Author Topic: [GB] [Round 1 done] ISO & ANSI 60% mountplates (Read 147294 times)

pix3l_fodder · « **Reply #100 on:** Sun, 17 May 2015, 15:40:07 »

The fit of the cherry switches, would that be rectified by power coating the plate or is the fit that lose? If so what glue would one recommend?

TalkingTree · « **Reply #101 on:** Sun, 17 May 2015, 15:42:31 »

Order placed.

LeandreN · « **Reply #102 on:** Sun, 17 May 2015, 15:47:08 »

Quote from: pix3l_fodder on Sun, 17 May 2015, 15:40:07

The fit of the cherry switches, would that be rectified by power coating the plate or is the fit that lose? If so what glue would one recommend?

It is not "that" lose. With most keycaps, it won't even get out of the plate, but with some, it will. I am not an expert on gluing switches, but probably hot glue as you can remove it later.

Thanks for your order!

LeandreN · « **Reply #103 on:** Sun, 17 May 2015, 15:48:08 »

Quote from: TalkingTree on Sun, 17 May 2015, 15:42:31

Order placed.

Thanks!

Tiramisuu · « **Reply #104 on:** Sun, 17 May 2015, 15:49:13 »

I'm number 2

LeandreN · « **Reply #105 on:** Sun, 17 May 2015, 15:51:33 »

Quote from: Tiramisuu on Sun, 17 May 2015, 15:49:13

I'm number 2

Number 2 to tell in this thread

a-c · « **Reply #106 on:** Sun, 17 May 2015, 16:07:20 »

Really looking forward to these.

Thanks for the hard work!

LeandreN · « **Reply #107 on:** Sun, 17 May 2015, 16:07:54 »

Quote from: a-c on Sun, 17 May 2015, 16:07:20

Really looking forward to these.

Thanks for the hard work!

Thanks, I really appericate it!

flabbergast · « **Reply #108 on:** Sun, 17 May 2015, 16:08:26 »

Thanks for running this!

LeandreN · « **Reply #109 on:** Sun, 17 May 2015, 16:08:47 »

Quote from: flabbergast on Sun, 17 May 2015, 16:08:26

Thanks for running this!

Thanks for supporting!

LeandreN · « **Reply #110 on:** Sun, 17 May 2015, 16:58:23 »

Close to tipping the MOQ for ANSI just a couple of hours after the orders opened. This is amazing! Spread the word to get an even better price!

Norman_the_Owl · « **Reply #111 on:** Sun, 17 May 2015, 18:12:32 »

Hmmm...Any idea on what shipping to the USA will be from your haven in scandinavia?

wlhlm · « **Reply #112 on:** Sun, 17 May 2015, 20:06:02 »

Quote from: Norman_the_Owl on Sun, 17 May 2015, 18:12:32

Hmmm...Any idea on what shipping to the USA will be from your haven in scandinavia?

Shipping is stated in the order form. 10$ worldwide for one plate.

LeandreN · « **Reply #113 on:** Mon, 18 May 2015, 02:48:40 »

We just reached the MOQ for both plates, after under 24 hours!

Next price change is 20 plates sold, we need 3 more for ANSI and 10 more for ISO to tip

wlhlm · « **Reply #114 on:** Mon, 18 May 2015, 02:56:24 »

Quote from: LeandreN on Mon, 18 May 2015, 02:48:40

We just reached the MOQ for both plates, after under 24 hours!

Next price change is 20 plates sold, we need 3 more for ANSI and 10 more for ISO to tip

Go go go!

LeandreN · « **Reply #115 on:** Mon, 18 May 2015, 06:34:38 »

Got orders from all over the world!

Thanks for all the support!

LeandreN · « **Reply #116 on:** Mon, 18 May 2015, 10:28:18 »

One more plate to get the ANSI to tip

.

9 more for the ISO. Totally possble!

Thanks for joining in.

Tiramisuu · « **Reply #117 on:** Mon, 18 May 2015, 11:04:47 »

Quick and Simple is an excellent recipe for delivering a group buy on geekhack.

LeandreN · « **Reply #118 on:** Mon, 18 May 2015, 11:27:43 »

Quote from: Tiramisuu on Mon, 18 May 2015, 11:04:47

Quick and Simple is an excellent recipe for delivering a group buy on geekhack.

LeandreN · « **Reply #119 on:** Mon, 18 May 2015, 12:37:00 »

ANSI has tipped and are available for an even cheaper price. Go tell your friends! Can't thank you enough. This is awesome!

Pietdagamer · « **Reply #120 on:** Mon, 18 May 2015, 14:19:29 »

Ordered 1 ANSI plate! Thank you so much for doing this group buy

LeandreN · « **Reply #121 on:** Mon, 18 May 2015, 14:20:57 »

Quote from: Pietdagamer on Mon, 18 May 2015, 14:19:29

Ordered 1 ANSI plate! Thank you so much for doing this group buy

Awesome, thanks!

LeandreN · « **Reply #122 on:** Mon, 18 May 2015, 14:56:32 »

I don't know if everybody has got in their order, but it seems like 24 hours is plenty for most people, BUT i want it to be as cheap as possible! I want it to stay atleast a bit more open and i also want some community interaction: http://strawpoll.me/4393904 thanks.

Future timeline:
Orders close > Invoicing (1 day) > Everyone pays their invoice (X day(s)) > message to China (1 day) > production 10 days > shipping to me (5 days) > preparation(packaging) for shipping (1 day) > shipping to you (hopefully1-2 weeks WW, hopefully under 1 week EU).

Norman_the_Owl · « **Reply #123 on:** Mon, 18 May 2015, 17:06:46 »

Quote from: wlhlm on Sun, 17 May 2015, 20:06:02

Quote from: Norman_the_Owl on Sun, 17 May 2015, 18:12:32
Hmmm...Any idea on what shipping to the USA will be from your haven in scandinavia?
Shipping is stated in the order form. 10$ worldwide for one plate.

I missed that, thank you.
I only looked in the post, not there

LeandreN · « **Reply #124 on:** Mon, 18 May 2015, 23:42:11 »

Ok, I was able to combine the orders! That means that it will be much easier to tip. We now both ISO and ANSI tipped to the next step. We have a total of 33 plates ordered, and we need 50 total to tip again. Please let me know if you dont understand. Please share the GB so we can get the lowest price possible

TalkingTree · « **Reply #125 on:** Tue, 19 May 2015, 05:00:21 »

Quote from: LeandreN on Mon, 18 May 2015, 23:42:11

I was able to combine the orders!

I'm seeing your face on the Time Magazine.

LeandreN · « **Reply #126 on:** Tue, 19 May 2015, 06:58:05 »

Quote from: TalkingTree on Tue, 19 May 2015, 05:00:21

Quote from: LeandreN on Mon, 18 May 2015, 23:42:11
I was able to combine the orders!
I'm seeing your face on the Time Magazine.

Tyr · « **Reply #127 on:** Tue, 19 May 2015, 09:29:09 »

Ordered 2 ISO. Now maybe finally I can do something with those Gateron switches I have lying around

LeandreN · « **Reply #128 on:** Tue, 19 May 2015, 09:32:27 »

Quote from: Tyr on Tue, 19 May 2015, 09:29:09

Ordered 2 ISO. Now maybe finally I can do something with those Gateron switches I have lying around

What if you win the Gateron Blacks in addition?

Super thanks for ordering !

theanyday · « **Reply #129 on:** Tue, 19 May 2015, 10:13:10 »

Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

LeandreN · « **Reply #130 on:** Tue, 19 May 2015, 10:15:59 »

Quote from: theanyday on Tue, 19 May 2015, 10:13:10

Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

You can order by PMing me

CPTBadAss · « **Reply #131 on:** Tue, 19 May 2015, 10:18:09 »

Quote from: theanyday on Tue, 19 May 2015, 10:13:10

Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

Same boat as you. I want a plate but need to a) figure out my order b) Can't access google docs at work.

LeandreN · « **Reply #132 on:** Tue, 19 May 2015, 10:38:09 »

Quote from: CPTBadAss on Tue, 19 May 2015, 10:18:09

Quote from: theanyday on Tue, 19 May 2015, 10:13:10
Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

Same boat as you. I want a plate but need to a) figure out my order b) Can't access google docs at home.

If you are able to decide, you can PM me your order and shipping address

LeandreN · « **Reply #133 on:** Tue, 19 May 2015, 15:05:25 »

Looks like most of you wanted 5 days or more. That is today 4 days. I plan on running it as long as i get orders.

More COMMUNITY INTERACTION!
http://strawpoll.me/4402157

ROUNDED CORNERS, OR NOT?

The plates fits in the Pok3r case anyway.

TalkingTree · « **Reply #134 on:** Tue, 19 May 2015, 16:14:23 »

Quote from: LeandreN on Tue, 19 May 2015, 15:05:25

ROUNDED CORNERS, OR NOT?

How much rounded by the way?

LeandreN · « **Reply #135 on:** Tue, 19 May 2015, 16:17:42 »

Quote from: TalkingTree on Tue, 19 May 2015, 16:14:23

Quote from: LeandreN on Tue, 19 May 2015, 15:05:25
ROUNDED CORNERS, OR NOT?
How much rounded by the way?

Not sure, just a little bit to remove the sharp edge.

primered6 · « **Reply #136 on:** Tue, 19 May 2015, 16:18:46 »

Ordered 2 plates. One ANSI, one ISO.

Awesome GB.

LeandreN · « **Reply #137 on:** Tue, 19 May 2015, 16:19:35 »

Quote from: primered6 on Tue, 19 May 2015, 16:18:46

Ordered 2 plates. One ANSI, one ISO.

Awesome GB.

Thanks!
For those who are ordering both? Is there a specific reason?

pepsi · « **Reply #138 on:** Tue, 19 May 2015, 17:45:17 »

Placed my order, voting yes to random corners

theanyday · « **Reply #139 on:** Tue, 19 May 2015, 18:19:02 »

Quote from: LeandreN on Tue, 19 May 2015, 10:15:59

Quote from: theanyday on Tue, 19 May 2015, 10:13:10
Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

You can order by PMing me

Just ordered mine.

LeandreN · « **Reply #140 on:** Wed, 20 May 2015, 00:06:49 »

Quote from: pepsi on Tue, 19 May 2015, 17:45:17

Placed my order, voting yes to random corners

Thanks!
Edit: Thanks for the honesty about the Gateron lottery.

LeandreN · « **Reply #141 on:** Wed, 20 May 2015, 00:07:03 »

Quote from: theanyday on Tue, 19 May 2015, 18:19:02

Quote from: LeandreN on Tue, 19 May 2015, 10:15:59
Quote from: theanyday on Tue, 19 May 2015, 10:13:10
Going to hopefully remember to order an ANSI plate once I get home, unfortunately I'm unable to access google docs at work.

You can order by PMing me

Just ordered mine.

Thanks!

Giorgio · « **Reply #142 on:** Wed, 20 May 2015, 03:20:41 »

Is it possible to fix this problem by modifying the size? Did you measure the holes?

Fit [ ✔ by me, Cherry and Gaterons switches are a little lose, you may want to glue if you have thight keycaps and you want to remove them often. Kailh fits thightly. ALPS switches fits, but not thightly. MORE]

LeandreN · « **Reply #143 on:** Wed, 20 May 2015, 03:24:27 »

Quote from: Giorgio on Wed, 20 May 2015, 03:20:41

Is it possible to fix this problem by modifying the size? Did you measure the holes?

Fit [ ✔ by me, Cherry and Gaterons switches are a little lose, you may want to glue if you have thight keycaps and you want to remove them often. Kailh fits thightly. ALPS switches fits, but not thightly. MORE]

Unfortunately, if i try to fix this now, i will eventually end up making one of the switches not fit. Sorry about that, but there is really little we can do. It is one of the drawbacks if you want switch top removal, Alps combability and fit for Gateron, Cherry and Kailhs at the same time.

Giorgio · « **Reply #144 on:** Wed, 20 May 2015, 03:37:12 »

I prefer stability to compatibility

LeandreN · « **Reply #145 on:** Wed, 20 May 2015, 03:37:59 »

Quote from: Giorgio on Wed, 20 May 2015, 03:37:12

I prefer stability to compatibility

Yes, you do, but this GB is not only for you.

LeandreN · « **Reply #146 on:** Wed, 20 May 2015, 03:52:02 »

How does radius 2mm sound for the corners?

Pietdagamer · « **Reply #147 on:** Wed, 20 May 2015, 03:54:03 »

I'd like something similar to the Pexon aluminium case.

TalkingTree · « **Reply #148 on:** Wed, 20 May 2015, 04:32:38 »

Quote from: LeandreN on Tue, 19 May 2015, 16:19:35

For those who are ordering both? Is there a specific reason?

I'm getting both because I own keycaps for both layouts and I'm eager to try the ANSI as I've only used ISO (IT) so far.
I could say, it's for sake of testing.

TalkingTree · « **Reply #149 on:** Wed, 20 May 2015, 04:34:32 »

Quote from: LeandreN on Wed, 20 May 2015, 03:52:02

How does radius 2mm sound for the corners?

About perfect to me.

News:

Author Topic: [GB] [Round 1 done] ISO & ANSI 60% mountplates (Read 147294 times)