NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Quote from: 00zeRO on Thu, 25 June 2015, 07:05:28Quote from: Lokomotivet on Thu, 25 June 2015, 06:10:09I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgMore artisan caps would be cool as well. ISO items have not done well in times past, so there are no active plans for them.As for the artisan keycaps, we have a few up for preorder now...Totally understandable, but not even low batches?Where do I find preorders? I can see some new HKPs but they are just out of stock.
Quote from: Lokomotivet on Thu, 25 June 2015, 06:10:09I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgMore artisan caps would be cool as well. ISO items have not done well in times past, so there are no active plans for them.As for the artisan keycaps, we have a few up for preorder now...
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgMore artisan caps would be cool as well.
Quote from: Lokomotivet on Thu, 25 June 2015, 08:09:50Quote from: 00zeRO on Thu, 25 June 2015, 07:05:28Quote from: Lokomotivet on Thu, 25 June 2015, 06:10:09I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgMore artisan caps would be cool as well. ISO items have not done well in times past, so there are no active plans for them.As for the artisan keycaps, we have a few up for preorder now...Totally understandable, but not even low batches?Where do I find preorders? I can see some new HKPs but they are just out of stock.Find them here in our newly redesigned Incoming Keyboards and Accessories page:https://mechanicalkeyboards.com/incoming.php
Quote from: 00zeRO on Thu, 25 June 2015, 12:57:12Quote from: Lokomotivet on Thu, 25 June 2015, 08:09:50Quote from: 00zeRO on Thu, 25 June 2015, 07:05:28Quote from: Lokomotivet on Thu, 25 June 2015, 06:10:09I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgMore artisan caps would be cool as well. ISO items have not done well in times past, so there are no active plans for them.As for the artisan keycaps, we have a few up for preorder now...Totally understandable, but not even low batches?Where do I find preorders? I can see some new HKPs but they are just out of stock.Find them here in our newly redesigned Incoming Keyboards and Accessories page:https://mechanicalkeyboards.com/incoming.phpSorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order? Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.
i know people who think salt is spicy
Will you guys carry the new ducky mouse?
Quote from: Apocalyptixs on Mon, 27 April 2015, 23:44:05Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.We are looking forward to selling out of all other colors. Soon as that happens, you can believe we will restock Purple cases.
Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.
MoreQuote from: sethk_ on Mon, 06 July 2015, 20:14:46Quote from: bcredbottle on Mon, 06 July 2015, 20:10:50Quote from: sethk_ on Mon, 06 July 2015, 19:28:52Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysWould it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/Sadly no I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
Quote from: bcredbottle on Mon, 06 July 2015, 20:10:50Quote from: sethk_ on Mon, 06 July 2015, 19:28:52Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysWould it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/Sadly no
Quote from: sethk_ on Mon, 06 July 2015, 19:28:52Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysWould it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways
Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.
Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD thread
Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?
Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly available
Ergodox cases that are not $100+, please!
Quote from: bcredbottle on Mon, 06 July 2015, 20:16:42MoreQuote from: sethk_ on Mon, 06 July 2015, 20:14:46Quote from: bcredbottle on Mon, 06 July 2015, 20:10:50Quote from: sethk_ on Mon, 06 July 2015, 19:28:52Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysWould it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/Sadly no I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!So you want ALPs plate in there? I can do that.
Quote from: sethk_ on Mon, 06 July 2015, 20:23:32Quote from: bcredbottle on Mon, 06 July 2015, 20:16:42MoreQuote from: sethk_ on Mon, 06 July 2015, 20:14:46Quote from: bcredbottle on Mon, 06 July 2015, 20:10:50Quote from: sethk_ on Mon, 06 July 2015, 19:28:52Quote from: bcredbottle on Mon, 06 July 2015, 19:03:10Quote from: sethk_ on Mon, 06 July 2015, 18:48:11Quote from: bcredbottle on Mon, 06 July 2015, 18:34:08Quote from: sethk_ on Mon, 06 July 2015, 17:48:57Quote from: bcredbottle on Mon, 06 July 2015, 16:47:33Quote from: sethk_ on Mon, 06 July 2015, 16:19:49Quote from: bcredbottle on Mon, 06 July 2015, 14:33:16Ergodox cases that are not $100+, please!then get one custom cut. the files are publicly availableE.g. at?Living CAD threadBut it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).Of course, if I can ever repay you in some way, just say the word.https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zipI will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysWould it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/Sadly no I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!So you want ALPs plate in there? I can do that.Yes, please! I am forever indebted!
Just noticed that you guys got some FC660C's in stock Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?Also, are the FC660M's you guys have in stock made in Korea, or China?
Removed most of the conversation between seth and bcred just as a cleanup. If I accidentally removed something else, my bad! I'm rusty.
Quote from: CommonCurt on Fri, 03 July 2015, 03:32:24Just noticed that you guys got some FC660C's in stock Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?Also, are the FC660M's you guys have in stock made in Korea, or China?We certainly have plans to carry just as much Leopold as we can, and then some... We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.
Any chance for Leopold FC660M with clears anytime soon?
KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?
Quote from: ShakeR on Wed, 08 July 2015, 13:23:10Removed most of the conversation between seth and bcred just as a cleanup. If I accidentally removed something else, my bad! I'm rusty.omg, who's this guy?!?!
Quote from: dante on Wed, 08 July 2015, 18:25:39KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?Yesterday. Very limited quantities though. Larger shipment coming in August or September.
Quote from: Chylo on Wed, 08 July 2015, 17:28:56Any chance for Leopold FC660M with clears anytime soon?+1
Quote from: JoshMK on Thu, 09 July 2015, 09:21:24Quote from: dante on Wed, 08 July 2015, 18:25:39KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?Yesterday. Very limited quantities though. Larger shipment coming in August or September. If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy? Maybe not on this initial shipment as it's probably already in transit but maybe on the next?
We have thousands of Fukka switches.
Fukka = Taihao = Fuhua = FellyDu = ?The only official name (at this moment, that I'm aware of) is TaiHao.
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.If they're there, and I just don't see it then I apologize.
Quote from: CommonCurt on Sun, 12 July 2015, 01:10:50Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.If they're there, and I just don't see it then I apologize.https://mechanicalkeyboards.com/incoming.phphttps://mechanicalkeyboards.com/arrived.php
Quote from: trees on Sun, 12 July 2015, 03:07:08Quote from: CommonCurt on Sun, 12 July 2015, 01:10:50Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.If they're there, and I just don't see it then I apologize.https://mechanicalkeyboards.com/incoming.phphttps://mechanicalkeyboards.com/arrived.phpAh, I see what my issue was. I had https://mechanicalkeyboards.com/shop/ bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.
Women always figure out the truth. Always. - Han Solo
When do you guys expect some more Black or Smoke KUL clears?
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!
Quote from: UsualSuspectXXX on Tue, 14 July 2015, 22:21:56Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.
Any chance of restocking brown switches soon?
Quote from: Danboard on Thu, 23 July 2015, 16:58:55Any chance of restocking brown switches soon?December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?
Quote from: 00zeRO on Thu, 23 July 2015, 22:54:56Quote from: Danboard on Thu, 23 July 2015, 16:58:55Any chance of restocking brown switches soon?December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?Show Image
Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?
Do you think you guys will ever stock some non low profile aluminum 60% cases?
Quote from: CommonCurt on Thu, 30 July 2015, 04:38:36Do you think you guys will ever stock some non low profile aluminum 60% cases?As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Quote from: 00zeRO on Thu, 30 July 2015, 07:14:10Quote from: CommonCurt on Thu, 30 July 2015, 04:38:36Do you think you guys will ever stock some non low profile aluminum 60% cases?As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.Basically cases were you can't see the switch housing.
Quote from: CommonCurt on Thu, 30 July 2015, 07:17:27Quote from: 00zeRO on Thu, 30 July 2015, 07:14:10Quote from: CommonCurt on Thu, 30 July 2015, 04:38:36Do you think you guys will ever stock some non low profile aluminum 60% cases?As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.Basically cases were you can't see the switch housing.Do you know of any aluminum cases with this higher profile?
Quote from: 00zeRO on Thu, 30 July 2015, 07:52:48Quote from: CommonCurt on Thu, 30 July 2015, 07:17:27Quote from: 00zeRO on Thu, 30 July 2015, 07:14:10Quote from: CommonCurt on Thu, 30 July 2015, 04:38:36Do you think you guys will ever stock some non low profile aluminum 60% cases?As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.Basically cases were you can't see the switch housing.Do you know of any aluminum cases with this higher profile?This is what I'm talking about.Here is a example of a low profile TEX case next to a normal height MKC case. See how the MKC case hides the switch housings?Show ImageTEX 60% vs MKC 60% by Compact Keyboards, on FlickrMore non low profile case examples. These particular cases were from group buys.Show ImageHammer & Duck Poker Pitch Comparision by Compact Keyboards, on FlickrThis is one that was sold on Massdrop.Show Image