geekhack
geekhack Marketplace => Interest Checks => Topic started by: Nixytheria on Mon, 20 July 2020, 13:45:55
-
(https://media.discordapp.net/attachments/716893432324423731/734826387940311040/OXALYS80_TITLE.png?width=902&height=677)
After finishing OXALYS80 first round and the extended round. I'm thinking that to release some new versions of OXALYS80.
And OXALYS80 will still in a limited number.
Join nix studio Discord (https://discord.gg/ZxM9BYw)
Visit nix studio Instagram (https://www.instagram.com/nix.studio/)
There are 3 editions that I want to release.
Snow White
- E-White finish 6xxx Aluminum case
- Chrome PVD Polished SS Weight
- Polycarbonate Plate
(https://media.discordapp.net/attachments/610537651069779988/741878271091671050/RENDER_15.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741878272715128904/RENDER_16.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741878275470786600/RENDER_22.jpg?width=720&height=540)
Polycarbonate
- Smoke Black Polycarbonate case
- Black PVD Polished SS Weight
- Polycarbonate Plate
(https://media.discordapp.net/attachments/610537651069779988/741878256713597028/RENDER_14.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741878263886118972/RENDER_18.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741878272530317424/RENDER_21.jpg?width=720&height=540)
Stealth Black
- Black Anodized 6xxx Aluminum case
- Black PVD Polished SS Weight
- Polycarbonate Plate
(https://media.discordapp.net/attachments/610537651069779988/741878135875960873/RENDER_13.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741878255950495854/RENDER_17.jpg?width=720&height=540)(https://media.discordapp.net/attachments/610537651069779988/741881903531032676/RENDER_20.jpg?width=720&height=540)
Specifications
- Winkeyless TKL
- 8 Degree Typing Angle
- 7 Screws Top Mount
- Polycarbonate Plate
- QMK/VIA compatible PCB
Pricing & Quantity Information
- Price: $800
- Quantity Information: 10 units per edition by "Raffle"
FAQ
Q: Why the Price is really expensive?
A: It's hard to get cheap price when you are going in small number. Especially for the PVD SS.
Q: Is there any other plate material for extra?
A: I there would be alu and brass for additional. BUT we will share the plate files at the End.
Q: Can i take more than 1 Board?
A: Please be consider if you are submitting every color and win 2 of them you can't cancel the other 1.
Q: ISO Support?
A: Yes for sure!
Q: What PCB?
A: We are developing some TKL PCB that has FLEX cutout on the alpha.
Q: Extra Plate and PCB ?
A: There will be additional Plate and PCB
Q: Extras?
A: We are going to order more than requested number to keep this product in A Stock Condition. So there would be an Extra! [Extra will be raffle too]
RAFFLE DATE ESTIMATED: 14 AUGUST 2020 09:00.PM EDT
Timeline: Estimated for 3 months to shipping day.
Typing Test
Disclaimer
We are not going with Salvun for this project since he is very busy to handle small number boards
Google Form
https://docs.google.com/forms/d/1HS44RRhU3NWuJNVX9bKwepJU1SD4EW_Xp0OVrPoI3fw/ (https://docs.google.com/forms/d/1HS44RRhU3NWuJNVX9bKwepJU1SD4EW_Xp0OVrPoI3fw/)
Signature
Support us by using our complimentary banner!
[url=https://geekhack.org/index.php?topic=107600.0][img width=300 height=120]https://media.discordapp.net/attachments/653024043116658728/734841473891172442/OXALYS80_Limited_Edition_Label.png?width=1442&height=577[/img][/url]
-
Updates
- Just get some quote from the factory
- There's a change for the Polycarbonate edition. will be posted later.
-
.
-
Awww yis. Looking good!
-
I'll take it!
-
:thumb: :thumb: :thumb:
-
this looks so clean
-
I look forward to losing this raffle
-
will this have hotswap PCB? is there an estimated time for the raffle? I just don't want to miss out!
-
Coloured PC is difficult to do right. If you can manage it then the smoked PC would be superb. Interested also to loose this raffle later on.
-
Epic as always friend
-
Looks absolutely amazing!
-
Epic as always friend
Thankyou my friend!
Coloured PC is difficult to do right. If you can manage it then the smoked PC would be superb. Interested also to loose this raffle later on.
I will love to see that. But for now, it will going in Just Polycarbonate :thumb: thankyou for your reply.
Looks absolutely amazing!
I see you here friend! ;)
will this have hotswap PCB? is there an estimated time for the raffle? I just don't want to miss out!
Since this only comes in WKL version. I'm planning for it!
-
moneys tight
-
Lul @ price. I'd understand for the SS weight version at 10 units but not for brass and polycarb
Sent from my GM1915 using Tapatalk
-
MEH. I sure hope the screws don't come like that in the finished product.
-
Didn't catch the previous round, but I might actually try getting in on this one, because the unique bezels, especially on the side profile, are really hard to resist.
If I'd actually be able to get a e-white one, I'd still prefer other plate materials.
So because of that I was wondering if you have any plans on releasing the plate files afterwards, so people can let their own ones get cut, or maybe even offer other plate materials right from the get go?
-
Lul @ price. I'd understand for the SS weight version at 10 units but not for brass and polycarb
Sent from my GM1915 using Tapatalk
Polycarbonate usually harder to machined than Aluminum.
MEH. I sure hope the screws don't come like that in the finished product.
Is there any other Screw that you mean?
Didn't catch the previous round, but I might actually try getting in on this one, because the unique bezels, especially on the side profile, are really hard to resist.
If I'd actually be able to get a e-white one, I'd still prefer other plate materials.
So because of that I was wondering if you have any plans on releasing the plate files afterwards, so people can let their own ones get cut, or maybe even offer other plate materials right from the get go?
Hello, Until for now, I'm choosing Polycarbonate Plate. because it has better taste for this plate mount. Otherwise, I will share the plate file for people that want get other material.
Thankyou.
-
There's a change on the Polycarbonate Version.
- Will be using Smoky/Black Polycarbonate
- Black PVD SS
And factory told me that SS will be easier and better for PVD finish. So all of these version will be using SS Weight !
-
Black polycarb with black pvd SS. Sounds nice AF
-
Now we are talking.
-
There's a change on the Polycarbonate Version.
- Will be using Smoky/Black Polycarbonate
- Black PVD SS
Oh baby!
-
Just want to clarify that for some of people tha misunderstanding. This is an IC Form. Not the Raffle Form.
Raffle Form will start to be collected at August when it is started. :thumb:
-
Will there be the option for fixed ISO plates?
-
Wow looks so clean
-
VERY interested in this unit :thumb:
Consider me in for the running.
-
Also, there is a required suggestion response, what would we be putting down? :/
-
Also, there is a required suggestion response, what would we be putting down? :/
Nevermind, found out from updates that the form is an IC form. Submitted mine :D
-
Will there be the option for fixed ISO plates?
No, but i will share the Plate file and you can Modify it
-
Renders Update and Raffle Date Announced
-
Omg so nice! :-*
-
This pleases my eyeballs
-
Did the raffle happen yet?
-
Raffle was weeks ago