[IC] GMK Blue on Black (Bob, Subtitle "Signal") - 11/12 GB opened!

[AlexAtPanc]

Yep, down with it.

[wylie]

i like this keyset, it  fairly simple

[poolside]

I would like to register my interest as Burgundy was a success, but the R3 Control now seems to be gone from the render
If the R3 Control with the ^ icon legend can't be made, could a full-touch R3 CapsLock still be included?

So will the updated version have a blue escape with text "Esc"?

Blue esc was deleted because of add the point keycap. But not fixed yet. Still considering including or not.

Yes, please keep the blue accent "Esc".

Also, if an extra R4 | \ keycap was added, this set would fully support US international on ISO 

[cocobrais]

I would like to register my interest as Burgundy was a success, but the R3 Control now seems to be gone from the render
If the R3 Control with the ^ icon legend can't be made, could a full-touch R3 CapsLock still be included?

So will the updated version have a blue escape with text "Esc"?

Blue esc was deleted because of add the point keycap. But not fixed yet. Still considering including or not.

capslock is 2 ea as center stem and offset stem. I think that full-touch R3 capslock means center stem capslock.

Yes, please keep the blue accent "Esc".

Also, if an extra R4 | \ keycap was added, this set would fully support US international on ISO 

[breckstar]

Icon mods. I'm in. Yuri icon mods. I'm double in.

[cocobrais]

Icon mods. I'm in. Yuri icon mods. I'm double in.

Triple in plz.

[alveeno]

Support for N9 and icon mods!

[amnesia0287]

Support for N9 and icon mods!

N9 isn't black... I have a V4 on N9 key and it's really hard to read. Might as well be a blank. Ocean dolch is a much better way to go if you want N9

[cocobrais]

Updated! But So sad because of expected high price

[Atredl]

There are quite a few novelties in the base kit..

[amnesia0287]

Why would this be sooo much more than Coniferous? I only see 3 new molds the esc clouds and the 2 sizes of cloud win keys. Coniferous had 173 keys and was only 150 at 150. 135 at 250.

Also if it were me I'd drop the kbd lab q and GMK keys. And then if the price was still too high the cloud win keys. The R1 esc novelty alone shouldn't raise moq THAT much. A single custom novelty key run at 150 moq is only like $5 a key. But multiples should be cheaper.

3 molds shouldn't add $25 to the price.

[cocobrais]

Why would this be sooo much more than Coniferous? I only see 3 new molds the esc clouds and the 2 sizes of cloud win keys. Coniferous had 173 keys and was only 150 at 150. 135 at 250.

Also if it were me I'd drop the kbd lab q and GMK keys. And then if the price was still too high the cloud win keys. The R1 esc novelty alone shouldn't raise moq THAT much. A single custom novelty key run at 150 moq is only like $5 a key. But multiples should be cheaper.

3 molds shouldn't add $25 to the price.

Yes, you are right. I have to reduce the novelty keys and some keys. I will updated. And maybe I would have to add the space bar to base and delete the LED keys. It will be helpful to decrease the cost.

[cocobrais]

Final version was updated!

[Puddsy]

Final version was updated!

looks good to me

shame there's no stepped windowed caps lock, but i can see why one wouldn't want one

[avid]

Beautiful colors!  Curious if only doing the 4 necessary keys for ISO, how much does that add to price?
https://imgur.com/a/0Kap6

[Puddsy]

Beautiful colors!  Curious if only doing the 4 necessary keys for ISO, how much does that add to price?
https://imgur.com/a/0Kap6

GMK has raised their prices, and the euro has gotten significantly stronger recently, so even a 5 EUR increase can be pretty considerable for people buying with weaker currencies...

For example, KRW or SGD

USD banter incoming

[Atredl]

A bit of a shame we had to loose so many keys but it looks like most compatibility is still present. I think the key I’ll miss the most is row3 control but with this being an all icon set I’ll just pretend the caps arrow means control.

[cocobrais]

Beautiful colors!  Curious if only doing the 4 necessary keys for ISO, how much does that add to price?
https://imgur.com/a/0Kap6

GMK has raised their prices, and the euro has gotten significantly stronger recently, so even a 5 EUR increase can be pretty considerable for people buying with weaker currencies...

For example, KRW or SGD

USD banter incomingI also expect to increase 5euro as total 5 keys(4 ISO+Blue ISO enter). I am sorry for missing ISO keys.

[cocobrais]

A bit of a shame we had to loose so many keys but it looks like most compatibility is still present. I think the key I’ll miss the most is row3 control but with this being an all icon set I’ll just pretend the caps arrow means control.

Sorry for deleting many keys. But I have to consider the price......I also So sad

[pvd]

Looks good! Excited for this group buy.

[cocobrais]

Looks good! Excited for this group buy.

|Many Thanks!!! 

[skizosavior]

I want it, I need it, and I would absolutely get it. I love the use of VR instead of N9, the additional contrast is great imo. Would like to see barred F/J, as well as text icons, but understand that its personal preference, either way I think its amazing!

[aznreaper]

Oh exciting, I'm glad to see this finalized, when are you thinking about starting the buy for this one?

[cocobrais]

I want it, I need it, and I would absolutely get it. I love the use of VR instead of N9, the additional contrast is great imo. Would like to see barred F/J, as well as text icons, but understand that its personal preference, either way I think its amazing!

Thanks and if progress, join this!

[cocobrais]

Oh exciting, I'm glad to see this finalized, when are you thinking about starting the buy for this one?

I don't know exactly. But if many members are interesting, meetnthis soon.

[Vigrith]

Lovely use of full icon mods.

[kmba]

Personally I think you can drop the novelties all together and lower price a bit more, or add in iso support.

[Atredl]

Personally I think you can drop the novelties all together and lower price a bit more, or add in iso support.

It would make sense to do a swap of novelties for ISO. Novelties don't add compatibility for anyone while ISO will.

[ideus]

Dropping the ISO is understandable if the set gets a good pricing. The inclusion of the icon modifiers makes this interesting. What it is a very unfortunate decision is the lack of a six units off-centered space bar.

[cocobrais]

Final update will be done. Wait reallyx5 final update.

[cocobrais]

Relly final version was updated.
I hope that this version will be satisfied for many guys. 

[bkw1209]

Oh no..
 Novelty key....

[cocobrais]

Oh no..
 Novelty key....

I also sad. But this decision is to decrease the cost and add other keys.

[poolside]

This looks good to me 

[avid]

Nice on cocobrais! 

Is there any estimate when this is going to run? I really like the blue + black combination.

[cocobrais]

This looks good to me 

Thanks!! 

[cocobrais]

Nice on cocobrais! 

Is there any estimate when this is going to run? I really like the blue + black combination.

Soon..I hope...but in my expectation, I have to find the proxy out of Korea because of exchange rate. If I will progress own control, it will be high price. 

[ideus]

The set is a first that put a full icon mod to good use and in an elegant color, nothing better.


It requires an icon Esc key, either replacing the standard one, or additional.

[ojrask]

Just posting to get updates and to show support. Looks good. A nice change from the more complex sets that have run recently.

[uniqueskull]

I like that!
I'm in!

[Puddsy]

This is a winner. I'm in.

[poolside]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

[ideus]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

+1, double shot any time. And the 1800 bottom row come with icons, yummy.

[digi]

So simple, yet so good...must...resist...ugh

[txclack]

So many good sets dropping at once.  This one is a 'must have' in my opinion.

[cocobrais]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

Side printing was used in 9009 R1. This is just my concept for this set. As you know, I delete the novelty keys to satisfy many request. Maybe side printing is only remained for my concept. I hope your understanding. 

[ideus]

One more time, this is missing. Either black or blue, or both.

[Atredl]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

Side printing was used in 9009 R1. This is just my concept for this set. As you know, I delete the novelty keys to satisfy many request. Maybe side printing is only remained for my concept. I hope your understanding. 

I'm a fan of the side printing. Please keep it 

[amnesia0287]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

Side printing was used in 9009 R1. This is just my concept for this set. As you know, I delete the novelty keys to satisfy many request. Maybe side printing is only remained for my concept. I hope your understanding. 

I think he’s asking if they can doubleshot the top legend and only print the front legend.

[cocobrais]

Nice to see ISO and G80-1800 bottom row come back 

Could the numpad pad printed side legends be changed to doubleshot on the top? I had never seen these numpad side prints until today, and they unfortunately look very cheap. It's even worse than the "SysReq" and "Break" pad prints usually featured on the Scroll Lock and Pause keycaps.

Side printing was used in 9009 R1. This is just my concept for this set. As you know, I delete the novelty keys to satisfy many request. Maybe side printing is only remained for my concept. I hope your understanding. 

I think he’s asking if they can doubleshot the top legend and only print the front legend.

I hope so