Author Topic: [GB] Ice Box Artisan Case - Round 2 | SHIPPED (Read 23894 times)

RobotCandyCompany · « **on:** Mon, 16 December 2019, 14:49:54 »

SHIPPING COMPLETE

Ice Box Round 2 is here!

When: Until January 18, 2020

Where: https://robotcandy.company/products/ice-box-artisan-case

Complete Kits are $99.99 plus shipping

Ice Box Topre and MX caps

Ice Box is a 70 slot (10x7) Artisan keycap display, storage and transportation box

Features:

70 cells for MX and Topre keycaps
Machined from frosted polycarbonate
Friction fit acrylic lid
Rubber 3M Bumpon feet for traction & stability
Foam insert to prevent cap movement during travel
Two elastic straps for extra security and comfort when traveling (black or blue options)
Designed to securely store Topre caps by accounting for their longer stems
Optional aluminum legs to angle the case for display (20° or 15°)

Ice Box with bands and tilting legs

Specs

Cell size: 0.78" x 0.78" x 0.91"
Cell spacing: 0.079"
Outer dimensions: 1.23" x 9.29" x 6.71"

Taeha Types stream unboxing: https://youtu.be/r5EzOvV1_QE?t=1716

Fulfillment Timeline
Pre-orders will close on January 18, 2020 and production will begin immediately
Shipping will be complete no later than March 20, 2020

No artificial limit will be placed on units produced

RobotCandyCompany · « **Reply #1 on:** Mon, 16 December 2019, 14:50:04 »

reserved

crasong · « **Reply #2 on:** Mon, 16 December 2019, 15:20:39 »

Saw TaehaTypes' review of your box and the legs, lid, foam insert, and straps are exactly what I've wanted!

P.S. I bought a few of your keyboard display stands at the SoCal meetup and I have to say the quality is great. Good stuff!

LightningXI · « **Reply #3 on:** Mon, 16 December 2019, 15:40:13 »

From how the last one turned out, this is a very tempting re-grab.

RobotCandyCompany · « **Reply #4 on:** Wed, 18 December 2019, 14:13:23 »

Taking orders!

Thanks for the support so far!

kokugatsu · « **Reply #5 on:** Fri, 20 December 2019, 10:48:43 »

Would prefer if there were options for smokey or ice.

I'm in regardless.

delet_d · « **Reply #6 on:** Fri, 20 December 2019, 20:24:10 »

could you name the artisans in the first pic please? box looks fantastic!

RobotCandyCompany · « **Reply #7 on:** Sat, 21 December 2019, 11:31:59 »

Quote from: delet_d on Fri, 20 December 2019, 20:24:10

could you name the artisans in the first pic please? box looks fantastic!

All the artisans in the top photo are handmade by me. Mostly blanks with a Final Boss in the top row, Rux in the middle row, and a Crusader in the bottom row.

kronograf · « **Reply #8 on:** Mon, 23 December 2019, 06:18:35 »

I would totally get another if you fix the issue with the overly tight lid tolerances. Mine has already developed a fair share of wear on the lid and case edges from it needing to be brute forced in every single time. Great box otherwise.

Rob27shred · « **Reply #9 on:** Mon, 23 December 2019, 06:58:08 »

Hmm, while I'm not the hugest artisan collector out there I could use a true storage solution for my resins. Very tempting considering almost all comments about the first round are positive.

fuzzybaffy · « **Reply #10 on:** Tue, 24 December 2019, 06:37:02 »

Dropping a good word on this case. Was very surprised with the quality of the plastic, but disclaimer I haven't really compared it to other cases. And I do agree the lid could be improved. I would still buy it again if I needed to (I only have like 10 artisans, lol).

Possumx · « **Reply #11 on:** Mon, 30 December 2019, 16:16:08 »

Since I need more space I just ordered a second one.

RobotCandyCompany · « **Reply #12 on:** Sat, 04 January 2020, 01:13:02 »

Thanks for the support so far! 2 weeks left on R2 preorders!

ranonranonarat · « **Reply #13 on:** Mon, 06 January 2020, 18:06:04 »

Interested on this but I've seen a few comments on lid tolerance issues. Will this be fixed down the line?

RobotCandyCompany · « **Reply #14 on:** Mon, 13 January 2020, 14:10:15 »

Quote from: ranonranonarat on Mon, 06 January 2020, 18:06:04

Interested on this but I've seen a few comments on lid tolerance issues. Will this be fixed down the line?

The lids were designed to fit tightly. A small number of people in the round 1 group buy expressed concern (no one at any meetup going back to May of 2019 who got to handle the case gave this feedback), so I've been tinkering with the lid cuts since depending on which side is down, the lid can be slightly tighter.

In round 1, I had all the lids before the cases arrived. Moving forward, I will be carefully test-fitting lids in smaller batches during QC so that no one feels like they're too tight.

RobotCandyCompany · « **Reply #15 on:** Mon, 10 February 2020, 10:53:26 »

Due to the coronavirus outbreak, the production of Ice Box will be delayed 1-2 weeks. Because of this, I'm going to push the "shipping" date back to the first week of April.

As things develop, I will provide updates.

Sorry about the delay and stay safe out there!

Magas · « **Reply #16 on:** Mon, 10 February 2020, 19:53:56 »

Already sold out!? lol dang... missed that

nightgyr · « **Reply #17 on:** Mon, 17 February 2020, 00:27:43 »

totally missed the GB. very disappointed. There is a chance to get in late?

RobotCandyCompany · « **Reply #18 on:** Tue, 14 April 2020, 15:14:27 »

All orders are shipped! Thanks for sticking with me in these hard times. I'll have an extras announcement out tomorrow morning on https://www.instagram.com/robotcandycompany/ and http://reddit.com/r/mechmarket

Thanks again and I hope everyone who snagged one (or more) enjoys their Ice Box!

PLEASE feel free to share photos of your collections as I love to see how the stuff I'm making is being used!

wilarseny · « **Reply #19 on:** Wed, 22 April 2020, 16:04:00 »

Hey mate, would love a head's up on GH when the next wave of extras come out. Was watching for the r/mm post after the last update here but must've missed it.

News:

Author Topic: [GB] Ice Box Artisan Case - Round 2 | SHIPPED (Read 23894 times)