Author Topic: [IC] Noxary 268.1 (Read 34962 times)

xondat · « **on:** Sun, 17 September 2017, 15:05:02 »

This is my 2nd creation following on from X60. Everything is different if I compare the two boards directly, but the philosophy is still the same: 8 degrees angle, top mount, and a simple silhouette. I started with two main goals of decreasing the bezel size and making the plate lower to the desk. I believe I've gone to the maximum that's possible with the material, and not much could be improved without sacrificing structural integrity. Hopefully it's worth the hundreds of hours that's gone into this project.

The buy will begin shortly after I receive the sample (about 3 weeks away).

Case Information:

6061 Aluminum
8 Degrees Angle
Brass Weight with Engravings
Thinnest Top Mount Bezels (4.6/3mm)
Lowest Plate to Desk (7.7mm)
Optional .5u Blocker

Supported Layouts:

68 key may change. To put it simply, it will be the layout I want to use.

Plates:

Top Mounted Plate with Switch Opening
Universal or 68 Key Plate
Clear Polycarbonate, Anodized Aluminum, or Polished Brass
Partial Polycarbonate 68 Key Available

PCB:

Custom QMK PCB by Rozakiin
Presoldered Controller, Diodes & Resistors
Mini USB
Interchangable For winkeyless.kr 22mini

268 AG:

Limited to 22 Units
Anodizing or Cerakoting
Brass Through Weight with Individual Numbering
Polycarbonate, Brass, or Aluminium Plate

Cerakoting is likely to add $50 or so to the case price.

268:

20 Units
Dark Gray or Silver Case
Brass Through Weight
Polycarbonate, Brass, or Red Aluminium Plate

Price (excluding fees + shipping):

Case (Top/Weight/Bottom) - $320
Plate - $30
PCB - $30

Shipping:

I'll be shipping with DHL Express again, with most packages taking 1-3 days for a good price. I'll be shipping from the United Kingdom; local taxes and fees apply. Estimates for shipping are as follows: United States - $40; United Kingdom - $20; Europe - $30-35; Asia - $50-60.

Deadline & Lead Times:

I'll allow 1 week after starting for payment. After this, the order can be submitted to the factory and will take about 6-8 weeks to arrive.

Thanks for reading. If you have any questions, please feel free to ask them. Thanks.

gnmar2723 · « **Reply #1 on:** Sun, 17 September 2017, 15:07:42 »

2017 sure is the year of the 65%

Best of luck on this Xondat! I really like the style of your other boards

avid · « **Reply #2 on:** Sun, 17 September 2017, 15:08:50 »

Yeah this layout seems super popular now!

joey · « **Reply #3 on:** Sun, 17 September 2017, 15:10:18 »

Looks nice, good luck!

amnesia0287 · « **Reply #4 on:** Sun, 17 September 2017, 15:22:36 »

Ooo. Doo want. FCFS or Raffle? I want AG but would buy either. Been dying for a nice 65%.

hayt · « **Reply #5 on:** Sun, 17 September 2017, 15:26:43 »

Looks great Xondat! Love this layout, I'm very tempted

pixelpusher · « **Reply #6 on:** Sun, 17 September 2017, 15:26:48 »

Looks great. Interested in that Cerakote. Any more info about the colors available?

VicareyG · « **Reply #7 on:** Sun, 17 September 2017, 15:37:30 »

I Need this! It looks so nice

tireddoctor · « **Reply #8 on:** Sun, 17 September 2017, 17:15:48 »

A million times Yes! But I hope it is done in large enough quantity so some of us can get in.

poolside · « **Reply #9 on:** Sun, 17 September 2017, 17:22:28 »

Nice weight design on the AG

Oh and filleted edges. They feel smoother under the finger.
Will brass plates be offered in future rounds of the L? Gotta be quick if you want one.

xondat · « **Reply #10 on:** Sun, 17 September 2017, 17:40:07 »

Thanks for the support everyone

Quote from: Amnesia on Sun, 17 September 2017, 15:22:36

Ooo. Doo want. FCFS or Raffle? I want AG but would buy either. Been dying for a nice 65%.

I will probably do FCFS, not sure there is enough demand to bother with raffle.

Quote from: reececonrad on Sun, 17 September 2017, 15:26:48

Looks great. Interested in that Cerakote. Any more info about the colors available?

Plan to offer as many colors as possible with the AG, I want to offer lots of freedom with the builds.

Quote from: tireddoctor on Sun, 17 September 2017, 17:15:48

A million times Yes! But I hope it is done in large enough quantity so some of us can get in.

Well now there are 42, which might be enough. If not, I can do more runs of 268L.

Quote from: poolside on Sun, 17 September 2017, 17:22:28

Nice weight design on the AG
Oh and filleted edges. They feel smoother under the finger.
Will brass plates be offered in future rounds of the L? Gotta be quick if you want one.

Thanks! Yeah it should feel smoother. I think it looks nicer and makes it look even thinner.

Not too sure. I might offer it for this round, but still have to consider costs and ultimately whether it's different enough from aluminum. I'll build identical boards, just different plate material, and see whether it's worth it.

nmur · « **Reply #11 on:** Sun, 17 September 2017, 17:44:46 »

awesome brass weight design dude

skidude9678 · « **Reply #12 on:** Sun, 17 September 2017, 17:50:04 »

Count me in

iamtootallforthis · « **Reply #13 on:** Sun, 17 September 2017, 17:54:49 »

Interested

frostbyte-gaming · « **Reply #14 on:** Sun, 17 September 2017, 18:29:45 »

Definitely interested, love the 68 key and I have been interested in trying out a polycarbonate plate. Also will we be able to order extra plates and pcbs to go with the case?

xondat · « **Reply #15 on:** Sun, 17 September 2017, 18:32:49 »

Quote from: frostbyte-gaming on Sun, 17 September 2017, 18:29:45

Definitely interested, love the 68 key and I have been interested in trying out a polycarbonate plate. Also will we be able to order extra plates and pcbs to go with the case?

Of course. Prices are listed separately so that you can work it out depending on what you'd want

tuba section · « **Reply #16 on:** Sun, 17 September 2017, 18:45:43 »

Really looking forward to this! Love the thin bezels and the AG weight design. Most of all I love the simplicity of the Noxary boards so far. Great stuff Xondat

breckstar · « **Reply #17 on:** Sun, 17 September 2017, 19:31:36 »

Cerakoting white? In for sure if possible

ns90 · « **Reply #18 on:** Sun, 17 September 2017, 19:42:20 »

I keep saying I don't need more 65% boards since I prefer 60%, but then I keep seeing these beautiful boards, so I guess I'm in!

ihalatch · « **Reply #19 on:** Sun, 17 September 2017, 22:08:15 »

Very interested. When?

DALExSNAIL · « **Reply #20 on:** Sun, 17 September 2017, 23:01:23 »

Looking good boi, gl

If I didn't already have 65% I'd be all over it!

Delirious · « **Reply #21 on:** Sun, 17 September 2017, 23:49:14 »

If that is indeed the pcb I'll be in for alps. Will you release the plate dimension and such so I can design my own alps plate?

RevoTeam · « **Reply #22 on:** Mon, 18 September 2017, 00:00:41 »

This is looking good. Good luck,man

Strontaap · « **Reply #23 on:** Mon, 18 September 2017, 00:09:57 »

Oh, snap. Yes please!

ArchDill · « **Reply #24 on:** Mon, 18 September 2017, 00:54:33 »

marre259 · « **Reply #25 on:** Mon, 18 September 2017, 04:29:54 »

Just want to confirm this doesn't support 1.25 1.25 1.25 6.25 1.5 1.5 bottom row?

Edit: nvm i'm dumb

Calza · « **Reply #26 on:** Mon, 18 September 2017, 05:08:21 »

Count me in!

finalarcadia · « **Reply #27 on:** Mon, 18 September 2017, 07:00:38 »

Count Me In

xondat · « **Reply #28 on:** Mon, 18 September 2017, 07:09:36 »

Thanks again for the support, can't wait to receive and show the prototype to everyone.

Quote from: ihalatch on Sun, 17 September 2017, 22:08:15

Very interested. When?

Shortly after I receive the sample which will be in 2.5-3 weeks.

Quote from: Delirious on Sun, 17 September 2017, 23:49:14

If that is indeed the pcb I'll be in for alps. Will you release the plate dimension and such so I can design my own alps plate?

I'm not sure I'd officially support it, but I'd be happy to work with someone in getting an Alps plate if they really wanted it.

Quote from: marre259 on Mon, 18 September 2017, 04:29:54

Just want to confirm this doesn't support 1.25 1.25 1.25 6.25 1.5 1.5 bottom row?

Edit: nvm i'm dumb

It does

)

avid · « **Reply #29 on:** Mon, 18 September 2017, 07:26:22 »

Curious what's happening with the super fast GBs. Normal seems at least +6 months. Is 6-8 weeks to arrive for completed keyboard?
Is it because you already done prototype? Also curious about the anodization, will it look simular to x60 boards?

xondat · « **Reply #30 on:** Mon, 18 September 2017, 07:49:19 »

Quote from: avid on Mon, 18 September 2017, 07:26:22

Curious what's happening with the super fast GBs. Normal seems at least +6 months. Is 6-8 weeks to arrive for completed keyboard?
Is it because you already done prototype? Also curious about the anodization, will it look simular to x60 boards?

6-8 weeks is the time I'm allowing for the manufacturer to make and ship. Using the lead times on the quotes, and how long the sample will take, it should be plenty. Of course I can't predict the future, but the design is set and it will be a case of asking for x numbers of parts and waiting.

The sample already being in production, and not starting the buy before receiving it will make the wait look quite a bit shorter for participants, so I guess it helps.

Anodizing should be like the Fjell and Klippe. Anodizing does vary per batch, but the factory have shown good work so far. There are many great pictures of the Fjell around, and hopefully the Klippe soon. Here are a couple:

Credit to leandren and fausuto.

hayt · « **Reply #31 on:** Mon, 18 September 2017, 08:03:54 »

Quote from: xondat on Mon, 18 September 2017, 07:49:19

Quote from: avid on Mon, 18 September 2017, 07:26:22
Curious what's happening with the super fast GBs. Normal seems at least +6 months. Is 6-8 weeks to arrive for completed keyboard?
Is it because you already done prototype? Also curious about the anodization, will it look simular to x60 boards?

6-8 weeks is the time I'm allowing for the manufacturer to make and ship. Using the lead times on the quotes, and how long the sample will take, it should be plenty. Of course I can't predict the future, but the design is set and it will be a case of asking for x numbers of parts and waiting.

The sample already being in production, and not starting the buy before receiving it will make the wait look quite a bit shorter for participants, so I guess it helps.

Anodizing should be like the Fjell and Klippe. Anodizing does vary per batch, but the factory have shown good work so far. There are many great pictures of the Fjell around, and hopefully the Klippe soon. Here are a couple:

Show Image

Show Image

Credit to leandren and fausuto.

Wow, that is one badass chamfer!

Murrellz · « **Reply #32 on:** Mon, 18 September 2017, 09:11:19 »

After missing out on the TGR910-CE, I'm definitely interested in this!

Softkore · « **Reply #33 on:** Mon, 18 September 2017, 10:39:57 »

I am extremely interested in this beautiful case... Would look lovely alongside my Fjell R1.

jerue · « **Reply #34 on:** Mon, 18 September 2017, 18:41:53 »

This looks wonderful, I hope I am able to get a 268L during the initial run!

ctzn_voyager · « **Reply #35 on:** Mon, 18 September 2017, 19:17:25 »

xondat · « **Reply #36 on:** Tue, 19 September 2017, 10:25:07 »

What do people think of cerakoting? I want to offer it but I think it'll be too complex, and of course it's added choice as it's not done at the factory.

I'll also post a pre-engraving picture of the 268L weight later

pixelpusher · « **Reply #37 on:** Tue, 19 September 2017, 10:40:33 »

Quote from: xondat on Tue, 19 September 2017, 10:25:07

What do people think of cerakoting? I want to offer it but I think it'll be too complex, and of course it's added choice as it's not done at the factory.

I'll also post a pre-engraving picture of the 268L weight later

I wanted cerakote so I could get beige. I've always wanted a high quality beige case. But if you don't have a manufacturer who you know can do a great job, we'd probably be safer to go without the option.

Why don't people make nice quality custom ABS cases? Still hoping one day someone will

xondat · « **Reply #38 on:** Tue, 19 September 2017, 10:59:50 »

Quote from: reececonrad on Tue, 19 September 2017, 10:40:33

Quote from: xondat on Tue, 19 September 2017, 10:25:07
What do people think of cerakoting? I want to offer it but I think it'll be too complex, and of course it's added choice as it's not done at the factory.

I'll also post a pre-engraving picture of the 268L weight later

I wanted cerakote so I could get beige. I've always wanted a high quality beige case. But if you don't have a manufacturer who you know can do a great job, we'd probably be safer to go without the option.

Why don't people make nice quality custom ABS cases? Still hoping one day someone will

Oh that's a good point.

When I said too complex, I mean logistically. I think it'd probably be worth it for those that want it? The quality looks good, I'll have to try and get some pictures.

Harms · « **Reply #39 on:** Tue, 19 September 2017, 18:16:56 »

The silver case with brass plate would look amazing.

euphxenos · « **Reply #40 on:** Tue, 19 September 2017, 23:44:28 »

Is there any chance you could offer it in navy blue (whether that's anodized or cerakote)? I'm looking for a navy blue 65% to go with GMK Nautilus.

Troif · « **Reply #41 on:** Wed, 20 September 2017, 06:41:01 »

Eoww! I want one. It seems incredible!

Sent from my iPhone using Tapatalk

Marutks · « **Reply #42 on:** Wed, 20 September 2017, 06:48:36 »

I am in! I want Dark Gray or black case. I would be interested in NAVY BLUE, too.

xondat · « **Reply #43 on:** Wed, 20 September 2017, 07:03:58 »

Quote from: euphxenos on Tue, 19 September 2017, 23:44:28

Is there any chance you could offer it in navy blue (whether that's anodized or cerakote)? I'm looking for a navy blue 65% to go with GMK Nautilus.

Quote from: Marutks on Wed, 20 September 2017, 06:48:36

I am in! I want Dark Gray or black case. I would be interested in NAVY BLUE, too.

Well you're in luck because I'd also like a navy blue case. I'll be trying to organize it when it's time

Quote from: Troif on Wed, 20 September 2017, 06:41:01

Eoww! I want one. It seems incredible!

Thanks

Quote from: Harms on Tue, 19 September 2017, 18:16:56

The silver case with brass plate would look amazing.

I agree. I haven't tried brass as a plate yet, so looking forward to that too.

Minor update today; Rozakiin received the first revision PCBs and will be sending one to me soon for test fitting. I'll get a couple pictures up when I can.

theillumedpanda · « **Reply #44 on:** Wed, 20 September 2017, 08:06:28 »

Looks very appealing! Shame I missed your last GB and couldn't really get my hands on an unbuilt kit. Hopefully I'll make it this time

skidude9678 · « **Reply #45 on:** Wed, 20 September 2017, 19:59:32 »

South facing LEDs, correct? If I'm lucky enough to get one I'd like to put tealios and zealencios with a GMK set on this.

xondat · « **Reply #46 on:** Wed, 20 September 2017, 20:29:46 »

Quote from: skidude9678 on Wed, 20 September 2017, 19:59:32

South facing LEDs, correct? If I'm lucky enough to get one I'd like to put tealios and zealencios with a GMK set on this.

Yup, on the south side!

ihalatch · « **Reply #47 on:** Wed, 20 September 2017, 22:14:37 »

Is it possible to put a very thin acrylic diffuser in the seam between the tot and bottom parts for those who wishe? In my opinion it looks better, somehow masking the tiny gap.

amnesia0287 · « **Reply #48 on:** Wed, 20 September 2017, 22:28:17 »

Sooooo... when can I give you money

xondat · « **Reply #49 on:** Thu, 21 September 2017, 08:19:43 »

Quote from: ihalatch on Wed, 20 September 2017, 22:14:37

Is it possible to put a very thin acrylic diffuser in the seam between the tot and bottom parts for those who wishe? In my opinion it looks better, somehow masking the tiny gap.

Nope. Since the PCB is attached to the top piece, and the USB hole is on the bottom piece, any added thickness would mean they don't line up. Besides that point, diffusers and LEDs are ugly

Quote from: Amnesia on Wed, 20 September 2017, 22:28:17

Sooooo... when can I give you money

8th of October or so?

News:

Author Topic: [IC] Noxary 268.1 (Read 34962 times)