Author Topic: LeandreN Mekanisk's Projects  (Read 81503 times)

0 Members and 1 Guest are viewing this topic.

Offline 40yroldnerd

  • Posts: 28
Re: LeandreN Mekanisk's Projects
« Reply #150 on: Fri, 22 September 2017, 16:11:09 »
I was close to getting a Revo too, & had they offered a grey version, I would've been totally fine with that and not even been annoyed about this drop.

Offline OnceSavedGaming

  • Posts: 96
  • Location: US-PA
Re: LeandreN Mekanisk's Projects
« Reply #151 on: Fri, 22 September 2017, 16:13:08 »
I was close to getting a Revo too, & had they offered a grey version, I would've been totally fine with that and not even been annoyed about this drop.
Yea if it weren't for the fact I was getting maxkeys Miami nights and now have gmk sky dolch, I wouldn't have wanted any of the revo colors. I want gunmetal or silver all the time. Neutral is best.

Sent from my SM-G920V using Tapatalk


Offline _PixelNinja

  • Posts: 473
  • C=Q/V=ε(A/t)
Re: LeandreN Mekanisk's Projects
« Reply #152 on: Fri, 22 September 2017, 16:52:27 »
Don't get your nickers in a twist. According to 1Up, more Klippe will be in soon™.

Offline Softkore

  • Posts: 71
  • Location: USA
Re: LeandreN Mekanisk's Projects
« Reply #153 on: Fri, 22 September 2017, 16:59:47 »
Don't get your nickers in a twist. According to 1Up, more Klippe will be in soon™.

Wonder if they are already in production or not... They say "R2", so maybe it's coming later (similar to the wait for Fjell R2 ??)

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: LeandreN Mekanisk's Projects
« Reply #154 on: Fri, 22 September 2017, 17:28:33 »
I’ll sell you mine for $250.  Bwahahahahah.  No.  I shouldn’t be evil. 

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: LeandreN Mekanisk's Projects
« Reply #155 on: Fri, 22 September 2017, 17:30:12 »
I got the link from a friend sending me the link. Figured that since it was up on the site, I could go ahead and post it to reddit/share it to friends who want them.

There will be more of them. It's a little frustrating that there were so few of these.

I suspect we'll see a lot of them in the future... Type Machina is coming, after all...
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: LeandreN Mekanisk's Projects
« Reply #156 on: Fri, 22 September 2017, 17:30:28 »
Also, the KBDfans case is pretty cool and you can get it in the same deep purple for $88.

That’s what I’m doing.

Offline 40yroldnerd

  • Posts: 28
Re: LeandreN Mekanisk's Projects
« Reply #157 on: Fri, 22 September 2017, 17:34:18 »
I’ll sell you edmine for $250.  Bwahahahahah.  No.  I shouldn’t be evil.

If its grey, done

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #158 on: Wed, 27 September 2017, 02:38:55 »
Fjell Classic Rev. 2

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #159 on: Wed, 27 September 2017, 03:15:18 »
Coming soontm?
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline Softkore

  • Posts: 71
  • Location: USA
Re: LeandreN Mekanisk's Projects
« Reply #160 on: Wed, 27 September 2017, 07:17:07 »
Fjell Classic Rev. 2
Show Image



Gorgeous!!  :eek:

If we have the Fjell R1, would there be any reason to get the R2? Are there any changes/improvements to the design?

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #161 on: Wed, 27 September 2017, 07:22:04 »
Yes there are improvements, the walls are a little thinner, the case is a tiiiny bit lower and the weight is new, while maintaining the same classic cutout on the bottom it has a larger and new top design.

Offline Softkore

  • Posts: 71
  • Location: USA
Re: LeandreN Mekanisk's Projects
« Reply #162 on: Wed, 27 September 2017, 07:29:18 »
Yes there are improvements, the walls are a little thinner, the case is a tiiiny bit lower and the weight is new, while maintaining the same classic cutout on the bottom it has a larger and new top design.
Awesome! Sounds like you've been hard at work :) I'm kind of moving towards 77-key layouts so I don't know if I can justify getting the R2, but I feel so tempted... Love your work

Sent from my Pixel using Tapatalk


Offline robotsokk

  • Posts: 185
  • Location: USA
Re: LeandreN Mekanisk's Projects
« Reply #163 on: Wed, 27 September 2017, 08:35:41 »
Looks great. I'm glad you maintained the bottom cutout, which is one of my favorite parts of the Fjell classic R1.
@home      @work Swapping out boards... coming soon     wtb

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #164 on: Fri, 29 September 2017, 03:02:42 »



See newsletter mail!

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #165 on: Fri, 29 September 2017, 04:02:33 »
Can you please show what Mekanisk Grey looks like?
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #166 on: Fri, 29 September 2017, 04:03:21 »
Can you please show what Mekanisk Grey looks like?
That will be a surprise, though it will be a cool grey

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #167 on: Fri, 29 September 2017, 04:05:21 »
Can you please show what Mekanisk Grey looks like?
That will be a surprise, though it will be a cool grey
Alright, considered it bought.
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline oli

  • Posts: 18
Re: LeandreN Mekanisk's Projects
« Reply #168 on: Fri, 29 September 2017, 06:25:40 »
Can you please show what Mekanisk Grey looks like?
That will be a surprise, though it will be a cool grey

So it is not the Grey version shown in the comparison photos with the HHKB on the first page? And as such, that colourway will not be available?

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #169 on: Fri, 29 September 2017, 06:32:18 »
Can you please show what Mekanisk Grey looks like?
That will be a surprise, though it will be a cool grey

So it is not the Grey version shown in the comparison photos with the HHKB on the first page? And as such, that colourway will not be available?
Not sure if I will offer that exact grey, however color correction is enough to differentiate grey colors

Offline _PixelNinja

  • Posts: 473
  • C=Q/V=ε(A/t)
Re: LeandreN Mekanisk's Projects
« Reply #170 on: Fri, 29 September 2017, 07:26:21 »
LeandreN,

Is the color survey attached as a screencap an error? Or is it supposed to be some sort of preview?


Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #171 on: Fri, 29 September 2017, 07:27:40 »
LeandreN,

Is the color survey attached as a screencap an error? Or is it supposed to be some sort of preview?
Kinda like a unfinished teaser

Offline _PixelNinja

  • Posts: 473
  • C=Q/V=ε(A/t)
Re: LeandreN Mekanisk's Projects
« Reply #172 on: Fri, 29 September 2017, 07:30:54 »
Kinda like a unfinished teaser
In that case, mission accomplished with the tease — the white option got my attention. White is love, white is life.

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #173 on: Fri, 29 September 2017, 07:35:04 »
LeandreN, PM in your inbox.
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #174 on: Fri, 29 September 2017, 07:40:49 »
LeandreN, PM in your inbox.

Got it, replied :D

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: LeandreN Mekanisk's Projects
« Reply #175 on: Fri, 29 September 2017, 08:11:28 »
Just signed up for the newsletter.  Will I get the email?  Or could someone PM me the details? Thanks

Offline h3xadat

  • Posts: 52
Re: LeandreN Mekanisk's Projects
« Reply #176 on: Fri, 29 September 2017, 08:16:31 »
Just signed up for the newsletter.  Will I get the email?  Or could someone PM me the details? Thanks

The same here ;)

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: LeandreN Mekanisk's Projects
« Reply #177 on: Sat, 30 September 2017, 00:20:49 »
Kinda like a unfinished teaser
In that case, mission accomplished with the tease — the white option got my attention. White is love, white is life.

I want white AND green. green is best

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: LeandreN Mekanisk's Projects
« Reply #178 on: Sat, 30 September 2017, 01:40:13 »
Just signed up for the newsletter.  Will I get the email?  Or could someone PM me the details? Thanks
You will get an e-mail whenever there are some news
Semnătura lu’ pește prăjit ....

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: LeandreN Mekanisk's Projects
« Reply #179 on: Sat, 07 October 2017, 05:05:59 »
Any rumors on when the GB is planed ?  :rolleyes:
Semnătura lu’ pește prăjit ....

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #180 on: Sat, 07 October 2017, 05:15:07 »
Any rumors on when the GB is planed ?  :rolleyes:

I am working on setting up a shipping solution, and deciding which places the GB will be available from, depending on other vendors ability to order.

Let's say that it will be targeted heavily at people from Europe, since 1upkeyboards will get their new stock at the same time as the GB starts.

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: LeandreN Mekanisk's Projects
« Reply #181 on: Sat, 07 October 2017, 05:24:49 »
Good, will it be limited to one per person ? Because I’m thinking about getting 2  :rolleyes:
Semnătura lu’ pește prăjit ....

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #182 on: Sat, 07 October 2017, 05:30:27 »
Good, will it be limited to one per person ? Because I’m thinking about getting 2  :rolleyes:
I don't think so

Offline DanielT

  • * Exquisite Elder
  • Posts: 1252
Re: LeandreN Mekanisk's Projects
« Reply #183 on: Sat, 07 October 2017, 06:02:03 »
Thanks for the info, I will be ready, it’s getting harder and harder not to spend the money I have on my PayPal  :p
Semnătura lu’ pește prăjit ....

Offline Fausuto

  • Posts: 32
Re: LeandreN Mekanisk's Projects
« Reply #184 on: Sat, 07 October 2017, 06:04:21 »
Nice! Looking forward to getting silver & grey. To add with my black one.

Offline BerserkZz

  • Posts: 44
Re: LeandreN Mekanisk's Projects
« Reply #185 on: Thu, 12 October 2017, 23:41:17 »
Is the klippe gb live now? On the website I can't seem to open the link.

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #186 on: Fri, 13 October 2017, 04:43:55 »
Is the klippe gb live now? On the website I can't seem to open the link.
That's because it points to http://notopenyet/
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: LeandreN Mekanisk's Projects
« Reply #187 on: Fri, 13 October 2017, 09:54:09 »
I’m still so pleased with my klippe.  Ive honestly never had a case that made me feel completely satisfied.  Def want more of this quality!

Offline dr-slump

  • Posts: 56
Re: LeandreN Mekanisk's Projects
« Reply #188 on: Fri, 13 October 2017, 13:57:15 »
Is it live yet?
I'm constantly being redirected to notopenyet  :-\(i get the joke)

BTW: Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
« Last Edit: Fri, 13 October 2017, 13:59:10 by dr-slump »
Waiting for GMK Miami Dolch ISO . . .

Looking for: Titainium Spacebar 6.25

      

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: LeandreN Mekanisk's Projects
« Reply #189 on: Fri, 13 October 2017, 14:10:57 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline dr-slump

  • Posts: 56
Re: LeandreN Mekanisk's Projects
« Reply #190 on: Fri, 13 October 2017, 14:15:36 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.


daaaang. i thought that i wouldn't have to pay import duties for once because it's a (mainly) european group buy  :'(
regardless it won't stop me from buying at least 2 :thumb:
Waiting for GMK Miami Dolch ISO . . .

Looking for: Titainium Spacebar 6.25

      

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #191 on: Fri, 13 October 2017, 14:16:38 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.


daaaang. i thought that i wouldn't have to pay import duties for once because it's a (mainly) european group buy  :'(
regardless it won't stop me from buying at least 2 :thumb:
Will try to have a good price to make up for it :)

Offline dr-slump

  • Posts: 56
Re: LeandreN Mekanisk's Projects
« Reply #192 on: Fri, 13 October 2017, 14:20:12 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.


daaaang. i thought that i wouldn't have to pay import duties for once because it's a (mainly) european group buy  :'(
regardless it won't stop me from buying at least 2 :thumb:
Will try to have a good price to make up for it :)

thanks mate!
i'm really hyped for this!!! :D
Waiting for GMK Miami Dolch ISO . . .

Looking for: Titainium Spacebar 6.25

      

Offline pomk

  • Posts: 470
  • Location: Finland
Re: LeandreN Mekanisk's Projects
« Reply #193 on: Sat, 14 October 2017, 05:52:36 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.
Norway is part of the ETA, and because of that import duties should not apply. You will need to pay VAT of course, but the VAT rate in Norway is very high at 25% so paying local VAT instead is preferred anyway.

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: LeandreN Mekanisk's Projects
« Reply #194 on: Sat, 14 October 2017, 05:53:32 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.
Norway is part of the ETA, and because of that import duties should not apply. You will need to pay VAT of course, but the VAT rate in Norway is very high at 25% so paying local VAT instead is preferred anyway.
Yes only VAT

Offline dr-slump

  • Posts: 56
Re: LeandreN Mekanisk's Projects
« Reply #195 on: Sat, 14 October 2017, 07:09:04 »
Will the case ship from Europe or from somewhere else (I'm asking because of the import duties)
From Norway, which is not in the european union, so there will be import duties.
Norway is part of the ETA, and because of that import duties should not apply. You will need to pay VAT of course, but the VAT rate in Norway is very high at 25% so paying local VAT instead is preferred anyway.
Yes only VAT

Thanks for the clarification!
Only 19% for me then  :D
Waiting for GMK Miami Dolch ISO . . .

Looking for: Titainium Spacebar 6.25

      

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: LeandreN Mekanisk's Projects
« Reply #196 on: Sat, 14 October 2017, 17:04:04 »
I’m still so pleased with my klippe.  Ive honestly never had a case that made me feel completely satisfied.  Def want more of this quality!

^this

I wasn’t sure if I liked it when I saw the original designs, but after getting mine I think I’m gonna end up with like 3-4 of em.

Offline wholypantalones

  • Posts: 878
  • Location: The Mitten
  • text and icon mods plz.
Re: LeandreN Mekanisk's Projects
« Reply #197 on: Sat, 14 October 2017, 19:07:35 »
^this

I wasn’t sure if I liked it when I saw the original designs, but after getting mine I think I’m gonna end up with like 3-4 of em.

If only there were a way to actually purchase 3-4 of these..

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
LeandreN Mekanisk's Projects
« Reply #198 on: Sat, 14 October 2017, 19:10:24 »
^this

I wasn’t sure if I liked it when I saw the original designs, but after getting mine I think I’m gonna end up with like 3-4 of em.

If only there were a way to actually purchase 3-4 of these..

What ya mean. The gb won’t have a single case limit and 1up is supposed to restock. From what I understand it’s supposed to be a stocked case.


Sent from my iPad using Tapatalk

Offline wholypantalones

  • Posts: 878
  • Location: The Mitten
  • text and icon mods plz.
Re: LeandreN Mekanisk's Projects
« Reply #199 on: Sat, 14 October 2017, 20:21:58 »
^this

I wasn’t sure if I liked it when I saw the original designs, but after getting mine I think I’m gonna end up with like 3-4 of em.

If only there were a way to actually purchase 3-4 of these..

What ya mean. The gb won’t have a single case limit and 1up is supposed to restock. From what I understand it’s supposed to be a stocked case.


Sent from my iPad using Tapatalk

1up had 25 that sold out in 90 minutes the night before the email was supposed to go out. You can't buy them as of right now until they are restocked or a group buy happens.

I had one in my cart, contemplated the purchase too long and it was gone.

That's what I mean.
« Last Edit: Sat, 14 October 2017, 20:23:38 by wholypantalones »