nice! but seems some format error happened!Thanks, what went wrong?is it imgur or pictures in the thread?
love revo team :D
nice! but seems some format error happened!Thanks, what went wrong?is it imgur or pictures in the thread?
love revo team :D
Some HTML tags in this thread are not applied properly. For example, explanation of No.2 and No.3.
I like the mystery TKL, but i dont like the random element of it. Any chance youd run that - but allowing us to pick colors etc. Random is fine, but i dont think people want to spend hundreds of dollars and end up with a color theyre not excited about.color can be chosen. They just dont know what it looks like.Anyway,if i run it again,there will be nothing mystery about it anymore.
Voted for Corgi, Mystery TKL and Samoye.Nothing Fancy so they all in the reasonable price range.
Almost everything looks cool, but I lile those the most.
Let's hope we stay in a reasonable price range :thumb:
7,Code name: Samoye
1800 layout custom made. No need to say too much.Just see pictures:
Voted for Corgi, Mystery TKL and Samoye.Nothing Fancy so they all in the reasonable price range.
Almost everything looks cool, but I lile those the most.
Let's hope we stay in a reasonable price range :thumb:
Voted Samoyed. What is that blue plastic square in blue? :))It's alu and it's a design to look better. ;D
Samoye!Aye-aye caption. ;D;D ;D
Will it be similar to Revo RJ in pricing?
Raymond, these are all gorgeous boards!!!Thanks,my man. we can do pottery coating on everything,just not sure how people like it...The color is quite different from anode colors. Some says it looks like a painted plastic case rather than a alu case. However it does have a lot of colors and it can be done in almost every colors. We can chose it from any kind of colors chips.
I'm a sucker for 1800s, so really pulling for that. LOVE the chamfer on the top case... any chance that could get the cool surface finish of the one-body 60%? :) I would sell off whatever boards/ organs/ etc are necessary to buy that if so.
Edit: also- more and perhaps some funky colors on the 1800, please. Mix and match two-tones. :thumb:
Also, the "something mystery" limited to five boards. Yes please. Is that going to happen? (It wasn't a voting choice on form)
Awesome stuff as always Revo!RJ pad will be designed later after i shipped out RJ and if ppl are telling me to do a pad matching RJ i will.No problem. :thumb: :thumb: :thumb:
Are you still going to do the RevoPad as well?
My favorites are the pottery 60% and the Corgi as well as the mystery tkl too!
You are the best!
How does the 60% one-body case support the usual 60% PCBs?
I really wish to see a HHKB-style 40% keyboard. Much like JD45 but with better case design. Like even bezel, sloped side profile, etc.
They all look awesome.
Shameless plug for a layout I'd love to see you do (and have been begging anyone to do for some time):Show Image(http://ww4.sinaimg.cn/mw690/bed1d077gw1ev00jc3614j20rs0iiaef.jpg)
Raymond, these are all gorgeous boards!!!Thanks,my man. we can do pottery coating on everything,just not sure how people like it...The color is quite different from anode colors. Some says it looks like a painted plastic case rather than a alu case. However it does have a lot of colors and it can be done in almost every colors. We can chose it from any kind of colors chips.
I'm a sucker for 1800s, so really pulling for that. LOVE the chamfer on the top case... any chance that could get the cool surface finish of the one-body 60%? :) I would sell off whatever boards/ organs/ etc are necessary to buy that if so.
Edit: also- more and perhaps some funky colors on the 1800, please. Mix and match two-tones. :thumb:
Also, the "something mystery" limited to five boards. Yes please. Is that going to happen? (It wasn't a voting choice on form)
About the mystery board i will show it in a couple of days. It's limited to 5 now,we'll try to make it 10 at best. ;D
It actually looks really cool in person. It's smooth when you touch it and i like it. I am just not so sure how other people like it.That's why i ask to do a one-body 60% case. This way anyone interested could try it with the cheapest price.And everyone could use a 60%...It's fun to watch and it's a great present for wife/girlfriend/daughter. Haha.Raymond, these are all gorgeous boards!!!Thanks,my man. we can do pottery coating on everything,just not sure how people like it...The color is quite different from anode colors. Some says it looks like a painted plastic case rather than a alu case. However it does have a lot of colors and it can be done in almost every colors. We can chose it from any kind of colors chips.
I'm a sucker for 1800s, so really pulling for that. LOVE the chamfer on the top case... any chance that could get the cool surface finish of the one-body 60%? :) I would sell off whatever boards/ organs/ etc are necessary to buy that if so.
Edit: also- more and perhaps some funky colors on the 1800, please. Mix and match two-tones. :thumb:
Also, the "something mystery" limited to five boards. Yes please. Is that going to happen? (It wasn't a voting choice on form)
About the mystery board i will show it in a couple of days. It's limited to 5 now,we'll try to make it 10 at best. ;D
Yeah, the pottery coating is quite interesting. I have looked at it a couple of times today on bigger screens than my phone and went back and forth on how much I like it. It's different that's for sure, and generally, different is good. :) I think I really like it, but can also see where it looks a little like plastic.
Do you like the pottery coating compared with anodized, Raymond? Doubt and of us have ever seen a board finished like that.
Also, just my opinion, but the 1800 could use a bit more snazzy weight if that gets run. For some reason that one is a bit less exciting than the Corgi/ Mystery TKL weights.
Overall though, this is really great work. Never seen an IC quite like this. Thank you for bringing so many amazing boards to us super-nerds!! :thumb:
It actually looks really cool in person. It's smooth when you touch it and i like it. I am just not so sure how other people like it.That's why i ask to do a one-body 60% case. This way anyone interested could try it with the cheapest price.And everyone could use a 60%...It's fun to watch and it's a great present for wife/girlfriend/daughter. Haha.Raymond, these are all gorgeous boards!!!Thanks,my man. we can do pottery coating on everything,just not sure how people like it...The color is quite different from anode colors. Some says it looks like a painted plastic case rather than a alu case. However it does have a lot of colors and it can be done in almost every colors. We can chose it from any kind of colors chips.
I'm a sucker for 1800s, so really pulling for that. LOVE the chamfer on the top case... any chance that could get the cool surface finish of the one-body 60%? :) I would sell off whatever boards/ organs/ etc are necessary to buy that if so.
Edit: also- more and perhaps some funky colors on the 1800, please. Mix and match two-tones. :thumb:
Also, the "something mystery" limited to five boards. Yes please. Is that going to happen? (It wasn't a voting choice on form)
About the mystery board i will show it in a couple of days. It's limited to 5 now,we'll try to make it 10 at best. ;D
Yeah, the pottery coating is quite interesting. I have looked at it a couple of times today on bigger screens than my phone and went back and forth on how much I like it. It's different that's for sure, and generally, different is good. :) I think I really like it, but can also see where it looks a little like plastic.
Do you like the pottery coating compared with anodized, Raymond? Doubt and of us have ever seen a board finished like that.
Also, just my opinion, but the 1800 could use a bit more snazzy weight if that gets run. For some reason that one is a bit less exciting than the Corgi/ Mystery TKL weights.
Overall though, this is really great work. Never seen an IC quite like this. Thank you for bringing so many amazing boards to us super-nerds!! :thumb:
If 1800 is going to happen i will have the weight changed. Like Corgi or Mystery TKL. How about that!
I bring IC like this mainly because i dont know what to do next and i like suggestions so i can change the OG design to make it better. I really appreciate everyone's input! :thumb: :thumb: :thumb:
They all look awesome.This without the numpad would be amazing. I already bought an RJ, let me buy something like this too Raymond!
Shameless plug for a layout I'd love to see you do (and have been begging anyone to do for some time):Show Image(http://ww4.sinaimg.cn/mw690/bed1d077gw1ev00jc3614j20rs0iiaef.jpg)
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I think I still prefer the Samoyed but that's some good **** right there. Damn.Samoyed is winning at this point. And i will only make dolch 1800 for 5 kits(10 tops). Factory are not willing to do it cause the it's too complex
Voted Corgi with pottery finish <3<3Potter finish on plate is not likely to happen because the pottery layer it too thick for a plate...
Loving the colorful finish and all the options it creates (white boards finally)
Is it possible to offer pottery finish on plates btw?
That would be a game changer.
I think I still prefer the Samoyed but that's some good **** right there. Damn.Samoyed is winning at this point. And i will only make dolch 1800 for 5 kits(10 tops). Factory are not willing to do it cause the it's too complex
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
1. Yes I'd like underglow so thank you for including it!
2. I like the idea of a logo but most people seem to not be super keen on branding like that - maybe having it on the weight or something like that instead might make more people happy.
3. I'd like a weight of course.
4. Happy you're "stuck" with Samoyed!
5. I'd love a pure white finish. No one ever does that and I really want one super badly, all my boards are black (except my beige 660C and 980C) so if there's any way you can do it in white I'm over the moon. If not, then beige will do.
Love your feedback, Thanks.
The pure white can be done. Just look at the one-body 60% case. It' will be like that. But that is too white and it's hard to pair keycaps. And it's not anode so maybe i'll have 2 kind of version of it. One using pottery finish,one using normal anode.
As for the logo,i know people may not like it. But i think i'll put it there anyway. It will be flush. You'll see. I know i can't make everybody happy but it will stand out, i am sure of it.
There is a weight in it already but i think i can do better about it. Just need more time to think about it.... :D :D :D
Yep, white colour like the first case. You'll have to excuse me for my English, sometimes i got people confused. HahaLove your feedback, Thanks.
The pure white can be done. Just look at the one-body 60% case. It' will be like that. But that is too white and it's hard to pair keycaps. And it's not anode so maybe i'll have 2 kind of version of it. One using pottery finish,one using normal anode.
As for the logo,i know people may not like it. But i think i'll put it there anyway. It will be flush. You'll see. I know i can't make everybody happy but it will stand out, i am sure of it.
There is a weight in it already but i think i can do better about it. Just need more time to think about it.... :D :D :D
Can't seem to find the one-body 60% case picture, would you mind linking it please?
I agree though, it's a bit hard to pair keycaps but it's a very exotic look, no one ever does white with alu cases etc since it's impossible to anode it right? Would have to powder coat, micro arc oxidise or pottery finish like you're planning correct? That's what I've heard at least, I don't know much about the subject!
As long as it doesn't look almost silver/beige like some cases do even though they're described as "white" then I'm very happy.
I have no doubt you'll figure out a way to handle the logo and weight in a classy way, very excited to see this project develop further!
Edit: oh you meant like the 1st case in the OP style of pottery coating not the colour, thought you meant you had pictures of it with white colour somewhere else, my bad!
Yep, white colour like the first case. You'll have to excuse me for my English, sometimes i got people confused. Haha
I can assure you it's a pure white not silver-ish or grey-ish color. But it's also has to be done by the pottery coating. The surface is smoother than normal Anode Aluminum. We'll have to see how people like it.
If you brought a pure white one. You'll have to find a keyset that is really bright and have 1800 support. Is there many options out there?
They all look awesome.Oh my God. It's beautiful.
Shameless plug for a layout I'd love to see you do (and have been begging anyone to do for some time):Show Image(http://ww4.sinaimg.cn/mw690/bed1d077gw1ev00jc3614j20rs0iiaef.jpg)
So sad I missed Dr.D the first time! I love all your designs!
For Corgi, what colors are being considered?Well. look RJ's color. It will be something like that...
Sent from my iPhone using Tapatalk
They all look awesome.Oh my God. It's beautiful.
Shameless plug for a layout I'd love to see you do (and have been begging anyone to do for some time):Show Image(http://ww4.sinaimg.cn/mw690/bed1d077gw1ev00jc3614j20rs0iiaef.jpg)
Sent from my LG-H918 using Tapatalk
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
1. I like the idea of an optional acrylic layer.
2. I would put logo on the weight and keep the keyboard clean. IMO the D logo would look a bit tacky in most settings.
3. Yes
4. Samoyed +1. Love the other 1800 in your pics as well.
5. I like the idea of a pure white but dislike the glossy/pottery finish look. I would need to see a few good examples/pics to sway me one way or the other.
For Corgi, what colors are being considered?Well. look RJ's color. It will be something like that...
Sent from my iPhone using Tapatalk
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
1. I like the idea of an optional acrylic layer.
2. I would put logo on the weight and keep the keyboard clean. IMO the D logo would look a bit tacky in most settings.
3. Yes
4. Samoyed +1. Love the other 1800 in your pics as well.
5. I like the idea of a pure white but dislike the glossy/pottery finish look. I would need to see a few good examples/pics to sway me one way or the other.
Raymond will have to confirm, but regarding question #2, in my mind, he's asking about this Revo logo already on the front of the Samoyed.Show Image(https://uploads.tapatalk-cdn.com/20170719/2deb91dd5f2303bb5b5a717b492ef9d3.jpg)
Doing that logo with an inlaid piece like the "D" was in Dr. D could give a little splash of contrast and look really cool, IMO.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
1. I like the idea of an optional acrylic layer.
2. I would put logo on the weight and keep the keyboard clean. IMO the D logo would look a bit tacky in most settings.
3. Yes
4. Samoyed +1. Love the other 1800 in your pics as well.
5. I like the idea of a pure white but dislike the glossy/pottery finish look. I would need to see a few good examples/pics to sway me one way or the other.
Raymond will have to confirm, but regarding question #2, in my mind, he's asking about this Revo logo already on the front of the Samoyed.Show Image(https://uploads.tapatalk-cdn.com/20170719/2deb91dd5f2303bb5b5a717b492ef9d3.jpg)
Doing that logo with an inlaid piece like the "D" was in Dr. D could give a little splash of contrast and look really cool, IMO.
IMO the Revo logo draws my eye a bit too much due to the rule of thirds. The hefty build quality/anode and beveled edges are enough to distinguish the design. IMO Less is more. Maybe shrink the debossed Revo logo down a bit and place it on the beveled edge.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Some points which i find are really important for a custom keyboard.
- Do not enforce led lighting. Say no acryllic pieces or defusors. If somody likes rgb, he can always instal leds in switches.
- No visible lines where top piece and bottom piece come together. These lines must be hidden. For example on Duck's keyboards you can see these lines only if you flip keyboard. The only exception is the Dr.D where it makes sense with middle piece.
Will the RGB PCBs for Dr. D R2 be available separately? If they're compatible with R1, I would like to upgrade my board. :DYes, i can sell you one right now. Please give me a PM.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
1) I like the acrylic diffuser. It's why I got in for MIRA.
2) I'd prefer an engraved logo a la TGR/LZ-SE.
3) Nothing wrong with good ol' bar weight.
4) Nah, no need for impact 1800.
5) Personally not a fan of microarc. It's too fragile for my liking. Then again, I'll probably buy silver anyway, so what do I know.
additional colors? yes. Purple? Not at the moment. Trust me you dont want a purple board....For Corgi, what colors are being considered?Well. look RJ's color. It will be something like that...
Sent from my iPhone using Tapatalk
Got it, thanks for the reply. Would you consider additional colors? Options like green or purple would be great (between those two, I'd personally vote for purple).
Hoping to continue to see some great case designs from you; quite the portfolio of ideas so far.
Sent from my iPhone using Tapatalk
Some points which i find are really important for a custom keyboard.I totally agree with no line in between top and bottom pieces.
- Do not enforce led lighting. Say no acryllic pieces or defusors. If somody likes rgb, he can always instal leds in switches.
- No visible lines where top piece and bottom piece come together. These lines must be hidden. For example on Duck's keyboards you can see these lines only if you flip keyboard. The only exception is the Dr.D where it makes sense with middle piece.
All your TKL designs are amazing! I also voted for Mystery! Dr.D is cool for different color middle and top layers!So sad I missed Dr.D the first time! I love all your designs!
Thanks sir. However people are more into mystery TKL now. Just a few vote for Dr.D R2....
Would be great to cut a little opening on the plate to support switch top removal. I now regret having installed Gateron Browns on my Revo Dr.D but struggle to find a time to desolder 80 of them.Well,it's not hard to support it but we don't like it. Our boards used to be switch top removable but now there's none of them support that. It's just not that good.Have a lot of problems.I guess you have to find time to desolder your Dr.D...Sad...Still the plate is good enough for now. Not likely to make any change.
Show Image(http://i.imgur.com/lMdAPkn.jpg)
wowowwo let us pick the badge color!
also is it just me or is this photo making an optical illusion?Show Image(http://i.imgur.com/f8K16RZ.jpg)
Show Image(http://i.imgur.com/lMdAPkn.jpg)
wowowwo let us pick the badge color!
also is it just me or is this photo making an optical illusion?Show Image(http://i.imgur.com/f8K16RZ.jpg)
What i want to do with that badge is change it to a sticker and make my logo like that...
Show Image(http://i.imgur.com/lMdAPkn.jpg)
wowowwo let us pick the badge color!
also is it just me or is this photo making an optical illusion?Show Image(http://i.imgur.com/f8K16RZ.jpg)
What i want to do with that badge is change it to a sticker and make my logo like that...
How are the vote results looking so far? Personally only interested in Samoyed :thumb:
Show Image(http://i.imgur.com/lMdAPkn.jpg)
wowowwo let us pick the badge color!
also is it just me or is this photo making an optical illusion?Show Image(http://i.imgur.com/f8K16RZ.jpg)
What i want to do with that badge is change it to a sticker and make my logo like that...
How are the vote results looking so far? Personally only interested in Samoyed :thumb:
Samoyed is taking the lead... so it's good for ya! haha
Show Image(http://i.imgur.com/lMdAPkn.jpg)
wowowwo let us pick the badge color!
also is it just me or is this photo making an optical illusion?Show Image(http://i.imgur.com/f8K16RZ.jpg)
What i want to do with that badge is change it to a sticker and make my logo like that...
I like the badge as it is. In my opinion it's perfect.
Quote
I like the badge as it is. In my opinion it's perfect.
(Attachment Link)
How about this?
Quote
I like the badge as it is. In my opinion it's perfect.
(Attachment Link)
How about this?
Quote
I like the badge as it is. In my opinion it's perfect.
(Attachment Link)
How about this?
Would be great to cut a little opening on the plate to support switch top removal. I now regret having installed Gateron Browns on my Revo Dr.D but struggle to find a time to desolder 80 of them.Well,it's not hard to support it but we don't like it. Our boards used to be switch top removable but now there's none of them support that. It's just not that good.Have a lot of problems.I guess you have to find time to desolder your Dr.D...Sad...Still the plate is good enough for now. Not likely to make any change.
Would be great to cut a little opening on the plate to support switch top removal. I now regret having installed Gateron Browns on my Revo Dr.D but struggle to find a time to desolder 80 of them.Well,it's not hard to support it but we don't like it. Our boards used to be switch top removable but now there's none of them support that. It's just not that good.Have a lot of problems.I guess you have to find time to desolder your Dr.D...Sad...Still the plate is good enough for now. Not likely to make any change.
What is the downside of switch top removable? I can think of wobbling.
There's not really a downside to switch top removable or problems I can think of, I won't purchase a board unless the plate allows for switch top opening. My TX-CP and TX1800 all support switch top opening and no problems what so ever.Would be great to cut a little opening on the plate to support switch top removal. I now regret having installed Gateron Browns on my Revo Dr.D but struggle to find a time to desolder 80 of them.Well,it's not hard to support it but we don't like it. Our boards used to be switch top removable but now there's none of them support that. It's just not that good.Have a lot of problems.I guess you have to find time to desolder your Dr.D...Sad...Still the plate is good enough for now. Not likely to make any change.
What is the downside of switch top removable? I can think of wobbling.
What is the downside of switch top removable? I can think of wobbling.
btw,i want to sell 2 samples. Tiffany color one-body case and husky with RGB pcb.
btw,i want to sell 2 samples. Tiffany color one-body case and husky with RGB pcb.
If I would have one small suggestion for team Revo though, is it possible to move the branding to a discrete place like on the bottom of the board or on one of the sides (or or perhaps inside, engraved onto the weight or something? I completely understand the desire to have your brand recognition and putting your work out there for people to see, but I know that for the most part I would prefer my keyboards to look very clean and minimal, and branding usually gets in the way and distracts from the clean lines of the product.I will think about it,sir. ;D ;D ;D
Let me know what you think ;)
it is a pottery coated. dont support ISO. and it's all gone. sad...btw,i want to sell 2 samples. Tiffany color one-body case and husky with RGB pcb.
Interested in the Husky one, is it pottery coated? what color? Does it support ISO? Too many stars have to align to meet my needs...
Thanks
If I would have one small suggestion for team Revo though, is it possible to move the branding to a discrete place like on the bottom of the board or on one of the sides (or or perhaps inside, engraved onto the weight or something? I completely understand the desire to have your brand recognition and putting your work out there for people to see, but I know that for the most part I would prefer my keyboards to look very clean and minimal, and branding usually gets in the way and distracts from the clean lines of the product.the problem is i have to put the logo somewhere. it's not good to put it on the weight and i really can't think of anywhere great. What i want is change it to inlaid logo so if you really dont want it to stand out you can chose the same color for it.
Let me know what you think ;)
If I would have one small suggestion for team Revo though, is it possible to move the branding to a discrete place like on the bottom of the board or on one of the sides (or or perhaps inside, engraved onto the weight or something? I completely understand the desire to have your brand recognition and putting your work out there for people to see, but I know that for the most part I would prefer my keyboards to look very clean and minimal, and branding usually gets in the way and distracts from the clean lines of the product.the problem is i have to put the logo somewhere. it's not good to put it on the weight and i really can't think of anywhere great. What i want is change it to inlaid logo so if you really dont want it to stand out you can chose the same color for it.
Let me know what you think ;)
Hopefully the mystery TKL comes out soon :)
Hopefully the mystery TKL comes out soon :)
Does it have a relevance, if Samoyed is going to be the chosen one ? :p
Does it have a relevance, if Samoyed is going to be the chosen one ? :p
Is it possible to fit an RGB PCB from the Husky or Dr.D in the Mystery TKL case? If so I'm gonna start saving now...It's possible...highly likely
a little update here.
After talking to CNC shop, A inlaid logo for Samoyed is impossible. So we think we will remove the logo.
And i have found some prototype here. Sorry for the pictures, they are taken by my phone.
(Attachment Link)
(Attachment Link)
(Attachment Link)
a little update here.
After talking to CNC shop, A inlaid logo for Samoyed is impossible. So we think we will remove the logo.
And i have found some prototype here. Sorry for the pictures, they are taken by my phone.
(Attachment Link)
(Attachment Link)
(Attachment Link)
Very tasteful and unique engraved case edge insert. It looks fantastic :thumb:
(Edit) I wanted to add that the edge insert reminds me of a brass habaki on a katana sword. Very cool :cool:
Got a sample from Raymond today! What a beast. The new glossy finish is smooth and vibrant. Typing also sounds substantial as you would expect from a thick high profile case. Now looking for a palm rest for the first time...Thanks for these great pictures. I really love it. :thumb: :thumb: :thumb:
Really dig the TKL & 1800 :)
Are these coming soon? I am dying to move on from my decked out KUL ES-87 :)
Looks heavy as hell... I like It!
Sent from my iPhone using Tapatalk
Got a sample from Raymond today! What a beast. The new glossy finish is smooth and vibrant. Typing also sounds substantial as you would expect from a thick high profile case. Now looking for a palm rest for the first time...
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will run at least 2 GBs. so no worries. 1800 will come,just later.The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will you be running 2 gbs or did you scrap the 1800? Remember you saying it looked like youd be going with that and was interested in possibly going in for my first 1800 layout/any mech keyboard with a num pad ever. Just wondering :)
Will run at least 2 GBs. so no worries. 1800 will come,just later.The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will you be running 2 gbs or did you scrap the 1800? Remember you saying it looked like youd be going with that and was interested in possibly going in for my first 1800 layout/any mech keyboard with a num pad ever. Just wondering :)
no worries.we plan to lunch it next monthWill run at least 2 GBs. so no worries. 1800 will come,just later.The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will you be running 2 gbs or did you scrap the 1800? Remember you saying it looked like youd be going with that and was interested in possibly going in for my first 1800 layout/any mech keyboard with a num pad ever. Just wondering :)
please no hurry on the 1800 gb...still need to fill in my wallet :)
The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
The 60% case is live btw https://www.massdrop.com/buy/revo-design-one-aluminum-6063-60-mechanical-keyboard-case
The 60% case is live btw https://www.massdrop.com/buy/revo-design-one-aluminum-6063-60-mechanical-keyboard-case
It's more like pottery...i think....just try it out. The color is really niceThe 60% case is live btw https://www.massdrop.com/buy/revo-design-one-aluminum-6063-60-mechanical-keyboard-case
I saw that. I'm tempted to pick up a white one. So this is an enamel finish similar to a enamel coated cookware, you think?
Can you tell us what angle that case is? It looks larger than 8 degrees.Around 9 degees. :D :D :D
I'm super excited about these.
It's awesome to see something different to the usual anodizing.
I'm a little concerned about chipping the finish, but we'll see how it goes.
I picked up a pink to pair with Grand Budapest (which I think is going to look amazing).
I also picked up the blue which I think I'm going pair with Dasher.
I jumped on the milk white case. It should pair well with GMK Honeywell.
Will run at least 2 GBs. so no worries. 1800 will come,just later.The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will you be running 2 gbs or did you scrap the 1800? Remember you saying it looked like youd be going with that and was interested in possibly going in for my first 1800 layout/any mech keyboard with a num pad ever. Just wondering :)
I jumped on the milk white case. It should pair well with GMK Honeywell.
wow... that might look amazing. Good idea
Will run at least 2 GBs. so no worries. 1800 will come,just later.The white One-body 60 case looks amazing in the album on the first page! Really hope there will be a groupbuy for that one :)Will have a GB on massdrop soon!stay tuned! ;D
Will you be running 2 gbs or did you scrap the 1800? Remember you saying it looked like youd be going with that and was interested in possibly going in for my first 1800 layout/any mech keyboard with a num pad ever. Just wondering :)
Will you guys be doing the TKL? Debating on the 60% case thats on massdrop at the moment, but would definetly be in for the TKL group buy.
in the future
in the future
:'( :'( :'(
Great choice!
I never SA on them but it will looks sick.
Got a sample from Raymond today! What a beast. The new glossy finish is smooth and vibrant. Typing also sounds substantial as you would expect from a thick high profile case. Now looking for a palm rest for the first time...
I was wondering if you guys allow for split backspace on your builds and if not would you consider for the future. I saw the revo D didn't have the ability.the pub support it and I really appreciate your suggestions. I will do it next time.
We're due for a TKL GB!
We're due for a TKL GB!
I've passed up a bunch of groupbuys since last oct when I really started getting into this community, the revo D was a big regret.
We're due for a TKL GB!
I've passed up a bunch of groupbuys since last oct when I really started getting into this community, the revo D was a big regret.
Same here. It never seems like you missed much UNTIL the photos start flooding in. Then it's like FFFFFFFFF....
I was very accustomed to the plastic KUL ES-87 ergoclear feel, but now I've got a taste for the KBD75 + lubed linears. The all metal body feels much more premium :)
I can't decide on my next switch though. Very hard.
We're due for a TKL GB!
I've passed up a bunch of groupbuys since last oct when I really started getting into this community, the revo D was a big regret.
The 60% case is live btw https://www.massdrop.com/buy/revo-design-one-aluminum-6063-60-mechanical-keyboard-case
(Attachment Link)its so cute oh my lord
how about this?
(Attachment Link)
how about this?
Hey Revo. Would you consider using the 1800 style case but in TKL format? I think that would be my ideal TKL :)
Nice fat, beveled border with the standard TKL row spacing :D
Forgive me for my photographyShow Image(http://a2.qpic.cn/psb?/b0d4553a-03bb-4d4c-83fe-09cc47536ca1/Sj.NII.tX4DcNVcVwZXEyEQrCO*vy7QMoEk2Srr1ttY!/b/dDwBAAAAAAAA&bo=sARABrAEQAYRADc!&rf=viewer_4)Show Image(http://a3.qpic.cn/psb?/b0d4553a-03bb-4d4c-83fe-09cc47536ca1/MRevG5qElVS*us66itf7zuFrbtbKk0RcOcstw9OT50c!/b/dG0BAAAAAAAA&bo=sARABrAEQAYRADc!&rf=viewer_4)
Forgive me for my photographyShow Image(https://s1.ax1x.com/2017/09/15/nOld0.jpg)Show Image(https://s1.ax1x.com/2017/09/15/nO1oV.jpg)
Forgive me for my photographyShow Image(https://s1.ax1x.com/2017/09/15/nOld0.jpg)Show Image(https://s1.ax1x.com/2017/09/15/nO1oV.jpg)
Oh, my.
the one body 60% :thumb:
really need it
the one body 60% :thumb:
really need it
No worries...You just miss the first drop about it on Massdrop. You can expected a Round 2.
no still working on something. Plus i am shipping rj these days so……i will have new sample made after i finish my last gb
Is the leaked images the final design? Like the logo and its color etc?
Quoteno still working on something. Plus i am shipping rj these days so……i will have new sample made after i finish my last gb
Is the leaked images the final design? Like the logo and its color etc?
从我的 iPhone 发送,使用 Tapatalk
Quoteno still working on something. Plus i am shipping rj these days so……i will have new sample made after i finish my last gb
Is the leaked images the final design? Like the logo and its color etc?
从我的 iPhone 发送,使用 Tapatalk
really really waiting for round 2
Looking forward to it :thumb:
QuoteLooking forward to it :thumb:
Thanks,my friend. Will have some news soon!
probably not. I want this to be all funny colors. Any color haven't been done is perfect to me.
will r2 has black r1 didnt have black so i didnt miss it too much
Saturated sunny or lemon yellow perhaps? I hardly see any yellow cases and this would be the only thing to pull Nautilus out of my originally intended wood case.Quoteprobably not. I want this to be all funny colors. Any color haven't been done is perfect to me.
will r2 has black r1 didnt have black so i didnt miss it too much
Saturated sunny or lemon yellow perhaps? I hardly see any yellow cases and this would be the only thing to pull Nautilus out of my originally intended wood case.
QuoteSaturated sunny or lemon yellow perhaps? I hardly see any yellow cases and this would be the only thing to pull Nautilus out of my originally intended wood case.
I am thinking neon yellow now, but yeah,maybe lemon yellow...why not? I am getting tired of normal colors.
QuoteSaturated sunny or lemon yellow perhaps? I hardly see any yellow cases and this would be the only thing to pull Nautilus out of my originally intended wood case.
I am thinking neon yellow now, but yeah,maybe lemon yellow...why not? I am getting tired of normal colors.
Yellow would be really cool and I would love to see it be done.
I think a nice light green would also be pretty nice. Something that would go with SA lime or GMK royal alpha.
QuoteSaturated sunny or lemon yellow perhaps? I hardly see any yellow cases and this would be the only thing to pull Nautilus out of my originally intended wood case.
I am thinking neon yellow now, but yeah,maybe lemon yellow...why not? I am getting tired of normal colors.
Yellow would be really cool and I would love to see it be done.
I think a nice light green would also be pretty nice. Something that would go with SA lime or GMK royal alpha.
AGREE! Some kind of light green would be awesome, no matter is more lean to cyany or honey/bright-yellowish spectum.
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Some suggestions i got for samoyed.
1,To add an acrylic layer for the underglow. This is something i will do for sure, i'll try to find a way to make it work like RJ. You can have it or not. All depend on how you like it.
2,To do a inlaid REVO logo,like Dr.D This a good idea how do you guys feel about it?
3,Make a better weight. Yes, i am aware that the weight design is very normal.I'll think of something...
4,Make a impact 1800. This maybe another project. Right now i am gonna stuck with Samoyed.
5,White microarc finish on samoyed. Well i can't do a really white micro finish on anything. It's more like a beige to me... So if you guys want a pure white i suggest we do it pottery coating.
Well that's for now. If you still have any suggestion or something you don't like you can post here or pm me or write in the form...I am always open to new ideas.
Any update on Revo One 60% case so far? Today's the estimated shipping date
Samoye FTW!!!!
This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Quote
What is the downside of switch top removable? I can think of wobbling.
Ours will make the switch askew and it won't open easily and it's too hard to put it back inside. Or maybe we couldn't make it right so right now all our design don't support switch top removable. ;D ;D ; Btw, alu plate is soft it could be bend a little if pushed too hard.Not ideal for switch top remove,maybe ss can be better.
Wow, I haven't seen this. I agree, it's awesome.This is project number 8. I am still thinking how to sell it.......
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
THIS!!! this needs to be main stream. not just 10 pcs.. I prefer this over the other 1800 for sure..Quote
What is the downside of switch top removable? I can think of wobbling.
Ours will make the switch askew and it won't open easily and it's too hard to put it back inside. Or maybe we couldn't make it right so right now all our design don't support switch top removable. ;D ;D ; Btw, alu plate is soft it could be bend a little if pushed too hard.Not ideal for switch top remove,maybe ss can be better.
Carbon fiber plate loves the switch removal . I have one on my zz96 and it is tits. sturdy switches and no issues coming in or out..
That looks really nice. I wish they had made the gap smaller though.
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
That looks really nice. I wish they had made the gap smaller though.
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
It does have a gap in the front relative to the back. When the pcb sets into place with the case/usb port it forces you to have the off alignment with the front and back gaps. I would say that it doesn't look as bad compared to the cheap Aliexpress 60% case because the side gaps are even and reasonably tight (the cheap Alexpress case has uneven mounting and uneven gaps). The difference between the front and back gaps are only noticeable when you look directly down at it from overhead and because it's a higher end case it doesn't seem like a big deal. My IBM model F XT has a huge gap on the left side of the case and I honestly never bothered to try and fix it because the build quality as a whole is so nice that it doesn't seem to detract.
That looks really nice. I wish they had made the gap smaller though.
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
It does have a gap in the front relative to the back. When the pcb sets into place with the case/usb port it forces you to have the off alignment with the front and back gaps. I would say that it doesn't look as bad compared to the cheap Aliexpress 60% case because the side gaps are even and reasonably tight (the cheap Alexpress case has uneven mounting and uneven gaps). The difference between the front and back gaps are only noticeable when you look directly down at it from overhead and because it's a higher end case it doesn't seem like a big deal. My IBM model F XT has a huge gap on the left side of the case and I honestly never bothered to try and fix it because the build quality as a whole is so nice that it doesn't seem to detract.
That looks really nice. I wish they had made the gap smaller though.
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
It does have a gap in the front relative to the back. When the pcb sets into place with the case/usb port it forces you to have the off alignment with the front and back gaps. I would say that it doesn't look as bad compared to the cheap Aliexpress 60% case because the side gaps are even and reasonably tight (the cheap Alexpress case has uneven mounting and uneven gaps). The difference between the front and back gaps are only noticeable when you look directly down at it from overhead and because it's a higher end case it doesn't seem like a big deal. My IBM model F XT has a huge gap on the left side of the case and I honestly never bothered to try and fix it because the build quality as a whole is so nice that it doesn't seem to detract.
My sample case and my Sentraq PCB have the problem of matching the screw positions. So it used to have some uneven gaps. Now I'm just letting some screws out so it fits evenly. Hope this is just an isolated case.
(Attachment Link)
That looks really nice. I wish they had made the gap smaller though.
Can you notice the lack of support in the middle? Or does the plate cover that up pretty well?
It does have a gap in the front relative to the back. When the pcb sets into place with the case/usb port it forces you to have the off alignment with the front and back gaps. I would say that it doesn't look as bad compared to the cheap Aliexpress 60% case because the side gaps are even and reasonably tight (the cheap Alexpress case has uneven mounting and uneven gaps). The difference between the front and back gaps are only noticeable when you look directly down at it from overhead and because it's a higher end case it doesn't seem like a big deal. My IBM model F XT has a huge gap on the left side of the case and I honestly never bothered to try and fix it because the build quality as a whole is so nice that it doesn't seem to detract.
My sample case and my Sentraq PCB have the problem of matching the screw positions. So it used to have some uneven gaps. Now I'm just leaving some screws out so it fits evenly. Hope this is just an isolated case.
(Attachment Link)
Hi Raymond. Since you aren't replying to PM's. Any idea what is going on with the remaining Revo HHKB orders?