[GB] PCB Mounted Cherry Stabilizers (shipping)

[ceflame]

5/17/2015 All International orders shipped. US orders shipping out 5/18/2015
5/5/2015 Order currently shipping to us
5/4/2015 Order has been placed, awaiting shipment

(image from winkeyless.kr)
Planned GB Schedule:

• Taking Orders [2 weeks - I will start invoicing in the second week]
• Contacting vendor and placing order [1-3 days]
• Bulk order placed - preparation [1 week]
• Order shipping to us [1-2 weeks]
• Orders shipping to you - we are here!

This is a group buy for PCB Mounted Cherry Stabilizers, proxied from Hojin.Yi of Winkeyless.kr.
Orders will be separated by US buyers and non-US buyers. Please select the proper order form to avoid any confusion.
I will be handling US orders, and Lpwl will be handling international orders.
Please PM or comment with any concerns. If have questions regarding international orders, message Lpwl.
(if you are International with order of 1-2 sets, and would still prefer US shipping, just PM me)

There will likely be extras purchased to account for missing orders and miscounts.

Stabilizer Pricing; US | International:
TKL Stabilizer Set - $12.00 | 11.60 €
Four 2.0x unit stabilizers
One 6.25x or 7.00x unit stabilizer

Full Stabilizer Set - $15.00 | 14.50 €
Seven 2.0x unit stabilizers
One 6.25x or 7.00x unit stabilizer

Extra 2.0x unit stabilizers - $1.50/ea | 1,45 €/ea

Shipping (US): Shipped from California
$3.00 for 1-2 sets via First-Class Mail Parcel
$5.95 for 3+ sets via Priority Mail Small Flat Rate Box
All US orders will be tracked

Shipping (International): Shipped from France
(may vary based on location and order size)
For 1 TKL set (< 20g):
shipping within France: 1.10 €
shipping within Europe: 1.20 €
shipping in other countries: 1.50 €

For ~3/4 TKL sets or 2 full-size sets (< 50g):
shipping within France: 1.50 €
shipping within Europe: 1.80 €
shipping in other countries: 2.40 €

For ~6/7 TKL sets or 4 full-sized sets (< 100g):
shipping within France: 2.20 €
shipping within Europe: 2.30 €
shipping in other countries: 2.90 €

Shipping options available:
Tracked: +3.20 €
Registered: +4.30 €

Paypal fee will be added on to the shipping cost in the invoice.


Order Form for USA Buyers
Order Form for International Buyers

[Flyersfan1]

Awesome!!!! Ordering two full sets!!!

[ZUUL42]

Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

UPDATE
Doh! I must apologize. In the excitement I didn't notice the details. I need plate mount stabilizers. Your offer is very kind, but sadly I must bow out.

[heedpantsnow]

This is soooo needed!  Thanks!

[ceflame]

Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

I don't really want to complicate things with this buy.
I'm actually thinking of removing the TKL option and just taking orders for full sets (just a $3 price difference). I think it would make it easier for us and everyone else if we can get to the 100 MOQ bulk price drop so we can order more extras.
I'm not sure how many people are interested in each at this point, so we'll see.

For your situation, just buy the full set, and I can send you an extra 2.0x unit wire.
I have a couple extras with me, so just leave it in the comment section of your order.

[heedpantsnow]

Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

People are almost always looking for 6.25 wires. You can use it to help sby out.

[jonathanyu]

6.25 wire will be bent or straight?

[ceflame]

6.25 wire will be bent or straight?

Straight

[Giorgio]

I'm interested in a full pcb set, but please.... Add the plate mount option, really... Also if it may feel counter intuitive, I'm sure that it would make it easier reaching the moq

[heedpantsnow]

I've already ordered, just curious.

Are these screw in or snap in?

Are these genuine Cherry not Chinese knockoffs?

[ceflame]

I'm interested in a full pcb set, but please.... Add the plate mount option, really... Also if it may feel counter intuitive, I'm sure that it would make it easier reaching the moq

 
Sorry, probably won't be adding plate-mounted stabs into this buy.

I have emailed you back my reasoning, hope you understand!

I've already ordered, just curious.

Are these screw in or snap in?

Are these genuine Cherry not Chinese knockoffs?

These should be snap in stabilizers.

I have confirmed with Hojin that they are genuine Cherry, as he stated Cherry as their supplier for the 2x unit stabs. 

edit: Currently looking into possibilities of adding extra 2x unit stabilizers.

[admiralvorian]

ordered!

[r0mIe_Ng]

Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!

[animated]

Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!

Noobie question here.  Would these work for the Orion V2 since Orion is plate mounted and these are PCB mounted?

[r0mIe_Ng]

Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!

Noobie question here.  Would these work for the Orion V2 since Orion is plate mounted and these are PCB mounted?

Holy sh*t, thanks for noticing about that. I just realize this is PCB mounted, and V2 has plate... noobie order

[rainb1ood]

It will work with the Orion V2

[r0mIe_Ng]

It will work with the Orion V2

Does it?

[rainb1ood]

Duck's plates are compatible with PCB mount, if not, only for PCB mounted

See pic

[Dreamre]

It will work with the Orion V2

Does it?

The Orion is a Korean custom. Most, if not all, use PCB mounted stabs even though there are plates.

[r0mIe_Ng]

Duck's plates are compatible with PCB mount, if not, only for PCB mounted

See pic

Show Image

It will work with the Orion V2

Does it?

The Orion is a Korean custom. Most, if not all, use PCB mounted stabs even though there are plates.

Thanks for your information!

[awhitedev]

I'm definitely in for 1 full set... might add more though

[Lpwl]

Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

[awhitedev]

Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

Show Image

Show Image

Show Image

Nice! What should we do to add items to our order? PM? Resubmit form?

[Lpwl]

Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

Show Image

Show Image

Show Image

Nice! What should we do to add items to our order? PM? Resubmit form?

For my part (International orders) : Choose one or the other, it makes no difference.

But maybe ceflame has a different opinion on this so you'll have to wait for his answer :)

[Lastpilot]

Form filled, thank you.

[ceflame]

Sorry.. edited the form right before I slept and it screwed up the formatting and I didn't see..

AS Lpwl said, there are now extra 2x unit stabilizers to add-on to order.

If you ordered from me, just PM me to add-on, and I'll put it in manually.

[kacase]

Ordered as well for my Orion V2

[Cods]

Ordered. Thanks!

[awhitedev]

How many / more do we need for MOQ?

[ceflame]

The numbers are looking fine so far.

[Lpwl]

As Ceflame indicated, the quantity needed for the price break is 100 sets - so don't be shy, keep them coming !

At least 10 sets must be ordered to let us break even from proxying this GB.

I'm pretty sure we can do better than this, don't you think ? 

[ceflame]

Hey everyone!

Sending out order confirmation PMs right now.

Invoices will go out soon, as we are heading into the last week.

[hjc1710]

Just hopped in for 5 sets!

Thanks for setting this up my good man! Came just in time, really do appreciate it .

[ceflame]

Just hopped in for 5 sets!

Thanks for setting this up my good man! Came just in time, really do appreciate it .

Thanks a bunch for the support man

Invoices will be start to go out tomorrow evening up until the order end date.

[asgeirtj]

6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here?

[suicidal_orange]

6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here?

The wires are bent at the ends but some have two bends along the long part which these won't have

[asgeirtj]

6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here?

The wires are bent at the ends but some have two bends along the long part which these won't have

Ah I see now, but why are some bent like that in the middle, what's the utility in that?

Also, I'm wondering whether to pull the trigger on these to be set in the future when I'll build a Kustom, however what's the advantage of buying in this gb as opposed to from gon for example?

[ceflame]

Invoices have now been sent out for all the current US buyers. Let me know if I made a mistake on any of them.

Ah I see now, but why are some bent like that in the middle, what's the utility in that?

Also, I'm wondering whether to pull the trigger on these to be set in the future when I'll build a Kustom, however what's the advantage of buying in this gb as opposed to from gon for example?

 
I am not too sure about the middle bent stabilizers, so hopefully someone else  can step in for that..

I put up this GB for people's convenience. Try adding a set of a stabilizers to your cart on GON's website. The flat shipping from GON is $25.60, so unless you have a larger order already, it is quite expensive to order just stabilizers alone.

[joey]

I should be putting in an order for these later today!

[Lpwl]

I should be putting in an order for these later today!

No problem !

We are still taking orders until May 1.


It's my turn now.

Invoices have just been sent out for all the current INTERNATIONAL buyers !

For problems or questions, please PM me

[Ouro]

Order submitted 

[suicidal_orange]

Invoice paid

[kacase]

paid and looking forward!

[r0mIe_Ng]

Paid

[joey]

So, the extra 2u option, that is including clips and wire?

[Lpwl]

So, the extra 2u option, that is including clips and wire?

Yeap !

[Cottonsox]

Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

[awhitedev]

Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

Shipping may be reasonable to Australia. I know for us in Murcia it costs more than $30-40 USD to have something shipped from GON.

[ceflame]

Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

What is GONs price for shipping to Australia? Are you logged in with an address set on his site?

[Cottonsox]

Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

Shipping may be reasonable to Australia. I know for us in Murcia it costs more than $30-40 USD to have something shipped from GON.

Have you actually checked for stabs? i know i bought a plate of him and postage was considerably more expensive then it is for stabs. i know it may be still expensive, but i am honestly interested to know. As the difference for a 60% plate to a Bulk bundle of stabs was at least $20 for me, i would have to go back to my invoice to double check.

[Lpwl]

You can do crazy things with GON's website !

Something like this ...



... until logging-in :

[Cottonsox]

Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

[awhitedev]

Mine is still $25.60 shipping for X number of stab sets.

Edit: Shipping goes up $10 or so every 25 sets.

[ceflame]

Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.

[Cottonsox]

Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.

I must have missed that post regarding bulk buying being cheaper and just wanted to highlight for people who were in a similar situation to me.

If anyone is interested the break point when using GON becomes cheaper is when i am roughly spending $60 - $65 (including shipping)

[ceflame]

Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.

I must have missed that post regarding bulk buying being cheaper and just wanted to highlight for people who were in a similar situation to me.

If anyone is interested the break point when using GON becomes cheaper is when i am roughly spending $60 - $65 (including shipping)

Bulk ordering yourself is cheaper for yourself, which is pretty much the reason I started this, because for people just wanting a couple sets can get it cheaper through this buy.

I understand that we're not strictly talking about GON's reliability, but the quantity purchased make it more worthwhile to order for yourself, but here's what I have to say for those thinking of ordering from GON.

I was initially going to do this proxy ordering bulk from GON, but a couple of reasons compelled me to go with Hojin.Yi from Winkeyless instead.

• It is very hard to get into contact with GON sometimes. I asked him about doing a bulk order on one day, and he answered immediately. The next day, I tried to contact him again, to no avail. Leaving him messages on Skype ALWAYS leads to nothing if he is not compelled to respond (left him 4 messages over the course of a month, and he did not reply to me once). On the other hand, emailing Hojin my questions led to a quick and detailed response.
• He has a history of not following up on shipping dates (promising to ship on certain days, but never meeting expectations).
• Neglecting to inform me of information regarding stock of parts leading to 3 month delivery date for a parts order to me.
• GON has also chosen to stop responding to people on GH, stepping away from his own subforum. If you look at his Q&A thread, you can see some examples of what I have detailed above..

Please take my words with a grain of salt. These are my PERSONAL experiences. I have placed two orders with GON, both have had some problems, but in the end he has delivered, just not in an expected timely manner.

edit: Honestly, I do not want to downplay GON's services. This post is also sort of off-topic for this thread, but I felt I had to say something.

[awhitedev]

This and the sticker GB that just opened up seem to have the same thing in common.

It's cheaper if all you want are a few pieces and don't want to pay for shipping around the world. Take it for what it is. Depending on the amount you want and where you live your results may differ. For us in murica... this is a great opportunity to save in shipping cost.

[Cottonsox]

Just going to say one thing in regards to GON and leave it at that.

I have had a few interactions with GON and all went very well. Even when communication was slow. When i locked in my order(s) my order was shipping within a few days.

When your talking about products that do not required his assembly services or moq's to be met, I honestly believe these are shipped in a very timely manner. 

I don't want people to be scared away from his site when it comes to certain products he sells.

[unoab]

For us in murica... this is a great opportunity to save in shipping cost.

More

Well if you are just looking for bulk 2u stabs buying them from an electronics supplier like mouser, which has the cherry 2u stabs for $0.88 at a quantity of 1 and dropping after that, might be cheaper:
Cherry G99-0224

And shipping starts at $4.99

Ceflame, you could possibly order all  extra 2u stabs from mouser to get a cheaper price if you get a number of orders for those.  You could probably save on the shipping from korea too if you could work out just getting the 6.25 stab bars from there and source all the stock parts locally.

Well.... I just did some searches, and you can even get cheaper than mouser (for the 2u stabs), I'll just leave this here for some thought:
Some even cheaper prices..

edit: ignore me I am an idiot and had the wrong part number there, all that is hidden above was for plate mount stabs, PCB mount ones are these
PCB mount 2u stabs

[hjc1710]

ceflame, can I alter my order? I want to drop 2 stabs and get some gold ones from SPRiT now that he's doing wires + plastic parts. I haven't paid my invoice yet.

Whatchu want me do? PM'd to start it.

[swimmingbird]

Down for 2 sets of complete 6.25

[TheOpposition]

I'm glad I saw this, in for 2 sets

[Lastpilot]

Received my invoice, it will be paid Wednesday night. Thank you ceflame!

[joey]

Filled the form!

[awhitedev]

How close to 100 sets are we now?

[ceflame]

How close to 100 sets are we now?

Don't think we will be able make it to 100 sets, unfortunately.

[swimmingbird]

How close to 100 sets are we now?

Don't think we will be able make it to 100 sets, unfortunately.

What's it at?

[ceflame]

I'm currently at 37 sets, not sure what Lpwl is at.

Not sure if Hojin will allow us to get the bulk pricing for our combined order numbers, but if we assume he will, and Lpwl is at similar numbers to me,
then we would still need ~25-35 more sets ordered.

3 more days left.

[Lpwl]

How close to 100 sets are we now?

There is some good news regarding this !

Right now, it's the middle of the night in California but - no worries - ceflame will explain everything in a few hours.

[awhitedev]

How close to 100 sets are we now?

There is some good news regarding this !

Right now, it's the middle of the night in California but - no worries - ceflame will explain everything in a few hours.

#hype! If we're close to the price break it might motivate people to buy more to meet it. Even if it is just a 10% break

[ceflame]

Hojin has offered us the 10% discount regardless of hitting 100 sets or not.

He is offering 10-20% discounts on most options on his site (including pcb/housing) if members are looking to run group buys for parts.

Unfortunately, since we were not fully anticipating reaching the 100 MOQ for 10% price drop, we had already sent out and received invoices from most people who have joined.

Here is what we have decided to do, since it would be a lot of work for me and Lpwl. If you have already joined, we are offering you a partial refund of $0.90 per TKL set or $1.20 per full set (numbers will be so-so in Euro) by request. Just send a PM to me (US buyers) or Lpwl (international buyers). Otherwise, your money will go towards supporting us .

Subsequent buyers (now until the end) will still be paying our original set GB price for consistency. Thanks!

[Lpwl]

Last day to order !

[radio_killah]

Edit. Sent you a pm.

[swimmingbird]

Come on guys you know you want some of these for that project you plan on doing! Get in on it!

[ceflame]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

[missalaire]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

[ceflame]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

[missalaire]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler

[ceflame]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

[Lpwl]

We got dis !

[swimmingbird]

Yay!

[missalaire]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute

[ceflame]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute

No problem!

Just got word that the packages are on their way to us.

[swimmingbird]

Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute

No problem!

Just got word that the packages are on their way to us.

Man that was quick

[quantalume]

I see I missed out on this, but if anyone decides they don't need/want theirs, or if there are any leftovers, please let me know.  I haven't been able to find any that can be delivered to the US for a reasonable price (< $25).  I need a set with a 6.25x spacebar stab.  Thanks.

Edit: Saw that ceflame ordered a couple extra sets.  PM sent.

[Lpwl]

Great news : I received my package from winkeyless.kr this morning !



> I already counted (twice - ehm ... just to be sure haha) and sorted every INTERNATIONAL orders.



This doesn't look much but it kept me busy for several hours 


Everything will be sent out either Wednesday or Friday (note : Ascension Thursday = public holiday).

I will send shipping confirmation with a picture of your package (and tracking number for those concerned).

[suicidal_orange]

Wow, that was fast!  Should be here next week if the O-rings are anything to go by, I'd best get started...

Thanks Lwpl

[Lpwl]

All INTERNATIONAL orders (minus one) were shipped Wednesday.

The last one went out this morning

[cmadrid]

That was quick

[awhitedev]

That was quick

Indeed. I wonder how the US side of things is going?

[onishima]

Ugh, sad I missed this...

[ceflame]

That was quick

Indeed. I wonder how the US side of things is going?

Shipping taking a bit longer than expected

Tracking shows that it has departed Los Angeles USPS facility and is on the way to me.

I'm expecting to be able to ship everything about probably mid-next week.

[ceflame]

Package came in! I'll see if I can get it sorted and shipped out by Monday.

[awhitedev]

Show Image

Package came in! I'll see if I can get it sorted and shipped out by Monday.

Woo! Great news :)

[ceflame]

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

[Flyersfan1]

Thanks so much for your hard work in making this such a quick turnaround guys!

[Sed8op8]

Thanks so much for your hard work in making this such a quick turnaround guys!

^^^^ this!

[ceflame]

No problem guys

By the way.. PM me if you want your tracking number. Otherwise, just expect it to be in your mailbox probably sometime this week.

[awhitedev]

Show Image

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Wow that was quick! As Flyersfan1 said, thank you for your hard work!

I see mine in that pile  :D

[sethk_]

Are you sure that you should be posting pictures with everyone's addresses...

[swimmingbird]

Are you sure that you should be posting pictures with everyone's addresses...

Kind of what I was thinking

[ceflame]

Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users! 

[minh278]

Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users! 

Im going to send you the new dell keyboards with the big-ass spacebars, heh heh heh.

[ceflame]

Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users! 

Im going to send you the new dell keyboards with the big-ass spacebars, heh heh heh.

Bring it on, I'm a recent convert to cup rubber 

[hojin.yi]

Show Image

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.

[Flyersfan1]

Show Image

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.

Thank YOU Hojin for supplying these in the first place! Great GB all around.

[ceflame]

Show Image

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.

Thank YOU Hojin for supplying these in the first place! Great GB all around.

I agree. Hojin is the true person to thank here! Allowing us to run the stabilizer/sticker/pcb group buys for geekhack.

I feel like someone who offers all these things should AT LEAST get a vendor forum *wink* *wink* if any mods are looking!

[joey]

Anyone in the EU received them? Mine was sent 6 days ago..

[suicidal_orange]

Anyone in the EU received them? Mine was sent 6 days ago..

Nope!  But these would have triggered the metal detector in airport security, you know how long that adds to your journey...  O-rings from Lwpl only took 3 days in the same packaging so I'm sure these will arrive sometime this week

[joey]

Anyone in the EU received them? Mine was sent 6 days ago..

Nope!  But these would have triggered the metal detector in airport security, you know how long that adds to your journey...  O-rings from Lwpl only took 3 days in the same packaging so I'm sure these will arrive sometime this week

Ok! Can you let me know when you receive yours!

[suicidal_orange]

Two sets of stabs have arrived safely - thanks again Lwpl

[joey]

Mine arrived today too!

[Lpwl]

That's great news ! 

[r0mIe_Ng]

My package had already arrived safety!

P.s: Sr for late email response

Mod Edit: Removed photo with personal info (addresses)

[swimmingbird]

Got mine today! Thanks guys

[Cods]

Arrived yesterday - thanks mate, nice work.