May 2020, 17:12:07
Post by: Slimjim095 on Sun, 17 May 2020, 04:28:33
Post by: fc038263 on Wed, 20 May 2020, 12:31:58
Post by: n0m1s_0711 on Fri, 22 May 2020, 02:22:35
Keep up the great work.
Post by: zian_ on Fri, 22 May 2020, 17:04:19
Any update on the timing on when the Alu versions will be send out ?
Keep up the great work.
Probably not for a while.
Post by: wunderninja on Fri, 29 May 2020, 01:08:08
Any update on the timing on when the Alu versions will be send out ?
Keep up the great work.
Keep up with the news in the discord server.
Post by: the_onlyhope on Sat, 30 May 2020, 23:02:59
Post by: Zach on Sun, 31 May 2020, 12:23:59
What's the discord server?
https://discord.gg/udmn6dn
Lmk if it doesn't work
Post by: Arithmetics on Mon, 01 June 2020, 10:45:30
here's updates for non discord:
UPDATE1:
Updated : 10/4
Top case now ,already finish around 45% ,Bottom case 30%
All plate and side weight almost done 95% finished
Next process was :nametag and inner gakset .
https://imgur.com/a/3not2Qo
[/youtube
Estimated delivery time :July
Have any question plz pm me on discord
Thanks all
UPDATE 2:
Updated 26/5
I ‘ve been went factory yesterday and those were some pictures,all works almost done .except all brass version and TI plate .factory are do the qc and polish works ,next week I will go there take all back home and do the qc again .let us wait next updates news !thanks all orders waiting and you patients.Keep safe !
Post by: Arithmetics on Fri, 12 June 2020, 12:54:40
Post by: _rubik on Fri, 12 June 2020, 13:38:52
Exclusive is still predicting july delivery in the discord
That's great to hear! Do we know when he is collecting addresses? I don't think I've submitted mine already...
Post by: zian_ on Fri, 12 June 2020, 13:52:39
Exclusive is still predicting july delivery in the discord
That's great to hear! Do we know when he is collecting addresses? I don't think I've submitted mine already...
Probably when the shipping invoices are sent.
Post by: excluisve on Sat, 13 June 2020, 11:58:50
but no worry you orders , will confirm address before shipping
Post by: AvoidingYou on Thu, 18 June 2020, 19:23:02
Post by: Nothatso on Thu, 18 June 2020, 21:13:56
Once ready to ship i will announce here ,i am working it now so not have much time check news
but no worry you orders , will confirm address before shipping
Will plate and PCB extras be available before the keyboard ships? It would probably save on shipping costs...
Post by: Chigorin on Thu, 02 July 2020, 22:40:21
Post by: Nevermore012 on Sun, 05 July 2020, 18:17:49
Sent from my iPhone using Tapatalk
Post by: BuddhaBen on Wed, 05 August 2020, 17:58:37
Post by: excluisve on Sun, 16 August 2020, 11:23:07
Discord ID: Exclusive#8666
1. If you chose "Anodizing Purple" color option:
Due to the complexity (it's mixing 3 colors) and inconsistency during production of anodizing purple color, I paid out of my own pocket for make it e-purple instead for whoever chose this option.
E-purple is more consistent, and the color should match what we wanted better (we were customizing e-purple with the ano version as the reference to minimize the color difference), with a smoother surface.
You can checkout the photo https://i.imgur.com/AB4EB9t.jpg for the look of final production.
Contact me at Exclusive#8666 on Discord if you still have any question about this.
2. If you chose hotswap PCB (default PCB and/or extra PCB):
There are two options for the hotswap PCB:
- WK (winkey): https://i.imgur.com/rRhqnOm.jpg
- WKL (winkeyless): https://i.imgur.com/ipkNmpO.jpg
We will ship the corresponding hotswap PCB based on the version of the case you chose: if you have WK case, we will ship the WK hotswap PCB; if you have WKL case, we will ship the WKL hotswap PCB.
3. The ordering of shipping:
We will ship based on the ordering in the order check sheet: https://bit.ly/3iPfd3T
(https://i.imgur.com/sx2wal6.jpg)
(https://i.imgur.com/h9BgE81.png)
First batch will be from row 3 to row 53 (Customer ID: CID-001 ~ CID-049) (User ID: jshufelt ~ kronograf).
- If your order is in the first batch, please message me at Exclusive#8666 on Discord.
- If your order is after row 53, please wait for next shipping update! (please do not dm me right now if you are not in this batch)
4. Please fill out the following shipping info and double check carefully, especially your real name and phone number.
The keyboard will be shipped via DHL, and the shipping fee will be based on how heavy your package is and where you are.
The default declared value will be $60, and please change it if you have other special request for the undervalue declaration.
The standard format for shipping info you need to send to @Exclusive#8666 on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 3-jshufelt (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60 (default is $60, edit this if you want less or more value declaration)
Note: (if you have multiple orders, also add your other row-userID here, e.g. 4-jshufelt, 5-jshufelt, ...)
5. About extra parts (it will be after all existing keyboard kits shipped):
It will be very time consuming to message me about the extra parts if everyone is asking through message. Thus we decide to run the extra parts on our new Shopify store. All the available extra parts, inventories, color options will be on the Shopify store. You can checkout the store after we finished shipping all the GB orders, and the estimated shipping fee for extras will be around $20~$30. The store is currently under construction, thanks to @ZongZiWang
======
For any information that you want to send to me or any question that you have, please contact me on Discord. I rarely check Geekhack inbox, so please use Discord for any message.
I will check your message but may not reply or acknowledge, as I'll give you 2 days to send shipping info to me. After 2 days, I'll ship the orders of the first batch, and then you will receive shipped notification about DHL from Hong Kong. If I didn't get your information by then, I'll list your ID in the next announcment on Geekhack and Discord.
At the end...
======Statement at GB======
Quote
Each boards cant be 100% but i will try my ability do it perfectly .I'm doing it as possible as i can ,same as my previous GBs it's just that there will not be 100% perfectly
if you cant accept a little Inevitable ,especially PVD stuff (Quality is hard to control )please thinks twice
Again, thanks for the patience and long waiting! Thank you for all your support!
======Next Keyboard: E7-V2!!!======
Our next product E7-V2 is about to get IC. We will try a more scientific and efficient production plan to improve the quality and delivery lead time. Stay tuned and follow that if you love my products!
Post by: sirieous on Sun, 16 August 2020, 12:44:59
Sent from my Pixel 2 XL using Tapatalk
Post by: zian_ on Sun, 16 August 2020, 13:57:24
Will there be extra kits available or extra b and c stock?
Even before invoices are out for R1 GB shipping. Yikes.
Post by: bball2 on Sun, 16 August 2020, 21:43:33
Post by: Stich on Tue, 25 August 2020, 01:02:49
Post by: excluisve on Tue, 25 August 2020, 11:55:18
(https://i.imgur.com/1PNlHbO.png)
(https://i.imgur.com/00Wbg6E.png)
Pc batch will be from row 3 to row 52 (User ID:xor#4432 ~ nuno99costa).
- If your order is in the first batch, please message me at Exclusive#8666 on Discord.
- If your order is after row 52, please wait for next shipping update! (please do not dm me right now if you are not in this batch)
1.Please fill out the following shipping info and double check carefully, especially your real name and phone number.
The keyboard will be shipped via DHL, and the shipping fee will be based on how heavy your package is and where you are.
The default declared value will be $60
The standard format for shipping info you need to send to @Exclusive#8666 on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 3-xor#4432 (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60 (default is $60, edit this if you want less or more value declaration)
Note: (if you have multiple orders, also add your other row-userID here, e.g. 3-xor#4432, 5-xor#4432, ...)
DM via discord thanks !
Post by: excluisve on Tue, 25 August 2020, 11:59:50
Thanks for the update :thumb:
:thumb: :thumb:
Post by: excluisve on Thu, 03 September 2020, 00:59:38
Alu orders #54-#103
(https://i.imgur.com/PZRzGhR.png)
(https://i.imgur.com/QAFM01S.png)
The standard format for shipping info you need to send to @Exclusive on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 54-kiyoboardasmr (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60
Post by: evorus5 on Fri, 04 September 2020, 00:36:19
Discord: Evorus#5336
Post by: excluisve on Mon, 07 September 2020, 06:04:35
Alu orders #104-#153
(https://i.imgur.com/QgxeRs8.png)
(https://i.imgur.com/4AUO3Ei.png)
The standard format for shipping info you need to send to @Exclusive on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 104-Mr.Monkey (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated.
Post by: excluisve on Mon, 14 September 2020, 07:32:05
Alu orders #154-#203
(https://i.imgur.com/GaZDuqL.png)
(https://i.imgur.com/fh7Wvke.png)
The standard format for shipping info you need to send to Exclusive#8666 on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 154-speaktobrett (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated.
Post by: excluisve on Fri, 18 September 2020, 09:31:53
Alu orders #204-#255
If you keyboard not shipped on last batch ,it may be shipped on this batch or delay .
(https://i.imgur.com/aDgDoMo.png)
(https://i.imgur.com/Evw7dxd.png)
The standard format for shipping info you need to send to Exclusive#8666 on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 154-speaktobrett (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated.
Post by: evorus5 on Mon, 21 September 2020, 01:46:26
black wkl tkl with brass accessories
Discord: Evorus#5336
Post by: excluisve on Thu, 24 September 2020, 01:51:29
Alu orders #256-#305
(https://i.imgur.com/ivnbyJs.png)
(https://i.imgur.com/5Eeb5Qx.png)
If you keyboard not shipped on last batch ,it may be shipped on this batch or delay .
The standard format for shipping info you need to send to Exclusive#8666 on Discord
PayPal ID/email: xxx@yyy.zzz (I will invoice you based on this email address)
Order check sheet ID: 256-ludd3 (row-userID)
Real name:
Phone number:
Shipping address:
Zip Code:
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated.
Post by: bball2 on Thu, 24 September 2020, 10:29:26
Really enjoyed building this keyboard, the typing experience is fantastic :thumb:
Stabs - pink C3's
Switches - lubed H1 linears
Keycaps - GMK 9009 R3
Cable - custom GX16 connector with coil
Post by: HungerMechanic on Thu, 24 September 2020, 11:39:47
You configured this board perfectly for 9009, and found a way to keep the extra F key in theme.
Post by: aadk5 on Mon, 05 October 2020, 15:26:41
Post by: excluisve on Sat, 10 October 2020, 20:07:38
(https://i.imgur.com/73T8IrM.png)
(https://i.imgur.com/0H8ovNf.png)
If you keyboard not shipped on last batch ,it may be shipped on this batch or delay .
Alu orders #306-#355
The standard format for shipping info you need to send to @Exclusive on Discord
PayPal ID/email: xxx@yyy.zzz
Order check sheet ID: 306-whatplugs (row-userID)
Real name:
Phone number:
Shipping address: （city/state/street)
Zip Code:(make sure you zip code match the city)
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated
Post by: excluisve on Mon, 19 October 2020, 23:03:30
(https://i.imgur.com/CoU3Yjq.png)
(https://i.imgur.com/EStCHGM.png)
If you keyboard not shipped on last batch ,it may be shipped on this batch or delay .
Alu orders #356-#406
The standard format for shipping info you need to send to @Exclusive on Discord
PayPal ID/email: xxx@yyy.zzz
Order check sheet ID: 356-Chimes (row-userID)
Real name:
Phone number:
Shipping address: （city/state/street)
Zip Code:(make sure you zip code match the city)
Country:
Under value: $60
if you have multiple orders, also add your other row-userID here
# Send me you payment screenshot .in case somone being impersonated