« previous next »
Pages:  [1] 2 3 4 5 »   Go Down

Author Topic: [IC] - Aerospace grade titanium 60% plates - GB starting shortly!!!!!!!  (Read 37455 times)

0 Members and 1 Guest are viewing this topic.

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
[IC] - Aerospace grade titanium 60% plates - GB starting shortly!!!!!!!
« on: Thu, 02 January 2014, 17:48:58 »
So in collaboration with mkawa, I'll have access to some 14 gauge/.08" CP4 grade (aerospace grade) titanium. That means some custom 60% sized plates out of TITANIUM. I'm thinking any layout you want (if jdcarpe doesn't mind helping me with design, I have quite a few designs already) with the caveat that you don't mine paying for the programming fee.


Not sure on pricing or time frame but still let me know if you're interested. I think we'll have to order in quantities of 12 due to the sheet size that mkawa can get


Also, switch tools......

Laser guy got back to me, he can only fit 8-9 plates per kawa sheet. He did also get back to me with a cutting fee with material provided. The final cost of the plate is looking to be around $75 + shipping to you. As for tools, it depends on how many he can fit onto the remaining scrap metal (no cutting fee quoted)


Here's a list of those interested:
- riotonthebay
- Tarzan
- Latin00032
- fart_toast
- ethankz750
- joneslee85
- Proc31
- heedpantsnow
- danielucf
- n0rvig
- moogle
- billnye29
- snoopy
- aggiejy

« Last Edit: Tue, 18 February 2014, 00:09:55 by The_Beast »
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #1 on: Thu, 02 January 2014, 17:51:06 »
Tentatively interested pending pricing information and changing future circumstances, etc. :)
Logged

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #2 on: Thu, 02 January 2014, 17:54:34 »
I'm in for a 60 percent hhkb type plate.
Logged

Offline Dubsgalore

  • Banned
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #3 on: Thu, 02 January 2014, 17:55:17 »
Quote from: riotonthebay on Thu, 02 January 2014, 17:51:06
Tentatively interested pending pricing information and changing future circumstances, etc. :)

me too, would go for an Ansi 1.5 plate
Logged

Offline JaccoW

  • Fire Typer!!
  • * Elevated Elder
  • Posts: 2003
  • Keyboard is Lava!
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #4 on: Thu, 02 January 2014, 17:58:21 »
Plate for a FC660M?

Might be interested and at the very least for a switch tool.
Logged
|||Daily driver: Duck Orion TKL
|||My other keyboards :
More
|||The Original|Home|Work|Numpad|Play|Endgame|Keycaps
x
|Déck Legend Frost|Keycool 87 LE|Leopold FC660M|FC 210TP|Raptor K1 Gaming|Duck Orion TKL|My keycaps & sets
|Pics|Pics|Pics|Pics|Pics|Pics

|||Want to know what Keycap stores there are? Check out my Keyboard Pearltree and my (FS/FT/WTB) thread

Offline regack

  • Posts: 660
  • Location: Thessia
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #5 on: Thu, 02 January 2014, 18:00:28 »
I like this idea, just have to figure out what plate I would want...
Logged

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #6 on: Thu, 02 January 2014, 18:04:34 »
Make me an hhkb style that fits omron switches. Me love you long time.
Logged

Offline TheSoulhunter

  • Posts: 1169
  • Location: Euroland
  • Thorpelicious!
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #7 on: Thu, 02 January 2014, 18:24:01 »
2x Poker layout but with split backspace please!
Logged

Offline metalliqaz

  • * Maker
  • Posts: 4951
  • Location: the Making Stuff subforum
  • Leopold fanboy
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #8 on: Thu, 02 January 2014, 18:38:39 »
Only 60%?
Logged

Offline JonasDK

  • Posts: 141
  • Location: Denmark
  • Let me poo on you
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #9 on: Thu, 02 January 2014, 19:56:15 »
Quote from: The_Beast on Thu, 02 January 2014, 17:48:58
Also, switch tools......

My body is ready
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #10 on: Thu, 02 January 2014, 19:57:43 »
titanium switch tools :eek:
Logged

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #11 on: Thu, 02 January 2014, 20:21:37 »
Quote from: SpAmRaY on Thu, 02 January 2014, 19:57:43
titanium switch tools :eek:

I missed that the first time I read the OP. Yissssss!
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #12 on: Thu, 02 January 2014, 20:23:26 »
Hell yeah. I'm in for some switch tools and a HHKB style plate.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1304
  • Location: US: Virginia
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #13 on: Thu, 02 January 2014, 20:48:01 »
I'm interested in a "Universal 10x Spacebar" plate for a GH60.
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #14 on: Thu, 02 January 2014, 20:57:28 »
Quote from: Dubsgalore on Thu, 02 January 2014, 17:55:17
me too, would go for an Ansi 1.5 plate

Quote from: riotonthebay on Thu, 02 January 2014, 17:51:06
Tentatively interested pending pricing information and changing future circumstances, etc. :)

Quote from: regack on Thu, 02 January 2014, 18:00:28
I like this idea, just have to figure out what plate I would want...

Quote from: Latin00032 on Thu, 02 January 2014, 17:54:34
I'm in for a 60 percent hhkb type plate.

Quote from: bueller on Thu, 02 January 2014, 20:23:26
Hell yeah. I'm in for some switch tools and a HHKB style plate.

Quote from: Tarzan on Thu, 02 January 2014, 20:48:01
I'm interested in a "Universal 10x Spacebar" plate for a GH60.

Quote from: TheSoulhunter on Thu, 02 January 2014, 18:24:01
2x Poker layout but with split backspace please!


Interest noted, you'll be first in line. The first 12 plates cut are kind of a prototype because my guy CAN cut Ti, but he hasn't before. So the first plate cut will be mine to calibrate settings, but I can't guarantee them turning out perfectly



Quote from: Halverson on Thu, 02 January 2014, 18:04:34
Make me an hhkb style that fits omron switches. Me love you long time.

omron switches? Do they have a special cutout?


Quote from: JaccoW on Thu, 02 January 2014, 17:58:21
Plate for a FC660M?

Might be interested and at the very least for a switch tool.

I don't have any drawings for a 660M plate


Quote from: metalliqaz on Thu, 02 January 2014, 18:38:39
Only 60%?

Right now, 60% nest on the plate perfectly. TKLs could be done, but they don't nest nearly as well
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #15 on: Thu, 02 January 2014, 21:47:04 »
Yea omrons are stupid....more close to mx cutouts than alps.
Logged

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2943
  • Location: Carolina Beach, NC
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #16 on: Thu, 02 January 2014, 21:56:45 »
In for switch tool  :thumb:
Logged

Offline Vintage

  • Posts: 460
  • Location: United States
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #17 on: Thu, 02 January 2014, 22:06:58 »
Interested pending on price. What type of finish would it have? Just the unfinished machined look or something else?
Logged
CM QFR w/ MX Reds  | Logitech G900

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #18 on: Thu, 02 January 2014, 22:37:40 »
in for a switch tool cuz my R1 one from john has extra metal on the inside thats annoying me
Logged

Offline Jrwestcoast

  • Posts: 52
  • Location: California
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #19 on: Thu, 02 January 2014, 23:37:38 »

Hell yeah. I'm in for some Ti switch tools and a plate but can't decide which one.
Logged

Offline jorgenslee

  • Posts: 369
  • Location: Philippines
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #20 on: Thu, 02 January 2014, 23:39:07 »
In for a switch tool.
Logged

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #21 on: Fri, 03 January 2014, 00:16:47 »
Quote from: Vintage on Thu, 02 January 2014, 22:06:58
Interested pending on price. What type of finish would it have? Just the unfinished machined look or something else?
it will get somewhere between a 36 and 40-ish mil finish. think stainless steel 4B. not polished down to a shine, but a little matte.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline swill

  • * Elevated Elder
  • Posts: 3365
  • Location: Canada eh
  • builder & enabler
    • swillkb.com
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #22 on: Fri, 03 January 2014, 00:19:41 »

Quote from: Pacifist on Thu, 02 January 2014, 22:37:40
in for a switch tool cuz my R1 one from john has extra metal on the inside thats annoying me

Something a file can't take care of?
Logged

Offline swill

  • * Elevated Elder
  • Posts: 3365
  • Location: Canada eh
  • builder & enabler
    • swillkb.com
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #23 on: Fri, 03 January 2014, 00:22:37 »
What properties does Ti have over stainless steel which make it better for plates?  I could be interested once we get an idea on price.
Logged

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #24 on: Fri, 03 January 2014, 00:36:29 »
titanium is as strong as stainless steel but weighs about 1/10 as much, roughly. stainless steel refers to a huge number of alloys, whereas titanium is generally judged on purity, (CP grades). this is CP material, and not an alloy such as 16av. as such, this material offers many of the benefits of very low carbon martensitic stainless with a fraction of the weight and about 10-15% more dimensional stability.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline dragonxx21

  • Posts: 471
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #25 on: Fri, 03 January 2014, 00:50:49 »
SWITCH TOOLS PLSSSSSSSS. No seriously. I need these switch tools.
Logged
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline raphdu57

  • Posts: 14
  • Location: Switzerland
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #26 on: Fri, 03 January 2014, 01:35:52 »
I may be interested in a universal iso plate (same as offered in gh60 gb) and a switch tool.
It all depends on price and shipping to me!
Logged
QFR with MX brown

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #27 on: Fri, 03 January 2014, 01:40:09 »
Quote from: swill on Fri, 03 January 2014, 00:19:41

Quote from: Pacifist on Thu, 02 January 2014, 22:37:40
in for a switch tool cuz my R1 one from john has extra metal on the inside thats annoying me

Something a file can't take care of?

Too lazy tbh
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #28 on: Fri, 03 January 2014, 01:56:44 »
If these plates allow switch top removal I'll bump my order to 2 plates. Not fussed if it costs more, I've got two plates here already but they're just universal plates and I know I'll wind up wanting to change springs or stems some time in the future.
« Last Edit: Fri, 03 January 2014, 01:58:21 by bueller »
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #29 on: Fri, 03 January 2014, 02:18:04 »
also re: finish, titanium has fantastic bulk material properties and low weight but doesn't have a ton of surface hardness, so you can really finish the sheet however you want to with pretty basic tools. part of my mockup for the project this material is for involves a brushed and wetsanded CP grade 2 plate that i've been trying to get mostly flat for conductivity experiments. i can take some pictures tomorrow if there's interest. titan has a pretty unique look to it for metallurgic  reasons i don't understand in the least.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #30 on: Fri, 03 January 2014, 02:19:52 »
Quote from: mkawa on Fri, 03 January 2014, 02:18:04
also re: finish, titanium has fantastic bulk material properties and low weight but doesn't have a ton of surface hardness, so you can really finish the sheet however you want to with pretty basic tools. part of my mockup for the project this material is for involves a brushed and wetsanded CP grade 2 plate that i've been trying to get mostly flat for conductivity experiments. i can take some pictures tomorrow if there's interest. titan has a pretty unique look to it for metallurgic  reasons i don't understand in the least.

Yeah pics would be awesome! I love the look of titanium, as soon as I saw the IC I knew I was in regardless of what was on offer.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #31 on: Fri, 03 January 2014, 02:32:58 »
Will these plates have switch top removal?
Logged

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #32 on: Fri, 03 January 2014, 02:36:47 »
Definitely in for switch tool...
Logged
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline naokira

  • Posts: 409
  • Location: Laguna, Philippines
  • The King in the North
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #33 on: Fri, 03 January 2014, 03:27:52 »
Just go for universal ANSI and universal ISO :)
Logged
FaceW in LZ-CE

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #34 on: Fri, 03 January 2014, 04:32:32 »
In for switch tool.
Logged

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #35 on: Fri, 03 January 2014, 05:01:17 »
In for a pair of tool & maybe a plate. :D depending on the price n
Logged
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline fart_toast

  • Posts: 103
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #36 on: Fri, 03 January 2014, 06:51:50 »
Interested depending on price. ISO Poker 2 plate. Possibly an ISO TLK too if it is confirmed that it will fit on the raw sheet.
Logged

Offline regack

  • Posts: 660
  • Location: Thessia
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #37 on: Fri, 03 January 2014, 07:11:21 »
Quote from: mkawa on Fri, 03 January 2014, 02:18:04
... take some pictures tomorrow if there's interest...

If you would please... thanks in advance!

Logged

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #38 on: Fri, 03 January 2014, 08:32:04 »
Quote from: Pacifist on Thu, 02 January 2014, 22:37:40
in for a switch tool cuz my R1 one from john has extra metal on the inside thats annoying me

I'm in for a set of switch tools since I lost mine (or Bob ate them...) :'(
Logged

Offline osi

  • Posts: 964
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #39 on: Fri, 03 January 2014, 08:36:39 »
In for a pair of switch tools.

Also interested in a plate with the HHKB layout.
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #40 on: Fri, 03 January 2014, 09:09:50 »
When everyone says they want a plate with HHKB layout do you guys mean the original HHKB layout (6x) or a modified one making use of 7x space bar?
« Last Edit: Fri, 03 January 2014, 09:18:39 by SpAmRaY »
Logged

Offline osi

  • Posts: 964
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #41 on: Fri, 03 January 2014, 09:16:41 »
Quote from: SpAmRaY on Fri, 03 January 2014, 09:09:50
When everyone says they want a plate with HHKB layout do you guys mean the original HHKB layout or a modified one making use of 7x space bar?

Original layout for me
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #42 on: Fri, 03 January 2014, 09:17:53 »
Depends what's on offer I guess, I'd be happiest with a 6.25 spacebar.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline JayKthnx

  • Posts: 146
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #43 on: Fri, 03 January 2014, 09:18:13 »
I would love to see one of these cases made with k70 aesthetics. I think a 60% would look fantastic with little to no lip above the plate.
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #44 on: Fri, 03 January 2014, 09:19:03 »
Quote from: bueller on Fri, 03 January 2014, 09:17:53
Depends what's on offer I guess, I'd be happiest with a 6.25 spacebar.

Well the original HHKB is 6x not 6.25x not sure how exactly that works out...
Logged

Offline osi

  • Posts: 964
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #45 on: Fri, 03 January 2014, 09:48:41 »
Quote from: SpAmRaY on Fri, 03 January 2014, 09:19:03
Quote from: bueller on Fri, 03 January 2014, 09:17:53
Depends what's on offer I guess, I'd be happiest with a 6.25 spacebar.

Well the original HHKB is 6x not 6.25x not sure how exactly that works out...

Interesting -- thought they were 6.25x as well. Adjusting my previous repsonse to HHKB with 6.25x spacebar.

Thanks Spam!
Logged

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #46 on: Fri, 03 January 2014, 09:52:52 »
Reading through this, I think I'd be up for a HHKB plate with a short shift and 6.25x spacebar.
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #47 on: Fri, 03 January 2014, 09:59:43 »
Quote from: SpAmRaY on Fri, 03 January 2014, 09:19:03
Quote from: bueller on Fri, 03 January 2014, 09:17:53
Depends what's on offer I guess, I'd be happiest with a 6.25 spacebar.

Well the original HHKB is 6x not 6.25x not sure how exactly that works out...

Yeah that's going to be a ***** to find spacebars in 6x though.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #48 on: Fri, 03 January 2014, 10:11:07 »
Quote from: bueller on Fri, 03 January 2014, 09:59:43
Quote from: SpAmRaY on Fri, 03 January 2014, 09:19:03
Quote from: bueller on Fri, 03 January 2014, 09:17:53
Depends what's on offer I guess, I'd be happiest with a 6.25 spacebar.

Well the original HHKB is 6x not 6.25x not sure how exactly that works out...

Yeah that's going to be a ***** to find spacebars in 6x though.

exactly
Logged

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #49 on: Fri, 03 January 2014, 10:54:10 »
This all sounds great, but it also sounds monumentally expensive.
Logged
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90
Pages:  [1] 2 3 4 5 »   Go Up
« previous next »