Author Topic: PEXON PCs - Custom USB, PC and Audio Cables (Read 449714 times)

WNovizar · « **Reply #1100 on:** Sun, 22 May 2016, 05:28:52 »

The hell is beastwrap?

mteinum · « **Reply #1101 on:** Sun, 22 May 2016, 06:06:36 »

PuLSE in da house

pexon pcs - usb cable - 550! pulse by Morten Teinum, on Flickr

katushkin · « **Reply #1102 on:** Sun, 22 May 2016, 07:12:01 »

Quote from: WNovizar on Sun, 22 May 2016, 05:28:52

The hell is beastwrap?

A BEAST wrap is this:

UTEster750 · « **Reply #1103 on:** Wed, 25 May 2016, 05:44:50 »

Quote from: katushkin on Sun, 22 May 2016, 07:12:01

Quote from: WNovizar on Sun, 22 May 2016, 05:28:52
The hell is beastwrap?

A BEAST wrap is this:

Show Image

BEASTwrap is the s**t!

Skydra · « **Reply #1104 on:** Thu, 09 June 2016, 23:28:22 »

Quote from: katushkin on Sun, 22 May 2016, 07:12:01

Quote from: WNovizar on Sun, 22 May 2016, 05:28:52
The hell is beastwrap?

A BEAST wrap is this:

Show Image

How to buy this? I looked at the website and i couldn't find any option for beast wrap :(

pexon · « **Reply #1105 on:** Fri, 10 June 2016, 03:51:53 »

Yea, we took them down as they take ages to make, especially on long cables. If you wanted one, I could probably squeeze one in for a short length

NrvsYet · « **Reply #1106 on:** Mon, 27 June 2016, 12:21:23 »

Hi there,

I recently picked a new desk and I've noticed that my Filco MJ2 TKL no longer comfortably reaches the USB ports on my tower. I've been considering one of your style mod cables for a while. Now, armed with an excuse I feel I'm ready to take the plunge. My only problem is that I have no idea which colours match my setup (colour coordination is not my thing). I was hoping you could have a look at my setup and provide me with a few recommendations.

Thank you in advance.

pexon · « **Reply #1107 on:** Mon, 27 June 2016, 15:14:57 »

Hey!

I think something like [550] Blue Snake or [550] Naval Camo would work reall well for that board. Alternatively, you could go with plain black Teleios or Teleios Fusion Blue/Black

NrvsYet · « **Reply #1108 on:** Mon, 27 June 2016, 18:46:03 »

Thank you for the quick response. I've just put through an order for a couple of cables. I went with the blue snake and the black reflect. I look forward to seeing them!

pexon · « **Reply #1109 on:** Tue, 28 June 2016, 02:49:09 »

Thanks for the support

Reflect black is also a nice colour too, good choice

Turbodruk · « **Reply #1110 on:** Fri, 01 July 2016, 16:53:07 »

Would it be possible for you to do an angled connector + sleeving on the connector?

Mini usb with right angled connector.

pexon · « **Reply #1111 on:** Fri, 01 July 2016, 17:44:03 »

Quote from: Turbodruk on Fri, 01 July 2016, 16:53:07

Would it be possible for you to do an angled connector + sleeving on the connector?
Show Image

Mini usb with right angled connector.

No bro. We only offer angled fitments as adapters not as proper cables. Angled mini usb DIY connectors are not good quality wise

Turbodruk · « **Reply #1112 on:** Sat, 02 July 2016, 03:46:55 »

Would it be possible to just put a colored heatshrink on the adapter? I can heatshrink but not as nice as you could do.

pexon · « **Reply #1113 on:** Sun, 07 August 2016, 16:14:49 »

Hey dudes, latest update is online!

https://imgur.com/a/vSTOL

HPE1000 · « **Reply #1114 on:** Sun, 07 August 2016, 16:39:25 »

Quote from: pexon on Sun, 07 August 2016, 16:14:49

Hey dudes, latest update is online!

https://imgur.com/a/vSTOL

Show Image

I see mine in there :)

Can't wait, thanks!

pexon · « **Reply #1115 on:** Sun, 07 August 2016, 16:41:17 »

I remembered to pop the black plastic connector on there for you and added a gold USB A : )

HPE1000 · « **Reply #1116 on:** Sun, 07 August 2016, 16:52:28 »

Quote from: pexon on Sun, 07 August 2016, 16:41:17

I remembered to pop the black plastic connector on there for you and added a gold USB A : )

Me right now

May my original usb cable rest in pieces (quite literally)

That superflower psu looks amazing btw

pexon · « **Reply #1117 on:** Sun, 07 August 2016, 17:12:09 »

lol

this boy? I love it

UTEster750 · « **Reply #1118 on:** Mon, 08 August 2016, 04:00:25 »

Quote from: pexon on Sun, 07 August 2016, 17:12:09

lol

Show Image

this boy? I love it

All your cables are going to make that psu look amazing! :eek:

pexon · « **Reply #1119 on:** Tue, 23 August 2016, 16:38:59 »

Hey guys, time for another update

http://imgur.com/a/2eOVs

clappingcactus · « **Reply #1120 on:** Tue, 23 August 2016, 17:32:47 »

Excellent and welcome back. Just placed order 4301, my first with Pexon PCs and I'm hyped. I've been a fan for a long, long time, and the order I placed today was to replicate a cable I'd seen you post in an update years ago. Hope you know how special it is for someone in the keyboard community to be in love with one of your works for that long.

Was wondering if my ordered SATA cable can match my ordered USB cable in anyway (i.e. same Teleios colour for example).

pexon · « **Reply #1121 on:** Tue, 23 August 2016, 17:51:11 »

Quote from: clappingcactus on Tue, 23 August 2016, 17:32:47

Excellent and welcome back. Just placed order 4301, my first with Pexon PCs and I'm hyped. I've been a fan for a long, long time, and the order I placed today was to replicate a cable I'd seen you post in an update years ago. Hope you know how special it is for someone in the keyboard community to be in love with one of your works for that long.

Was wondering if my ordered SATA cable can match my ordered USB cable in anyway (i.e. same Teleios colour for example).

Thanks so much for your support!

Purple Teleios can be applied and is standars on all sata canles

pexon · « **Reply #1122 on:** Mon, 12 September 2016, 15:15:19 »

Hey dudes and dudettes, here is another update!

http://imgur.com/a/LYWxr

<3 james/ pex

pexon · « **Reply #1123 on:** Wed, 28 September 2016, 05:11:57 »

Whats up guys?!

Time for another update, this one is HEFTY: -http://imgur.com/a/ytQBO

Lot of audio cables and PSUs in this one, note, not all cables are photo'd so if yours is not their, its either on its way or not quite finished as of yet.

As always, thanks for the support and thank you for taking a look!

<3 James

Bromono · « **Reply #1124 on:** Sat, 29 October 2016, 16:03:44 »

Yo pexon. Do you make DT990 replacement cables?

pexon · « **Reply #1125 on:** Tue, 01 November 2016, 04:50:36 »

Quote from: Bromono on Sat, 29 October 2016, 16:03:44

Yo pexon. Do you make DT990 replacement cables?

Yo bro. Aren't they hard wired?

Bromono · « **Reply #1126 on:** Tue, 01 November 2016, 06:17:56 »

Quote from: pexon on Tue, 01 November 2016, 04:50:36

Quote from: Bromono on Sat, 29 October 2016, 16:03:44
Yo pexon. Do you make DT990 replacement cables?

Yo bro. Aren't they hard wired?

Yes

suicidal_orange · « **Reply #1127 on:** Tue, 01 November 2016, 16:49:27 »

Quote from: Bromono on Tue, 01 November 2016, 06:17:56

Quote from: pexon on Tue, 01 November 2016, 04:50:36
Quote from: Bromono on Sat, 29 October 2016, 16:03:44
Yo pexon. Do you make DT990 replacement cables?

Yo bro. Aren't they hard wired?

Yes

I've never worked on Beyers but if you're not afraid of (de)soldering the drivers I'm sure an unterminated cable is a possibility - are they single sided or both?

Might be fun getting the wire through the headband to the second side, but maybe you could attach string to the old one before pulling it out and use that to fit the new one? Would mean having them disabled while measuring and ordering and waiting for it to be made and for the postman though, not good!

Mr_BeastQuake · « **Reply #1128 on:** Tue, 01 November 2016, 19:53:58 »

Yo, I recently picked up a Novatouch and had a cable on order through Pexon that utilizes the middle metal connector (no idea what this is called) but it has USB mini connector on male (?) side. I emailed to see about getting an additional male side cord with a micro USB. Not sure if things can get broken down like this. It also used Teleios, which seems like is no longer available..

Haven't gotten a response via email, probably a bit impatient and nervous I'll be too late.

pexon · « **Reply #1129 on:** Wed, 02 November 2016, 04:38:25 »

Quote from: Mr_BeastQuake on Tue, 01 November 2016, 19:53:58

Yo, I recently picked up a Novatouch and had a cable on order through Pexon that utilizes the middle metal connector (no idea what this is called) but it has USB mini connector on male (?) side. I emailed to see about getting an additional male side cord with a micro USB. Not sure if things can get broken down like this. It also used Teleios, which seems like is no longer available..

Haven't gotten a response via email, probably a bit impatient and nervous I'll be too late.

Hey dude, where did you email? info@pexonpcs.co.uk? We get back quickly on that one, so if you've not gotten a response, can you fire over the email again please

We have a small stock of Teleios in just for this reason, so it will be doable for you!

Mr_BeastQuake · « **Reply #1130 on:** Wed, 02 November 2016, 12:12:29 »

Quote from: pexon on Wed, 02 November 2016, 04:38:25

Quote from: Mr_BeastQuake on Tue, 01 November 2016, 19:53:58
Yo, I recently picked up a Novatouch and had a cable on order through Pexon that utilizes the middle metal connector (no idea what this is called) but it has USB mini connector on male (?) side. I emailed to see about getting an additional male side cord with a micro USB. Not sure if things can get broken down like this. It also used Teleios, which seems like is no longer available..

Haven't gotten a response via email, probably a bit impatient and nervous I'll be too late.

Hey dude, where did you email? info@pexonpcs.co.uk? We get back quickly on that one, so if you've not gotten a response, can you fire over the email again please

We have a small stock of Teleios in just for this reason, so it will be doable for you!

Aye, I did. I just forwarded my original email back to that address again. Thanks for getting back to me.

khemist · « **Reply #1131 on:** Sat, 05 November 2016, 10:12:06 »

James, could you please cancel order 4639?, i made the order last night but i don't need it anymore, thanks a lot.

dorf · « **Reply #1132 on:** Fri, 25 November 2016, 12:12:58 »

Love your work, man!

pexon · « **Reply #1133 on:** Mon, 28 November 2016, 15:06:42 »

Looks great dude! What board is that?

dorf · « **Reply #1134 on:** Mon, 28 November 2016, 15:13:24 »

It's GH60 rev C from Falbatech in a TEX case. Cherry OG and black icon mods.

Elth · « **Reply #1135 on:** Mon, 28 November 2016, 15:13:40 »

Heya pexon, did you get my email re: HD650 cable?

FunTyme · « **Reply #1136 on:** Tue, 29 November 2016, 20:50:15 »

Took advantage of the deal and got myself a new style Realforce cable. It's the last piece of the puzzle that is my keyboard lol. Can't wait!

pexon · « **Reply #1137 on:** Wed, 30 November 2016, 07:13:24 »

Quote from: dorf on Mon, 28 November 2016, 15:13:24

It's GH60 rev C from Falbatech in a TEX case. Cherry OG and black icon mods.

Looks awesome dude

Great job!

@elth where did you fire it over to dude?

@edrylle great choice, they finish off Realforce boards so nice! What colour combo did you go for?

FunTyme · « **Reply #1138 on:** Wed, 30 November 2016, 15:04:19 »

I went with a Shade 19 cable for some contrast to the light blue on my white 87u. I'm sure you'll be seeing it on the internet somewhere.

Elth · « **Reply #1139 on:** Wed, 30 November 2016, 16:44:08 »

Quote from: pexon on Wed, 30 November 2016, 07:13:24

Quote from: dorf on Mon, 28 November 2016, 15:13:24
It's GH60 rev C from Falbatech in a TEX case. Cherry OG and black icon mods.

Looks awesome dude Great job!

@elth where did you fire it over to dude?

@edrylle great choice, they finish off Realforce boards so nice! What colour combo did you go for?

It was via the website contact form.

pexon · « **Reply #1140 on:** Thu, 01 December 2016, 16:29:40 »

Quote from: Elth on Wed, 30 November 2016, 16:44:08

Quote from: pexon on Wed, 30 November 2016, 07:13:24
Quote from: dorf on Mon, 28 November 2016, 15:13:24
It's GH60 rev C from Falbatech in a TEX case. Cherry OG and black icon mods.

Looks awesome dude Great job!

@elth where did you fire it over to dude?

@edrylle great choice, they finish off Realforce boards so nice! What colour combo did you go for?
It was via the website contact form.

I will double check, if not can you send it over as a straight up email to info@pexonpcs.co.uk and I will see what we can do for you brother

Elth · « **Reply #1141 on:** Thu, 01 December 2016, 16:40:14 »

Quote from: pexon on Thu, 01 December 2016, 16:29:40

Quote from: Elth on Wed, 30 November 2016, 16:44:08
Quote from: pexon on Wed, 30 November 2016, 07:13:24
Quote from: dorf on Mon, 28 November 2016, 15:13:24
It's GH60 rev C from Falbatech in a TEX case. Cherry OG and black icon mods.

Looks awesome dude Great job!

@elth where did you fire it over to dude?

@edrylle great choice, they finish off Realforce boards so nice! What colour combo did you go for?
It was via the website contact form.

I will double check, if not can you send it over as a straight up email to info@pexonpcs.co.uk and I will see what we can do for you brother

Incoming

pexon · « **Reply #1142 on:** Sat, 10 December 2016, 13:00:08 »

Hey dudes and dudettes!
Holy moly, what a hectic last few weeks, what with black friday, christmas and the meet up (which was good, I can't wait for the next one!).
We have a hoooooooooge update this time around, lots of pretty stuff and good to see some nice MDPC-X cables going out too, on PSU and USB cables.
UPDATE IMAGES: - http://imgur.com/a/fr8wq

<3 james/ pex

le_wraith · « **Reply #1143 on:** Sun, 25 December 2016, 20:55:52 »

Edit: now with correct link showing actual image. = )

Yo guys,

I've never ordered from Pexon before but I just endgamed my HHKB with novas, 55g domes and silencers and feel it needs a premium pexon USB cord as the finishing touch.

I was thinking maybe double-coil using a safety-orange base layer with an army-ish or olive green as the second layer. It's got to be badass. I want women and little children to shriek and cower in fear. Any thoughts/ideas as to what would look good?

Here is a pic of the board: http://imgur.com/a/hPWBT

pexon · « **Reply #1144 on:** Mon, 26 December 2016, 13:34:55 »

Quote from: le_wraith on Sun, 25 December 2016, 20:55:52

Yo guys,

I've never ordered from Pexon before but I just endgamed my HHKB with novas, 55g domes and silencers and feel it needs a premium pexon USB cord as the finishing touch.

I was thinking maybe double-coil using a safety-orange base layer with an army-ish or olive green as the second layer. It's got to be badass. I want women and little children to shriek and cower in fear. Any thoughts/ideas as to what would look good?

Here is a pic of the board: https://photos.google.com/photo/AF1QipOV5h_mesl6v35_x1ojM9KWgd6LhbuJsRqeU-id

Hey dude, Merry Christmas!

The photo is not showing

le_wraith · « **Reply #1145 on:** Mon, 26 December 2016, 15:29:35 »

Thanks for letting me know. Fixed in post above via Orwellian magic.

pexon · « **Reply #1146 on:** Mon, 26 December 2016, 17:58:39 »

Safety Orange or Orange Camo as the base with Techflex Black or Carbon on top will look

couple it with black shrink too

LDobler · « **Reply #1147 on:** Thu, 29 December 2016, 06:35:56 »

Do you also sell sleeved SATA 3 cables (for the VE.A.)?

clappingcactus · « **Reply #1148 on:** Thu, 29 December 2016, 07:49:17 »

Quote from: LDobler on Thu, 29 December 2016, 06:35:56

Do you also sell sleeved SATA 3 cables (for the VE.A.)?

They do! You can get them custom, or sleeve matched if you buy them with another cable.

pexon · « **Reply #1149 on:** Thu, 29 December 2016, 17:04:16 »

We sure do!

http://pexonpcs.co.uk/products/sata-3-6gbps-data-cables


120/100g linear Zealio R1 GMK Hyperfuse 'Split everything' perfection	MX Clear SA Hack'd by Geeks EasyAVR mod

News:

Author Topic: PEXON PCs - Custom USB, PC and Audio Cables (Read 449714 times)