geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: AIRPOTTER on Mon, 08 April 2019, 20:42:15

Title: [GB] Think6.5° | 65% Custom Keyboard (completed)
Post by: AIRPOTTER on Mon, 08 April 2019, 20:42:15
Space65 Keyboard Guide: https://keyboard.guide/board/think6.5/


Think6.5 V1 Group Buy has been 100% completed. For Think6.5 V2 information, please move to page:
https://geekhack.org/index.php?topic=105950.0


----------------------------------------------------------------------------------------------
---------------------------------------THINK6.5°-------------------------------------------
----------------------------------------------------------------------------------------------
Hey my keeb friends, after receiving great feedback and testing the prototypes, it's time THINK6.5° is ready for the Group Buy. Think6.5° is a keyboard I co-designed with Geekhack user Oldcat. Oldcat and I will be working together during the GB process. I will be primarily be the ground man responsible for manufacturing, fulfillment, and partial invoicing. And Oldcat will be coordinating with me for manufacturing/fulfillment, communicating with GB participants, and possibly doing partial invoicing.

(https://i.imgur.com/xjBF4Ej.jpg)

Brandon Taylor's Review of Think6.5 V1


The name Think6.5° comes from René Descartes' philosophy that "I think, therefore I am." Combining the fact that the board has a 6.5° degree angle, we name it Think6.5°.[/size]

(https://i.imgur.com/nm7csKX.png)
(https://i.imgur.com/XYevM2m.jpg)
(https://i.imgur.com/oqITBhj.jpg)
(https://i.imgur.com/mmNYPBY.jpg)
(https://i.imgur.com/WWlZDRP.png)


Key Features
1. Premium-quality and affordable 65% keyboard in different materials and colors
2. 6.5 degree angle
3. Default option includes PVD Brass Badge and PVD Brass Weight which will be premium upgrades in many other group buys
4. 4.5mm, integrated plate, with switch slot and corner cuts to optimize switch tolerance.
5. Four versions: ANSI with badge (compact 660), ANSI without badge, Compatible-layout with badge, and compatible-layout without badge
6. PCB: fully programmable, QMK, type-C (center position connector), underglow, ESC 4XRGB, 3 hotswap LED slots above badge, Kaihua hotswap sockets for ANSI layouts, non-hotswap for compatible layouts. Compatible with PCB screw-in stabilizers.
7. Limited Edition full brass versions
8. Keyboard Design: oldcat and airpotter
9. PCB Design: DEMO Studio
10. Manufacturer: gray studio and factory


Supported Layouts
(https://i.imgur.com/DtazioD.jpg)
(https://i.imgur.com/T3w6CsT.png)


Group Buy Forms

Full Brass Raffle: April 13: 6:50AM-6:50PM PDT
Link to Brass Raffle Form: https://docs.google.com/forms/d/1Kqb9N0vQKTf8ifRm7FaxchaOwiOwQ3u5f7VU1CBUsGg/

Polycarbonate/Aluminum GB: April 14 6:50PM PDT - April 30
Link to Aluminum 6063 GB form: https://docs.google.com/forms/d/1VdI2czaCw4di53ntalcvGMlHlJaqR949d0QDGedKqyo/

Link to PC Form: https://docs.google.com/forms/d/1g47x4puu_xyECA1WHyrnbacP7MBZ9OHq-VtDV8z2_NA/


Feel free to pre-fill the forms and submit after GB opening time. All responses submitted prior to GB start time will be cleared.


Group Buy Payment Process
PayPal invoices will be issued in the order of sequence, you will have until the end of the Group Buy payment deadline window to pay the invoice. If you have questions or concerns about payments, ask before paying.

5% fees that include PayPal fee and currency exchange fees will be added.

Shipping fees will be billed based on your courier preference (SF Express or EMS/DHL). It should be noted that SF Express is cheaper for most part of the world.
SF Express: http://www.sf-express.com/sg/en/dynamic_function/price/
DHL: https://ratequote.dhl-usa.com/


Timeline
April 8th: The group forms will be submitted to Geekhack for approval. This is NOT when the group buy starts, but rather the GB post submission and approval. No options will be added or removed on/after April 8th. At this time, feel free to pre-fill the forms and submit after GB opening time.


April 13th: Full Brass Think65 GB // Raffle form opens. The form will be open for 12 total hours, from 6:50am PDT - 6:50pm PDT. Full brass is limited to only 25 units! This is not FCFS, but a raffle. Winners will be announced at 8:00PM PDT.

April 14th - April 30th: Think65 GB officially opens! The form will go live at 6:50pm PDT and stay open until April 30th or whenever we reach production capacity (which is a combined maximum of 650 units worldwide), whichever comes first. Both polycarbonate and aluminum versions will be available.

GB Fulfillment: Start fulfilling 4 months after GB payment collection, ships in order sequence.

Full Brass Think65 Details

Material: Thunk65 will be produced in THICC full brass!
Color choices: 18K Real Gold PVD, Black PVD, Rose Gold PVD.
Price: $650

Polycarbonate/Aluminum Think65 Details

Think65 will be produced in (a) regular Clear PC, (b) reinforced Black PC, and (c)Aluminum 6063.
Aluminum color choices: Midnight blue, Wavez Green, Tiffany blue, Space Gray, and Olivia Rose Gold.

Price: $299.98

What’s In The Box?

Each Think65 will include the following:
1x case, top and bottom
1x brass weight (gold PVD)
1x brass badge (gold PVD, not included with layout #2(b) or #4(d))
1x PCB
Plenty of screws, rubber feet, LEDs, box designed by airpotter.

Options // Accessories

Extra badges, weights, and PCBs will be available. Please read form for more details.

Raffle // Giveaway Details:

See oldcat's post below.

Order Track:

https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk/



Links of interest
Follow oldcat on Instagram (https://www.instagram.com/oldcat87/)
Follow graystudio on Instagram (https://www.instagram.com/graystudio01/)
Chat on Discord Channel (https://discord.gg/n3rtEpY)

Special Thanks:
To Spade, BHK1004, voxkey, Langelandia, urbantheii, eskimojo, Capsy, and many other Gray Discord members for the continuous feedback and strong support.
To Visionaire for helping with the Excel forms.
To Cary, PP, Scott, 虾饺一通, and other enthusiasts in the Chinese keeb community for letting me borrow your expensive keycaps and for the voluntary help with the photoshoot.
To EnjoyInSec and Olivia for sharing the color codes of their amazing sets for our new anodization colors.
To TopClack (Brian, Jae, and viewers) for the IC release-day discussions and suggestions.
Title: Re: 【GB】Think6.5
Post by: Signature on Tue, 09 April 2019, 09:03:24
Approved
Title: Re: 【GB】Think6.5
Post by: ReDsNoTDeAd on Tue, 09 April 2019, 09:06:18
I'm in! Lets go boys!!!
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 09:07:04

Form Submission Details
All Forms will be open for pre-fill, but all submissions prior to the GB open time will be cleared.
All Forms will be editable until they are closed. But be mindful that the timestamp of an edited form will be automatically updated to the last update time.
Note that in order to edit the form, you will need to click "Edit your response" after form submission and save your personal form link to edit later.

Eligible Brass Raffle Entries

https://docs.google.com/spreadsheets/d/1NV7Bg_dSPk-XMA5E5hmVRdMyF-sRA13kkGzmkzenK6I/

Brass Order Check:

https://docs.google.com/spreadsheets/d/1IzWqGK3syxxaAd8BGyGFQO61wzPBkRcEKvEAtTnfDG0/edit?usp=sharing

-------------------------------
Thanks to everyone who tuned in to watch the live stream random drawing!
------Brass raffle winning entries------
generic193
urbantheii #9650
mankikami
TyKute#8410
LOLingMAO
tskiller#0130
sykim0310
Audiobs
Morgan3Wheeler
octagon1337#8850
Minhjaa
TheysaidTEETH
rys
SolidCactus
henapkr
Youngr1189
codykala
skewed
Ho Young Kim
aslejoh on geekhack
Yahosh#0206
kev#1922
minhvo
Bhk1004
nat
Langelandia #6604
sallyday77
0x1337
SaM#2748
------------------------------

Order modification starts now till end of day Saturday:

https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/edit?usp=sharing

Submit an order modification request here: https://docs.google.com/forms/d/17gV584N-10I6C44J9FmjN8mLYMNsst1Mnv6roCC5vyU/

The PC/alu order forms will be open till April 30 end of day. Late joiners will be added to the order spreadsheet, or waitlisted if more than 500 valid orders are received.

We will prepare Excel form for invoicing this Sunday

We will send invoices starting Sunday, payment will be due in 7 days of the invoice date.



------------------------------

Giveaway Raffle Procedure and Details

Eligibility:

1. The invoice needs to be paid by the time raffle starts (raffle starts after payment deadline).
2. Follow @oldcat87 (https://www.instagram.com/oldcat87/) and @graystudio01 (https://www.instagram.com/graystudio01/) on Instagram.

Procedure:

On the day GB payment is fully collected, oldcat will draw the raffle winners. All orders will be ranked chronologically by order submission time to determine eligibility with the following raffles. Random number generators will be used to determine the winners. If the situation permits, oldcat will live stream the raffle process.

1. 1 randomly selected winner out of ALL orders will receive 70 pcs of Transparent GSUS Panda switches we purchased from a private China GB.
2. 3 randomly selected winners out of ALL orders will receive a $49.98 refund.
3. 6.5% (e.g., 500*6.5%=33 pcs) of randomly selected winners out of ALL orders will receive an additional special PC badge.
4. First 65 orders will be entered into a drawing of 1 winner of an anodized aluminum badge collection ($110 value).
5. First 100 orders (first 65 still eligible) will be entered into a drawing of 3 winners of 1 rose gold PVD brass weight ($30 value).
6. First 150 orders (first 100 still eligible, same applies below) will be entered into a drawing of 3 winners of 1 rose gold PVD brass badge ($20 value).
7. First 200 orders (first 150 still eligible, same applies below) will be entered into a drawing of 3 winners of 1 Wavez color aluminum badge.
8. We will announce additional giveaways after the whole GB completes, all GB participants will be eligible.
9. Raffle for Brass, PC, and Aluminum are combined for Giveaway #1, #2 and #3. Other raffle giveaways are combined for PC and Aluminum.


Notes: For fair raffle drawing purposes, if you plan to order multiple boards, please fill out multiple forms. Every order is eligible as one ticket for a raffle drawing. Shipping for multiple orders will be combined later on. If you win a raffle and you added optional items, your invoice will be partially refunded (pro-rated partial refund based on the stated value if the raffle item is part of the optional combo items).


Live streamed the raffle on Instagram, and here are the results:

https://docs.google.com/spreadsheets/d/1blZ07CFPSgISsZX9lWgjmE8l2V1kjlWdPbYJzek6jn4/



Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 09:07:14
Photo Album for the Prototypes: https://imgur.com/a/nr0e886

Sound test: https://soundcloud.com/oldcat87/think65-with-retooled-blacks



Note: the brass badges and weights in the prototypes have not been PVD treated. All gold brass badges and weights will receive 18k Gold PVD treatments!


Visuals:

Not a valid vimeo URL
Not a valid vimeo URL
Polycarb Scratch Tests:
1. With metal tweezer
Not a valid vimeo URL2. With plastic
Not a valid vimeo URL

(https://i.imgur.com/AinHFZY.jpg)

(https://i.imgur.com/Wa5YJyc.jpg)

Our second version of the PCB proto has completed. Here is a sample of the white solder mask, black trace colorway (production version will have all the RGB LEDs pre-soldered) and all the traces/prints will be clear.

(https://i.imgur.com/vwtp00Q.jpg)

(https://i.imgur.com/lNqka3H.jpg)

(https://i.imgur.com/AKN1wJZ.jpg)

(https://i.imgur.com/P10708V.jpg)

(https://i.imgur.com/KWAx9N6.jpg)

(https://i.imgur.com/I0yWxTP.jpg)

(https://i.imgur.com/HWijDbD.jpg)

(https://i.imgur.com/Y1wzmpx.jpg)

(https://i.imgur.com/D0OxUlJ.jpg)

(https://i.imgur.com/hJQHg7S.jpg)

(https://i.imgur.com/326S9ZV.jpg)

(https://i.imgur.com/LPhaDFZ.jpg)

(https://i.imgur.com/bH1WsT6.jpg)

(https://i.imgur.com/w4AOmmm.jpg)

(https://i.imgur.com/bH5JgUf.jpg)

(https://i.imgur.com/nfz1Ukd.jpg)

(https://i.imgur.com/VisiTOM.jpg)

(https://i.imgur.com/U3uctJs.jpg)

(https://i.imgur.com/qMuGYPa.jpg)

(https://i.imgur.com/Ldct2Eq.jpg)

(https://i.imgur.com/fSqdtVm.jpg)

(https://i.imgur.com/DxVcy73.jpg)

(https://i.imgur.com/zZPH312.jpg)

(https://i.imgur.com/RUK4yOB.jpg)

(https://i.imgur.com/7Bqn5Tx.jpg)

(https://i.imgur.com/9BuvtZV.jpg)

(https://i.imgur.com/08hXDwd.jpg)

(https://i.imgur.com/CYj5ln7.jpg)

(https://i.imgur.com/3qy5uar.jpg)

(https://i.imgur.com/Q1tUbih.jpg)

(https://i.imgur.com/4xxJoC2.jpg)

(https://i.imgur.com/zy1iNOx.jpg)

(https://i.imgur.com/oQHZBLg.jpg)

(https://i.imgur.com/0KzBpOr.jpg)

(https://i.imgur.com/zBcZ1OC.jpg)

(https://i.imgur.com/xQ6ubzE.png)

(https://i.imgur.com/femC4Iq.jpg)

(https://i.imgur.com/JJ9RHyI.jpg)

(https://i.imgur.com/9CDL0pf.jpg)

(https://i.imgur.com/GHT8cfD.jpg)

(https://i.imgur.com/zEeA1qM.jpg)

(https://i.imgur.com/YgeVP78.jpg)

(https://i.imgur.com/esa8KhA.jpg)

(https://i.imgur.com/aUJZJqR.jpg)

(https://i.imgur.com/LdFIeFn.jpg)

(https://i.imgur.com/iA2hCTt.jpg)

(https://i.imgur.com/XwMgkpQ.jpg)

(https://i.imgur.com/pHiPcUO.jpg)

(https://i.imgur.com/zxrksez.jpg)

(https://i.imgur.com/85nhkyx.jpg)

(https://i.imgur.com/59mL2RW.jpg)

(https://i.imgur.com/QJ99pSS.jpg)

(https://i.imgur.com/mhHIK9R.jpg)

(https://i.imgur.com/0bXAO80.jpg)
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 09:07:24
Think6.5, Update Log:

5-6-2019:

Full brass: final design file has been shipped to the factory.
PC/alu: all paypal invoices issued. Once payment is collected, we will confirm the final design and the production will start.
PCB: hotswap: second version (final) design is completed. We will make yet another 1-2 colors and make a final decision of the colorway soon.
        Compatible: prototype design is finished and sent to factory

5-27-2019:
All raffles done and announced. We will be working on the raffles on our end. No actions needed from participants.

5-30-2019:

Full brass production under way
Brass badges production under way

Sorry for the low-res images in factory

(https://i.imgur.com/59dSNTh.jpg)

(https://i.imgur.com/lfQndHP.jpg)

6-5-2019:

Designed packaging.

(https://i.imgur.com/Fb4jf4R.jpg)

(https://i.imgur.com/os8KbGm.jpg)
Title: Re: 【GB】Think6.5
Post by: eskimojo on Tue, 09 April 2019, 09:14:26
🤔6️⃣.5️⃣
Title: Re: 【GB】Think6.5
Post by: danielucf on Tue, 09 April 2019, 09:17:37
Let the hype building begin. Really surprised at that 650 limit

Edit:
(https://i.imgur.com/i5NzUxM.png)

Same price for a unit without a badge as with? Badges are $20 to add on and probably require the case to have extra milling time.
Title: Re: 【GB】Think6.5
Post by: rowie on Tue, 09 April 2019, 09:24:52
Love it! Wish the yellow was available so I can match it with my yellow canoe. Money saved for me I guess. Good luck with the sale oldcat. It was nice to follow the development of this keyboard at Discord.  :cool:
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 09:28:21
Folks, Raffle details and prototype pictures will be updated soon in the first few posts
Title: Re: 【GB】Think6.5
Post by: dhb82 on Tue, 09 April 2019, 10:28:18
Is it possible to edit the color? 😬
Title: Re: 【GB】Think6.5
Post by: Aznguyen316 on Tue, 09 April 2019, 10:29:51
Looking forward to this!

What is the origin shipping location?  I just want to check rates or estimated time to compare transit time vs rates to US.

If ordering the ANSI hotswap w/ badge, will the extra solder pcb still work with that integrated plate to utilize a split backspace?

Thanks all.
Title: Re: 【GB】Think6.5
Post by: calveeen on Tue, 09 April 2019, 10:35:43
Aw, we don't get to choose the colour of the brass weight when picking a board? :(
Title: Re: 【GB】Think6.5
Post by: TheMnBN on Tue, 09 April 2019, 10:57:24
Looking forward to this!

What is the origin shipping location?  I just want to check rates or estimated time to compare transit time vs rates to US.

If ordering the ANSI hotswap w/ badge, will the extra solder pcb still work with that integrated plate to utilize a split backspace?

Thanks all.

Base off the the pictures of plate cut-outs, if it's only the split backspace you're after then solder PCB will work with the hotswap plate. Oldcat and Airpotter will probably have a more detailed clarification for this.
Title: Re: 【GB】Think6.5
Post by: Aznguyen316 on Tue, 09 April 2019, 11:01:29
Base off the the pictures of plate cut-outs, if it's only the split backspace you're after then solder PCB will work with the hotswap plate. Oldcat and Airpotter will probably have a more detailed clarification for this.

Thanks.  I'll ask this over on the IC thread.
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 11:05:28
Let the hype building begin. Really surprised at that 650 limit

Edit:
Show Image
(https://i.imgur.com/i5NzUxM.png)


Same price for a unit without a badge as with? Badges are $20 to add on and probably require the case to have extra milling time.

Yes non-badge is a bit cheaper to make but the price is still way below comparable offerings :)
One price to make everything simple and clear.
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 11:06:36
Looking forward to this!

What is the origin shipping location?  I just want to check rates or estimated time to compare transit time vs rates to US.

Guangzhou, China

If ordering the ANSI hotswap w/ badge, will the extra solder pcb still work with that integrated plate to utilize a split backspace?

Ansi will not allow split BS if you check the layout graph. The soldering pcb can be used for ansi for sure.


Thanks all.
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 11:07:56
Aw, we don't get to choose the colour of the brass weight when picking a board? :(

Standardize as much as we can for default options to ensure we fulfill on schedule.
There will be options to purchase additional badges.
Title: Re: 【GB】Think6.5
Post by: sleepybrett on Tue, 09 April 2019, 11:24:35
Probably would have been perfect for laser, alas no split spacebar support.
Title: Re: 【GB】Think6.5
Post by: DukeEsquire on Tue, 09 April 2019, 11:36:43
GLWS!

I'll be in for at least one.

Glad to see that the maximum cap is reasonable.
Title: Re: 【GB】Think6.5
Post by: danielucf on Tue, 09 April 2019, 12:36:27
Yes non-badge is a bit cheaper to make but the price is still way below comparable offerings :)
One price to make everything simple and clear.


If I'll be paying for it I can request to have my badge included with a no badge board? Would be cool to have a Think6.5 badge as a desk trinket.
Title: Re: 【GB】Think6.5
Post by: mastercheif116 on Tue, 09 April 2019, 13:46:27
I'm a bit confused. I filled out the PC order form since the link worked for me, but it also says that it won't be open until 4/14.

Do I need to fill out the form again on the 14th? I don't want to double order.

Thanks!
Title: Re: 【GB】Think6.5
Post by: pcire on Tue, 09 April 2019, 13:56:19
I'm a bit confused. I filled out the PC order form since the link worked for me, but it also says that it won't be open until 4/14.

Do I need to fill out the form again on the 14th? I don't want to double order.

Quote
All responses submitted prior to GB start time will be cleared.

You will have to fill out the form again.
I believe the form is there so that you can take a look and decide what you want to get.  They don't want you to fill out just to be one of the first orders to get on the raffles and then later change your order.
Title: Re: 【GB】Think6.5
Post by: nothingless7 on Tue, 09 April 2019, 14:13:47
I think there’s a typo in the order form. It says layouts ‘a’ and ‘c’ to include hotswap pcb, but it should be ‘a’ and ‘b’.


Sent from my iPad using Tapatalk
Title: Re: 【GB】Think6.5
Post by: bball2 on Tue, 09 April 2019, 14:22:12
After how well the Cod67 group buy went, I'm definitely joining this as well!
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 15:23:30
Yes non-badge is a bit cheaper to make but the price is still way below comparable offerings :)
One price to make everything simple and clear.


If I'll be paying for it I can request to have my badge included with a no badge board? Would be cool to have a Think6.5 badge as a desk trinket.

We will figure something out :)
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 15:24:17
I'm a bit confused. I filled out the PC order form since the link worked for me, but it also says that it won't be open until 4/14.

Do I need to fill out the form again on the 14th? I don't want to double order.

Thanks!

Hey, the forms are for preview. All responses before the GB opening time will be cleared. Thanks! Sorry for the confusion
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 15:24:49
I think there’s a typo in the order form. It says layouts ‘a’ and ‘c’ to include hotswap pcb, but it should be ‘a’ and ‘b’.


Sent from my iPad using Tapatalk

Indeed, thanks, I have just corrected it, and much appreciated!
Title: Re: 【GB】Think6.5
Post by: DukeEsquire on Tue, 09 April 2019, 15:56:44
Yes non-badge is a bit cheaper to make but the price is still way below comparable offerings :)
One price to make everything simple and clear.


If I'll be paying for it I can request to have my badge included with a no badge board? Would be cool to have a Think6.5 badge as a desk trinket.

We will figure something out :)

I hope you guys will consider giving a badge even for the folks that choose a "no badge" board. I'd like to keep the badge anyways!
Title: Re: 【GB】Think6.5
Post by: AlcoholEnthusiast on Tue, 09 April 2019, 17:13:57
Yes non-badge is a bit cheaper to make but the price is still way below comparable offerings :)
One price to make everything simple and clear.


If I'll be paying for it I can request to have my badge included with a no badge board? Would be cool to have a Think6.5 badge as a desk trinket.

Yeah I am going no badge too, but would still like the PVD Badge if possible.
Title: Re: 【GB】Think6.5
Post by: PotatoTM on Tue, 09 April 2019, 17:17:12
Never seen black PC before, excited to see the prototype pics!
Title: Re: 【GB】Think6.5
Post by: oldcat on Tue, 09 April 2019, 23:03:54
Upon actual usage of the frost clear PC version, I have made the decision to increase the underglow from 8 LEDs to 14 LEDs. Thanks all, for the suggestions.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Darknight00z on Wed, 10 April 2019, 02:15:34
Thanks for the update! How heavy is the prototype?
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Spade on Wed, 10 April 2019, 02:28:43
Thanks for the update! How heavy is the prototype?

Looking at about 1kg!

(https://cdn.discordapp.com/attachments/549630609111253002/565308371822182411/image0.jpg)
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Moridin on Wed, 10 April 2019, 03:52:32
Does the PC GB start at the same time as the aluminum one?

P.S. That’s 3:50:00 am CEST | Monday, April 15, 2019 for people in the EU.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Full on Wed, 10 April 2019, 04:07:55
Hey, I am a complete keyboard noob, but I really like the look of this keyboard, how much will the full brass and the aluminium versions weigh approx?

Kind regards
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Bhk1004 on Wed, 10 April 2019, 09:07:15
Brass around 4-5kg. Alum ~1.5kg.


Omfg I'm so excited!
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Full on Wed, 10 April 2019, 09:23:28
Brass around 4-5kg. Alum ~1.5kg.


Omfg I'm so excited!

Thank you :) I have already entered the Brass raffle :)

Another "stupid" question, as most of what is written in these Group buys are greek to me with all the acronyms and english not being my first language :P

QQ
Extra PVD Brass Badge + Weight ($50) *
QQ

This option (which I chose..), is this already included in the main package? And will not add any additional weight to the base package?..

Once again, I am sorry that I dont know to much about all this stuff, a bit overwhelming.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Bhk1004 on Wed, 10 April 2019, 09:36:13
Brass around 4-5kg. Alum ~1.5kg.


Omfg I'm so excited!

Thank you :) I have already entered the Brass raffle :)

Another "stupid" question, as most of what is written in these Group buys are greek to me with all the acronyms and english not being my first language :P

QQ
Extra PVD Brass Badge + Weight ($50) *
QQ

This option (which I chose..), is this already included in the main package? And will not add any additional weight to the base package?..

Once again, I am sorry that I dont know to much about all this stuff, a bit overwhelming.

2 things.

1. Any entry before the start time/date will be purged before the start of the GB/Raffle, so you need to actually enter for the brass raffle in the time listed below (in the first post.) The forms are only opened now so that everyone can review their options.

Full Brass Raffle: April 13: 6:50AM-6:50PM PDT

2. The extra PVD Brass/Weight options is purely to have additional colors, this will not increase the weight of your keyboard. There are 3 pvd options Black/Rose gold/Gold. The extra option is so that you can have 2 color options if that is what you wish.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Full on Wed, 10 April 2019, 09:57:54
Brass around 4-5kg. Alum ~1.5kg.


Omfg I'm so excited!

Thank you :) I have already entered the Brass raffle :)

Another "stupid" question, as most of what is written in these Group buys are greek to me with all the acronyms and english not being my first language :P

QQ
Extra PVD Brass Badge + Weight ($50) *
QQ

This option (which I chose..), is this already included in the main package? And will not add any additional weight to the base package?..

Once again, I am sorry that I dont know to much about all this stuff, a bit overwhelming.

2 things.

1. Any entry before the start time/date will be purged before the start of the GB/Raffle, so you need to actually enter for the brass raffle in the time listed below (in the first post.) The forms are only opened now so that everyone can review their options.

Full Brass Raffle: April 13: 6:50AM-6:50PM PDT

2. The extra PVD Brass/Weight options is purely to have additional colors, this will not increase the weight of your keyboard. There are 3 pvd options Black/Rose gold/Gold. The extra option is so that you can have 2 color options if that is what you wish.

Thank you so much for your help! Have put on an alarm on my phone for the drop :)
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Poblopuablo on Wed, 10 April 2019, 11:19:15
Any pictures of the "Glass-fiber enhanced black PC"?
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Wed, 10 April 2019, 18:17:27
Any pictures of the "Glass-fiber enhanced black PC"?

There is one in the album, I will try to take a few more. It feels the same as the frosted clear PC except for the color.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: kolyz on Wed, 10 April 2019, 21:33:54
When is the build stream going to be uploaded to youtube?
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Wed, 10 April 2019, 22:35:08
When is the build stream going to be uploaded to youtube?

Hey the build stream is not archived it seems. I have done a few typing tests and will do a few more. So far it's very nice. My findings:

1. Holy Panda sound is being amplified and it's very thocky. Therefore, if you plan to use it in an open office environment, be warned that your colleague may shoot you.
2. Kaihua Cream sound is less high pitched as in another alu plate. I think I don't like the sound that much.
3. Gateron linear (I used the recently released Gateron mint switch) achieves a better result than Kaihua Creams.
4. Lubed Retooled blacks (63.5g SPRiT springs) with GMK caps achieve the best (in my opinion), it's a heavenly sound and feeling to me.
5. PC plates, even at 4.5mm, are quite flexible, and it is not harsh bottoming out (at all).
6. This German PC case is much more robust than I thought. I have probably opened and screwed back 5 times today already, still intact no stripped screw threads YET. But of course, be careful if you do buy a PC version, I am sure you can still strip it if you use maximum force.

Unfortunately, I just broke my finger earlier today but will slowly upload some videos. It took me a while to type the above...
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: ninjacore on Thu, 11 April 2019, 01:12:56
Yikes! Hope the finger heals quickly. We’re gonna need that story, though :)

Would love similar information on the alu version and let us know when the build stream is up, please.  Thanks!
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Thu, 11 April 2019, 01:23:06
Yikes! Hope the finger heals quickly. We’re gonna need that story, though :)

Would love similar information on the alu version and let us know when the build stream is up, please.  Thanks!

Thanks! The Alu version proto is coming out soon, but I figure it won't be too much of a surprise as many have used M60A and Doro, and upcoming Koyu uses a similar plate design. M60a is widely accepted, works great especially with linear switches. One difference is that the bottom piece of Think6.5 is much thicker than the above-mentioned boards, should make it sound more solid (very little hollow space).

Also, after using the PC version for a bit, I think most likely mixing alu and pc should work fine and will be pretty sick, something I am keen to test out.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: ninjacore on Thu, 11 April 2019, 01:25:50
Good to hear. Will you have hands on w the alu build before the 14th? I’d love to hear opinions from someone who’s used both.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Thu, 11 April 2019, 01:30:16
Good to hear. Will you have hands on w the alu build before the 14th? I’d love to hear opinions from someone who’s used both.

Unfortunately not. It should be available during the GB though but it will unlikely reach my hands. As I said, Potter has so much experience with manufacturing Alu boards, the chance of messing alu up is probably close to zero. PC is newer and more challenging even for experienced manufacturers, therefore it has been my focus.

That said, I have requested that I will test every layout / every material before production starts.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: ninjacore on Thu, 11 April 2019, 02:28:37
Sounds good, thanks. Trying to decide between the two, but I’ll probably just end up getting both lol
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Zurg Eon on Thu, 11 April 2019, 02:32:23
Yikes! Hope the finger heals quickly. We’re gonna need that story, though :)

Would love similar information on the alu version and let us know when the build stream is up, please.  Thanks!

Thanks! The Alu version proto is coming out soon, but I figure it won't be too much of a surprise as many have used M60A and Doro, and upcoming Koyu uses a similar plate design. M60a is widely accepted, works great especially with linear switches. One difference is that the bottom piece of Think6.5 is much thicker than the above-mentioned boards, should make it sound more solid (very little hollow space).

Also, after using the PC version for a bit, I think most likely mixing alu and pc should work fine and will be pretty sick, something I am keen to test out.

Would it be possible to buy an extra PC case bottom piece with an alu version? I have already settled for an alu board this round, but would be interested in trying to mix it with a PC case underside to allow for underglow to work.
Otherwise I'll wait and hope for a future Bluetooth version of Think6.5 with a frosted PC case, maybe slightly higher profile to accommodate a beefy battery to allow for many hours of underglow goodness on the couch. This time I'd buy a badge version as it would provide a convenient surface for the thumb when you grab and move the board around. A Bluetooth version of this board would be my endgame for use on the couch with my HTPC. A man can dream!
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: kolyz on Thu, 11 April 2019, 08:45:53
When is the build stream going to be uploaded to youtube?

Hey the build stream is not archived it seems. I have done a few typing tests and will do a few more. So far it's very nice. My findings:

1. Holy Panda sound is being amplified and it's very thocky. Therefore, if you plan to use it in an open office environment, be warned that your colleague may shoot you.
2. Kaihua Cream sound is less high pitched as in another alu plate. I think I don't like the sound that much.
3. Gateron linear (I used the recently released Gateron mint switch) achieves a better result than Kaihua Creams.
4. Lubed Retooled blacks (63.5g SPRiT springs) with GMK caps achieve the best (in my opinion), it's a heavenly sound and feeling to me.
5. PC plates, even at 4.5mm, are quite flexible, and it is not harsh bottoming out (at all).
6. This German PC case is much more robust than I thought. I have probably opened and screwed back 5 times today already, still intact no stripped screw threads YET. But of course, be careful if you do buy a PC version, I am sure you can still strip it if you use maximum force.

Unfortunately, I just broke my finger earlier today but will slowly upload some videos. It took me a while to type the above...
Thanks a lot for the detailed answer regarding the typing experience with different switches! I was definitely planning on using holy pandas with this but it will be at home. If it gets too loud, maybe ill throw in some tealios or inks instead  ;D
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: MOON on Thu, 11 April 2019, 10:54:38
I feel like the amplification is going to make the board fun to type on. Def throwing pandas in this bad boy.

Have you guys put Red Pandas in there? Curious how those fat boys would look against the PC.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: nguyenhimself on Thu, 11 April 2019, 11:59:08
I found the badge color pic in the PC form very hard to see. Can you add a pic with no plastic case?
Thanks.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Ashardalon on Thu, 11 April 2019, 12:03:32
Really sad that I'm pretty much out of funds right now as I'd love to get that teal aluminium, it looks beautiful!
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: voxkey on Thu, 11 April 2019, 12:35:01
Yikes! Hope the finger heals quickly. We’re gonna need that story, though :)

Would love similar information on the alu version and let us know when the build stream is up, please.  Thanks!

Thanks! The Alu version proto is coming out soon, but I figure it won't be too much of a surprise as many have used M60A and Doro, and upcoming Koyu uses a similar plate design. M60a is widely accepted, works great especially with linear switches. One difference is that the bottom piece of Think6.5 is much thicker than the above-mentioned boards, should make it sound more solid (very little hollow space).

Also, after using the PC version for a bit, I think most likely mixing alu and pc should work fine and will be pretty sick, something I am keen to test out.

Would it be possible to buy an extra PC case bottom piece with an alu version? I have already settled for an alu board this round, but would be interested in trying to mix it with a PC case underside to allow for underglow to work.
Otherwise I'll wait and hope for a future Bluetooth version of Think6.5 with a frosted PC case, maybe slightly higher profile to accommodate a beefy battery to allow for many hours of underglow goodness on the couch. This time I'd buy a badge version as it would provide a convenient surface for the thumb when you grab and move the board around. A Bluetooth version of this board would be my endgame for use on the couch with my HTPC. A man can dream!

To keep things simple, separate tops and bottoms won't be offered. While oldcat is pretty sure PC and Alu tops/bottoms would line up correctly, there is always a chance they won't.

You could always grab two though for some mix and match action :)
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Thu, 11 April 2019, 16:07:07
I found the badge color pic in the PC form very hard to see. Can you add a pic with no plastic case?
Thanks.

Updated a few badge pictures.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: Zurg Eon on Thu, 11 April 2019, 17:49:46
Those new pictures of the black PC board and with the translucent keycaps look amazing. I would like to sincerely thank everyone involved in this project. It brings me joy.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Thu, 11 April 2019, 18:16:17
Those new pictures of the black PC board and with the translucent keycaps look amazing. I would like to sincerely thank everyone involved in this project. It brings me joy.

Thanks brother, glad you like the new pictures!

I used to be a professional photographer when I was in graduate school. Quit that hobby and picked up keebs. Now I just use iPhone and it works quite ok with still images.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Thu, 11 April 2019, 18:19:01
For those of you confused about the lighting sources. There has been a few improvements:

1. 4XRGB on ESC stays as is, it uses the same channel as underglow
2. Underglow increased from 1 row of 8 to two rows of 7 each (14 total)
3. The light strip diffuser part, 3 hotswap LEDs will be separately controllable (from underglow) as you activate/deactivate a backlighting layer. So you will be able to turn the light on and off without pushing the capslock key. In the prototype, it is a indicator light but I realized how little I actually use capslock. Never used other indicator keys.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: TheMnBN on Thu, 11 April 2019, 19:50:16
I think someone has mentioned this in the IC thread but I also think that communication should be done only in this GB thread and locking the IC.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: gl0w on Thu, 11 April 2019, 23:24:51
This is kind of a dumb question but do the brass weights stay situated in the case only from friction? Never the less I'm 100% joining this GB.   ^-^ ^-^ ^-^
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Fri, 12 April 2019, 00:12:42
This is kind of a dumb question but do the brass weights stay situated in the case only from friction? Never the less I'm 100% joining this GB.   ^-^ ^-^ ^-^

2 M3 screws fix it to the bottom case.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: lbaron on Fri, 12 April 2019, 08:00:58
Have you thought about using plastic screws for the PC board (I might even buy some from local hardware store)? I feel plastic threads with yield long before PC threads would strip due to over tightening.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: kolyz on Fri, 12 April 2019, 08:38:26
Not quite sure which shipping company to use, what is the difference between the two?
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Fri, 12 April 2019, 09:43:36
Have you thought about using plastic screws for the PC board (I might even buy some from local hardware store)? I feel plastic threads with yield long before PC threads would strip due to over tightening.

I did try nylon and pc screws. I feel they are susceptible to being broken. That said I managed not to strip any threads after opening the case 6-7 times after I received it. Just need some caution not to overtighten I guess. I feel screws probably won’t help much if you apply too much force, the key is really be aware of it and do not apply too much force.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Fri, 12 April 2019, 09:45:48
Not quite sure which shipping company to use, what is the difference between the two?

I have not used DHL to ship yet. I did search online and it’s more expensive (but some say their service to some countries is better) if you do plan to select DHL please do some research.

We will use SF Express as the default. For North America and Asia I have some experience and it’s pretty good.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: kolyz on Fri, 12 April 2019, 09:47:09
Not quite sure which shipping company to use, what is the difference between the two?

I have not used DHL to ship yet. I did search online and it’s more expensive (but some say their service to some countries is better) if you do plan to select DHL please do some research.

We will use SF Express as the default. For North America and Asia I have some experience and it’s pretty good.
Good to know! How much do you estimate the package might weight so that I can estimate shipping to me? :)
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Fri, 12 April 2019, 10:11:02
Not quite sure which shipping company to use, what is the difference between the two?

I have not used DHL to ship yet. I did search online and it’s more expensive (but some say their service to some countries is better) if you do plan to select DHL please do some research.

We will use SF Express as the default. For North America and Asia I have some experience and it’s pretty good.
Good to know! How much do you estimate the package might weight so that I can estimate shipping to me? :)

PC board assembled is 1KG. I think with box, packaging and everything 2kg is quite safe. Aluminum budget for 2.5kg.
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: kolyz on Fri, 12 April 2019, 12:22:54
Not quite sure which shipping company to use, what is the difference between the two?

I have not used DHL to ship yet. I did search online and it’s more expensive (but some say their service to some countries is better) if you do plan to select DHL please do some research.

We will use SF Express as the default. For North America and Asia I have some experience and it’s pretty good.
Good to know! How much do you estimate the package might weight so that I can estimate shipping to me? :)

PC board assembled is 1KG. I think with box, packaging and everything 2kg is quite safe. Aluminum budget for 2.5kg.
thanks a lot man, you're the best <3
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: oldcat on Fri, 12 April 2019, 21:20:01
Not quite sure which shipping company to use, what is the difference between the two?

I have not used DHL to ship yet. I did search online and it’s more expensive (but some say their service to some countries is better) if you do plan to select DHL please do some research.

We will use SF Express as the default. For North America and Asia I have some experience and it’s pretty good.
Good to know! How much do you estimate the package might weight so that I can estimate shipping to me? :)

PC board assembled is 1KG. I think with box, packaging and everything 2kg is quite safe. Aluminum budget for 2.5kg.
thanks a lot man, you're the best <3

Thanks for the kind words!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 01:29:07
Just confirmed with Potter that all default brass badges and weights will receive 18K Gold PVD.

Full brass, if you choose gold color, full surface will be treated with 18K gold PVD
Title: Re: [GB] Think6.5° (Launch 4/13)
Post by: ian13 on Sat, 13 April 2019, 03:47:52
When is the build stream going to be uploaded to youtube?

Hey the build stream is not archived it seems. I have done a few typing tests and will do a few more. So far it's very nice. My findings:

2. Kaihua Cream sound is less high pitched as in another alu plate. I think I don't like the sound that much.
3. Gateron linear (I used the recently released Gateron mint switch) achieves a better result than Kaihua Creams.

Unfortunately, I just broke my finger earlier today but will slowly upload some videos. It took me a while to type the above...

Oh no,I was planning to put cream switches on this. Is it really that bad? You said that it doesn't sound high pitched, which is good IMO, but what made you dislike the sound??
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: cucgach on Sat, 13 April 2019, 04:22:37
Just confirmed with Potter that all default brass badges and weights will receive 18K Gold PVD.

Full brass, if you choose gold color, full surface will be treated with 18K gold PVD

that's .. Dubai :))) so exciting to join this GB.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sat, 13 April 2019, 09:02:18
Just a heads up, brass raffle is live. Please get your entry in if you are interested!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Full on Sat, 13 April 2019, 09:03:46
I had my alarm on and set in my entry on the minute.. since this is the ultimate and PERFECT keyboard for my setup, I am a bit curious if someone can confirm my entry?

Crossing all fingers and toes :)

Kind regards,
Asle
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Sat, 13 April 2019, 09:20:24
Will the compatible solder PCB work with the ANSI hotswap integrated plate?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 09:27:04
Will the compatible solder PCB work with the ANSI hotswap integrated plate?

Yes
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Sat, 13 April 2019, 10:44:57
Would it be possible to install the switch 4xLED in additional switch locations for an extra charge?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 11:42:28
Would it be possible to install the switch 4xLED in additional switch locations for an extra charge?

Hello, you might be able to purchase 4XRGB kit from Scott Wei. It will need to be soldered using wires to the GOV. Sorry we do not offer soldering service...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sat, 13 April 2019, 17:07:29
Less than 4 hours left on brass raffle guys! Want to make sure everyone who wanted in gets in
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: mrboli on Sat, 13 April 2019, 20:38:56
There is no raffle to give away a board / case right (just switches / reduce prices / badges / weights)?
Specifically, no full-brass case / board giveaway.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sat, 13 April 2019, 20:56:19
There is no raffle to give away a board / case right (just switches / reduce prices / badges / weights)?
Specifically, no full-brass case / board giveaway.

these is no full keyboard give away.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sat, 13 April 2019, 20:56:40
Brass raffle is closed!!!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 21:38:09
streaming brass raffle on Instagram live in a few mins.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ProlificPanda on Sat, 13 April 2019, 23:01:23
On the hot swap PCB, is there an option for split backspace if we desolder the socket?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 23:03:11
On the hot swap PCB, is there an option for split backspace if we desolder the socket?

Sorry hotswap is only compatible with ANSI with stepped caps support ...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ProlificPanda on Sat, 13 April 2019, 23:06:01
On the hot swap PCB, is there an option for split backspace if we desolder the socket?

Sorry hotswap is only compatible with ANSI with stepped caps support ...

No worries; thanks for the quick answer. Guess an extra PCB it is!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sat, 13 April 2019, 23:09:24
On the hot swap PCB, is there an option for split backspace if we desolder the socket?

Sorry hotswap is only compatible with ANSI with stepped caps support ...

No worries; thanks for the quick answer. Guess an extra PCB it is!

One cool feature. The PCB can perfectly sit against the plate, for the non-hotswap pcb, you can screw the pcb to the plate before soldering. It will make the soldering easier and more accurate.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: TheMnBN on Sun, 14 April 2019, 07:31:30
I just want to confirm that the links to the GB forms won't be changed and that as long as I submit the form after the designated start  time, I will have a valid entry. Is there a confirmation for placing an order successfully? TIA
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sun, 14 April 2019, 09:03:26
I just want to confirm that the links to the GB forms won't be changed and that as long as I submit the form after the designated start  time, I will have a valid entry. Is there a confirmation for placing an order successfully? TIA

Correct on the forms. Not sure if there will be confirmation.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 10:44:09
I just want to confirm that the links to the GB forms won't be changed and that as long as I submit the form after the designated start  time, I will have a valid entry. Is there a confirmation for placing an order successfully? TIA

Hey yes, as long as you submit between 6:50PM tonight PT time
And I will share and update the valid entry list in a google spreadsheet
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: cucgach on Sun, 14 April 2019, 11:18:57
is this the correct time and date for PC entry?

[attachimg=1]
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 11:38:00
All: pls note that all forms submitted prior to 6:50 pm pacific time will be cleared!
Feel free to prefill and submit after GB open time. Thanks!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 12:12:34
To calculate estimated shipping fees, please use “Guangzhou, China” as the originating city, and budget 2kg for PC package and 2.5kg for the aluminum package
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Sun, 14 April 2019, 12:19:19
Will unpaid brass invoices be re-raffled?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: maximize on Sun, 14 April 2019, 12:29:31
Anyone else in the Midwest USA getting something like $180 shipped through DHL, versus $30 through SF Express?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ninjacore on Sun, 14 April 2019, 13:38:40
Anyone else in the Midwest USA getting something like $180 shipped through DHL, versus $30 through SF Express?
Haven't checked yet, but good to hear at least one option is only $30 :shrug:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Zurg Eon on Sun, 14 April 2019, 14:05:31
Anyone else in the Midwest USA getting something like $180 shipped through DHL, versus $30 through SF Express?
To send 2,5 kg to Norway I got 565 CNY ($85 USD) through SF Express and a whopping $254.95 through DHL.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Wojtko on Sun, 14 April 2019, 14:14:53
Anyone else in the Midwest USA getting something like $180 shipped through DHL, versus $30 through SF Express?
To send 2,5 kg to Norway I got 565 CNY ($85 USD) through SF Express and a whopping $254.95 through DHL.
Guy from Poland here,
I feel you :/


Unfortunately, I must skip this beauty :c
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Bhk1004 on Sun, 14 April 2019, 14:45:58
Will unpaid brass invoices be re-raffled?

Unpaid will go fcfs based on raffle entry order.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 14:51:18
So why does DHL cost me $20 from KBDFans and $170 for this?  If this is accurate, definitely not going with DHL...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 15:18:27
So why does DHL cost me $20 from KBDFans and $170 for this?  If this is accurate, definitely not going with DHL...

Wei might have a regular business account with them and most of his items are relatively light.

For this GB we will negotiate rates with DHL as well so won't be $170, but realistically there is no way it will be cheaper than SF Express.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 15:19:52
Will unpaid brass invoices be re-raffled?

Unpaid brass invoices will go FCFS based on form submission time. Thanks brother.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 15:21:29
Anyone else in the Midwest USA getting something like $180 shipped through DHL, versus $30 through SF Express?

For US buyers, it will be pretty safe to use SF Express. I have shipped more than 50 packages from China to myself, usually 5 business days to large cities.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 16:38:34
Full brass order information has been updated, please follow this spreadsheet, and dm me in discord if you have any questions:

https://docs.google.com/spreadsheets/d/1IzWqGK3syxxaAd8BGyGFQO61wzPBkRcEKvEAtTnfDG0/edit?usp=sharing
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Sun, 14 April 2019, 20:42:50
all forms will be cleared right before 6:50 pacific time
If you submitted earlier pls submit again after GB start time, thank you.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: tunadesu on Sun, 14 April 2019, 20:48:08
Would love to see some more pics of the black pc with different caps/badge colors sometime before the GB closes. Im definitely in for frost, but just need to visualize the black more to possibly snag one as well :)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 20:49:12
Can we change shipping later if a deal with DHL is made and it's more palatable than what their estimator shows?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: mellen on Sun, 14 April 2019, 20:51:36
In, looking forward to this
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: tunadesu on Sun, 14 April 2019, 20:51:46
submitted right as my phone hit 6:50 :)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 20:52:37
And I'll be the one to ask, as someone always does...  Can we see submission to verify our selected options?  Just get a blank form when I go back to it.  ;D
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: TheMnBN on Sun, 14 April 2019, 20:53:34
I've never submitted a GB form this fast  :))
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ProlificPanda on Sun, 14 April 2019, 20:55:23
And I'll be the one to ask, as someone always does...  Can we see submission to verify our selected options?  Just get a blank form when I go back to it.  ;D

+1. I set an alarm to make sure I got my orders in but there isn't much confirmation after submitting.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 20:58:46
+1. I set an alarm to make sure I got my orders in but there isn't much confirmation after submitting.

I actually waited 3 seconds just to help make sure I didn't get into a race condition with clearing the forms...  Hope I didn't bump myself out of a good raffle tier  :p  Or submit prior to form clearing  :eek:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: TheMnBN on Sun, 14 April 2019, 21:00:26
+1. I set an alarm to make sure I got my orders in but there isn't much confirmation after submitting.

I actually waited 3 seconds just to help make sure I didn't get into a race condition with clearing the forms...  Hope I didn't bump myself out of a good raffle tier  :p

Hey, I did a whole 10 seconds wait just in case too  :thumb:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ProlificPanda on Sun, 14 April 2019, 21:03:41
+1. I set an alarm to make sure I got my orders in but there isn't much confirmation after submitting.

I actually waited 3 seconds just to help make sure I didn't get into a race condition with clearing the forms...  Hope I didn't bump myself out of a good raffle tier  :p  Or submit prior to form clearing  :eek:

Funny how many of us think alike. I too waited a couple seconds after "just in case"; but I really wanted to click submit right when the clock rolled over.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 21:05:30
I'd like to at least know if I made it after the form clearing.  That would suck if I was too quick on the trigger...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Sun, 14 April 2019, 21:12:13
Funny how many of us think alike. I too waited a couple seconds after "just in case"; but I really wanted to click submit right when the clock rolled over.

Keyboard geeks are pack animals; mainly because others lack understanding of what makes a keyboard worth hundreds of dollars...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: lugiish82 on Sun, 14 April 2019, 21:17:14
I accidentally submitted the form twice because I needed to change the shipping. Is that going to be okay?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: joelmats3 on Sun, 14 April 2019, 21:27:48
Yeah I was also wondering how to edit my response. I didn't receive a confirmation email with the edit link.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: mrboli on Sun, 14 April 2019, 21:44:21
I also might have double submitted! Sorry oldcat / potter, not sure how to revoke it if there's two.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: MackayOB on Sun, 14 April 2019, 22:04:30
Submitted my form excited for the case!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: chriszhu on Sun, 14 April 2019, 22:07:37
I am so excited for the Think6.5 🙃
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 00:03:58
I accidentally submitted the form twice because I needed to change the shipping. Is that going to be okay?

We will do an order checkup before invoicing.
And at that time feel free to dm me in discord if you want to change or cancel.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: AlcoholEnthusiast on Mon, 15 April 2019, 00:21:15
I'm in!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: bball2 on Mon, 15 April 2019, 00:37:07
Submitted, went with tiffany teal + layout A
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: igke on Mon, 15 April 2019, 00:53:48
Set a reminder for this. In it to win it! My first Board GB :)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: coffeeshopcoder on Mon, 15 April 2019, 04:15:50
Will you post here once the order list is merged and complete ?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: courtcodes on Mon, 15 April 2019, 09:34:18
First ever keyboard group buy here too! Just submitted my form!

Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 10:12:09
Will you post here once the order list is merged and complete ?

Yes a spreadsheet will be posted before invoices are sent out
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Mon, 15 April 2019, 10:24:30
Is there a way to make sure we submitted after the form purge and didn't get our entry wiped?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: KevlarBear on Mon, 15 April 2019, 10:37:38
Is there a way to make sure we submitted after the form purge and didn't get our entry wiped?

+1 to this, preferably before the form stops accepting new entries due to reaching manufacturing capacity so we can get our order in if its not in the list
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 11:34:07
Is there a way to make sure we submitted after the form purge and didn't get our entry wiped?

Hey brother, I will post a spreadsheet with all eligible entries before invoices go out.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 11:51:22
We are reaching our capacity soon.

China ~150+
GH ~350+

I am sure there will be some duplicate submissions, and if we reach capacity early the GB will end early and late submissions will be FCFS for unpaid spots.

Invoices will go out after order check forms are shared and order modification period ends. After order check period, invoices will be sent and by that time orders cannot be modified.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Mon, 15 April 2019, 11:58:08
We are reaching our capacity soon.

China ~150+
GH ~350+

I am sure there will be some duplicate submissions, and if we reach capacity early the GB will end early and late submissions will be FCFS for unpaid spots.

This was mainly the concern with making sure form was submitted after you purged them at the beginning.  If we happened to submit prior to your purge, trying to get top 50 for raffles, and don't know until you release the spreadsheet prior to invoices, it may be too late to submit a new form before reaching capacity.  Kind of a double-edged sword with the raffling order and form purging at beginning ;-)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: TheMnBN on Mon, 15 April 2019, 11:59:11
We are reaching our capacity soon.

China ~150+
GH ~350+

I am sure there will be some duplicate submissions, and if we reach capacity early the GB will end early and late submissions will be FCFS for unpaid spots.

Great news!  :thumb: Just hope my super early form submission didn't get caught in the wipe.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ninjacore on Mon, 15 April 2019, 12:38:18
Wow, that was fast!

Yea, some confirmation of submission acceptance would be great.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: PotatoTM on Mon, 15 April 2019, 13:51:08
We are reaching our capacity soon.

China ~150+
GH ~350+

I am sure there will be some duplicate submissions, and if we reach capacity early the GB will end early and late submissions will be FCFS for unpaid spots.

This was mainly the concern with making sure form was submitted after you purged them at the beginning.  If we happened to submit prior to your purge, trying to get top 50 for raffles, and don't know until you release the spreadsheet prior to invoices, it may be too late to submit a new form before reaching capacity.  Kind of a double-edged sword with the raffling order and form purging at beginning ;-)

It was purged ~10 minutes early so that shouldn't have been an issue, Oldcat has already messaged those that submitted too early (2 people at 6:49:59) so if you weren't contacted you probably got it in properly. Now we're waiting for the form to see who got top 65 :P
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Mon, 15 April 2019, 14:16:25
It was purged ~10 minutes early so that shouldn't have been an issue, Oldcat has already messaged those that submitted too early (2 people at 6:49:59) so if you weren't contacted you probably got it in properly. Now we're waiting for the form to see who got top 65 :P

That's good to know!  Thanks  :thumb:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 16:46:10
(Tentative) Eligible PC Forms (4/15/2019, 2:45PM PT)

Please do not PM about order change just yet. All order changes will be done in a time window I will announce.

https://docs.google.com/spreadsheets/d/1eRy06RRbyuFNVcdk5Yd-Xc9iCeAI8TsEQf0gqE-Ieto/edit?usp=sharing

(Tentative) Eligible Aluminum Forms

Please do not PM about order change just yet. All order changes will be done in a time window I will announce.

https://docs.google.com/spreadsheets/d/1NWBsagMHbe663Fju0yP3Jpwzhy9-smMGQ06FjaQfsaw/edit?usp=sharing
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Sic_Alpha on Mon, 15 April 2019, 16:56:14
Thanks!  :thumb:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Mon, 15 April 2019, 16:56:56
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 17:02:55
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: ninjacore on Mon, 15 April 2019, 17:57:33
Sheesh, ~150th and submitted just 3 minutes in haha

Congrats, GB runners!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Mon, 15 April 2019, 18:27:53
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson

No... I submitted as booleanjulien
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: noahf on Mon, 15 April 2019, 18:41:00
im pretty sure i submitted a PC order but its not showing up. oldcat can you confirm mine is or is not there? its under this name
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 20:05:48
im pretty sure i submitted a PC order but its not showing up. oldcat can you confirm mine is or is not there? its under this name

I did see it, looks like you submitted too early and got removed. Please submit another form if you still would like to join this GB

4/14/2019 17:35:29
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: noahf on Mon, 15 April 2019, 20:08:24
woops. i must have thought it was est not pst. sorry about that, resubmitting.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Cameleopard on Mon, 15 April 2019, 21:03:15
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson

Damn, I went by my computer's time and submitted about 5 seconds after 6:50 PT according to it.  A shame to miss out on raffle chances, but it's good to know for sure why my name wasn't in the lists.  I've since resubmitted, looking forward to these boards!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: mgsickler on Mon, 15 April 2019, 21:19:35
In for hopefully 1 aluminum and 1 PC!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Mon, 15 April 2019, 21:27:42
In for hopefully 1 aluminum and 1 PC!

thanks for the support, Mike!
Title: Re: [GB] Think6.5° Dupe Order
Post by: upintheclouds on Mon, 15 April 2019, 21:37:52
I accidentally submitted two responses for PC form (lost track of the first one, and wasn't sure if I had hit submit on PC the night before). Please keep line 186, remove line 251. Thanks!
Title: Re: [GB] Think6.5° Dupe Order
Post by: oldcat on Mon, 15 April 2019, 21:40:21
I accidentally submitted two responses for PC form (lost track of the first one, and wasn't sure if I had hit submit on PC the night before). Please keep line 186, remove line 251. Thanks!

Please let's do that during order change window. In case you are sent 2 invoices just pay one of them.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: baoduy23 on Mon, 15 April 2019, 22:18:30
Join for 1 PC :) hope everything will go well
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: empa on Tue, 16 April 2019, 07:27:02
x 1 PC here! contemplating on getting another
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Tue, 16 April 2019, 13:27:17
Many asked about the lighting, the most updated version:

14 RGB LEDs underglow,
4 rgb LEDs on ESC
3 rgb LEDs above badge (only badge version)

No other lighting sources.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: quitraging on Tue, 16 April 2019, 17:49:55
Many asked about the lighting, the most updated version:

14 RGB LEDs underglow,
4 rgb LEDs on ESC
3 rgb LEDs above badge (only badge version)

No other lighting sources.
Is this all the same on pc, alu and brass?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Tue, 16 April 2019, 17:50:36
Dear all: Thanks for all the DMs and PMs.

Invoices for PC and Alu have not been issued yet, and they will be sent out after order check has completed.

So far we are looking at 150 paid orders from China, excluding full brass, leaving a possible 500 slots for the rest of the world.

In the international GB, we are looking at roughly 370 submissions without deleting possible duplicates. Once the rest of the slots are filled or when 4/30 comes (whichever first), we will start order check for 2 days and send out invoices to all.

Hope this is clear! Thanks for all the support. We have started material procurement for both brass, PC, and Alu, in preparation for production.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Tue, 16 April 2019, 17:52:35
Many asked about the lighting, the most updated version:

14 RGB LEDs underglow,
4 rgb LEDs on ESC
4 rgb LEDs above badge (only badge version)

No other lighting sources.
Is this all the same on pc, alu and brass?

Yes they are all there, with one difference being that on black pc, alu, and brass, the 14 rgb underglows will have no effects as they are under the pcb.
4XRGB and 3 RGB LEDs will always work, please see the demo here for alu version.

(https://i.imgur.com/74Uci7C.jpg)

(https://i.imgur.com/hzF3bAV.jpg)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: BrutalBanana on Tue, 16 April 2019, 22:08:21
Just getting into the hobby from lurking for a while and this will be my first GB. Very excited and looking forward to the final product. Really appreciate the detailed info and communication throughout this process.  :thumb:
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Tue, 16 April 2019, 22:18:36
Some asked about the diffuser in the discord, I figure it is worth more explanations, as it will be very dope. Here is the updated model with 4 RGB LEDs above badge under the silicon diffuser, hope the model is clear enough. Thanks for all the suggestions.

[attachimg=1]
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: coffeeshopcoder on Wed, 17 April 2019, 02:31:19
just got in for a waves green alu apart from my PC.

What color will the alu prototype be ?
Any chance of seeing a render of nautilus nightmares along with the waves green board ?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Wed, 17 April 2019, 06:38:37
What would be the best way to mod this board to get RBG lighting diffused in the top case too?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: davidkoleda on Wed, 17 April 2019, 08:17:01
I have an extremely noob question, but I'm not familiar with hotswaps and would like to know the following:

The kaihua socket hotswap PCB included in this are compatible with any switches? Which type? PCB or plate mount?
(I was interested in installing Zealios)

Inviato dal mio SM-G960F utilizzando Tapatalk

Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: phunktional on Wed, 17 April 2019, 08:32:23
In for frosted PC and Wavez aluminum. So hyped!
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Furikurichemy on Wed, 17 April 2019, 08:36:29
I have an extremely noob question, but I'm not familiar with hotswaps and would like to know the following:

The kaihua socket hotswap PCB included in this are compatible with any switches? Which type? PCB or plate mount?
(I was interested in installing Zealios)

Inviato dal mio SM-G960F utilizzando Tapatalk

Yes, the hotswap PCB will work for any MX style switch (Zealios, kaihl, Gateron, cherry etc). This one is compatible with both plate and pcb mount switches.
In general though, pcb mount switches can be used with any pcb. If the pcb is plate mount only, you just need to cut a couple of the plastic legs on the bottom off, it's a really easy fix.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: Hell-es on Wed, 17 April 2019, 10:21:48
Hi there,
Some noob questions also from my side...

1st) if i order pc und alu - its just 1 shipment cost?

2nd) what kind of stabilizers do i need for the boards - is i‘m a noob i would take hot swap boards, but i think i have to install stabs.

3rd) wanted 1 badge and 2 non badge version, i understand this is just gold ? Wavez alu is not green ? Do i get the extra badge as a paper weight with non-badge board ;) ?

Thanks, bernd
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 10:57:32
just got in for a waves green alu apart from my PC.

What color will the alu prototype be ?
Any chance of seeing a render of nautilus nightmares along with the waves green board ?

We will get a few Alu prototype out next week, including wavez green.

Yes there is a render for nautilus nightmare. Color doesn’t match 100% but still quite close I believe should look great

Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 10:58:36
What would be the best way to mod this board to get RBG lighting diffused in the top case too?

I believe with pc frosted clear top piece will have sufficient light if you keep 4XRGB and the light strip LEDs on
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 11:03:35
Think artisan prototype

[attachimg=1]
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: warmsoda on Wed, 17 April 2019, 11:43:07
X 1 Frosted PC here!

What stabs will I need for the build (size, quantity, etc.)
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: KevlarBear on Wed, 17 April 2019, 11:47:37
X 1 Frosted PC here!

What stabs will I need for the build (size, quantity, etc.)

Depends on your layout. If you get either of the ANSI ones you are going to need a 6.25u and x3 2u stabs
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 11:49:09
X 1 Frosted PC here!

What stabs will I need for the build (size, quantity, etc.)

Do get the pcb screw-in stabs

Novelkeys have the GMK ones that are really good
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 12:24:24
First 10 invoices for full brass issued, please check form: https://docs.google.com/spreadsheets/d/1IzWqGK3syxxaAd8BGyGFQO61wzPBkRcEKvEAtTnfDG0
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 16:56:15
Hi there,
Some noob questions also from my side...

1st) if i order pc und alu - its just 1 shipment cost?

One shipping, based on weight of the total package.

2nd) what kind of stabilizers do i need for the boards - is i‘m a noob i would take hot swap boards, but i think i have to install stabs.

Just buy GMK Screw in Stablizers from here: https://novelkeys.xyz/collections/miscellaneous/products/cherry-stabilizers

3rd) wanted 1 badge and 2 non badge version, i understand this is just gold ? Wavez alu is not green ? Do i get the extra badge as a paper weight with non-badge board ;) ?

Hmm, I am a bit confused by the first question. Wavez Green is a dark green. Somewhere between the Wavez mod and Wavez Alpha. Again I do not understand your third question.

Thanks, bernd
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: KevlarBear on Wed, 17 April 2019, 17:08:40
3rd) wanted 1 badge and 2 non badge version
So you are getting 3 total Think6.5s?

3rd) i understand this is just gold ?
Yes default badge/weight is gold. If you want other colors you have to add them as extras

3rd)  Wavez alu is not green ?
It is green, see sample anno of a wavez green badge

3rd)  Do i get the extra badge as a paper weight with non-badge board ;) ?
No, non-badge layouts will not include the badge, just the weight
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Wed, 17 April 2019, 20:58:13
3rd) wanted 1 badge and 2 non badge version
So you are getting 3 total Think6.5s?

3rd) i understand this is just gold ?
Yes default badge/weight is gold. If you want other colors you have to add them as extras

3rd)  Wavez alu is not green ?
It is green, see sample anno of a wavez green badge

3rd)  Do i get the extra badge as a paper weight with non-badge board ;) ?
No, non-badge layouts will not include the badge, just the weight

Thanks bro!
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: Hell-es on Thu, 18 April 2019, 00:52:21
Thanks for fast answers - bad wording, (layout 1 and 2), planing on 1 pc and 1 alu . Will start with pc and then check if camara gear selling works fine ;) - dont wanna miss alu

Ah, one more question ... with badge version, i have to solder the leds above badge, or are they pre-soldered ?
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: davidkoleda on Thu, 18 April 2019, 04:52:35
I have an extremely noob question, but I'm not familiar with hotswaps and would like to know the following:

The kaihua socket hotswap PCB included in this are compatible with any switches? Which type? PCB or plate mount?
(I was interested in installing Zealios)

Inviato dal mio SM-G960F utilizzando Tapatalk

Yes, the hotswap PCB will work for any MX style switch (Zealios, kaihl, Gateron, cherry etc). This one is compatible with both plate and pcb mount switches.
In general though, pcb mount switches can be used with any pcb. If the pcb is plate mount only, you just need to cut a couple of the plastic legs on the bottom off, it's a really easy fix.

Thanks for your reply, very clear!

I have another question regardding shipping. I'd probably choose SF Express as a shipping method to Italy, being cheaper.
Does somebody (most likely oldcat) know if it is possible to get the shipping delivered at the post office (any in my city would be fine), then I'd go to pick it up? I'm not sure which local postal service will handle the shipping locally, so this is kinda of my doubt at the moment.

Do you think DHL, on the contrary, being an international courier, offers this service in case SF Express doesn't?
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Thu, 18 April 2019, 12:08:48
PC and Alu spreadsheets have been updated

This is the form of all eligible orders without deleting potential duplicated orders.

if you double ordered, please wait till order change period to request cancellation and let us know which one you keep.

Potter's corporate PayPal account registered with his company has been approved. And we will try to do bulk invoicing for PC/Alu.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: booleanjulien on Thu, 18 April 2019, 14:56:31
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson

No... I submitted as booleanjulien

I was a bit disappointed after I was positive that I entered my form in time, only to not see it on the confirmed list, as I knew I wasn't going to get a great raffle spot if I entered again days later. Well, I did enter again yesterday, and my name is still not on the updated list! This time I'm 100% positive my form was submitted and was valid. Any idea what's going on here?
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: Hell-es on Thu, 18 April 2019, 15:00:25
Any experience with SF express to germany?  Still confused about estimated DHL costs... would prefer DHL but hesitate to send the form...
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Thu, 18 April 2019, 15:10:56
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson

No... I submitted as booleanjulien

I was a bit disappointed after I was positive that I entered my form in time, only to not see it on the confirmed list, as I knew I wasn't going to get a great raffle spot if I entered again days later. Well, I did enter again yesterday, and my name is still not on the updated list! This time I'm 100% positive my form was submitted and was valid. Any idea what's going on here?

Perhaps a sorting error. Let me take a closer look.
Title: Re: [GB] Think6.5° (Full Brass Raffle 4/13; PC/Aluminum GB starts 4/14)
Post by: oldcat on Thu, 18 April 2019, 15:14:45
I'm not on the list! Was my entry not eligible somehow?

I originally thought it was at 6:30AM instead of PM, so I submitted one in the morning, but then I submitted another one in the evening at like 6:50PM.

These are the two who submitted 30 seconds too early, are you one of them maybe?

Cameleopard
neal_stephenson

No... I submitted as booleanjulien

I was a bit disappointed after I was positive that I entered my form in time, only to not see it on the confirmed list, as I knew I wasn't going to get a great raffle spot if I entered again days later. Well, I did enter again yesterday, and my name is still not on the updated list! This time I'm 100% positive my form was submitted and was valid. Any idea what's going on here?

Actually I do see your name on the list: https://docs.google.com/spreadsheets/d/1eRy06RRbyuFNVcdk5Yd-Xc9iCeAI8TsEQf0gqE-Ieto/edit?usp=sharing

Row 285
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: booleanjulien on Thu, 18 April 2019, 15:16:34
Oh, weird! I just tried checking before with the build-in search and come up with nothing... well, we good then :)
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Thu, 18 April 2019, 15:20:35
Oh, weird! I just tried checking before with the build-in search and come up with nothing... well, we good then :)

I think it is because when you looked at it, I was sorting how many orders there are for each layout :) We get you covered, don't worry buddy.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: marCH1LLL on Thu, 18 April 2019, 16:26:18
Any experience with SF express to germany?  Still confused about estimated DHL costs... would prefer DHL but hesitate to send the form...

https://de.trustpilot.com/review/sf-express.com

Nimm DHL, dass Paket wird zu 100%(eigene Erfahrung) vom Zoll rausgefischt
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: marCH1LLL on Thu, 18 April 2019, 16:32:47
What is the zip code from where you ship and what is the estimate for weight and size of the package?
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Thu, 18 April 2019, 17:05:37
What is the zip code from where you ship and what is the estimate for weight and size of the package?

Guangzhou, China

PC: budget for 2kg package
Alu: budget for 2.5-3kg package
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Thu, 18 April 2019, 23:21:47
Carbon Bone, just in!

[attachimg=1]
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Thu, 18 April 2019, 23:29:38
the rest of the brass invoices are being sent, please check your email box for the invoice and we appreciate if full brass invoices can be paid promptly.

Aluminum/PC invoices will come later, after order check.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: kucas on Fri, 19 April 2019, 01:31:58


brass weight and brass badge

can i choose anoter color? instead gold
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: cucgach on Fri, 19 April 2019, 05:29:33
When is the window time for pc order change? I would like to update my order. Thanks.


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Fri, 19 April 2019, 11:07:24


brass weight and brass badge

can i choose anoter color? instead gold

For default, it is 18K gold plated PVD. It cannot be modified.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: xkhol on Fri, 19 April 2019, 13:37:51
Is it possible to change my order from aluminum to frosted PC? I ordered under /u/xwork from reddit


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: KevlarBear on Fri, 19 April 2019, 13:41:32
Is it possible to change my order from aluminum to frosted PC? I ordered under /u/xwork from reddit


Sent from my iPhone using Tapatalk

PC and Alu spreadsheets have been updated

This is the form of all eligible orders without deleting potential duplicated orders.

if you double ordered, please wait till order change period to request cancellation and let us know which one you keep.

Potter's corporate PayPal account registered with his company has been approved. And we will try to do bulk invoicing for PC/Alu.

I would suggest putting an order in for PC and then cancelling during cancel/alterations phase
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: danielucf on Fri, 19 April 2019, 15:00:18
Didn't see myself in the list so I put in an order again.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Fri, 19 April 2019, 15:40:30
Didn't see myself in the list so I put in an order again.

Sorry brother the list was up to date till yesterday. Thanks for the support!
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Fri, 19 April 2019, 22:30:36
The PC spreadsheet and the aluminum spreadsheet both updated (4.19 8:30PM Pacific time):

https://docs.google.com/spreadsheets/d/1eRy06RRbyuFNVcdk5Yd-Xc9iCeAI8TsEQf0gqE-Ieto/edit?usp=sharing

https://docs.google.com/spreadsheets/d/1NWBsagMHbe663Fju0yP3Jpwzhy9-smMGQ06FjaQfsaw/edit?usp=sharing
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Sat, 20 April 2019, 00:10:22
When is the window time for pc order change? I would like to update my order. Thanks.


Sent from my iPhone using Tapatalk

Currently we are approaching the quantity limit, so it could come sooner than 4/30. My plan was still to show you guys how alu looks and how alu+pc would look like IRL, as more PC and alu prototypes will be shipped to me imminently.

Plan for 5/1-5/2 for order change (I will send a free form for you to write how you want to change/combine/cancel), and 5/3 invoice will go out in a batch.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: danielucf on Sat, 20 April 2019, 01:26:41
Sorry brother the list was up to date till yesterday. Thanks for the support!

Hmmm apparently I was looking at the polycarb sheet and have a duplicate now. My first order can be removed.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Sat, 20 April 2019, 10:25:19
Sorry brother the list was up to date till yesterday. Thanks for the support!

Hmmm apparently I was looking at the polycarb sheet and have a duplicate now. My first order can be removed.

No worries bro.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: Jurka on Sat, 20 April 2019, 12:11:09
So how is it with the DHL shipping costs? I am from the EU and I have never heard about SF Express. Do they ship to the EU (Czech Republic)? I really want to get a PC non-badge solder beauty.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: coffeeshopcoder on Sat, 20 April 2019, 16:00:54
Has the invoicing for oc and aluminum started ? Or is it only at the end of the gb period? I haven’t seen any invoices yet...
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: empa on Sat, 20 April 2019, 16:07:49
In his last post he reported its likely to start invoicing from 5/3 post change orders
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: oldcat on Sat, 20 April 2019, 22:10:50
Has the invoicing for oc and aluminum started ? Or is it only at the end of the gb period? I haven’t seen any invoices yet...

It will start when we reach the quantity limit or 4/30. Will then provide 2 days order revision window, and then batch invoices will be sent.
Title: Re: [GB] Think6.5° (Full brass invoicing starts; PC/Alu GB ends 4/30)
Post by: coffeeshopcoder on Sat, 20 April 2019, 23:51:48
Has the invoicing for oc and aluminum started ? Or is it only at the end of the gb period? I haven’t seen any invoices yet...

It will start when we reach the quantity limit or 4/30. Will then provide 2 days order revision window, and then batch invoices will be sent.

Thanks !! Looking forward to it !
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: Hell-es on Sun, 21 April 2019, 05:07:36
In for pc with badge - lets see if i can add alu wavez...
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Sun, 21 April 2019, 12:20:13
In for pc with badge - lets see if i can add alu wavez...

:) I have prepared a free form for participants to submit order changes. The form will be released come as the GB ends.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: Moridin on Sun, 21 April 2019, 17:20:31
Submitted. FML.

Really wish I could just not get the brass badge and weight and get the black ones instead. 😉
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 01:53:11
Submitted. FML.

Really wish I could just not get the brass badge and weight and get the black ones instead. 😉

Thanks! Making it standardized will save us a lot of sorting effort :)

By the way, all default gold brass badges and weights will get 18k Gold PVD treatment, will be awesome.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: Moridin on Mon, 22 April 2019, 02:09:19
Submitted. FML.

Really wish I could just not get the brass badge and weight and get the black ones instead. 😉

Thanks! Making it standardized will save us a lot of sorting effort :)

By the way, all default gold brass badges and weights will get 18k Gold PVD treatment, will be awesome.

PC + Black badge is my choice.

Does it really scratch that easily? Do you think a wire keycap puller could leave a mark if I’m not careful?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Mon, 22 April 2019, 07:12:35
how long will you update the raffle form? how can i miss this topic, damm.


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 09:30:08
Submitted. FML.

Really wish I could just not get the brass badge and weight and get the black ones instead. 😉

Thanks! Making it standardized will save us a lot of sorting effort :)

By the way, all default gold brass badges and weights will get 18k Gold PVD treatment, will be awesome.

PC + Black badge is my choice.

Does it really scratch that easily? Do you think a wire keycap puller could leave a mark if I’m not careful?

Minor scratches on the inside when you pull scratches using keycap pulled won’t be visible, if you use sharp items against outside surface it will be visible

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 10:40:27
how long will you update the raffle form? how can i miss this topic, damm.


Sent from my iPhone using Tapatalk

All full brass raffle spots are gone I believe. For the giveaway raffle, all GB participants will be eligible.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Mon, 22 April 2019, 11:15:35
how long will you update the raffle form? how can i miss this topic, damm.


Sent from my iPhone using Tapatalk

All full brass raffle spots are gone I believe. For the giveaway raffle, all GB participants will be eligible.
sorry, i mean the pc and aluminum, i have signed up the form, but i don't see my name on its yet


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 13:09:46
how long will you update the raffle form? how can i miss this topic, damm.


Sent from my iPhone using Tapatalk

All full brass raffle spots are gone I believe. For the giveaway raffle, all GB participants will be eligible.
sorry, i mean the pc and aluminum, i have signed up the form, but i don't see my name on its yet


Sent from my iPhone using Tapatalk

Thanks for the reminder, will work on it after I get out of the meetings.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: Hell-es on Mon, 22 April 2019, 13:42:59
Sad that its not possible to remove the badge and put in the two keys :) would make decisions easier 😎
But even if i would like the two keys... i think the badge just belongs to the design
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: orim23 on Mon, 22 April 2019, 14:19:29
Layout b and d have the two keys and no badge, not ?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Mon, 22 April 2019, 15:11:03
how long will you update the raffle form? how can i miss this topic, damm.


Sent from my iPhone using Tapatalk

All full brass raffle spots are gone I believe. For the giveaway raffle, all GB participants will be eligible.
sorry, i mean the pc and aluminum, i have signed up the form, but i don't see my name on its yet


Sent from my iPhone using Tapatalk

Thanks for the reminder, will work on it after I get out of the meetings.
thanks man


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: ninjacore on Mon, 22 April 2019, 20:34:57
https://photos.app.goo.gl/zvFcfKFMizNfp8qc7

Ugly MS Paint job :) but in case anyone else wanted to see Taro on the Wavez green alu board, this is it-ish
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: empa on Mon, 22 April 2019, 21:10:26
 looks good! always wanted to see what it looks like.
always referred to this photo built by Taeha Types

https://www.toopics.com/p/1989793185565487339_5731458300
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 21:42:09
https://photos.app.goo.gl/zvFcfKFMizNfp8qc7

Ugly MS Paint job :) but in case anyone else wanted to see Taro on the Wavez green alu board, this is it-ish

Wow, looks great, thanks for the picture for Taro lovers!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Mon, 22 April 2019, 22:26:52
can I have a question, I signed up 2 forms, the PC 1 for me and the 1 aluminum for my friend.  I use my information to fill both, but since my friend does not want it, how can I cancel the aluminum form. Thanks
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Mon, 22 April 2019, 22:40:33
can I have a question, I signed up 2 forms, the PC 1 for me and the 1 aluminum for my friend.  I use my information to fill both, but since my friend does not want it, how can I cancel the aluminum form. Thanks

Hi during the order modification period, you can fill out a form to indicate which one you intend to keep.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Mon, 22 April 2019, 23:07:29
can I have a question, I signed up 2 forms, the PC 1 for me and the 1 aluminum for my friend.  I use my information to fill both, but since my friend does not want it, how can I cancel the aluminum form. Thanks

Hi during the order modification period, you can fill out a form to indicate which one you intend to keep.
oh, thank, that help me a lot, and do you update the list for PC group buy yet?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: TuCZnak on Tue, 23 April 2019, 00:19:51
Can we all just applaud oldcat's patience when answering the same questions over and over and over and over and over and over... ;)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: empa on Tue, 23 April 2019, 05:52:51
I agree! credit to oldcat his responses are always prompt and communicates regularly
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Tue, 23 April 2019, 09:42:08
can I have a question, I signed up 2 forms, the PC 1 for me and the 1 aluminum for my friend.  I use my information to fill both, but since my friend does not want it, how can I cancel the aluminum form. Thanks

Hi during the order modification period, you can fill out a form to indicate which one you intend to keep.
oh, thank, that help me a lot, and do you update the list for PC group buy yet?

Hey brother, it has been updated last night.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: stevevu2816 on Tue, 23 April 2019, 10:59:33
can I have a question, I signed up 2 forms, the PC 1 for me and the 1 aluminum for my friend.  I use my information to fill both, but since my friend does not want it, how can I cancel the aluminum form. Thanks

Hi during the order modification period, you can fill out a form to indicate which one you intend to keep.
oh, thank, that help me a lot, and do you update the list for PC group buy yet?

Hey brother, it has been updated last night.
I'm appreciated you so much , now i'm safe for a slot.


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Tue, 23 April 2019, 12:31:09
Can we all just applaud oldcat's patience when answering the same questions over and over and over and over and over and over... ;)

I agree! credit to oldcat his responses are always prompt and communicates regularly

Thanks for the kind words. Trying my best!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: ninjinphu on Tue, 23 April 2019, 16:05:30
This is my first group buy on geekhack! excited for the board to arrive =)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Tue, 23 April 2019, 18:17:13
This is my first group buy on geekhack! excited for the board to arrive =)


Thanks, it will be a few months but I am confident it will be worth the wait!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: cucgach on Wed, 24 April 2019, 00:51:30
check out of curiosity, joined because of oldcat's responsive
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: maximize on Wed, 24 April 2019, 10:17:50
Hey oldcat, are there any spots left? Looks like both PC and aluminum forms are view-only now, but the total is only 468 (not the 500 maximum stated in "Note 2" from Airpotter).
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: kolyz on Wed, 24 April 2019, 10:28:07
Hey oldcat, are there any spots left? Looks like both PC and aluminum forms are view only now, but the total is only 470 (not the 500 stated in "Note 2" from Airpotter).
These are the GB forms that you need to fill out, not the excel sheets:
alu - https://docs.google.com/forms/d/1VdI2czaCw4di53ntalcvGMlHlJaqR949d0QDGedKqyo/
pc - https://docs.google.com/forms/d/1g47x4puu_xyECA1WHyrnbacP7MBZ9OHq-VtDV8z2_NA/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Wed, 24 April 2019, 10:33:58
Hey oldcat, are there any spots left? Looks like both PC and aluminum forms are view-only now, but the total is only 468 (not the 500 maximum stated in "Note 2" from Airpotter).

We are at 490 without deleting possible duplicate forms
I will keep the form open till 4/30, with a maximum of 500 spots. Later joiners can be placed on the waitlist for non-paid spots.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: ninjinphu on Wed, 24 April 2019, 16:25:51
This is my first group buy on geekhack! excited for the board to arrive =)


Thanks, it will be a few months but I am confident it will be worth the wait!

No worries I'm already used to waiting a few months. I've preemptively purchased switches and caps in other GB's that will arrive within similar time frames (assuming everything runs on time lol). Thanks for running this GB
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (Ends 4/30, Order Check 5/1-5/2)
Post by: oldcat on Wed, 24 April 2019, 21:31:31
we are at 494 now, we will start order check when 500 is reached, and later joiners can be put on a waitlist if there are canceled orders
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: Aznguyen316 on Wed, 24 April 2019, 23:17:08
Nice. I might switch to compatible with additional hotswap pcb when order check comes in.  Prefer split backspace.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: oldcat on Thu, 25 April 2019, 11:57:26
Nice. I might switch to compatible with additional hotswap pcb when order check comes in.  Prefer split backspace.

No worries, the order check form should go up soon. Thanks for the support!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: Frostbyte on Thu, 25 April 2019, 12:06:15
Just decided to check for fun and it looks like 1 more order spot! Who's going to be the lucky one? :O
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: oldcat on Thu, 25 April 2019, 14:22:59
Aluminum prototypes are out and I should be able to receive them on Monday if the courier works as it should. I will be receiving 4 different top pieces (different layouts), and 2 bottoms (same).

Here are a couple of cellphone pictures taken by Potter last night. Lighting is a bit weird so the color may not be 100% accurate. I will take some pictures with accurate exposures and white balance when I receive the prototype. Here is a sneak peek for Wavez green.


(https://i.imgur.com/LdFIeFn.jpg)

(https://i.imgur.com/iA2hCTt.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: kolyz on Thu, 25 April 2019, 14:42:32
oof! very nice.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: oldcat on Thu, 25 April 2019, 17:04:28
oof! very nice.

Thanks! It's a solid solarized dark color :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: ninjacore on Thu, 25 April 2019, 17:08:37
Which color is that?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: oldcat on Thu, 25 April 2019, 19:06:30
Which color is that?

The pics shared above? It is Wavez green.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (approaching limit, order check soon)
Post by: oldcat on Thu, 25 April 2019, 19:26:46
Order modification starts now till end of day Saturday:

https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/edit?usp=sharing

Submit an order modification request here: https://docs.google.com/forms/d/17gV584N-10I6C44J9FmjN8mLYMNsst1Mnv6roCC5vyU/

Form will be open till April 30 end of day. Late joiners will be added to the order spreadsheet, or waitlisted if more than 500 valid orders are received.

We will prepare Excel form for invoicing this Sunday

We will send invoices starting Sunday, payment will be due in 7 days of the invoice date.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Aznguyen316 on Thu, 25 April 2019, 21:08:47
edited my order, thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 03:04:26
edited my order, thanks!

Did you edit the original form or submitted a order change request form? Hope it’s the latter!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: kiandelmundo on Fri, 26 April 2019, 05:48:46
Just filled out an order sheet for a pc version lol am i too late or is it still open?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Bhk1004 on Fri, 26 April 2019, 06:57:30
Just filled out an order sheet for a pc version lol am i too late or is it still open?

Itll be open till 30th.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Zurg Eon on Fri, 26 April 2019, 08:48:22
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 11:13:47
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?

Compatible does not support hotswap PCB. It will be a compatible soldering PCB.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 11:14:59
A few images if you mix and match PC + alu or alu + pc

(https://i.imgur.com/XwMgkpQ.jpg)

(https://i.imgur.com/pHiPcUO.jpg)

(https://i.imgur.com/zxrksez.jpg)

(https://i.imgur.com/85nhkyx.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Aznguyen316 on Fri, 26 April 2019, 12:33:07
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?

Compatible does not support hotswap PCB. It will be a compatible soldering PCB.

Oh weird, several people have compatible layout option and then are ordering an extra Hotswap PCB on the order list.  I actually just changed mine last night to this set up. 

How do I make a change to my change lol

*edit* I can edit my response via the email I got last night, so I'll do that now.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: cygnus21 on Fri, 26 April 2019, 14:02:34
I filled out a form last night and dont see my name on the spreadsheet. I dont want to end up double ordering. Should I fill it out again?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Zurg Eon on Fri, 26 April 2019, 14:38:28
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?

Compatible does not support hotswap PCB. It will be a compatible soldering PCB.

Oh weird, several people have compatible layout option and then are ordering an extra Hotswap PCB on the order list.  I actually just changed mine last night to this set up. 

How do I make a change to my change lol

*edit* I can edit my response via the email I got last night, so I'll do that now.
This was my thinking as well. Guess I'll change to ANSI with an extra solder PCB then. Are those who have this setup (compatible with extra hotswap PCP) not aware it's not compatible?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 14:57:14
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?

Compatible does not support hotswap PCB. It will be a compatible soldering PCB.

Oh weird, several people have compatible layout option and then are ordering an extra Hotswap PCB on the order list.  I actually just changed mine last night to this set up. 

How do I make a change to my change lol

*edit* I can edit my response via the email I got last night, so I'll do that now.

In theory you could use hotswap (ansi) on compatible, but it won’t allow you to do compatible layout. Hotswap is ANSI fixed layout only
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 15:14:30
Does compatible integrated plate support hotswap PCB? Or will backspace, enter and shift switches not be secure enough?

Compatible does not support hotswap PCB. It will be a compatible soldering PCB.

Oh weird, several people have compatible layout option and then are ordering an extra Hotswap PCB on the order list.  I actually just changed mine last night to this set up. 

How do I make a change to my change lol

*edit* I can edit my response via the email I got last night, so I'll do that now.
This was my thinking as well. Guess I'll change to ANSI with an extra solder PCB then. Are those who have this setup (compatible with extra hotswap PCP) not aware it's not compatible?

Correct, the hotswap pcb does not have a compatible version.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 15:26:34
I filled out a form last night and dont see my name on the spreadsheet. I dont want to end up double ordering. Should I fill it out again?

I just updated it. Thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: cygnus21 on Fri, 26 April 2019, 16:00:30
I filled out a form last night and dont see my name on the spreadsheet. I dont want to end up double ordering. Should I fill it out again?

I just updated it. Thanks!

Awesome, Thank you
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: steamykeebs on Fri, 26 April 2019, 16:18:51
A few images if you mix and match PC + alu or alu + pc

Show Image
(https://i.imgur.com/XwMgkpQ.jpg)


Show Image
(https://i.imgur.com/pHiPcUO.jpg)


Show Image
(https://i.imgur.com/zxrksez.jpg)


Show Image
(https://i.imgur.com/85nhkyx.jpg)


Really wish there was a way to do this without ordering 2 keyboards.  This is my preferred setup.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 16:39:59
A few images if you mix and match PC + alu or alu + pc

Show Image
(https://i.imgur.com/XwMgkpQ.jpg)


Show Image
(https://i.imgur.com/pHiPcUO.jpg)


Show Image
(https://i.imgur.com/zxrksez.jpg)


Show Image
(https://i.imgur.com/85nhkyx.jpg)


Really wish there was a way to do this without ordering 2 keyboards.  This is my preferred setup.

Sorry brother, it would require a bit too much work for manufacturing and sorting. Hope you understand.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: gl0w on Fri, 26 April 2019, 19:02:28
Is the spreadsheet for the order modifications updated to any changes? I ask this because I modified my order, but I didn't see any changes on the spreadsheet. I am worried I may have filled it out incorrectly.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 21:23:02
Better raffle re additional pc badge giveaway:

6.5% of all orders will receive a clear pc badge for free. Raffle only.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Fri, 26 April 2019, 23:38:02
Is the spreadsheet for the order modifications updated to any changes? I ask this because I modified my order, but I didn't see any changes on the spreadsheet. I am worried I may have filled it out incorrectly.

hey brother, I will wait till the end of day Saturday to start batch processing it. Please do not worry :) You can actually view your submitted modification request :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Hell-es on Sat, 27 April 2019, 08:45:01
Really sad that it isn‘t possible to order tops separately... that alu wavez really has me... but can‘t afford a second keyboard.

Round 2 for christmas ;) ?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: AIRPOTTER on Sat, 27 April 2019, 11:57:03
thank you everyone for the support, the GB will end on April 30, and we will start the invoicing on Sunday.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: steamykeebs on Sat, 27 April 2019, 12:59:40
A few images if you mix and match PC + alu or alu + pc

Show Image
(https://i.imgur.com/XwMgkpQ.jpg)


Show Image
(https://i.imgur.com/pHiPcUO.jpg)


Show Image
(https://i.imgur.com/zxrksez.jpg)


Show Image
(https://i.imgur.com/85nhkyx.jpg)


Really wish there was a way to do this without ordering 2 keyboards.  This is my preferred setup.

Sorry brother, it would require a bit too much work for manufacturing and sorting. Hope you understand.

Yeah, I totally get it.  This is shaping up to be a very large GB so I can only imagine the work involved to get everything sorted and shipped.  Can't blame you for not wanting to add extra work for a handful of people especially since you already work really hard for this community across several GBs.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: Hell-es on Sat, 27 April 2019, 14:17:35
A few images if you mix and match PC + alu or alu + pc

Show Image
(https://i.imgur.com/XwMgkpQ.jpg)


Show Image
(https://i.imgur.com/pHiPcUO.jpg)


Show Image
(https://i.imgur.com/zxrksez.jpg)


Show Image
(https://i.imgur.com/85nhkyx.jpg)


Really wish there was a way to do this without ordering 2 keyboards.  This is my preferred setup.

Sorry brother, it would require a bit too much work for manufacturing and sorting. Hope you understand.

Yeah, I totally get it.  This is shaping up to be a very large GB so I can only imagine the work involved to get everything sorted and shipped.  Can't blame you for not wanting to add extra work for a handful of people especially since you already work really hard for this community across several GBs.

Same here - but  big big  :thumb: :thumb: for handling this huge GB and all the good communication
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (order check and modification 4/25 - 4/27)
Post by: oldcat on Sat, 27 April 2019, 20:43:13
A few images if you mix and match PC + alu or alu + pc

Show Image
(https://i.imgur.com/XwMgkpQ.jpg)


Show Image
(https://i.imgur.com/pHiPcUO.jpg)


Show Image
(https://i.imgur.com/zxrksez.jpg)


Show Image
(https://i.imgur.com/85nhkyx.jpg)


Really wish there was a way to do this without ordering 2 keyboards.  This is my preferred setup.

Sorry brother, it would require a bit too much work for manufacturing and sorting. Hope you understand.

Yeah, I totally get it.  This is shaping up to be a very large GB so I can only imagine the work involved to get everything sorted and shipped.  Can't blame you for not wanting to add extra work for a handful of people especially since you already work really hard for this community across several GBs.

Thanks for your understanding. As this is my own GB, I really want to keep the timeline. No one likes delays!
Also, all those other GBs I helped pro bono. I’m not going to make a profit out of this GB either.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: oldcat on Sat, 27 April 2019, 20:46:45
More SA profile pictures:

[attachimg=1]

[attachimg=2]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: roshinichi on Sun, 28 April 2019, 01:08:14
I registered an account just for this thread!
I'm in
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: oldcat on Sun, 28 April 2019, 03:44:36
I registered an account just for this thread!
I'm in

Thanks brother! Much appreciated.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: oldcat on Sun, 28 April 2019, 03:47:38
All current orders' changes have been made and all the entries that requested cancellation have been removed from the spreadsheet.
https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/

We will finalize an automated excel sheet and start invoicing. From now on, later joiners will be placed on a waitlist for unpaid orders. Also, we have updated the giveaway raffle for GB participants to include many PC badges, in addition to existing raffles.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: stevevu2816 on Sun, 28 April 2019, 08:03:28
All current orders' changes have been made and all the entries that requested cancellation have been removed from the spreadsheet.
https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/

We will finalize an automated excel sheet and start invoicing. From now on, later joiners will be placed on a waitlist for unpaid orders. Also, we have updated the giveaway raffle for GB participants to include many PC badges, in addition to existing raffles.
my submission for the modification seem has not changed, this is the form that i submitted last time (https://uploads.tapatalk-cdn.com/20190428/b7750de1199b6119773910f0511a75b6.jpg)
but still be same in the sheet above


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: shuangmu on Sun, 28 April 2019, 09:56:56
老猫,NICE !
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Sun, 28 April 2019, 11:48:19
New order spreadsheet has been updated: https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk

If you have questions you can hold off paying and get peer support in discord or dm me in discord. To ensure consistency across multiple internal forms, further modifications will not be accommodated unless we made errors. Thank you.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ending 4/30)
Post by: oldcat on Sun, 28 April 2019, 11:50:38
All current orders' changes have been made and all the entries that requested cancellation have been removed from the spreadsheet.
https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/

We will finalize an automated excel sheet and start invoicing. From now on, later joiners will be placed on a waitlist for unpaid orders. Also, we have updated the giveaway raffle for GB participants to include many PC badges, in addition to existing raffles.
my submission for the modification seem has not changed, this is the form that i submitted last time
Show Image
(https://uploads.tapatalk-cdn.com/20190428/b7750de1199b6119773910f0511a75b6.jpg)

but still be same in the sheet above


Sent from my iPhone using Tapatalk

I think I did make those changes you requested, please kindly check the spreadsheet. Your updated order numbers seem incorrect. I used the ones with your username.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: tunadesu on Sun, 28 April 2019, 12:47:40
Order spreadsheet has been updated: https://docs.google.com/spreadsheets/d/1zmF6HLHd0QEJ8iK1UtDxb8JE87odjbExX-Z0H9-WpJg/



I think this is the wrong link! haha.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: stevevu2816 on Sun, 28 April 2019, 13:02:18
All current orders' changes have been made and all the entries that requested cancellation have been removed from the spreadsheet.
https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/

We will finalize an automated excel sheet and start invoicing. From now on, later joiners will be placed on a waitlist for unpaid orders. Also, we have updated the giveaway raffle for GB participants to include many PC badges, in addition to existing raffles.
my submission for the modification seem has not changed, this is the form that i submitted last time
Show Image
(https://uploads.tapatalk-cdn.com/20190428/b7750de1199b6119773910f0511a75b6.jpg)

but still be same in the sheet above


Sent from my iPhone using Tapatalk

I think I did make those changes you requested, please kindly check the spreadsheet. Your updated order numbers seem incorrect. I used the ones with your username.
i use the newest link that you post for modification form, hmm, can i resubmitting it??


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Sun, 28 April 2019, 15:02:07
All current orders' changes have been made and all the entries that requested cancellation have been removed from the spreadsheet.
https://docs.google.com/spreadsheets/d/1lWL9NhzX60TitIBWhYw9xZvKncZJd80CJ0XnSDy0Ei0/

We will finalize an automated excel sheet and start invoicing. From now on, later joiners will be placed on a waitlist for unpaid orders. Also, we have updated the giveaway raffle for GB participants to include many PC badges, in addition to existing raffles.
my submission for the modification seem has not changed, this is the form that i submitted last time
Show Image
(https://uploads.tapatalk-cdn.com/20190428/b7750de1199b6119773910f0511a75b6.jpg)

but still be same in the sheet above


Sent from my iPhone using Tapatalk

I think I did make those changes you requested, please kindly check the spreadsheet. Your updated order numbers seem incorrect. I used the ones with your username.
i use the newest link that you post for modification form, hmm, can i resubmitting it??


Sent from my iPhone using Tapatalk

please dm me in discord. I will see what I can do. Thank you
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Sun, 28 April 2019, 15:03:02
New order status sheet: old one has an error about alu badge pricing

https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: AIRPOTTER on Sun, 28 April 2019, 22:45:22
I will start issuing invoices today. thank you for the patience. if you have questions regarding payments, please either reply here, or join gray studio for information and support: https://discord.gg/n3rtEpY
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Mon, 29 April 2019, 11:28:13
Roughly 100 invoices sent from PayPal: 462911051@QQ.com

Hope to send the rest  in 2 days
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Mon, 29 April 2019, 12:20:54
Updated PCB model with 14 underglow RGB leds, 4XRGB LEDs on ESC, 4 RGB LEDs above badge under the light diffuser (only badge version)

(https://i.imgur.com/k5r1phM.png)

(https://i.imgur.com/8N0hM3X.png)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: orim23 on Mon, 29 April 2019, 15:44:35
got the invoice. But I'm confused about the note:

"Please check Geekhack page for the order summary spreadsheet, the invoice reference number is your order number in the spreadsheet."

My OrderId on the Order Track Sheet is 282, but invoice reference number is 0052. So what now ? Waiting with paying until I'm sure I'm paying for my board.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Mon, 29 April 2019, 15:54:55
got the invoice. But I'm confused about the note:

"Please check Geekhack page for the order summary spreadsheet, the invoice reference number is your order number in the spreadsheet."

My OrderId on the Order Track Sheet is 282, but invoice reference number is 0052. So what now ? Waiting with paying until I'm sure I'm paying for my board.

Potter forgot to put in the order reference number in for the first 100 orders to the invoice reference cell. Invoice number != order number (which is used for raffle purpose). It is safe to pay as all information has been tracked in the internal sheet, which will be sync'd to the public sheet later after removing PII.

If you have other concerns please feel free to reach out in discord.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: orim23 on Mon, 29 April 2019, 16:48:58
got the invoice. But I'm confused about the note:

"Please check Geekhack page for the order summary spreadsheet, the invoice reference number is your order number in the spreadsheet."

My OrderId on the Order Track Sheet is 282, but invoice reference number is 0052. So what now ? Waiting with paying until I'm sure I'm paying for my board.

Potter forgot to put in the order reference number in for the first 100 orders to the invoice reference cell. Invoice number != order number (which is used for raffle purpose). It is safe to pay as all information has been tracked in the internal sheet, which will be sync'd to the public sheet later after removing PII.

If you have other concerns please feel free to reach out in discord.
Thanks. Paid. Now to the waiting game.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Mon, 29 April 2019, 17:11:14
got the invoice. But I'm confused about the note:

"Please check Geekhack page for the order summary spreadsheet, the invoice reference number is your order number in the spreadsheet."

My OrderId on the Order Track Sheet is 282, but invoice reference number is 0052. So what now ? Waiting with paying until I'm sure I'm paying for my board.

Potter forgot to put in the order reference number in for the first 100 orders to the invoice reference cell. Invoice number != order number (which is used for raffle purpose). It is safe to pay as all information has been tracked in the internal sheet, which will be sync'd to the public sheet later after removing PII.

If you have other concerns please feel free to reach out in discord.
Thanks. Paid. Now to the waiting game.

I will spend the maximum time I could on the GB, so you guys can wait less!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoice soon)
Post by: oldcat on Mon, 29 April 2019, 21:37:53
Yesterday's invoices (~100) where sent from: 462911051@qq.com, this is Potter's personal paypal

Today you will receive invoices from: info@wonwar.net, this is Potter's corporate paypal; or 871138172@qq.com (personal PayPal 2)

Again, if you have questions regarding payment, please touch base in discord: https://discord.gg/n3rtEpY
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: danielucf on Tue, 30 April 2019, 09:20:00
I have orders 350 and 415. I have an invoice for 350 which I intend to pay, but 415 is a duplicate. Was the payment deadline specified somewhere? Is it simply "7 days after the invoice date" ?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: oldcat on Tue, 30 April 2019, 10:31:12
I have orders 350 and 415. I have an invoice for 350 which I intend to pay, but 415 is a duplicate. Was the payment deadline specified somewhere? Is it simply "7 days after the invoice date" ?

You can just leave 416 alone and not pay it when you receive the invoice for 415. Just pay for the one you plan to keep.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: oldcat on Tue, 30 April 2019, 12:21:25
Today is the last day to fill out the order forms. And waitlisted entries have been updated. As there are probably 5% duplicates as well as some cancellations, there are probably still slots open. Invoices are still trickling out. Thank you for the patience.

https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk/

And most importantly, I will receive the aluminum prototypes this afternoon! On UPS truck now.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: wukong_bot on Tue, 30 April 2019, 14:43:34
Hey I filled out the form late last night. Any chance I'll make it on the order list or am I going on the wait list?

Sent from my ONEPLUS A6013 using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: eyedrop on Tue, 30 April 2019, 14:53:48
It is too late to make modification, right?

I was waiting for you to get the alu prototype to see how the wavez green looks in different lighting.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: oldcat on Tue, 30 April 2019, 15:39:11
It is too late to make modification, right?

I was waiting for you to get the alu prototype to see how the wavez green looks in different lighting.

(im)patiently waiting for the UPS truck to stop by, on the UPS map it shows its like within 1 block driving around.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: oldcat on Tue, 30 April 2019, 20:26:36
Some prototype images (wavez green matched with PC), other colors coming later, it's been a busy day...

(https://i.imgur.com/PxWeCOv.jpg)

(https://i.imgur.com/LWuTIJw.jpg)

(https://i.imgur.com/RvaXZ82.jpg)

(https://i.imgur.com/LTe4crB.jpg)

(https://i.imgur.com/QQbcvGJ.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ends 4/30, sheet updated, invoices out)
Post by: oldcat on Wed, 01 May 2019, 02:29:49
Roughly 3/4 invoices have been issued from the following 3 PayPal emails:

462911051@qq.com (personal PayPal)
871138172@qq.com (personal PayPal 2)
info@wonwar.net (corporate PayPal)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 01 May 2019, 13:29:33
Thanks everyone for supporting Think6.5! A few updates:

1. 85% of the invoices sent (as long as the invoice is sent from one of the 3 emails specified in Potter's first post, it is legitimate, please check the email that sent the invoice before paying, any payment questions please reply here or ask in discord)! We will start think6.5 production as soon as payments are collected. I believe payment deadline has been specified in the invoice. If you need to pay a bit later please make an arrangement with us (DM in discord.)

2. Waitlisted orders will be organized later.

3. Live streamed GB raffle giveaway soon after GB payment is done and all valid orders established. LOTS of giveaways!

4. Production updates will be provided in Gray Discord and Geekhack. If you would like to see daily updates or just hang out, join the gray discord :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Sic_Alpha on Wed, 01 May 2019, 13:41:15
Do we have to be present on the Live-Stream for the raffle?  I have some work travel starting tomorrow and I'd hate to miss out.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: AlcoholEnthusiast on Wed, 01 May 2019, 13:50:18
Paid and in!

If we are part of #teamnoblocker and win badges - how does that work? Do we still get them?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: tunadesu on Wed, 01 May 2019, 14:04:44
Maybe I should wait til all the invoices are out, but I was in the first 65 orders and have no invoice yet. Checked spam too
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 01 May 2019, 15:26:47
Maybe I should wait til all the invoices are out, but I was in the first 65 orders and have no invoice yet. Checked spam too

Potter said he invoiced based on the order amount, orders with same amounts are sent out together. Thanks for the patience!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 01 May 2019, 15:27:41
Paid and in!

If we are part of #teamnoblocker and win badges - how does that work? Do we still get them?

If you win and do not want the badges, let us know and we can refund you the amounts!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Bhk1004 on Wed, 01 May 2019, 16:46:11
Paid and in!

If we are part of #teamnoblocker and win badges - how does that work? Do we still get them?

desktop ornaments. There are actually some that have purchased badges just for decorations with no badge keeb.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 01 May 2019, 20:26:48
Do we have to be present on the Live-Stream for the raffle?  I have some work travel starting tomorrow and I'd hate to miss out.

Hey no need to be present. The streaming video will be recorded and shared.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: FinalEleven on Thu, 02 May 2019, 05:14:15
Just paid!

This is gonna be my first keeb group buy so I'm pretty excited about it.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: whinmeister on Thu, 02 May 2019, 10:33:25
Just paid!

This is gonna be my first keeb group buy so I'm pretty excited about it.

Same! I was lucky to have been at the top of the wait list and surprisingly received an invoice this morning. Paid it instantly lol!

And on a side note, I finally received my activation email after several days.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: tunadesu on Thu, 02 May 2019, 13:10:45
Hey, just for quick re-assurance. I think it was addressed earlier in the thread, but I ordered 1 board, got 2 identical invoices 482 and 485. So I can pay whichever one and leave the other alone and be fine?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Thu, 02 May 2019, 21:44:18
Hello friends, I am in Boston on a business trip until Saturday evening. If I do not respond to you before then, please understand that I am probably unable to. Processing PMs now in hotel. Invoices should be all out now, and if you have questions about the payments, please pm me in discord (fastest), or pm in geekhack (a bit slower), or join the discussion in discord.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Thu, 02 May 2019, 21:45:07
Hey, just for quick re-assurance. I think it was addressed earlier in the thread, but I ordered 1 board, got 2 identical invoices 482 and 485. So I can pay whichever one and leave the other alone and be fine?

Yes please check the spreadsheet, if you just want one you need just pay for the one you want to keep.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: kzlow on Fri, 03 May 2019, 13:51:30
Hi I got the invoice, but I would like to change from ANSI badgeless hotswap to ANSI badge hotswap. May i know how can i do it?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Fri, 03 May 2019, 15:34:45
Hi I got the invoice, but I would like to change from ANSI badgeless hotswap to ANSI badge hotswap. May i know how can i do it?

Hey, the order change period has ended. Will make an exception for ya. Could you send me a dm in discord or geekhack about specific details (your order number according to the spreadsheet, and details of the change).
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: kolyz on Fri, 03 May 2019, 18:33:01
Hi I got the invoice, but I would like to change from ANSI badgeless hotswap to ANSI badge hotswap. May i know how can i do it?

Hey, the order change period has ended. Will make an exception for ya. Could you send me a dm in discord or geekhack about specific details (your order number according to the spreadsheet, and details of the change).
oldcat being the mvp as always  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sat, 04 May 2019, 14:54:56
Hi I got the invoice, but I would like to change from ANSI badgeless hotswap to ANSI badge hotswap. May i know how can i do it?

Hey, the order change period has ended. Will make an exception for ya. Could you send me a dm in discord or geekhack about specific details (your order number according to the spreadsheet, and details of the change).
oldcat being the mvp as always  :thumb:

Thanks for the kind words. Just landed in PHX and will try to update the spreadsheet as soon as I talk to airpotter
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sun, 05 May 2019, 02:51:29
Our second version of the PCB proto has completed. Here is a sample of the white solder mask, black trace colorway (production version will have all the RGB LEDs pre-soldered) and all the traces/prints will be clear.

(https://i.imgur.com/vwtp00Q.jpg)

(https://i.imgur.com/lNqka3H.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: HAYAN on Sun, 05 May 2019, 06:51:32
Is the payment deadline is 10th May?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: phunktional on Sun, 05 May 2019, 10:29:35
Is the payment deadline is 10th May?
Invoices went out in batches and I believe it should say on each invoice when it is due.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sun, 05 May 2019, 12:33:36
Rgb LEDs on:

[attachimg=1]

[attachimg=2]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: orim23 on Sun, 05 May 2019, 13:32:04
Is the order track sheet up to date?

I paid my invoice on april 29th, my paypal shows it as paid. In the order track sheet it shows it as invoiced.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sun, 05 May 2019, 16:56:37
Is the order track sheet up to date?

I paid my invoice on april 29th, my paypal shows it as paid. In the order track sheet it shows it as invoiced.

The spreadsheet should be up to date May 3. Will check with potter. If PayPal shows paid then there is nothing to worry. Could you DM me your username, orderID?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Mon, 06 May 2019, 18:55:44
Think6.5, Update Log:

5-6-2019:

Full brass: final design file has been shipped to the factory.
PC/alu: all paypal invoices issued. Once payment is collected, we will confirm the final design and the production will start.
PCB: hotswap: second version (final) design is completed. We will make yet another 1-2 colors and make a final decision of the colorway soon.
        Compatible: prototype design is finished and sent to factory
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Jaycob_Creighton on Mon, 06 May 2019, 19:33:19
Think6.5, Update Log:

5-6-2019:

Full brass: final design file has been shipped to the factory.
PC/alu: all paypal invoices issued. Once payment is collected, we will confirm the final design and the production will start.
PCB: hotswap: second version (final) design is completed. We will make yet another 1-2 colors and make a final decision of the colorway soon.
        Compatible: prototype design is finished and sent to factory
Nice

Sent from my ONEPLUS A5010 using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: linktolink on Mon, 06 May 2019, 19:55:52
I recently placed an order for the Think 6.5 PC version. Given that I've submitted it late I know I will be placed on the waitlist. But how will I know if my order has been accepted? Do I just check the order excel sheet or wait to see if I get sent an invoice? Thanks! :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Tue, 07 May 2019, 10:28:24
I recently placed an order for the Think 6.5 PC version. Given that I've submitted it late I know I will be placed on the waitlist. But how will I know if my order has been accepted? Do I just check the order excel sheet or wait to see if I get sent an invoice? Thanks! :)

You should be receiving an invoice, and the spreadsheet has been updated!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Thu, 09 May 2019, 22:42:12
Paint the lightbulb for black PC and Alu version:

(https://i.imgur.com/PYQA7zR.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: keysRus on Sat, 11 May 2019, 08:11:20
Paid my invoice the second I received, but I dont see it updated as far as I know. Just thought i'd bring it up. Hype!! (Invoice 0030)
Title: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: kanki0213 on Sat, 11 May 2019, 10:28:10
Just paid!

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sun, 12 May 2019, 10:43:01
Paid my invoice the second I received, but I dont see it updated as far as I know. Just thought i'd bring it up. Hype!! (Invoice 0030)

Don’t worry, we will do a final check before cancelling all unpaid invoices next week and mark all paid invoices as well.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: DeadlyPoison on Sun, 12 May 2019, 11:10:17
The Raffle time is coming  8)
Good luck to all participants.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Bhk1004 on Sun, 12 May 2019, 12:38:19
The Raffle time is coming  8)
Good luck to all participants.

yess... good luck to all... but extra luck to me!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: orangesoh on Mon, 13 May 2019, 03:20:38
when is the result of the raffle out?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Mon, 13 May 2019, 16:46:27
when is the result of the raffle out?

On the road now and will be back 5/22, we will finalize the payment status spreadsheet soon, and raffle will be held after I come back.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: spyruf on Sun, 19 May 2019, 16:12:54
Decided to change my mind. I’d like to transfer my spot.
Winkey, black polycarb, hotswap pcb, with badge (layout a)

Pm me here or on discord if you’re interested.
Spyruf#5870
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Moridin on Mon, 20 May 2019, 04:16:00
Decided to change my mind. I’d like to transfer my spot.
Winkey, black polycarb, hotswap pcb, with badge (layout a)

Pm me here or on discord if you’re interested.
Spyruf#5870

No transfers AFAIK. You can sell it on after you get it. Oldcat can correct me if I'm wrong.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Aznguyen316 on Mon, 20 May 2019, 07:46:22
Decided to change my mind. I’d like to transfer my spot.
Winkey, black polycarb, hotswap pcb, with badge (layout a)

Pm me here or on discord if you’re interested.
Spyruf#5870

No transfers AFAIK. You can sell it on after you get it. Oldcat can correct me if I'm wrong.

Yeah, on discord Oldcat said no transfers
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: phunktional on Mon, 20 May 2019, 08:31:37
Decided to change my mind. I’d like to transfer my spot.
Winkey, black polycarb, hotswap pcb, with badge (layout a)

Pm me here or on discord if you’re interested.
Spyruf#5870

No transfers AFAIK. You can sell it on after you get it. Oldcat can correct me if I'm wrong.

Yeah, on discord Oldcat said no transfers

I'm also fairly certain it was in the purchase agreement.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 22 May 2019, 17:32:08
Decided to change my mind. I’d like to transfer my spot.
Winkey, black polycarb, hotswap pcb, with badge (layout a)

Pm me here or on discord if you’re interested.
Spyruf#5870

Yeah as other said pls wait till you receive the board to sell after market. There will be no spot transfers.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Wed, 22 May 2019, 17:34:57
Driving back from LA to Phx today. Huge rain and will likely be 11pm when I get home.

Will update the spreadsheet payment status soon, all paid invoices have been internally  finalized unpaid invoices are cancelled.

Raffles for participants soon as well.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Thu, 23 May 2019, 21:00:12
Update:

Material for pc/Alu purchased. Payment finalized.

Compatible pcb sample out (in a different colorway)

Pcb final colorway will be between white-black and white-green. Will decide based on Geekhack and discord feedback

[attachimg=1]

[attachimg=2]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: MOON on Thu, 23 May 2019, 21:59:34
White and Black please!

Much cleaner  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: coffeeshopcoder on Thu, 23 May 2019, 22:57:19
Black please - maybe some gold/copper ... would be nice on the poly , good backdrop for the weight ...
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Moridin on Fri, 24 May 2019, 02:09:45
White/black.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: ProlificPanda on Fri, 24 May 2019, 20:08:30
You guys are crazy; White/Green all day.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Bhk1004 on Fri, 24 May 2019, 20:15:12
White green. Do something different.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: PotatoTM on Fri, 24 May 2019, 20:33:03
I prefer white/black but white/mint is pretty cool looking too
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: Sic_Alpha on Fri, 24 May 2019, 21:24:20
What happened to White & Gold traces?  Isn't that what the IC form resulted in?  I haven't been checking in a while, might have missed something.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (invoicing)
Post by: oldcat on Sat, 25 May 2019, 00:50:20
What happened to White & Gold traces?  Isn't that what the IC form resulted in?  I haven't been checking in a while, might have missed something.

Still being considered. Yellow does not look good in another pcb demo is developing. Gold was never an option actually, it was white-yellow :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: AlcoholEnthusiast on Sat, 25 May 2019, 12:08:49
White with black traces would be a nice understated look imo. Or white with bronze if that is possible.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: coffeeshopcoder on Sat, 25 May 2019, 18:45:30
If you imagine the polycarbonate version, a matte black pcb with some contrasting colors would be nice. Gold/ Copper would be classy, red might be nice too...
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Sat, 25 May 2019, 19:25:01
Shipped a think6.5 prototype with polycarb top and solarized dark (wavez green) bottom to Voxkey and BHK, built with retooled blacks and GMK calm depth keycaps and midnight blue alu badge, raw brass weight (not pvd'd yet). It is fully functional, though the production version will have a few improvements.

Voxkey and BHK will bring it to the keycon in NYC! Please check it out if you will be at Keycon this year :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: add1ct3dd on Mon, 27 May 2019, 07:17:50
Big vote for white pcb with black/gold/brass coloured traces.

Green is a bit of a meh colour for me.

Or alternatively black pcb with white/brass/gold.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: cucgach on Mon, 27 May 2019, 12:05:47
Shipped a think6.5 prototype with polycarb top and solarized dark (wavez green) bottom to Voxkey and BHK, built with retooled blacks and GMK calm depth keycaps and midnight blue alu badge, raw brass weight (not pvd'd yet). It is fully functional, though the production version will have a few improvements.

Voxkey and BHK will bring it to the keycon in NYC! Please check it out if you will be at Keycon this year :)

Any stream or video link please?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Mon, 27 May 2019, 14:38:18
Think6.5 raffle update:

We are finalizing a few last unconfirmed payments (almost done!) and the plan is to raffle all prizes for our GB participants on Wednesday, May 29th.

In the mean time, if you are a participant and have a minute, please kindly check again your payment status, and let me know if there is any error (e.g., paid showed cancelled, or the other way around). If there is a payment status error please let me know.

https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Wed, 29 May 2019, 17:36:32
Live streamed the raffle on Instagram, and here are the results:

https://docs.google.com/spreadsheets/d/1blZ07CFPSgISsZX9lWgjmE8l2V1kjlWdPbYJzek6jn4/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: mankikami on Wed, 29 May 2019, 22:11:45
Gratz winners T_T
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: spyruf on Wed, 29 May 2019, 22:22:38
oh cool, I won a PC badge!
Are there any pics of it / color?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: whinmeister on Wed, 29 May 2019, 23:03:25
Congrats to all raffle winners!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: coffeeshopcoder on Thu, 30 May 2019, 01:20:20
congrats to the raffle winners !!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Vov on Thu, 30 May 2019, 01:45:03
Grats to the winners!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: kolyz on Thu, 30 May 2019, 08:53:40
woooo I won a pc badge!  :eek:
@oldcat Will the raffle prize be included with the keyboard when it ships or is there anything I need to do/ fill out to claim it first?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Bhk1004 on Thu, 30 May 2019, 11:22:19
oh cool, I won a PC badge!
Are there any pics of it / color?

Doesnt exist yet so no pictures. It was added on after.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Thu, 30 May 2019, 13:02:29
woooo I won a pc badge!  :eek:
@oldcat Will the raffle prize be included with the keyboard when it ships or is there anything I need to do/ fill out to claim it first?

Hey do not worry, we will be working on the prizes. No actions need to be taken to claim them.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Thu, 30 May 2019, 15:56:48
hello friends,

@voxkey has received the functional prototype for Think6.5 today, and he will take the prototype to the keycon in NYC with BHK!

If you happen to be in the keycon, check it out!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: davidkoleda on Thu, 30 May 2019, 18:45:59
Congratulations to the winners!

Oh and by the way, the white + green PCB looks sick!!!!!! :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Fri, 31 May 2019, 00:55:07
Update 5/30/2019:

Full brass production under way
Brass badges production under way

Sorry for the low-res images in factory

(https://i.imgur.com/59dSNTh.jpg)

(https://i.imgur.com/lfQndHP.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Wed, 05 June 2019, 12:39:52
6/5/2019 Update:

Designed packaging.

(https://i.imgur.com/Fb4jf4R.jpg)

(https://i.imgur.com/os8KbGm.jpg)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Moridin on Wed, 05 June 2019, 12:59:57
Looking good!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Wed, 12 June 2019, 01:07:34
Update 6-10-2019:

Full brass all bottom pieces CNC and polishing done, in PVD (no pics to share yet)

Top pieces just started CNC, see pic

All brass badges should be about done,

PC and aluminum no updates this week.

[attachimg=1]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Ferisea on Fri, 14 June 2019, 07:32:08
Oh no, I found this super late, is it still possible to join the GB and be waitlisted?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Moridin on Fri, 14 June 2019, 14:02:24
Oh no, I found this super late, is it still possible to join the GB and be waitlisted?

Unfortunately not AFAIK.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Zurg Eon on Wed, 19 June 2019, 17:33:23
Retracted.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: vision-quest on Wed, 19 June 2019, 20:25:46
This board is so damn sweet, bummed I missed the GB. Excited to see the photos when they start coming in.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Ferisea on Thu, 20 June 2019, 19:57:00
Oh no, I found this super late, is it still possible to join the GB and be waitlisted?

Unfortunately not AFAIK.

That's ok, it looks awesome! Can't wait to see pics coming in.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: johnsontai on Sat, 22 June 2019, 18:45:15
Found this one week after GB ended, really wish there's R2...
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: ninjacore on Sun, 23 June 2019, 13:59:51
Found this one week after GB ended, really wish there's R2...

400+sold, there will be plenty on mechmarket.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Egobean on Mon, 24 June 2019, 15:57:26
i would love to buy one of these keyboards too they are beautiful!
Title: Re: 【GB】Think6.5
Post by: NoEndGame on Mon, 24 June 2019, 17:19:25
If anyone backs out or has already paid but doesn't want it, I'll take your spot ;)

Beautiful keeb
Title: Re: 【GB】Think6.5
Post by: SeriousBG on Tue, 25 June 2019, 00:31:35
If anyone backs out or has already paid but doesn't want it, I'll take your spot ;)

Beautiful keeb
I don't think there are spot transfers on this group buy
There is the E6.5 that people are trying to transfer right now though with a similar layout
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: lolafineday on Tue, 25 June 2019, 06:57:23
If anyone backs out or has already paid but doesn't want it, I'll take your spot ;)

Beautiful keeb
I don't think there are spot transfers on this group buy
There is the E6.5 that people are trying to transfer right now though with a similar layout
Spot transfers can happen when you get a shipping invoice, that's then you can switch shipping address

Sent from my SM-G975F using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: NoEndGame on Tue, 25 June 2019, 17:12:59

If anyone backs out or has already paid but doesn't want it, I'll take your spot ;)

Beautiful keeb
I don't think there are spot transfers on this group buy
There is the E6.5 that people are trying to transfer right now though with a similar layout
[/quote]


I don't think there are spot transfers on this group buy
There is the E6.5 that people are trying to transfer right now though with a similar layout
[/quote]Spot transfers can happen when you get a shipping invoice, that's then you can switch shipping address

Sent from my SM-G975F using Tapatalk
[/quote]

Okay cool - I'll check those out. Thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Tue, 25 June 2019, 21:41:23
Update for full brass:

[attachimg=1]

[attachimg=2]

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Tue, 25 June 2019, 21:44:25
If anyone backs out or has already paid but doesn't want it, I'll take your spot ;)

Beautiful keeb
I don't think there are spot transfers on this group buy
There is the E6.5 that people are trying to transfer right now though with a similar layout
Spot transfers can happen when you get a shipping invoice, that's then you can switch shipping address

Sent from my SM-G975F using Tapatalk

Sorry spot transfers are not allowed with this GB. Keyboards will be shipped to PayPal confirmed addresses unless personal address is changed during production and recorded with PayPal.Hope you understand.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Egobean on Wed, 26 June 2019, 20:18:03
is anyone selling their keyboard im very interested please message me if you are. :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: anubizs on Wed, 10 July 2019, 21:28:25
If anyone is selling their keyboard im very interested. Just drop me a message  :D
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: architones on Wed, 10 July 2019, 22:15:33
If you guys are looking to buy GB spots, oldcat just said in the post above yours that spot transfers aren't allowed. The board's haven't been finished yet either so you'll have to wait until the boards are shipped to buy them on mechmarket
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: coffeeshopcoder on Thu, 11 July 2019, 00:02:35
@oldcat - what’s the process for changing shipping address. I’m moving in August, and I will be updating the address in PayPal once I get keys. How would I inform you/potter ?
I’ll PM you if that’s better -
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: coffeeshopcoder on Mon, 15 July 2019, 19:19:51
^^^ bump ? Not urgent, I'm moving close to august 15th.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: timbaaa on Mon, 15 July 2019, 22:32:00
The man is currently on a family vacation until early August I believe.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: lamenthe on Fri, 19 July 2019, 02:12:51
I just got seriously into Mech. So bummed I missed this :((
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: coffeeshopcoder on Fri, 19 July 2019, 02:22:26
The man is currently on a family vacation until early August I believe.

Ah I see...
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: spyruf on Fri, 19 July 2019, 11:41:58
I just got seriously into Mech. So bummed I missed this :((
There will be plenty in aftermarket
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Egobean on Wed, 24 July 2019, 15:37:33
has anyone received their keyboard yet?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Lelantos on Wed, 24 July 2019, 15:39:11
has anyone received their keyboard yet?
Bruh

Sent from my SM-G960U1 using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: eskimojo on Wed, 24 July 2019, 15:40:16
has anyone received their keyboard yet?
Predicted fulfilment is September, so I think it's safe to say nobody except Oldcat has.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: warmsoda on Sun, 28 July 2019, 22:14:01
I didn’t realize there was a a Black PC version, I don’t recall there being another option besides frosted in the GB form. Did I miss something?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Moridin on Mon, 29 July 2019, 01:58:45
I didn’t realize there was a a Black PC version, I don’t recall there being another option besides frosted in the GB form. Did I miss something?

Yes. Frosted PC. Black PC. 4 different aluminium editions. Brass.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: whinmeister on Mon, 29 July 2019, 08:37:28
I didn’t realize there was a a Black PC version, I don’t recall there being another option besides frosted in the GB form. Did I miss something?

Yes. Frosted PC. Black PC. 4 different aluminium editions. Brass.
Don't worry. I missed that as well. I was so concentrated on getting a PC that it's all that mattered when I filled out the order form.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Mon, 05 August 2019, 01:38:51
Finally back to States...
China’s vpn banning situation was really bad
Happy to report that Think6.5 is progressing along smoothly. Will monitor progress and provide shipping time estimates late August/early September.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: voxkey on Mon, 05 August 2019, 10:36:34
Finally back to States...
China’s vpn banning situation was really bad
Happy to report that Think6.5 is progressing along smoothly. Will monitor progress and provide shipping time estimates late August/early September.

Good to have you back  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Wed, 07 August 2019, 22:28:12
Think6.5 matching artisan is here, please use this link to purchase, there are 20 each color available:

https://docs.google.com/forms/d/1iz8ENJLhp3or2YqZw_zSfD-CyfYvmhFUFUNkc0WMxDU/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Thu, 08 August 2019, 22:13:39
First look of the full brass think6.5 (black PVD).

So heavy that the USPS scale cannot handle it....maxed out

[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: dannyny on Thu, 08 August 2019, 23:00:34
any extras available?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Egobean on Sun, 11 August 2019, 21:25:39
anyone willing to part with theirs?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: cucgach on Wed, 14 August 2019, 09:29:11
Black PVD looks like lacquer. So awesome!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: _BMW_M3_ on Sun, 18 August 2019, 22:40:31
Anyone that wants to sell their full brass (pref black but any is fine) board, please let me know. I'll pay what you want. :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: jackie89 on Wed, 21 August 2019, 01:13:04
Likewise, if anyone is willing to part with theirs - PM me, I'm interested.

Can't believe I missed this :(
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: mankikami on Sun, 25 August 2019, 21:01:46
Anyone that wants to sell their full brass (pref black but any is fine) board, please let me know. I'll pay what you want. :)
I want your BMW M3 for brass Think65  :))
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: wellbeing44 on Mon, 26 August 2019, 00:13:08
Hope to see some pics of the black pc!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: _BMW_M3_ on Mon, 02 September 2019, 19:19:35
Anyone that wants to sell their full brass (pref black but any is fine) board, please let me know. I'll pay what you want. :)
I want your BMW M3 for brass Think65  :))

Sorry mate, drive a Lexus RC F these days. But I do have cash ;P
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Bhk1004 on Wed, 04 September 2019, 10:30:20
Guys. Below is an update that was provided to me my Gray Studio.

All Brass(CNC & polishing & PVD) are all finished and  I willchecked on September 9.

PC(Transparent )CNC has been completed,polishing is under way.

PC(Black) is 90% complete, part of the bottom case is deformed.( new materials have been repaired and processed, and CNC is expected to be completed on September 15).

Aluminum , top case CNC processing completed 80% (120 sets);and 20% (32 sets) of bottom case have been CNC completed.

Brass namebadge & counterweight (CNC finished, polishing)

Aluminum namebadge (more than 400 completed, expected to be completed by CNC on September 10)

Keyboard packages are still proofing, compatible with space65 and think6.5

Spoke to demo, pcbs are expected to be complete within 2 weeks, will be with potter when keyboards are fully complete.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: bball2 on Wed, 04 September 2019, 10:36:16
Awesome! Thanks for the update Bhk1004
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Thu, 05 September 2019, 20:46:55

Manufacturing progress from Airpotter (9-5-2019)

Brass: all done, awaiting final QC.
Transparent PC: CNC done, being polished and sandblasted
Black PC: Top pieces done. bottom roughly 10 left
Alu: top pieces 120 done, bottom pieces 35 done.

PCB: in mass manufacturing process
Box: design complete, proto complete, awaiting manufacturing
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: glances on Thu, 05 September 2019, 22:23:25
Throwing it out here just in case. If anyone is willing to swap their Clear PC (ansi badge/hotswap) with my Alu Wavez Green (ansi badge/hotswap) let me know!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: whinmeister on Fri, 06 September 2019, 11:07:09
Dang I must have been out of it to have missed the black PC.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Hell-es on Fri, 06 September 2019, 13:39:08
Just saw the E-White  :eek: :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: danielucf on Thu, 19 September 2019, 16:51:10
Excited for more updates/pictures when available also was on page 3
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: eskimojo on Thu, 19 September 2019, 17:17:02
Excited for more updates/pictures when available also was on page 3

Relaying from Discord/Wechat:

Think6.5 Progress:


Transparent PC: 370 sets of CNC are all processed and then sandblasted immediately.


Aluminum alloy shell: 180 sets of CNC have been processed, 90 sets of case have not been completed, and the top case is expected to be completed on September 25.


Brass : inspection found some of bumps, go back to plating, re-grinding and re-treatment.


Black PC: 90 sets of bottom case have been completed. The deformation of top case is huge big. The yield of good products is only 20%. More than 80 stop case of black PC have been scrapped. Now the problem is being solved to improve the yield.


Name plate & counterweight:
800 brass badges & 920 brass counterweights, all CNC processed, is polishing.

1100 aluminium badges,CNC all finished processing, is polishing, and other aluminium case processing will be oxidized together.

Namebadge boxes: 130, CNC complete. To be sandblasted with the case.
6.5 The overall number is too large, so there are some delays[Sob]. I try to complete some shipments of PC cases by October or early October.
It should be shipped in batches.

I'll check the PC's shell first, and then give it to my partner, who will deliver the goods.

I'll go back to merchandise oxidation.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: wowja on Fri, 20 September 2019, 11:05:02
I need and want this kit! Is there any way I can still get a spot?!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: ninjacore on Fri, 20 September 2019, 11:32:33
I need and want this kit! Is there any way I can still get a spot?!

I'm sure there will be a lot for sale once they ship since there were so many participants, but certainly too late in the game to get a GB spot (and I don't think the runner is supported spot swapping).
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Mon, 23 September 2019, 12:13:45
Think6.5 update: PC cases done, expect to finish all Alu cases by 10/1. Some delays for full brass (some PVDs are again re-worked). Will share address change form soon and expect shipping invoices from airpotter.

[attachimg=1]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Mon, 23 September 2019, 12:21:26
Production PCB by Demo Studio

[attachimg=1]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: itunesacc on Sat, 28 September 2019, 03:17:02
Do you have any extras? i really want to get this one
or Is there someone willing to sell his spot?
PM me plz!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: AlcoholEnthusiast on Sat, 28 September 2019, 12:17:50
Do you have any extras? i really want to get this one
or Is there someone willing to sell his spot?
PM me plz!

There are no spot sellings iirc. You'll have to wait until people receive theirs and sell.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: ogp3 on Mon, 30 September 2019, 11:00:35
Will there be any opportunity in the future to buy more of the front badges? I'm seriously regretting not adding the additional colored badges to my order!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: timbaaa on Mon, 30 September 2019, 11:24:10
Will there be any opportunity in the future to buy more of the front badges? I'm seriously regretting not adding the additional colored badges to my order!

I second this.
Not sure if there are plans to do another run, but I would love to get a couple of them.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: kanki0213 on Tue, 01 October 2019, 09:07:57
Can I add an extra hotswap PCB to my order?


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Hell-es on Tue, 01 October 2019, 16:47:37
Can I add an extra hotswap PCB to my order?


Sent from my iPhone using Tapatalk
2nd this ;)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: Kuro07 on Thu, 10 October 2019, 01:55:24
@oldcat Will there be extras post production?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: ninjinphu on Fri, 11 October 2019, 15:08:58
Have shipping invoices been sent out yet? Just want to make sure I don't miss it.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (ordering material)
Post by: oldcat on Fri, 11 October 2019, 21:51:05
From Airpotter: shipping charge will be billed to paypal soon, and if you would like to change address, please update your address in PayPal, and Potter will ship to the updated address that paid the shipping fees

[attachimg=1]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: Hell-es on Sat, 12 October 2019, 01:34:55
Please consider security here ;) and don‘t brake too harsh
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: oldcat on Sat, 12 October 2019, 20:56:47
Please consider security here ;) and don‘t brake too harsh

haha yes sir
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: Hell-es on Sun, 13 October 2019, 03:27:04
Please consider security here ;) and don‘t brake too harsh

haha yes sir

Oh, and if you accidentally swap my pc version white this ewhite thats ok ;)

Shipping invoices soon ?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: bball2 on Tue, 15 October 2019, 10:44:54
Paid my shipping invoice  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: jaredddm on Tue, 15 October 2019, 10:47:49
invoice paid! shipping lead time?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: mastercheif116 on Tue, 15 October 2019, 10:49:52
invoice paid! shipping lead time?

Second this! Paid, now I'm (im)patiently waiting for that shipping notification!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: Hell-es on Tue, 15 October 2019, 11:14:45
Respect for potters bargain skills - shipping fee is totally ok and cheaper than ecpected

Paid  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: tunadesu on Tue, 15 October 2019, 13:13:01
Respect for potters bargain skills - shipping fee is totally ok and cheaper than ecpected

Paid  :thumb:

Ya I was expecting at least $50 to MA. It was like 40ish. Good stuff
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: danielucf on Tue, 15 October 2019, 14:11:23
Is this shipping like the E.65 method? That arrived in two days I think, might have been some DHL or something.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: AlcoholEnthusiast on Tue, 15 October 2019, 15:07:32
Just paid shipping! Solid price - can't wait to see what this looks like in person.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: architones on Tue, 15 October 2019, 17:42:58
Is this shipping like the E.65 method? That arrived in two days I think, might have been some DHL or something.

According to the Discord, it will be through DHL.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: Moridin on Wed, 16 October 2019, 00:00:49
Shipping should commence over the weekend. So next week is realistic!  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: whinmeister on Wed, 16 October 2019, 13:08:57
Woohoo! Shipping invoice received and paid. It's starting to become a reality for my very first GB.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: empa on Wed, 16 October 2019, 16:09:39
Can't wait to take delivery. Invoice paid
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: cucgach on Thu, 17 October 2019, 08:49:09
shipping fee paid! I have 2 orders, will they be shipped in 1 batch or separately? thanks.
can't wait for it and the badge collection khakhakakha
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: kolyz on Thu, 17 October 2019, 21:00:06
how long does shipping to north america usually take with DHL from China?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (shipping invoices soon)
Post by: oldcat on Thu, 17 October 2019, 21:44:11
I was informed by Potter that before packages can be shipped, a phone number needs to be collected for the corresponding paypal emails/order numbers, I have created a form for you to fill out the phone numbers:

https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/viewform
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: AIRPOTTER on Thu, 17 October 2019, 23:53:40
[Important] We have been packing and are preparing for shipping! Please fill out the google form that collects phone numbers that will make the shipping process much easier, and easier for you to receive shipping notifications.

Thank you, everyone.

https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: sohitone on Fri, 18 October 2019, 02:05:31
What do we put for the order number? Is that the invoice number [Think6.5-####] or the one with our username?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Moridin on Fri, 18 October 2019, 02:13:59
What do we put for the order number? Is that the invoice number [Think6.5-####] or the one with our username?

From what we figured out in Discord, it's the latter, with your username.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: ninjinphu on Fri, 18 October 2019, 09:16:46
FYI you can find your order # in this sheet:

https://docs.google.com/spreadsheets/d/1rOTqOjr9nVbYgNa4URBm4Epm_39DB-gAZ9jdzM3rATk/edit#gid=1590735700

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Kevadu on Fri, 18 October 2019, 15:48:36
Oh, I think I entered the wrong number.  Can I change that?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: eskimojo on Fri, 18 October 2019, 16:09:20
Oh, I think I entered the wrong number.  Can I change that?

Provided your paypal email is correct, Potter should be able to match them up anyway.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: FinalEleven on Fri, 18 October 2019, 21:31:40
Invoice paid! I can't wait!

This will be my first keyboard bought from a group buy so I'm super excited!   :D
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: cuongcan2020 on Sun, 20 October 2019, 00:31:37
Is there any way I can change my shipping address?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Bhk1004 on Sun, 20 October 2019, 08:08:53
Is there any way I can change my shipping address?

Change it in PayPal before you pay your shipping invoice. That's the address that will be used to ship the think65.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: AIRPOTTER on Mon, 21 October 2019, 02:21:00
If you have not done this already, we have been packing and are preparing for shipping! Please fill out the google form that collects phone numbers that will make the shipping process much easier, and easier for you to receive shipping notifications.

Thank you again, everyone.

https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: bball2 on Wed, 23 October 2019, 12:02:14
Got my shipping info, looks like it should arrive by tomorrow  :thumb:
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: mastercheif116 on Thu, 24 October 2019, 09:00:09
Got my shipping info, looks like it should arrive by tomorrow  :thumb:

Haven't got mine yet - are you in the US?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: JackieX on Thu, 24 October 2019, 09:35:38
If you have not done this already, we have been packing and are preparing for shipping! Please fill out the google form that collects phone numbers that will make the shipping process much easier, and easier for you to receive shipping notifications.

Thank you again, everyone.

https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/

I want to contact to you by Discord to take note about shipping method. How can I contact to you?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: BlankeyGotCaps on Thu, 24 October 2019, 11:38:28
For those who are not a part of the discord. A test shipment of 10 went out the other day (Lucky two guys above). 200 or so I believe are slated to ship today/tomorrow.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: qx2 on Thu, 24 October 2019, 12:00:37
I got lucky too then - my shipment should arrive today as well. So hyped, this is my first GB case!  ;D
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kolyz on Thu, 24 October 2019, 13:34:45
I guess I am one of the lucky ones, should be getting a delivery by the end of today or tomorrow.  ;D
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: bball2 on Fri, 25 October 2019, 23:36:43
Got mine delivered today, here are a few pics of the unboxing process / final build:


(https://i.imgur.com/IJ7wBjP.jpg)

(https://i.imgur.com/YU6iye4.jpg)

(https://i.imgur.com/KYCqTmQ.jpg)

(https://i.imgur.com/tQrWAtp.jpg)

(https://i.imgur.com/gvkKpmP.jpg)

(https://i.imgur.com/JrfV45r.jpg)

(https://i.imgur.com/wdOM5lR.jpg)

(https://i.imgur.com/vBx91ar.jpg)

Really happy with it so far!

Anyone know how to program the board? Didn't find any default setups on config.qmk.fm
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: tunadesu on Sat, 26 October 2019, 15:41:49
i THINK i got shipping noti today. It was a DHL message via txt. Anyone else get that? Coming from HAOTU TRADING. Should arrive Monday!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: bball2 on Sat, 26 October 2019, 16:07:37
i THINK i got shipping noti today. It was a DHL message via txt. Anyone else get that? Coming from HAOTU TRADING. Should arrive Monday!

Got a text from DHL as well but mine said from "GUANGZHOU SAILU"
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: tunadesu on Sat, 26 October 2019, 16:39:06
i THINK i got shipping noti today. It was a DHL message via txt. Anyone else get that? Coming from HAOTU TRADING. Should arrive Monday!

Got a text from DHL as well but mine said from "GUANGZHOU SAILU"

Huh, yeah when I click the link it says "Guangzhou good rabbit"
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Bhk1004 on Sat, 26 October 2019, 19:30:18
If you have not done this already, we have been packing and are preparing for shipping! Please fill out the google form that collects phone numbers that will make the shipping process much easier, and easier for you to receive shipping notifications.

Thank you again, everyone.

https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/

I want to contact to you by Discord to take note about shipping method. How can I contact to you?

Potter is only reachable via WeChat atm.

All packages are going out via dhl. If you need help contacting him or need to discuss something you can reach out to me via PM or on discord.

Discord = bhk1004#4311
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: ninjinphu on Tue, 29 October 2019, 12:25:27
This is one of those moments where I wish I didn't wait on the GB and end up on the upper 400 for shipping order haha
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: tunadesu on Tue, 29 October 2019, 12:52:38
got mine yesterday btw! It is great quality! 1st pc board for me
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Hell-es on Tue, 29 October 2019, 13:46:14
Also got mine yesterday - a real beauty  :thumb:

Unfortunately the pcb seems to have a problem - the row from A to Return doesn‘t work - just caps lock works - even after flashing the pcb.

In discord there was another user with the same problem ... hope its just the two of us ... but if anyone else has the same problem, please let me know

Potter is already in contact with demo

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kolyz on Tue, 29 October 2019, 21:28:34
Just received mine, I'm so happy I went with the space grey case.

Quick question though, I had won a polycarb badge but it wasn't shipped with my keyboard.
Is this supposed to come separately?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kzlow on Tue, 29 October 2019, 21:46:38
Just received mine, I'm so happy I went with the space grey case.

Quick question though, I had won a polycarb badge but it wasn't shipped with my keyboard.
Is this supposed to come separately?

LOL, me too. Exactly the same colour of choice, same winning in the Raffle, but also not in the package.  :-* :-*
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Moridin on Wed, 30 October 2019, 00:43:09
Think6.5° has been added to QMK by MechMerlin! Both PCBs.

https://config.qmk.fm/#/gray_studio/think65/hotswap/LAYOUT_65_ansi_blocker

https://config.qmk.fm/#/gray_studio/think65/solder/LAYOUT_65_ansi_blocker
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: merlin64 on Wed, 30 October 2019, 08:03:44
Think6.5° has been added to QMK by MechMerlin! Both PCBs.

https://config.qmk.fm/#/gray_studio/think65/hotswap/LAYOUT_65_ansi_blocker

https://config.qmk.fm/#/gray_studio/think65/solder/LAYOUT_65_ansi_blocker

Thanks for posting this.

Please let me know if there are any problems. I'm most unsure about the indicator leds: Caps Lock, Scroll Lock, and Num Lock
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Kevadu on Wed, 30 October 2019, 19:51:28
I'm order #221 and haven't even gotten a shipping notification yet.  When do I start worrying?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: wukong_bot on Wed, 30 October 2019, 19:55:28
I'm order #221 and haven't even gotten a shipping notification yet.  When do I start worrying?
They're not shipping in order number. Check discord for more updates. like 1/3 have been shipped so far

Sent from my GM1917 using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Kevadu on Wed, 30 October 2019, 23:01:47
Oh, I just got my notification.

See, complaining works!  ;)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: wukong_bot on Thu, 31 October 2019, 00:28:35
Oh, I just got my notification.

See, complaining works!  ;)
Luckyyyyy :( guess I need to complain more

Sent from my GM1917 using Tapatalk

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: cucgach on Thu, 31 October 2019, 05:38:46
Mine arrived yesterday..
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Kevadu on Fri, 01 November 2019, 16:38:53
Mine arrived today.  The black polycarb looks amazing, so glad I went for it.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: cucgach on Fri, 01 November 2019, 21:42:25
Mine arrived today.  The black polycarb looks amazing, so glad I went for it.

mind to share some photos?

Mine is frosty one, pretty sick as well but i wish i went for 1 smoke 1 frosty
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Moridin on Sat, 02 November 2019, 03:25:31
Packaging:

[attachimg=1]
[attachimg=2]
[attachimg=3]

Optional black PVD weight and badge:

[attachimg=4]

Tools included:

[attachimg=5]

Opening the box and taking out the keyboard, still wrapped:

[attachimg=6]
[attachimg=7]
[attachimg=8]
[attachimg=9]

Taking plastic wrap off:

[attachimg=10]

Black PVD weight next to gold PVD:

[attachimg=11]

PCB was mounted inside keyboard case, so I took it out:

[attachimg=12]

Weight screwed into the bottom half of the case:

[attachimg=13]

Replaced gold PVD brass badge with the optional black one:

[attachimg=14]

Mounted black weight (screwed in with gold screws, unfortunately no black PVD screws were included), stabs, and put the keyboard back together:

[attachimg=15]
[attachimg=16]
[attachimg=17]
[attachimg=18]

Think6.5° dressed in GMK Minimal with GMK Modern Dolch accents; using stock Sakurios (5 out of the 70 I got had ping; replaced with proper ones, will lube springs in future):

[attachimg=19]
[attachimg=20]

Testing RGB:

[attachimg=21]
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kolyz on Sun, 03 November 2019, 13:44:02
anyone know how to change the LED colors, cycle through the modes, etc?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Kevadu on Sun, 03 November 2019, 15:54:29
Mine arrived today.  The black polycarb looks amazing, so glad I went for it.

mind to share some photos?

Mine is frosty one, pretty sick as well but i wish i went for 1 smoke 1 frosty

Here you go (https://imgur.com/a/uMNEnwN).
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone #, shipping in process)
Post by: AIRPOTTER on Sun, 03 November 2019, 20:50:02
Till now, for PC and Alu: there are about 50 orders I have not received phone number (please kindly submit the phone numbers soon). About 80 boards not shipped yet. And boards going out every day.

For Brass: there are still some minor issues to address before shipping. Please kindly wait a bit longer. Would like to deliver good products

If you have not submitted your phone number, here is the link: https://docs.google.com/forms/d/1hBoqndypP1fc5TvmGQ0WROsoVLXDhUkBGrijSaL1I84/
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: cuongcan2020 on Tue, 05 November 2019, 17:34:09
My order # is 26 but still haven't gotten any shipping notification. Is it still going on?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: tskiller on Tue, 05 November 2019, 18:02:44
No idea but no shipping for me either. Getting nervous as i think PP protection is up soon?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ninjacore on Tue, 05 November 2019, 18:16:58
I don’t think you’ll have any reason to use PayPal support. A number of users have reported issues and they’ve been quickly resolved by the GB runners.

Your board will show up soon and you’ll be pleased :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: kolyz on Tue, 05 November 2019, 21:40:16
No idea but no shipping for me either. Getting nervous as i think PP protection is up soon?
no need to use paypal protection with this group buy. Gray studios provides good support and they usually answer emails very quickly.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Moridin on Wed, 06 November 2019, 01:18:36
I think it was mentioned in the Discord that the next batch of boards go out on Thursday.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: wukong_bot on Wed, 06 November 2019, 02:10:15

first time making a typing test vid. hope its enjoyable :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: wellbeing44 on Wed, 06 November 2019, 02:51:20
No idea but no shipping for me either. Getting nervous as i think PP protection is up soon?
no need to use paypal protection with this group buy. Gray studios provides good support and they usually answer emails very quickly.
Can confirm, Potter answered my email pretty fast. He's still sorting some things out though.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: whinmeister on Wed, 06 November 2019, 08:30:54
I was in the late group, so I'm hoping to receive shipping notification soon.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: cucgach on Wed, 06 November 2019, 10:51:01
Mine arrived today.  The black polycarb looks amazing, so glad I went for it.

mind to share some photos?

Mine is frosty one, pretty sick as well but i wish i went for 1 smoke 1 frosty

thanks! gorgeous board indeed.
Here you go (https://imgur.com/a/uMNEnwN).
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: cucgach on Wed, 06 November 2019, 11:03:38
anyone know how to change the LED colors, cycle through the modes, etc?

should be Fn + W (Fn key is on the left of the left arrow key)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: tskiller on Wed, 06 November 2019, 11:33:33
I'll believe it when it's in my hands and fully functional. We are months late, and despite what was initially said, brass isn't shipping first and we aren't going in purchase order either. People have gotten the wrong cases shipped to them, missing accessories, and PCBs with incorrectly installed diodes. What little communication happens seems to be blowing smoke; telling us what we want to hear.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ninjacore on Wed, 06 November 2019, 12:39:15
I'll believe it when it's in my hands and fully functional. We are months late, and despite what was initially said, brass isn't shipping first and we aren't going in purchase order either. People have gotten the wrong cases shipped to them, missing accessories, and PCBs with incorrectly installed diodes. What little communication happens seems to be blowing smoke; telling us what we want to hear.

I think I've only seen 5 - 10 people with issues and afaik, they've all been responded to quickly and are resolved/in the process of being resolved.

That's a fairly small percentage of orders with issues, considering the scale of this GB and the fact that it wasn't facilitated by a retailer.

I'm not trying to make excuses, just provide a different perspective.  Patience is the name of the game with keyboard-related group buys.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kolyz on Wed, 06 November 2019, 14:15:16
anyone know how to change the LED colors, cycle through the modes, etc?

should be Fn + W (Fn key is on the left of the left arrow key)

Yeah that works, thanks!

I wish we had the default programming of the PCB as it was shipped, because I plan to reprogram it with QMK and I don't want to forget to add something useful.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: kolyz on Wed, 06 November 2019, 14:42:56
anyone know how to change the LED colors, cycle through the modes, etc?

should be Fn + W (Fn key is on the left of the left arrow key)

Yeah that works, thanks!

I wish we had the default programming of the PCB as it was shipped, because I plan to reprogram it with QMK and I don't want to forget to add something useful.

Nevermind! Seems like a default layout has been added to the qmk configurator  :D https://config.qmk.fm/#/gray_studio/think65/hotswap/LAYOUT_65_ansi_blocker
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone number for shipping)
Post by: Moridin on Wed, 06 November 2019, 15:51:07
anyone know how to change the LED colors, cycle through the modes, etc?

should be Fn + W (Fn key is on the left of the left arrow key)

Yeah that works, thanks!

I wish we had the default programming of the PCB as it was shipped, because I plan to reprogram it with QMK and I don't want to forget to add something useful.

It was posted to the discord - the original JSON file.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: orim23 on Fri, 08 November 2019, 15:37:52
Still waiting for my board. feels like shipping is taking a month! I paid for shipping right away, which is soon a month ago.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Kevadu on Sat, 09 November 2019, 19:15:07
Anyone have a QMK configuration for a split backspace?  I'm a little confused because the default config is only using 15 columns but with split backspace you have 16 in the top row.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Koï on Sun, 10 November 2019, 10:14:25
If anyone want to sell his board in clear PC badgeless, pm me please.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Kevadu on Sun, 10 November 2019, 10:37:25
Anyone have a QMK configuration for a split backspace?  I'm a little confused because the default config is only using 15 columns but with split backspace you have 16 in the top row.

Replying to my own comment because I figured it out.  Realized I needed to use LAYOUT_all rather than LAYOUT_65_blocker.  It's a little confusing because despite the name the difference doesn't appear to have anything to do with whether or not there's a blocker.  Rather LAYOUT_all adds support for split backspace and split left shift.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: twistitup on Sun, 10 November 2019, 11:31:01
Looking to buy a PC hotswap Think6.5°, let me know if you're trying to get rid of yours!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Sic_Alpha on Sun, 10 November 2019, 16:24:15
Still waiting for my board. feels like shipping is taking a month! I paid for shipping right away, which is soon a month ago.

Pretty sure there's a lot of us still waiting.  I was pretty low # on purchase list, also paid shipping within 5 minutes of receiving invoice.  Tic toc tic toc
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: orim23 on Mon, 11 November 2019, 00:34:36
Still waiting for my board. feels like shipping is taking a month! I paid for shipping right away, which is soon a month ago.

Pretty sure there's a lot of us still waiting.  I was pretty low # on purchase list, also paid shipping within 5 minutes of receiving invoice.  Tic toc tic toc

Got my shipping notification. so it seems complaining works :-)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: add1ct3dd on Mon, 11 November 2019, 06:10:11
Still waiting for my board. feels like shipping is taking a month! I paid for shipping right away, which is soon a month ago.

Pretty sure there's a lot of us still waiting.  I was pretty low # on purchase list, also paid shipping within 5 minutes of receiving invoice.  Tic toc tic toc

Got my shipping notification. so it seems complaining works :-)

Lol I wish, 2 emails 0 replies!

Apparently the last 60 are meant to ship today, we'll see if that happens :)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: whinmeister on Mon, 11 November 2019, 08:34:33
Still waiting for my board. feels like shipping is taking a month! I paid for shipping right away, which is soon a month ago.

Pretty sure there's a lot of us still waiting.  I was pretty low # on purchase list, also paid shipping within 5 minutes of receiving invoice.  Tic toc tic toc

Good to know there are quite a few in the US still waiting. I've yet to receive shipping notification.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: infinitecurry on Mon, 11 November 2019, 15:55:01
I received my board but only the LED in the top left corner works. Everything else on the PCB seems fine, has anyone else experience this issue?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: odd on Tue, 12 November 2019, 01:18:43
I have issues with the RGB backlighting. The last 3 LEDs on the top right hand do not light up. Any hints or help to get this working, thanks.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Moridin on Tue, 12 November 2019, 02:10:36
For LED problems see Discord channel (shorting JL connector on PCB) or just email Potter. His address is pinned in Discord.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ponchofreedo on Tue, 12 November 2019, 15:31:42
i wish there were leftovers that we could potentially order :/ ... looks great
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: danielucf on Wed, 13 November 2019, 20:20:48
I did not get a badge with mine, who should I contact concerning this?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: BlankeyGotCaps on Thu, 14 November 2019, 20:07:05
I did not get a badge with mine, who should I contact concerning this?

Is your board badgeless? If so badgeless do not come with a badge on the side.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: danielucf on Thu, 14 November 2019, 21:39:24
Is your board badgeless? If so badgeless do not come with a badge on the side.

The price was the same so I requested they include the item I technically paid for. "Its easier to have one price" is not really a good excuse to not give someone something they technically paid for.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ninjacore on Thu, 14 November 2019, 23:39:32
Is your board badgeless? If so badgeless do not come with a badge on the side.

The price was the same so I requested they include the item I technically paid for. "Its easier to have one price" is not really a good excuse to not give someone something they technically paid for.
It's a completely different product, though, right? The top case is entirely different on badgeless vs. badged.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: danielucf on Fri, 15 November 2019, 01:28:52
It's a completely different product, though, right? The top case is entirely different on badgeless vs. badged.

You are right, I don't know why less milling would reduce the price. Silly me.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Hell-es on Fri, 15 November 2019, 02:40:16
It's a completely different product, though, right? The top case is entirely different on badgeless vs. badged.

You are right, I don't know why less milling would reduce the price. Silly me.

Maybe you have a different starting post from potter, but mine is


Key features


4. 4.5mm, integrated plate, with switch slot and corner cuts to optimize switch tolerance.
5. Four versions: ANSI with badge (compact 660), ANSI without badge, Compatible-layout with badge, and compatible-layout without badge
6. PCB: fully programmable, QMK, type-C (center position connector), underglow, ESC 4XRGB, 3 hotswap LED slots above badge, Kaihua hotswap sockets for


And

What’s In The Box?

Each Think65 will include the following:
1x case, top and bottom
1x brass weight (gold PVD)
1x brass badge (gold PVD, not included with layout #2(b) or #4(d))
1x PCB
Plenty of screws, rubber feet, LEDs, box designed by airpotter.



So for me that is not too complicated
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: tskiller on Fri, 15 November 2019, 11:36:34
Yeah I do not understand why one would feel entitled to a brass badge when they ordered the badgeless layout. The original post was quite clear with what you would get with that product.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: add1ct3dd on Sat, 16 November 2019, 12:56:17
Can we please get some clarity, information or even any form of contact regarding the remaining boards that haven't shipped yet.

The shipping dates keep sliding, the amount of contact between potter and bhk is reducing and oldcat hasn't been around for months. A lot of people now have theirs, but there's still people with nothing and some with incorrect boards or missing parts.

Later shipping dates are fine, but constant promises of shipping to then be greeted with nothing become tiresome, if there's a delay then just say, but no information is frustrating. Everyone is seemingly quiet in here, but there's a fair few disgruntled people in discord, so maybe this will get some visibility.

For reference I have sent potter 4 emails. 1 was regarding mobile number for shipping which he replied almost immediately. The other 3 emails have had 0 reply, and I don't believe they're blocked as he replied to the first one, and I've sent them from multiple addresses which use different providers.

It's a bit of a mumbled message because a lot of it is just frustrations being brought out, but just any information would be great, even if there's a delay. Realistic timeframes are far better than false ones.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: coffeeshopcoder on Sat, 16 November 2019, 19:44:47
Whatever happened to oldcat?

Wasn’t this GB supposed to be the one will all the superior communication ?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: micklll on Sat, 16 November 2019, 22:31:54
So many problems in this GB has arisen. The board is amazing but the logistics have been a nightmare.

First of all the GB runner Oldcat seems to have disappeared from the face of the earth, leaving all the communication duties to his moderator on discord. On Graystudio's side, shipping has constantly been pushed back with little to no updates from Potter even after deadlines have been crossed. I've paid the shipping invoice over a month ago and still have no idea when the board will be shipped out. Potter claims he would have shipped it out 2 weeks ago but continues to cover it up with excuses.

Second of all the pcbs (especially the hotswap ones) have had tons of issues. There has been reports of LEDs malfunctioning, diodes soldered in the wrong direction, and hotswap sockets not soldered on properly. The whole point of hotswap pcbs is to lower the barrier of entry in this hobby and eliminate soldering for newcomers. The hotswap socket issues force new users in the community to buy soldering tools to fix the mistakes made by Graystudio. I cannot endorse GrayStudio any longer. This isn't the first time. Space65's shipping was a sh*tshow as well. Save yourself a headache and avoid this manufacturer. I will reiterate this on GrayStudio's future group buy threads to warn others.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: orim23 on Sun, 17 November 2019, 03:03:38
Can someone tell me where the rubber-ring/gasket thingies go? I got 10 of them. That is more then needed for one side, but not two. which side do I put them on?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ninjacore on Sun, 17 November 2019, 03:17:49
Those are washers for screw-in stabilizers.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: orim23 on Sun, 17 November 2019, 03:30:01
Those are washers for screw-in stabilizers.
hu. TIL! thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Riskymilk on Sun, 17 November 2019, 21:58:55
Looking to buy a black Think6.5 if anyone doesn't want theirs. Thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: cattharsis on Mon, 18 November 2019, 23:37:02
Looking to buy a badgeless polycarb think 6.5 solder pcb if anyone wants to let theirs go. Please PM, Thanks!
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: baoduy23 on Tue, 19 November 2019, 08:00:37
Ok, I would like to ask why my order is not shipped yet?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: eskimojo on Tue, 19 November 2019, 08:23:51
Ok, I would like to ask why my order is not shipped yet?

(https://cdn.discordapp.com/attachments/549630609111253002/646205779120226324/image0.png)

Latest update from Potter (shared on Discord, can't blame you for not knowing) says that all pc and alu is handed to shipping agent. Tracking updates expected on Wednesday.

No updates on brass yet.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Riskymilk on Tue, 19 November 2019, 21:09:25
Looking to buy a black one (preferred badgeless)
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: A57RO on Sun, 01 December 2019, 04:45:36
Hi guys,

The letter I on my keyboard will not work, yes I have tried everything apart from solder which I’ve never done before and honestly don’t want to. It’s the think6.5 hotswap board, the key will only register when I place the switch at an angle leaning forward and it will register every time but when I fully seat the switch it will not register.

So can someone here please help me or tell me who to speak to and how to contact them? Alternatively is there any other pcb that will fit the think6.5? At this point it’s just an expensive brick and I can’t say I’m impressed.  I’ve reached out on gray studio instagram and in discord there’s a thread on discord if you wanna check it out I have pictures etc in there as well. I’m just really frustrated by this as its my first custom board and I can’t use it. :(
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: ninjacore on Sun, 01 December 2019, 07:35:16
Hi guys,

The letter I on my keyboard will not work, yes I have tried everything apart from solder which I’ve never done before and honestly don’t want to. It’s the think6.5 hotswap board, the key will only register when I place the switch at an angle leaning forward and it will register every time but when I fully seat the switch it will not register.

So can someone here please help me or tell me who to speak to and how to contact them? Alternatively is there any other pcb that will fit the think6.5? At this point it’s just an expensive brick and I can’t say I’m impressed.  I’ve reached out on gray studio instagram and in discord there’s a thread on discord if you wanna check it out I have pictures etc in there as well. I’m just really frustrated by this as its my first custom board and I can’t use it. :(

Sorry you’re having issues. It sounds like it’s almost certainly a hotswap socket solder issue since it works intermittently.  Have you tried different switches in the socket?  Do have any friends with a soldering iron?  Or an electronics repair shop nearby?
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: A57RO on Sun, 01 December 2019, 23:46:14
Hi guys,

The letter I on my keyboard will not work, yes I have tried everything apart from solder which I’ve never done before and honestly don’t want to. It’s the think6.5 hotswap board, the key will only register when I place the switch at an angle leaning forward and it will register every time but when I fully seat the switch it will not register.

So can someone here please help me or tell me who to speak to and how to contact them? Alternatively is there any other pcb that will fit the think6.5? At this point it’s just an expensive brick and I can’t say I’m impressed.  I’ve reached out on gray studio instagram and in discord there’s a thread on discord if you wanna check it out I have pictures etc in there as well. I’m just really frustrated by this as its my first custom board and I can’t use it. :(

Sorry you’re having issues. It sounds like it’s almost certainly a hotswap socket solder issue since it works intermittently.  Have you tried different switches in the socket?  Do have any friends with a soldering iron?  Or an electronics repair shop nearby?

Sorry for the belated response, I have now found a local Australian who will solder the HS for me and get it working, Honestly after my experience with this product and I will say it’s a great keyboard but the pcb is an absolute piece of **** the manufacture absolutely cheaped out here it was obviously rushed with little attention to detail. And I am not the only one with these issues either others have led’s that don’t work etc or just DOA. Now I will add that I didn’t buy direct from the drop I purchased this aftermarket so it's my own fault for obviously not checking further but after my experience, I’ve messaged gray studio on intsa, hit them up on there discord left messages here and not a single response and again I’m not the only one.

All due respect but I will never buy any of there products in the future, just a really poor show, no support, no spare pcb’s essentially you either learn to solder, find a friend who does or you’re left with an expensive brick.

These guys seem to just have no respect for their products and by the looks of it the community either.

Anyway all will hopefully be well after it’s fixed but in future never again from oldcat or potter they can keep their keyboards.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: olsen34 on Mon, 02 December 2019, 00:08:39
Just shows that lots of communication from the GB runner in the beginning doesn't mean **** if they disappear during times like these. Lol.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Moridin on Mon, 02 December 2019, 01:44:56
(...) I’ve messaged gray studio on intsa, hit them up on there discord left messages here and not a single response and again I’m not the only one (...)

Yeah, there's a firewall blocking you from him (and vice versa) along the way. You need to email Potter. His email is pinned in the #think65 channel on Graystudio's discord.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: A57RO on Mon, 02 December 2019, 02:49:57
(...) I’ve messaged gray studio on intsa, hit them up on there discord left messages here and not a single response and again I’m not the only one (...)

Yeah, there's a firewall blocking you from him (and vice versa) along the way. You need to email Potter. His email is pinned in the #think65 channel on Graystudio's discord.

I don’t think it makes any difference apparently from what I’ve heard he doesn’t respond even if you do direct email hence I’m not wasting anymore time on it. I’ll get it fixed locally and that’ll be that, I’m actually exited to actually use it, it’ll be my daily driver as I said I think it’s a great kb just very poor in every other area from the gb runners so will never ever support anything or any aftermarket stuff with their name on it I don’t care how good it is.

Just thinking out loud but who does business this way? It’s actually hilarious when you think about it, not a single follow up on anything, not even a “hows it going guys any feed back? Hope you’re all enjoying your new kb” nothing, nada. It’s really weird. Anyway I feel worse for the people that bought the all brass version or whatever it is seems they never getting theirs may as well call it a donation and be done with it.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Moridin on Mon, 02 December 2019, 02:51:25
Just thinking out loud but who does business this way? It’s actually hilarious when you think about it, not a single follow up on anything, not even a “hows it going guys any feed back? Hope you’re all enjoying your new kb” nothing, nada. It’s really weird. Anyway I feel worse for the people that bought the all brass version or whatever it is seems they never getting theirs may as well call it a donation and be done with it.

His phone was stolen recently, so he lost all access to his comms. Details in discord.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: A57RO on Mon, 02 December 2019, 14:07:49
Just thinking out loud but who does business this way? It’s actually hilarious when you think about it, not a single follow up on anything, not even a “hows it going guys any feed back? Hope you’re all enjoying your new kb” nothing, nada. It’s really weird. Anyway I feel worse for the people that bought the all brass version or whatever it is seems they never getting theirs may as well call it a donation and be done with it.

His phone was stolen recently, so he lost all access to his comms. Details in discord.

I’ve never heard that one before... Not trying to be rude, and hey maybe it was really stolen 🤷‍♂️ But that excuse is probably the most widely used by people that fail to communicate or deliver on promises, that and my kid was sick, my dog died or they were in hospital. I heard it all before.

Anyway my think65 is fixed now, and what do you know? Not a single bit of solder on the hotswaps lol
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: tskiller on Mon, 02 December 2019, 14:51:01
Any word on the brass? Been over a month since they took shipping invoice, most other things seem to have shipped but radio silence on brass.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: PocketAces on Sat, 07 December 2019, 07:57:21
ne extras avail


Sent from my iPhone using Tapatalk
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Hell-es on Sat, 07 December 2019, 10:59:57
Still waiting for further communication on pcb issues - communication could really be a bit eerrr more existant
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: oldcat on Sat, 21 December 2019, 22:54:58
All PC/aluminum have been shipped

Full brass is in final check stage and will ship out soon

Potter is planning to check with everyone their address and phone number. Wait for an email from him
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: oldcat on Sat, 21 December 2019, 22:55:53
Still waiting for further communication on pcb issues - communication could really be a bit eerrr more existant

Pls reach out in wechat group if possible, potter said his vpn access is sporadic
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: Hell-es on Sun, 22 December 2019, 02:39:20
Still waiting for further communication on pcb issues - communication could really be a bit eerrr more existant

Pls reach out in wechat group if possible, potter said his vpn access is sporadic

Finally again reached him again via mail - after initial communication was good.

Hopefully replacement will be sent next week.

A bit sad looking at a non working think for many weeks, but if it works in the end.




Glad to see you alive
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (collect phone # for shipping, 85% shipped)
Post by: kzwai on Fri, 27 December 2019, 08:29:04
wtb think6.5 with polycarbonate or rosegold case with hotswap pcb.

please pm
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: VipermanGT2 on Wed, 08 January 2020, 03:14:36
Anyone know if there are other PCB's that could be used with this? I'm assuming yes, but from what I see, it looks like the PCB would just be floating without being screwed to anything and only held in place by the switches.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: tskiller on Wed, 08 January 2020, 09:34:15
Looks like brass failed completely and we are getting refunds.

Really unhappy with the way communication and money was handled. They took shipping money from us knowing full well that production was having major issues. No real email or communication from GB runner to show what manufacturer issues were coming up.

I will not buy participating in any Graystudio group buys because of the way that communication was handled for this complete failure.

Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: Ho Young Kim on Wed, 08 January 2020, 20:05:03
I was very disappointed when this decision was made to wait.
But I appreciate his beliefs.
How much quality they thought of would they have made this decision....
I don't think it's been a long time to decide.
Please finish your refund and stay healthy.
I believe in your deduction.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: urbantheii on Wed, 08 January 2020, 20:12:51
Time to hang up my dreams everyone...no more brass for urban....
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: MCsOrangeJuice on Fri, 10 January 2020, 09:22:55
I'm kind of late to the party since this is my first build and I was waiting for Oblivion to be delivered before I built. I'm running into some PCB issues. Many of the keys do not work out of the box. This includes almost the entire caps lock row except the caps lock key, the number 5, and the two keys above the badge. Out of the box some of the keys were mapped to the incorrect action. I read an earlier comment describing a similar issue but couldn't find any other information on similar problems on Discord. I have flashed the firmware to the default think6.5 hotswap layout in QMK toolbox. The only effect that had was to fix the incorrect mappings. It didn't fix the keys that aren't doing anything. I'm a complete novice with QMK and custom builds so it very possible I'm missing a critical step but would appreciate any help. Thanks for your time.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: mxgian99 on Fri, 10 January 2020, 10:26:25
IIRC, the issue with the dead keys on caps lock row is due to a diode that is flipped the wrong way.  look at the diode for caps lock or the one right next to it and see if its flipped from the other ones.

unfortunately to fix this you need to desolder the diode and resolder it flipped, if you cant do that you should try reaching out to your local keeb community to see if someone can help.  or find a good cell phone repair shop that does PCB repair. 
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: ziggs on Fri, 10 January 2020, 10:28:03
I would join the Discord and check the pinned messages for more information. The short version is this happened to a lot of people (including me), it sounds like your caps lock diode is backwards. I'm assuming the hotswap sockets for the other 3 keys might need a reflow. I would also make sure to cycle led modes when you can to make sure you don't have any LED issues.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: Moridin on Fri, 10 January 2020, 10:28:56
Also, you can email Potter and get a replacement PCB. Easier to resolder.
Title: Re: [GB] Think6.5° | 65% Custom Keyboard (PC/Alu 99% shipped, Brass shipping soon)
Post by: Hell-es on Fri, 10 January 2020, 13:11:40
Also, you can email Potter and get a replacement PCB. Easier to resolder.
or at least hope to get the pcb ... have the same issue here and still wait for the promised replacement