ApprovedThank you <3
GLGL ;DApprovedThank you <3
Will the 280 PCB or h87a PCB fit in this?
Also assuming this does not include PP fees?
Also, I'm confused. Is the two tone black/gray there to show you what the gray looks like? Or is there a black?Yeah, it's to show how the grey looks like in comparison to black.
Also, I'm confused. Is the two tone black/gray there to show you what the gray looks like? Or is there a black?Yeah, it's to show how the grey looks like in comparison to black.
Did I miss it?It's in 24h 24 min
Did I miss it?It's in 12h 24 min
Did I miss it?It's in 12h 24 min
Oh I thought it said 12PM Eastern Time, but I'm no good at US timezones... :))Did I miss it?It's in 12h 24 min
24h 24 min*
Its 11AM CST
Oh I thought it said 12PM Eastern Time, but I'm no good at US timezones... :))Did I miss it?It's in 12h 24 min
24h 24 min*
Its 11AM CST
Wew how many people are watching this thread :-X5
I am not seeing Blue Grey option, but will there be one on the actual form tomorrow?
Can't wait!! :thumb:
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this? (https://i.imgur.com/7AO75Is.jpg)
Oof I should let go of my M60-AIf I can get into this GB, that's exactly what I'm doing.
Just a tip to those who haven't submitted a form in a FCFS situation before. Don't worry about options. Just fill in the form with your correct information and check whatever options look right at a glance. You can change your order afterwards :)
I know some people won't want everyone knowing their tricks, but I felt the need to share.
Just a tip to those who haven't submitted a form in a FCFS situation before. Don't worry about options. Just fill in the form with your correct information and check whatever options look right at a glance. You can change your order afterwards :)
I know some people won't want everyone knowing their tricks, but I felt the need to share.
Just a tip to those who haven't submitted a form in a FCFS situation before. Don't worry about options. Just fill in the form with your correct information and check whatever options look right at a glance. You can change your order afterwards :)
I know some people won't want everyone knowing their tricks, but I felt the need to share.
Reeeeee
Lol good advice only pertains to me if i had the money lolJust a tip to those who haven't submitted a form in a FCFS situation before. Don't worry about options. Just fill in the form with your correct information and check whatever options look right at a glance. You can change your order afterwards :)
I know some people won't want everyone knowing their tricks, but I felt the need to share.
Reeeeee
Damn you. I might just have to get some chilly JTK keycaps b/c of that comment.
Still rockin' my titanium gray v1.
:cool:Show Image(https://i.imgur.com/vajJw76.jpg)
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Don’t know if you followed the IC at all but yuktsi explicitly said blue-grey. Hence the confusion by several here.
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Don’t know if you followed the IC at all but yuktsi explicitly said blue-grey. Hence the confusion by several here.
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Don’t know if you followed the IC at all but yuktsi explicitly said blue-grey. Hence the confusion by several here.
Oh my bad. It does look more blue gray than blue to me but I guess it is confusing :p
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Don’t know if you followed the IC at all but yuktsi explicitly said blue-grey. Hence the confusion by several here.
Oh my bad. It does look more blue gray than blue to me but I guess it is confusing :p
I was pretty confused about that too, since the photo looks way more blue than grey but I guess it could be the lighting?
Do we have color samples for the Blue-Grey?Seconding this. Will that be an option offered and based on what was discussed in the last IC page, will it be close to a more muted blue grey like this?Show Image(https://i.imgur.com/7AO75Is.jpg)
+1
compared to this pic, the Blue in the first post is lookin hella blue, rather than "blue-grey". Is the sample in OP the final color?
It says "blue" in the OP, so that's probably why? Yuktsi has never mentioned Blue Gray.
Don’t know if you followed the IC at all but yuktsi explicitly said blue-grey. Hence the confusion by several here.
Oh my bad. It does look more blue gray than blue to me but I guess it is confusing :p
I was pretty confused about that too, since the photo looks way more blue than grey but I guess it could be the lighting?
From my experience, the blue shows in direct light (which the photo is), and is a lot more gray out of direct/at an angle.
Imma not sleep tonight to join, let me in buddy. Love from Australia and Hong Kong.
Imma not sleep tonight to join, let me in buddy. Love from Australia and Hong Kong.
Go to bed yo
Lol guys yuktsi is lying the GB is November 2, not October 2. Pack up your wallets folks (((so i can get first dibs)))Imma not sleep tonight to join, let me in buddy. Love from Australia and Hong Kong.
Go to bed yo
yeah go to bed so i can take your spot yo
Yuktsi said his blue gray is a slightly darker shade of the OTD one if I remember right.
If i'm lucky enough to get a spot... can i go back and edit my order/quantity/options?
If i'm lucky enough to get a spot... can i go back and edit my order/quantity/options?
If the same thing were to happen like the alice buy, yeah you can edit the google forms after
For Alice he set it so you can edit your response :)If i'm lucky enough to get a spot... can i go back and edit my order/quantity/options?
If the same thing were to happen like the alice buy, yeah you can edit the google forms after
Or poor yuktsi is going to have to edit orders and reply to pms for every single order submitted in haste.
Y'all with your human fingers.. I have already programmed a web bot that utilizes OpenCV with a backing of ten servers (hosted in Malaysia, mind you, for lower latency) for instantaneous processing of imagery data to analyze and compute outputs for the inputs of the form. I've stress tested it with 1337 random google group-buy forms of varying complexity and it has a time-to-submit in 510 milliseconds (that's the p50 latency, you don't even wanna know about the p99.9 latency).
So.. #1 invoice is mine, may the best program win.
/s
Will the ALPS PCB fit the plate and case of these recent ALPS-compatible cases: Mira, Mech27 V2, LZ-CLS/GHv2, TX84/87?That's possible. Just PM me later. . Not sure about LZ-CLS/GHv2, it should work with the rest that you mentioned
Possible to buy extra ALPS PCBs past the first PCB/plate combo without the plate? Let's say two PCBs and one alu plate?
Out of curiosity, what is the height of the front edge? Shallow angle is super attractive but I'm not sure I need another heavy TKL.it's 18.86mm, just realized it's only 0.04mm taller than an 8deg case
@yuktsi: Can we mix and match top and bottom colors? Was thinking about Grey top with Black bottom.Yeah, that is allowed.
Also, RIP my dreams, don't see black as an option. Blue-Grey it is.
Thank you Signature for the prompt approval. I'd done editing the first post, you guys should have another look while waiting. The "Blue" is indeed blue-grey, the shade has yet to be confirmed. I am hoping to have it done similar to the 356.2's tone.
lol the gb opened at 1126 when I randomly clicked it.
Fewer units rip. Hope there's extras for us unfortunate souls. :'(
I feel that way. my fingers are scaredFewer units rip. Hope there's extras for us unfortunate souls. :'(
the form haven't been opened and you're giving up alrd? :eek:
lmao, captcha has the nerve...
Will it stop taking responses after 40?
I am on chrome... oh well I think i know why.. :))lmao, captcha has the nerve...
Use google chrome for things like this
Done!!! :) 48 seconds it took me... panic set in.
When is it safe to edit my selection?
Will it stop taking responses after 40?
I don't think so.
If we got submitted, wouldn't that mean we're in? You would think it would cap out after X responses?
If we got submitted, wouldn't that mean we're in? You would think it would cap out after X responses?I think it keeps those for wait list
I edited my form, and submitted by mistake. Does that still register the first form or is this like a timeskip I just did to myself?
Haha, after 11 you didnt get in?If we got submitted, wouldn't that mean we're in? You would think it would cap out after X responses?
Nope, she'll close the form in a while. You won't know until invoices go out. Last time I submitted in 11 seconds and didn't get it. Think I shaved it down to about 9 this time, but I don't have high hopes. Pretty sure some people have sneaky tactics.
cut-off time is 00:41
Thank you, guys.
cut-off time is 00:41
Thank you, guys.
my hands shaking yo
I edited my form, and submitted by mistake. Does that still register the first form or is this like a timeskip I just did to myself?The first form. Don't worry you are in.
Yutski, when do we get to know if we got in?Looks like you are in
cut-off time is 00:41
Thank you, guys.
I edited my form, and submitted by mistake. Does that still register the first form or is this like a timeskip I just did to myself?
Yutski, when do we get to know if we got in?
Yeahcut-off time is 00:41
Thank you, guys.
I was at exactly 41 seconds. Does that mean I made it? Hearts still racing lol
Yeahcut-off time is 00:41
Thank you, guys.
I was at exactly 41 seconds. Does that mean I made it? Hearts still racing lol
Yeahcut-off time is 00:41
Thank you, guys.
I was at exactly 41 seconds. Does that mean I made it? Hearts still racing lol
How do I know what time I took to fill the form? :thinking:
How do I know what time I took to fill the form? :thinking:
View SMTP header for email from Google, should be "show original" underneath the three dots icon doodad. Unless you're on mobile like me, then you have no idea
Isn't there some sort of delay for email confirm though?If you use Gmail there is no latency between form submission and confirmation email.
Mine was 54.
Isn't there some sort of delay for email confirm though?If you use Gmail there is no latency between form submission and confirmation email.
Mine was 54.
Wait.....did I actually make it then? It felt like I took an eternity.you did!
Received: by 2002:a2e:998b:0:0:0:0:0 with SMTP id w11-v6csp48427lji;
Tue, 2 Oct 2018 09:00:38 -0700 (PDT)
maybe one day i will get in fast enough on a TGR group buy :(
@yuktsi since i am not 100% sure if my mail was right will you post something like a list with the usernames who made it or how will it work ? i think i was intime, but i didnt got any mail from google ...
@yuktsi thank you so much for this. Super exciting GB :)
Is the regular blue close to this color?
https://i.imgur.com/7AO75Is.jpg
All blue... or gray top/cyan bottom... or all cyan.
What color combo is best?
X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
Gotta start the aftermarket. :)) :))
$1000 buying a grey spot.
Are people already getting invoices?
maybe one day i will get in fast enough on a TGR group buy :(
there's always r/mm
(Attachment Link)
So sad, work places blocks google forms so I had to use mobile...rip
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
So sad, work places blocks google forms so I had to use mobile...rip
Mannnn, what are you guys going with? Dark Grey or Blue?
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
Tue, 02 Oct 2018 09:00:32 -0700 (PDT)
beat me by a second, someone else on keychatter slack was 00:28 I think.
adrenaline still pumping, gonna go for a run lol
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
Got :29
But I was reading all the options :|
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
Tue, 02 Oct 2018 09:00:32 -0700 (PDT)
beat me by a second, someone else on keychatter slack was 00:28 I think.
adrenaline still pumping, gonna go for a run lol
Yikes! We are fast fillers indeed! I need to have a chat with the guy with :28.. I need to see how ripped his fingers are to go that fast.
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Invoice won't be out so soon. Will do it over the next 48 hours.Thanks for your hard work! Will you be posting the winners anywhere?
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Invoice won't be out so soon. Will do it over the next 48 hours.
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Code: [Select]X-Received: by 2002:a02:f4d:: with SMTP id h74-v6mr12527127jad.88.1538496031823;
Tue, 02 Oct 2018 09:00:31 -0700 (PDT)
:eek: Am I the fastest here?
Tue, 02 Oct 2018 09:00:32 -0700 (PDT)
beat me by a second, someone else on keychatter slack was 00:28 I think.
adrenaline still pumping, gonna go for a run lol
Yikes! We are fast fillers indeed! I need to have a chat with the guy with :28.. I need to see how ripped his fingers are to go that fast.
I mean, I typed the first letter of my email address, Chrome auto filled, check 3 or 4 radio buttons, hit next, typed "pixelpusher", checked a radio button or two and submitted. I think I only typed like 14 characters in all
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Invoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
I really really like this boardShow Image(https://i.imgur.com/7AO75Is.jpg)
If it's really like this color... <3 <3 <3
Invoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
I really really like this boardShow Image(https://i.imgur.com/7AO75Is.jpg)
If it's really like this color... <3 <3 <3
Invoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
will there be a "winner-list" ?
most def notInvoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
will there be a "winner-list" ?
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
I really really like this boardShow Image(https://i.imgur.com/7AO75Is.jpg)
If it's really like this color... <3 <3 <3
most def notInvoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
will there be a "winner-list" ?
so how do we know if we are in ?
You will get an invoice sent to you where you pay for the keyboard. If you don't get an invoice you are probably not in.most def notInvoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
will there be a "winner-list" ?
so how do we know if we are in ?
I really really like this boardShow Image(https://i.imgur.com/7AO75Is.jpg)
If it's really like this color... <3 <3 <3
Soz I'm just bad informed, I'll let yuktsi answer the question, since I have no inside info.You will get an invoice sent to you where you pay for the keyboard. If you don't get an invoice you are probably not in.most def notInvoice won't be out so soon. Will do it over the next 48 hours.
will there be some other way of confirmation that we are in, or just anxiety for the next few days? :D
same haha, would like to see the winner list and go to sleep with tears haha.
will there be a "winner-list" ?
so how do we know if we are in ?
is this a new policy? if so, how come?
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
I don't think I made it... Yuktsi please make a little more!! 40 is so low!
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Did you finish in over 41 seconds?
Shiiit i opened the form again and didnt hit submit
Am i screwed bois
Steps to win:
1) Set all LEDs to red, but make sure you have RGB anyways.
(Red = Speed)
2) Pull out the corsair with speed switches. Everyone knows your typing needs to be fast enough and speed switches are the only way.
3) Make sure your monitor is 144hz. You're going to need to fill out the google form so fast that the extra framerate will actually help
4) Employ dozens of third world country children to fill out the form for you. For only pennies a day, you can give these children jobs.
5) Whole milk, mountain dew, prune juice, red bull, monster, and herbal tea need to be mixed for the ultimate speed/gamer juice.
6) Make sure you stream on Twitch because you're essentially a speed runner now.
7) If you can, get the Razer phone and plug in a keyboard. It's very fast and will definitely shave milliseconds off your form fill time.
GL everyone
Edit: ConfirmedShow Image(https://i.gyazo.com/8b04d250d5e05c1869c4f6dcb2e143aa.png)
Sorry, I don't normally share a winner list. The cut-off time was 00:41, if your email timestamp shows that you submitted your form before that, or at 00:41, then you are in. If you are not sure, you may send me a PM here or at Discord (yuktsi#9904). Invoices will go out in the next two day.
Once again, thank you all for the overwhelming response. We can always have a second round if this round goes well.
Sorry, I don't normally share a winner list. The cut-off time was 00:41, if your email timestamp shows that you submitted your form before that, or at 00:41, then you are in. If you are not sure, you may send me a PM here or at Discord (yuktsi#9904). Invoices will go out in the next two day.
Once again, thank you all for the overwhelming response. We can always have a second round if this round goes well.
Are you accounting for the time in seconds that the form took a **** and wouldn't load because of everyone
reloading profusely? Lol.
Seriously people, why create this artificial demand by making the item so scarse? Why not just take all orders and produce all the boards , make some good profit from the sales. Get a few people on your manufacturing team to help out with logistics.
Now i know people will jump on me with all sorts of reasons, excuses, winning, and explanations on why only 40-50 units made makes all the perfect sense. Sure, go ahead and educate me...You are probably the same suckers paying double or triple for these boards on Mechmarket in 1/2 a year’s time.
Why should profiteers/scalpers come out from this with a profit and not a keyboard designer himself? Explain that part to anyone.
Did you finish in over 41 seconds?
I don't even need 41 seconds to finish...MoreMoreMore( ͡° ͜ʖ ͡°)
Sorry, I don't normally share a winner list. The cut-off time was 00:41, if your email timestamp shows that you submitted your form before that, or at 00:41, then you are in. If you are not sure, you may send me a PM here or at Discord (yuktsi#9904). Invoices will go out in the next two day.
Once again, thank you all for the overwhelming response. We can always have a second round if this round goes well.
Are you accounting for the time in seconds that the form took a **** and wouldn't load because of everyone
reloading profusely? Lol.
Well my page was bugged because Google said the form is unavailable due to a large traffic, but hey if Google can’t handle it then who can, chill.
Sorry, I don't normally share a winner list. The cut-off time was 00:41, if your email timestamp shows that you submitted your form before that, or at 00:41, then you are in. If you are not sure, you may send me a PM here or at Discord (yuktsi#9904). Invoices will go out in the next two day.
Once again, thank you all for the overwhelming response. We can always have a second round if this round goes well.
Are you accounting for the time in seconds that the form took a **** and wouldn't load because of everyone
reloading profusely? Lol.
Well my page was bugged because Google said the form is unavailable due to a large traffic, but hey if Google can’t handle it then who can, chill.
Exactly @12pm the form went down for a few seconds and was unavailable to actually fill out. Took a s*** is Michigan slang for "didn't work". :D
welp hoping for b-stock. google form took a **** so i lost 10-20 seconds :\
Just filled out my form, am I too late?
I’ll be honest with everyone here. This was my absolute first time observing how this custom korean keyboard group by is run. And after seeing how his so called nice guy, or as everyone likes to call him the keyboard “god” is so politely and pleasantely running this circus, i’ve lost all interest in owning a TGR. This whole 42 seconds and 40-50 units round looks nothing but a gimick to elevate his own status.
‘Exclusive’ someone said? Give me a break. At this point in time (late 2018) this board has nothing exclusive going for it other than the name. It’s a 2014 design with some unnecessary added weights, because everyone else around is adding weights to their designs. it’s very trendy right now to polish that brass and talk about added kilograms.
Enjoy your ‘exclusivity’ club people and continue to brag about how quickly you can fill in those google forms. Now that i’ve seen what this entails, i will not participate and support such circus ever again. I would rather send my money to Wei on kbdfans and enjoy my masproduced chinese products.
Now ya’ll can go on and trash me for speaking my mind. Lay praise on your exclusive keyboard gods.
Just filled out my form, am I too late?
yes
Mod Edit: Removed quoted post per user's request after editing their post
Shiiit i opened the form again and didnt hit submit
Am i screwed bois
did you got a confirmation mail ?
Well said ZekkI’ll be honest with everyone here. This was my absolute first time observing how this custom korean keyboard group by is run. And after seeing how his so called nice guy, or as everyone likes to call him the keyboard “god” is so politely and pleasantely running this circus, i’ve lost all interest in owning a TGR. This whole 42 seconds and 40-50 units round looks nothing but a gimick to elevate his own status.
‘Exclusive’ someone said? Give me a break. At this point in time (late 2018) this board has nothing exclusive going for it other than the name. It’s a 2014 design with some unnecessary added weights, because everyone else around is adding weights to their designs. it’s very trendy right now to polish that brass and talk about added kilograms.
Enjoy your ‘exclusivity’ club people and continue to brag about how quickly you can fill in those google forms. Now that i’ve seen what this entails, i will not participate and support such circus ever again. I would rather send my money to Wei on kbdfans and enjoy my masproduced chinese products.
Now ya’ll can go on and trash me for speaking my mind. Lay praise on your exclusive keyboard gods.
Okay since my actual serious response to this absurd post got deleted, I'll post another actual serious response.
Take a step back, take a deep breath. This is a hobby and I think sometimes people let their emotions get the better of them. That being said, you need to actually consider what goes into these group buys. Yuktsi is one person handling the whole group buy. He picks up the raw machined units and brings them to anodizing himself. There are SEVEN parts that go into this keyboard -- that's 7*40 units that need QC after the anodizing is complete. If there are any defects, the unit is rejected and parts have to be remade. For example, in TGR-Alice, all the silver units were rejected and had to be remade, most of the black units faced the same fate. TGR has a history of great keyboards and even the Jane and Jane CE are still highly sought after. Why do you think people still pay thousands of dollars for OTD keyboards? They're outdated technology that is arguably functional, I don't see you complaining about that.
Anyway, I'd like to challenge you to run a group buy of even just 40 damn units and handle it with as much care and responsibility as Yuktsi.
Get some perspective and as always if you don't have anything nice to say, keep it to yourself.
ty mod who deleted my post trying to help a new guy outNo worries.
TGR sales are the new Clack sales yall
Grats to those who got one, yuktsi does lovely work
TGR sales are the new Clack sales yall
Grats to those who got one, yuktsi does lovely work
What does an OG TGR go for these days?
TGR sales are the new Clack sales yall
Grats to those who got one, yuktsi does lovely work
What does an OG TGR go for these days?
Will TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
Will TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
Will TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
That's awesome, but V2 all the way.
Question here though. The half plate add-on, is it 1.5mm or any other thickness?
Will TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
That's awesome, but V2 all the way.
Question here though. The half plate add-on, is it 1.5mm or any other thickness?
its 0mm on the alphas
Any idea on when the next round could be? 2019 Q2, Q3?Hopefully 2019 Q1
gooby pls
Hey, it is 1.5mmWill TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
That's awesome, but V2 all the way.
Question here though. The half plate add-on, is it 1.5mm or any other thickness?
Hi Yuktsi, It didn't seem that you responded to the one question that was asked before regarding the h87a. Will the h87a fit or is it better to just get a second jane pcb? thanks!Yeah, hiney is making some changes, Jane v2 will support h87a.
edit: just found the anwer in the h87a gb thread... stupid me. thanks anyways!
Gone in 45s
cut-off time is 00:41
Thank you, guys.
Invoices haven't gone out yet have they?Nope, at least not mine
Invoices haven't gone out yet have they?
Invoices haven't gone out yet have they?
Did I win?
Did I win?
You're a winner in my book.
What switches are we going with for those lucky winners?
I can't decide. I have like 100 switches I'm testing out via testers... I may just go plain jane MX blacks, 62g, lubed.. or 62g ergos. I just don't know
Did I win?
You're a winner in my book.
What switches are we going with for those lucky winners?
I can't decide. I have like 100 switches I'm testing out via testers... I may just go plain jane MX blacks, 62g, lubed.. or 62g ergos. I just don't know
I have two places/pcbs so I'll prob do one ergos and the other some form of linear, retooled blacks as a default but i never know
Did I win?
You're a winner in my book.
What switches are we going with for those lucky winners?
I can't decide. I have like 100 switches I'm testing out via testers... I may just go plain jane MX blacks, 62g, lubed.. or 62g ergos. I just don't know
I have two places/pcbs so I'll prob do one ergos and the other some form of linear, retooled blacks as a default but i never know
Lol exactly what I was going to do. I'm also ordering an extra pcb/plate.
You doing the half plate for 2nd?
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Have you found a way to make clears less scratchy or do you just get used to it? I've tried thick lube, trybosis, mixture of 204 and 1514. Nothing seems to take out the scratchy noise. It seems like it must be coming from the stem legs on the metal leaf but even lubing there doesn't help. I like the bump a lot. I even like the stock springs a lot. Just don't like the scratch.
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Purchased two PCBs from your store today. Am I safe to assume that the PCB is going to fit 100%? :)
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Purchased two PCBs from your store today. Am I safe to assume that the PCB is going to fit 100%? :)
Yep, Yuktsi gave me the outline/dimensions of the Jane V2 PCB and I adjusted h87a to fit it.
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Purchased two PCBs from your store today. Am I safe to assume that the PCB is going to fit 100%? :)
Yep, Yuktsi gave me the outline/dimensions of the Jane V2 PCB and I adjusted h87a to fit it.
Will you be stocking some of them or only providing during your GB for it?
Realized now I may want a QMK pcb down the line
Just got an invoice for NTW Keyboards, anyone else get this? Gonna PM Yutski about this cause I always got invoiced by TGR
Just got an invoice for NTW Keyboards, anyone else get this? Gonna PM Yutski about this cause I always got invoiced by TGRYeah, that's a correct account.
Just got an invoice for NTW Keyboards, anyone else get this? Gonna PM Yutski about this cause I always got invoiced by TGRYeah, that's a correct account.
Have all invoices gone out? Sent you a PM btw! :)Just got an invoice for NTW Keyboards, anyone else get this? Gonna PM Yutski about this cause I always got invoiced by TGRYeah, that's a correct account.
Poly half + h87a + ergo clears. Not sure if I want to go with the ones I have built/desoldered from an old board (72g, 3204g0, film) or rebuild with 67g springs.
Have you found a way to make clears less scratchy or do you just get used to it? I've tried thick lube, trybosis, mixture of 204 and 1514. Nothing seems to take out the scratchy noise. It seems like it must be coming from the stem legs on the metal leaf but even lubing there doesn't help. I like the bump a lot. I even like the stock springs a lot. Just don't like the scratch.
Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
Moving quick, love to see it! :)
When do we need to commit to colors officially by? And also do you plan on getting a sample of the blue-grey as you envision it?
I am getting some anodized blocks for the blue-grey next week. Color change is still possible until the end of this month.Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
Moving quick, love to see it! :)
When do we need to commit to colors officially by? And also do you plan on getting a sample of the blue-grey as you envision it?
Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
I am getting some anodized blocks for the blue-grey next week. Color change is still possible until the end of this month.
Thanks.
Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
Messaging about transferring my spot
Invoices are all out. Drop me PM here or Discord (yuktsi#9904) if you have any questions. The aluminum blocks will get delivered next week, production shall begin by the 15th of October.
Thank you guys <3
Messaging about transferring my spot
Yuktsi I hope this doesn't become the trend for this buy - myself and many others were extremely interested in joining this and I'd hope that any refused/refunded invoices would move down the line to the next person's order.
You assuming it's a flip or something?
you could probably get a free board from a flip, not that bad for being fast at filling a form
Still looking for someone to pick up the alps pcb/plate kits for me if anyones interested!
Yutski, I believe we would all appreciate some more teaser pictures of the proto. :pPhotos of the protos are posted in the GB and IC thread?
Paid :thumb:Thank you. No, it doesn’t have a proper number engravings like the v1
BTW, v2 will get number engraving like v1?
I patiently waited 3 years for the perfect TKL to pop up on here before dropping serious coin on a dream keyboard. From the aesthetics, materials and a renowned designer such as Yuktsi, I have a feeling that my patience is going to pay off.
My KUL ES-87 will finally retire from daily driver status, and I can now sell off the many expensive "learning experiences" of the 40%-75% layout variety.
Can't speak for the rest of the group buy winners, but #40/40 is going to be thoroughly appreciated and used RELIGIOUSLY.
I patiently waited 3 years for the perfect TKL to pop up on here before dropping serious coin on a dream keyboard. From the aesthetics, materials and a renowned designer such as Yuktsi, I have a feeling that my patience is going to pay off.
My KUL ES-87 will finally retire from daily driver status, and I can now sell off the many expensive "learning experiences" of the 40%-75% layout variety.
Can't speak for the rest of the group buy winners, but #40/40 is going to be thoroughly appreciated and used RELIGIOUSLY.
That is honestly some crazy jump in upgrades you have.
I'm excited for you. :thumb: Always nice to see someone who expresses their enthusiasm like that. Hope it turns out to be what you expect, or better yet, exceed those expectations.
does this work with hineybush
Show Image(https://i.gyazo.com/7399109c4f7939fde74b9adbec3fa144.png)Show Image(https://i.gyazo.com/3cfc54c7f44d9cefa8e6c4a250f1e454.png)
lets do it
Show Image(https://i.gyazo.com/7399109c4f7939fde74b9adbec3fa144.png)Show Image(https://i.gyazo.com/3cfc54c7f44d9cefa8e6c4a250f1e454.png)
lets do it
Sign me up, fam. However, I think it would look better if you moved the TGR logo to the front near the left chest area, and then the, “I finish in 41 seconds or less”, under the hoodie for maximum dankness and memes
since TKL wrist rests are common anyway.
Show Image(https://i.gyazo.com/7399109c4f7939fde74b9adbec3fa144.png)Show Image(https://i.gyazo.com/3cfc54c7f44d9cefa8e6c4a250f1e454.png)
lets do it
How's everyone doing today?
What store has the best value in stock Cherry MX switches?
How's everyone doing today?
What store has the best value in stock Cherry MX switches?
How's everyone doing today?
What store has the best value in stock Cherry MX switches?
arrow.com is a electronics distributor that sells retooled MX Blacks for $0.21~$0.22 when they restocked and are not inflating their prices.
How's everyone doing today?
What store has the best value in stock Cherry MX switches?
arrow.com is a electronics distributor that sells retooled MX Blacks for $0.21~$0.22 when they restocked and are not inflating their prices.
Prices on Arrow are now much higher on blacks, around 0.52$ each buying 100.
They use to have two different PN for blacks, but seems it’s gone now...
Hi all,
Most likely, if time permits, I'll do a wrist rest run with wood for TGR Jane. I did the previous wrests for TGR Alice (https://typehype.net/threads/alice-wrist-rest-r2.486/#post-3080 and https://www.instagram.com/p/Bl4lDyVjJva/?taken-by=aeryxz) and currently completing the wrest r2 for alice.
Cheers,
Eric
Dropped the ball and missed the GB.
Anyone willing to sell a red spot?
Dropped the ball and missed the GB.
Anyone willing to sell a red spot?
Best I can do is sell you a printout of a Red-Jane for $300
Dropped the ball and missed the GB.
Anyone willing to sell a red spot?
Best I can do is sell you a printout of a Red-Jane for $300
With a thank you letter in red font, red paper is too expensive to manu
Dropped the ball and missed the GB.
Anyone willing to sell a red spot?
Hi all,
Most likely, if time permits, I'll do a wrist rest run with wood for TGR Jane. I did the previous wrests for TGR Alice (https://typehype.net/threads/alice-wrist-rest-r2.486/#post-3080 and https://www.instagram.com/p/Bl4lDyVjJva/?taken-by=aeryxz) and currently completing the wrest r2 for alice.
Cheers,
Eric
Just put a TGR sticker or engrave urself and do an enamel fill. ezpzsince TKL wrist rests are common anyway.
TGR branding tho
I don't think there's going to be a shortage of people wanting to buy slots/s wts spot, 100k + shipping and handling
Whack a dollar sign and a couple more zeroes on the end and you could tempt meI don't think there's going to be a shortage of people wanting to buy slots/s wts spot, 100k + shipping and handling
Alright. Being sold in KWD now.Whack a dollar sign and a couple more zeroes on the end and you could tempt meI don't think there's going to be a shortage of people wanting to buy slots/s wts spot, 100k + shipping and handling
Hey Yuktsi, any word on those blue samples? I'll likely be in for the blue and black combo anyway.
Any updates on the blue gray? The anticipation is killing meh.
Any updates on the blue gray? The anticipation is killing meh.
Any updates on the blue gray? The anticipation is killing meh.
What samples where???Show Image(https://uploads.tapatalk-cdn.com/20181026/d9c008041d6a064ee2445103e0643cb0.jpg)
Wow did I miss the gb
You guys are about 24 days and 41 seconds too late. Ended a while back.Wow did I miss the gb
I hope not, because that would mean I did too as well also.
You guys are about 24 days and 41 seconds too late. Ended a while back.
Do we have a cutoff date on color choices Yuktsi?
[...] Should expect the color sample for blue/blue-grey in 1-2 weeks. So, color change is still possible until the end of this month.
Wow did I miss the gb
Will there be a R2?
Will there be a R2?
r2v2? I love that droid!
Will there be a R2?
r2v2? I love that droid!
Is it a different model or a version 2 of R2?! :confused:
Will there be a R2?
r2v2? I love that droid!
Is it a different model or a version 2 of R2?! :confused:
Will there be a R2?
r2v2? I love that droid!
Is it a different model or a version 2 of R2?! :confused:
New model. It has split space and extra room for hologram messages.
Any updates on the blue gray? The anticipation is killing meh.
What samples where???Show Image(https://uploads.tapatalk-cdn.com/20181026/d9c008041d6a064ee2445103e0643cb0.jpg)
Hi, is this the best location to look for updates on the GB? Seems some have access to information (eg. blue color sample pic) that wasn't originally posted on this thread. Checking because I know color selection window is closing at end of this month and I haven't seen any communication from Yuktsi regarding the blue color sample.
Thanks!
I would personally wait for an official update to be posted here on the thread.
Sent from my mobile using Tapatalk
Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1 :p
No TGR design has been the exact same.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1 :p
R1?
I don't think this exact board will be ran a second time.
Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1 :p
Hey bmilcs, How'd you work out that you were number 40?
I want to know what number I was!
We're coming up here to the last days of the month.Since we still have sometime before the anodizing, I am still working on the blue-gray. Another batch of samples should be ready next week.
I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.
But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?
Hey bmilcs, How'd you work out that you were number 40?
I want to know what number I was!
Invoice had numbers on them so I would assume from that
Hey bmilcs, How'd you work out that you were number 40?
I want to know what number I was!
Invoice had numbers on them so I would assume from that
probably just because he entered at 41 seconds, as my invoice number was 41 and I entered with 35 seconds. either he asked yuktsi or he doesnt know there were multiple with 41s
I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
IT will probably still not be the same design, something like a CE or s
If it is, it won't be for years.
Here is the commentAny idea on when the next round could be? 2019 Q2, Q3?Hopefully 2019 Q1
gooby plsHey, it is 1.5mmWill TGR Jane be available on Typemachina later on? I'm quite confused.Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.
That's awesome, but V2 all the way.
Question here though. The half plate add-on, is it 1.5mm or any other thickness?
I know he wrote that, just based my comment on past gbs of him. We will just have to wait and see :thumb:Thats cool that you were aware but I posted this for bdkrzy to not be confused by the conflicting messages of people who don't know :thumb:
I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
Oof CEI could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
It won’t be the same. It would be like Jane V2 CE or something.
Oof indeed if that's the case, hopefully I don't fat finger the next form.Oof CEI could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
It won’t be the same. It would be like Jane V2 CE or something.
Oof indeed if that's the case, hopefully I don't fat finger the next form.Oof CEI could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
It won’t be the same. It would be like Jane V2 CE or something.
Oof indeed if that's the case, hopefully I don't fat finger the next form.Oof CEI could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
It won’t be the same. It would be like Jane V2 CE or something.
GL if I'm in the next buy as well muahaha
Oof indeed if that's the case, hopefully I don't fat finger the next form.Oof CEI could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1
R1?
I don't think this exact board will be ran a second time.
If it is, it won't be for years.
It won’t be the same. It would be like Jane V2 CE or something.
GL if I'm in the next buy as well muahaha
Oh, CE version? Put me down on that list too. 41 seconds was way too long. I expected to miss out, so I put in a message in my form while I was filling it out.
Sounds like you're going to be competing for that too!
Any updates on the final design for the weight engravings?
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/507757104606740500/image0.jpg)
He posted this on Discord a few days ago
Yes, that picture/sample is more recent than the first one that was posted here.
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/507757104606740500/image0.jpg)
He posted this on Discord a few days ago
Is this the most recent one? It looks perfect to me.
Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/507757104606740500/image0.jpg)
He posted this on Discord a few days ago
Is this the most recent one? It looks perfect to me.
Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.
Oh, man. That picture is one of my top three favorite keyboard pictures ever.
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/507757104606740500/image0.jpg)
He posted this on Discord a few days ago
Is this the most recent one? It looks perfect to me.
Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.
Oh, man. That picture is one of my top three favorite keyboard pictures ever.
There you goShow Image(https://i.imgur.com/M7QavVH.png)
There you goGorgeous! Can't wait for this board. Thank you so much for the updates.Show Image(https://i.imgur.com/M7QavVH.png)
Will there be extra blue ones?
Will there be extra blue ones?
Yes, but not for you. House rules.
Did i just read that right? Next month?
Could this possibly be the fastest group buy ever?
Did i just read that right? Next month?
Could this possibly be the fastest group buy ever?
fox orange would still win
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
The first batch out is normally fast af but the subsequential batches following it normally take some time. Look at Alice.
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
The first batch out is normally fast af but the subsequential batches following it normally take some time. Look at Alice.
I'd rather wait a year for quality assurance than have someone hold my board for half a year without making any progress
Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
The first batch out is normally fast af but the subsequential batches following it normally take some time. Look at Alice.
I'd rather wait a year for quality assurance than have someone hold my board for half a year without making any progress
As someone who recently received a badly gashed Evil 80, I agree with this wholeheartedlyShipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
Pray for your respective kits to pass QC 🙏
Pray for your respective kits to pass QC 🙏
(Attachment Link)
Watch it! Sometimes people deal with personal issues, then some more personal issues, then some more after that, and some more after that, etc...Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
The first batch out is normally fast af but the subsequential batches following it normally take some time. Look at Alice.
I'd rather wait a year for quality assurance than have someone hold my board for half a year without making any progress
Sometimes people deal with personal issues, then some more personal issues, them some more after that, and some more after that...
Watch it! Sometimes people deal with personal issues, then some more personal issues, then some more after that, and some more after that, etc...Shipping may potentially start next month, but that doesn't mean the GB will finish by December. There may be boards that will be remade due to failing to pass QC
this is a TGR buy after all
a few people will get them mostly on time, but then remakes will slow everyone else up
not that that's a bad thing, better for everyone to get A stock
That TGR quality. Tons better than a lot of other designers/producers. Even the re-dos are faster than others shipping times.
true, i got my alice in like 3 months or something, and it was part of the delayed batch
The first batch out is normally fast af but the subsequential batches following it normally take some time. Look at Alice.
I'd rather wait a year for quality assurance than have someone hold my board for half a year without making any progress
Sent from my Pixel 3 using Tapatalk
We're coming up here to the last days of the month.Since we still have sometime before the anodizing, I am still working on the blue-gray. Another batch of samples should be ready next week.
I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.
But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?
You will still have about a week to decide on the color once the blue-gray is confirmed. Thanks.
so there's gonna be an extra??
so there's gonna be an extra??Iirc yuktsi already confirmed will be another round with slightly different design.
We're coming up here to the last days of the month.Since we still have sometime before the anodizing, I am still working on the blue-gray. Another batch of samples should be ready next week.
I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.
But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?
You will still have about a week to decide on the color once the blue-gray is confirmed. Thanks.
Hi again.
I love you...
PS: Can you post the blue-gray samples you're receiving? Even the veto'ed ones would be cool for us to see.
PPS: Can't wait for my first proper custom. And I love you.
how dare you insult the masterpiece that is the toyko60 like thatWe're coming up here to the last days of the month.Since we still have sometime before the anodizing, I am still working on the blue-gray. Another batch of samples should be ready next week.
I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.
But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?
You will still have about a week to decide on the color once the blue-gray is confirmed. Thanks.
Hi again.
I love you...
PS: Can you post the blue-gray samples you're receiving? Even the veto'ed ones would be cool for us to see.
PPS: Can't wait for my first proper custom. And I love you.
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
>spends 600+ on a top of the line kustom
>still wants to ruin it with a diffuser
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
>spends 600+ on a top of the line kustom
>still wants to ruin it with a diffuser
Hey hey, stop that. It's gamer man.
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
>spends 600+ on a top of the line kustom
>still wants to ruin it with a diffuser
Hey hey, stop that. It's gamer man.
my no 1 had underglow SMDs solder in and i only remember that they're there when i come home after class and hit a few keys on my keyboard and they flash when the pc wakes up
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
>spends 600+ on a top of the line kustom
>still wants to ruin it with a diffuser
Hey hey, stop that. It's gamer man.
my no 1 had underglow SMDs solder in and i only remember that they're there when i come home after class and hit a few keys on my keyboard and they flash when the pc wakes up
But is it really a keyboard if it doesn't have flashy lights?
^-^
I got my poly 910 with unsoldered SMDs. Does this one come with all the PCB's SMD LEDs soldered?
SMD leds for wut tho? Didn’t think a diffuser was even offered.
>spends 600+ on a top of the line kustom
>still wants to ruin it with a diffuser
Hey hey, stop that. It's gamer man.
my no 1 had underglow SMDs solder in and i only remember that they're there when i come home after class and hit a few keys on my keyboard and they flash when the pc wakes up
But is it really a keyboard if it doesn't have flashy lights?
^-^
Keyboard; yes.
Gaming keyboard; no.
How you supposed to get those headshots without arrgeebee??!?
Idk, I use my WASD to aim and mouse to move
Idk, I use my WASD to aim and mouse to move
What DPI do you have your WASD set to?
Much excite 4 this
Much excite 4 this
It's quite excite and amaze. Do you wipe down?
Much excite 4 this
It's quite excite and amaze. Do you wipe down?
Yeet
Has anyone weighed their board? I'd like to know how heavy she is.
Has anyone weighed their board? I'd like to know how heavy she is.
Are the other TGR boards heavy in weight?
Yeah, my 910 is like 5-6kg?
Yeah, my 910 is like 5-6kg?
Your 910 is over 11lb in weight??
I asked about the Jane V2 kit's weight a while ago on Discord:Show Image(https://media.discordapp.net/attachments/299585906900205568/514141780535541780/unknown.png)
Wondering if we can get our time engrave on the underside of the weight. Nice little memento
Wondering if we can get our time engrave on the underside of the weight. Nice little memento
Wondering if we can get our time engrave on the underside of the weight. Nice little memento
pls, no
We still need to see the blue gray, right? Did I miss an updoot?
Here's the pic for anyone looking for an update.
Here's the pic for anyone looking for an update.
it's red
nice
That red would look great with Hydro Cadet.
P.S. I can seez the blue one, pleez?
That red would look great with Hydro Cadet.
P.S. I can seez the blue one, pleez?
Will the v2 r2 be up next after this GB finish?
I think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
I think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
View Yutskis postsI think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
Was that ever confirmed?
View Yutskis postsI think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
Was that ever confirmed?
View Yutskis postsI think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
Was that ever confirmed?
A few vague mentions of one possibly happening Q1 2019 if this one goes to plan (which it seems like it is)
HahahaView Yutskis postsI think they mean the new revision of Jane GB that is to follow...Will the v2 r2 be up next after this GB finish?
hahahaha
Was that ever confirmed?
A few vague mentions of one possibly happening Q1 2019 if this one goes to plan (which it seems like it is)
GL getting into that one as well. Haha
Are we talking about the type machina one?
Are we talking about the type machina one?
LOL
any updates regarding the blue-grey or state of production? i got everything ready for it already :DYou're missing arctic though.
But I got the mint ANSI OG Dyesubs with german numrow + ÖÄÜ etc. :pany updates regarding the blue-grey or state of production? i got everything ready for it already :DYou're missing arctic though.
Show Image(https://uploads.tapatalk-cdn.com/20181219/f23a278955a5d575257e9f3f2874e169.jpg)
Getting the right shade of colour is way harder than I thought :(
Sent from my iPhone using Tapatalk
Show Image(https://uploads.tapatalk-cdn.com/20181219/f23a278955a5d575257e9f3f2874e169.jpg)
Getting the right shade of colour is way harder than I thought :(
Sent from my iPhone using Tapatalk
Show Image(https://uploads.tapatalk-cdn.com/20181219/f23a278955a5d575257e9f3f2874e169.jpg)
Getting the right shade of colour is way harder than I thought :(
Sent from my iPhone using Tapatalk
DRUM ROLL PLEASE...
HERE IS THE OFFICIAL BLUE GRAY SAMPLE, straight from the man himself.
(https://i.imgur.com/8XMTJvY.jpg) (https://i.imgur.com/8XMTJvY.jpg)
I did my best to correct the white balance, but it was very tricky from the cell phone pic I received.
THE HYPE BEGINS.
DRUM ROLL PLEASE...
HERE IS THE OFFICIAL BLUE GRAY SAMPLE, straight from the man himself.
(https://i.imgur.com/8XMTJvY.jpg) (https://i.imgur.com/8XMTJvY.jpg)
I did my best to correct the white balance, but it was very tricky from the cell phone pic I received.
THE HYPE BEGINS.
Thank you as always for the update Yuktsi!
I think I'll stick with dark grey, as beautiful as that blue-grey is. Can't wait for January!
I don't know. That grayish blue looks amazing in my book. But the dark gray will most likely play better w/ keycaps.Show Image(https://i.imgur.com/V7qycvD.jpg)
EDIT -- SORRY for the watermark. It's automatic w/ my Lightroom setup.
Appears to be the same gray as the most recent TX boards. I like mine a lot, and I'm sticking with gray. However, I will say that I was surprised at how difficult it was to use sets with gray in them. I'm too nitpicky to have grays that don't match. However, gray is a great backdrop for so many sets and has good resale value/potential.
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
inb4 everyone gets blue gray :))
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I know it depends on the process/shop doing the anno, but on blue gray boards I've owned the blue only really shows in bright lights, like sunshine and somewhat with fluros. In normal lighting, it's a slightly cool gray with only a hint of blue.
the blue looks fantastic, definitely akin to the 356.2 that was posted earlier on in the thread. sticking with it for sure. can't wait :)Can't wait to see your amazing collection expand! Do share pics when you have em :D
I would agree with this. A post I will make (with photos of a different hue of blue grey) in the forums tomorrow morning should demonstrate this to an extent.I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I know it depends on the process/shop doing the anno, but on blue gray boards I've owned the blue only really shows in bright lights, like sunshine and somewhat with fluros. In normal lighting, it's a slightly cool gray with only a hint of blue.
My body is ready
My body is ready
So. Ready.
Now, to patiently wait for an Arrow.com MX Black sale once again. I procrastinated during the last one.
Did anyone else here start w/ a heavy switch like Cherry MX Clears and end up at 62g such as myself? I've tried 65g lubed Gat Blacks, 65g lubed Zealios, 65g/68g/78g ergoclears, etc. They all end up tiring me out quickly now.
My body is ready
So. Ready.
Now, to patiently wait for an Arrow.com MX Black sale once again. I procrastinated during the last one.
Did anyone else here start w/ a heavy switch like Cherry MX Clears and end up at 62g such as myself? I've tried 65g lubed Gat Blacks, 65g lubed Zealios, 65g/68g/78g ergoclears, etc. They all end up tiring me out quickly now.
I have gone steadily lighter with each build I do. Latest is 62g I think, which feels good. I'm using linears. I have 40g catweewee springs to try out as well but I think that's probably going too far.
My body is ready
Merry Christmas and Happy New Year!!! Hope you have a wonderful time with friends and family over the festive period, and get in plenty of time off the keyboards!
Btw, I'd just responded to all email in regard of the color changes. Do send me a PM here if you didn't hear from me. Thanks.
Merry Christmas and Happy New Year!!! Hope you have a wonderful time with friends and family over the festive period, and get in plenty of time off the keyboards!
Btw, I'd just responded to all email in regard of the color changes. Do send me a PM here if you didn't hear from me. Thanks.
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I know it depends on the process/shop doing the anno, but on blue gray boards I've owned the blue only really shows in bright lights, like sunshine and somewhat with fluros. In normal lighting, it's a slightly cool gray with only a hint of blue.
i belive this is meant to match 356.2, so more blue with grey, rather than a tradtional bluegrey
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I know it depends on the process/shop doing the anno, but on blue gray boards I've owned the blue only really shows in bright lights, like sunshine and somewhat with fluros. In normal lighting, it's a slightly cool gray with only a hint of blue.
i belive this is meant to match 356.2, so more blue with grey, rather than a tradtional bluegrey
I feel .2 is mostly Gray and only really blue in bright lights tbh. Just how it seems to me though, might he wrong though
I'm stuck on deciding between Gray and BlueGray as well, initially ordered Gray and 75% sure at this time that I'll stick to it.
To help with the decision, I made a render. Please keep in mind that THIS IS A ARTISTIC INTERPRETATION OF THE SAMPLE PHOTOS PROVIDED. Felt it was more helpful to see what the entire board in BlueGray MIGHT end up looking like.Show Image(https://i.imgur.com/c3hkTrV.jpg)
I know it depends on the process/shop doing the anno, but on blue gray boards I've owned the blue only really shows in bright lights, like sunshine and somewhat with fluros. In normal lighting, it's a slightly cool gray with only a hint of blue.
i belive this is meant to match 356.2, so more blue with grey, rather than a tradtional bluegrey
I feel .2 is mostly Gray and only really blue in bright lights tbh. Just how it seems to me though, might he wrong though
I'm frankly not sure whom to agree with right now, so I'll post preliminarily some photos of 356.2 that I've found on the net. I can't tell whether there was an actual grey color in the buy other than blue-grey. You guys can decide...Show Image(https://i.pinimg.com/originals/ff/02/65/ff0265204c456e8d23d01a339b459d61.jpg)Show Image(https://i.pinimg.com/originals/95/26/64/9526641444945643341edd15d19011c9.jpg)Show Image(http://i.imgur.com/rdW737t.jpg)Show Image(https://scontent-lga3-1.cdninstagram.com/vp/e50a877e5388010342116ba748b5ac59/5CBE52ED/t51.2885-15/e35/23594678_518371615192769_2042634927844884480_n.jpg?_nc_ht=scontent-lga3-1.cdninstagram.com)Show Image(https://scontent-lga3-1.cdninstagram.com/vp/ecf93c28420f131aa484c222c2ac1d1a/5CB84B76/t51.2885-15/e35/26867889_1549364185161504_9020023838108286976_n.jpg?_nc_ht=scontent-lga3-1.cdninstagram.com)Show Image(https://scontent-lga3-1.cdninstagram.com/vp/ad75ce135a552ef15db291ecaead24fd/5C8E249D/t51.2885-15/sh0.08/e35/s750x750/35576067_1114020072086051_3744827056769204224_n.jpg?ig_cache_key=MTgxODIzNjM2NTYyOTE3NDg3Mg%3D%3D.2)
I've got the weirdest hard on right now.
As a Jane v1 owner, I'm pretty jealous of all you getting these boards. If it weren't for that ti gray color, I'd trade mine for a v2 in a single beat of the heart.
As a Jane v1 owner, I'm pretty jealous of all you getting these boards. If it weren't for that ti gray color, I'd trade mine for a v2 in a single beat of the heart.
Would you choose the blue-grey color that yuktsi has sampled? If not, what color?
As a Jane v1 owner, I'm pretty jealous of all you getting these boards. If it weren't for that ti gray color, I'd trade mine for a v2 in a single beat of the heart.
Would you choose the blue-grey color that yuktsi has sampled? If not, what color?
It's a fantastic color, but maybe difficult for me to pair with keysets. For blue I'd stick to more like a blue offered by kin.
Another bluegray example. QXP with og ta and olivettiShow Image(https://uploads.tapatalk-cdn.com/20181230/0afcd3135543e5b1754d7cc3237f7161.jpg)
Another bluegray example. QXP with og ta and olivettiShow Image(https://uploads.tapatalk-cdn.com/20181230/0afcd3135543e5b1754d7cc3237f7161.jpg)
Another bluegray example. QXP with og ta and olivettiShow Image(https://uploads.tapatalk-cdn.com/20181230/0afcd3135543e5b1754d7cc3237f7161.jpg)
That photo has had some serious color effects applied. The reds/yellows/etc. are completely zapped from it, and the blues look to be enhanced.
That is a very inaccurate example, especially of that particular model.
that's weird - it's pretty accurate color to me. I have the qxp sitting right next to me today. The blue is spot on.
almost like anodized parts can slightly vary in color or something
almost like anodized parts can slightly vary in color or something
No way
almost like anodized parts can slightly vary in color or something
No way
Just a guess
almost like anodized parts can slightly vary in color or something
No way
Just a guess
just sticker bomb it
almost like anodized parts can slightly vary in color or something
No way
Just a guess
just sticker bomb it
the one true path
almost like anodized parts can slightly vary in color or something
No way
Just a guess
just sticker bomb it
the one true path
Can we move the irrelevant discussion to Off Topic or something?
There are people who are subscribed to the thread waiting for the B-stock drop and the excessive notifications can get annoying.
Thanks! 8) :thumb:
I wouldn't hold your breath for b-stock boards. Yuktsi has said before that he doesn't sell boards that don't meet his QC requirements and I doubt he will start now.He sold b stock alices
I wouldn't hold your breath for b-stock boards. Yuktsi has said before that he doesn't sell boards that don't meet his QC requirements and I doubt he will start now.He sold b stock alices
Puddsy's just a post ****
I wouldn't hold your breath for b-stock boards. Yuktsi has said before that he doesn't sell boards that don't meet his QC requirements and I doubt he will start now.He sold b stock alices
I wouldn't hold your breath for b-stock boards. Yuktsi has said before that he doesn't sell boards that don't meet his QC requirements and I doubt he will start now.He sold b stock alices
IIRC he also made way more boards for Alice as well though
What connector does the PCB have anyway? Is like to buy a new cable for it before it arrives.
Hope to see you all on Saturday :D
https://www.reddit.com/r/MechanicalKeyboards/comments/aenp3n/tgr_jane_v2_stream_this_saturday/ (https://www.reddit.com/r/MechanicalKeyboards/comments/aenp3n/tgr_jane_v2_stream_this_saturday/)
I have dreams about this plate, might regret passing on this oneMoreShow Image(https://i.imgur.com/aZuMfiT.jpg)
I will be sure to thoroughly flex my brown alps Jane in here to rub it in :pI have dreams about this plate, might regret passing on this oneMoreShow Image(https://i.imgur.com/aZuMfiT.jpg)
Personally, I should have ordered an Alps plate...
I will be sure to thoroughly flex my brown alps Jane in here to rub it in :pI have dreams about this plate, might regret passing on this oneMoreShow Image(https://i.imgur.com/aZuMfiT.jpg)
Personally, I should have ordered an Alps plate...
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
That is stunning!
But also, what's that grill? It looks baller
That grill is a slap in the face for whoever voted against it.i voted against it and it's still not my cup of tea. ;D
GIB ME THISShow Image(https://cdn.discordapp.com/attachments/312287977151660042/534377997734641674/image0.jpg)
Prototype FR4 plate (no copper) for Jane V2. Will offer black, white, blue, red in fixed ANSI/ISO (only the corresponding enter key, no short left shift on ANSI ver unlike the proto)
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/534377997734641674/image0.jpg)
Prototype FR4 plate (no copper) for Jane V2. Will offer black, white, blue, red in fixed ANSI/ISO (only the corresponding enter key, no short left shift on ANSI ver unlike the proto)
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/534377997734641674/image0.jpg)
Prototype FR4 plate (no copper) for Jane V2. Will offer black, white, blue, red in fixed ANSI/ISO (only the corresponding enter key, no short left shift on ANSI ver unlike the proto)
How stiff is that FR4 plate? I hope it's fairly stiff, b/c I've recently become a hater of uneven plate flex. If that plate was like thin polycarb, it would be all kinds of floppin in the bottom left, bottom right, and top left. I like flex, but it has to be even to be pleasant to me.
DownShow Image(https://cdn.discordapp.com/attachments/312287977151660042/534377997734641674/image0.jpg)
Prototype FR4 plate (no copper) for Jane V2. Will offer black, white, blue, red in fixed ANSI/ISO (only the corresponding enter key, no short left shift on ANSI ver unlike the proto)
Alps FR4 plate when?
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/534377997734641674/image0.jpg)
Prototype FR4 plate (no copper) for Jane V2. Will offer black, white, blue, red in fixed ANSI/ISO (only the corresponding enter key, no short left shift on ANSI ver unlike the proto)
I will be sure to thoroughly flex my brown alps Jane in here to rub it in :pI have dreams about this plate, might regret passing on this oneMoreShow Image(https://i.imgur.com/aZuMfiT.jpg)
Personally, I should have ordered an Alps plate...
I will be sure to thoroughly flex my brown alps Jane in here to rub it in :pI have dreams about this plate, might regret passing on this oneMoreShow Image(https://i.imgur.com/aZuMfiT.jpg)
Personally, I should have ordered an Alps plate...
What cap set do you have for it? I love the aek look but the curve profile would annoy me on this beautiful peice
FR4 plate looks good! And when did voting for weight / grill happen? Don't remember voting on it
But also, what's that grill? It looks baller
prototype weight
But also, what's that grill? It looks baller
prototype weight
sandwich press
Is it too late to add an alps pcb/plate to my order
Are we still anodising or have we finished?
I wonder what this is......... :cool:
Have we seen the final weight design/setup yet?
Super excited for this to come!
Have we seen the final weight design/setup yet?
Super excited for this to come!
Have we seen the final weight design/setup yet?
Super excited for this to come!
https://geekhack.org/index.php?topic=97552.msg2677845#msg2677845
Have we seen the final weight design/setup yet?
Super excited for this to come!
https://geekhack.org/index.php?topic=97552.msg2677845#msg2677845
That's very nice, have we seen any of the final product yet?
Yuktsi it seems like I am too late... but do you have a full black option I wanna get one... tkl is my favorite layout of all :)
hearing from a few people that shipping invoices have begun to go out
hearing from a few people that shipping invoices have begun to go out
Only the ones that went Raw iirc
hearing from a few people that shipping invoices have begun to go out
Only the ones that went Raw iirc
the people i've talked to ordered grey ano
Waiting for... b-stock, v2 r2, v3, Typemachina's Jane..Well be ready to drop $.
I dunno man. Just want TGR TKL board :confused:
JAN3 next? :))
JAN3 next? :))After, J4NE.
Please. Zooey next.
fr4 half plate + pcb mount brown + 3203 g0 + wob + minicom iv + rgbThis formula too OP
JAN3 next? :))After, J4NE.
JAN3 next? :))After, J4NE.
So many JANE5
Dang did I miss my shipping invoice? I didn't get one. Or are they still trickling out?
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
im selling my spot to the first offer of 15k, so yuktsi, puddsy and me can take a nice and smooth worldtrip together. wire transfer only
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
im selling my spot to the first offer of 15k, so yuktsi, puddsy and me can take a nice and smooth worldtrip together. wire transfer only
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
there is a confirmed jane coming on typemachina, we dont know how different it is. thats your best bet at the momentIs there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
im selling my spot to the first offer of 15k, so yuktsi, puddsy and me can take a nice and smooth worldtrip together. wire transfer only
Is there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
there is a confirmed jane coming on typemachina, we dont know how different it is. thats your best bet at the momentIs there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
im selling my spot to the first offer of 15k, so yuktsi, puddsy and me can take a nice and smooth worldtrip together. wire transfer only
It would be on originatives website but with how they are now it might not be any time soon unfortunatelyIs there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
there is a confirmed jane coming on typemachina, we dont know how different it is. thats your best bet at the momentIs there confirmed B-stock or no? Sorry, I don't feel like scrolling through 15 pages
I am sure you can have a shot at a stock for $2k
im selling my spot to the first offer of 15k, so yuktsi, puddsy and me can take a nice and smooth worldtrip together. wire transfer only
Any clue on when that might be happening or where we can stay tuned for updates? That site is legit like a maze.
Anyone else get an invoice for their boards? Getting kinda antsy this close to GB shipping.Shipping the entire group buy can take a few months. Nothing to worry about just yet. He does them in small batches, normally about a week or two a batch.
Anyone else get an invoice for their boards? Getting kinda antsy this close to GB shipping.Shipping the entire group buy can take a few months. Nothing to worry about just yet. He does them in small batches, normally about a week or two a batch.
Sent from my iPhone using Tapatalk
Anyone else get an invoice for their boards? Getting kinda antsy this close to GB shipping.Shipping the entire group buy can take a few months. Nothing to worry about just yet. He does them in small batches, normally about a week or two a batch.
Sent from my iPhone using Tapatalk
Not so much worried, I just really want to build my board now :(
Show Image(https://i.imgur.com/6P27eZJ.jpg)
in case anyone was still wondering what the production back looks like
Show Image(https://i.imgur.com/69pU8K9.jpg)
oh here's the toblerone as well
sorry for bad pic, not mine
[attach=1]Show Image(https://i.imgur.com/69pU8K9.jpg)
Can't wait to build mine with stock blues 😀
If anyone suddenly changed their minds and decided they don't want their Jane any more, just forward me the shipping invoice and I'll pay it and update the address to save you the hassle. Best deal in the history of deals :thumb:GL fam
Thank you kind sir.If anyone suddenly changed their minds and decided they don't want their Jane any more, just forward me the shipping invoice and I'll pay it and update the address to save you the hassle. Best deal in the history of deals :thumb:GL fam
If anyone suddenly changed their minds and decided they don't want their Jane any more, just forward me the shipping invoice and I'll pay it and update the address to save you the hassle. Best deal in the history of deals :thumb:GL fam
Sent from my iPhone using Tapatalk
If anyone suddenly changed their minds and decided they don't want their Jane any more, just forward me the shipping invoice and I'll pay it and update the address to save you the hassle. Best deal in the history of deals :thumb:GL fam
Sent from my iPhone using Tapatalk
That is quite the reach. I'll just cover your shopping and cost of the board...
Lots of people waiting for that blue to be done. Might be a while before it's on the way
Received mine. Amazing board, TGR boards have the softest feeling, like velvet.
Extremely nice for my first TKL. Thanks Yuktsi! :)Show Image(https://i.imgur.com/NeP5jRu.jpg)
More pics:
https://imgur.com/a/Q4xCO99 (https://imgur.com/a/Q4xCO99)
Received mine. Amazing board, TGR boards have the softest feeling, like velvet.
Extremely nice for my first TKL. Thanks Yuktsi! :)Show Image(https://i.imgur.com/NeP5jRu.jpg)
More pics:
https://imgur.com/a/Q4xCO99 (https://imgur.com/a/Q4xCO99)
sign me up
queue more people asking to buy slots for gb price
sign me up
queue more people asking to buy slots for gb price
Received mine. Amazing board, TGR boards have the softest feeling, like velvet.
Extremely nice for my first TKL. Thanks Yuktsi! :)Show Image(https://i.imgur.com/NeP5jRu.jpg)
More pics:
https://imgur.com/a/Q4xCO99 (https://imgur.com/a/Q4xCO99)
Oof can't wait for blue grey to come in!
Wtb mustard janeOof can't wait for blue grey to come in!
I'm pretty sure even PUKE or MUSTARD color would look amazing from TGR. Those photos ease the buyer's remorse when lookin at my bank statement.
Oof can't wait for blue grey to come in!
I'm pretty sure even PUKE or MUSTARD color would look amazing from TGR. Those photos ease the buyer's remorse when lookin at my bank statement.
I'll pay to have a box of air yuktsi breathes shipped to Boston. Hell I'll change my last name to TGR and name my son 910 if he wants me to.
I'm pretty sure even PUKE or MUSTARD color would look amazing from TGR.
I'll pay to have a box of air yuktsi breathes shipped to Boston. Hell I'll change my last name to TGR and name my son 910 if he wants me to.
I'm pretty sure even PUKE or MUSTARD color would look amazing from TGR.
Wtb mustard janeOof can't wait for blue grey to come in!
I'm pretty sure even PUKE or MUSTARD color would look amazing from TGR. Those photos ease the buyer's remorse when lookin at my bank statement.
Sent from my iPhone using Tapatalk
Hope r3 is coming soon.Maybe in a couple years.
Jane is really elegant,attractive and easy for most of people to use(I love 80%).
Please consider the wave weight this time. So pretty on IG.
Dark Gray shipping invoice soon pls :pray:
Dark Gray shipping invoice soon pls :pray:
Ditto.
Afaik there is no yuktsi discord channel, he just hangs out in the Kb-kustoms channel quite regularly
Hmm anybody out there want to trade a wkl jane for a Pink 910 CE? It's got one built (I can easily desolder if desired) and one unbuilt plate+pcb.
Is the shipping going out in batches?Ya also depends on what colour you chose
Is the shipping going out in batches?Ya also depends on what colour you chose
Sent from my iPhone using Tapatalk
By any chance does anyone know the name of that keycap set in the first image with the black keys and the green blue and red modifiers?I think it's gmk white on black or a variant of WoB with desko RGB modifiers
I can haz shipping invoice? pleaz? I haz dark gray.
Does Sam generally provide tracking or does it just come some time after invoice is paid?You pay the shipping
Does Sam generally provide tracking or does it just come some time after invoice is paid?You pay the shipping
He ships
You get tracking
Jane arrives!
Sent from my iPhone using Tapatalk
anyone else receive theirs yet? would love to see more pics
anyone else receive theirs yet? would love to see more pics
Did mine up over the past week.
(https://i.imgur.com/QYKliWA.jpg) (https://imgur.com/a/PbjVg3o)
• Grey TGR Jane v2
• Zealios with gold-plated 78g SPRiT springs
• Clear polycarbonate switch films from Kin
• Lubed with Krytox 103 (switch) and Krytox 205 (stabs)
• 3mm flangeless white LEDs
• Currently dressed up in GMK Oblivion v1
Damn that is stunning!
The grey pairs so well with GMK Oblivion. Can't wait to see more (you should share more pics)
anyone else receive theirs yet? would love to see more pics
Did mine up over the past week.
(https://i.imgur.com/QYKliWA.jpg) (https://imgur.com/a/PbjVg3o)
• Grey TGR Jane v2
• Zealios with gold-plated 78g SPRiT springs
• Clear polycarbonate switch films from Kin
• Lubed with Krytox 103 (switch) and Krytox 205 (stabs)
• 3mm flangeless white LEDs
• Currently dressed up in GMK Oblivion v1
Those are some large LEDs -- you don't have issues with clearance and/or clacking from the Cherry profile caps?
Do you see a noticeable difference from using clear polycarbonate films on Zealios?
Those are some large LEDs -- you don't have issues with clearance and/or clacking from the Cherry profile caps?
No clearance issues. I tested them with different profile keycaps thoroughly before soldering.Do you see a noticeable difference from using clear polycarbonate films on Zealios?
Honestly there's no difference / improvement. I just put them in for kicks.
anyone else receive theirs yet? would love to see more pics
Did mine up over the past week.
(https://i.imgur.com/QYKliWA.jpg) (https://imgur.com/a/PbjVg3o)
• Grey TGR Jane v2
• Zealios with gold-plated 78g SPRiT springs
• Clear polycarbonate switch films from Kin
• Lubed with Krytox 103 (switch) and Krytox 205 (stabs)
• 3mm flangeless white LEDs
• Currently dressed up in GMK Oblivion v1
I'm pretty sure there's guaranteed contract on home row when using 3mm and 2x3x4 with thick cherry profile caps. 1.8mm is kind of the only way to avoid it.Those are some large LEDs -- you don't have issues with clearance and/or clacking from the Cherry profile caps?
No clearance issues. I tested them with different profile keycaps thoroughly before soldering.Do you see a noticeable difference from using clear polycarbonate films on Zealios?
Honestly there's no difference / improvement. I just put them in for kicks.
Hm, neat! Normally the home row tends to clack a little more with the LEDs.
Figured as much about the films. Nice build, once again!
I'm pretty sure there's guaranteed contract on home row when using 3mm and 2x3x4 with thick cherry profile caps
1.8mm is kind of the only way to avoid it
Incredible looking board and keycap combo though o.o
Ah that is interesting, I didn't know they had shorter ones. Are they called anything different?I'm pretty sure there's guaranteed contract on home row when using 3mm and 2x3x4 with thick cherry profile caps
Some 3mm LEDs are shorter than others, (https://i.imgur.com/bacGBb0.jpg) you just have to pick the right ones1.8mm is kind of the only way to avoid it
I do have a bunch here but they are inconsistent in terms of color temperature :(Incredible looking board and keycap combo though o.o
Thanks! :)
Guess it's not by color. I got dark gray and i still don't have a shipping invoice :(
Where are the Blue Grey ones :eek:Last
Only the raw ones. Rest is all in the batches.Guess it's not by color. I got dark gray and i still don't have a shipping invoice :(
some people got theirs ahead of the rest of the GB
Do you have any spare keyboards?
I'd like to buy it.
Is it too late?
GOT AN INVOICE!
So, what switches are you guys saving up for this build? I'm liking these Gateron Ink switches.
I am working through modding a set of FEI switches for my build with a partial plate. I am hoping that the green of the PCB looks good with the switches. Either way the switches tune nicely and I am looking forward to the build.
Can't wait to get my invoice for shipping!
Yeah, the FEI are nice. A bit scratchy, but a solid switch.
Yeah, the FEI are nice. A bit scratchy, but a solid switch.
I swapped the springs for 62G spirits and Tribosys 3204 with Outemu switch tops and they feel great to me. The tops also reduce the wobble significantly.
I didn’t get a spot but invoice me lord yuksti!You can buy one for the low price of 3500 !!!!!!!!
I didn’t get a spot but invoice me lord yuksti!You can buy one for the low price of 3500 !!!!!!!!
anyone else receive theirs yet? would love to see more pics
Did mine up over the past week.
(https://i.imgur.com/QYKliWA.jpg) (https://imgur.com/a/PbjVg3o)
• Grey TGR Jane v2
• Zealios with gold-plated 78g SPRiT springs
• Clear polycarbonate switch films from Kin
• Lubed with Krytox 103 (switch) and Krytox 205 (stabs)
• 3mm flangeless white LEDs
• Currently dressed up in GMK Oblivion v1
Damn that is stunning!
The grey pairs so well with GMK Oblivion. Can't wait to see more (you should share more pics)
Wow very nice :thumb: Yuktsi's blue gray makes the decision of picking between gray or blue gray harder than ever if your preference is a darker shade of color. Very happy with gray myself but the blue gray does look insanely good! I honestly think all colors look equally good across the board. Just boils down to preference. Jane v2 is just the pinnacle of mechanical keyboard - true symbol of perfection.Show Image(https://i.imgur.com/azeUFkg.jpg)
I've got my tracking number but it doesn't say which courier services have been used?
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
Dude, I love this!
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?So sorry about that, just dmed you. Let me know.
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?So sorry about that, just dmed you. Let me know.
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
I've just received mine. Damn, I've got the wrong combo and it's ****ing flawless and perfect :) I ordered cyan bottom and grey top. This is amazing. It's the best keyboard I've got. I wanted to dress it in the SA Pulse with the Noire kit. Now I'm not sure what to do? Do you think the all black Noire and Pulse alphas is a good colour match with the top?Show Image(https://i.imgur.com/WXSBRyY.jpg)Show Image(https://i.imgur.com/3ZpRzDE.jpg)Show Image(https://i.imgur.com/uC9hCNf.jpg)Show Image(https://i.imgur.com/ziLomvs.jpg)
Just fyi, I can always use a second Jane :cool:. Let me take care of your regret :))
Looks amazing, grey on cyan was my runner up choice and now I'm worried I made the wrong decision! :eek:
Anyone knows when en.zfrontier start to ship
Anyone knows when en.zfrontier start to shiprofl
Received my gray Jane yesterday. This thing is a beauty -- I'll share more photos when I have it built.Show Image(https://i.imgur.com/ua4byQp.jpg)
Hey, did anyone have to pay an import fee from UPS before they delivered?
Hey, did anyone have to pay an import fee from UPS before they delivered?
Hey, did anyone have to pay an import fee from UPS before they delivered?
Nope, I've gotten a few Aramex shipments that were delivered by UPS in the US (from TGR and SINGA) and have never gotten any sort of import fees.
Hey, did anyone have to pay an import fee from UPS before they delivered?
Nope, I've gotten a few Aramex shipments that were delivered by UPS in the US (from TGR and SINGA) and have never gotten any sort of import fees.
I'm in the US, California specifically, and I had to pay a 40 dollar import fee... This isn't normal?
Received my gray Jane yesterday. This thing is a beauty -- I'll share more photos when I have it built.Show Image(https://i.imgur.com/ua4byQp.jpg)
The gray is perfect, right?
The only issue I have is the weight on the back. It's shiny, but certainly not quite the mirror finish like the M60-A back. I can still see a lot of lines from the polishing. Maybe it's just the difference between polished SS and PVD coating? It's not a deal-breaker or anything. Just making sure they are all that way ;)
Sorry, the weight is hand polished, not PVD or coated with anything. The highly reflective mirror finish is created by continuing the progression of finer abrasives and adding in a polishing compound, the process is extremely labor-intensive and time-consuming. Thus, the micro lines on the weight were accepted. While it's more prone to flaws and scratches, that's why the bigger backplate is matte finished.Received my gray Jane yesterday. This thing is a beauty -- I'll share more photos when I have it built.Show Image(https://i.imgur.com/ua4byQp.jpg)
The gray is perfect, right?
The only issue I have is the weight on the back. It's shiny, but certainly not quite the mirror finish like the M60-A back. I can still see a lot of lines from the polishing. Maybe it's just the difference between polished SS and PVD coating? It's not a deal-breaker or anything. Just making sure they are all that way ;)
Sorry, the weight is hand polished, not PVD or coated with anything. The highly reflective mirror finish is created by continuing the progression of finer abrasives and adding in a polishing compound, the process is extremely labor-intensive and time-consuming. Thus, the micro lines on the weight were accepted. While it's more prone to flaws and scratches, that's why the bigger backplate is matte finished.Received my gray Jane yesterday. This thing is a beauty -- I'll share more photos when I have it built.Show Image(https://i.imgur.com/ua4byQp.jpg)
The gray is perfect, right?
The only issue I have is the weight on the back. It's shiny, but certainly not quite the mirror finish like the M60-A back. I can still see a lot of lines from the polishing. Maybe it's just the difference between polished SS and PVD coating? It's not a deal-breaker or anything. Just making sure they are all that way ;)
Personally, I like the better touch from the bare stainless steel and don't need to worry about the durability of the coating. You can always further enhance the surface with polishing compound.
Sorry, the weight is hand polished, not PVD or coated with anything. The highly reflective mirror finish is created by continuing the progression of finer abrasives and adding in a polishing compound, the process is extremely labor-intensive and time-consuming. Thus, the micro lines on the weight were accepted. While it's more prone to flaws and scratches, that's why the bigger backplate is matte finished.Received my gray Jane yesterday. This thing is a beauty -- I'll share more photos when I have it built.Show Image(https://i.imgur.com/ua4byQp.jpg)
The gray is perfect, right?
The only issue I have is the weight on the back. It's shiny, but certainly not quite the mirror finish like the M60-A back. I can still see a lot of lines from the polishing. Maybe it's just the difference between polished SS and PVD coating? It's not a deal-breaker or anything. Just making sure they are all that way ;)
Personally, I like the better touch from the bare stainless steel and don't need to worry about the durability of the coating. You can always further enhance the surface with polishing compound.
Built with spring-lubed only tealios (tub lubed springs with 3204 and even extra added to the base of each spring), and lubed zeal stabilizers.
Typing feels and sounds out-of-this-world amazing. F row and number row still a bit more firm than the home row, but much closer than other boards I have.
Here's a potato pic. Not keeping blue alert on it, but it was the fist set I picked out of the pile for testing, and... R5 master race? Going to try out muted, miami nights, led zep, and 9009 later.
(Attachment Link)
Built with spring-lubed only tealios (tub lubed springs with 3204 and even extra added to the base of each spring), and lubed zeal stabilizers.
Typing feels and sounds out-of-this-world amazing. F row and number row still a bit more firm than the home row, but much closer than other boards I have.
Here's a potato pic. Not keeping blue alert on it, but it was the fist set I picked out of the pile for testing, and... R5 master race? Going to try out muted, miami nights, led zep, and 9009 later.
(Attachment Link)
Built with spring-lubed only tealios (tub lubed springs with 3204 and even extra added to the base of each spring), and lubed zeal stabilizers.
Typing feels and sounds out-of-this-world amazing. F row and number row still a bit more firm than the home row, but much closer than other boards I have.
Here's a potato pic. Not keeping blue alert on it, but it was the fist set I picked out of the pile for testing, and... R5 master race? Going to try out muted, miami nights, led zep, and 9009 later.
(Attachment Link)
Wow, that looks stunning. Out of curiosity, why only spring lubed? Also, how much do you use for the tub lubing?
Built with spring-lubed only tealios (tub lubed springs with 3204 and even extra added to the base of each spring), and lubed zeal stabilizers.
Typing feels and sounds out-of-this-world amazing. F row and number row still a bit more firm than the home row, but much closer than other boards I have.
Here's a potato pic. Not keeping blue alert on it, but it was the fist set I picked out of the pile for testing, and... R5 master race? Going to try out muted, miami nights, led zep, and 9009 later.
(Attachment Link)
Looks amazing!
Built with spring-lubed only tealios (tub lubed springs with 3204 and even extra added to the base of each spring), and lubed zeal stabilizers.
Typing feels and sounds out-of-this-world amazing. F row and number row still a bit more firm than the home row, but much closer than other boards I have.
Here's a potato pic. Not keeping blue alert on it, but it was the fist set I picked out of the pile for testing, and... R5 master race? Going to try out muted, miami nights, led zep, and 9009 later.
(Attachment Link)
Wow, that looks stunning. Out of curiosity, why only spring lubed? Also, how much do you use for the tub lubing?
Tealios felt a bit too sluggish to me when I lubed the stem or the housing. Just my personal preference. I have a preference for smooth but non-lubed switches lately. Lubed the springs really well to ensure no ping or crunch down the road (since plate doesn't allow for top opening). I probably used around 1/2 an ounce or less in a small container for tub lube. That coated everything pretty well, but I decided to add a bit more to the bottom few coils of each one by hand.
Then I went through some sound tests 1 by 1 to cherry pick the best sounding/feeling switches for the space bar and alphas. I've found that tealios are fairly consistent, but I did have some that sounded a little scratchy. I'm sure it would clear up some with 3203, but I've just been going stock lately (just a phase, I guess). I put the scratchy ones in a pile for the F keys and other non-alphas. The best of the best was set aside for the spacebar. I had 4 or 5 that had a strange tactile thing happen on slow press. Opened them up, flipped the spring, and all seemed well again.
Anyway, if you are debating on what to use for your Jane v2 build, I can say without a doubt that you will not regret using linear switches. I know people rave about tactile on plates with more give, but linears feel fantastic as well.
Jane received - more pics here (https://geekhack.org/index.php?topic=35864.msg2731533#msg2731533)
(Attachment Link)
Jane received - more pics here (https://geekhack.org/index.php?topic=35864.msg2731533#msg2731533)
(Attachment Link)
Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Pretty stunning. I hate your flipped space bar. Deal with it :cool:
Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Pretty stunning. I hate your flipped space bar. Deal with it :cool:
I do that (flipped space) too. Haha
[attach=1]Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Pretty stunning. I hate your flipped space bar. Deal with it :cool:
I do that (flipped space) too. Haha
That's it. I'm not joining your GB now.
Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Pretty stunning. I hate your flipped space bar. Deal with it :cool:
I do that (flipped space) too. Haha
That's it. I'm not joining your GB now.
(Attachment Link)Didn't take the best picture but this is my Jane built up with Holy GSUS lubed with 3203 and 72g CWW springs and GMK Olivia.
Pretty stunning. I hate your flipped space bar. Deal with it :cool:
I do that (flipped space) too. Haha
That's it. I'm not joining your GB now.
Triggered yet?
>only flipping one keyShow Image(https://i.imgur.com/Pj0IhvD.jpg)
>only flipping one keyShow Image(https://i.imgur.com/Pj0IhvD.jpg)
I'm going to be sick
>only flipping one keyShow Image(https://i.imgur.com/Pj0IhvD.jpg)
>only flipping one keyShow Image(https://i.imgur.com/Pj0IhvD.jpg)
That hair :p
Where's your cable from puddsy?
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
Damn that looks amazing! What did you build it with?
Got my shipping invoice 2 weeks ago and paid the same day, still no shipping notification, germany btw. Any EU people already got theirs?
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
That **** is beautiful. The kinda keyboard make you forget all about all them other keyboards. Make you feel like this is the one keyboard you just wanna type on it everyday forever n ever. N everything you type just feels so right y'know. N you just can't wait everyday to get home and put your hands all over it. N you're staying in at weekends just typing sweet nothings on it all night. Just to type. **** is beautiful.
Oh. My.
(Attachment Link)
(Attachment Link)
P.S.
Can someone run Muted again, please? I need more than one set :)
is this the dark gray jane 2?
a good alternative to muted is the GMK Classic Retro, but the accents are different, or 9009. Classic Retro is readily available, though.
Lubed and sip-socketed 78g Zealios V2 and waiting for GMK HyperFuse RemixShow Image(https://i.imgur.com/vm8KO71.jpg)Show Image(https://i.imgur.com/xyvBALJ.jpg)Show Image(https://i.imgur.com/3h7CDWP.jpg)
Lubed and sip-socketed 78g Zealios V2 and waiting for GMK HyperFuse RemixShow Image(https://i.imgur.com/vm8KO71.jpg)Show Image(https://i.imgur.com/xyvBALJ.jpg)Show Image(https://i.imgur.com/3h7CDWP.jpg)
I'm just kidding. Although I think it looks silly, I understand that it is more comfortable for some people while typing. I personally have a large keyboard shelf on my desk that is quite low, so I don't rest my palms on the desktop... therefore flipped space doesn't work for me. Actually, it caused the opposite effect for me.
Finished building mine today. Very excited about it.Show Image(http://arslock.com/wp-content/uploads/2019/03/ARSLOCK-JANE-ALICE-1024x870.png)
Have this leopold pbt + some OG double shots to fill out the rest until Modern Dolch ships.
switches are vintage blacks, lubed by me with 205g, 68g sprit springs and films.
Finished building mine today. Very excited about it.Show Image(http://arslock.com/wp-content/uploads/2019/03/ARSLOCK-JANE-ALICE-1024x870.png)
Have this leopold pbt + some OG double shots to fill out the rest until Modern Dolch ships.
switches are vintage blacks, lubed by me with 205g, 68g sprit springs and films.
Finished building mine today. Very excited about it.Show Image(http://arslock.com/wp-content/uploads/2019/03/ARSLOCK-JANE-ALICE-1024x870.png)
Have this leopold pbt + some OG double shots to fill out the rest until Modern Dolch ships.
switches are vintage blacks, lubed by me with 205g, 68g sprit springs and films.
Finished building mine today. Very excited about it.Show Image(http://arslock.com/wp-content/uploads/2019/03/ARSLOCK-JANE-ALICE-1024x870.png)
Have this leopold pbt + some OG double shots to fill out the rest until Modern Dolch ships.
switches are vintage blacks, lubed by me with 205g, 68g sprit springs and films.
Very nice
Any blue gray updates? :D
Well look who's here
(Attachment Link)
Well look who's here
(Attachment Link)
Well look who's herelove this red
(Attachment Link)
Well look who's here
(Attachment Link)
Well look who's here
(Attachment Link)
Can confirm. Red is very nice :thumb:
ne extras avail
Show Image(https://farm8.staticflickr.com/7853/47388527231_0b4b28c11e_o.jpg)
Show Image(https://farm8.staticflickr.com/7853/47388527231_0b4b28c11e_o.jpg)
she pink
have you seen a pink alice, how close are the two?
Show Image(https://farm8.staticflickr.com/7853/47388527231_0b4b28c11e_o.jpg)
she pink
have you seen a pink alice, how close are the two?
Purple
Show Image(https://farm8.staticflickr.com/7853/47388527231_0b4b28c11e_o.jpg)
she pink
have you seen a pink alice, how close are the two?
Purple
looks like my pink alice, furthering my want to cerakote it
but pretty board nonetheless
Show Image(https://farm8.staticflickr.com/7853/47388527231_0b4b28c11e_o.jpg)
she pink
have you seen a pink alice, how close are the two?
Purple
looks like my pink alice, furthering my want to cerakote it
but pretty board nonetheless
My 910 divides its time between being purple and pink, depending on the weather, or its mood. Alice less so, she's more resolutely purple, but very far from blurple. Interested to see how Jane fits in when she arrives. I think her flight is in a few days.
fresh blaugrau leeksShow Image(https://i.imgur.com/vah8tZi.jpg)
Ooh, exciting to see the winkey versions starting to surface
Going on 4 years and still no TGR board in my collection. One day you shall be mine, one day................
Going on 4 years and still no TGR board in my collection. One day you shall be mine, one day................
Well, that's odd.
More glams
(Attachment Link)
(Attachment Link)
More glams
(Attachment Link)
(Attachment Link)
More glams
(Attachment Link)
(Attachment Link)
More glams
(Attachment Link)
(Attachment Link)
More glams
(Attachment Link)
(Attachment Link)
god damn that is pretty
i don't regret skipping this GB but i am certainly enjoying the pictures from it
More glams
(Attachment Link)
(Attachment Link)
More glams
(Attachment Link)
(Attachment Link)
god damn that is pretty
i don't regret skipping this GB but i am certainly enjoying the pictures from it
*i don't regret not beating 41 seconds :(
Will we get tracking info after the shipping invoice?
Will we get tracking info after the shipping invoice?
yes, Yuktsi updates tracking via paypal after he ships. Check your invoice in paypal as sometimes they fail to send an email
salamat, kapitan!
any news on blue-grey cases shipping?
Show Image(https://i.redd.it/u74vmm5h9ao21.jpg)
Show Image(https://i.redd.it/u74vmm5h9ao21.jpg)
Show Image(https://i.redd.it/u74vmm5h9ao21.jpg)
Show Image(https://i.redd.it/u74vmm5h9ao21.jpg)
Impatient for Jane Bleu so I made these ****ty templatesPeacock best
StrikerShow Image(https://i.imgur.com/c725iQo.jpg)
WOBShow Image(https://i.imgur.com/XUlahRb.jpg)
Classic BeigeShow Image(https://i.imgur.com/BJT1BmP.jpg)
CRP DeskoShow Image(https://i.imgur.com/iNz32Kx.jpg)
CRP PeacockShow Image(https://i.imgur.com/wtCqqd1.jpg)
Any updates on the Blue Gray? I haven't had any free time to catch up. Home renovation with zero experience :DDD
Received the Jane and it is the best keyboard I have ever seen. Unfortunately the red isn't to my liking.
As such, I am trading the red V2 for dark grey V2 or a TI grey V1(WKL or not).
If it's not cool to post here, please let me know and I will edit the post.
(Attachment Link)
“I want to trade my red Jane v2 so here a picture of it with a red Supreme something to prove i’m serious”Received the Jane and it is the best keyboard I have ever seen. Unfortunately the red isn't to my liking.
As such, I am trading the red V2 for dark grey V2 or a TI grey V1(WKL or not).
If it's not cool to post here, please let me know and I will edit the post.
(Attachment Link)
picture is a gigantic flex
Any EU people, in particular germany, already got their janes? Mines stuck somewhere between Malaysia and Germany for 14 days now with no update on tracking, just trying to figure out if its customs or something else. Feelsbadman.
Any EU people, in particular germany, already got their janes? Mines stuck somewhere between Malaysia and Germany for 14 days now with no update on tracking, just trying to figure out if its customs or something else. Feelsbadman.
I got mine 2,5 weeks ago in Berlin, Germany. It went straight to customs in my case. No Aramex custom declaration this time.
Any EU people, in particular germany, already got their janes? Mines stuck somewhere between Malaysia and Germany for 14 days now with no update on tracking, just trying to figure out if its customs or something else. Feelsbadman.
I got mine 2,5 weeks ago in Berlin, Germany. It went straight to customs in my case. No Aramex custom declaration this time.
My Jane just got in yesterday! Paid shipping about 8 days ago, received tracking 5 days ago. Very happy with how it turned out. Planning to build it up over the weekend with either brown alps or FEI switches.
Here's a color comparison between the Purple Jane and Pink Alice:Show Image(https://i.imgur.com/H1MgV40.jpg)
The purple in the photo is more saturated than in real life by a tad. Hard to capture the color properly with just my phone camera.
Any EU people, in particular germany, already got their janes? Mines stuck somewhere between Malaysia and Germany for 14 days now with no update on tracking, just trying to figure out if its customs or something else. Feelsbadman.
I got mine 2,5 weeks ago in Berlin, Germany. It went straight to customs in my case. No Aramex custom declaration this time.
Weird, was it somehow stuck in tracking? The last event was "The shipment will be transported to the destination country and, from there, handed over to the delivery organization." which is now 15 days ago. It will probably just appear here or I'll get a letter from customs. I wasn't really worried by now, as 10-14 days could be quite normal if it's stuck somewhere in Frankfurt.
Who delivered it? DHL?
My Jane just got in yesterday! Paid shipping about 8 days ago, received tracking 5 days ago. Very happy with how it turned out. Planning to build it up over the weekend with either brown alps or FEI switches.
Here's a color comparison between the Purple Jane and Pink Alice:Show Image(https://i.imgur.com/H1MgV40.jpg)
The purple in the photo is more saturated than in real life by a tad. Hard to capture the color properly with just my phone camera.
My Jane just got in yesterday! Paid shipping about 8 days ago, received tracking 5 days ago. Very happy with how it turned out. Planning to build it up over the weekend with either brown alps or FEI switches.
Here's a color comparison between the Purple Jane and Pink Alice:Show Image(https://i.imgur.com/H1MgV40.jpg)
The purple in the photo is more saturated than in real life by a tad. Hard to capture the color properly with just my phone camera.
My Jane just got in yesterday! Paid shipping about 8 days ago, received tracking 5 days ago. Very happy with how it turned out. Planning to build it up over the weekend with either brown alps or FEI switches.
Here's a color comparison between the Purple Jane and Pink Alice:Show Image(https://i.imgur.com/H1MgV40.jpg)
The purple in the photo is more saturated than in real life by a tad. Hard to capture the color properly with just my phone camera.
purple is so nice
Any plans for R2? Also, would happily buy a grey Jane if anyone decides to sell.
Show Image(https://farm8.staticflickr.com/7843/46801427114_4b9bfb7730_k.jpg)Show Image(https://farm8.staticflickr.com/7802/47525084571_8ae2f858c3_k.jpg)
Show Image(https://farm8.staticflickr.com/7843/46801427114_4b9bfb7730_k.jpg)Show Image(https://farm8.staticflickr.com/7802/47525084571_8ae2f858c3_k.jpg)
Show Image(https://farm8.staticflickr.com/7843/46801427114_4b9bfb7730_k.jpg)Show Image(https://farm8.staticflickr.com/7802/47525084571_8ae2f858c3_k.jpg)
I was told my Jane v2 would get shipped soon. Let the waiting game begins :eek:Every time I look at your signature... :eek:
That is an amazing shade of purple :OShow Image(https://farm8.staticflickr.com/7843/46801427114_4b9bfb7730_k.jpg)Show Image(https://farm8.staticflickr.com/7802/47525084571_8ae2f858c3_k.jpg)
(Attachment Link)
(Attachment Link)
Blue Gray's haven't been released yet right?
(Attachment Link)
if one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
if one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
why the bottom one looks bigger? just photography perspective or what?
(Attachment Link)
(Attachment Link)Keeping it classy like 910 R1 with dem dual tones I see ;)
I haven't gotten an invoice yet :(
And Yuktsi didn't respond to my email last week. What is the best way to get in touch with him? Does anyone else with a blue grey Jane know if they have started shipping yet?
I haven't gotten an invoice yet :(
And Yuktsi didn't respond to my email last week. What is the best way to get in touch with him? Does anyone else with a blue grey Jane know if they have started shipping yet?
if one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
I prefer WKL for aesthetic reasonsif one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
finally someone w/ a keyboard that must actually use it for work. i don't understand going without a winkey.
no one will admit they just prefer WKL for aesthetic reasons
I prefer WKL for aesthetic reasonsif one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
finally someone w/ a keyboard that must actually use it for work. i don't understand going without a winkey.
no one will admit they just prefer WKL for aesthetic reasons
Sent from my SM-G950U1 using Tapatalk
(Attachment Link)
Glamour shot.
Got my Jane yesterday and built it up, loving it so far. These are the 2 options I had on it, NCR Dyesubs and HFO, liking HFO more atm. Thanks Yuktsi for such a nice board.
(Attachment Link) (Attachment Link)
Just received and paid my shipping invoice for Gray Winkey. Hype is real
is there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
is there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
Yuktsi posts all of his interest checks on Geekhack.
People also interact with him on the MechKeys discord (the invite can be found on the Reddit r/mechanicalkeyboards sidebar). Specifically on kb-kustoms.
is there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
Yuktsi posts all of his interest checks on Geekhack.
People also interact with him on the MechKeys discord (the invite can be found on the Reddit r/mechanicalkeyboards sidebar). Specifically on kb-kustoms.
yeah but then you have to be in kb-kustoms so really who wins there
is there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
Yuktsi posts all of his interest checks on Geekhack.
People also interact with him on the MechKeys discord (the invite can be found on the Reddit r/mechanicalkeyboards sidebar). Specifically on kb-kustoms.
yeah but then you have to be in kb-kustoms so really who wins there
oofis there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
Yuktsi posts all of his interest checks on Geekhack.
People also interact with him on the MechKeys discord (the invite can be found on the Reddit r/mechanicalkeyboards sidebar). Specifically on kb-kustoms.
yeah but then you have to be in kb-kustoms so really who wins there
Everyone, because you’re not there
oofis there a TGR discord or anything where I can stay in the loop for future TGR GBs?Not really.
Yuktsi posts all of his interest checks on Geekhack.
People also interact with him on the MechKeys discord (the invite can be found on the Reddit r/mechanicalkeyboards sidebar). Specifically on kb-kustoms.
yeah but then you have to be in kb-kustoms so really who wins there
Everyone, because you’re not there
if one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
finally someone w/ a keyboard that must actually use it for work. i don't understand going without a winkey.
no one will admit they just prefer WKL for aesthetic reasons
I prefer WKL for aesthetic reasonsif one not enoughShow Image(https://media.discordapp.net/attachments/312287977151660042/563195521808728074/image0.jpg?width=840&height=630)
finally someone w/ a keyboard that must actually use it for work. i don't understand going without a winkey.
no one will admit they just prefer WKL for aesthetic reasons
Sent from my SM-G950U1 using Tapatalk
lol, alright then.
don't want this to devolve into a WKL fight, wasn't trying to bait. but I think that was the first picture I saw that wasn't WKL. surprising to me.
Got my Jane yesterday and built it up, loving it so far. These are the 2 options I had on it, NCR Dyesubs and HFO, liking HFO more atm. Thanks Yuktsi for such a nice board.
(Attachment Link) (Attachment Link)
Got my Jane yesterday and built it up, loving it so far. These are the 2 options I had on it, NCR Dyesubs and HFO, liking HFO more atm. Thanks Yuktsi for such a nice board.
(Attachment Link) (Attachment Link)
so good. is this blue grey?
Got my Jane yesterday and built it up, loving it so far. These are the 2 options I had on it, NCR Dyesubs and HFO, liking HFO more atm. Thanks Yuktsi for such a nice board.
(Attachment Link) (Attachment Link)
so good. is this blue grey?
Awh shiet. Just paid my blue-gray shipping invoice :DDDOooooof I can't wait.
Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
Caps lock = winkey
Caps lock = winkeyShow Image(https://media.giphy.com/media/l4FGuhL4U2WyjdkaY/giphy.gif)
Capslock = Function
Caps lock = winkeyShow Image(https://media.giphy.com/media/l4FGuhL4U2WyjdkaY/giphy.gif)
Capslock = Function
Tbh best is HHKB-like
Caps Lock --> Control
Left Ctrl --> Win/OS
Right Alt or Scroll Lock as Fn
I basically do this. Right alt = Fn for my music controls, Right Ctrl = Winkey, and Caps lock is main Fn key for all other fns like F keys.Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
I basically do this. Right alt = Fn for my music controls, Right Ctrl = Winkey, and Caps lock is main Fn key for all other fns like F keys.Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
I basically do this. Right alt = Fn for my music controls, Right Ctrl = Winkey, and Caps lock is main Fn key for all other fns like F keys.Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
Ok this is me:
R alt = winkey
R ctrl = fn
Capslock = backspace (I use colemak)
Fn + capslock = capslock
I feel like I should do the capslock = ctrl thing but I’m too used to this now. What. Ever.
I basically do this. Right alt = Fn for my music controls, Right Ctrl = Winkey, and Caps lock is main Fn key for all other fns like F keys.Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
Ok this is me:
R alt = winkey
R ctrl = fn
Capslock = backspace (I use colemak)
Fn + capslock = capslock
I feel like I should do the capslock = ctrl thing but I’m too used to this now. What. Ever.
I basically do this. Right alt = Fn for my music controls, Right Ctrl = Winkey, and Caps lock is main Fn key for all other fns like F keys.Awh shiet. Just paid my blue-gray shipping invoice :DDDWk or wkl?
WINKEY > ALL. Win+D, Win+E, Win+R... win. Plus the countless keyboard shortcuts I utilize via programming. <3
Edit; I know this isn't a popular opinion in the keyboard community. But I love my winkey.
I know this ground has been trodden plenty of times but I just map winkey to the right alt. I love the winkey but I also love WKL aesthetic. Each to their own tho of course.
Ok this is me:
R alt = winkey
R ctrl = fn
Capslock = backspace (I use colemak)
Fn + capslock = capslock
I feel like I should do the capslock = ctrl thing but I’m too used to this now. What. Ever.
What do you program Backspace and the other keys to? I see you still build the board in a standard layout even though you use Colemak (and stepped caps key to boot for what would be backspace!!). I use split backspace on every board I own, and I am apprehensive to build my Jane with it due to all the backlash split bs gets on TKLs. I will do it anyways cause it's my board, but still.
While we all look forward to seeing these blue grey Janes start to appear here’s some pics of my purple one I built last week (x-post from GH media Korean board thread so sue me):Show Image(https://live.staticflickr.com/65535/47629614652_b144250dd3_k.jpg)Show Image(https://live.staticflickr.com/65535/47632030752_c8859b286e_k.jpg)Show Image(https://live.staticflickr.com/65535/32739473047_402c86f7ed_k.jpg)Show Image(https://live.staticflickr.com/65535/40716349413_13221e7e26_k.jpg)Show Image(https://live.staticflickr.com/65535/46766533165_38900ca5fb_k.jpg)Show Image(https://live.staticflickr.com/65535/40716351873_afbe1a3354_k.jpg)
Brass plate
Vint blacks
62g catweewee springs
205g0 on stems
106 on springs
Hot pink switch stickers
GMK Taro
It’s a lovely keyboard to type on, congrats to everyone who got one.
Does anyone know how to fix this issue? My pc and bootmapper client couldn't recognize the board. The LEDs are on but the board is not working at all.Show Image(https://i.imgur.com/zMQqdCj.png)
While we all look forward to seeing these blue grey Janes start to appear here’s some pics of my purple one I built last week (x-post from GH media Korean board thread so sue me):Show Image(https://live.staticflickr.com/65535/47629614652_b144250dd3_k.jpg)Show Image(https://live.staticflickr.com/65535/47632030752_c8859b286e_k.jpg)Show Image(https://live.staticflickr.com/65535/32739473047_402c86f7ed_k.jpg)Show Image(https://live.staticflickr.com/65535/40716349413_13221e7e26_k.jpg)Show Image(https://live.staticflickr.com/65535/46766533165_38900ca5fb_k.jpg)Show Image(https://live.staticflickr.com/65535/40716351873_afbe1a3354_k.jpg)
Brass plate
Vint blacks
62g catweewee springs
205g0 on stems
106 on springs
Hot pink switch stickers
GMK Taro
It’s a lovely keyboard to type on, congrats to everyone who got one.
I paid my shipping invoice on Sunday. How long after did y'all get tracking added to your paypal? I usually have to request packages get held for pickup because I live in SF and my apartment is old without a mailroom haha
So I am new to keyboard building and have a question.
Does TGR Jane kit require you to solder your switches?
Or does the PCB come ready to be hot-swappable for switches?
Thank you
So I am new to keyboard building and have a question.Very little to none of the higher end boards come with the ability to be hot swappable.
Does TGR Jane kit require you to solder your switches?
Or does the PCB come ready to be hot-swappable for switches?
Thank you
So I am new to keyboard building and have a question.
Does TGR Jane kit require you to solder your switches?
Or does the PCB come ready to be hot-swappable for switches?
Thank you
So I am new to keyboard building and have a question.
Does TGR Jane kit require you to solder your switches?
Or does the PCB come ready to be hot-swappable for switches?
Thank you
most people who are spending this much money on a keyboard are generally of the opinion that hotswap isn't that good
not everyone, but those people probably aren't going to be buying a jane in the first place
Anyone still waiting on shipping invoice?
Anyone still waiting on shipping invoice?
Anyone still waiting on shipping invoice?
EDIT: DRUNK COMMENT PLEASE DISREGARD!
Anyone still waiting on shipping invoice?
EDIT: DRUNK COMMENT PLEASE DISREGARD!
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
Anyone still waiting on shipping invoice?
EDIT: DRUNK COMMENT PLEASE DISREGARD!
Woo congrats! I paid mine too but haven't gotten a tracking yet. Hopefully soon!
Edit: woo just got tracking! Any idea what carrier yuktsi uses for us shipping?
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
isn't it bmilcs? it's exactly how i expected the hue to be. heavy baby too.
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
isn't it bmilcs? it's exactly how i expected the hue to be. heavy baby too.
mother****er post pictures
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
isn't it bmilcs? it's exactly how i expected the hue to be. heavy baby too.
mother****er post pictures
You got baited. No one has Blue/Grey
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
isn't it bmilcs? it's exactly how i expected the hue to be. heavy baby too.
mother****er post pictures
You got baited. No one has Blue/Grey
Blue Gray is BELIEVABLE AND ABSOLUTELY PERFECT.
There's no way there's a finer keyboard manufacturer than TGR. I'm 150% blown away with the quality.
isn't it bmilcs? it's exactly how i expected the hue to be. heavy baby too.
mother****er post pictures
You got baited. No one has Blue/Grey
roostercogburn has one
also thanks lightning
Get this up ya!
Get this up ya!
this is very attractive
but what is up with that color difference
Get this up ya!
this is very attractive
but what is up with that color difference
Admittedly, I should have gone with a bigger contrast difference for two tone, like a Cyan top. But the Blue-Grey was too hard to pass up.
Get this up ya!
this is very attractive
but what is up with that color difference
Get this up ya!
this is very attractive
but what is up with that color difference
i had a similar looking effect on my board. i can't tell if it's an illusion or not because at some angles it looks the same and then you can have an angle like the one phatty put up that makes them look different. i didn't post a pic because i can never get the cool shots other people somehow seem to get. if you saw pictures i took, you'd think i hand drew what i think a keyboard looks like.
all in all, very grateful to have had a chance to get this. thanks yuktsi! i, too, am genuinely blow away by the quality of this kit.
Let the boners ensue.Show Image(https://i.imgur.com/rbMa3u9.jpg)Show Image(https://i.imgur.com/5WR5czb.jpg)Show Image(https://i.imgur.com/3YvueaU.jpg)
Let the boners ensue.Show Image(https://i.imgur.com/rbMa3u9.jpg)Show Image(https://i.imgur.com/5WR5czb.jpg)Show Image(https://i.imgur.com/3YvueaU.jpg)
Looks superniceShow Image(https://emoji.tapatalk-cdn.com/emoji24.png)
Sent from my iPhone using Tapatalk
The color is literally perfect. Hey yuktsi. Your product and PACKAGING is unreal. I swear you could drop the custom TGR cardboard box off a 3 story roof and nothing would happen. Maybe the acrylic plate would suffer, but thats about it.
Thank you all for pursuading me to get another PCB combo.
Probably a simple EnjoyPBT set --- 9009 probably.The color is literally perfect. Hey yuktsi. Your product and PACKAGING is unreal. I swear you could drop the custom TGR cardboard box off a 3 story roof and nothing would happen. Maybe the acrylic plate would suffer, but thats about it.
Thank you all for pursuading me to get another PCB combo.
what keyset are you planning?
Probably a simple EnjoyPBT set --- 9009 probably.
On my lunch break and only had time to take a few snapshots. It's really hard to describe how incredible this kit is. I know the buzz word is endgame, but I assure you, for a TKL, I can't fathom a superior product.
Let the boners ensue.Show Image(https://i.imgur.com/rbMa3u9.jpg)Show Image(https://i.imgur.com/5WR5czb.jpg)Show Image(https://i.imgur.com/3YvueaU.jpg)
Probably a simple EnjoyPBT set --- 9009 probably.The color is literally perfect. Hey yuktsi. Your product and PACKAGING is unreal. I swear you could drop the custom TGR cardboard box off a 3 story roof and nothing would happen. Maybe the acrylic plate would suffer, but thats about it.
Thank you all for pursuading me to get another PCB combo.
what keyset are you planning?
Probably a simple EnjoyPBT set --- 9009 probably.
not embarrassing, use real size font
i have jtk on my alice
Modern Dolch completed this build for me:Show Image(http://arslock.com/wp-content/uploads/2019/05/ARSLOCK-JANE-MODERN-DOLCH-1024x441.png)Show Image(http://arslock.com/wp-content/uploads/2019/05/unknown-24-1024x654.png)
I put some Royal Alpha keys on it just to make it more unique.
I've modded or built at least a dozen keyboards by now and still pry each switch open by hand to lube. Is there a better, inexpensive/diy way to achieve the same results?
If I wasn't consumed by working full time then bed/bath renovation until bedtime, I'd be done by now.
I've modded or built at least a dozen keyboards by now and still pry each switch open by hand to lube. Is there a better, inexpensive/diy way to achieve the same results?
If I wasn't consumed by working full time then bed/bath renovation until bedtime, I'd be done by now.
This was a lot of fun. If anyone has a spare Round 6 R4 1u FN key to replace my END there, please PM, danke. To Sam: 10/10 keyboard, no doubt. Great work, I expected no less :thumb:Show Image(https://i.imgur.com/8XZrhdI.jpg)Show Image(https://i.imgur.com/r0o0oms.jpg)Show Image(https://i.imgur.com/9CEjrWZ.jpg)Show Image(https://i.imgur.com/Hr1yBaM.jpg)Show Image(https://i.imgur.com/b96x5ZS.jpg)Show Image(https://i.imgur.com/epdoG6G.jpg)Show Image(https://i.imgur.com/6ypJ4hT.jpg)Show Image(https://i.imgur.com/TkFMx6Z.jpg)Show Image(https://i.imgur.com/Xvvrrnp.jpg)Show Image(https://i.imgur.com/n2nC2Yi.jpg)
This was a lot of fun. If anyone has a spare Round 6 R4 1u FN key to replace my END there, please PM, danke. To Sam: 10/10 keyboard, no doubt. Great work, I expected no less :thumb:Show Image(https://i.imgur.com/8XZrhdI.jpg)Show Image(https://i.imgur.com/r0o0oms.jpg)Show Image(https://i.imgur.com/9CEjrWZ.jpg)Show Image(https://i.imgur.com/Hr1yBaM.jpg)Show Image(https://i.imgur.com/b96x5ZS.jpg)Show Image(https://i.imgur.com/epdoG6G.jpg)Show Image(https://i.imgur.com/6ypJ4hT.jpg)Show Image(https://i.imgur.com/TkFMx6Z.jpg)Show Image(https://i.imgur.com/Xvvrrnp.jpg)Show Image(https://i.imgur.com/n2nC2Yi.jpg)
is this the blue-grey or grey? looks great
This was a lot of fun. If anyone has a spare Round 6 R4 1u FN key to replace my END there, please PM, danke. To Sam: 10/10 keyboard, no doubt. Great work, I expected no less :thumb:Show Image(https://i.imgur.com/8XZrhdI.jpg)Show Image(https://i.imgur.com/r0o0oms.jpg)Show Image(https://i.imgur.com/9CEjrWZ.jpg)Show Image(https://i.imgur.com/Hr1yBaM.jpg)Show Image(https://i.imgur.com/b96x5ZS.jpg)Show Image(https://i.imgur.com/epdoG6G.jpg)Show Image(https://i.imgur.com/6ypJ4hT.jpg)Show Image(https://i.imgur.com/TkFMx6Z.jpg)Show Image(https://i.imgur.com/Xvvrrnp.jpg)Show Image(https://i.imgur.com/n2nC2Yi.jpg)
is this the blue-grey or grey? looks great
Dark Gray
I've modded or built at least a dozen keyboards by now and still pry each switch open by hand to lube. Is there a better, inexpensive/diy way to achieve the same results?
If I wasn't consumed by working full time then bed/bath renovation until bedtime, I'd be done by now.
https://diykeyboards.com/featured-products/product/55-the-switchcracker-2%E2%84%A2
is what i use, pretty cheap and effective, can open about 90 switches in about 4 minutes or so.
also used to use
https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1363
but that was a bigger pain.
if you care about aesthetics
https://kbdfans.cn/collections/keyboard-part/products/gb-2-in-1-machined-aluminum-switch-opener
or
https://kiiboss.studio/
I've modded or built at least a dozen keyboards by now and still pry each switch open by hand to lube. Is there a better, inexpensive/diy way to achieve the same results?
If I wasn't consumed by working full time then bed/bath renovation until bedtime, I'd be done by now.
https://diykeyboards.com/featured-products/product/55-the-switchcracker-2%E2%84%A2
is what i use, pretty cheap and effective, can open about 90 switches in about 4 minutes or so.
also used to use
https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1363
but that was a bigger pain.
if you care about aesthetics
https://kbdfans.cn/collections/keyboard-part/products/gb-2-in-1-machined-aluminum-switch-opener
or
https://kiiboss.studio/
The switch cracker works well I take it? No issues? Does it work with Kailh as well?
Has anyone soldered in in-switch LEDs onto their build?
Has anyone soldered in in-switch LEDs onto their build?Show Image(https://i.imgur.com/yNlQWRM.jpg)
Did everyone get an actual tracking number? Paid my shipping invoice about two weeks ago, but no word since then. Don't want to pester him directly about it.
Did everyone get an actual tracking number? Paid my shipping invoice about two weeks ago, but no word since then. Don't want to pester him directly about it.
got mine today. perfect packaging, perfect qc. another tgr homerun, thanks yuktsi.
tried this to get an idea of how they'd look w BoW set, looks pretty damn good imo:Show Image(https://i.imgur.com/DRkuVC2.jpg)
got mine today. perfect packaging, perfect qc. another tgr homerun, thanks yuktsi.
tried this to get an idea of how they'd look w BoW set, looks pretty damn good imo:Show Image(https://i.imgur.com/DRkuVC2.jpg)
Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Hey, Bootmapper on MacOS isn't able to detect the PCB (MBP 2016 15" in my case). You will need to use Windows for that. I am sending you the instructions to firm up and mapping. Thank you.Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Mine came through Aramex and then was handed off to UPS once it reach the US. Took some time for my tracking to start working after I received it but once it reached the courier, it took about 5 days.
Does anyone use their Jane PCB with MacOS? I seem to be unable to get mine working on mac. It works fine when I test it on my windows machine but I see it connect but no keycodes seem to be sent when I'm attached on my mac. I've tried moving to a direct USB port without much luck either.
Havent built mine yet but will be using it on MacOS as well. Can you also send me the instructions? Or will flashing it on Windows with Bootmapper be sufficient?Hey, Bootmapper on MacOS isn't able to detect the PCB (MBP 2016 15" in my case). You will need to use Windows for that. I am sending you the instructions to firm up and mapping. Thank you.Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Mine came through Aramex and then was handed off to UPS once it reach the US. Took some time for my tracking to start working after I received it but once it reached the courier, it took about 5 days.
Does anyone use their Jane PCB with MacOS? I seem to be unable to get mine working on mac. It works fine when I test it on my windows machine but I see it connect but no keycodes seem to be sent when I'm attached on my mac. I've tried moving to a direct USB port without much luck either.
To firm upHavent built mine yet but will be using it on MacOS as well. Can you also send me the instructions? Or will flashing it on Windows with Bootmapper be sufficient?Hey, Bootmapper on MacOS isn't able to detect the PCB (MBP 2016 15" in my case). You will need to use Windows for that. I am sending you the instructions to firm up and mapping. Thank you.Who does yuktsi usually ship with? I received a tracking number, but I'm not sure what website I should check for shipping information.
Mine came through Aramex and then was handed off to UPS once it reach the US. Took some time for my tracking to start working after I received it but once it reached the courier, it took about 5 days.
Does anyone use their Jane PCB with MacOS? I seem to be unable to get mine working on mac. It works fine when I test it on my windows machine but I see it connect but no keycodes seem to be sent when I'm attached on my mac. I've tried moving to a direct USB port without much luck either.
Thanks!
How's the color difference between everyone's the top and bottom halves? Mine is a bit off but I'm not sure if I'm being overly picky or not.
How's the color difference between everyone's the top and bottom halves? Mine is a bit off but I'm not sure if I'm being overly picky or not.
How's the color difference between everyone's the top and bottom halves? Mine is a bit off but I'm not sure if I'm being overly picky or not.
Ah alright. I wasn't sure since this is the first board I've gotten in this color. I usually get silver boards with are pretty much spot on for colored halves.
Ah alright. I wasn't sure since this is the first board I've gotten in this color. I usually get silver boards with are pretty much spot on for colored halves.
most silver is clear ano, so it will match nearly 100% of the time
because the parts are two different sizes and shapes, there will be some slight variation in the colors
pretty much every board i've owned has had a little variation
Can someone post a picture of B/G Jane with Arctic?
Can someone post a picture of B/G Jane with Arctic?
Can someone post a picture of B/G Jane with Arctic?
board render by Oblotzky
photoshop edit by meShow Image(https://i.imgur.com/zF3BoDF.jpg)
Can someone post a picture of B/G Jane with Arctic?
board render by Oblotzky
photoshop edit by meShow Image(https://i.imgur.com/zF3BoDF.jpg)
Jane just came sandblasted toblerone v clean, got in it gray but has a blueish tint to it :)Show Image(https://i.imgur.com/vUIBv3v.jpg)Show Image(https://i.imgur.com/Gzd1BsE.jpg)Show Image(https://i.imgur.com/SVHHqKq.jpg)Show Image(https://i.imgur.com/lKmy6zU.jpg)
Jane just came sandblasted toblerone v clean, got in it gray but has a blueish tint to it :)Show Image(https://i.imgur.com/vUIBv3v.jpg)Show Image(https://i.imgur.com/Gzd1BsE.jpg)Show Image(https://i.imgur.com/SVHHqKq.jpg)Show Image(https://i.imgur.com/lKmy6zU.jpg)
finish building, don't even know if its gray or blue gray but it looks v nice. :)Blue-gray.Show Image(https://i.imgur.com/riJF1pn.jpg)
finish building, don't even know if its gray or blue gray but it looks v nice. :)Show Image(https://i.imgur.com/riJF1pn.jpg)
ffff I love this board. I love this color!!!!!!Show Image(https://i.imgur.com/93KU7Dy.jpg)
ffff I love this board. I love this color!!!!!!Show Image(https://i.imgur.com/93KU7Dy.jpg)
Oh boy that color is perfect!
ne wkl, blue-grey shipping invoice avail? :feelsbadman:
Few different pictures under some different lighting. This purple is great! Love it more under natural lighting.
(https://live.staticflickr.com/65535/47923938922_42a39890de_k.jpg) (https://flic.kr/p/2g1SHp1)
If someone wants to sell their spot HMU!
Sent from my iPhone using Tapatalk
anyone still waiting for their shipping invoice? xdYep :(
Last batch :'(
Last batch :'(Last batch best batch. Waiting for my 4th...:-X
Last batch :'(Last batch best batch. Waiting for my 4th...:-X
Last batch :'(Last batch best batch. Waiting for my 4th...:-XShow Image(https://i.kym-cdn.com/entries/icons/original/000/022/978/yNlQWRM.jpg)
Hey folks! Special thanks to nickheller and otani for testing this for me, the TGR Jane is now in QMK!!
Also mucho mucho thanks to Yuktsi for providing a TGR Jane so I could actually do this!
Please report back if you see any oddities and I'll get to fixing them right away.
https://config.qmk.fm/#/tgr/jane/LAYOUT_all
For those who were recently invoiced, has any of yours shipped?
Show Image(https://i.imgur.com/Adna70e.jpg)
My Jane.
Show Image(https://i.imgur.com/Adna70e.jpg)
My Jane.
Show Image(https://i.imgur.com/Adna70e.jpg)
My Jane.
TGR Jane V2. Built with lubed/filmed (205g0, Kin poly film) Retooled Blacks, h87a PCB, Hiney FR4 plate (red full plate).Hot af
Keyset is mixture of GMK 9009 R2 and ebpt Cyrillic (sp?)Show Image(https://i.imgur.com/QeGwSeC.png)Show Image(https://i.imgur.com/7F7A2Aw.png)Show Image(https://i.imgur.com/EYSF6dP.png)
TGR Jane V2. Built with lubed/filmed (205g0, Kin poly film) Retooled Blacks, h87a PCB, Hiney FR4 plate (red full plate).
Keyset is mixture of GMK 9009 R2 and ebpt Cyrillic (sp?)Show Image(https://i.imgur.com/QeGwSeC.png)Show Image(https://i.imgur.com/7F7A2Aw.png)Show Image(https://i.imgur.com/EYSF6dP.png)
How does the FR4 plate compare to other materials, like aluminum, brass, or PC?
Very hot <3 :-*Show Image(https://i.imgur.com/dO5Mv5B.jpg)Show Image(https://i.imgur.com/Na8TOAo.jpg?1)Show Image(https://i.imgur.com/tQUkdXb.jpg)Show Image(https://i.imgur.com/HKXzrgP.jpg)Show Image(https://i.imgur.com/NT3EKJ5.jpg)
Very hot <3 :-*Show Image(https://i.imgur.com/dO5Mv5B.jpg)Show Image(https://i.imgur.com/Na8TOAo.jpg?1)Show Image(https://i.imgur.com/tQUkdXb.jpg)Show Image(https://i.imgur.com/HKXzrgP.jpg)Show Image(https://i.imgur.com/NT3EKJ5.jpg)
TGR Jane r2?
What about V3
I have the TGR Pontoporia PCB which I was believe was used in this run of keyboards. I used it to replace the broken TX87KIN L3 PCB that first came with the Jane CE. I used Bootmapper to flash over the hex file. I have only installed two LEDs, one for the Caps Lock and the other for Scroll Lock. The functionality of both keys works, however, the Caps Lock key controls both LEDs. Does anybody know a fix to this? I tried messing with the Lock LED Settings in Bootmapper but to no avail.
I have the TGR Pontoporia PCB which I was believe was used in this run of keyboards. I used it to replace the broken TX87KIN L3 PCB that first came with the Jane CE. I used Bootmapper to flash over the hex file. I have only installed two LEDs, one for the Caps Lock and the other for Scroll Lock. The functionality of both keys works, however, the Caps Lock key controls both LEDs. Does anybody know a fix to this? I tried messing with the Lock LED Settings in Bootmapper but to no avail.
hey Steezus,
I had a similar issue - can't remember if it was identical, but definitely similar. See if this helps:
(Attachment Link)
does yutski sell extras?
Sent from my SM-G973U using Tapatalk
but vendors sell extras after the GB is 100% furfilled and confirmed no issues?does yutski sell extras?
Sent from my SM-G973U using Tapatalk
Boi if he did lol, they would have been sold out eons ago
but vendors sell extras after the GB is 100% furfilled and confirmed no issues?does yutski sell extras?
Sent from my SM-G973U using Tapatalk
Boi if he did lol, they would have been sold out eons ago
Sent from my SM-G973U using Tapatalk
but vendors sell extras after the GB is 100% furfilled and confirmed no issues?does yutski sell extras?
Sent from my SM-G973U using Tapatalk
Boi if he did lol, they would have been sold out eons ago
Sent from my SM-G973U using Tapatalk
Any info on the next round of TGR Jane?
Has anyone built their jane with a hiney PCB and Fr4 Plate? Can you tell me the orientation of the Enter stab? North facing looks like it wouldn't fully clear and hit the plate and I'm not sure about south facing.
Has anyone built their jane with a hiney PCB and Fr4 Plate? Can you tell me the orientation of the Enter stab? North facing looks like it wouldn't fully clear and hit the plate and I'm not sure about south facing.I had to have the stabilizer hole on my fr4 plate filed to accommodate a North-facing wire (which is the only way it fit on the pcb anyways); without filing it wouldn't return completely
I'm really slow to the race here. Received my Jane v2 months ago and haven't had a spare minute to build it. Buying your first home and diving head first into renovation can swallow your life hole.
I finally have a little downtime this week and plan on building it within the next few days.
Has there been issues w/ QC and PCB problems? I certainly hope I'm not too late as I didn't get a chance to test anything yet.
Thanks!
I believe the stock TGR PCB has also been ported to QMK.
I'm really slow to the race here. Received my Jane v2 months ago and haven't had a spare minute to build it. Buying your first home and diving head first into renovation can swallow your life hole.
I finally have a little downtime this week and plan on building it within the next few days.
Has there been issues w/ QC and PCB problems? I certainly hope I'm not too late as I didn't get a chance to test anything yet.
Thanks!
I know that feel, we're just now settled in after 8 months, still tons to do.
I haven't heard of any QC issues, but the good news is hineybush is cranking out H87A's all the time now, and they are both compatible with the Jane and support QMK. So if you do need another, they are pretty available. I believe the stock TGR PCB has also been ported to QMK.
Sorry to hear that. Try unplug the board > hold the top left most key and plug in > go to bootmapper > Options > Set USB > Set KeyboardI'm really slow to the race here. Received my Jane v2 months ago and haven't had a spare minute to build it. Buying your first home and diving head first into renovation can swallow your life hole.
I finally have a little downtime this week and plan on building it within the next few days.
Has there been issues w/ QC and PCB problems? I certainly hope I'm not too late as I didn't get a chance to test anything yet.
Thanks!
I know that feel, we're just now settled in after 8 months, still tons to do.
I haven't heard of any QC issues, but the good news is hineybush is cranking out H87A's all the time now, and they are both compatible with the Jane and support QMK. So if you do need another, they are pretty available. I believe the stock TGR PCB has also been ported to QMK.
What are the odds? I finally built my Jane v2 and have been loving every second of it. I just returned to my PC after doing some drywall work, and I'm getting zero input from the keyboard.
The USB connects to Windows 10, but I'm getting this error message:
https://i.imgur.com/wJdUlbZ.png (https://i.imgur.com/wJdUlbZ.png)
I can't get it to work now at all. I spent a good 6 hours lubing Cherry MX blacks for this thing and I will not be happy if I have to desolder all of these switches -_-.
I tried swapping USB ports. I even swapped cables. Rebooted 3 times. No input anymore. I'm now back on my ES-87 and not sure what to do.
Sorry to hear that. Try unplug the board > hold the top left most key and plug in > go to bootmapper > Options > Set USB > Set KeyboardI'm really slow to the race here. Received my Jane v2 months ago and haven't had a spare minute to build it. Buying your first home and diving head first into renovation can swallow your life hole.
I finally have a little downtime this week and plan on building it within the next few days.
Has there been issues w/ QC and PCB problems? I certainly hope I'm not too late as I didn't get a chance to test anything yet.
Thanks!
I know that feel, we're just now settled in after 8 months, still tons to do.
I haven't heard of any QC issues, but the good news is hineybush is cranking out H87A's all the time now, and they are both compatible with the Jane and support QMK. So if you do need another, they are pretty available. I believe the stock TGR PCB has also been ported to QMK.
What are the odds? I finally built my Jane v2 and have been loving every second of it. I just returned to my PC after doing some drywall work, and I'm getting zero input from the keyboard.
The USB connects to Windows 10, but I'm getting this error message:
https://i.imgur.com/wJdUlbZ.png (https://i.imgur.com/wJdUlbZ.png)
I can't get it to work now at all. I spent a good 6 hours lubing Cherry MX blacks for this thing and I will not be happy if I have to desolder all of these switches -_-.
I tried swapping USB ports. I even swapped cables. Rebooted 3 times. No input anymore. I'm now back on my ES-87 and not sure what to do.
Let me know how it goes
Glad to hear it worked out for you! Was just about to say if you live in MA and run into desperate need of a spare stock pcb, I am more than happy to toss an extra one of mine your way to help! As in how that couldve happened, perhaps the pcb was not flashed correctly the first time? That would just be my guess...
Glad to hear it worked out for you! Was just about to say if you live in MA and run into desperate need of a spare stock pcb, I am more than happy to toss an extra one of mine your way to help! As in how that couldve happened, perhaps the pcb was not flashed correctly the first time? That would just be my guess...
No clue. I live in Western MA, right outside of Springfield. Where are you? :)
I was told that the keyboard might've accidentally been put into PS/2 mode on plugging it in. Either way, following Yuktsi's instructions worked like a charm.
What switches did everyone go with?
I'm really enjoying the GPL105/205 63.5g Retooled Blacks.
BUT... I have this weird desire to swap to CLICKY switches. I've only used them for a brief period of time (1-2 days), before selling the built board.
I'm not up on things, but is there a way to lube clicky switches without losing the satisfying auditory feedback?
Does anyone have an extra pc plate? I’m down to pay generously, thanks!
For those wanting to use VIA on the TGR Jane V2....it has been done!
https://github.com/the-via/keyboards/pull/95
Flash the latest VIA firmware available on caniusevia.com, load up VIA, plug in your board and configure away!
TGR Jane V2 CE coming up next!
For those wanting to use VIA on the TGR Jane V2....it has been done!
https://github.com/the-via/keyboards/pull/95
Flash the latest VIA firmware available on caniusevia.com, load up VIA, plug in your board and configure away!
TGR Jane V2 CE coming up next!
Have the plate files been released? I can't find them anywhere.
Have the plate files been released? I can't find them anywhere.
here u go
https://filebin.net/h04eznwziz188uha
could you reupload the plate file, seem it broken when I click it, thank a lot!!!!!Have the plate files been released? I can't find them anywhere.
here u go
https://filebin.net/h04eznwziz188uha
This is my first time reading a GB kind of post, so this question may cause some flame:
Is this keyboard available for sale?
/FlameGuardOn
This is my first time reading a GB kind of post, so this question may cause some flame:
Is this keyboard available for sale?
/FlameGuardOn
no it was sold and shipped months ago
This is my first time reading a GB kind of post, so this question may cause some flame:
Is this keyboard available for sale?
/FlameGuardOn
no it was sold and shipped months ago
Thanks! Know where I could get my hands on one now? Looking for that creamycreamy
/r/mechmarket, geekhack classifieds, your friends & coworkers. your bank account.
/r/mechmarket, geekhack classifieds, your friends & coworkers. your bank account.
lolz blessed to say I have an unlimited budget for this. posted on mm. thank you!!
Yall gotta stop bumping this thread
My heart races every time I see Jane and 100% thinking all v2 ce are shipped 😭
Yall gotta stop bumping this thread
My heart races every time I see Jane and 100% thinking all v2 ce are shipped 😭
the topic title says 100% shipped
Dno I think he is farming posts a'la puddsy or something.
He might as well have told me that there's a banner in the top left of the site using the standard stylesheet, equally obvious. Then again he's not the brightest, he probably didn't read what I wrote and/or didn't comprehend it.
Dno I think he is farming posts a'la puddsy or something.
He might as well have told me that there's a banner in the top left of the site using the standard stylesheet, equally obvious. Then again he's not the brightest, he probably didn't read what I wrote and/or didn't comprehend it.
it's true
i am dim
Dno I think he is farming posts a'la puddsy or something.
He might as well have told me that there's a banner in the top left of the site using the standard stylesheet, equally obvious. Then again he's not the brightest, he probably didn't read what I wrote and/or didn't comprehend it.
it's true
i am dim