[IC] The DO60 PCB - update 2018 Jan 23

[jmdaly]

Hi,
Thank you, we've solve the issue by add resistors.
And it works with nex Mac pro type-c now.

Great! I'm really glad to hear that. Thank you for doing the work to ensure it's compatible in a USB-C to USB-C configuration. I think that really adds a lot of value to your PCB. Really looking forward to getting my DO60s

[merlin64]

I'm checking this these days.
If cc pins have to connect to GND with pull down resistors.
We'll modify it this time.

Thanks for looking into this! I'm looking forward to hearing about your findings.

This is good work here. Thank you sennin.

Just to add some info, the following application note might be helpful. I know it deals with a different microcontroller, but it describes in general what is required for a legacy USB device in terms of the resistors on the CC lines when using a USB Type-C connector. In particular, there's a schematic on pg. 16 that might help.

http://www.st.com/resource/en/application_note/dm00235987.pdf

Hi,
Thank you, we've solve the issue by add resistors.
And it works with nex Mac pro type-c now.

[Tobai]

Is 1.5--1--1.5--3--3--1.5--1--1--1.5 supported?
The link with all supported layouts says it is, but looking at the photo of the PCB, I can't spot the corresponding switch / stabilizer holes.

[sennin32]

Is 1.5--1--1.5--3--3--1.5--1--1--1.5 supported?
The link with all supported layouts says it is, but looking at the photo of the PCB, I can't spot the corresponding switch / stabilizer holes.

cause it will happen after v0.2.8.
Does not offer in 0.2.7

[gok_nz]

Did you measure it?

If it is too long, the stabiliser will rattle because there would be too much free space so it wouldnt be able to accommodate thick and thin pcb at the same time. I can imagine screw in stabs working though.

[bepbeplettuc]

I bought one about 2 weeks ago and am super excited for it!

When will the PCB ship, though?

[bluesclera]

I think its been more than 2weeks.

[Liam]

This is from Discord: "We found manufacturer modify our file manually, and that makes 2 component inverse. That causes light problem, we’ve ask them to process exactly as our pos file"

[bluesclera]

Thanks for the update.

[sennin32]

Damn,
They ask for extra charge for new sample even the issue is because of them 

[_ODIN_]

will you make a rerun?

[thread]

Yes, please. I need me some, too. Especially if that USB C to USB C works!

[sennin32]

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

[duynguyenle]

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

Can confirm I have received mine about a week ago.

[dr-slump]

I didn't receive mine yet (2 PCBs & 2 universal shifted ZXCVB ISO plates in grey) nor did I get a shipping notification

Order # 000002148

[sennin32]

Hi,
The Group has ended several months ago.
We got some extra PCBs.
If you missed this groupbuy but still want to get one.
Check it here : https://shopkey.doyustudio.com/001pcb60