Author Topic: QuantBox 12x5 artisan case (Read 11396 times)

Quantastrophus · « **on:** Thu, 13 December 2018, 10:57:13 »

Hi all,

Resin container. Lid is polycarbonate and case is Anodized Aluminum.

Flip Test

Estimated pricing:

Quantity 50: $120
Quantity 100: $100

Colors

Black
Silver
Mystery Color #1
Mystery Color #2

Size is 12x5 which means it holds 60 fine resin doods and the measurement is about 12inx5x5in.

There are also screw holes in the butt to allow for mounting legs at some point to prop it up at ~30 degree angle.

The top and bottom are held together by the finest magnet technology.

Please comment.

dgneo · « **Reply #1 on:** Thu, 13 December 2018, 10:58:59 »

comment

clasicks · « **Reply #2 on:** Thu, 13 December 2018, 10:59:08 »

Quote from: Quantastrophus on Thu, 13 December 2018, 10:57:13

Hi all,

Resin container. Lid is polycarbonate and case is Anodized Aluminum.

Show Image

Estimated pricing:
Quantity 50: $120
Quantity 100: $100

Size is 12x5 which means it holds 60 fine resin doods and the measurement is about 12inx5x5in.

There are also screw holes in the butt to allow for mounting legs at some point to prop it up at ~30 degree angle.

The top and bottom are held together by the finest magnet technology.

Please comment.

Nice

fishinaspacesuit · « **Reply #3 on:** Thu, 13 December 2018, 10:59:44 »

YES! I am in for one QTY 100!

Looking forward to the Group buy!

badchad · « **Reply #4 on:** Thu, 13 December 2018, 11:00:19 »

I'll take one fanks

Sent from my iPhone using Tapatalk

neojonathan · « **Reply #5 on:** Thu, 13 December 2018, 11:00:22 »

This is the perfect case for my collection !!! I'm already ready !!!

zap2oz · « **Reply #6 on:** Thu, 13 December 2018, 11:00:46 »

I'm definitely in for one. Are there going to be multiple colors?

bthezebra · « **Reply #7 on:** Thu, 13 December 2018, 11:01:38 »

Vury nice

romevi · « **Reply #8 on:** Thu, 13 December 2018, 11:01:42 »

You spelled it wrong.

repuls0r · « **Reply #9 on:** Thu, 13 December 2018, 11:02:02 »

Count me in

clasicks · « **Reply #10 on:** Thu, 13 December 2018, 11:02:33 »

Quote from: romevi on Thu, 13 December 2018, 11:01:42

You spelled it wrong.

1 too many a's in the name

afrokobe · « **Reply #11 on:** Thu, 13 December 2018, 11:02:46 »

more magnets pls

RyuDragoon · « **Reply #12 on:** Thu, 13 December 2018, 11:02:53 »

Give black one please.

Mousy · « **Reply #13 on:** Thu, 13 December 2018, 11:02:59 »

How strong are the magnets? I get if you shake it then it will fall off but can you hold it upside down?

yasintahir · « **Reply #14 on:** Thu, 13 December 2018, 11:03:02 »

where's the form?

gasp · « **Reply #15 on:** Thu, 13 December 2018, 11:03:05 »

Hehe it looks like a baking tray. I love it! I'll be in for one!

Sent from my Pixel XL using Tapatalk

eyedrop · « **Reply #16 on:** Thu, 13 December 2018, 11:03:51 »

Lovely!

hayt · « **Reply #17 on:** Thu, 13 December 2018, 11:04:12 »

+1 on this design, looks great bud sick magnets too

badchad · « **Reply #18 on:** Thu, 13 December 2018, 11:04:47 »

Quote from: hayt on Thu, 13 December 2018, 11:04:12

+1 on this design, looks great bud sick magnets too

How do they work?

Sent from my iPhone using Tapatalk

iamtootallforthis · « **Reply #19 on:** Thu, 13 December 2018, 11:05:28 »

Interested for sure

txclack · « **Reply #20 on:** Thu, 13 December 2018, 11:05:50 »

I am attracted to those magnets

Waateva · « **Reply #21 on:** Thu, 13 December 2018, 11:10:51 »

Can someone explain to me how the magnets work?

gasp · « **Reply #22 on:** Thu, 13 December 2018, 11:13:34 »

Quote from: Waateva on Thu, 13 December 2018, 11:10:51

Can someone explain to me how the magnets work?

Magnet holds lid to cookie sheet. Keeps artisans safe.

Sent from my Pixel XL using Tapatalk

romevi · « **Reply #23 on:** Thu, 13 December 2018, 11:14:30 »

Quote from: Waateva on Thu, 13 December 2018, 11:10:51

Can someone explain to me how the magnets work?

F**kin' magnets.

How do they work?

kconfire · « **Reply #24 on:** Thu, 13 December 2018, 11:15:05 »

Comment

jackedhardwarejunkie · « **Reply #25 on:** Thu, 13 December 2018, 11:15:25 »

Ooof finally! I'm in 100%

Hodgeman · « **Reply #26 on:** Thu, 13 December 2018, 11:23:23 »

Quantastrophus · « **Reply #27 on:** Thu, 13 December 2018, 11:27:22 »

Quote from: Mousy on Thu, 13 December 2018, 11:02:59

How strong are the magnets? I get if you shake it then it will fall off but can you hold it upside down?

Added video to OP

hayt · « **Reply #28 on:** Thu, 13 December 2018, 11:42:30 »

Quote from: afrokobe on Thu, 13 December 2018, 11:02:46

more magnets pls

screw u

gasp · « **Reply #29 on:** Thu, 13 December 2018, 11:43:01 »

Quote from: hayt on Thu, 13 December 2018, 11:42:30

Quote from: afrokobe on Thu, 13 December 2018, 11:02:46
more magnets pls

screw u

Rip

Sent from my Pixel XL using Tapatalk

BestShuckleNA · « **Reply #30 on:** Thu, 13 December 2018, 11:47:25 »

Yo that's awesome and I need to cop one this time since I missed hayts

Sent from my Pixel 2 using Tapatalk

nickheller · « **Reply #31 on:** Thu, 13 December 2018, 11:56:44 »

This is dope, I would prefer the bottom in poly vs alu, but likely interested either way.

sleepy · « **Reply #32 on:** Thu, 13 December 2018, 11:58:52 »

Looks great, excited to hear more

LightningXI · « **Reply #33 on:** Thu, 13 December 2018, 12:16:48 »

Quote from: nickheller on Thu, 13 December 2018, 11:56:44

This is dope, I would prefer the bottom in poly vs alu, but likely interested either way.

+1 for poly bottom

yuppie · « **Reply #34 on:** Thu, 13 December 2018, 13:47:19 »

BobCarltheThird · « **Reply #35 on:** Thu, 13 December 2018, 17:34:03 »

:monkaS:

Taeha Types · « **Reply #36 on:** Thu, 13 December 2018, 19:01:03 »

I need this and more flip tests

jackedhardwarejunkie · « **Reply #37 on:** Thu, 13 December 2018, 19:04:53 »

Quote from: LightningXI on Thu, 13 December 2018, 12:16:48

Quote from: nickheller on Thu, 13 December 2018, 11:56:44
This is dope, I would prefer the bottom in poly vs alu, but likely interested either way.
+1 for poly bottom

+2

Also can you make a video taking the lid off/putting on pls =)

zekkin · « **Reply #38 on:** Thu, 13 December 2018, 19:37:59 »

Wait a second...this isn't a keyboard...

Sent from my Pixel 2 XL using Tapatalk

The_judge_168 · « **Reply #39 on:** Thu, 13 December 2018, 19:54:49 »

Looks great! Interested in one, hoping green makes it as a mystery color

Idragonist · « **Reply #40 on:** Thu, 13 December 2018, 19:57:14 »

Can you make the legs manegtised as well, love to see no screws.

LightningXI · « **Reply #41 on:** Thu, 13 December 2018, 19:59:07 »

+1 flip and shake, shake, shake

romeo · « **Reply #42 on:** Fri, 14 December 2018, 04:08:05 »

could we add switches inside, all you need is a good plate and then people could just mount the switches in, and then the artisan.

Mousy · « **Reply #43 on:** Fri, 14 December 2018, 04:27:31 »

Quote from: Quantastrophus on Thu, 13 December 2018, 11:27:22

Quote from: Mousy on Thu, 13 December 2018, 11:02:59
How strong are the magnets? I get if you shake it then it will fall off but can you hold it upside down?

Added video to OP

Awesome thank you

meiosis · « **Reply #44 on:** Fri, 14 December 2018, 04:54:13 »

PaultheSloth · « **Reply #45 on:** Fri, 14 December 2018, 05:19:48 »

Quant box. Count me in @ 100 MOQ

hayt · « **Reply #46 on:** Fri, 14 December 2018, 05:52:57 »

Quote from: romeo on Fri, 14 December 2018, 04:08:05

could we add switches inside, all you need is a good plate and then people could just mount the switches in, and then the artisan.

Might as well add a pcb too

Zixpk · « **Reply #47 on:** Fri, 14 December 2018, 08:56:21 »

Cool, would be interested!

nickheller · « **Reply #48 on:** Fri, 14 December 2018, 09:07:42 »

Quote from: hayt on Fri, 14 December 2018, 05:52:57

Quote from: romeo on Fri, 14 December 2018, 04:08:05
could we add switches inside, all you need is a good plate and then people could just mount the switches in, and then the artisan.

Might as well add a pcb too

Can you add bluetooth so I can control my pc with it?

hayt · « **Reply #49 on:** Fri, 14 December 2018, 09:27:49 »

Quote from: nickheller on Fri, 14 December 2018, 09:07:42

Quote from: hayt on Fri, 14 December 2018, 05:52:57
Quote from: romeo on Fri, 14 December 2018, 04:08:05
could we add switches inside, all you need is a good plate and then people could just mount the switches in, and then the artisan.

Might as well add a pcb too
Can you add bluetooth so I can control my pc with it?

Don't forget LEDs

LightningXI · « **Reply #50 on:** Fri, 14 December 2018, 10:14:36 »

Quote from: hayt on Fri, 14 December 2018, 09:27:49

Quote from: nickheller on Fri, 14 December 2018, 09:07:42
Quote from: hayt on Fri, 14 December 2018, 05:52:57
Quote from: romeo on Fri, 14 December 2018, 04:08:05
could we add switches inside, all you need is a good plate and then people could just mount the switches in, and then the artisan.

Might as well add a pcb too
Can you add bluetooth so I can control my pc with it?

Don't forget LEDs

if they're not in-switch RGB, I'll be mad

RETURNISO · « **Reply #51 on:** Fri, 14 December 2018, 12:04:15 »

Would love to see a 1x1 size as well even though it would have less space. (Better for the wallet)

Sry if its off topic

Can I put in the oven to bake a waffle effect cake

The grills would be perfect to fill with chocolate for a enhanced chocolate topping

wowremy · « **Reply #52 on:** Fri, 14 December 2018, 18:18:56 »

Flip test is funny.. But isnt the point to show how secure the artisans are? The case could be a little shorter to prevent the caps from turning over maybe?

LightningXI · « **Reply #53 on:** Fri, 14 December 2018, 19:16:46 »

Quote from: wowremy on Fri, 14 December 2018, 18:18:56

Flip test is funny.. But isnt the point to show how secure the artisans are? The case could be a little shorter to prevent the caps from turning over maybe?

There's other artisans that sit taller, such as BS keys (Wrapped, Clacks, etc), Cosmonauts, Kosmonavts, Bruces, some of Krytone's sculpts, old Binge keys, etc.

I think it's appropriate for there to be accommodating space for such keys

Coreda · « **Reply #54 on:** Fri, 14 December 2018, 19:20:39 »

This is a rather sleek design. Nice too that it's switch type agnostic and incorporates a dust cover.

Not an expression of personal interest to buy btw (I don't even own any artisans) just wanted to comment on the nice design.

tskiller · « **Reply #55 on:** Sat, 15 December 2018, 22:11:57 »

Def interested. Artisan storage and display is something that needs more options like this!

Eldr1tch · « **Reply #56 on:** Sun, 16 December 2018, 08:45:08 »

I'm down.

9999hp · « **Reply #57 on:** Sun, 16 December 2018, 09:08:34 »

This looks great; check me as interested

txclack · « **Reply #58 on:** Sun, 16 December 2018, 12:43:20 »

Definitely in for at least 1. Flip test was a success. Magnets work, but how?

Eric404atx · « **Reply #59 on:** Mon, 17 December 2018, 19:53:34 »

floatingskull · « **Reply #60 on:** Tue, 18 December 2018, 07:38:02 »

In for one!

Retrospects · « **Reply #61 on:** Tue, 18 December 2018, 08:50:51 »

Sign me up!

RamenTechMech · « **Reply #62 on:** Sat, 05 January 2019, 01:35:20 »

Is this case still in the works?

Eric404atx · « **Reply #63 on:** Wed, 20 February 2019, 19:29:00 »

Any update?

bunanapeel · « **Reply #64 on:** Wed, 27 February 2019, 20:48:22 »

Ignore this post lol idk how to delete

kokugatsu · « **Reply #65 on:** Tue, 29 October 2019, 10:43:05 »

Fairly interested in this, any chance of this hitting GB?

Kawsur · « **Reply #66 on:** Tue, 29 October 2019, 11:00:21 »

Definitely in for 1.

Quantastrophus · « **Reply #67 on:** Tue, 29 October 2019, 11:27:32 »

what is dead may never die

Zhu96 · « **Reply #68 on:** Tue, 29 October 2019, 14:43:18 »

Definitely in, where can we find more updates?

switchnollie · « **Reply #69 on:** Tue, 29 October 2019, 22:56:44 »

Quote from: Zhu96 on Tue, 29 October 2019, 14:43:18

Definitely in, where can we find more updates?

Probably here when they're ready to update more.

Would like to see where this is going as well since there's not really any other case to get.

xchangmanx · « **Reply #70 on:** Wed, 30 October 2019, 19:21:26 »

I don't own a case. I would like this to be my first. Count me in.

kokugatsu · « **Reply #71 on:** Thu, 31 October 2019, 10:07:27 »

We will watch your career with great interest

Digitize · « **Reply #72 on:** Wed, 06 November 2019, 06:20:56 »

Nice. Interested.

Getting this case is like an incentive to go down the deep rabbit hole of artisans. I’m not there yet but boi does this case want me to do that.

Only have a few artisans.

Sent from my iPhone using Tapatalk

dgneo · « **Reply #73 on:** Wed, 06 November 2019, 08:24:37 »

I'd *think twice before joining a Quantrik GB.

https://www.reddit.com/r/mechmarket/comments/dpgrdg/ustx_h_kyuu_red_or_silver_w_trades_75_or_tkl/f5vu32f/

TypicalOranges · « **Reply #74 on:** Wed, 06 November 2019, 08:29:10 »

Quote from: dgneo on Wed, 06 November 2019, 08:24:37

Show Image

I'd exercise caution before joining a Quantrik GB.

https://www.reddit.com/r/mechmarket/comments/dpgrdg/ustx_h_kyuu_red_or_silver_w_trades_75_or_tkl/f5vu32f/

He is currently banned from Mechmarket (the largest buy/sell/trade board in Mechanical Keyboards) until he makes right; I'd not only exercise caution, but I would straight up *not* join a GB he's putting on until he has regained the trust of the mechmarket mods, again. And then I would still be extremely cautious. I personally would never trust this man with my money.

Tyson · « **Reply #75 on:** Wed, 06 November 2019, 10:04:18 »

Quote from: TypicalOranges on Wed, 06 November 2019, 08:29:10

Quote from: dgneo on Wed, 06 November 2019, 08:24:37
Show Image

I'd exercise caution before joining a Quantrik GB.

https://www.reddit.com/r/mechmarket/comments/dpgrdg/ustx_h_kyuu_red_or_silver_w_trades_75_or_tkl/f5vu32f/

He is currently banned from Mechmarket (the largest buy/sell/trade board in Mechanical Keyboards) until he makes right; I'd not only exercise caution, but I would straight up *not* join a GB he's putting on until he has regained the trust of the mechmarket mods, again. And then I would still be extremely cautious. I personally would never trust this man with my money.

This is literally a dead project, can you guys please just leave him alone, you did you part, you got him banned from mm, and keep dragging others down by being ultra toxic and ganging up on whoever you want.

dgneo · « **Reply #76 on:** Wed, 06 November 2019, 10:43:04 »

Quote from: tyson522 on Wed, 06 November 2019, 10:04:18

Quote from: TypicalOranges on Wed, 06 November 2019, 08:29:10
Quote from: dgneo on Wed, 06 November 2019, 08:24:37
Show Image

I'd exercise caution before joining a Quantrik GB.

https://www.reddit.com/r/mechmarket/comments/dpgrdg/ustx_h_kyuu_red_or_silver_w_trades_75_or_tkl/f5vu32f/

He is currently banned from Mechmarket (the largest buy/sell/trade board in Mechanical Keyboards) until he makes right; I'd not only exercise caution, but I would straight up *not* join a GB he's putting on until he has regained the trust of the mechmarket mods, again. And then I would still be extremely cautious. I personally would never trust this man with my money.

This is literally a dead project, can you guys please just leave him alone, you did you part, you got him banned from mm, and keep dragging others down by being ultra toxic and ganging up on whoever you want.

He commented on this post 8 days ago, and more people have commented interest in it in the past 8 days - if it's literally a dead project, this thread should be closed.

More so to the point, people should be informed if they're thinking of joining a group buy.

Digitize · « **Reply #77 on:** Wed, 06 November 2019, 11:39:46 »

Thank for the info. Sad as it may seem my caution is in full force.

Sent from my iPhone using Tapatalk

News:

Author Topic: QuantBox 12x5 artisan case (Read 11396 times)