Author Topic: [Order] TX60/TX65/TX84se  (Read 39274 times)

Joeyo, mrdar206, Artemisia254 and 2 Guests are viewing this topic.

Offline kin25

  • Thread Starter
  • Posts: 456
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #400 on: Fri, 13 April 2018, 22:46:07 »
I've checked it's not there - I only see the stabs, films and LEDs which I ordered.

sorry, I will send them on Monday.

Offline pr0ximity

  • Posts: 2181
  • Location: Vacationland
Re: [Order] TX60/TX65/TX84se
« Reply #401 on: Sat, 14 April 2018, 20:42:02 »
TX kits always look so fresh and clean, not sure what it is about them.

Nice work, kin

Offline edsucks

  • Posts: 52
  • Location: Norway
Re: [Order] TX60/TX65/TX84se
« Reply #402 on: Sun, 15 April 2018, 03:11:26 »
TX kits always look so fresh and clean, not sure what it is about them.

Nice work, kin

The amazing attention to detail and quality  :)

Offline poolside

  • Posts: 692
  • Location: On the deck
Re: [Order] TX60/TX65/TX84se
« Reply #403 on: Sun, 15 April 2018, 12:39:35 »
Does anybody have the dimensions and weight of a TX60/65 bag?

Edit: grammar
« Last Edit: Sun, 15 April 2018, 14:22:18 by poolside »

Offline wholypantalones

  • Posts: 268
  • Location: 616
Re: [Order] TX60/TX65/TX84se
« Reply #404 on: Sun, 15 April 2018, 14:09:53 »
Built with love and ergo clears.



https://imgur.com/a/LuuKr

Offline Workglove27

  • Posts: 2
Re: [Order] TX60/TX65/TX84se
« Reply #405 on: Sun, 15 April 2018, 14:48:07 »
Does anyone know what diodes Kin uses for the boards. My pcb has a diode cracked for the left ctrl and it does not work. I put a picture of it below to see if there is anything I can do with it without replacing it. I couldn't find any spares in the kit.

https://imgur.com/a/IbzZ6


Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1157
  • Location: Indiana, USA
Re: [Order] TX60/TX65/TX84se
« Reply #406 on: Sun, 15 April 2018, 16:07:10 »
My silver TX60 arrived yesterday.  Flawless condition, looks great.  Thanks Kin. 
keyboards.

Offline pr0ximity

  • Posts: 2181
  • Location: Vacationland
Re: [Order] TX60/TX65/TX84se
« Reply #407 on: Sun, 15 April 2018, 16:11:04 »
Built with love and ergo clears.

Show Image


https://imgur.com/a/LuuKr

Dang that's a good looking board. Though I have to say I'd recommend OG dyesubs instead :P

Offline Captainbuttmonkey

  • Posts: 246
  • Location: UK
Re: [Order] TX60/TX65/TX84se
« Reply #408 on: Sun, 15 April 2018, 17:00:50 »
Built with love and ergo clears.

Show Image


https://imgur.com/a/LuuKr

That album is absolutely stunning

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #409 on: Sun, 15 April 2018, 18:18:47 »
in for one. looks great

Waiting on invoice still. Has me nervous. is this still open or is the stock gone?
« Last Edit: Mon, 16 April 2018, 05:04:22 by Snappo »

Online LightningXI

  • Posts: 862
  • Location: New York
  • PPD
Re: [Order] TX60/TX65/TX84se
« Reply #410 on: Sun, 15 April 2018, 20:11:59 »
Built with love and ergo clears.

Show Image


https://imgur.com/a/LuuKr

Gorgeous. I love it! I too concur with pr0ximity on OG dyesubs :) Or you can always get in the new BSP run that will be up tomorrow on Massdrop.

Offline regionfree

  • Posts: 106
Re: [Order] TX60/TX65/TX84se
« Reply #411 on: Sun, 15 April 2018, 20:24:51 »
for the TX84SE, is the diffuser a required piece in the assembly? or is it something you can choose not to install?
i like keyboards

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #412 on: Mon, 16 April 2018, 08:28:55 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Offline nug

  • Posts: 18
Re: [Order] TX60/TX65/TX84se
« Reply #413 on: Mon, 16 April 2018, 08:39:19 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Tx84se were sold out.

Maybe some TX60/65 still available?

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #414 on: Mon, 16 April 2018, 08:40:41 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Tx84se were sold out.

Maybe some TX60/65 still available?


I hope so

Offline base

  • Posts: 23
  • Location: Columbia, South Carolina
Re: [Order] TX60/TX65/TX84se
« Reply #415 on: Mon, 16 April 2018, 08:42:59 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Tx84se were sold out.

Maybe some TX60/65 still available?


I hope so



There was a problem of google drive.
I can't see updated google form file.
after 25 Match, orders can't be shown.


PLZ send email to me, if you want to buy extras.


225ozzy@naver.com


I believe there are still at least some extras; I ordered a silver tx60 on April 12 and was invoiced within a day or so. See Kin's note above.

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #416 on: Mon, 16 April 2018, 08:49:30 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Tx84se were sold out.

Maybe some TX60/65 still available?


I hope so



There was a problem of google drive.
I can't see updated google form file.
after 25 Match, orders can't be shown.


PLZ send email to me, if you want to buy extras.


225ozzy@naver.com


I believe there are still at least some extras; I ordered a silver tx60 on April 12 and was invoiced within a day or so. See Kin's note above.


Thanks I'll try that.

Offline Sifo

  • Swaglord Yolomancer
  • * Exquisite Elder
  • Posts: 6362
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • beekeeper
Re: [Order] TX60/TX65/TX84se
« Reply #417 on: Mon, 16 April 2018, 16:01:10 »


thank you kin!!!~

using it as a storage unit for this kmac until i can be bothered to sell it. perfect fit

« Last Edit: Mon, 16 April 2018, 16:36:09 by Sifo »
(Forever) Illustrious.

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #418 on: Mon, 16 April 2018, 17:05:36 »
Is this still open for order? I've heard its closed and the invoices have been sent but I'm not sure.

Tx84se were sold out.




Maybe some TX60/65 still available?


I hope so



There was a problem of google drive.
I can't see updated google form file.
after 25 Match, orders can't be shown.


PLZ send email to me, if you want to buy extras.


225ozzy@naver.com


I believe there are still at least some extras; I ordered a silver tx60 on April 12 and was invoiced within a day or so. See Kin's note above.


Thanks I'll try that.


Email sent. Lets hope and pray boys  :(

Offline kin25

  • Thread Starter
  • Posts: 456
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #419 on: Mon, 16 April 2018, 18:50:30 »
I was busy yesterday.
So I could not check email yet.
I will check them and send invoices today.

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #420 on: Mon, 16 April 2018, 19:45:39 »
I was busy yesterday.
So I could not check email yet.
I will check them and send invoices today.


 :eek: there is hope!

Offline cucgach

  • Posts: 25
  • Location: Vietnam
Re: [Order] TX60/TX65/TX84se
« Reply #421 on: Tue, 17 April 2018, 07:15:50 »
Does anyone know what diodes Kin uses for the boards. My pcb has a diode cracked for the left ctrl and it does not work. I put a picture of it below to see if there is anything I can do with it without replacing it. I couldn't find any spares in the kit.

https://imgur.com/a/IbzZ6

Kin, you might want to look at this as well :)

Or maybe it's best to email him directly, Workglove27 :)

Offline cucgach

  • Posts: 25
  • Location: Vietnam
Re: [Order] TX60/TX65/TX84se
« Reply #422 on: Tue, 17 April 2018, 07:17:40 »
Built with love and ergo clears.

Show Image


https://imgur.com/a/LuuKr

Wow, high five bro! This is exactly the same I'm going to do with my gray TX84SE: egro clear, 9009 keycap except that still waiting for the switches to arrive.

Online mdlt97

  • Posts: 33
  • Location: Toronto
  • This **** is still better than Keebtalk
Re: [Order] TX60/TX65/TX84se
« Reply #423 on: Tue, 17 April 2018, 10:04:07 »
https://i.imgur.com/RtiCeye.jpg



omg im in love
the blue in photos isnt anything close to in person
its so vibrant in person holy crap this is amazing
well dont kin well done
Duck TC-V3, Duck Eagle Prototype bottom, Zephyr

Offline pixelpusher

  • Formerly known as reececonrad
  • Posts: 1929
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #424 on: Tue, 17 April 2018, 16:17:28 »
https://i.imgur.com/RtiCeye.jpg



omg im in love
the blue in photos isnt anything close to in person
its so vibrant in person holy crap this is amazing
well dont kin well done

I know what you mean by the blue being even better in person.  Honestly, the only thing I can think of that is that same blue is women's blue satin panties.  I think that's probably appropriate...
What keycaps do you plan to use on the blue?
:)

Online mdlt97

  • Posts: 33
  • Location: Toronto
  • This **** is still better than Keebtalk
Re: [Order] TX60/TX65/TX84se
« Reply #425 on: Tue, 17 April 2018, 17:32:31 »
https://i.imgur.com/RtiCeye.jpg



omg im in love
the blue in photos isnt anything close to in person
its so vibrant in person holy crap this is amazing
well dont kin well done

I know what you mean by the blue being even better in person.  Honestly, the only thing I can think of that is that same blue is women's blue satin panties.  I think that's probably appropriate...
What keycaps do you plan to use on the blue?




yoooo thats so true

and gmk Olivetti
Duck TC-V3, Duck Eagle Prototype bottom, Zephyr

Offline nug

  • Posts: 18
Re: [Order] TX60/TX65/TX84se
« Reply #426 on: Tue, 17 April 2018, 17:33:55 »
Are there any guides anywhere on how to flash QMK to the boards?

I have a TX65 and I'd like to put QMK on it but I haven't had much luck finding information specific to Leeku PCBs and QMK.

Offline donut_sauce

  • Posts: 244
Re: [Order] TX60/TX65/TX84se
« Reply #427 on: Tue, 17 April 2018, 17:42:17 »
Are there any guides anywhere on how to flash QMK to the boards?

I have a TX65 and I'd like to put QMK on it but I haven't had much luck finding information specific to Leeku PCBs and QMK.
Pretty sure Leeku are not compatible with Qmk

Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8838
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [Order] TX60/TX65/TX84se
« Reply #428 on: Tue, 17 April 2018, 18:35:15 »
Are there any guides anywhere on how to flash QMK to the boards?

I have a TX65 and I'd like to put QMK on it but I haven't had much luck finding information specific to Leeku PCBs and QMK.
Pretty sure Leeku are not compatible with Qmk

correct, the controller on leeku boards won't work with QMK

Does anyone know what diodes Kin uses for the boards. My pcb has a diode cracked for the left ctrl and it does not work. I put a picture of it below to see if there is anything I can do with it without replacing it. I couldn't find any spares in the kit.

https://imgur.com/a/IbzZ6

Kin, you might want to look at this as well :)

Or maybe it's best to email him directly, Workglove27 :)

i think it's ll4148 for SMD diodes
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline Workglove27

  • Posts: 2
Re: [Order] TX60/TX65/TX84se
« Reply #429 on: Tue, 17 April 2018, 20:41:12 »
Does anyone know what diodes Kin uses for the boards. My pcb has a diode cracked for the left ctrl and it does not work. I put a picture of it below to see if there is anything I can do with it without replacing it. I couldn't find any spares in the kit.

https://imgur.com/a/IbzZ6

Kin, you might want to look at this as well :)

Or maybe it's best to email him directly, Workglove27 :)

Yeah I did, he told me to take a diode from the iso enter and use that to replace it (feels really bad to not think of that myself).

Offline nug

  • Posts: 18
Re: [Order] TX60/TX65/TX84se
« Reply #430 on: Tue, 17 April 2018, 23:49:34 »
Pretty sure Leeku are not compatible with Qmk
correct, the controller on leeku boards won't work with QMK
Thanks for the replies guys. There is a TMK port for some Leeku PCBs so perhaps working from that the TX65 PCB could be ported?

There are some boards with the same controller (Atmega32A) such as the JC65, Bface? but that might not be relevant...
« Last Edit: Tue, 17 April 2018, 23:51:30 by nug »

Offline merlin64

  • Posts: 1090
  • Location: Seattle, WA
    • MechMerlin
Re: [Order] TX60/TX65/TX84se
« Reply #431 on: Wed, 18 April 2018, 00:04:20 »
Pretty sure Leeku are not compatible with Qmk
correct, the controller on leeku boards won't work with QMK
Thanks for the replies guys. There is a TMK port for some Leeku PCBs so perhaps working from that the TX65 PCB could be ported?

There are some boards with the same controller (Atmega32A) such as the JC65, Bface? but that might not be relevant...

I would highly advise against using QMK on the Leeku boards. PCBs are cheap, TX60 uses standard 60%.
The requirement to use QMK on these boards is to completely replace the bootloader using a tool called an AVR programmer. There's no going back. It is a fairly difficult task that can be avoided by just buying another PCB.
For the non 60s, it's probably worth a shot but hope you have a spare PCB just in case.
Subscribe to MechMerlin: https://goo.gl/idUy33
Latest Video: https://goo.gl/SkbyTx

GMK Cerulean Sage IC: https://geekhack.org/index.php?topic=95019.0

Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #432 on: Wed, 18 April 2018, 02:38:45 »
Anyone here have any idea why my JigOn connection kept failing?

I updated the layout few days ago and now I can't even connect.

Offline trikoi00

  • Posts: 59
  • Location: Singapore
  • GMK bias
Re: [Order] TX60/TX65/TX84se
« Reply #433 on: Wed, 18 April 2018, 05:21:22 »
Did you update to latest pcb firmware ?

Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #434 on: Wed, 18 April 2018, 05:33:55 »
Did you update to latest pcb firmware ?

Didn't do any update. I was able to program it previously so not sure why suddenly doesn't connect anymore  :-X

Offline trikoi00

  • Posts: 59
  • Location: Singapore
  • GMK bias
Re: [Order] TX60/TX65/TX84se
« Reply #435 on: Wed, 18 April 2018, 05:36:49 »
I have the same issue, tried update jt. Reset to factory default solve it but not for long.  Once I bricked it by playing around with rgb settings. It just totally refuse to connect, light were on only. Then I hold ~ when plug in to reset to factory. It work fine now.

Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #436 on: Wed, 18 April 2018, 05:37:34 »
I have the same issue, tried update jt. Reset to factory default solve it but not for long.  Once I bricked it by playing around with rgb settings. It just totally refuse to connect, light were on only. Then I hold ~ when plug in to reset to factory. It work fine now.

I will try it again. Thanks.

Offline pixelpusher

  • Formerly known as reececonrad
  • Posts: 1929
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #437 on: Wed, 18 April 2018, 09:53:07 »
Couple of tips for dummies like myself.  Yes, you snap off that top and bottom part of the PCB.
Always test every single key before you build!  I had 3 diodes on my TX-65 that were not properly set.  Two of them responded to some flux and a hot iron.  The other one had to come off completely.  And yes, diodes are polarized.  And yes, these DO have markings, you just need a good amount of light to see them.  They are printed (debossed?) in the black.  You'll see two vertical lines and a "W1" if you look very carefully.  I removed the diode, added flux, reseated, and with a smidge of solder on the iron tip, I touched it to the diode and surface pad.

« Last Edit: Wed, 18 April 2018, 10:00:15 by pixelpusher »
:)

Offline Peppermint216

  • Posts: 177
Re: [Order] TX60/TX65/TX84se
« Reply #438 on: Wed, 18 April 2018, 12:58:54 »
Built mine today with lubed box yellows. Case is flawless.

« Last Edit: Wed, 18 April 2018, 13:48:17 by Peppermint216 »

Offline YisSerL

  • Posts: 30
Re: [Order] TX60/TX65/TX84se
« Reply #439 on: Wed, 18 April 2018, 13:17:04 »
Very clean.  How do you like the box yellow?  Is it a pain to open up box switches to lube them?

Offline Peppermint216

  • Posts: 177
Re: [Order] TX60/TX65/TX84se
« Reply #440 on: Wed, 18 April 2018, 13:44:26 »
Very clean.  How do you like the box yellow?  Is it a pain to open up box switches to lube them?

Not really, I opened them all up with just my finger nails. Pull both sides at the same time and the spring does the rest.

They're ok, really like the 85g bottom out weight. Box switches are super smooth when pressing them from the middle, if you happen to hit a switch off centre you scratch the side of the box on the top housing, particularly noticeable on the 1.25u and up keycaps obviously. Don't think I will build with them again but I like having a different switch on each board so no regrets.
« Last Edit: Wed, 18 April 2018, 13:47:54 by Peppermint216 »

Offline Peppermint216

  • Posts: 177
Re: [Order] TX60/TX65/TX84se
« Reply #441 on: Wed, 18 April 2018, 14:33:26 »
Also, fully built it weighs 2.3kg, is this the heaviest 60%?

Offline merlin64

  • Posts: 1090
  • Location: Seattle, WA
    • MechMerlin
Re: [Order] TX60/TX65/TX84se
« Reply #442 on: Wed, 18 April 2018, 15:39:49 »
Also, fully built it weighs 2.3kg, is this the heaviest 60%?

The Fjell is still heavier.
Subscribe to MechMerlin: https://goo.gl/idUy33
Latest Video: https://goo.gl/SkbyTx

GMK Cerulean Sage IC: https://geekhack.org/index.php?topic=95019.0

Offline Peppermint216

  • Posts: 177
Re: [Order] TX60/TX65/TX84se
« Reply #443 on: Wed, 18 April 2018, 15:41:49 »
Also, fully built it weighs 2.3kg, is this the heaviest 60%?

The Fjell is still heavier.
Oh is it, thought it was 2 kilo?

Offline pr0ximity

  • Posts: 2181
  • Location: Vacationland
Re: [Order] TX60/TX65/TX84se
« Reply #444 on: Wed, 18 April 2018, 16:22:27 »
I would highly advise against using QMK on the Leeku boards. PCBs are cheap, TX60 uses standard 60%.
The requirement to use QMK on these boards is to completely replace the bootloader using a tool called an AVR programmer. There's no going back. It is a fairly difficult task that can be avoided by just buying another PCB.
For the non 60s, it's probably worth a shot but hope you have a spare PCB just in case.

It's not a "no going back" procedure. You can dump the current firmware to back it up, then restore it if you run into problems. Also not hugely difficult as long as the PCB has headers and you're moderaly comfortable debugging things. Buy a USB ISP, download avrdude, then read some tutorials.

Getting QMK actually working on one of these though, is a different story. Can't speak to how difficult that is, but I think it would be fun to try.

Offline merlin64

  • Posts: 1090
  • Location: Seattle, WA
    • MechMerlin
Re: [Order] TX60/TX65/TX84se
« Reply #445 on: Wed, 18 April 2018, 16:26:23 »
I would highly advise against using QMK on the Leeku boards. PCBs are cheap, TX60 uses standard 60%.
The requirement to use QMK on these boards is to completely replace the bootloader using a tool called an AVR programmer. There's no going back. It is a fairly difficult task that can be avoided by just buying another PCB.
For the non 60s, it's probably worth a shot but hope you have a spare PCB just in case.

It's not a "no going back" procedure. You can dump the current firmware to back it up, then restore it if you run into problems. Also not hugely difficult as long as the PCB has headers and you're moderaly comfortable debugging things. Buy a USB ISP, download avrdude, then read some tutorials.

Getting QMK actually working on one of these though, is a different story. Can't speak to how difficult that is, but I think it would be fun to try.

EZ PZ lol.
Subscribe to MechMerlin: https://goo.gl/idUy33
Latest Video: https://goo.gl/SkbyTx

GMK Cerulean Sage IC: https://geekhack.org/index.php?topic=95019.0

Offline donut_sauce

  • Posts: 244
Re: [Order] TX60/TX65/TX84se
« Reply #446 on: Wed, 18 April 2018, 16:43:51 »
I would highly advise against using QMK on the Leeku boards. PCBs are cheap, TX60 uses standard 60%.
The requirement to use QMK on these boards is to completely replace the bootloader using a tool called an AVR programmer. There's no going back. It is a fairly difficult task that can be avoided by just buying another PCB.
For the non 60s, it's probably worth a shot but hope you have a spare PCB just in case.

It's not a "no going back" procedure. You can dump the current firmware to back it up, then restore it if you run into problems. Also not hugely difficult as long as the PCB has headers and you're moderaly comfortable debugging things. Buy a USB ISP, download avrdude, then read some tutorials.

Getting QMK actually working on one of these though, is a different story. Can't speak to how difficult that is, but I think it would be fun to try.

EZ PZ lol.
It's worth mentioning that the Leeku uses an Atmega32a chip which doesn't have native usb support and will require vusb.c .  The Pearl QMK branches uses this but it's still limited, certain things like QMK Macros won't ever work due to timeout issues. I ended up just handwiring my Pearl to a teensy to get QMK on it.
« Last Edit: Wed, 18 April 2018, 16:45:54 by donut_sauce »

Offline wholypantalones

  • Posts: 268
  • Location: 616
Re: [Order] TX60/TX65/TX84se
« Reply #447 on: Wed, 18 April 2018, 18:38:18 »
for the TX84SE, is the diffuser a required piece in the assembly? or is it something you can choose not to install?

You can build it with or without. I put some white paper in the bottom of mine and it diffuses the light a lot better.

Offline Snappo

  • Posts: 41
  • Location: UK
  • meme
Re: [Order] TX60/TX65/TX84se
« Reply #448 on: Thu, 19 April 2018, 02:15:51 »
I was busy yesterday.
So I could not check email yet.
I will check them and send invoices today.


Any chance of another round of email checks?

Offline kin25

  • Thread Starter
  • Posts: 456
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #449 on: Thu, 19 April 2018, 06:44:59 »
Sorry. I was busy for a few days.