[GB] TGR-Jane v2 CE (QC, Shipping) 99% completed

[ejewell89]

I see your point.

I guess the people that gravitate towards TGR are probably the same folks that like clean looks.

I think having the bottom weight look like that is cool. For example, having the option to replace the CF "weight" here with a bismuth weight would be cool.

I wouldn't try that. bismuth is brittle and the CF plate/weight for the Jane CE is way too thin.

however, i enjoy where your head is. haha

[DukeEsquire]

Ah, fair enough. I didn't know that.

The dream lives on.

[pr0ximity]

Several folks still think my custom anodized Alice and 910 look trashy.

Haters gonna hate, that 910 is the GOAT

[tentboy]

Several folks still think my custom anodized Alice and 910 look trashy.

Didn't realize that was yours, that was my favorite board at the D.C. Meetup!

[Auxo]

I see your point.

I guess the people that gravitate towards TGR are probably the same folks that like clean looks.

I think having the bottom weight look like that is cool. For example, having the option to replace the CF "weight" here with a bismuth weight would be cool.

Worth mentioning that the carbon fiber piece is just a "plate", rather than the actual weight being the interior brass one.

On that note though, I would like to get a custom back plate to someday replace the carbon fiber

[wilarseny]

the issue for me is that i enjoy the bismuth for the imperfections. and a lot of people in this hobby want that pristine look.

I sold one weight once for an Alice and it was a headache. Maybe the hobby isn't ready for that sort of thing yet.

Several folks still think my custom anodized Alice and 910 look trashy.

Show Image

Show Image

Show Image

I think I've been one of those people. I think the board is sick and would look sick with more neutral caps, but pairing it with terminal . . .

dot dot dot

[ejewell89]

Several folks still think my custom anodized Alice and 910 look trashy.

Haters gonna hate, that 910 is the GOAT

Thanks prox! means a lot

Several folks still think my custom anodized Alice and 910 look trashy.

Didn't realize that was yours, that was my favorite board at the D.C. Meetup!

Thanks! I go a lot for the people ive met on the east coast over the years. so i was barely around them. haha.

the issue for me is that i enjoy the bismuth for the imperfections. and a lot of people in this hobby want that pristine look.

I sold one weight once for an Alice and it was a headache. Maybe the hobby isn't ready for that sort of thing yet.

Several folks still think my custom anodized Alice and 910 look trashy.

Show Image

Show Image

Show Image

I think I've been one of those people. I think the board is sick and would look sick with more neutral caps, but pairing it with terminal . . .

dot dot dot

yeah i paid 220 for that terminal and sold it less than two weeks later for 170. It wasnt a good look.

I keep IMSTO irish on it mostly. I just thought terminal might look like a cool grimey fallout style keyboard. but wasn't feeling it.



Lastly, not gonna lie idk where this gasket goes. and i'm having a hard time finding it. haha. good thing diego has a build stream somewhere on his twitter.

[LightningXI]

Lastly, not gonna lie idk where this gasket goes. and i'm having a hard time finding it. haha. good thing diego has a build stream somewhere on his twitter.

Being Twitter famous would net me a better outcome professionally than being relevant on Twitch

But yeah, there should be a VOD. If not, just hmu

It basically just goes between the PCB and plate after you've assembled it.

Lastly, your 910 is p dope. Potatoes gonna potate.

[ejewell89]

It took me over a week to get it right. but we here.

[gMit]

sigh still waiting for shipping invoice

[Auxo]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

YAH YAH YEET

[Chimera]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Griseann looks v good

[funderburker]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Really digging the keyset and all of the infilled engravings. Looking fresh!

[actualglacier]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Very pretty!! what did you use for the infills?

[ejewell89]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Very pretty!! what did you use for the infills?

just a random acrylic paint from amazon.

https://www.amazon.com/gp/product/B07H4HNSXS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's super easy. I absolutely encourage folks to try weird things with their boards. Make it your own, I'm tired of seeing the same OG beige on every high end tkl.

weird today, weird tomorrow, weird always. 

[Acereconkeys]

It's super easy. I absolutely encourage folks to try weird things with their boards. Make it your own, I'm tired of seeing the same OG beige on every high end tkl.

Love this attitude, couldn't agree more!

[rkarp]

So I’ve got the new Tealios coming in for this board. CF plate or Alu plate - I still can’t decide. And now I’m the bell of the ball as I got my Aramex number.

[funderburker]

So I’ve got the new Tealios coming in for this board. CF plate or Alu plate - I still can’t decide. And now I’m the bell of the ball as I got my Aramex number.

Go CF. Heard good things about CF, mostly soundwise. Similar to aluminium in terms of feels but better "soundstage", apparently.

[dgneo]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

this is it chief

[actualglacier]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Very pretty!! what did you use for the infills?

just a random acrylic paint from amazon.

https://www.amazon.com/gp/product/B07H4HNSXS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's super easy. I absolutely encourage folks to try weird things with their boards. Make it your own, I'm tired of seeing the same OG beige on every high end tkl.

weird today, weird tomorrow, weird always. 

this is the kinda attitude I want to see in 2020 👍

also thank you! I might try this when i receive my board then. I'm assuming the paint is completely removable with some alcohol, right?

[rkarp]

So I’ve got the new Tealios coming in for this board. CF plate or Alu plate - I still can’t decide. And now I’m the bell of the ball as I got my Aramex number.

Go CF. Heard good things about CF, mostly soundwise. Similar to aluminium in terms of feels but better "soundstage", apparently.

That's enough for me - CF it is. 

[Jae-3soteric]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Very pretty!! what did you use for the infills?

just a random acrylic paint from amazon.

https://www.amazon.com/gp/product/B07H4HNSXS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's super easy. I absolutely encourage folks to try weird things with their boards. Make it your own, I'm tired of seeing the same OG beige on every high end tkl.

weird today, weird tomorrow, weird always. 

this is the kinda attitude I want to see in 2020

also thank you! I might try this when i receive my board then. I'm assuming the paint is completely removable with some alcohol, right?

Get water based acrylic paint and it will come off easily with some isopropyl and baby wipes. The resin based kind can sometimes be a pain to remove. Also make sure you pick an acrylic paint that is a flat colour and not one with particles in as these can sometimes be fine enough to become lodged in the anodisation itself and not be removed.

Pretty sure I did it on a TC stream for the Space65 as well if you want to hunt the VOD down


Sent from my iPhone using Tapatalk Pro

[ejewell89]

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

this is it chief

Thanks, boss. This is my first Kustom TKL, too. lol. after 5 years I finally got a TKL.

Ya Yeet.

It took me over a week to get it right. but we here.

Show Image

Show Image

Show Image

Show Image

Very pretty!! what did you use for the infills?

just a random acrylic paint from amazon.

https://www.amazon.com/gp/product/B07H4HNSXS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's super easy. I absolutely encourage folks to try weird things with their boards. Make it your own, I'm tired of seeing the same OG beige on every high end tkl.

weird today, weird tomorrow, weird always. 

this is the kinda attitude I want to see in 2020

also thank you! I might try this when i receive my board then. I'm assuming the paint is completely removable with some alcohol, right?

Get water based acrylic paint and it will come off easily with some isopropyl and baby wipes. The resin based kind can sometimes be a pain to remove. Also make sure you pick an acrylic paint that is a flat colour and not one with particles in as these can sometimes be fine enough to become lodged in the anodisation itself and not be removed.

Pretty sure I did it on a TC stream for the Space65 as well if you want to hunt the VOD down


Sent from my iPhone using Tapatalk Pro

NotGlacier- The link I posted is resin based. I do have to put in a little extra elbow grease to remove infills, but i've done it two or three times now with just qtips and isopropyl alcohol with no issues.

If there's an easier way (water based) then by all means give it a whirl.

[tentboy]

Thanks, boss. This is my first Kustom TKL, too. lol. after 5 years I finally got a TKL.

Ya Yeet.

Beautiful build.  I tried to hunt down griseann a while ago with no luck.

For those who changed their shipping addresses, did you wait until you got your shipping invoice or email yuktsi ahead of time?

[Chimera]

Thanks, boss. This is my first Kustom TKL, too. lol. after 5 years I finally got a TKL.

Ya Yeet.

Beautiful build.  I tried to hunt down griseann a while ago with no luck.

For those who changed their shipping addresses, did you wait until you got your shipping invoice or email yuktsi ahead of time?

I asked in the thread a while ago and he said to send him a message. I did put the correct address when paying the shipping invoice as well.

[tentboy]

I asked in the thread a while ago and he said to send him a message. I did put the correct address when paying the shipping invoice as well.

cool, thanks!

[ARSLOCK]

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

[Zacharius]

Show Image

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

I’m not sure if it’s just the lighting, but it looks like the left side of the ano is a CE, while the right side looks like the blue-grey ano


Sent from my iPhone using Tapatalk

[rkarp]

Show Image

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

What are you going to use for the CF plate - I have the 65g tiff blue tealios on order.  BTW, I just posted to your reddit post (dazzlepuzzle).

[ARSLOCK]

I’m not sure if it’s just the lighting, but it looks like the left side of the ano is a CE, while the right side looks like the blue-grey ano

sunlight

[ARSLOCK]

Show Image

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

What are you going to use for the CF plate - I have the 65g tiff blue tealios on order.  BTW, I just posted to your reddit post (dazzlepuzzle).

hopefully some vintage black if I can find some, but might just use more milky gat blacks for now.

[Acereconkeys]

Show Image

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

What are you going to use for the CF plate - I have the 65g tiff blue tealios on order.  BTW, I just posted to your reddit post (dazzlepuzzle).

hopefully some vintage black if I can find some, but might just use more milky gat blacks for now.

Are you planning on using the gasket on any of those builds?

[rkarp]

Show Image

here is my CE with GMK pulse. I used the milky gat blacks with 205g, hiney fr4 half plate and h88 thin pcb. Waiting on switches to build the CF plate, excited about trying that out.

What are you going to use for the CF plate - I have the 65g tiff blue tealios on order.  BTW, I just posted to your reddit post (dazzlepuzzle).

hopefully some vintage black if I can find some, but might just use more milky gat blacks for now.

Are you planning on using the gasket on any of those builds?

I’m going to use it in mine with the tealios.

[Emir]

Anyone else still waiting for invoice? 

[jcwleo]

Anyone else still waiting for invoice? 

I'm here.

[1Raku]

Anyone else still waiting for invoice? 

Same here

Sent from my GM1917 using Tapatalk

[Emir]

Anyone else still waiting for invoice? 

Same here

Sent from my GM1917 using Tapatalk

Ya'll WKL bois?

[1Raku]

Anyone else still waiting for invoice? 

Same here

Sent from my GM1917 using Tapatalk

Ya'll WKL bois?

Yeet, wkl best layout

Sent from my GM1917 using Tapatalk

[vegs]

Anyone else still waiting for invoice? 

Same here

Sent from my GM1917 using Tapatalk

Ya'll WKL bois?

group hug

[tentboy]

Ya'll WKL bois?

Invoiceless WKL boi checking in

Are you planning on using the gasket on any of those builds?

Are people not going to use the gasket with it? I figured that was kinda the standard build

[rmustafa9394]

Anyone else still waiting for invoice? 

Same here

Sent from my GM1917 using Tapatalk

Ya'll WKL bois?

Same hereee

[DukeEsquire]

I imagine most people are still waiting? WKL here.

[rainb1ood]

WKL waiting represent

[zekkin]

last batch TGR bois rise up

[BAS1C]

last batch TGR bois rise up

I feel like there are more than one batch left, no? Did Yuktsi say so?! That would be dope.

[mgsickler]

Just received mine in the mail!

[Zacharius]

last batch TGR bois rise up

Last batch gang we out here


Sent from my iPhone using Tapatalk

[rkarp]

Just received mine in the mail!

Do you know when you received shipping confirmation?  I’m trying to time out my shipment to PA since I have an Amarex number but nothing shows up in Aramex tracking.

[mta]

May be a couple batches in the works (I paid invoice on Jan 7th)

[Chimera]

Just received mine in the mail!

Do you know when you received shipping confirmation?  I’m trying to time out my shipment to PA since I have an Amarex number but nothing shows up in Aramex tracking.

Same. I want to try to schedule a pickup with UPS, but Aramex isn't showing it yet. I'm assuming it's just a label and shipping soon, but I'm not sure.