Looking good :thumb: Site seems to be down
Site down here too :/
Copped
Been looking fwd to this one :) Looking forward to receiving mine!
Managed to order one last minutes! I have experience pad soldering so it will be interesting to build.
I hope someone will create a acrylic cut high profile case for this lovely project and better yet have it open source like how CTFKB has done for the discipline 65.
Sent from my iPhone using Tapatalk
I’m very hype... it’s wish come true for me with the high pro case. Thank you for the effort!Managed to order one last minutes! I have experience pad soldering so it will be interesting to build.
I hope someone will create a acrylic cut high profile case for this lovely project and better yet have it open source like how CTFKB has done for the discipline 65.
Sent from my iPhone using Tapatalk
Thank you so much! The response from the community has been amazing. In the last weeks I've designed a high-pro case already and it will go into testing sometime next week. Eventually I will open the case and pcb files. Take care!
I’m very hype... it’s wish come true for me with the high pro case. Thank you for the effort!Managed to order one last minutes! I have experience pad soldering so it will be interesting to build.
I hope someone will create a acrylic cut high profile case for this lovely project and better yet have it open source like how CTFKB has done for the discipline 65.
Sent from my iPhone using Tapatalk
Thank you so much! The response from the community has been amazing. In the last weeks I've designed a high-pro case already and it will go into testing sometime next week. Eventually I will open the case and pcb files. Take care!
Sent from my iPhone using Tapatalk
I tend not to use oled on my keebs, thanks 2moons!
Has it already started to ship? Wow!
Extremely excited to get mine!
I’m also in for the case if there is one!
Sorry, the expected ship date is still early June. However JP Post has stopped service on all shipping to the US. The company called Kuroneko still has service to the US. I'm keeping up on all news about shipping but so far so good. PCB's are here! I'll put up a white PCB pic soon! Nearly all slice parts are ordered.
Hi-pro case/Full Case: I made a hi-pro case but it needed an adjustment. Experimenting with new acrylic cases is on hold. I am usually allowed to cut my own acrylic however the place to do that is currently not allowing people to come. Orders can be dropped off and picked up only. Until the shop reopens I can't finish making a hi-pro case. I'm still expecting that before the GB ships in early June that I'll be able finish my case design. Cheers and stay safe all.
Hi 2Moons, I want to buy a custom cable from Zap Cables. How would the 15% discount work? I didn’t receive any code from the purchase confirmation.
Sent from my iPhone using Tapatalk
Excited to see the white pcbs when you get a chance to upload a pic!! Also just curious why the wait on ordering the acrylic? No idea how this operates so just genuinely curious.
Thanks again 2Moons! Hope we can keep the ship date and you're staying healthy :)
Acrylic ordered from a company in Japan. White PCB up! Turned out great though I'd recommend some flux cleaner for this one.The non-RGB slice still supports backslash and tilda in place of the 2U backspace key (top right corner)?Show Image(https://i.imgur.com/d9qyuWS.jpg)Show Image(https://i.imgur.com/n9jxvOr.jpg)
Acrylic ordered from a company in Japan. White PCB up! Turned out great though I'd recommend some flux cleaner for this one.The non-RGB slice still supports backslash and tilda in place of the 2U backspace key (top right corner)?Show Image(https://i.imgur.com/d9qyuWS.jpg)Show Image(https://i.imgur.com/n9jxvOr.jpg)
Can't believe I missed this. Will there be extras or will you be running another GB? I've recently reached out to to the creator of the NAKED64SF and he just got his new revision in (2 encoder knobs). Beautiful choice!
Yass! Hi Pro case, please!Can't believe I missed this. Will there be extras or will you be running another GB? I've recently reached out to to the creator of the NAKED64SF and he just got his new revision in (2 encoder knobs). Beautiful choice!
Yep there will be extras of both versions and in both colors. After I can go test again, I should have a hi-pro case available after some more testing.
Slice orders are being kitted and they will be shipped out starting next week! :)
SHIPPING: Shipping to many countries is now more expensive than initially thought, but it's taken care of. All US orders will be shipped UPS. If there is any problem shipping to your country, you'll be contacted individually. The way some orders are being shipped you may incur a customs fee, there is nothing I can do about it, and you'll need to pay it. Thanks for your understanding regarding customs fees.
Slice Hi-Pro has also finished and can be cut right away. Here are some rough pictures of the case, more to come soon. If you are interested in one, please PM me.
This has 2x 3mm acrylic pieces to tilt the case towards the user. Followed by a 3mm backplate, 3x 3mm surrounding acrylic pieces, 3mm switch plate, 2x 3mm surrounding top plates.
The highest top plate encloses the pro micro and oled to protect it from dust.
SLICE RGB USERS: Two noteworthy items. The OLED pins will need to be removed and replaced. I will have a ez mode guide on how to accomplish this with just a cutters and a soldering iron. Also, If you decide that you do not want to use the OLED Displays, you will need to use the QMK command line to disable OLED. If you don't do this the polling rate will be incorrect causing a delayed like response. OLED is turned on by default in QMK. If you would like your Pro Micros setup before shipping, please PM me directly.Show Image(https://i.imgur.com/fovOKLs.jpg)Show Image(https://i.imgur.com/uithGjc.jpg)Show Image(https://i.imgur.com/uB0WRia.jpg)
Thanks, yes I've been asked to release the plate files. There is an aluminum case in the works, so after that I'll release all files. Stay tuned.Slice orders are being kitted and they will be shipped out starting next week! :)
SHIPPING: Shipping to many countries is now more expensive than initially thought, but it's taken care of. All US orders will be shipped UPS. If there is any problem shipping to your country, you'll be contacted individually. The way some orders are being shipped you may incur a customs fee, there is nothing I can do about it, and you'll need to pay it. Thanks for your understanding regarding customs fees.
Slice Hi-Pro has also finished and can be cut right away. Here are some rough pictures of the case, more to come soon. If you are interested in one, please PM me.
This has 2x 3mm acrylic pieces to tilt the case towards the user. Followed by a 3mm backplate, 3x 3mm surrounding acrylic pieces, 3mm switch plate, 2x 3mm surrounding top plates.
The highest top plate encloses the pro micro and oled to protect it from dust.
SLICE RGB USERS: Two noteworthy items. The OLED pins will need to be removed and replaced. I will have a ez mode guide on how to accomplish this with just a cutters and a soldering iron. Also, If you decide that you do not want to use the OLED Displays, you will need to use the QMK command line to disable OLED. If you don't do this the polling rate will be incorrect causing a delayed like response. OLED is turned on by default in QMK. If you would like your Pro Micros setup before shipping, please PM me directly.Show Image(https://i.imgur.com/fovOKLs.jpg)Show Image(https://i.imgur.com/uithGjc.jpg)Show Image(https://i.imgur.com/uB0WRia.jpg)
any chance for the high profile case files to be released? hope to get in on extras
The build guide was updated with a preliminary guide on replacing OLED display pins to the low profile ones provided in the kit. I will take pictures to go along with the guide tonight or tomorrow.I’m ready for those extras:), I was wondering how long shipping to the US takes btw? Thank you
https://www.basekeys.com/category/build-guides/ (https://www.basekeys.com/category/build-guides/)
Also nearly all Slices have been shipped!!!! Happy building everyone! Extras will come up soon!
The build guide was updated with a preliminary guide on replacing OLED display pins to the low profile ones provided in the kit. I will take pictures to go along with the guide tonight or tomorrow.I’m ready for those extras:), I was wondering how long shipping to the US takes btw? Thank you
https://www.basekeys.com/category/build-guides/ (https://www.basekeys.com/category/build-guides/)
Also nearly all Slices have been shipped!!!! Happy building everyone! Extras will come up soon!
Are you going to release the file for the case? I’m reluctant to start building my kit without the case. Thanks.
Are you going to release the file for the case? I’m reluctant to start building my kit without the case. Thanks.
Sent from my iPhone using Tapatalk