Milestone wrist rests. I'm not sure about the contacts.
Dave from iomania
Milestone wrist rests. I'm not sure about the contacts.
non-Deck mx Clear keyboards for a realistic price (deck listed on your site for ~270 with "savings" of ~70 for a final price of 199 which is ~10 more than http://www.deckkeyboards.com). Granted Deck is sold out... still...
Milestone wrist rests. I'm not sure about the contacts.
Keycool mx clearThis
Any luck getting through to Noppoo yet?
Also, I want a Genius/Agama M1 (http://detail.tmall.com/item.htm?id=15393264285&is_b=1&cat_id=2&q=Genius+M1). Based on the logo/company name, I found this contact info. (http://www.geniusnet.com/wSite/ct?xItem=245&ctNode=56)
A decent carrying case for a full size keyboard
EDIT: or any cases period
Sent from a box of cereal
Not yet with Noppoo.Neither appear to have the cherry logo on the keyswitch. At least, I didn't see it.
Thanks for the detailed info on Genius Agama. Makes life much easier :) Is it just me or do those Red Cherrys look a little off? Maybe it's the picture angle...
Vortex aluminum TKL case. I read that you were trying to set up something with them. I don't want to purchase Vortex's whole keyboard, I don't have 250$ to spend right now. They must be able to make these for a pretty reasonable price, though. You're getting dye-subbed PBT caps, which go for around 80$ in a group buy (always thought this was kind of expensive, I might have mis-read something), 87 switches, which at their cheapest go for around 50-60$ new, along with the PCB and such, costing 10-20$ for them. Meaning that the board without the case should cost them around 140-160$, and the case alone would sell for 100$ or so, incredible because these kind of things normally sell for 180-200$. From what I've read and researched, there hasn't been any acutal aluminum cases for TKL keyboards, at least on english forums, that have been mass-produced in a group buy. Puting them in your online store would take it to the next level, I'm sure they would sell out before you can even restock if it worked out... So reserve one for me. ;)
Vortex aluminum TKL case. I read that you were trying to set up something with them. I don't want to purchase Vortex's whole keyboard, I don't have 250$ to spend right now. They must be able to make these for a pretty reasonable price, though. You're getting dye-subbed PBT caps, which go for around 80$ in a group buy (always thought this was kind of expensive, I might have mis-read something), 87 switches, which at their cheapest go for around 50-60$ new, along with the PCB and such, costing 10-20$ for them. Meaning that the board without the case should cost them around 140-160$, and the case alone would sell for 100$ or so, incredible because these kind of things normally sell for 180-200$. From what I've read and researched, there hasn't been any acutal aluminum cases for TKL keyboards, at least on english forums, that have been mass-produced in a group buy. Puting them in your online store would take it to the next level, I'm sure they would sell out before you can even restock if it worked out... So reserve one for me. ;)
Yeah, it's tough to do the math with some of Vortex's line and make sense of it. The aluminum cases will be well over $100, but should still be less than the $180 - $200 you're seeing elsewhere. LTD Pure's (w/ aluminum case) will be $199, so it's actually a really good value considering how much the cases will be by themselves.have they given you a relatively solid eta on the TKL cases yet?
Edit: I'm going to start a new thread about the Vortex Line and continue with the details in it.
have they given you a relatively solid eta on the TKL cases yet?
I noticed something on the keyboard spec sheet from Ducky Internationals website. It shows the options for white 9xxx series keyboards; why don't you carry these?
one other keyboard to look out for: Matias Tactile Pro 4 w/ quiet tactile Alps switches which is due to be released in a month.
I am waiting to see pictures / sound clips / read reviews of this before buying but it sounds very intriguing!
What about those aluminum tkl filco chasis vortex showed off on its Facebook page?
Another idea for something that shouldn't be too much overhead:
WASD sells little plastic bags filled with an excellent lubricant for stabilizers. He sells them with the "barebones" keyboards. One little bag can lube a bunch of keyboards. Perhaps this is something that can go in the accessories section? The lube he uses is superior to what EK is using.
Size x1.25 and x1.5 POM blank keycaps
You think SP could make these? Can you link some examples if you have them?I'm pretty sure SP doesn't do POM, only ABS and some PBT.
A Deck 82 - how cheap can you get one to me in Australia? They are $149AU here plus $19 postage.
If you can make a decent dent on their price......
Sooooo whats your best price for one then? I need a new mechanical as the last one is dead. What prices for other mechanical backlit keyboards incl postage to AU?
Really liking the KBTalking Pure you guys sent me.
THANKS!
I'd post a review here but it would just get deleted.
Really liking the KBTalking Pure you guys sent me.
THANKS!
I'd post a review here but it would just get deleted.
Please post a review on our site. I'd really like to get more reviews up for all of the products we carry.If you want to mail me keyboards to review, I'd be happy to spend a week with them, then send them back with a review.
MechanicalKeyboards.com <-- nothing but our 'best prices'
Goto step 2 of checkout for INT shipping quote. Shipping estimator is shot and usually doesn't work for INT anyway.
What about those aluminum tkl filco chasis vortex showed off on its Facebook page?
I would like to see some grease, boards with MX clear, MX green and MX lock switches.
Dont know if it exists but a wristrest that fits the KBT Pure perfect, cuz im buying one from you real soon and a wristrest would be awesome :-D
Hail mechanicalkeyboards.com!
Excellent! When will you have pricing estimates? If it's compatible, soon my phantom will be complete!What about those aluminum tkl filco chasis vortex showed off on its Facebook page?
I think we're supposed to get some of these in next month.
I was wondering if you guys will be getting any Topre keyboards?
utron is the only one I know of. I don't know of any ANSI ones at all. I'm no topre expect, though.I was wondering if you guys will be getting any Topre keyboards?
Know any brands outside of RealForce / PFU using Topre? EKB has exclusive agreements with both, so we can't get any. However, if there's another brand out there using the Topre switches, I'd be happy to look into it :)
imsto's thick cherry profile MX caps in multiple colors?
I was wondering if you guys will be getting any Topre keyboards?
Know any brands outside of RealForce / PFU using Topre? EKB has exclusive agreements with both, so we can't get any. However, if there's another brand out there using the Topre switches, I'd be happy to look into it :)
Filco Italian Red TKL
you missed your chance, these probably wont be a mass produced item. camp the classifieds!Show Image(http://dangwang.files.wordpress.com/2012/07/img_0968.jpg)
cream cheese and green 87 doubleshot key caps, consider it bought if you get it, ty.
you missed your chance, these probably wont be a mass produced item. camp the classifieds!
CCnG was actually the second run. The first was done by korean group and had icky legends (IMO, some people like them).
there are plenty of things out there you just have to network and camp the classifieds.
fake alert or OG red alert?
you know rag's red alert was a redo like CCnG? the original has some really cool legends that cost them an arm and a leg.
Someone needs to tell Elite Keyboards to sh1t or get off the pot.
Race keycap sets. PBT would be sick, but id settle for ABS
I've been looking for this keyboard forever but I can't find it anywhere in stock. Filco Majestouch 2 Ninja; Tenkeyless; NKR, Red Switches. I think filco calls that "soft linear action".
I definitely would like to get the new Ducky DK9008 G2 PRO with the Green Cherry MX switches! According to their Facebook page, it's only available in Taiwan in November with limited quantities. It doesn't say if they'll be shipping any here to the U.S.
unicomp caps with non-black printing for Ms and unicomp boards?
Show Image(http://geekhack.org/index.php?action=dlattach;attach=6336;type=avatar)
FYI: Ducky's Facebook page announced that they are taking pre-orders for the new 9008 Pro 2 both 104 and 87 key version with the new Green MX and variable MX boards. According to the translation I read, they are doing the pre-orders because of limited interest in the boards. I definitely am in to purchase a full size Green MX keyboard if you can get some!
Someone needs to tell Elite Keyboards to sh1t or get off the pot.
I feel the same way. I would love to get one of the FC700 with brown switches but they are taking forever to get rid of current stock. I might just give up on it and order something from shaker instead.
Can you get some boards that use mx milk switches?I second this, especially compact/TLK.
I thought they were weighted more like blues.
I did a side-by-side comparison and posted pictures ages ago. Here's a link to the photos on my photobucket account. I knew buying a full set of whites and a full set of greens was a good idea. Whites feel and actuate almost exactly the same (maybe 5g different at MOST), but are much quieter. They look very similar.I thought they were weighted more like blues.
AFAIK, whites (aka "milks") are basically a different color of MX Green. Same actuation force. Although I don't know anyone who has done a side by side comparison yet, there is a lot of debate whether the stem of a mx white is different than that of a green.
Cheers,
PLUM 96 (http://detail.tmall.com/item.htm?id=15888742416&ali_trackid=2:mm_14507416_2297358_8935934:1350908854_4k2_1764139203)
Hey ShakeR, I think you replaced MX Clear with MX White in your search options, so customers cannot search for the Deck tactile keyboards anymore.
Any possibility of getting Filco Majestouch 2 with Cherry Browns?
Not even the Keyboard Company (the supplier of Filco keyboards in the US) can get them. There is a Cherry Brown switch shortage right now.
Any possibility of getting Filco Majestouch 2 with Cherry Browns?
Not even the Keyboard Company (the supplier of Filco keyboards in the US) can get them. There is a Cherry Brown switch shortage right now.
I just bought one from them. Their website currently says "lots in stock". Took about three or four business days from the UK to California.
http://www.keyboardco.com/keyboard_details.asp?PRODUCT=623
- Ron | samwisekoi
Any possibility of getting Filco Majestouch 2 with Cherry Browns?
Not even the Keyboard Company (the supplier of Filco keyboards in the US) can get them. There is a Cherry Brown switch shortage right now.
I just bought one from them. Their website currently says "lots in stock". Took about three or four business days from the UK to California.
http://www.keyboardco.com/keyboard_details.asp?PRODUCT=623
- Ron | samwisekoi
I've checked their site and have seen them have them in stock, but its a bit pricey to get it imported from the UK. I've been checking Amazon regularly, but they don't seem to have had any in stock for a while so I'm hoping some of the other mechanical keyboard e-retailers are able to get some.
Any possibility of getting Filco Majestouch 2 with Cherry Browns?
Not even the Keyboard Company (the supplier of Filco keyboards in the US) can get them. There is a Cherry Brown switch shortage right now.
I just bought one from them. Their website currently says "lots in stock". Took about three or four business days from the UK to California.
http://www.keyboardco.com/keyboard_details.asp?PRODUCT=623
- Ron | samwisekoi
I've checked their site and have seen them have them in stock, but its a bit pricey to get it imported from the UK. I've been checking Amazon regularly, but they don't seem to have had any in stock for a while so I'm hoping some of the other mechanical keyboard e-retailers are able to get some.
Are you planning on importing these?Show Image(http://sphotos-d.ak.fbcdn.net/hphotos-ak-snc6/703686_394267447315022_1207326372_o.jpg)
+3 would love a ducky with greysAre you planning on importing these?Show Image(http://sphotos-d.ak.fbcdn.net/hphotos-ak-snc6/703686_394267447315022_1207326372_o.jpg)
Oh wow...an entire keyboard with grey switches...yes please!
Also,
Now that Matias is developing the Quiet Tactile and Clicky switches can you communicate to Ducky that it would be nice to have a 9087 level board with these switches? Currently there are no high quality tenkeyless Alps keyboards - especially with PBT - on the market. These new switches also take LED's on every switch unlike the ones Ducky uses.
If that is not possible would how about 1087XM / 1008XM "barebones" kits - basically what they sell now except no switches are included - these can be sourced from Matias or older boards.
I don't know what Ducky's current stance is on Alps - but they've already got most of the tooling there - it would be a shame to discontinue it with the new Matias switches.
Can you please import some of the new Ducky Shine II boards with MX Clear switches?
Can you please import some of the new Ducky Shine II boards with MX Clear switches?
I wholeheartedly second this notion. I will cry man tears!
Can you please import some of the new Ducky Shine II boards with MX Clear switches?
I wholeheartedly second this notion. I will cry man tears!
From Ducky :)
"We plan to release a new keyboard DK9008 PBT Dye-sublimation, some of model with these special switch, you can order it later."
Not sure when 'later' is, but this sounds exciting.
Do you have any idea of when the Ducky boards with Clear switches will be available (if at all)? I've seen them on some Scandinavian Ducky importers' shops, so I know Ducky must be starting to ship them out.
I'd like to see double shot key sets that I can order on the spot, rather than spending many months dealing with group buys. SP sells black/white sets these days, but a few color choices would be swell.
Alps key caps.........................................................................please.
Will you be trying to get the Ducky dyesub PBT's they are coming out with?
I'm going to buy a Poker from you as soon as you refund my Pure.
It'd be cool if I could get it in something other than Blacks.
Plum 96 - not available elsewhere in the USA nor anything similar (compact, with numeric pad, mechanical and wireless)
[)amien
I want Ducky 78!Show Image(http://i.imgur.com/GjhMQ33.jpg)
I will look into these Phantom PCBs as I saw them mentioned elsewhere as well.
I just purchased the Ducky 78 board. That's a very unique keyboard.
I'm also very interested in the Ducky Shine II with white keycaps. I hope they start offering Green, Clear, and White switches for the Shines in addition to the standard Red, Black, Brown, and Blue.
If you are interested in importing something very special and impossible to find anywhere (except Australia - very expensive shipping) - I'd suggest contacting Leopold (Korea.)
Over a year ago they released the FC700R - a successor to the FC200R. While EliteKeyboards owns the distribution rights for Leopold products perhaps Leopold has gotten tired of EK not selling this new board and losing market share to competitors. They might make an exception that will allow you to only carry the FC700R; Perhaps, allowing you to carry it as long as EK doesn't put in an order.
In particular I would like a FC700R w/ Black switches, White or Gray case, and Blank keycaps.
EliteKeyboards: if you are reading this - it's nothing personal. Some of us just want to buy this keyboard - that's it. There is an old saying: Crap or get off the pot.
Correct me if I'm wrong, but only CM can ship mx green boards. Thus you may see Clear and White in North America, but not green. but hey, wouldn't be the first time I was happily mistaken.I doubt those exclusive US distribution rights would apply to Asian-oriented makers like Ducky.
Source: http://www.anandtech.com/show/6623/coolermaster-new-storm-scouts-crashing-into-eisbergs-and-cherry-mx-green
Cheers,
Correct me if I'm wrong, but only CM can ship mx green boards. Thus you may see Clear and White in North America, but not green. but hey, wouldn't be the first time I was happily mistaken.I doubt those exclusive US distribution rights would apply to Asian-oriented makers like Ducky.
Source: http://www.anandtech.com/show/6623/coolermaster-new-storm-scouts-crashing-into-eisbergs-and-cherry-mx-green
Cheers,
Sure it does. CM/Cherry can go after you for violating it. BTW allegedly it's not just US but all of North America :/They would go after the US distribution not Ducky.
Sure it does. CM/Cherry can go after you for violating it. BTW allegedly it's not just US but all of North America :/They would go after the US distribution not Ducky.
A Kinesis Advantage clone?
A Kinesis Advantage clone?Almost assuredly still under patent. XD
Cheers,
Correct me if I'm wrong, but only CM can ship mx green boards. Thus you may see Clear and White in North America, but not green. but hey, wouldn't be the first time I was happily mistaken.I doubt those exclusive US distribution rights would apply to Asian-oriented makers like Ducky.
Source: http://www.anandtech.com/show/6623/coolermaster-new-storm-scouts-crashing-into-eisbergs-and-cherry-mx-green
Cheers,
Sure it does. CM/Cherry can go after you for violating it. BTW allegedly it's not just US but all of North America :/
Cheers,
Correct me if I'm wrong, but only CM can ship mx green boards. Thus you may see Clear and White in North America, but not green. but hey, wouldn't be the first time I was happily mistaken.I doubt those exclusive US distribution rights would apply to Asian-oriented makers like Ducky.
Source: http://www.anandtech.com/show/6623/coolermaster-new-storm-scouts-crashing-into-eisbergs-and-cherry-mx-green
Cheers,
Sure it does. CM/Cherry can go after you for violating it. BTW allegedly it's not just US but all of North America :/
Cheers,
Keyword 'Allegedly'. I've heard nothing about this. Would be great if Mr Sklavos posted his sources.
I can also assure you that Cherry would most certainly not 'come after' MechanicalKeyboards.com for selling Ducky's with Green MX switches. There is absolutely zero legal basis for this. The only reason you don't see more Green MX boards from Ducky (and us) is because supply is low and the switches are very expensive.
Another huge reason this is far-fetched: Cherry is selling their switches to Costar - not CoolerMaster. Costar can assure exclusivity to CM - instead of other brands they manufacture (e.g. Filco) - all they want, but they have no control over Ducky's ODMs (only Cherry does). There are too many parties involved to limit distribution geographically - unless you have some very serious organization / collaboration among all parties -- HAHAHA (sorry...was that out loud?)
Smells like "journalistic" hyperbole to me.
edited for clarity and grammar ;)
Shaker,
Thanks for clearing that up for us! I didn't mean to threadcrap at all, so please forgive me :'(. I have seen it posted in a few other media articles related to CES as well. I don't know whom to contact for confirmation on this though.
If I can find some more articles referring to this I will. Again swy if I threadcrapped
The 2nd article states "Cooler Master has an exclusive contract to manufacture devices based on the green CHERRY Switch", so they very well could have something negotiated. Still, CM doesn't actually manufacture anything, and Costar seemed happy to make Green MX boards for anyone with $$$ at Computex. Also, Ducky obviously got their hands on at least 10,000 Green MX switches, so I wonder what / who exactly is 'exclusive' with what / who / where. Very muddled. It's good to know we can count on these CES reports for details!
"Cooler Master may not have a booth at CES 2013", but I "was awed by the layout of their showcase".
[Insert Picture of CM Gear on a Hotel Bed]
That one got me good! :D
Either way, I'm going to keep trying to get more Green MX (as per your requests!) from every vendor I can until someone tells me otherwise. We do sell / distribute for CM, so I'm sure they'll let me know if they need to. ;)
Oh yeah, I thought the same thing. None of the articles include official PR statements so I'm not that concerned either way, I just was bringing it up, no real motives.
The 2nd article states "Cooler Master has an exclusive contract to manufacture devices based on the green CHERRY Switch", so they very well could have something negotiated. Still, CM doesn't actually manufacture anything, and Costar seemed happy to make Green MX boards for anyone with $$$ at Computex. Also, Ducky obviously got their hands on at least 10,000 Green MX switches, so I wonder what / who exactly is 'exclusive' with what / who / where. Very muddled. It's good to know we can count on these CES reports for details!
"Cooler Master may not have a booth at CES 2013", but I "was awed by the layout of their showcase".
[Insert Picture of CM Gear on a Hotel Bed]
That one got me good! :D
Either way, I'm going to keep trying to get more Green MX (as per your requests!) from every vendor I can until someone tells me otherwise. We do sell / distribute for CM, so I'm sure they'll let me know if they need to. ;)
Hi there,http://geekhack.org/index.php?topic=40056.msg820015#msg820015
We have discussed with Cherry on putting more emphasis on Green, and due to their limited production, we will most likely be the exclusive distributor in the US. There are obviously some vendors who still have access to limited quantities but not to the scale we are aiming to bring. Also, our established channels in the US give us added exposure.
An example of our efforts to educate the general public on Green switches:
http://techreport.com/review/24461/a-first-look-at-cherry-mx-green-key-switches
We are extremely focused on building out the mechanical keyboard community with education. ...[shortened]
Pink and White Shines coming in early April :)
They finally have a picture of the Ducky Shine white keycaps showing the green backlight. No light bleed thru which is great. I was worried the white caps might let to much light come through, but these must be extra thick or something.Show Image(https://sphotos-b.xx.fbcdn.net/hphotos-prn1/886312_440012202740546_2138806547_o.jpg)
Ducky Shine 2 tenkeyless
Any thoughts on carrying Cherry MX switches? That might be too far down the food chain for you, but figured I'd ask in case it hasn't been asked already. ;D
Any thoughts on carrying Cherry MX switches? That might be too far down the food chain for you, but figured I'd ask in case it hasn't been asked already. ;D
They already sell switches.
http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=43 (http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=43)
A bit pricey if you're planning on buying in bulk, but they have them.
Any thoughts on carrying Cherry MX switches? That might be too far down the food chain for you, but figured I'd ask in case it hasn't been asked already. ;D
They already sell switches.
http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=43 (http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=43)
A bit pricey if you're planning on buying in bulk, but they have them.
Doh! How did I miss that?
Any chance you'll offer quantity discounts? $1.75 per switch is a bit steep. :eek: Or, am I missing something there too. LOL!
Is there any chance you will carry the keycool numpad w/ clear switches?
Any idea on when the PBT Dyesub keycaps are coming in?
I want to buy a 2108 Zero right now but don't want to pay $18 for two different shipments if I can avoid it.
It would be awesome if you guys could get the Plum 96 wireless board. I know there was a group buy on here a while back but I can only find it on Taobao now.
It would be awesome if you guys could get the Plum 96 wireless board. I know there was a group buy on here a while back but I can only find it on Taobao now.
Very hard to get a hold of anyone at Plum. There's several of the import brands we're always reaching out to but never get a response. This is a model we'd love to carry though, so we'll keep trying!
Any word on when the Ducky 2087 is arriving?
Any word on whether or not White Shine Keycaps are coming?
Do you have any ETA on these keyboards:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=180
(Ducky Shine TKL Purple LED with MX Browns, SKU: DK9087S2-BUSALP
Alternatively, same with Yellow LEDs (SKU: DK9087S2-BUSALY) or plain without LEDs--both with MX Brown switches)
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=72
(Cooler Master QFR with MX Browns, SKU: SGK-4000-GKCM1-US)
Both have been listed as out of stock for a while.
Thank you!!!
Gah, it just so happens that 4 of my top pick keyboards are all out of stock (and not just at your store).
That's too bad about the Duckies--didn't realize it could take that long :(
Do you have any ETA on these keyboards:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=180
(Ducky Shine TKL Purple LED with MX Browns, SKU: DK9087S2-BUSALP
Alternatively, same with Yellow LEDs (SKU: DK9087S2-BUSALY) or plain without LEDs--both with MX Brown switches.
Thank you!!!
All Ducky Shines that we don't currently have in stock are completely out with Ducky. We have been given no run date on when more might be made. I know it they do it won't be for months. :( There could be a nice shiny light at the end of this otherwise depressing tunnel, so don't get too down.
OK, what about orings?
I think WASD is too ex and have heard of orings going for a fraction of the price at industrial supply places if you know how to order. But the Amazon listings just disorient me - so many things at low prices but I don't know which o-rings are the right ones.
I'm sure most of us have multiple keyboards and can easily take 200-500 in one bag. I certainly could. Prefer blue or red rings since these are harder to find
Any more Races coming in soon?
my friend is looking for one with mx blacks and blue or green LEDs
Any more Races coming in soon?
my friend is looking for one with mx blacks and blue or green LEDs
None that I know of. Vortex is going hard on Poker 2 for the time being.
Any more Races coming in soon?
my friend is looking for one with mx blacks and blue or green LEDs
None that I know of. Vortex is going hard on Poker 2 for the time being.
all good. i was looking for one for my friends. his preferences have changed xD
speaking of which, are the poker 2s in stock soon?
Any more Races coming in soon?
my friend is looking for one with mx blacks and blue or green LEDs
None that I know of. Vortex is going hard on Poker 2 for the time being.
all good. i was looking for one for my friends. his preferences have changed xD
speaking of which, are the poker 2s in stock soon?
Hopefully in a week or two.
ShakeR any fullsize boards with actual whites (not clears) on the horizon??
ShakeR any fullsize boards with actual whites (not clears) on the horizon??
This is the one I'm getting as soon as they arrive.
http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=466
ShakeR any fullsize boards with actual whites (not clears) on the horizon??
This is the one I'm getting as soon as they arrive.
http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=466
if any company were to reintroduce super blacks it would be ducky
so are the -sold out- ducky shine II TKL keyboards ever going to be restocked?
OK, what about orings?
I think WASD is too ex and have heard of orings going for a fraction of the price at industrial supply places if you know how to order. But the Amazon listings just disorient me - so many things at low prices but I don't know which o-rings are the right ones.
I'm sure most of us have multiple keyboards and can easily take 200-500 in one bag. I certainly could. Prefer blue or red rings since these are harder to find
Any word on restocking Ducky Shine keycaps? Would also love to get pink and white sets (can't afford to buy two entire keyboards just for keycaps =/)
so are the -sold out- ducky shine II TKL keyboards ever going to be restocked?
Likely not, they have been discontinued. Newer versions will eventually be sold.
Any word on restocking Ducky Shine keycaps? Would also love to get pink and white sets (can't afford to buy two entire keyboards just for keycaps =/)
They may not ever offer them. We had even received an order list at one point, but then I was told "too many defects". I'm still waiting on available stock (if any) to become available.
I've done the same hunt from my desk as well and am highly interested in getting a couple sets of white Shine caps. No luck with the Nordic layouts, but the US ANSI sets are actually in stock @ PC Case Gear -- big problem is they don't ship internationally:Any word on restocking Ducky Shine keycaps? Would also love to get pink and white sets (can't afford to buy two entire keyboards just for keycaps =/)
They may not ever offer them. We had even received an order list at one point, but then I was told "too many defects". I'm still waiting on available stock (if any) to become available.
Hmm :( I know there's a European shop that has been selling all colors of Shine caps for a while--I saw it in the Ducky Nordic thread on DT. Looked at the vendor's store site, and indeed, all caps are there. Only problem is, ISO layout and foreign legends :(
I've done the same hunt from my desk as well and am highly interested in getting a couple sets of white Shine caps. No luck with the Nordic layouts, but the US ANSI sets are actually in stock @ PC Case Gear -- big problem is they don't ship internationally:Any word on restocking Ducky Shine keycaps? Would also love to get pink and white sets (can't afford to buy two entire keyboards just for keycaps =/)
They may not ever offer them. We had even received an order list at one point, but then I was told "too many defects". I'm still waiting on available stock (if any) to become available.
Hmm :( I know there's a European shop that has been selling all colors of Shine caps for a while--I saw it in the Ducky Nordic thread on DT. Looked at the vendor's store site, and indeed, all caps are there. Only problem is, ISO layout and foreign legends :(
http://www.pccasegear.com/index.php?main_page=product_info&cPath=113_1361&products_id=23004&zenid=a10e0462e83aba7f27528026cbfc036c
[Sorry for posting this in the MK.com section, if that's a faux pas.]
If you wanted to team up for an order, maybe we could see if somebody in Oz (rowdy, maybe?) would forward some for us? Not sure what the exchange rate and shipping costs would be, but I would gladly pay upwards of $65-70 USD (shipped) for one, $60 each for two. I have no experience requesting something like that, though.
It looks like we may get some in from Ducky though! It will probably be a month out, but I managed to talk my way into some. :)
Not a faux pas. It looks like we may get some in from Ducky though! It will probably be a month out, but I managed to talk my way into some. :)
Big high five!!! I'll be getting a set or two for sure! (White and Gray. Maybe purple).I will see your big high-five and raise you an 'attaboy' -- well done, ShakeR.
^^Quote from: boost;592045Keycool mx clearThis
I am also looking forward to the Shine white sets! Thank you ShakeR for making it happen!
Would be nice if you had some sort of mechanical keypad on your site as well as maybe some HPE's.
2x ErgoDox PCB?If you were to offer diy kits like edox and gh60 (both are open source, you can have pcbs run) that would be amazing.
ErgoDox key set?
Would be nice if you had some sort of mechanical keypad on your site as well as maybe some HPE's.
http://mechanicalkeyboards.com/search.php?keyword=&switch_id=ALL&size=Other&man=ALL&key_plastic=ALL&interface=ALL&cord_length=ALL&usb_kro=ALL&ps2_kro=ALL&x=44&y=18&in_stock=on
Wow, those Keycool keypads cost as much as their TKL keyboards! I wonder why that is :eek:
2x ErgoDox PCB?If you were to offer diy kits like edox and gh60 (both are open source, you can have pcbs run) that would be amazing.
ErgoDox key set?
Wow, those Keycool keypads cost as much as their TKL keyboards! I wonder why that is :eek:
Any idea if you'll be getting more of the Ducky Shine replacement key cap sets in stock?
For white shine sets?! As long as they come before the yots or ducky s3 TKLs I am set!
OK, this is just an off-the-wall request, but...
I just came across an HHKB keyboard stand (http://item.rakuten.co.jp/pfudirect/10000039/) on their web site. I think this could be used for all compact keyboards. It's $40, but it is made of steel.
are the black on black vortex keycaps coming back?
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=287
http://www.kc-keycool.com/product.php?mod=detail&id=16We have the Keycool 87 w/ white LEDs in brown, black, and blue MX. None of the boards we received from Keycool had special LED colors. The whole board is uniform.
keycool 87
I want white LED version again, with the orange accent. THis should be a better fit for the 87 keycaps rainbow you carry... no, this is THE keyboard that THOSE rainbow keycaps are MADE for.
I don't understand why it's not provided..it's like you carry BMW wheels but no BMW cars, what for?
http://www.kc-keycool.com/product.php?mod=detail&id=16We have the Keycool 87 w/ white LEDs in brown, black, and blue MX. None of the boards we received from Keycool had special LED colors. The whole board is uniform.
keycool 87
I want white LED version again, with the orange accent. THis should be a better fit for the 87 keycaps rainbow you carry... no, this is THE keyboard that THOSE rainbow keycaps are MADE for.
I don't understand why it's not provided..it's like you carry BMW wheels but no BMW cars, what for?
sreynolds1, please email or give me a call 9am-5pm CST Tuesday.
Info is in my sig.
Thanks.
Yeah, that makes total sense.
It's the 'Buy every last Green switch in existence' form of 'exclusive'. There aren't any contracts in place. The legal fees involved in creating such a complex contract given the number of parties involved would cost five times more than the switches themselves, so it would be impractical to begin with.
This is sort of what I figured when I read the first claim.
Using this definition, Logitech had an 'exclusive' with Brown switches for a month and half last year (still feeling this one by the way...). When are more Brown MX Blue LED Shines coming in ?!?!?
I believe it comes from this thread:
http://www.overclock.net/t/1348258/mx-cherry-green
The quote is taken from Dustin Skavakos:
"It's an amusing moment when a vendor catches you off guard with a product you think you already know about, but that's exactly what happened with CoolerMaster's new Cherry MX Green based keyboards. I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
I've not seen CM reps claim this directly. They said the following here:
http://geekhack.org/index.php?topic=39814.msg788542#msg788542
"We are always looking at offering new switch types, but the only problem is our distributors already dislike us for so many SKU offerings :) We have to keep it within reason, and if the market demand is there, we wouldn't be opposed to it. Fow now, we'll be putting a lot of effort into green switches and educating them to the masses."
I believe it comes from this thread:
http://www.overclock.net/t/1348258/mx-cherry-green
The quote is taken from Dustin Skavakos:
"It's an amusing moment when a vendor catches you off guard with a product you think you already know about, but that's exactly what happened with CoolerMaster's new Cherry MX Green based keyboards. I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
I've not seen CM reps claim this directly. They said the following here:
http://geekhack.org/index.php?topic=39814.msg788542#msg788542
"We are always looking at offering new switch types, but the only problem is our distributors already dislike us for so many SKU offerings :) We have to keep it within reason, and if the market demand is there, we wouldn't be opposed to it. Fow now, we'll be putting a lot of effort into green switches and educating them to the masses."
wait, cooler master uses a different model from original cherry green ? then why did they call it cherry green?
I believe it comes from this thread:
http://www.overclock.net/t/1348258/mx-cherry-green
The quote is taken from Dustin Skavakos:
"It's an amusing moment when a vendor catches you off guard with a product you think you already know about, but that's exactly what happened with CoolerMaster's new Cherry MX Green based keyboards. I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
I've not seen CM reps claim this directly. They said the following here:
http://geekhack.org/index.php?topic=39814.msg788542#msg788542
"We are always looking at offering new switch types, but the only problem is our distributors already dislike us for so many SKU offerings :) We have to keep it within reason, and if the market demand is there, we wouldn't be opposed to it. Fow now, we'll be putting a lot of effort into green switches and educating them to the masses."
wait, cooler master uses a different model from original cherry green ? then why did they call it cherry green?
Where do you read that in what was posted?
Its a cherry MX green switch.
Probably this part, where Dustin said:
"I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
RemedyHaloPC asked about a clarification for that line on the CM Storm subforum here (http://geekhack.org/index.php?topic=39465.msg772783#msg772783), but Rajiv never elaborated on that part in his reply. Nor did he talk about the whole exclusivity deal. Those points were basically evaded.
Probably this part, where Dustin said:
"I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
RemedyHaloPC asked about a clarification for that line on the CM Storm subforum here (http://geekhack.org/index.php?topic=39465.msg772783#msg772783), but Rajiv never elaborated on that part in his reply. Nor did he talk about the whole exclusivity deal. Those points were basically evaded.
i am confused, are you referring to photoelectric using tapatalk\?Probably this part, where Dustin said:
"I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
RemedyHaloPC asked about a clarification for that line on the CM Storm subforum here (http://geekhack.org/index.php?topic=39465.msg772783#msg772783), but Rajiv never elaborated on that part in his reply. Nor did he talk about the whole exclusivity deal. Those points were basically evaded.
Reading comprehension using Tapatalk and wrangling a 2yr old = zero!
Thanks for pointing that out, but I'm thinking that was just typical blogger/reporter/writer 'fluff', because clearly they don't have exclusive distribution rights either.
If CM wanted to do something really different they should go with those transparent switch tops or even make the switch tops match the plate color etc.
i am confused, are you referring to photoelectric using tapatalk\?Probably this part, where Dustin said:
"I thought the rep was talking about the lighting, but the switches themselves are actually a somewhat rarefied Green model different from the existing ones, and CoolerMaster has exclusive distribution rights in the States."
RemedyHaloPC asked about a clarification for that line on the CM Storm subforum here (http://geekhack.org/index.php?topic=39465.msg772783#msg772783), but Rajiv never elaborated on that part in his reply. Nor did he talk about the whole exclusivity deal. Those points were basically evaded.
Reading comprehension using Tapatalk and wrangling a 2yr old = zero!
Thanks for pointing that out, but I'm thinking that was just typical blogger/reporter/writer 'fluff', because clearly they don't have exclusive distribution rights either.
If CM wanted to do something really different they should go with those transparent switch tops or even make the switch tops match the plate color etc.
TKL with clears or greens
TKL with clears or greens
CoolerMaster has the exclusive rights to MX Greens in the United States at the moment.
TKL with clears or greens
CoolerMaster has the exclusive rights to MX Greens in the United States at the moment.
TKL with clears or greens
CoolerMaster has the exclusive rights to MX Greens in the United States at the moment.
Even so.. aren't we in the mechanicalkeyboards.com forum? Aren't they retailers that can buy stock of QFR with MX Greens and then sell them at a good price?
Any word on the of the KBT Pure's with blue switches and any sort of backlighting? Really hard to come by a 60% that's backlit right now.
Any word on the of the KBT Pure's with blue switches and any sort of backlighting? Really hard to come by a 60% that's backlit right now.
Working on this now. It's on the works. It's usually a week between each Vortex email, so no telling when I'll have anything concrete on this.
So someone please reply to my inquiry about why I was shipped a brown keycool 87 instead of the promised red please. Whatever the reason I just want to get the partial refund Caleb promised to me. I don't care what mistake was made it exhaust me to go back and forth the contradicting explanations doing me no good. Still I would prefer a Red shipped to me and then a label provided to ship back this brown one. I don't like browns for gaming, and i mainly game than type.
So someone please reply to my inquiry about why I was shipped a brown keycool 87 instead of the promised red please. Whatever the reason I just want to get the partial refund Caleb promised to me. I don't care what mistake was made it exhaust me to go back and forth the contradicting explanations doing me no good. Still I would prefer a Red shipped to me and then a label provided to ship back this brown one. I don't like browns for gaming, and i mainly game than type.
have you emailed their customer support email?
So someone please reply to my inquiry about why I was shipped a brown keycool 87 instead of the promised red please. Whatever the reason I just want to get the partial refund Caleb promised to me. I don't care what mistake was made it exhaust me to go back and forth the contradicting explanations doing me no good. Still I would prefer a Red shipped to me and then a label provided to ship back this brown one. I don't like browns for gaming, and i mainly game than type.
have you emailed their customer support email?
caleb was emailing me asking me whether i wanted a refund.. i replied promptly, ,,,that was 4 days ago...i asked again 2 days ago.. nothing.
i shall wait 2 weeks, since that's the last time i waited for replies from support until i start posting here and on facebook, where guys from there are more active
So someone please reply to my inquiry about why I was shipped a brown keycool 87 instead of the promised red please. Whatever the reason I just want to get the partial refund Caleb promised to me. I don't care what mistake was made it exhaust me to go back and forth the contradicting explanations doing me no good. Still I would prefer a Red shipped to me and then a label provided to ship back this brown one. I don't like browns for gaming, and i mainly game than type.
have you emailed their customer support email?
caleb was emailing me asking me whether i wanted a refund.. i replied promptly, ,,,that was 4 days ago...i asked again 2 days ago.. nothing.
i shall wait 2 weeks, since that's the last time i waited for replies from support until i start posting here and on facebook, where guys from there are more active
I honestly just want a Ducky Shine 3 Blue LED with Cherry MX blues. :\ Your site is sold out. If there was an option to preorder I'd hop on that right away.
how about the boxes and foam inserts that Ducky ships their keycaps in, I would buy a truckload of those for a reasonable price.
how about the boxes and foam inserts that Ducky ships their keycaps in, I would buy a truckload of those for a reasonable price.
Haha, unusual purchase. I would honestly imagine the shipping cost would make it cost-prohibitive. The shipping alone would probably be $3 / box b/c of the size.
imsto's thick cherry profile MX caps in multiple colors?
Keycool is currently selling sets of blank black 87/104 POM keysets on TaoBao. During your next Keycool restock can you import some please?
Would there be possible Phantom PCB plates? considering the Phantom PCB is now on sale from the site?
Would there be possible Phantom PCB plates? considering the Phantom PCB is now on sale from the site?
Working on it. Not sure when we'll have them.
I'd like to put together complete kits for Phantom and ErgoDox (and GH60) eventually.
Also, nice Avatar.
White and Light Gray Two-Tone Dye Sublimated PBT Keycap Sets for the following keyboards:
Leoopold FC660C
RealForce 87u
HHKB Pro 2
Aluminum case for the following keyboards:
Leopold FC660C
RealForce 87u
HHKB Pro 2
any chance to have utron?
PLUM 96, POM, MX BrownShow Image(http://img.techpowerup.org/121112/plum962.jpg)
PLUM 96, POM, MX BrownShow Image(http://img.techpowerup.org/121112/plum962.jpg)
I second this. Aliexpress is slow as molasses. Not even sure if I will get it before my "processing time" runs out on my order.
Not sure how it works to be honest. They took 2 days to verify my card payment, and said it could take up to 5 days for processing. Aliexpress has a countdown timer which is already at 5 days and 8 hours, with a total time of 10 days...i assume i'll get refunded if it doesn't come through...
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
:eek: do you guys ship to austalia?? where is rowdy.......
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
:eek: do you guys ship to austalia?? where is rowdy.......
Yep
So is there any truth to 'whites' being discontinued?
Apparently not the whites we have coming in :D
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
Do you think that you will be getting the yellow TKL's?Show Image(http://i1222.photobucket.com/albums/dd490/CurtisandCrystal/Curts%20Photos/Ducky_YellowOnYellow.jpg)
Realforce 23U Tenkeypad Black or White
Realforce 23U Tenkeypad Black or White
23UB :))
I'm also interested in that yellow edition. Very tempted to go through with that NCIX pre-order. Has there been any news when that is supposed to be available?
Yes, we'll have the Yellow on Yellow Ducky Shine 3s -- Likely well before NCIX so pre-order from them at your own risk ;)
^that means mx white right? like a green, but quieter?
^that means mx white right? like a green, but quieter?
Correct me if I am wrong but aren't the stems glued into the keycaps? ie: You will be SOL if you break one of them off.
Correct me if I am wrong but aren't the stems glued into the keycaps? ie: You will be SOL if you break one of them off.
led window keycaps, any chance to get them?
If I buy a 110 pack of clears, will you include just one matias switch so I can try them out?
I propose transparent acrylic wrist rests for TKL and perhaps full-sized keyboards. Something like what Ducky Nordic has been demonstrating. Not too wide, but comfortably wide, with a curvature or some slanting along the front. I believe there's merit for an easily-to-clean wrist rest that goes with any keyboard in terms of color and style. I like my leather Ducky wrist rest, but that "leather" shows wear and dust/dirt quite easily, while being difficult to clean.Show Image(http://www.ducky-nordic.com/ftk/dnwrf1.jpg)
I'd make it taller: it needs to be the same height as an average FilcoDucky keyboard front case height and with some slant at the front if possible, a bit of a trapezoidal wedge along the top. Doesn't need to have any logos etched onto it or be as wide.
Basically something like this, but made of acrylic (though wood would be cool too, just not as universally matching)Show Image(http://www.keyboardco.com/blog/wp-content/uploads/2013/04/combined.jpg)
A refund on my bag of 110 switches that got "returned to sender"-ed? :)
A refund on my bag of 110 switches that got "returned to sender"-ed? :)
A refund on my bag of 110 switches that got "returned to sender"-ed? :)
In the same situation as you :(
A refund on my bag of 110 switches that got "returned to sender"-ed? :)
I would say you'll have better luck sending an email to their support email or calling them.
A refund on my bag of 110 switches that got "returned to sender"-ed? :)
In the same situation as you :(A refund on my bag of 110 switches that got "returned to sender"-ed? :)
I would say you'll have better luck sending an email to their support email or calling them.
We are still waiting for them to come back...we are terribly sorry for any delay, but worldwide mail services are not very forthcoming with shipping items back to the sender...
Will you guys be restocking ALFilcoTKL_black, the Vortex aluminum cases in black? I'd love to pick up 2-3.
Will you guys be restocking ALFilcoTKL_black, the Vortex aluminum cases in black? I'd love to pick up 2-3.
+1! I have been waiting for them also.
We could, and we are. :thumb:
No ETA yet though.
Will you get phantom cases+plates and ergodox plates+cases since you have their pcb's?
Will you get phantom cases+plates and ergodox plates+cases since you have their pcb's?
Will you guys be restocking ALFilcoTKL_black, the Vortex aluminum cases in black? I'd love to pick up 2-3.
+1! I have been waiting for them also.
Me too. If you guys do get more stock in I'd suggest extra black ones, they're always they first color cases to sell out.
Dat new CM Novatouch, when it comes out
Will you get phantom cases+plates and ergodox plates+cases since you have their pcb's?
We've been working on both for months. Should have at least one of them by mid-late February.
imsto's thick cherry profile MX caps in multiple colors?
We could, and we are. :thumb:
No ETA yet though.
Will you get phantom cases+plates and ergodox plates+cases since you have their pcb's?
We've been working on both for months. Should have at least one of them by mid-late February.
I propose transparent acrylic wrist rests for TKL and perhaps full-sized keyboards. Something like what Ducky Nordic has been demonstrating. Not too wide, but comfortably wide, with a curvature or some slanting along the front. I believe there's merit for an easily-to-clean wrist rest that goes with any keyboard in terms of color and style. I like my leather Ducky wrist rest, but that "leather" shows wear and dust/dirt quite easily, while being difficult to clean.Show Image(http://www.ducky-nordic.com/ftk/dnwrf1.jpg)
I'd make it taller: it needs to be the same height as an average FilcoDucky keyboard front case height and with some slant at the front if possible, a bit of a trapezoidal wedge along the top. Doesn't need to have any logos etched onto it or be as wide.
Basically something like this, but made of acrylic (though wood would be cool too, just not as universally matching)Show Image(http://www.keyboardco.com/blog/wp-content/uploads/2013/04/combined.jpg)
Is it possible to get these multi color LED, MX clear Keycool keypads?Show Image(http://pullzone3.mybestbuyevercom.netdna-cdn.com/28892-thickbox_default/keycool-22-key-mechanical-gaming-keyboard-cherry-mx-clear-with-led.jpg)
Is it possible to get these multi color LED, MX clear Keycool keypads?Show Image(http://pullzone3.mybestbuyevercom.netdna-cdn.com/28892-thickbox_default/keycool-22-key-mechanical-gaming-keyboard-cherry-mx-clear-with-led.jpg)
Hot damn that looks amazing!
Is it possible to get these multi color LED, MX clear Keycool keypads?Show Image(http://pullzone3.mybestbuyevercom.netdna-cdn.com/28892-thickbox_default/keycool-22-key-mechanical-gaming-keyboard-cherry-mx-clear-with-led.jpg)
Hot damn that looks amazing!
Looks like we aren't going to be able to get this one... :'(
Is it possible to get these multi color LED, MX clear Keycool keypads?Show Image(http://pullzone3.mybestbuyevercom.netdna-cdn.com/28892-thickbox_default/keycool-22-key-mechanical-gaming-keyboard-cherry-mx-clear-with-led.jpg)
Hot damn that looks amazing!
Looks like we aren't going to be able to get this one... :'(
NOOOOOOOOOOO
All my hopes and dreams... :<
It would be amazing to get some Cherry MX keycaps that are Royal Blue and have Hebrew characters with English. TKL is perfectly fine. The picture I had was just full size. :D
Added an image for reference.
It would be amazing to get some Cherry MX keycaps that are Royal Blue and have Hebrew characters with English. TKL is perfectly fine. The picture I had was just full size. :D
Added an image for reference.
+1
You've got a friend in me...Hebrew Keycaps all the way...
I love that you guys are carrying Cherry MX switches. Any prospect of getting MX-Green switches?
Didn't wade through the tread, so it may have been mentioned already -- I'd be interested in a PBT caps set for the Vortex/KBT Pure Pro.
Didn't wade through the tread, so it may have been mentioned already -- I'd be interested in a PBT caps set for the Vortex/KBT Pure Pro.
Didn't wade through the tread, so it may have been mentioned already -- I'd be interested in a PBT caps set for the Vortex/KBT Pure Pro.
I saw these show up recently...like...today. But they are just doubleshot PBT 104 key sets made by vortex...currently 'out of stock', hoping that just means being received and put in the system.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=774
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=770
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=772
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=773
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=769
I saw these show up recently...like...today. But they are just doubleshot PBT 104 key sets made by vortex...currently 'out of stock', hoping that just means being received and put in the system.Haha, I just added these a few hours ago. You don't even give us the chance to get them in!
Excellent! That price though :eek: A lot higher than previous Vortex doubleshots and dye subs.Unfortunately, whenever Vortex increases our price, we must increase your price. Also keep in mind our prices include domestic shipping.
If the previous doubleshot PBT sets were like $33-ish at group buy price before shipping, it's amazing that these are twice the price. Domestic shipping is $5.25 in a small priority mail box, so still maybe $65-66 per set before fees and shipping.$33?! Man, WE should have gotten in on the group buy! :eek:
If the previous doubleshot PBT sets were like $33-ish at group buy price before shipping, it's amazing that these are twice the price. Domestic shipping is $5.25 in a small priority mail box, so still maybe $65-66 per set before fees and shipping.$33?! Man, WE should have gotten in on the group buy! :eek:
I guess Vortex is needing to pay some bills.
Didn't wade through the tread, so it may have been mentioned already -- I'd be interested in a PBT caps set for the Vortex/KBT Pure Pro.
I saw these show up recently...like...today. But they are just doubleshot PBT 104 key sets made by vortex...currently 'out of stock', hoping that just means being received and put in the system.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=774
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=770
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=772
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=773
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=769
https://www.facebook.com/Vortexgear/photos/a.604643396270041.1073741841.241720585895659/605097172891330/?type=1&theater
Sorry if it's been asked, but have you guys tried to get these dark grey thick PBT cherry profile keys?
They are now $69 shipped.If the previous doubleshot PBT sets were like $33-ish at group buy price before shipping, it's amazing that these are twice the price. Domestic shipping is $5.25 in a small priority mail box, so still maybe $65-66 per set before fees and shipping.$33?! Man, WE should have gotten in on the group buy! :eek:
I guess Vortex is needing to pay some bills.
Yeah, feng sell those others for ~$45 plus shipping I think on his ebay store now.
But these caps have a different (much better if you ask me) font so I'm guessing new tooling. And they use more color, so I guess that costs a little more.
They are now $69 shipped.If the previous doubleshot PBT sets were like $33-ish at group buy price before shipping, it's amazing that these are twice the price. Domestic shipping is $5.25 in a small priority mail box, so still maybe $65-66 per set before fees and shipping.$33?! Man, WE should have gotten in on the group buy! :eek:
I guess Vortex is needing to pay some bills.
Yeah, feng sell those others for ~$45 plus shipping I think on his ebay store now.
But these caps have a different (much better if you ask me) font so I'm guessing new tooling. And they use more color, so I guess that costs a little more.
Vortex continues to raise our prices on products. Unfortunately, there's not much we can do about that.
Hopefully it's just a matter of their production costs increasing.
Sorry if you already answered this, but when will the Bi-Color's be in stock?
Sorry if you already answered this, but when will the Bi-Color's be in stock?
Hopefully by the end of the week...
Sorry if you already answered this, but when will the Bi-Color's be in stock?
Hopefully by the end of the week...
Awesome :) Thanks.
Sorry if you already answered this, but when will the Bi-Color's be in stock?
Hopefully by the end of the week...
Awesome :) Thanks.
I'm just as eager, believe you me...
Also, any word on the Blue & Gray engraved PBT Ducky caps?
Also, any word on the Blue & Gray engraved PBT Ducky caps?
Not a blip...we do have a set of the Dark Grey PBT Dye-Subs that are featured on our G2Pros, though.
I also need one, I keep checking the site for them every day.Will you guys be restocking ALFilcoTKL_black, the Vortex aluminum cases in black? I'd love to pick up 2-3.
+1! I have been waiting for them also.
Me too. If you guys do get more stock in I'd suggest extra black ones, they're always they first color cases to sell out.
Also, any word on the Blue & Gray engraved PBT Ducky caps?Original ETA was the end of this month. However, I haven't heard anything recently regarding the caps.
I also need one, I keep checking the site for them every day.I placed an order for them late last month. Emailing now to inquire about status.
Nice, is it possible to get an email notification when they arrive?I also need one, I keep checking the site for them every day.I placed an order for them late last month. Emailing now to inquire about status.
Nice, is it possible to get an email notification when they arrive?Checking our Facebook page occasionally would be the better option. As soon as something arrives, we post something about it.
Been waiting on this: http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=630
Nice, is it possible to get an email notification when they arrive?Checking our Facebook page occasionally would be the better option. As soon as something arrives, we post something about it.
I received news that the 60% is currently in production, but still waiting for an ETA. The TKL/80% cases are next.
Also, any word on the Blue & Gray engraved PBT Ducky caps?Original ETA was the end of this month. However, I haven't heard anything recently regarding the caps.I also need one, I keep checking the site for them every day.I placed an order for them late last month. Emailing now to inquire about status.
^ do you have any other teaser pics/info?
I thought the ducky mini was just the poker 2 with backlight, but that looks totally different?
^ do you have any other teaser pics/info?Those are the only pics we've seen. Ducky is keeping the new Mini very secretive.
I thought the ducky mini was just the poker 2 with backlight, but that looks totally different?
^ do you have any other teaser pics/info?Those are the only pics we've seen. Ducky is keeping the new Mini very secretive.
I thought the ducky mini was just the poker 2 with backlight, but that looks totally different?
The original Mini, that was seen at Computex, is no more. They have completely redesigned the Mini.
I know this might be a bit of a longshot.
Any chance of stocking blank Topre Keycaps for Realforce keyboards (87u)?
I'm looking for either Red or Orange blank keycaps.
Thanks!
^ do you have any other teaser pics/info?Those are the only pics we've seen. Ducky is keeping the new Mini very secretive.
I thought the ducky mini was just the poker 2 with backlight, but that looks totally different?
The original Mini, that was seen at Computex, is no more. They have completely redesigned the Mini.
Do you think you guys will be getting any?Uhhhhhhh... YEAH! :thumb:
Did you put on some sunglasses after you typed that? :D
Have you heard any word on this upcoming new Ducky Mini?Show Image(http://i1222.photobucket.com/albums/dd490/CurtisandCrystal/Cool%20Products/Ducky-Mini_teaser_1.jpg)
Have you heard any word on this upcoming new Ducky Mini?Show Image(http://i1222.photobucket.com/albums/dd490/CurtisandCrystal/Cool%20Products/Ducky-Mini_teaser_1.jpg)
Any chances you guys will have that Duck? Literally that little plastic duck. He's so cute.
Any chances you guys will have that Duck? Literally that little plastic duck. He's so cute.
We have no idea what Ducky would want to ship with the mini shipment...based on previous experience with them, it would not be out of the question. But we have no way of knowing yes or no.
Didn't wade through the tread, so it may have been mentioned already -- I'd be interested in a PBT caps set for the Vortex/KBT Pure Pro.
I saw these show up recently...like...today. But they are just doubleshot PBT 104 key sets made by vortex...currently 'out of stock', hoping that just means being received and put in the system.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=774
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=770
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=772
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=773
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=769
They are life ! Gogogo.. ;)We currently have red, green, orange, and pink.
They are life ! Gogogo.. ;)We currently have red, green, orange, and pink.
The black and blue will be here in an hour or so! :thumb:
Now that you guys got the Vortex Double Shot in, any chance of getting any of these in later on?We have ONE with characters on it. PM/Email me.
Vortex Thick PBT Keycaps (Grey)
https://www.facebook.com/media/set/?set=a.604643396270041.1073741841.241720585895659&type=3
I'm more interested in the OEM profile blank keycaps specifically. :)
Any idea when you may get more MX Clear switch keyboards in stock? And if so which ones?Do not have an ETA.
Any news on the Filco/ ONI TKL Aluminum Case - Black (Vortex)?
Also on the grey vortex cases for Filcos?
Now that you guys got the Vortex Double Shot in, any chance of getting any of these in later on?We have ONE with characters on it. PM/Email me.
Vortex Thick PBT Keycaps (Grey)
https://www.facebook.com/media/set/?set=a.604643396270041.1073741841.241720585895659&type=3
I'm more interested in the OEM profile blank keycaps specifically. :)Any idea when you may get more MX Clear switch keyboards in stock? And if so which ones?Do not have an ETA.
They are life ! Gogogo.. ;)We currently have red, green, orange, and pink.
The black and blue will be here in an hour or so! :thumb:
They are life ! Gogogo.. ;)We currently have red, green, orange, and pink.
The black and blue will be here in an hour or so! :thumb:
Is there anything that can be gotten besides the white ABS replacements for the Race boards? Reading up on the Race S keys, I'm sorta trying to futureproof myself.
Now that you guys got the Vortex Double Shot in, any chance of getting any of these in later on?
Vortex Thick PBT Keycaps (Grey)
https://www.facebook.com/media/set/?set=a.604643396270041.1073741841.241720585895659&type=3
I'm more interested in the OEM profile blank keycaps specifically. :)
We have ONE with characters on it. PM/Email me.
Oh well, ordered a silver one just so I can actually finish my keyboard. Buying a black one when it's back in stock also.
AFIK, still in production. Have not received any additional updates.
Can you get these yellow Ducky OMG mousepads?We are getting them in. I don't yet have an ETA, but we placed an order for them last month and had to remind Ducky about our order. I'm sure they'll be in by the end of the month. :thumb:
http://www.pccasegear.com/index.php?main_page=product_info&products_id=27108&cPath=1498
Can you get these yellow Ducky OMG mousepads?We are getting them in. I don't yet have an ETA, but we placed an order for them last month and had to remind Ducky about our order. I'm sure they'll be in by the end of the month. :thumb:
http://www.pccasegear.com/index.php?main_page=product_info&products_id=27108&cPath=1498
I emailed our rep about it without response. I'll ask him again.
Hahaha you're the man Josh <3. Thanks for asking. I'm totally buying a few.Finally got a response,
I notice the Matias switches in boxes of 110 are out-of-stock. Are these due back imminently? It's not cost-effective to get to 110 switches by buying the 90 and bags of 5 you have in stock.In stock now. Order!
https://www.facebook.com/media/set/?set=a.604643396270041.1073741841.241720585895659&type=3That is correct.
Never ended up getting these in Cherry profile/blank, right?
Anything with MX clears. Had to pick up a TKL CODE from WASD with them for my wife, and I'd like one of my own (but don't give a **** about backlighting). And some full size Filco cases. Am I the only one who uses a numpad or what?No... I MUST have a numpad. My other MUST is a calculator key.
On Ducky's FB page, they show a set of yellow PBT dye-sub keycaps. Will you contact Ducky and see they have other colors available to sell and have them on your site?Yes, we will be receiving the PBT yellow dye-subs. I do not have a date at the moment though.
Anything with MX clears. Had to pick up a TKL CODE from WASD with them for my wife, and I'd like one of my own (but don't give a **** about backlighting). And some full size Filco cases. Am I the only one who uses a numpad or what?No... I MUST have a numpad. My other MUST is a calculator key.
We're getting more 60% cases in this month, then TKLs. I'll ask about fullsize.
As for clear MX boards... I wish we had some. Shoot, I'd probably be typing on one now!
Hahaha you're the man Josh <3. Thanks for asking. I'm totally buying a few.Finally got a response,
"it's hard to make it so we are think how to make it now"
So... maybe?
What about the V-60 Mini (http://geekhack.org/index.php?topic=57386.msg1303845#msg1303845)? Any plans to carry them?Yup! As of April 9th they were delayed a few weeks but were going to ship out soon after that. Emailing for updates...
What about the V-60 Mini (http://geekhack.org/index.php?topic=57386.msg1303845#msg1303845)? Any plans to carry them?Yup! As of April 9th they were delayed a few weeks but were going to ship out soon after that. Emailing for updates...
https://www.facebook.com/media/set/?set=a.604643396270041.1073741841.241720585895659&type=3
Never ended up getting these in Cherry profile/blank, right?
60% case? Awesome! Are they going to be the TEX Design ones?
Any ETA on when thick lube kits will be back?
We're getting more 60% cases in this month, then TKLs. I'll ask about fullsize.
Any news about v60 mini? I know you guys said the 9th but it isn't on the website?
Should be available this week :thumb:
Have you heard any word on the V60 MTS yet?Unfortunately no. Pretty cool idea! I hope we are able to get a few.
Have you heard any word on the V60 MTS yet?Unfortunately no. Pretty cool idea! I hope we are able to get a few.
Have you heard any word on the V60 MTS yet?Unfortunately no. Pretty cool idea! I hope we are able to get a few.
Will "60% aluminum case - blue (tex)" be in stock again?Yes. As of April 27th, they were estimated to be completed that week. I have sent another email requesting updates.
MTS will be available in August. White/Milk and clear will be available in July.
MTS will be available in August. White/Milk and clear will be available in July.
Sweet :) So you will be getting some V60 MTS...
What are you referring to "White/Milk and clear will be available in July"?
MTS will be available in August. White/Milk and clear will be available in July.
Sweet :) So you will be getting some V60 MTS...
What are you referring to "White/Milk and clear will be available in July"?
White/Milk Cherry MX and Clear Cherry MX switch versions...woot!
:thumb:
Will there be more "60% Aluminum Case - Blue (Tex)" coming in, or did I miss that boat?You missed the boat.
Will there be more "60% Aluminum Case - Blue (Tex)" coming in, or did I miss that boat?You missed the boat.
But fortunately another boat is on the way! I received confirmation overnight that the cases were completed yesterday. Quality and quantity check is under way. We should have delivery confirmation by the end of the week... which should have them here by the end of the month (hopefully next week).
:thumb:
Will there be more "60% Aluminum Case - Blue (Tex)" coming in, or did I miss that boat?You missed the boat.
But fortunately another boat is on the way! I received confirmation overnight that the cases were completed yesterday. Quality and quantity check is under way. We should have delivery confirmation by the end of the week... which should have them here by the end of the month (hopefully next week).
:thumb:
I've been trying to get my hands on a Ducky Shine 3 TKL (specifically with MX Browns and white LEDs) but it is sold out just about everywhere. Any news on when these boards might be back in stock?We ought to have more within a month or so.
Is there any way I can get a update when these will be on? Don't want to forget/miss them again.Will there be more "60% Aluminum Case - Blue (Tex)" coming in, or did I miss that boat?You missed the boat.
But fortunately another boat is on the way! I received confirmation overnight that the cases were completed yesterday. Quality and quantity check is under way. We should have delivery confirmation by the end of the week... which should have them here by the end of the month (hopefully next week).
:thumb:
-snip-
Is there any way I can get a update when these will be on? Don't want to forget/miss them again.
-snip-
Is there any way I can get a update when these will be on? Don't want to forget/miss them again.
Same, I'm going to hit the order button just about as fast as I can get to my computer once they're up.
-snip-
Is there any way I can get a update when these will be on? Don't want to forget/miss them again.
Same, I'm going to hit the order button just about as fast as I can get to my computer once they're up.
+1
Sorry if this has been answered but why are Costar stabilizer parts so expensive on MechKeyboards?
In the past I have bought stab clips from WASD, but they have been out of stock forever.
Stabilizer clips on WASD = $0.50 for 2. Stabilizer clips on MechKeyboards = $5.50 for 2.
???
I believe because the 'free shipping' is built into the price. I suggest shooting them an email inquiry seeing if they can do some combining to save on those.Couldn't have said it better myself!
60% cases should be here Friday... at least that's the current ETA. I reckon if all goes crazy they'll be here early next week.
We're receiving black, silver, red, blue, and orange.
Any chance that KBParadise with Greens will be in stock soon? LED colors don't matter for me, just the size and the switch.Depends on your definition of soon. ;)
KBP-V60-G-B/R
I'm guessing the silvers will be hot.We're getting plenty of silver and black in hopes of not running out too soon.
Plenty of black TKL cases too. :D
75% cases
Hard anodized cases for all
TKL cases have no ETA... but I'd guess July...........
75% cases
Hard anodized cases for allTKL cases have no ETA... but I'd guess July...........
75% cases
Hard anodized cases for allTKL cases have no ETA... but I'd guess July...........
75% isn't TKL...you run a site called mechanicalkeyboards.com yet don't know the difference between 75% and TKL(80%)?
75% isn't TKL...you run a site called mechanicalkeyboards.com yet don't know the difference between 75% and TKL(80%)?Read too fast. Please forgive me.
It looks like mk.com had the new stock of 60 percent tex aluminum cases.
It looks like mk.com had the new stock of 60 percent tex aluminum cases.Yep! :thumb:
Gray option mia :( I think there was one in round 1.Well, when I placed the order for these, we still had 10 gray cases. ZERO sold before a month or two ago. Then all of a sudden everyone wanted them.
I know you guys don't normally stock leopolds.
Any chance of snagging these babies -Leopold FC750R?
http://imgur.com/a/REgxZ
http://www.leopold.co.kr/?doc=cart/list.php&ca_id=101000
http://www.reddit.com/r/MechanicalKeyboards/comments/220q0q/leopold_fc750r_now_shipping_in_asia_nothis_is_not/
I know you guys don't normally stock leopolds.
Any chance of snagging these babies -Leopold FC750R?
http://imgur.com/a/REgxZ
http://www.leopold.co.kr/?doc=cart/list.php&ca_id=101000
http://www.reddit.com/r/MechanicalKeyboards/comments/220q0q/leopold_fc750r_now_shipping_in_asia_nothis_is_not/
My goodness that's an attractive keyboard.
I know you guys don't normally stock leopolds.
Any chance of snagging these babies -Leopold FC750R?
http://imgur.com/a/REgxZ
http://www.leopold.co.kr/?doc=cart/list.php&ca_id=101000
http://www.reddit.com/r/MechanicalKeyboards/comments/220q0q/leopold_fc750r_now_shipping_in_asia_nothis_is_not/
My goodness that's an attractive keyboard.
Leopolds are nice, certainly. We don't currently have any plans to carry due to their exclusivity with another company. Sorry :(, but hey, we got Ducky's exclusively...that should count for something...especially with what's coming down the pike (mini, legend, Shine 4, etc.)
I wish you guys had pictures showing the thickness of the keys you're selling. There are some sets I really like but I would be sorely disappointed if, once they were delivered, I found they had thin walls.Email me the ones you're interested in. Josh@MechanicalKeyboards.com
Im looking for POM keys of the rainbow variety. .-.
She; and totally. POM caps need to be more mainstream :p And rainbow ones need to be available. KBC rainbow jelly not enough in circulation ;-;Im looking for POM keys of the rainbow variety. .-.
^ What he said. Too much ABS/PBT - get some variety in there :D
I would be very interested in purchasing an aluminum TKL case (maybe the Vortex ones? Although I am rather apprehensive about them because I heard there are issues with their fit).
I have been looking high and low and short of buying from:
1) gonskeyboardworks.com (which isn't good if you don't want the open switch look or a full aluminum case)
2) classifieds (not reliable for obvious reasons)
there is nowhere to buy any type of custom aluminum TKL board. The only group buy I can think of that is currently open is maybe Sprit's, but that aluminum case is just a tray for a TKL board, not so much a real "case" per se.
tl;dr:
[/size]Please stock aluminum cases. (If possible, popular custom Korean ones such as KMAC2 - these are not being sold anywhere else at all so almost all sales of this in the US and countries outside of Korea in general would have to be through mk.com if stocked).
Thanks ;D
0.0 how did the blue tex cases sell out already?
ivory spacebars
ivory spacebars
Are you asking seriously of joking? Ivory is an internationally proscribed commodity. There are spacebars made of wood .. you could bleech them, maybe this approximates to what you have in mind ...
ivory spacebars
Are you asking seriously of joking? Ivory is an internationally proscribed commodity. There are spacebars made of wood .. you could bleech them, maybe this approximates to what you have in mind ...
Not sure if srs. I mean the color ivory. Like a creamy white to match my beige set.
Early June, or late June? I get sad every time I look at my CM QFR. It feels so...bloated.Any chance that KBParadise with Greens will be in stock soon? LED colors don't matter for me, just the size and the switch.Depends on your definition of soon. ;)
KBP-V60-G-B/R
He said they'll be ready for reorders in June and we'll be first on the list.
I've already submitted a purchase order. ETA is mid-July... there were a few delays but all is back on track.Early June, or late June? I get sad every time I look at my CM QFR. It feels so...bloated.Any chance that KBParadise with Greens will be in stock soon? LED colors don't matter for me, just the size and the switch.Depends on your definition of soon. ;)
KBP-V60-G-B/R
He said they'll be ready for reorders in June and we'll be first on the list.
I've already submitted a purchase order. ETA is mid-July... there were a few delays but all is back on track.Early June, or late June? I get sad every time I look at my CM QFR. It feels so...bloated.Any chance that KBParadise with Greens will be in stock soon? LED colors don't matter for me, just the size and the switch.Depends on your definition of soon. ;)
KBP-V60-G-B/R
He said they'll be ready for reorders in June and we'll be first on the list.
I've got no need of the V60; but if a V60 Matias w/ Clicky Alps variant occurs I may be forced to buy...
ivory spacebars
Are you asking seriously of joking? Ivory is an internationally proscribed commodity. There are spacebars made of wood .. you could bleech them, maybe this approximates to what you have in mind ...
Is it still looking like you will be getting the V60 MTS's sometime in August?That is still the ETA. :thumb:
Is it still looking like you will be getting the V60 MTS's sometime in August?That is still the ETA. :thumb:
I've got no need of the V60; but if a V60 Matias w/ Clicky Alps variant occurs I may be forced to buy...
When I talked to someone from KBP through email. They mentioned that they might make a few V60 MTS's with clicky switches to see how they sell.
So hopefully they do.
I've got no need of the V60; but if a V60 Matias w/ Clicky Alps variant occurs I may be forced to buy...
When I talked to someone from KBP through email. They mentioned that they might make a few V60 MTS's with clicky switches to see how they sell.
So hopefully they do.
If the clicky Matias V60 does become available - it will be sold out quick. Hopefully MK will give people a chance to preorder :(
I don't see why we wouldn't offer preorders when it gets closer to time. But we'll be sure to order enough to not run out too soon.
I don't see why we wouldn't offer preorders when it gets closer to time. But we'll be sure to order enough to not run out too soon.
Also wondering if you guys are really getting these new aluminum TEX TKL cases, and if so can you say how much they will cost?
I want GMK Olivettes. Any way to get them?
I want GMK Olivettes. Any way to get them?
Hohoho. I doubt this will happen but it would be amazing.
Also wondering if you guys are really getting these new aluminum TEX TKL cases, and if so can you say how much they will cost?
There's a new one coming??
need...
Hopefully they aren't wife angeringly expensive.. I want 1 or 2 of them!
Hopefully they aren't wife angeringly expensive.. I want 1 or 2 of them!
Already a wallet.hack trace program running...
be sure to batch the wife.exe file before rebooting...
:cool:
Hopefully they aren't wife angeringly expensive.. I want 1 or 2 of them!
Already a wallet.hack trace program running...
be sure to batch the wife.exe file before rebooting...
:cool:
Running the single-life build offers more flexibility for the user without having to deal with those nagging permissions :thumb:
Already a wallet.hack trace program running...
be sure to batch the wife.exe file before rebooting...
:cool:
I want GMK Olivettes. Any way to get them?
Hohoho. I doubt this will happen but it would be amazing.
Sounds like a job for Ivan :cool:
That is, after he finishes his three GB's that he has going on right now... busy man.
GMK Olivetti's or Cyrillic for me.
Is it still looking like you will be getting the V60 MTS's sometime in August?That is still the ETA. :thumb:
when is the tkl shine zero going to be shipped? http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=899
How come only silver and black tex cases left? Are you going to restock the other colors?
If you have everything in stock, everybody is happy :))How come only silver and black tex cases left? Are you going to restock the other colors?
Funny how when we have all the other colors, and no black or silver cases, people want them
point to ponder...
If you have everything in stock, everybody is happy :))How come only silver and black tex cases left? Are you going to restock the other colors?
Funny how when we have all the other colors, and no black or silver cases, people want them
point to ponder...
Hi
Can you tell if these keycaps are thick or thin, Cherry profile or oem?
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=858
Thanks
edit: sorry if i posted in the wrong thread, I didn't read the title correctly
How can it be DCS profile if it's from Ducky? Ducky is working with SP now?
How can it be DCS profile if it's from Ducky? Ducky is working with SP now?
Pardon my Newbness...it is the standard Ducky profile and the keys are not all the same height. What would we call it if not DCS?
How can it be DCS profile if it's from Ducky? Ducky is working with SP now?
Pardon my Newbness...it is the standard Ducky profile and the keys are not all the same height. What would we call it if not DCS?
The standard ducky profile is OEM. DCS is Signature Plastic's profile that mimics the Cherry profile but isn't exactly Cherry profile.
zero+badass
Any word on the Vortex TKL cases, or the new TEX aluminum TKL cases?
Looking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php
Any word on the Vortex TKL cases, or the new TEX aluminum TKL cases?
Get them while they are smokin' (just no silver atm):
http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=44
better be genuine cherry
Oh man.. I need to figure out where to get some extra cash for one of those TKL cases :o
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
Oh man.. I need to figure out where to get some extra cash for one of those TKL cases :o
Be carefull...just ask Dante...
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
It says on the page they are Kaihua Kailh switches.
Good luck to mechanicalkeyboards, I hope you guys can sell all those keycool boards.
You would think the prices would be cheaper with the 'mx compatible' switches but I guess not.
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
It says on the page they are Kaihua Kailh switches.
Good luck to mechanicalkeyboards, I hope you guys can sell all those keycool boards.
You would think the prices would be cheaper with the 'mx compatible' switches but I guess not.
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
It says on the page they are Kaihua Kailh switches.
Good luck to mechanicalkeyboards, I hope you guys can sell all those keycool boards.
You would think the prices would be cheaper with the 'mx compatible' switches but I guess not.
We wish they would be cheaper too, but so far my Kailh Switched Sample that Keycool sent has not disappointed me in the least. Any time something new comes out, naysayers abound. I have faith in this new switch unlike most...
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
It says on the page they are Kaihua Kailh switches.
Good luck to mechanicalkeyboards, I hope you guys can sell all those keycool boards.
You would think the prices would be cheaper with the 'mx compatible' switches but I guess not.
We wish they would be cheaper too, but so far my Kailh Switched Sample that Keycool sent has not disappointed me in the least. Any time something new comes out, naysayers abound. I have faith in this new switch unlike most...
Until they make a copy that corresponds to MX clear I don't care either way :D
better be genuine cherryLooking for a Keycool 84 with preferably MX blues (that or MX clears). Grey colour preferred or white colour. It seems you've been out of stock for a while now.
MechanicalKeyboards.com is about to get a SMACKDOWN on KEYCOOL: http://mechanicalkeyboards.com/incoming.php (http://mechanicalkeyboards.com/incoming.php)
also fyi, first KC84 I had was flawless, 2nd KC84 had PCB issues that were solved with some solder work.
It says on the page they are Kaihua Kailh switches.
Good luck to mechanicalkeyboards, I hope you guys can sell all those keycool boards.
You would think the prices would be cheaper with the 'mx compatible' switches but I guess not.
We wish they would be cheaper too, but so far my Kailh Switched Sample that Keycool sent has not disappointed me in the least. Any time something new comes out, naysayers abound. I have faith in this new switch unlike most...
We wish they would be cheaper too, but so far my Kailh Switched Sample that Keycool sent has not disappointed me in the least. Any time something new comes out, naysayers abound. I have faith in this new switch unlike most...
We wish they would be cheaper too, but so far my Kailh Switched Sample that Keycool sent has not disappointed me in the least. Any time something new comes out, naysayers abound. I have faith in this new switch unlike most...
Just odd that you're a Cherry authorized dealer and they haven't come out and said, "You're selling Kailh?? OH NO YOU DIDN"
Until they make a copy that corresponds to MX clear I don't care either way :D
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
ooooh, what's an Ergo Clear switch?
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
ooooh, what's an Ergo Clear switch?
Clear stem w/ brown/red spring.
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
ooooh, what's an Ergo Clear switch?
Clear stem w/ brown/red spring.
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
ooooh, what's an Ergo Clear switch?
Clear stem w/ brown/red spring.
Then, that is essentially what the brown K-Switch (mx compatible) is. It feels as light as a red/brown, but also has the light tactility of a clear...try it Mikey, you might like it...
Kailh could really one up Cherry if they came out with a Ergo Clear switch.
ooooh, what's an Ergo Clear switch?
Clear stem w/ brown/red spring.
Then, that is essentially what the brown K-Switch (mx compatible) is. It feels as light as a red/brown, but also has the light tactility of a clear...try it Mikey, you might like it...
So it looks like you are only stocking 5 of each board - is this a test run?
Also are you planning on stocking K switches for repairs or for crazy bastards to make a board out of them?
Will you let us know when mkawas R2 Lube kits (http://geekhack.org/index.php?topic=59895) are available?
You can say that. Keycool has such a large catalog that in order to try to carry everything they have available for those interested here in the states, we purchased them here and there. Add to that the vehement angst against the Kailh MX-Compatible switch...but mostly it was due to the overall performance of the last keycool run...we like keycool as a brand and we trust that they know what they are doing with these switches and I will tell you why:
They have been in business a long time.
They could sell only keyboards with Cherry MX and not be able to sell them due to the Chinese Cherry Switch shortage, or...
They can sell them using a switch type that is readily available and continue to sell keyboards.
Simply put, use Cherry Switches = No keyboard sales
Use Kailh Switches = Sell as many as they can...sounds like a good business plan to me, despite the naysayers.
And believe me, Cherry MX switches have their problems too...
You can say that. Keycool has such a large catalog that in order to try to carry everything they have available for those interested here in the states, we purchased them here and there. Add to that the vehement angst against the Kailh MX-Compatible switch...but mostly it was due to the overall performance of the last keycool run...we like keycool as a brand and we trust that they know what they are doing with these switches and I will tell you why:
They have been in business a long time.
They could sell only keyboards with Cherry MX and not be able to sell them due to the Chinese Cherry Switch shortage, or...
They can sell them using a switch type that is readily available and continue to sell keyboards.
Simply put, use Cherry Switches = No keyboard sales
Use Kailh Switches = Sell as many as they can...sounds like a good business plan to me, despite the naysayers.
And believe me, Cherry MX switches have their problems too...
I'm still hesitant to get a Keycool if they have Kailh switches... Also, you guys are only stocking the white Keycool 84? No more grey? :(
I would love to know this as well.Will you let us know when mkawas R2 Lube kits (http://geekhack.org/index.php?topic=59895) are available?
Hi, do you guys have an time frame for when you'll have Tex 60% Alu cases back in stock?
Thanks!
i was wondering if you were going to restock the ducky shine white keycap sets.
Dearest friends on MK.com,
I would still like to buy the Ducky Duck. He's so cute. Please make my wish come true.
Captain BadAss
eta on the other switches for the ducky legend silver, clear or brown with white led?We are getting all they had. No ETA on other switches.
eta on the other switches for the ducky legend silver, clear or brown with white led?We are getting all they had. No ETA on other switches.
Emailed KBP. Will post with answer.
They received switches last week. They're starting on it this week and he'll be able to provide an ETA early next week.
Current ETA for V60 MTS is early to mid September.
Current ETA for V60 MTS is early to mid September.
Current ETA for V60 MTS is early to mid September.
I sincerely hope the V60 MTS gets hit hard with never ending demand. The market place really needs more high quality Alps keyboards; I hope the competition is watching.
Current ETA for V60 MTS is early to mid September.
I sincerely hope the V60 MTS gets hit hard with never ending demand. The market place really needs more high quality Alps keyboards; I hope the competition is watching.
The delay is due to quality checks. I'd prefer them test the boards before shipment rather than assuming they all work 100%... which has them leaving Aug 4. Hopefully you feel the same way.So now it's looking like August 13th like it says on the site?
If they leave Aug 4, they should be here next week. But I've extended the ETA into the following week just in case something else arises (Customs, FedEx, etc) and it gets pushes back a day or two.
So now it's looking like August 13th like it says on the site?It shouldn't be that delayed, but it's up to the 13th just in case. As of 15 mins ago, the keyboards all checked out and are being packed. The keyboards should be handed to FedEx Monday, Aug 4th with us receiving them later next week. Should something go wrong or be delayed, please give us until the 13th.
Any plans on getting those backlit PBT key caps that Vortex is coming out with? :DYep. Placed a PO yesterday. Receiving 200.
So now it's looking like August 13th like it says on the site?It shouldn't be that delayed, but it's up to the 13th just in case. As of 15 mins ago, the keyboards all checked out and are being packed. The keyboards should be handed to FedEx Monday, Aug 4th with us receiving them later next week. Should something go wrong or be delayed, please give us until the 13th.Any plans on getting those backlit PBT key caps that Vortex is coming out with? :DYep. Placed a PO yesterday. Receiving 200.
So now it's looking like August 13th like it says on the site?It shouldn't be that delayed, but it's up to the 13th just in case. As of 15 mins ago, the keyboards all checked out and are being packed. The keyboards should be handed to FedEx Monday, Aug 4th with us receiving them later next week. Should something go wrong or be delayed, please give us until the 13th.Any plans on getting those backlit PBT key caps that Vortex is coming out with? :DYep. Placed a PO yesterday. Receiving 200.
Nice. Can you tell us how much it's going to run for 1 key cap set?
So now it's looking like August 13th like it says on the site?It shouldn't be that delayed, but it's up to the 13th just in case. As of 15 mins ago, the keyboards all checked out and are being packed. The keyboards should be handed to FedEx Monday, Aug 4th with us receiving them later next week. Should something go wrong or be delayed, please give us until the 13th.Any plans on getting those backlit PBT key caps that Vortex is coming out with? :DYep. Placed a PO yesterday. Receiving 200.
Nice. Can you tell us how much it's going to run for 1 key cap set?
Are they still using that god awful font?
So now it's looking like August 13th like it says on the site?It shouldn't be that delayed, but it's up to the 13th just in case. As of 15 mins ago, the keyboards all checked out and are being packed. The keyboards should be handed to FedEx Monday, Aug 4th with us receiving them later next week. Should something go wrong or be delayed, please give us until the 13th.Any plans on getting those backlit PBT key caps that Vortex is coming out with? :DYep. Placed a PO yesterday. Receiving 200.
Nice. Can you tell us how much it's going to run for 1 key cap set?
Are they still using that god awful font?
I believe it will be like these
http://geekhack.org/index.php?topic=61149.0 (http://geekhack.org/index.php?topic=61149.0)
Nice. Can you tell us how much it's going to run for 1 key cap set?I don't even know our cost yet. :-[
Are they still using that god awful font?https://www.facebook.com/MechanicalKeyboards/posts/765495300160681
How will these work if the LED's are under the switch as opposed to on top? Thinking of using them on the KBP V60 which has the LED's on the bottom of the switch :/Nice. Can you tell us how much it's going to run for 1 key cap set?I don't even know our cost yet. :-[Are they still using that god awful font?https://www.facebook.com/MechanicalKeyboards/posts/765495300160681
How will these work if the LED's are under the switch as opposed to on top? Thinking of using them on the KBP V60 which has the LED's on the bottom of the switch :/It'll work similar to LEDs on top and characters on bottom...
So basically dark unless the brightness of LED's is turned up to max.How will these work if the LED's are under the switch as opposed to on top? Thinking of using them on the KBP V60 which has the LED's on the bottom of the switch :/It'll work similar to LEDs on top and characters on bottom...Show Image(https://scontent-a.xx.fbcdn.net/hphotos-xfp1/t1.0-9/q74/s720x720/10534754_722020544532325_1088504802727383835_n.jpg)
So basically dark unless the brightness of LED's is turned up to max.How will these work if the LED's are under the switch as opposed to on top? Thinking of using them on the KBP V60 which has the LED's on the bottom of the switch :/It'll work similar to LEDs on top and characters on bottom...Show Image(https://scontent-a.xx.fbcdn.net/hphotos-xfp1/t1.0-9/q74/s720x720/10534754_722020544532325_1088504802727383835_n.jpg)
Quote from: boost;592045Keycool mx clearNo such Kailh Switch yet. Keycool has gone completely MX Compatible Kailh switch now. And Kailh only produces their versions of Red, Black, Blue, and Brown MX. Sorry...
Weird.Ouch...in the words of Angus McLeod, "There can be only ONE!"Was I looking under the wrong SKU? They were showing out of stock just yesterday, and still on Amazon.I may have actually confused you guys with another vendor. /embarrassed
Very tricky... :cool: Thanks for the link.
Will you guys be getting the new Ducky Mini carrying cases found on their website? - http://www.duckychannel.com.tw/en/ducky-mini/index.html (at the bottom). Thanks!Yup.
Any idea on when??? ;)Will you guys be getting the new Ducky Mini carrying cases found on their website? - http://www.duckychannel.com.tw/en/ducky-mini/index.html (at the bottom). Thanks!Yup.
Any word on when the KUL ES-87 colorful painted top cases will be available?They should be available mid-late August.
Any idea on when??? ;)I assume we'll receive them w/ the Minis.
Any idea on when??? ;)I assume we'll receive them w/ the Minis.
Can you guys think of a MX clears board other than Wasdkeyboard ?
Full size no backlit , generic look (bringing it to office )
Just saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
Just saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
Yes, we will be getting both CNC and cast frame. ETA is 2-8 weeks from Aug 5. Unsure if they'll be plate mounted.
Yes, we will be getting both CNC and cast frame. ETA is 2-8 weeks from Aug 5. Unsure if they'll be plate mounted.
or Greens?Yes, we will be getting both CNC and cast frame. ETA is 2-8 weeks from Aug 5. Unsure if they'll be plate mounted.
Do you think there is any chance they'll offer clears?
Do you guys know when those KUL summer cases will become available?
It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.
It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.Better off getting a GON NerD60, the GH60 won't likely be available any time soon.
It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.Better off getting a GON NerD60, the GH60 won't likely be available any time soon.
The final design hasn't been made available online yet, that's an older revision with a couple of problems on it. Basically the GB has stalled and komar isn't releasing the final revision online until the GB has been completed.It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.Better off getting a GON NerD60, the GH60 won't likely be available any time soon.
That's unfortunate to hear. Is there a reason why? The PCB design is freely available on komar's blog (http://blog.komar.be/projects/gh60-programmable-keyboard/) so I was under the impression that it would be fairly painless to have it produced by a PCB manufacturer.
The final design hasn't been made available online yet, that's an older revision with a couple of problems on it. Basically the GB has stalled and komar isn't releasing the final revision online until the GB has been completed.It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.Better off getting a GON NerD60, the GH60 won't likely be available any time soon.
That's unfortunate to hear. Is there a reason why? The PCB design is freely available on komar's blog (http://blog.komar.be/projects/gh60-programmable-keyboard/) so I was under the impression that it would be fairly painless to have it produced by a PCB manufacturer.
IMSTO or GON will be your best bet for plates.The final design hasn't been made available online yet, that's an older revision with a couple of problems on it. Basically the GB has stalled and komar isn't releasing the final revision online until the GB has been completed.It's been about a year since I last heard it mentioned, but I just wanted to see how the GH60 plans are coming along. I'd really love to be able to purchase a PCB and a plate since I wasn't able to get in on the group buy.Better off getting a GON NerD60, the GH60 won't likely be available any time soon.
That's unfortunate to hear. Is there a reason why? The PCB design is freely available on komar's blog (http://blog.komar.be/projects/gh60-programmable-keyboard/) so I was under the impression that it would be fairly painless to have it produced by a PCB manufacturer.
Gotcha, thanks. Maybe it's time for a [CTRLALT 60 version of the NerD60 PCB then. Unfortunately it looks like most of the 60% plate group buys are either over or stalled right now and I can't seem to find a relatively inexpensive option.
Current ETA for V60 MTS is early to mid September.
I figured they would say something like that.
Thanks again for the update.
Current ETA for V60 MTS is early to mid September.
I figured they would say something like that.
Thanks again for the update.
V60MTS is now on the Incoming MK page! :D
(Sept 16th - Oct 17th)
Current ETA for V60 MTS is early to mid September.
I figured they would say something like that.
Thanks again for the update.
V60MTS is now on the Incoming MK page! :D
(Sept 16th - Oct 17th)
Nice :thumb:
It has the add to cart option. That means we can pre order it correct?
Current ETA for V60 MTS is early to mid September.
I figured they would say something like that.
Thanks again for the update.
V60MTS is now on the Incoming MK page! :D
(Sept 16th - Oct 17th)
Nice :thumb:
It has the add to cart option. That means we can pre order it correct?
I believe that's the case!
V60MTS keycap images from KBP facebook (the ones on MK look like prototype)Show Image(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10562660_953671484658325_6623646091651392237_o.jpg)
V60MTS keycap images from KBP facebook (the ones on MK look like prototype)Yup, the only actual picture released of the keyboard thus far.
It has the add to cart option. That means we can pre order it correct?Not quite yet. Once it gets a little closer to the ETA we will make it available for preorder. We'd prefer not to hold your money for 2 months if it does indeed take until mid-Oct to arrive.
It has the add to cart option. That means we can pre order it correct?Not quite yet. Once it gets a little closer to the ETA we will make it available for preorder. We'd prefer not to hold your money for 2 months if it does indeed take until mid-Oct to arrive.
Are the Ducky mini's still looking like they're gonna get to you guys on the 25th?They should be leaving Taiwan on the 25th... which will get them here before the end of next week.
Edit: just saw the change today, bummer!
Im having trouble finding a white poker 2 with cherry mx blues with backlit keys do you guys have one or know where I can find oneAll we have are non-LED Poker IIs in white. http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=924
Would it be possible to get ErgoDox cases without the logo? It looks like the silver one is logo-free, but ideally I'd like to get a black one with a clean look.
Ducky Mini pushed back even further... http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=989
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO :'( :'( :'( :'( :'( :'( :'( :'(
They were supposed to ship yesterday. I don't have a tracking number though.Status unchanged.
Were you expecting a tracking number and that's why you guys just decided to push that date to the 5th?They were supposed to ship yesterday. I don't have a tracking number though.Status unchanged.
;_; I'm literally crying.They were supposed to ship yesterday. I don't have a tracking number though.Status unchanged.
Status HAS changed! The Minis should be delivered TODAY!!WOOOOOHOOOOO!!!!! :eek:
Status HAS changed! The Minis should be delivered TODAY!!
We're packing and shipping orders until 5pm.Don't forget mine! ;) Lol thanks for the good work as always guys! :thumb:
YOURS will wait until Tuesday. :pNOOOOOOOOOOOOOOOOOOOO!!!! You guys are torturing my soul! :'( :'( :'(
YOURS will wait until Tuesday. :pNOOOOOOOOOOOOOOOOOOOO!!!! You guys are torturing my soul! :'( :'( :'(
Well I even bought a KBP V60 to hold me over from them and this is what I get! HMPF! Not fair! :(..... lolYOURS will wait until Tuesday. :pNOOOOOOOOOOOOOOOOOOOO!!!! You guys are torturing my soul! :'( :'( :'(
so im back stateside and i haven't taken my mini out of the box since i removed it from my suitcase
just saying :P
We're packing and shipping orders until 5pm.
We're packing and shipping orders until 5pm.Mine made it out today, just wanted to thank you a ton for your hard work! I can't wait to enjoy it. Thanks again guys, you're awesome.
^This.We're packing and shipping orders until 5pm.Mine made it out today, just wanted to thank you a ton for your hard work! I can't wait to enjoy it. Thanks again guys, you're awesome.
Is the NEO KB-87 something you guys can get? I'm having a hard time finding any information about them newer than 2012.Didn't want this to get lost amongst the Choc Mini celebration. :)
Yes, we will be getting both CNC and cast frame. ETA is 2-8 weeks from Aug 5. Unsure if they'll be plate mounted.
Any ETA for when you will be receiving the Ducky Mini Keyboard Carrier (Sleeve Case)?We should have them tomorrow or Friday.
I'm ready to pre-order at least 2.
Any ETA for when you will be receiving the Ducky Mini Keyboard Carrier (Sleeve Case)?We should have them tomorrow or Friday.
I'm ready to pre-order at least 2.
Just sent you guys an email explaining a big problem I am having with my ducky mini.Any ETA for when you will be receiving the Ducky Mini Keyboard Carrier (Sleeve Case)?We should have them tomorrow or Friday.
I'm ready to pre-order at least 2.
Sent you guys another email explaining what I would like to do concerning my ducky mini issue. Thanks!Any ETA for when you will be receiving the Ducky Mini Keyboard Carrier (Sleeve Case)?We should have them tomorrow or Friday.
I'm ready to pre-order at least 2.
Last night I saw on their Facebook that not only does Ducky have the little plastic Duck logo toy, they now have a wooden model of their logo. Is it possible to get either of these?
Edit: I know I asked about the plastic Duck before and I'm still very interested in one.
Rainbow POM keycaps (full set), dang I have been looking for these for so long!
Sorry if this has been answered before, but would it be possible for you guys to stock Leopold FC660C's (especially the white two toned version)?
Or do you have to have some kind of license to sell Leopold products?
Hi do you guys stock mx cherry switch stickers? I'm looking cyan coloured ones.
hello, thanks for the reply. fyi this is the one i am looking for http://puu.sh/brbs1/c5a0299fb5.jpgRainbow POM keycaps (full set), dang I have been looking for these for so long!
We may be interested in POM if we can find a source at the right price...
Zero, any chance you can give me a thumbs up/down on the Neo KB-87 Zelia? I asked a page or two back but didn't get a response.Hi do you guys stock mx cherry switch stickers? I'm looking cyan coloured ones.
Possible, but not likely.
How long do you think it would take to try get them in stock?Hi do you guys stock mx cherry switch stickers? I'm looking cyan coloured ones.
Possible, but not likely.
Zero, any chance you can give me a thumbs up/down on the Neo KB-87 Zelia? I asked a page or two back but didn't get a response.
Zero, any chance you can give me a thumbs up/down on the Neo KB-87 Zelia? I asked a page or two back but didn't get a response.
What is it beyond being a TKL...
Have you guys received any new information regarding those new "engraved" Pures?
Is it possible for you guys to bring in the poker x again? Or is it out of production already?Poker X has been discontinued for some time now unfortunately.
Is it possible for you guys to bring in the poker x again? Or is it out of production already?Poker X has been discontinued for some time now unfortunately.
Thanks, Dante!
Thanks, Dante!
When are you guys going to accept preorders on the V60MTS?
You can go ahead and place your order.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=987
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=988
You can go ahead and place your order.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=987
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=988
hello, thanks for the reply. fyi this is the one i am looking for http://puu.sh/brbs1/c5a0299fb5.jpgRainbow POM keycaps (full set), dang I have been looking for these for so long!
We may be interested in POM if we can find a source at the right price...
if you can get me just 1 set I will be so happy, thanks!
You can go ahead and place your order.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=987
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=988
Any chance of stocking a wider selection of PCB mounted MX switches? I'd really like to get my hands on some red and possibly brown PCB switches and I can't find any place that has them.Some additional switches will be added today.
For keyboards, 99% of the time. Depends on the shipping method, location, weight, etc. Majority of accessories go USPS.You can go ahead and place your order.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=987
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=988
Do you guys use FedEx for shipping within the US?
Do you guys think you could contact KBParadise and ask for V60MTS keyboard kits for soldering minus the switches? (People can order Matias switches from you or use Vintage ones)I will email them.
Any chance of stocking a wider selection of PCB mounted MX switches? I'd really like to get my hands on some red and possibly brown PCB switches and I can't find any place that has them.Some additional switches will be added today.
Great selection, thank you!;)
Any chance to restock these, or better yet, the dyesub version?Ducky will begin producing keycaps again in late November. I do not yet know which sets will be available.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=862
Ducky will begin producing keycaps again in late November. I do not yet know which sets will be available.
I would like to see dye-sub blue & grey, and green & white ducky sets.
We would love to see that too...not sure why they made only the Yellow sets available...
We would love to see that too...not sure why they made only the Yellow sets available...
If anyone has the bargaining power to convince them, it's you guys :thumb:
Some additional [PCB] switches will be added today.
Show Image(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10341706_979681495390657_2281845521651504270_n.jpg?oh=befbd7cdea698f8b9875c28e1adf2807&oe=54CA7AED&__gda__=1422216804_0bd4cf017a4c36ad81d976fc824dc4fd)
Is there an ETA on when you guys will be restocking Vortex Blue - Bi-Color PBT Double Shot Keycap Sets?
Someone on reddit was saying you guys are getting more DK-9008 G2 Pro with the blue and gray dyesubs, is that accurate info, and if so, any ETA?
Well, "someone" on Reddit has more information about our company than we do. I have no ETA, nor order placed, for any dyesub keyboards (or keycaps). As far as I've been told by Ducky, only Shine 3s and Zeros are available at this time. Legends, Shine 4, and YOTH are being produced currently.
For keyboards, 99% of the time. Depends on the shipping method, location, weight, etc. Majority of accessories go USPS.You can go ahead and place your order.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=987
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=988
Do you guys use FedEx for shipping within the US?
Do you guys think you could contact KBParadise and ask for V60MTS keyboard kits for soldering minus the switches? (People can order Matias switches from you or use Vintage ones)I will email them.
What shipping company do you use when some one chooses the free shipping?Keyboards typically ship FedEx, rarely USPS. Accessories are USPS.
Also did you ever hear anything back from KBParadise about this?Nothing yet.
What shipping company do you use when some one chooses the free shipping?Keyboards typically ship FedEx, rarely USPS. Accessories are USPS.Also did you ever hear anything back from KBParadise about this?Nothing yet.
Oh, have you heard anything else about the KBT Pure "engraved" models?I'll email Vortex and see if they have any updated info.
Or these wrist rests?Show Image(https://scontent-b-mia.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10653823_989036127788527_4824529645251479037_n.jpg?oh=24113fb0ebe142a900d6b4a1bc062030&oe=54F73A7B)
Will you guys be carrying this? Year of the Horse Ducky Mini post on the Ducky Facebook page.Of course! :D
Will you guys be carrying this? Year of the Horse Ducky Mini post on the Ducky Facebook page.
...I'm sad it doesn't have the ultra cute Ducky Mini duck
Oh, have you heard anything else about the KBT Pure "engraved" models?
Or these wrist rests?Show Image(https://scontent-b-mia.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10653823_989036127788527_4824529645251479037_n.jpg?oh=24113fb0ebe142a900d6b4a1bc062030&oe=54F73A7B)
We'll be making our own wooden wrist rests once our CNC machine is back up and running. We have a few imperfect models if you'd like to PM or email me.
Show Image(http://tapatalk.imageshack.com/v2/14/10/09/797e7bcb8a06704c4cc484488a95eb40.jpg)
Will you guys be carrying this? Year of the Horse Ducky Mini post on the Ducky Facebook page.
...I'm sad it doesn't have the ultra cute Ducky Mini duck
Show Image(http://tapatalk.imageshack.com/v2/14/10/09/797e7bcb8a06704c4cc484488a95eb40.jpg)
Will you guys be carrying this? Year of the Horse Ducky Mini post on the Ducky Facebook page.
...I'm sad it doesn't have the ultra cute Ducky Mini duck
what's the difference between the year of the horse edition and the regular one?
CPTBadAss: Year of the Horse is now listed on the Incoming (http://mechanicalkeyboards.com/incoming.php) page.
Emailed our Ducky rep about that yesterday, actually. He's waiting to hear back from the owner.
This entire thread was 'rolled back', so here it is again.
Name anything related to Mechanical Keyboards (boards, caps, frames, etc.) that you want (be specific) and can't currently get for any reason, and we'll do our best to get it.
Manufacturer contact information is greatly appreciated and will greatly increase our ability to get what you're looking for.
Clears or greens...the choice is so hard :'(
Clears or greens...the choice is so hard :'(
That's the choice I'm making now. It'd be nice to have a stock board that I didn't have to modify. But we'll see how this works out :).
Emailed our Ducky rep about that yesterday, actually. He's waiting to hear back from the owner.
Clears or greens...the choice is so hard :'(
Any word on the V60 MTSs?
Should ship from KBP Mon or Tues.
I'm looking for the Hammer Case in Silver, which I don't think is available currently. Would love if you could somehow stock it!
There's a knockoff available right now but I think there's still demand for the real deal.
Can you stock on KBT Pures? :DI don't think it's even in production anymore unfortunately. I think just the pure pro is available, but KBTalking was teasing a new version of the pure coming out soon, not sure exactly when though.
Can you stock on KBT Pures? :D
Just saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
Can you stock on KBT Pures? :DJust saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
Oh yeah :)
https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17 (https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17)
Oh yeah :)
https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17 (https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17)
They sort of butchered the sites URL though: "mechnicalkeybords.com" ;)
Oh yeah :)
https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17 (https://m.facebook.com/KBParadise/photos/pcb.998305800194893/998302310195242/?type=1&source=49&refid=17)
They sort of butchered the sites URL though: "mechnicalkeybords.com" ;)
They are slightly closer today: "mechnicalkeyboards.com"
Got my shipping notifications today.
Thanks guys :)
Got my shipping notifications today.
Thanks guys :)
You will be pleased with the keyboard, I am sure...it has made me rethink 60%'s in a good way.
Got my shipping notifications today.
Thanks guys :)
You will be pleased with the keyboard, I am sure...it has made me rethink 60%'s in a good way.
Good to hear. Did you like the clicky, or the quiet click better?
Got my shipping notifications today.
Thanks guys :)
You will be pleased with the keyboard, I am sure...it has made me rethink 60%'s in a good way.
Good to hear. Did you like the clicky, or the quiet click better?
I prefer quite in most instances, and there are no exceptions.
Is there an ETA for a restock on plate mounted MX clear switches? Thanks!
I thought about doing that, but I'm going to be ordering about 200 switches for 3 60% boards. That's a lot of cutting. :) If a restock is right around the corner I don't mind waiting a little bit.
No worries, thanks! Time to break out the flush cutters. :)
PBT spacebars for Topre switches (RF 87u and HHKB Pro 2).
The current problem is that apparently Topre and PFU do not make PBT spacebars for their keyboards (Realforce 87u/104u and HHKB Pro 2, respectively). All the other keycaps on these boards are made of PBT, but the spacebars are ABS. I am hoping that someone might be persuaded to make PBT spacebars for these keyboards.PBT spacebars for Topre switches (RF 87u and HHKB Pro 2).
That all depends on if/when we begin to stock more Topre keyboards beyond the Type Heaven.
Im looking for POM keys of the rainbow variety. .-.
^ What he said. Too much ABS/PBT - get some variety in there :D
Im looking for POM keys of the rainbow variety. .-.
^ What he said. Too much ABS/PBT - get some variety in there :D
I'm looking for a complete set of the POM Rainbow & Clear Jellies too
Will you guys be selling the new matias linear switches?
Im looking for POM keys of the rainbow variety. .-.
^ What he said. Too much ABS/PBT - get some variety in there :D
I'm looking for a complete set of the POM Rainbow & Clear Jellies too
I believe KBC was the company who made these. They've been out of production for at least two years; every person I've talked to who has bought them loves them and refuses to part with them.
Will you guys be selling the new matias linear switches?
Thanks for bringing it to our attention. We will look into it.
Will you guys be selling the new matias linear switches?
Thanks for bringing it to our attention. We will look into it.
Wouldn't hurt to ask KBP if they will release a V60 w/ Linear Alps too. :D
I'm one of KBP. Yes , we will ask Matias if possible to release Quiet Linear switch. If we can get the switch, for sure , we will make this version soon.
I'm one of KBP. Yes , we will ask Matias if possible to release Quiet Linear switch. If we can get the switch, for sure , we will make this version soon.
I'm one of KBP. Yes , we will ask Matias if possible to release Quiet Linear switch. If we can get the switch, for sure , we will make this version soon.
Any chance that you will offer other keycap sets for the V60 MTS?
I'm one of KBP. Yes , we will ask Matias if possible to release Quiet Linear switch. If we can get the switch, for sure , we will make this version soon.
Any chance that you will offer other keycap sets for the V60 MTS?
Gin up support on the IC regarding Taohao sets and we will be behind it. I will have to dig up the link for you...
I'm one of KBP. Yes , we will ask Matias if possible to release Quiet Linear switch. If we can get the switch, for sure , we will make this version soon.
Any chance that you will offer other keycap sets for the V60 MTS?
Gin up support on the IC regarding Taohao sets and we will be behind it. I will have to dig up the link for you...
There is a IC for a SP ALPS set going at the moment.
I haven't heard anything about the Tai Hao ALPS IC in a while. Do you happen to know if that's where KBP had the stock MTS caps made?
I know this has been mentioned before. Just was hoping for an update, but will you be getting the Ducky YotH in clears?
Any update on the Ducky YOTH 60% clears?
Any news on Leopold products?
Any plan on getting some springs? +1 for 45g springs here.
Any news on Leopold products?
+1 Would like to know about this as well.
So, if I wanted to bend the rules a bit, could it be done?
Namely, I destroyed a side of my ergodox, but the right hand works for sure. So I should only need one board ... and want to buy a bunch of switches so was thinking of combining the order ... for the, uh, shipping savings.
Anyway, is there a means to add / pay for one board? Also it might be a week before I order because of budgeting concerns but it would be useful to know if there's a process for such things.
I know this has been mentioned before. Just was hoping for an update, but will you be getting the Ducky YotH in clears?Any update on the Ducky YOTH 60% clears?
The update is that there will be Green MX versions available. We don't expect any Clears, but one never knows what Ducky throws on last minute...
Saw that myself. From what I've read, I guess I should stay clear of those and buy blacks if I want something close to clears? Greens seem to hard.I know this has been mentioned before. Just was hoping for an update, but will you be getting the Ducky YotH in clears?Any update on the Ducky YOTH 60% clears?
The update is that there will be Green MX versions available. We don't expect any Clears, but one never knows what Ducky throws on last minute...
Hey man maybe you can help settle something. I just noticed that YOTH is now also available with MX Whites. Obviously you guys must have witnessed the incredible inconsistencies with this switch; why do you keep carrying boards with it? Am I just anal retentive and most people don't care?
I know this has been mentioned before. Just was hoping for an update, but will you be getting the Ducky YotH in clears?Any update on the Ducky YOTH 60% clears?
The update is that there will be Green MX versions available. We don't expect any Clears, but one never knows what Ducky throws on last minute...
Hey man maybe you can help settle something. I just noticed that YOTH is now also available with MX Whites. Obviously you guys must have witnessed the incredible inconsistencies with this switch; why do you keep carrying boards with it? Am I just anal retentive and most people don't care?
Just saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
I know this has been mentioned before. Just was hoping for an update, but will you be getting the Ducky YotH in clears?Any update on the Ducky YOTH 60% clears?
The update is that there will be Green MX versions available. We don't expect any Clears, but one never knows what Ducky throws on last minute...
Hey man maybe you can help settle something. I just noticed that YOTH is now also available with MX Whites. Obviously you guys must have witnessed the incredible inconsistencies with this switch; why do you keep carrying boards with it? Am I just anal retentive and most people don't care?
We are only receiving a limited supply of White MX keyboards. Dissenting opinions abound in the world of Cherry MX switches, and our goal is to carry as many flavors of them as possible to suit the growing population of tastes out there. White Cherry MX is no exception. We are sorry that it may not be preferred by all, but there are those who specifically desire this switch type. We are increasingly apologetic when it comes to Clear MX switches as these are highly sought after across the board. At the end of the day, we carry what we can as Ducky produces what they can with the switch types they have available to send us here outside the Asian market. Not the answer many would like to hear, but it is all that we have regarding our ability to carry various switch types. Thank you. Super guy. :thumb:
do you guys have a kbt race2 white frame brown switch in stock? how many days i can get it after pay?
Just saw a thread saying a new Pure is coming out with engraved caps, and two kinds of metal cases.Yup Yup.
http://kbtalking.cool3c.com/article/82827 (http://kbtalking.cool3c.com/article/82827)
Do you guys think you could get them?
Any word on these?
Are you guys still on track to receive Shine 4's by December 15th?
Any chance for a restock on the MX Whites YotH? Bought one and love it so much I want to get it for a friend!
Saw that you guys had the poker 2 incoming from nov 1-nov 30, but those listings disappeared today. Did you guys ever receive them or was it cancelled?
Do you guys think you could contact KBParadise and ask for V60MTS keyboard kits for soldering minus the switches? (People can order Matias switches from you or use Vintage ones)I will email them.
You guys going to carry Ducky Shine 4 hoodies?10/10 would buy.Show Image(https://scontent-a-dfw.xx.fbcdn.net/hphotos-xpa1/t31.0-8/1053372_766845796723850_724013975616351230_o.jpg)
I guess I'll ask here, but any chance you get the two-tone Vortex PBT keycaps back in stock?
It looks like the green, pink, and orange are in stock, but the blue and red have been OOS for a while.
Any idea if you will get any of the blue and red sets? TY
I've ordered two sets of switches like a day apart. I was wondering if there was any chance they could be merged together to reduce my shipping charges?If they were ordered days apart, there's a high probability they were already shipped... separately. However, I can't be certain without knowing your name, order number, etc. Feel free to PM or email me.
out of curiosity the incoming page lists "KUL ES-87 Smoke" What is this? And what happened to KUL? Weren't they supposed to release multicolored replacement top cases this summer?
out of curiosity the incoming page lists "KUL ES-87 Smoke" What is this? And what happened to KUL? Weren't they supposed to release multicolored replacement top cases this summer?
Good question on both fronts. I will have to have a sit down with JoshMK tomorrow regarding this one... :-X
You guys going to carry Ducky Shine 4 hoodies?I don't own ducky but I want a keyboard themed hoodie :-\Show Image(https://scontent-a-dfw.xx.fbcdn.net/hphotos-xpa1/t31.0-8/1053372_766845796723850_724013975616351230_o.jpg)
out of curiosity the incoming page lists "KUL ES-87 Smoke" What is this? And what happened to KUL? Weren't they supposed to release multicolored replacement top cases this summer?It's a keyboard that's expected to arrive next week. You can pre-order if you'd like. ;)
out of curiosity the incoming page lists "KUL ES-87 Smoke" What is this? And what happened to KUL? Weren't they supposed to release multicolored replacement top cases this summer?It's a keyboard that's expected to arrive next week. You can pre-order if you'd like. ;)
Waiting to hear back about the colored top cases.
You tease.out of curiosity the incoming page lists "KUL ES-87 Smoke" What is this? And what happened to KUL? Weren't they supposed to release multicolored replacement top cases this summer?It's a keyboard that's expected to arrive next week. You can pre-order if you'd like. ;)
Waiting to hear back about the colored top cases.
LOL. But what is the "smoke" for?
You tease.Correct, just different colors.
Is there anything that differentiates it from a standard KUL-ES 87? Or have they just applied some new moniker to their keyboards?
Edit: Now that I've seen the larger picture, looks like new case+caps color, is it exclusive to blues and browns at the moment?
Man KUL is lazy.
Keycool went from:Show Image(http://24.media.tumblr.com/tumblr_m44j5ctSGw1ruqdq7o7_1280.jpg)
To full trance disco rave party mode:Show Image(http://mechanicalkeyboards.com/shop/images/products/large_1067_DSC_1012.jpg)
Flamboyance is not KUL's strong suit.
Man KUL is lazy.I actually like that board. It wouldn't be my next buy, but it's pretty slick with the LED "halo" glow. Also, with the LEDs off, the caps look blank.
Keycool went from:
To full trance disco rave party mode:
Flamboyance is not KUL's strong suit.
On a side note anyone heard anything about a possible KUL numberpad?KUL has not made any mention to me about a numpad (current or future).
Man KUL is lazy.I actually like that board. It wouldn't be my next buy, but it's pretty slick with the LED "halo" glow. Also, with the LEDs off, the caps look blank.
Keycool went from:
To full trance disco rave party mode:
Flamboyance is not KUL's strong suit.Show Image(http://mechanicalkeyboards.com/shop/images/products/large_1065_DSC_1008.jpg)Show Image(http://mechanicalkeyboards.com/shop/images/products/large_1065_DSC_1015.jpg)
I've ordered two sets of switches like a day apart. I was wondering if there was any chance they could be merged together to reduce my shipping charges?
Holy crap, my first set arrived already! The extra money for shipping is worth it if it only takes 8 days!As requested previously, PM or email me your name or order number.
Will there ever be Poker IIs with the blank RGB mods in stock again?Vortex is currently producing Poker 3s with hopes of them releasing late Jan - mid Feb. Last I heard from our rep (~2 weeks), they had no blank RGBs.
Will there ever be Poker IIs with the blank RGB mods in stock again?Vortex is currently producing Poker 3s with hopes of them releasing late Jan - mid Feb. Last I heard from our rep (~2 weeks), they had no blank RGBs.
Will there ever be Poker IIs with the blank RGB mods in stock again?
No word yet, but I imagine that they will either initially or later...Will there ever be Poker IIs with the blank RGB mods in stock again?Vortex is currently producing Poker 3s with hopes of them releasing late Jan - mid Feb. Last I heard from our rep (~2 weeks), they had no blank RGBs.
Have you heard if they will be making a non-backlit version of the Poker 3?
Sell some plate mount cherry stabs in all space bar sizes, please.
6.5u spacebar (for quickfire TK) - preferably in grey PBT, although I doubt that's going to happen, so any 6.5u spacebar will be okay.
Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
I'm currently looking for the black KBC Poker 2 with cherry mx Blue switches... hope you guys have it in stock? Or at least, able to get it for me? :)
Cheers
The spacebar I mentioned is a nonstandard spacebar, it's also 6.5 u not 6.25u.No word yet, but I imagine that they will either initially or later...Will there ever be Poker IIs with the blank RGB mods in stock again?Vortex is currently producing Poker 3s with hopes of them releasing late Jan - mid Feb. Last I heard from our rep (~2 weeks), they had no blank RGBs.
Have you heard if they will be making a non-backlit version of the Poker 3?Sell some plate mount cherry stabs in all space bar sizes, please.
We will look into it.6.5u spacebar (for quickfire TK) - preferably in grey PBT, although I doubt that's going to happen, so any 6.5u spacebar will be okay.
The one at the following link should be 6.2u and I just confirmed that it does fit a QFR:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1092Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.I'm currently looking for the black KBC Poker 2 with cherry mx Blue switches... hope you guys have it in stock? Or at least, able to get it for me? :)
Cheers
We are out of stock on all Black Poker II's, and we look to stock the new Poker III's once they are released. In the meantime, we have the following custom White Poker II:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1113
The spacebar I mentioned is a nonstandard spacebar, it's also 6.5 u not 6.25u.
I'm currently looking for the black KBC Poker 2 with cherry mx Blue switches... hope you guys have it in stock? Or at least, able to get it for me? :)
Cheers
We are out of stock on all Black Poker II's, and we look to stock the new Poker III's once they are released. In the meantime, we have the following custom White Poker II:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1113
Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.
Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.
Thanks for checking! BTW I can prepay if needed.
We have not...Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.
Thanks for checking! BTW I can prepay if needed.
Did you hear back from Vortex yet?
I see you carry the red Ducky Shine WASD keycap set. Is there any chance you can get a black WASD keycap set for a Ducky Shine keyboard?
I see you carry the red Ducky Shine WASD keycap set. Is there any chance you can get a black WASD keycap set for a Ducky Shine keyboard?
You want black backlit WASD keycaps?
do you guys have any new information regarding those new KBT Pures that are coming out?
We have not...Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.
Thanks for checking! BTW I can prepay if needed.
Did you hear back from Vortex yet?
We have not...Do you guys think you can reach out to Vortex and see if you can acquire some PBT sets for the Race? This has a funky layout and it's challenging finding replacements.
We will need to get back you about this. JoshMK is sending Vortex an inquiry as I type this.
Thanks for checking! BTW I can prepay if needed.
Did you hear back from Vortex yet?
How about now? :)
I would pay handsomely for a 4.5 unit spacebar. Lots of 60% keyboards such as the Pure Pro, Filco Minila etc use them but it's impossible to find keycaps for them anywhere. PBT would be best but even ABS would be amazing. I want to build a custom board with this layout: http://www.keyboard-layout-editor.com/#/layouts/0266e105db6c8fadcfb6a181413618fc but there is nowhere that sells 4.5 unit spacebars. Perhaps vortex could be persuaded to do a group buy of them?You should check out the mod pack from Ivan's latest gmk group buy!
2 unit left shifts would be nice too, could maybe include them in the group buy.
I would pay handsomely for a 4.5 unit spacebar. Lots of 60% keyboards such as the Pure Pro, Filco Minila etc use them but it's impossible to find keycaps for them anywhere. PBT would be best but even ABS would be amazing. I want to build a custom board with this layout: http://www.keyboard-layout-editor.com/#/layouts/0266e105db6c8fadcfb6a181413618fc but there is nowhere that sells 4.5 unit spacebars. Perhaps vortex could be persuaded to do a group buy of them?You should check out the mod pack from Ivan's latest gmk group buy!
2 unit left shifts would be nice too, could maybe include them in the group buy.
Cherry Plate Stablizers
Can you be a gent and link it for us, pls?
Can we also get a good cherry switch GB going soon, with most common, and some uncommon? This would be great to go along with the stabs and stuff.
Oh wait, my bad. Sorry, I was confused. I didn't see that this was a vendor forum and thought it was a general thread, sorry for the confusion, my bad.Can we also get a good cherry switch GB going soon, with most common, and some uncommon? This would be great to go along with the stabs and stuff.
Since we are already a Cherry Corporation business partner, we stock all that they sell, so if something is out of stock on our website, it will be restocked eventually. We have no plans to do GB's for Cherry MX switches. We apologize for the inconvenience.
Oh wait, my bad. Sorry, I was confused. I didn't see that this was a vendor forum and thought it was a general thread, sorry for the confusion, my bad.Can we also get a good cherry switch GB going soon, with most common, and some uncommon? This would be great to go along with the stabs and stuff.
Since we are already a Cherry Corporation business partner, we stock all that they sell, so if something is out of stock on our website, it will be restocked eventually. We have no plans to do GB's for Cherry MX switches. We apologize for the inconvenience.
Poker 3: Are you able to say whether or not MX Greens will be available?
What about springs, don't need sprit, or even gold plated, just a place where I can buy a lot of springs at any time.
Any word on if you guys will carry the matias linear switches?Yes, we will.
When do you guys think you will get more aluminum TEX or Vortex TKL cases back in stock?They're in production. However, no ETA at this time.
When do you guys think you will get more aluminum TEX or Vortex TKL cases back in stock?They're in production. However, no ETA at this time.
Okay thanks. Are the TEX or Vortex ones in production?
Okay thanks. Are the TEX or Vortex ones in production?
TEX will likely be the only ones we will stock going forward. Quality is key.
Any plans on restocking these?Eh, kinda...
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=228
Any plans on restocking these?Eh, kinda...
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=228
We'll be getting in Shine 3 and Shine 4 gray keycaps within the next month or so.
Okay thanks. Are the TEX or Vortex ones in production?
TEX will likely be the only ones we will stock going forward. Quality is key.
Are you going to carry Tai Hao PBT doubleshots, and is there an ETA?Yes. Just placed order Friday. Should be a few weeks.
Do you happen to know if they are planning on making a silver one?I sure hope so.
Any noticeable differences between the linked caps and these new ones that you'll be getting in?The ones you linked were for the Shine 2. The new keycaps will be the same color, just for a Shine 3 and Shine 4.
Are you going to carry Tai Hao PBT doubleshots, and is there an ETA?Yes. Just placed order Friday. Should be a few weeks.Do you happen to know if they are planning on making a silver one?I sure hope so.
Hey Josh -- MX Clear PCB mount switches: You guys show you're out of stock on the 100 packs of these, but the 50 and 5 pack quantities show in stock 5+ each. Is that correct?
Sorry if this was asked and I didn't see it, but is there a time frame for re-upping KUL 87 with clears?
Sorry if this was asked and I didn't see it, but is there a time frame for re-upping KUL 87 with clears?
So far we expect the following dates to be true:
January 1st - January 31st (http://mechanicalkeyboards.com/incoming.php)<--- if you click it will be the top listing as of 1/26/2015.
Hey Josh -- MX Clear PCB mount switches: You guys show you're out of stock on the 100 packs of these, but the 50 and 5 pack quantities show in stock 5+ each. Is that correct?
Fixed...there are some 'in stock now':
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=597
Hey Josh -- MX Clear PCB mount switches: You guys show you're out of stock on the 100 packs of these, but the 50 and 5 pack quantities show in stock 5+ each. Is that correct?
Fixed...there are some 'in stock now':
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=597
#FULLOFWIN
GMK Keycaps!! <3
GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
Top printed please!
All-printed GMK? for $100? No, too close to the price of doubleshots. Would not buy.GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
Top printed please!
Really? and for around that price point?
Also interested in what you guys consider to be a complete set?
GMK Keycaps!! <3
Having asked that, would you be interested in front side laser printed keycaps for around $100 per complete set in any of their available colors?
Top printed please!
Really? and for around that price point?
Some of us have quotes from GMK for sets and know what they really cost and I do realize you guys have to make profit and all to justify the investment.
You could sell doubleshot 104 key ANSI sets all day for $100 and make bank. I've considered doing this myself since I have some extra money but don't want to take on the risk.
The costs only really start going up when you add keys on like most sets here do which is why I asked this question.Also interested in what you guys consider to be a complete set?
DolchHa, you beat me to it. I was going to suggest this too for people who missed out on Ivan's group buy. I'm sure it would garner a lot of interest since it's such an attractive set and compliments most keyboards very well. It would be great to have such a reliable vendor such as yourself carrying this, instead of gambling your money away and ordering from Originative.
:P
I absolutely love your ErgoDox cases since they're the only acrylic ones I've seen that allow for Cherry stabilizers on the thumb keys. Is there any plan to do another run of them?
Curious if there's any chance of procuring the Varmilo FC660M
Just curious, is there any, any, any chance you could actually restock the KBC Poker II (Cherry MX Blue) one more time before the Pok3r? I really want to get my hands on the POKER 2 with mx blues. ThanksWe had a PO for them, but Vortex advised that all SKUs would be changed to Poker 3s. Our rep said that if we still wanted Poker 2s, we'd have to place a special order for them and they'd start that production after the Poker 3s are caught up.
It was a question based on the recent numbers I had for laser printing which is only 11 euros cheaper to do per set than Double Shots.
If we were to start carrying GMK doubleshots as a regular thing, how many would actually buy them day in and day out? What would you think would be a good neutral color scheme that would sell well and still not step on any GB toes...?
Curious if there's any chance of procuring the Varmilo FC660M
Not out of the question, we are seeking to source these atm...
Curious if there's any chance of procuring the Varmilo FC660M
Not out of the question, we are seeking to source these atm...
I would be very interested in the Varmilo VA87M if you're going to bring in Varmilo products ;D
Interested means I will buy it immediately.
I've been looking everywhere for a Varmilo VB660M, if you could get me this keyboard with MX Browns that would be great!
Varmillo also has these mint green keycaps on their VA87M board. I would appreciate it if you could get me these keycaps, too.
Picture: http://i.imgur.com/UaPgCVn.jpg
We will see what we can do, no promises...
+1 for Tex aluminum case. Always looking for nice aluminum cases and it would be sweet to see more higher-quality keyboard cases made of metal. I am glad to hear that you guys decided to continue selling them. On your website it's hard to tell if an item is no longer going to be in stock or it is, just waiting for ETA.Okay thanks. Are the TEX or Vortex ones in production?
TEX will likely be the only ones we will stock going forward. Quality is key.
Im sure I read it somewhere but I cant recall what the verdict was; do you need any sort of plate spacers to be able to use a custom plate with those Tex cases? I'm really debating picking one up for either my Filco or Phantom but both have stainless plates which lack the curled lip on the top and bottom found on the OEM Filco plate.
Are you guys going to get any of the colored KUL keyboard cases in when they get released?You mean the colored tops? They have those already.
Are you guys going to get any of the colored KUL keyboard cases in when they get released?You mean the colored tops? They have those already.
Are you going to carry Tai Hao PBT doubleshots, and is there an ETA?Yes. Just placed order Friday. Should be a few weeks.Do you happen to know if they are planning on making a silver one?I sure hope so.Any noticeable differences between the linked caps and these new ones that you'll be getting in?The ones you linked were for the Shine 2. The new keycaps will be the same color, just for a Shine 3 and Shine 4.
Are you going to carry Tai Hao PBT doubleshots, and is there an ETA?Yes. Just placed order Friday. Should be a few weeks.Do you happen to know if they are planning on making a silver one?I sure hope so.Any noticeable differences between the linked caps and these new ones that you'll be getting in?The ones you linked were for the Shine 2. The new keycaps will be the same color, just for a Shine 3 and Shine 4.
Can you tell me which of these Shine caps would be most compatible for a Ducky Legend?
Are you going to carry Tai Hao PBT doubleshots, and is there an ETA?Yes. Just placed order Friday. Should be a few weeks.Do you happen to know if they are planning on making a silver one?I sure hope so.Any noticeable differences between the linked caps and these new ones that you'll be getting in?The ones you linked were for the Shine 2. The new keycaps will be the same color, just for a Shine 3 and Shine 4.
Can you tell me which of these Shine caps would be most compatible for a Ducky Legend?
All of them are 'compatible,' however they will not feature the same function-printing as the keys serve to do different things (i.e. Fn + Frow keys have functions in the Shine 3 and Shine 4 that will not be the same as the Legend)
Please compare the two photos below to see the legend changes in key functions between the Ducky Legend and Shine 3:
Ducky legend:Show Image(https://mechanicalkeyboards.com/shop/images/products/large_957_large_956_Legend_black_04.jpg)
Shine 3:Show Image(http://mechanicalkeyboards.com/shop/images/products/large_667_large_514_Shine3White_main.jpg)
Most prominent are the 4 multimedia keys above the Number Pad.
Any updates regarding Leopold products?
I'm interested in getting a black FC660C with gold text.
When did you guys start selling springs?
Can you stock some ALPS switch keyboards, specifically the blue ones? Also some phantom mounting plates would be great. :thumb:
What about Cherry plate mount & PCB mount stabilizers?Cherry Germany's machine is broken or something, and seem to have no intention of fixing atm.
I know this has been suggested before, but I haven't seen anything about it in while.
Shiiii. I am in need of clears for ergo clears to use on my other octagon.So get tactile grays since your swapping springs anyway.
Do you have an expected date or MSRP for Pok3r?
with EK dropping leopold keyboards, i think it would be awesome if you dudes stocked some. Not sure the j
[/quoteé]
This. I know I would be interested in one! With EK dropping Leopold it is starting to cause even more inflation in An already inflated market (EBay). Anywho I would be super excited to see you stocking these !
Any plans to get new Keycool 84 stock?
Cherry switches and single-colour backlight please. The kailh & rainbow colour ones are bleh
with EK dropping leopold keyboards, i think it would be awesome if you dudes stocked some. Not sure the legalities with the fc660c topre but i remember you guys selling the type heaven...
Please get fc660c! Don't know why ek stopped carrying Leopold my fav brand. :*(
with EK dropping leopold keyboards, i think it would be awesome if you dudes stocked some. Not sure the j
[/quote�]
This. I know I would be interested in one! With EK dropping Leopold it is starting to cause even more inflation in An already inflated market (EBay). Anywho I would be super excited to see you stocking these !
We are doing what we can to make this happen, but no promises...continue to check our website (https://mechanicalkeyboards.com/incoming.php) for updates should there be any in the future.
Cherry 62g Ergo-Clears :D
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.
On request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
Put me down for some Pink Cherry's.Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
I have never tried ergo clears the 62g spring sounds the best for me! Traditionally what switch does a 62gram spring come from!Put me down for some Pink Cherry's.Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
And all they have to do is market it as a gamer switch.Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.
I have never tried ergo clears the 62g spring sounds the best for me! Traditionally what switch does a 62gram spring come from!Put me down for some Pink Cherry's.Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
A black-on-white Cherry-mount F11 key for my Monterey K101?You do realize this is a vendor subforum right?
Here's the thread (https://geekhack.org/index.php?topic=69285.msg1658903#msg1658903) I started about the KB; there are photos of another key (F10) shown as an example.
If no one has one, could you suggest where I may be able to find one online?
Thanks guys!
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
I hold out hope that either cherry or a manufacturer will take the plunge. It would be a great move Imo
A black-on-white Cherry-mount F11 key for my Monterey K101?Not much for us to comment on regarding the suggestions mentioned. We are not the manufacturer (Cherry) and unfortunately we have little say so in what Cherry Corp does with their switches. If Cherry makes it, we do our best to carry it when available.
Here's the thread (https://geekhack.org/index.php?topic=69285.msg1658903#msg1658903) I started about the KB; there are photos of another key (F10) shown as an example.
If no one has one, could you suggest where I may be able to find one online?
Thanks guys!
:-XA black-on-white Cherry-mount F11 key for my Monterey K101?You do realize this is a vendor subforum right?
Here's the thread (https://geekhack.org/index.php?topic=69285.msg1658903#msg1658903) I started about the KB; there are photos of another key (F10) shown as an example.
If no one has one, could you suggest where I may be able to find one online?
Thanks guys!
60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
I hold out hope that either cherry or a manufacturer will take the plunge. It would be a great move Imo
Not much for us to comment on regarding the suggestions mentioned. We are not the manufacturer (Cherry) and unfortunately we have little say so in what Cherry Corp does with their switches. If Cherry makes it, we do our best to carry it when available.
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
I hold out hope that either cherry or a manufacturer will take the plunge. It would be a great move Imo
Not much for us to comment on regarding the suggestions mentioned. We are not the manufacturer (Cherry) and unfortunately we have little say so in what Cherry Corp does with their switches. If Cherry makes it, we do our best to carry it when available.
You saw the thing about cherry making them on request. That's a complete no chancer?
Quote from the DT wiki:Cherry 62g Ergo-Clears :D
If Cherry had any brains this would be the next logical step to fight off Kailh/Gaterons.QuoteOn request, Cherry has stated that they will actually produce Ergo Clears in a slider-colour of choice, with a minimum order of at least 750,000 switches. Keyboard enthusiasts have yet to agree if such switches should be called Beiges, Pinks or Violets.
I hold out hope that either cherry or a manufacturer will take the plunge. It would be a great move Imo
Not much for us to comment on regarding the suggestions mentioned. We are not the manufacturer (Cherry) and unfortunately we have little say so in what Cherry Corp does with their switches. If Cherry makes it, we do our best to carry it when available.
You saw the thing about cherry making them on request. That's a complete no chancer?
Even assuming MK.com has the capital to invest in 750,000 custom switches, I doubt they'd be willing to take that risk. You want them to pour maybe half a million dollars into a switch order for a sub-niche product? That's ballsy.
Cherry's offer is intended for manufacturers who would most likely use their switches in full keyboards for retail sale. Since they'd be buying switches for their product anyway, they have an option for further customization at the right volume.
Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
You do realize this is a vendor subforum right?
Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
Don't we wish :p
We hope to restock them soon...no ETA as of yet...
Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
Don't we wish :p
We hope to restock them soon...no ETA as of yet...
Will you be getting any new colors, or will they all be the same as last time.
Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
Don't we wish :p
We hope to restock them soon...no ETA as of yet...
Will you be getting any new colors, or will they all be the same as last time.
What would be your color preference?
Was hoping you would get some in silver or light grey, but if not I will probably get the dark grey.
I'm speaking of the TKL cases by the way.
Was hoping you would get some in silver or light grey, but if not I will probably get the dark grey.
I'm speaking of the TKL cases by the way.
Of course...and of course...
Silver TKL looks like it's currently in stock and on sale.Does this go for the TKL cases too? ;)60% Alu Tex case in purple. (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=628)
Even though they are out of stock, we have all the other colors available while supplies last.
Don't we wish :p
We hope to restock them soon...no ETA as of yet...
Will you be getting any new colors, or will they all be the same as last time.
What would be your color preference?
Was hoping you would get some in silver or light grey, but if not I will probably get the dark grey.
I'm speaking of the TKL cases by the way.
Silver TKL looks like it's currently in stock and on sale.
Are all the Leopold boards you are sourcing from China or South Korea?
Why are you importing more Tex? I got the impression those didn't sell very well?
Was hoping you would get some in silver or light grey, but if not I will probably get the dark grey.
I'm speaking of the TKL cases by the way.
Of course...and of course...
Guys, Ducky has these new Citi Themed spacebars that they're going to sell soon (I'm sure you've seen them). I'd like the pack with the NYC skyline. I know that you're an authorized retailer of their products, will you be stocking these and if so, can I place a preorder for a set?Show Image(http://i.imgur.com/mM5xYHP.png)
Thanks
Guys, Ducky has these new Citi Themed spacebars that they're going to sell soon (I'm sure you've seen them). I'd like the pack with the NYC skyline. I know that you're an authorized retailer of their products, will you be stocking these and if so, can I place a preorder for a set?Show Image(http://i.imgur.com/mM5xYHP.png)
Thanks
Guys, Ducky has these new Citi Themed spacebars that they're going to sell soon (I'm sure you've seen them). I'd like the pack with the NYC skyline. I know that you're an authorized retailer of their products, will you be stocking these and if so, can I place a preorder for a set?MoreShow Image(http://i.imgur.com/mM5xYHP.png)
Thanks
Guys, Ducky has these new Citi Themed spacebars that they're going to sell soon (I'm sure you've seen them). I'd like the pack with the NYC skyline. I know that you're an authorized retailer of their products, will you be stocking these and if so, can I place a preorder for a set?MoreShow Image(http://i.imgur.com/mM5xYHP.png)
Thanks
Looking for rainbow keycaps (PBT) for my tkl CM rapid-i. Would prefer side lettering not top. Could you find me one!?Mass drop just had some keycool gradient and rainbow caps with side print option I'm not sure if the drop is still active or not but its worth a shot.
Thanks, Danny
Looking for rainbow keycaps (PBT) for my tkl CM rapid-i. Would prefer side lettering not top. Could you find me one!?
Thanks, Danny
Leopold FC660M with greens?
Leopold FC660M with greens?
At some point, we hope to fill out our Leopold catalog. We are working to expand in this area. Stay tuned.
Guys, Ducky has these new City Themed spacebars that they're going to sell soon (I'm sure you've seen them). I'd like the pack with the NYC skyline. I know that you're an authorized retailer of their products, will you be stocking these and if so, can I place a preorder for a set?Show Image(http://i.imgur.com/mM5xYHP.png)
Thanks
Any idea when you'll have more MX clear switches in stock?If you don't mind paying for extra shipping, you can ask sprit. He has Clears for $.50. I recently got a couple from him.
Any idea when you'll have more MX clear switches in stock?
Any news on the TEX TKL cases? :D
Any news on the TEX TKL cases? :DBoth are on order. TEX should be within a month or two. Cherry is within 12 months.
Any news on the TEX TKL cases? :DBoth are on order. TEX should be within a month or two. Cherry is within 12 months.
Will you be allowing pre-orders for the TEX TKL cases?
I know I've said this a few times, but I'm hoping that you get some light grey, or silver versions this time.
Any ETA on clear switches?
Thanks!
Any chance you guys are looking at the Royal Kludge brand? Here is a link. (http://www.rkgaming.com/)
In particular I'm interested in the standard RK930-87 w/ Electro-Cap switches and POM keycaps in 45g and 55g.
They also carry this version in backlit RGB, and in 104 size formats.
Business arguments for:
- The EC switches shouldn't have any chattering issues associated with something like Cherry.
- The switches are compatible with Cherry MX keycaps.
- The EC switches themselves are sourced from Noppoo and have been in production for two years now so all the early bugs should be worked out.
- No Mini/Micro USB port issues because the cable is hardwired.
- Unlike Topre, these use Costar/Wire stabilizers so if the stabilizers squeak it should be easily remedied by the end-user with lube.
- Closest competitor is the Coolermaster Novatouch which lacks 55g option, LED's, numberpad, and programmable RGB backlighting.
- Even the standard 930-87 version has higher quality thick POM vs. the NovaTouch's thin ABS.
- Price is around 50% of the NovaTouch so you can stock twice as many! ;D
- Topre no longer sells full size 104 keyboards with 55g weighting, but RK does!
MK.com,
In regards to the following item:
Cherry MX Keycap Set - Shine 3 White ABS (Ducky)
SKU: S9C4-L108-USALW
Will these have the same shine-through effect as the stock keycaps, as in will the legends be lit up by the LED?
Thanks for the reply
Can you stock CMY modifiers or is that just a group buy thing?
Re: TKL Tex cases... what colors are you guys getting in?
Hey there, I couldn't help but notice that you recently got a couple Leopold FC660M models in stock:
http://mechanicalkeyboards.com/shop/index.php?l=search_list&s[search]=leopold&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=0
Does this mean you are starting to distribute Leopold keyboards in general? Any chance of you getting the FC750R (in navy or black w/ MX blues) anytime soon? (And I'm sure a lot of people would be interested in the FC660C as well.)
We are doing all that we can to carry as many Leopolds as possible, but we are not yet able to stock the one you are requesting. Please continue to check our website for updates going forward. :thumb:
Do you have an estimate on when the long-tail SIP sockets will become available for sale on your site? Thanks.
How about some minimum estimate? :) Just want to know if I should order elsewhere in the meantime, if it's going to take 2+ weeks for your sorting.
Stronger Cherry MX springs would be a nice addition to the store. I think the current offerings go up to 80g, but I'd personally stock up on anything from 100g to 150g.
How about some minimum estimate? :) Just want to know if I should order elsewhere in the meantime, if it's going to take 2+ weeks for your sorting.
One weekish
Clicky Matias switches (110 pack) plz. Been out of stock together.
Clicky Matias switches (110 pack) plz. Been out of stock together.
While I wouldn't say that we are flush with an over abundance, we did manage to scrape together a few packs for you:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=478
We appreciate the request, and look to be fully stocked on all Matias switches soon.
Clicky Matias switches (110 pack) plz. Been out of stock together.
While I wouldn't say that we are flush with an over abundance, we did manage to scrape together a few packs for you:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=478
We appreciate the request, and look to be fully stocked on all Matias switches soon.
Looking back at my post it may have been a bit confusing. While I am curious about quiet click switches, I am actually interested in a 110 pack of clicky switches. I apologize if I was confusing in any way.
Clicky Matias switches (110 pack) plz. Been out of stock together.
While I wouldn't say that we are flush with an over abundance, we did manage to scrape together a few packs for you:
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=478
We appreciate the request, and look to be fully stocked on all Matias switches soon.
Looking back at my post it may have been a bit confusing. While I am curious about quiet click switches, I am actually interested in a 110 pack of clicky switches. I apologize if I was confusing in any way.
Confusion was all on me, regardless what I said still stands:
Click here for Clicky switches ----->http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=481
Quickfire Rapid I with MX reds.
Quickfire Rapid I with MX reds.
Please link an example...and we will see.
Quickfire Rapid I with MX reds.
Please link an example...and we will see.
http://gaming.coolermaster.com/en/products/keyboards/rapid-i/
CM Novatouch, please!
Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.
Any idea if you will ever restock the blue and white bi color double shot pbt caps from Vortex? I saw you had stock of the pink and white which made me curious about the blue and white.
ETA on Cyan LEDs? :)
ETA on Cyan LEDs? :)
Working to get them all bagged up now...we hope to have them on the site soon.
Any idea if you will ever restock the blue and white bi color double shot pbt caps from Vortex? I saw you had stock of the pink and white which made me curious about the blue and white.
We are doing all we can to get some more of these...even if we choose to find another source for them. Please be patient with us.
Ducky branded keychains if possible. I'm sure these are hard to obtain in quantities.
Any word on more of the TEX Filco TKL compatible cases? I'd like a second one in black.This is something we inquire about constantly. We have an active PO in for them. Hope to restock soon.
Will you ever have the compact acrylic all-clear Ergodox case?Show Image(http://trauring.org/wp-content/uploads/2015/03/infinity-ergodox.jpg)
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgISO items have not done well in times past, so there are no active plans for them.
More artisan caps would be cool as well. :cool:
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgISO items have not done well in times past, so there are no active plans for them.
More artisan caps would be cool as well. :cool:
As for the artisan keycaps, we have a few up for preorder now...
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgISO items have not done well in times past, so there are no active plans for them.
More artisan caps would be cool as well. :cool:
As for the artisan keycaps, we have a few up for preorder now...
Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgISO items have not done well in times past, so there are no active plans for them.
More artisan caps would be cool as well. :cool:
As for the artisan keycaps, we have a few up for preorder now...
Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.
Find them here in our newly redesigned Incoming Keyboards and Accessories page:
https://mechanicalkeyboards.com/incoming.php
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpgISO items have not done well in times past, so there are no active plans for them.
More artisan caps would be cool as well. :cool:
As for the artisan keycaps, we have a few up for preorder now...
Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.
Find them here in our newly redesigned Incoming Keyboards and Accessories page:
https://mechanicalkeyboards.com/incoming.php
Sorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.
Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order?
Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.
Will you guys carry the new ducky mouse?
Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.
We are looking forward to selling out of all other colors. Soon as that happens, you can believe we will restock Purple cases. :thumb:
So you want ALPs plate in there? I can do that.MoreSadly no :(I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysI can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Living CAD threadErgodox cases that are not $100+, please!then get one custom cut. the files are publicly available
E.g. at?
But it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.
https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.MoreSadly no :(I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysI can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Living CAD threadErgodox cases that are not $100+, please!then get one custom cut. the files are publicly available
E.g. at?
But it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.
https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.MoreSadly no :(I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysI can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Living CAD threadErgodox cases that are not $100+, please!then get one custom cut. the files are publicly available
E.g. at?
But it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.
https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.MoreSadly no :(I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sidewaysI can put them all into one file and try and help out with price. If you make a new account they let you use the material for free, or the shop time for free, I forget. Let me know and I will do it.Living CAD threadErgodox cases that are not $100+, please!then get one custom cut. the files are publicly available
E.g. at?
But it would cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.
https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
Yes, please! I am forever indebted!
Just noticed that you guys got some FC660C's in stock :thumb:
Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?
Also, are the FC660M's you guys have in stock made in Korea, or China?
Removed most of the conversation between seth and bcred just as a cleanup. If I accidentally removed something else, my bad! I'm rusty.omg, who's this guy?!?!
Removed most of the conversation between seth and bcred just as a cleanup. If I accidentally removed something else, my bad! I'm rusty.Yeah, sorry about that, I put more tags when I realized how long it was getting, but we aren't able to remove stuff. Thanks!
Just noticed that you guys got some FC660C's in stock :thumb:
Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?
Also, are the FC660M's you guys have in stock made in Korea, or China?
We certainly have plans to carry just as much Leopold as we can, and then some... :)
We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.
Any chance for Leopold FC660M with clears anytime soon?No ETA.
KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?Yesterday. Very limited quantities though. Larger shipment coming in August or September.
Removed most of the conversation between seth and bcred just as a cleanup. If I accidentally removed something else, my bad! I'm rusty.omg, who's this guy?!?!
Any chance for Leopold FC660M with clears anytime soon?
KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?Yesterday. Very limited quantities though. Larger shipment coming in August or September.
We're ordering as much as possible whenever possible. Waiting to hear back from Leopold regarding additional models.Any chance for Leopold FC660M with clears anytime soon?
+1
We have thousands of Fukka switches.If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy? Maybe not on this initial shipment as it's probably already in transit but maybe on the next?KBParadise Facebook says you are going to be receiving some V80MTS this month. When will the preorder pages go live?Yesterday. Very limited quantities though. Larger shipment coming in August or September.
We have thousands of Fukka switches.
Fukka = Taihao = Fuhua = FellyDu = ????
The only official name (at this moment, that I'm aware of) is TaiHao.
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.
If they're there, and I just don't see it then I apologize.
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.
If they're there, and I just don't see it then I apologize.
https://mechanicalkeyboards.com/incoming.php
https://mechanicalkeyboards.com/arrived.php
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website. I used them all the time.
If they're there, and I just don't see it then I apologize.
https://mechanicalkeyboards.com/incoming.php
https://mechanicalkeyboards.com/arrived.php
Ah, I see what my issue was. I had https://mechanicalkeyboards.com/shop/ (https://mechanicalkeyboards.com/shop/) bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.
When do you guys expect some more Black or Smoke KUL clears?
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!
As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.
Any chance of restocking brown switches soon?
Any chance of restocking brown switches soon?
December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?
Any chance of restocking brown switches soon?
December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?Show Image(http://i.giphy.com/pMOOfcirTNAic.gif)
Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?Ducky has since released the Shine 4. The Shine 5 should be out later this year. It's hard to imagine Ducky reproducing an older model.
Do you think you guys will ever stock some non low profile aluminum 60% cases?
Do you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Do you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Basically cases were you can't see the switch housing.
Do you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Basically cases were you can't see the switch housing.
Do you know of any aluminum cases with this higher profile?
Do you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Basically cases were you can't see the switch housing.
Do you know of any aluminum cases with this higher profile?
TEX 60% vs MKC 60% (https://flic.kr/p/hwqpSQ) by Compact Keyboards (https://www.flickr.com/photos/compactkey/), on FlickrShow ImageDo you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Basically cases were you can't see the switch housing.
Do you know of any aluminum cases with this higher profile?
This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case. See how the MKC case hides the switch housings?
(https://farm8.staticflickr.com/7323/10845966176_b782901fec_k.jpg) (https://flic.kr/p/hwqpSQ)
More non low profile case examples. These particular cases were from group buys.
(https://farm6.staticflickr.com/5512/9862684673_350f325255_k.jpg) (https://flic.kr/p/g2wQxt)Hammer & Duck Poker Pitch Comparision (https://flic.kr/p/g2wQxt) by Compact Keyboards (https://www.flickr.com/photos/compactkey/), on Flickr
This is one that was sold on Massdrop.Show Image(https://massdrop.imgix.net/resizer/product-images/MD-4906_20141218121718_4373b7d40a9bc656.jpg?fm=jpg&q=70)
Man, those are some nice looking cases right there!
TEX 60% vs MKC 60% (https://flic.kr/p/hwqpSQ) by Compact Keyboards (https://www.flickr.com/photos/compactkey/), on FlickrShow ImageDo you think you guys will ever stock some non low profile aluminum 60% cases?
As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Basically cases were you can't see the switch housing.
Do you know of any aluminum cases with this higher profile?
This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case. See how the MKC case hides the switch housings?
(https://farm8.staticflickr.com/7323/10845966176_b782901fec_k.jpg) (https://flic.kr/p/hwqpSQ)
More non low profile case examples. These particular cases were from group buys.
(https://farm6.staticflickr.com/5512/9862684673_350f325255_k.jpg) (https://flic.kr/p/g2wQxt)Hammer & Duck Poker Pitch Comparision (https://flic.kr/p/g2wQxt) by Compact Keyboards (https://www.flickr.com/photos/compactkey/), on Flickr
This is one that was sold on Massdrop.Show Image(https://massdrop.imgix.net/resizer/product-images/MD-4906_20141218121718_4373b7d40a9bc656.jpg?fm=jpg&q=70)
Thanks for the pics, we will see what we can do to acquire something similar, or perhaps the very thing...
Do you guys know when (or if) there will be more Matias Quiet Click V60 Mini keyboards in stock?
Matias/Alps springs. Please!
Matias/Alps springs. Please!
we will look into it...
Two things:
1. Any chance on stocking Rainbow or Milky/White Transparent Jelly POM's? Chinese market just got restocked and these are available through Gateron I believe. This would probably be fairly popular with the backlit crowd.
2. On the incoming KBT Next keyboards ... Are these using rebranded Gaterons? I can't tell from the translations as some say it's Gateron and others say these these are a brand new switch. If that's the case then what do folks do when replacements are needed? Also will I heard rumors of a tenkeyless version .. true/false?
Two things:
1. Any chance on stocking Rainbow or Milky/White Transparent Jelly POM's? Chinese market just got restocked and these are available through Gateron I believe. This would probably be fairly popular with the backlit crowd.
2. On the incoming KBT Next keyboards ... Are these using rebranded Gaterons? I can't tell from the translations as some say it's Gateron and others say these these are a brand new switch. If that's the case then what do folks do when replacements are needed? Also will I heard rumors of a tenkeyless version .. true/false?
1. We are on this...stay tuned.
2. KBTalking switches are another brand that is not Gateron. Not sure if its to be a trade secret or not. What I can tell you is that they are an absolute joy to type on and I am a die hard fanboy of this other switch manufacturer.
Two things:
1. Any chance on stocking Rainbow or Milky/White Transparent Jelly POM's? Chinese market just got restocked and these are available through Gateron I believe. This would probably be fairly popular with the backlit crowd.
2. On the incoming KBT Next keyboards ... Are these using rebranded Gaterons? I can't tell from the translations as some say it's Gateron and others say these these are a brand new switch. If that's the case then what do folks do when replacements are needed? Also will I heard rumors of a tenkeyless version .. true/false?
1. We are on this...stay tuned.
2. KBTalking switches are another brand that is not Gateron. Not sure if its to be a trade secret or not. What I can tell you is that they are an absolute joy to type on and I am a die hard fanboy of this other switch manufacturer.
Ok but what about replacement switches / tkl?
Random as hell, I want one of the Varmillo Keyboards spacebears that says "don't cry for me Argentina" in black
Random as hell, I want one of the Varmillo Keyboards spacebears that says "don't cry for me Argentina" in black
I have never seen a spacebear before...do they growl?
As for space bars, we are doing what we can to gain Varmilo as a brand...so...
Random as hell, I want one of the Varmillo Keyboards spacebears that says "don't cry for me Argentina" in black
I have never seen a spacebear before...do they growl?
As for space bars, we are doing what we can to gain Varmilo as a brand...so...
Random as hell, I want one of the Varmillo Keyboards spacebears that says "don't cry for me Argentina" in black
I have never seen a spacebear before...do they growl?
As for space bars, we are doing what we can to gain Varmilo as a brand...so...
I found a SpaceBearShow Image(http://i.imgur.com/NjnqDq3.jpg)
My phone corrected it to Spacebear.
Random as hell, I want one of the Varmillo Keyboards spacebears that says "don't cry for me Argentina" in black
I have never seen a spacebear before...do they growl?
As for space bars, we are doing what we can to gain Varmilo as a brand...so...
I found a SpaceBearShow Image(http://i.imgur.com/NjnqDq3.jpg)
My phone corrected it to Spacebear.
Autocorrect? You must talk about SpaceBears A LOT!
Any chance of the FC660M in black with MX reds? I loathe anything white because of eventual yellow =\
Any chance of the FC660M in black with MX reds? I loathe anything white because of eventual yellow =\
Speaking of Leopold, that brand doesn't show up here: https://mechanicalkeyboards.com/search.php
Any chance of the FC660M in black with MX reds? I loathe anything white because of eventual yellow =\
Speaking of Leopold, that brand doesn't show up here: https://mechanicalkeyboards.com/search.php
Any chance of the FC660M in black with MX reds? I loathe anything white because of eventual yellow =\
Any chance of the FC660M in black with MX reds? I loathe anything white because of eventual yellow =\
Our goal is to carry as many Leopold keyboards as we can...so yes, we do plan to carry other colors beyond white.
Our goal is to carry as many Leopold keyboards as we can...so yes, we do plan to carry other colors beyond white.
Is there a way to preorder specific models from you in Leopold's catalog? I already have the gray 660c I would like to get a white/gray 660c in the future.
There isn't any chance of you guys stocking PCB mount gaterons in larger quantities for a lower price per switch, is there?
Yaaayyyy, that'd be amazing! :thumb:There isn't any chance of you guys stocking PCB mount gaterons in larger quantities for a lower price per switch, is there?
We are working on this...
Any chance you guys are going to stock the KBP v60's with gateron switches?
Any chance you guys are going to stock the KBP v60's with gateron switches?
Not sure if KBParadise wants to go with Gaterons...they seem to be cornering the market on 60% Matias Alps at the moment...
I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
It's true, Greetechs are currently my go-to for blues at the very least. They do their tactility well.I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
Try Greetechs, they are awesome!
I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
Try Greetechs, they are awesome!
I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
Try Greetechs, they are awesome!
Mmm... :-[ :-X
Last Night placed an order for your KBParadise TKL V80 Dolch Mechanical Keyboard (Matias Quiet Click)
SKU: KBP-V80MTS-Q-DOL
Stock: Pre-Order Only
Available for Pre-Order! Estimated Arrival: 11/05/15* (http://mechanicalkeyboards.com/customer_service.php#66)
Even though it won't show up till the beginning of November 2015, still looking forward to seeing it when it arrives on my front door.
Nice to see the Vendor here giving us valuable info on what's happening with his company and incoming stock, we need more retailers like yourself here on Geekhack :thumb: .
I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
Try Greetechs, they are awesome!
Mmm... :-[ :-X
To answer your original request, we hope to restock Cherry Brown MX switches soon.
I really wish you guys had MX Browns in stock. I'm about to place another order for switches... :'(
Try Greetechs, they are awesome!
Mmm... :-[ :-X
To answer your original request, we hope to restock Cherry Brown MX switches soon.
I need these like, now... so I'm going to pull the trigger on some Greetechs. If they suck I blame you!!!
Seen that you guys got some FC750Rs about to come in. Do you think that you will start stocking the white versions also?
Oh, and what about the white FC660C?
Okay cool. Please try to get the FC750RTs that accept standard spacebars. I think I read the Korean made ones do.Seen that you guys got some FC750Rs about to come in. Do you think that you will start stocking the white versions also?
Oh, and what about the white FC660C?
Our relationship with Leopold is still relatively new. We hope to be able to carry more capacitive type keyboards soon. And the white mx TKL is inevitable.
These don't hold interest particularly to me, but I'm sure it would be a massive hit if you guys sold single or three-pack 6.5u spacebars in like a couple different basic colors.
Will you guys be restocking KUL's? I noticed their logo disappeared off your site a while back.
Will you guys be restocking KUL's? I noticed their logo disappeared off your site a while back.
No, we will no longer be stocking Keyed Up Lab keyboards. Once we sell our remaining inventory, adios to them.
Will you guys be restocking KUL's? I noticed their logo disappeared off your site a while back.
No, we will no longer be stocking Keyed Up Lab keyboards. Once we sell our remaining inventory, adios to them.
:( :( :( :( :( :(
No, we will no longer be stocking Keyed Up Lab keyboards. Once we sell our remaining inventory, adios to them.
Some insight would be great since im waiting fro a long time on a KUL and the ETA has shifted to mid october. (a different shop, not MK.com)
Some insight would be great since im waiting fro a long time on a KUL and the ETA has shifted to mid october. (a different shop, not MK.com)
We cannot speak as to the availability or lack thereof. We are simply no longer stocking their products.
Some insight would be great since im waiting fro a long time on a KUL and the ETA has shifted to mid october. (a different shop, not MK.com)
We cannot speak as to the availability or lack thereof. We are simply no longer stocking their products.
And I assume you cant' state why that is?
Thanks for your answer. Guess its time to cancel the order and start the search for a keyboard all over again.Some insight would be great since im waiting fro a long time on a KUL and the ETA has shifted to mid october. (a different shop, not MK.com)
We cannot speak as to the availability or lack thereof. We are simply no longer stocking their products.
I just noticed you listing some Royal Kludge 60% boards with Green Kailh switches? Are these the rebranded Razer switches or does Kailh have their own clone of MX Greens now?Kailh Green is Kailh Green. To our knowledge there is only one kind of Green Kailh switch, so...they would have to be one thing, Green. and Kailh.
I just noticed you listing some Royal Kludge 60% boards with Green Kailh switches? Are these the rebranded Razer switches or does Kailh have their own clone of MX Greens now?Kailh Green is Kailh Green. To our knowledge there is only one kind of Green Kailh switch, so...they would have to be one thing, Green. and Kailh.
I just noticed you listing some Royal Kludge 60% boards with Green Kailh switches? Are these the rebranded Razer switches or does Kailh have their own clone of MX Greens now?Kailh Green is Kailh Green. To our knowledge there is only one kind of Green Kailh switch, so...they would have to be one thing, Green. and Kailh.
Is this another NDA thing? Kailh only sells blue/red/black/browns ... they also sell rebranded Kailh Browns/Blues as Razer Oranges/Greens.
If these are in fact the same as Razers - someones legal department may be getting a phone call soon.
I just noticed you listing some Royal Kludge 60% boards with Green Kailh switches? Are these the rebranded Razer switches or does Kailh have their own clone of MX Greens now?Kailh Green is Kailh Green. To our knowledge there is only one kind of Green Kailh switch, so...they would have to be one thing, Green. and Kailh.
Is this another NDA thing? Kailh only sells blue/red/black/browns ... they also sell rebranded Kailh Browns/Blues as Razer Oranges/Greens.
If these are in fact the same as Razers - someones legal department may be getting a phone call soon.
This is a 'we are not sure' thing. The phone call would have to go to Royal Kludge, then.
Have you considered offering the Royal Kludge RC930 through your store? They float around $120 direct from China. I might pick up another if the price was right. If you don't, no worries.
I'd also like to see more Cherry profile PBT caps (Cherry MX mount). If you had a double shot version of such caps I would buy them immediately.
But I'd love to see more royal kludge capacitive boards be easily available, I've enjoyed mine so far.
I'd also like to see more Cherry profile PBT caps (Cherry MX mount). If you had a double shot version of such caps I would buy them immediately.
I'd also like to see more Cherry profile PBT caps (Cherry MX mount). If you had a double shot version of such caps I would buy them immediately.
+1 Something like the Gateron dye-subs would be really nice to have easy access to.
Any news on the Filco TKL aluminum cases?
Has there been any consideration for cherry stabilizers, especially spacebar-sized (6.25, 7u)? They're way more difficult to obtain in the US without importing than they should be, it seems criminal.
I noticed that you only seem to have the full palm ergodox cases in stock.
Any idea if/when you'll have the standard cases back in stock?
If you could get clacks and sell them on your website, that would be great.
question about the KBtalking 108 Next boards you just received ...
Your dimension specs say it is .75" deep ... Therefore this has to be for sure the thinnest mechanical keyboard you've ever sold?
Royal Kludge electrostatic switches :D
If you could get clacks and sell them on your website, that would be great.
Are Clacks not available through other means?
question about the KBtalking 108 Next boards you just received ...
Your dimension specs say it is .75" deep ... Therefore this has to be for sure the thinnest mechanical keyboard you've ever sold?
Its pretty thin. I will double check the dimenions. I imagine it is not counting the keycaps and switches
Royal Kludge electrostatic switches :D
Working on it...
If you could get clacks and sell them on your website, that would be great.
Are Clacks not available through other means?
DO NOT WASTE YOUR TIME IN GETTING THESE because your web-store will turn into a rabid Clack-fest of extreme debauchery and unlimited degradation :o .
Stand firm against this type of immorality known, as being another "Clack Peddler".
Show Image(http://falbatech.pl/prestashop/img/p/1/5/2/152-thickbox_default.jpg)
Please. Make me the happiest nerd in the world.
Show Image(http://falbatech.pl/prestashop/img/p/1/5/2/152-thickbox_default.jpg)
Please. Make me the happiest nerd in the world.
This is possible, but we cannot give a time frame. Thanks for the concept/idea, we will look into it.
SA Vim keycap - green
Since you guys are trying to carry more Leopold now... Any chance you can get a hold of these?Show Image(http://i.imgur.com/PP2dwSt.jpg)Show Image(http://i.imgur.com/bq2D2w2.jpg)
Cherry MX Red
The part number appears to be FC 210TP / CW. I found it on GeekKeys but they aren't for sale (yet?) -- I can't add to cart. Would rather buy from you guys anyway. :D
Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
I can't help you there I'm a sucker for black.MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
Wonderful answer...just what I was looking for. If we were able to offer such, what color preference(s) would be best in your opinion?
I can't help you there I'm a sucker for black.MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
Wonderful answer...just what I was looking for. If we were able to offer such, what color preference(s) would be best in your opinion?
MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
Wonderful answer...just what I was looking for. If we were able to offer such, what color preference(s) would be best in your opinion?
Would like to see high quality blank black PBT keycap sets in OEM profile for Cherry mx and Alps mounts.
MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
Wonderful answer...just what I was looking for. If we were able to offer such, what color preference(s) would be best in your opinion?
Blue, purple, or black :)
I can't help you there I'm a sucker for black.MoreIs this a popular layout for people building keyboards?Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Why else would people be asking for it?? :p
Of course I have no idea how many you have to sell to consider it popular.
But seriously I appreciate greatly all you guys have done and how you've expanded your offerings but come on man you gotta know your market a little better.
In my mind if someone is going to the trouble to build a custom TKL (versus buying one of the many ANSI125 that are readily available) they are going to go for an ANSI150 layout if for nothing more than using compatible keysets and to be different.
And where's my prize for 1300th post in this thread? :-*
Wonderful answer...just what I was looking for. If we were able to offer such, what color preference(s) would be best in your opinion?
Ansi150Any chance of getting PCB Mount Stabilizer kits/individuals? It's be nice to have a source that doesn't charge $30+ for shipping :D
We are working to have this available soon. They would only be for the Cherry version stabilizers, however.
Nice. The DIY section of your store is becoming quite awesome. :thumb:
This is certainly our goal...
Do you guys plan on offering Phantom plates with 86 key layout (bottom row: 1.5, 1u, 1.5, 7u spacebar, 1.5, 1u, 1.5) with stepped Capslock?
Which is that? Is there a name for that layout?
Which is that? Is there a name for that layout?
"Winkeyless with 1x winkeys."
So with the MK.com 75% keyboards right around the corner, are there any plans to stock more 75%-compatible (i.e. includes 1.75u right shift) keysets?
Can you guys adjust your gateron switch pricing to $0.30/switch for orders over 40 switches?
I think you could be losing out on potential customers as not everyone wants 100 switches.
did they push back the pok3r backlit release date? :(
btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
I think the new page looks sexy.
As for ideas, do you guys have any plans for a 60% plate?
It would be very helpful if the out of stock items could be somehow distinguished without having to drill down to the specific item to find out.Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
It would be very helpful if the out of stock items could be somehow distinguished without having to drill down to the specific item to find out.Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
It would be very helpful if the out of stock items could be somehow distinguished without having to drill down to the specific item to find out.Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
I would love to see some GMK blank modifier keys, esp bottom row (1.25x). If you were strategic about the colors you bought (looking at recent GB's, for example), I think a lot of folks would buy them for Win/Fn key use or to replace the bottom row.
Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
I'm still a newbie to this - are all those animations accomplished with Javascript/JQuery? Or is it ancient chinese secret?
y'all got any lifes in stock?
Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
I'm still a newbie to this - are all those animations accomplished with Javascript/JQuery? Or is it ancient chinese secret?
I will get an answer for you tomorrow...whatever it is it's awesome.
Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
I'm still a newbie to this - are all those animations accomplished with Javascript/JQuery? Or is it ancient chinese secret?
I will get an answer for you tomorrow...whatever it is it's awesome.
whats ze answer?
Quote from: dante link=topic=3122!1.msg1923045#msg1923045 date=1446683128btw: I hate your new webpage.
I'm teaching myself HTML and your new site makes me feel like I'm 5 years behind. :(
Ouch...but it's so pretty...
I'm still a newbie to this - are all those animations accomplished with Javascript/JQuery? Or is it ancient chinese secret?
I will get an answer for you tomorrow...whatever it is it's awesome.
Specifically when you scroll up/down the the incoming/arrived list with the items coming from side to side.
y'all got any lifes in stock?
Metal feet for TEX 60 case, or compatible ones?
Metal feet for TEX 60 case, or compatible ones?
Oh yeah +1 (2 actually) on that
How about some key sets for us Matias Quiet Click users!
How about some key sets for us Matias Quiet Click users!
Are there any plans to stock Leopold FC750Rs with Brown switches?
Metal feet for TEX 60 case, or compatible ones?
Oh yeah +1 (2 actually) on that
Metal feet for TEX 60 case, or compatible ones?
Oh yeah +1 (2 actually) on that
Agreed, I would also love some. Does anyone know if the GON feet are compatible?
Metal feet for TEX 60 case, or compatible ones?
Any ETA on when the Tex aluminum Filco cases will come back in stock? Specifically these two. I'm trying to locate one for my latest Phantom build.
Filco/ ONI TKL Aluminum Case - Black (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=280)
Filco/ ONI TKL Aluminum Case - Grey (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=281)
I would love some GMK Hyperfuse keycaps for my new KUL ES-87 :D
Any ETA on when the Tex aluminum Filco cases will come back in stock? Specifically these two. I'm trying to locate one for my latest Phantom build.
Filco/ ONI TKL Aluminum Case - Black (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=280)
Filco/ ONI TKL Aluminum Case - Grey (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=281)
We hear that TEX is redesigning their case...so we wait
We are looking to source cases for Filco's in the meantime, but they would likely be ABS.
Any ETA on when the Tex aluminum Filco cases will come back in stock? Specifically these two. I'm trying to locate one for my latest Phantom build.
Filco/ ONI TKL Aluminum Case - Black (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=280)
Filco/ ONI TKL Aluminum Case - Grey (Tex) (https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=281)
We hear that TEX is redesigning their case...so we wait
We are looking to source cases for Filco's in the meantime, but they would likely be ABS.
Ooh, if you could get some off white/beige colored ones that would be awesome.