Author Topic: [WTB] Filco Majestouch 2 Black case or similar, Pegasus Hoof or HID liberation  (Read 3884 times)

0 Members and 1 Guest are viewing this topic.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Looking for the case, not too happy with my white one, seems to have a bend to it. Also looking for the controller to be pre-built
« Last Edit: Sun, 30 March 2014, 18:43:03 by iKevinFtw »

Offline irendulic

  • Trade Count: (0)
  • Posts: 40
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #1 on: Sun, 09 March 2014, 11:37:43 »
Hi,

would you also consider sale or trade only?

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #2 on: Sun, 09 March 2014, 11:41:44 »
Hi,

would you also consider sale or trade only?

Trade only, sorry!

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #3 on: Sun, 09 March 2014, 20:29:33 »
bump

Offline Thechemist

  • Trade Count: (0)
  • Posts: 244
  • Location: East Coast USA
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #4 on: Sun, 09 March 2014, 20:32:00 »
bump

You need to wait 24hrs before you can bump your thread.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #5 on: Sun, 09 March 2014, 20:32:54 »
whoops, my bad

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #6 on: Wed, 12 March 2014, 09:24:22 »
bump

Offline mbreslin

  • Trade Count: (0)
  • Posts: 14
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #7 on: Thu, 13 March 2014, 10:56:27 »
Are you going to replace the caps on the ducky/filco? MK has TKL ducky with blues with chinese legends.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #8 on: Thu, 13 March 2014, 13:45:26 »
Are you going to replace the caps on the ducky/filco? MK has TKL ducky with blues with chinese legends.

No, Im not getting new caps until toxic ships out

Offline mbreslin

  • Trade Count: (0)
  • Posts: 14
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #9 on: Thu, 13 March 2014, 14:33:59 »
I see, I was going to offer to either buy the ducky for the trade or just give you the 100$ so you could buy the ducky.

I'll keep looking for a poker 2 with browns.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #10 on: Fri, 14 March 2014, 17:33:46 »
bump

Offline saltdiscus

  • Trade Count: (0)
  • Posts: 36
  • Location: United States
Re: WTT: Poker 2 with Browns for Filco or Ducky TKL with blues
« Reply #11 on: Sat, 15 March 2014, 08:48:46 »
i have full  ducky Zero DK2108 .i live in boston close to u.
duckyshine3/looking for poker,mx keycaps

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
bump

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2135
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
:D looking for some awesome RGB or RGBY mods!

Did you find riotonthebay's thread? I thought I saw your avatar there

http://geekhack.org/index.php?topic=55677.0
Most of the modding can be done on your own once you break through the psychological barriers.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTB: Replacement top plate for filco WTS: 2x gtx 470 w/ sli cable
« Reply #14 on: Sat, 22 March 2014, 11:57:57 »
bump

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: WTT: My Keypop Iron Man for something cool of yours.
« Reply #15 on: Sun, 23 March 2014, 17:39:16 »
bumppppp

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: LF: Majestouch 2 Black case or similar (not white)
« Reply #16 on: Fri, 28 March 2014, 00:06:02 »
bump

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #17 on: Sat, 29 March 2014, 20:46:49 »
bump

Offline PolaBurrr

  • Trade Count: (0)
  • Posts: 109
  • Location: Chapel Hill, NC
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #18 on: Sat, 29 March 2014, 22:38:03 »
edit: nvm. this thread seems to be of mixed responses from different threads...
« Last Edit: Sat, 29 March 2014, 22:41:51 by PolaBurrr »

Offline esoomenona

  • Gnillort?
  • Trade Count: (0)
  • Posts: 5323
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #19 on: Sat, 29 March 2014, 22:43:00 »
http://www.cmstore-usa.com/quickfire-rapid-replacement-top-panel/

With a little sanding of a couple of the stand-offs, this will fit onto your Filco case (I'm assuming it's TKL, since you didn't say; if not, good luck with the search). Only thing that you would have is the three holes for the LEDs. The case will fit over the LEDs without harming them. You could drill them out if you wanted to see them.

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #20 on: Sat, 29 March 2014, 23:03:39 »
http://www.cmstore-usa.com/quickfire-rapid-replacement-top-panel/

With a little sanding of a couple of the stand-offs, this will fit onto your Filco case (I'm assuming it's TKL, since you didn't say; if not, good luck with the search). Only thing that you would have is the three holes for the LEDs. The case will fit over the LEDs without harming them. You could drill them out if you wanted to see them.

Thanks for the reccomendation! I really want the Filco one though, I really want it to say filco in the front :/ and I dont like the texture of the qfr plates, owned both the gray and black ones already.

Offline PolaBurrr

  • Trade Count: (0)
  • Posts: 109
  • Location: Chapel Hill, NC
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #21 on: Sat, 29 March 2014, 23:30:30 »
What switches is your filco? If they are cherry blacks, I can trade my filco with black case with cherry browns for yours :D

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #22 on: Sun, 30 March 2014, 10:02:15 »
What switches is your filco? If they are cherry blacks, I can trade my filco with black case with cherry browns for yours :D

Cherry browns as well sadly :/

Offline Wildcard

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1046
  • Location: Fields of Columbia
  • When caffeine isn't enough
Re: [WTB] Filco Majestouch 2 Black case or similar (not white)
« Reply #23 on: Sun, 30 March 2014, 10:16:56 »
Shoot me a pm, I have a case I could swap you with :)

Offline KebinPls

  • Trade Count: (0)
  • Thread Starter
  • Posts: 141
  • Location: Providence, RI
  • OK
    • Insta

Offline skcheng

  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 913
  • Location: Tenafly, NJ USA
    • Tenafly Dentistry
Order the Pegasus Hoof from bpiphany here:

[url]http://geekhack.org/index.php?topic=46700.0/url]

I received mine really quickly and right now I think he has some built up.   

Offline Proc31

  • Trade Count: (0)
  • Posts: 38
  • Location: United Kingdom
I'm very interested in this as I'm looking to swap my black filco case for a while one though I'm interested to hear about this bend that you mentioned, it is possible you could take a couple of photos?

Offline Photoelectric

  • * Administrator
  • Trade Count: (1)
  • Posts: 6766
I'm very interested in this as I'm looking to swap my black filco case for a while one though I'm interested to hear about this bend that you mentioned, it is possible you could take a couple of photos?

Please continue this discussion outside of the Classifieds, such as on the Keyboards subforum.
« Last Edit: Mon, 31 March 2014, 16:10:01 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline esoomenona

  • Gnillort?
  • Trade Count: (0)
  • Posts: 5323
I'm very interested in this as I'm looking to swap my black filco case for a while one though I'm interested to hear about this bend that you mentioned, it is possible you could take a couple of photos?

Please continue this discussion outside of the Classifieds, such as on the Keyboards subforum.

Why should he do that? This is very relevant to the Classifieds post at hand. If the case up for trade is bent, then people should see it (though, I don't think he wants to trade, as it's WTB; but then again, maybe he didn't think people would be interested in a case with a small bend, where he might've been wrong as someone clearly is).

Offline Photoelectric

  • * Administrator
  • Trade Count: (1)
  • Posts: 6766
I didn't see anything about the bend in this thread and assumed it was off-topic.  My bad if so.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline esoomenona

  • Gnillort?
  • Trade Count: (0)
  • Posts: 5323
I didn't see anything about the bend in this thread and assumed it was off-topic.  My bad if so.

It's in the OP.

Offline Photoelectric

  • * Administrator
  • Trade Count: (1)
  • Posts: 6766
Sorry, I'm functioning on 2 hours of sleep past few days--just ignore it!  :-X
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline mbreslin

  • Trade Count: (0)
  • Posts: 14
Just wanted to give you a free bump and say I did business with kevin when this thread was about trying to offload his poker 2, he shipped promptly and was a breeze to work with. I've been using poker 2 from the original thread for awhile now, it came in perfect condition well wrapped. My first mechanical. :)

I'll probably be grabbing one of those cm novatouches when available but the poker 2 has been a great introduction to browns.

Thanks Kevin!

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 3300
  • NY Giants!!!
I got a camo Filco. You can swap the case and sell the guts
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline HapticBovinator

  • Trade Count: (0)
  • Posts: 51
Hey I know this thread is a little old, but are you still looking to trade? I have a black tkl filco case in good condition. Not perfect though.
:-)