That is quite a price tag.
If you miss something plz resubmit and sign it finally
Well, submitted a form for HHKB teal/black/teal w/ silver plate. I'll worry about consolidating the money later.
Normally don't like 60, but the design for this board has really grown on me. That teal is one of the best colors I've seen a board done in.
Well, submitted a form for HHKB teal/black/teal w/ silver plate. I'll worry about consolidating the money later.
Normally don't like 60, but the design for this board has really grown on me. That teal is one of the best colors I've seen a board done in.
Keyboards & Co?
You mentioned in the IC that Rose Gold was offered. Do I select MAO and type in Rose Gold?
You mentioned in the IC that Rose Gold was offered. Do I select MAO and type in Rose Gold?
Looks like rose gold wasnt picked. The point of the IC was to choose what 5 colors were being offered. Rose Gold seems to not be one of them.
Can you explain the assembly package? I did not see any switch or LED options.
teal/blue/teal with brass everything else will looks nice!
A few questions:
Are there photos of how MAO compares to plain silver?
The name plates in this photo set https://imgur.com/gallery/PVgSp seem to use different fonts, can I send you a vector file or specify a font, or is that font obligatory?
A few questions:
Are there photos of how MAO compares to plain silver?
The name plates in this photo set https://imgur.com/gallery/PVgSp seem to use different fonts, can I send you a vector file or specify a font, or is that font obligatory?
Sorry if I am missing it, but is there an image of what the founders edition will look like? I'd like to see what the brass top looks like
Sorry if I am missing it, but is there an image of what the founders edition will look like? I'd like to see what the brass top looks like
Simone have modify this combo ;)
A few questions:
Are there photos of how MAO compares to plain silver?
The name plates in this photo set https://imgur.com/gallery/PVgSp seem to use different fonts, can I send you a vector file or specify a font, or is that font obligatory?
From the album:
Silver:Show Image(https://i.imgur.com/zxCnor3.jpg)
MAO (It's more grey than this in person from what I've heard)Show Image(https://i.imgur.com/PKy3Gta.jpg)
I'd highly recommend anodized aluminum over MAO for this keyboard, at least with this new (dark) green and blue that i currently have on hand.
The anodising on this thing is miles miles better than the E8 and feels super smooth IRL. Here's just a ****ty shot of the alu surface and i don't think it does the board justice at all.
https://c1.staticflickr.com/5/4720/39782151684_4495e2324b_o.jpg
Edit: oh and to avoid confusion this is NOT the dark blue that will be used for the GB, its just a 'regular blue' prototype :thumb:
A few questions:
Are there photos of how MAO compares to plain silver?
The name plates in this photo set https://imgur.com/gallery/PVgSp seem to use different fonts, can I send you a vector file or specify a font, or is that font obligatory?
From the album:
Silver:Show Image(https://i.imgur.com/zxCnor3.jpg)
MAO (It's more grey than this in person from what I've heard)Show Image(https://i.imgur.com/PKy3Gta.jpg)
Puddsy, thanks for your reply to my question in the IC regarding MAO vs anodizing. It was very helpful. I know it's been mentioned that the MAO is gray-ish in real life, but I'm wondering if it's more gray or more white. I put in an order for the MAO top and bottom case, but now I'm second guessing that choice after seeing a couple pictures (maybe bad lighting?).I'd highly recommend anodized aluminum over MAO for this keyboard, at least with this new (dark) green and blue that i currently have on hand.
The anodising on this thing is miles miles better than the E8 and feels super smooth IRL. Here's just a ****ty shot of the alu surface and i don't think it does the board justice at all.
https://c1.staticflickr.com/5/4720/39782151684_4495e2324b_o.jpg
Edit: oh and to avoid confusion this is NOT the dark blue that will be used for the GB, its just a 'regular blue' prototype :thumb:
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Personally, I like the color options that ano offers more.
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Personally, I like the color options that ano offers more.
Yeah, definitely loving the color combinations for the ano. I've been wanting a white/brass build for a while now though, which is why I was initially interested in the MAO. Too bad there isn't an option for ano white this time around.
Still kind of flip-flopping between if I want to change from MAO to the teal.
I really wanted a blank weight but forgot to write it in the form. Is this an option only if an extra weight is purchased? I don't want to bother you with custom engravings so I figured getting a blank one and finding a shop locally would be best.
I'd highly recommend anodized aluminum over MAO for this keyboard, at least with this new (dark) green and blue that i currently have on hand.
The anodising on this thing is miles miles better than the E8 and feels super smooth IRL. Here's just a ****ty shot of the alu surface and i don't think it does the board justice at all.
https://c1.staticflickr.com/5/4720/39782151684_4495e2324b_o.jpg
Edit: oh and to avoid confusion this is NOT the dark blue that will be used for the GB, its just a 'regular blue' prototype :thumb:
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Anyone have silver AND mao components from R1 that they can photo together. Trying to see how they look together.
Anyone have silver AND mao components from R1 that they can photo together. Trying to see how they look together.
Anyone have silver AND mao components from R1 that they can photo together. Trying to see how they look together.
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Personally, I like the color options that ano offers more.
Yeah, definitely loving the color combinations for the ano. I've been wanting a white/brass build for a while now though, which is why I was initially interested in the MAO. Too bad there isn't an option for ano white this time around.
Still kind of flip-flopping between if I want to change from MAO to the teal.
white ano is just a really bright silver, you can't ano true white
I'd highly recommend anodized aluminum over MAO for this keyboard, at least with this new (dark) green and blue that i currently have on hand.
The anodising on this thing is miles miles better than the E8 and feels super smooth IRL. Here's just a ****ty shot of the alu surface and i don't think it does the board justice at all.
https://c1.staticflickr.com/5/4720/39782151684_4495e2324b_o.jpg
Edit: oh and to avoid confusion this is NOT the dark blue that will be used for the GB, its just a 'regular blue' prototype :thumb:
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
yeah the texture is different. And MAO is super matte, like superdoedoe said it feels like dry ceramic. Also its much more prone to dirt and finger oil than anodized alu, one of the advantages is that mao finish is usually very consistent and doesn't suffer from the defects often seen on anodized alu.
For this board I personally prefer ano as it looks and feels so good :thumb:. That dark blue/mao combo looks really awesome though.
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
Personally, I like the color options that ano offers more.
Yeah, definitely loving the color combinations for the ano. I've been wanting a white/brass build for a while now though, which is why I was initially interested in the MAO. Too bad there isn't an option for ano white this time around.
Still kind of flip-flopping between if I want to change from MAO to the teal.
white ano is just a really bright silver, you can't ano true white
Ahh ok. Didn't know that. Well I hope I made the right choice going MAO :))I'd highly recommend anodized aluminum over MAO for this keyboard, at least with this new (dark) green and blue that i currently have on hand.
The anodising on this thing is miles miles better than the E8 and feels super smooth IRL. Here's just a ****ty shot of the alu surface and i don't think it does the board justice at all.
https://c1.staticflickr.com/5/4720/39782151684_4495e2324b_o.jpg
Edit: oh and to avoid confusion this is NOT the dark blue that will be used for the GB, its just a 'regular blue' prototype :thumb:
Out of curiosity, why the anodized over MAO? I know they're different finishes, but the texture is different isn't it?
yeah the texture is different. And MAO is super matte, like superdoedoe said it feels like dry ceramic. Also its much more prone to dirt and finger oil than anodized alu, one of the advantages is that mao finish is usually very consistent and doesn't suffer from the defects often seen on anodized alu.
For this board I personally prefer ano as it looks and feels so good :thumb:. That dark blue/mao combo looks really awesome though.
I do like the feel of matte ceramic. From the some pictures with certain lighting the MAO looks super white and beautiful, but I'm more curious to know if it's more of a true white or an off white bordering gray. The ano on this board does looks really great though. Still kind of torn between if I want white or that teal.
Thinking about getting in on this GB. I want to get a good color combo to match XDA Godspeed, any color suggestions?
I will sort the table next days and let you check it . :thumb:
No red color this time? :rolleyes:
No red color this time? :rolleyes:
Sry this time was no red
No red color this time? :rolleyes:
Sry this time was no red
Roger, thanks! and no carbon fiber plate either correct? :P
No red color this time? :rolleyes:
Someone told me he can’t afford it
Emm if you really like this board you can purhanse one and pay it later
Someone told me he can’t afford it
Emm if you really like this board you can purhanse one and pay it later
It will have deadline also this will be last chance get this board .wont open again
ThanksShow Image(https://i.imgur.com/yGAAhFG.jpg)Show Image(https://i.imgur.com/bZXEO98.jpg)
Conflicted about whether to go with PC or brass plate on this one. I plan on using slient blacks and prefer not too harsh of a bottom out to try and be as quiet as possible. Any advice?
Also not sure to get brass or PC. The brass looks fkin amazing but my previous PC plate was pretty good too D:
Tactile PC anyone?
Also not sure if I should get an extra PCB....
Also not sure to get brass or PC. The brass looks fkin amazing but my previous PC plate was pretty good too D:
Tactile PC anyone?
Also not sure if I should get an extra PCB....
I’ve tried PC plates a few times and do like them for tactile switches. However, if you’re on the fence, I am almost done building my R1 E6-V2 and Exclusive’s brass plate is one of the nicest I’ve ever used. It is heavy and solid and has a nice matte finish to it. It’s extremely tasty. Plus, for longevity’s sake, PC is brittle and I’ve broken one when pulling switches.
@exclusive how to make a rockets board with no redOh Talley
Sent from my Pixel 2 XL using Tapatalk
How many orders need red color !!!
I need to know
You the man exclusive :)@exclusive how to make a rockets board with no redOh Talley
Sent from my Pixel 2 XL using Tapatalk
Emmm there may need Red
How many orders need red color !!!
I need to know
How many orders need red color !!!
I need to know
:-X
Tally810, pon10, ullr, fatpolomanjr (me). By my count. I'm in 100% with red middle case. 200% with red plate (but I know there are only 3 plate colors haha). ;p
Possibly green middle if it is bright enough to match:
GreenShow Image(https://farm5.staticflickr.com/4714/24846515867_fc2a30e2e5_z.jpg)
RedShow Image(https://i.imgur.com/oLXvxOR.jpg)
How many orders need red color !!!
I need to know
:-X
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re. 6 by my count. I'm in 100% with red middle case. 200% with red nameplate (but I know there are only 3 plate colors haha). ;p
Wait . It seems ppl like rainbow color .thanks exclusive
Permit red then will ask purple :mad: :mad:
How many orders need red color !!!
I need to know
Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!OMG. why you are feel bad on me .. :-\
I need to know
Current count: 8
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz.
Puddsy (plate).
Haha, just because it might complicate the orders, especially if people cancel and redo. Then order random red top/middle/bottom cases, ask for nameplate and plate, etc. I remember you saying how hard it was to deal with having the option for usb on left and middle. Now we want a sixth color.As you said it truly make orders mess .
Ah that's good news.Now ,is have 5 color also mao and brass options .
If you're saying adding red isn't complicated. We just need 2 more. :D
I might have to buy 2.
Ah that's good news.Now ,is have 5 color also mao and brass options .
If you're saying adding red isn't complicated. We just need 2 more. :D
I might have to buy 2.
we still need add red + purple /?
Show Image(https://i.imgur.com/6vr8EB2.jpg)
Here is pic due to the light
Color become more white
Exclusive will there be an order check? I may want to change my PCB option.
Too bad Apple White Silver is not offered in this round.
Sent from my PH-1 using Tapatalk
Exclusive will there be an order check? I may want to change my PCB option.
Exclusive will there be an order check? I may want to change my PCB option.
Today
Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!
I need to know
Current count: 10
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz, kuang2, kuang2.
Puddsy (plate).
Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!
I need to know
Current count: 10
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz, kuang2, kuang2.
Puddsy (plate).
Come
changed! check.Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!
I need to know
Current count: 10
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz, kuang2, kuang2.
Puddsy (plate).
Come
If I want to change my other colors but also want red do I resubmit or tell you here?
Would like Black-Red-Black with PC plate
changed! check.Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!
I need to know
Current count: 10
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz, kuang2, kuang2.
Puddsy (plate).
Come
If I want to change my other colors but also want red do I resubmit or tell you here?
Would like Black-Red-Black with PC plate
changed! check.Are you interested in the red color? I can add your name to the list. If anyone needs to make a change to their colors I'm guessing that you should pm excluisve to remove your previous entry then re-enter. I don't know about other new colors besides red. Even adding just red seems pretty complicated. I feel bad for excluisve now (but I still really want it).How many orders need red color !!!
I need to know
Current count: 10
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re, Ryu_Dragoon, bminhz, kuang2, kuang2.
Puddsy (plate).
Come
If I want to change my other colors but also want red do I resubmit or tell you here?
Would like Black-Red-Black with PC plate
Entered! Red and black middle, nameplate, and plate. Black top/bottom. This is going to be a lot of $$ for all the extras I want, but so worth it!Correct thanks dude
I think tally810 wanted red top/bottom case with brass middle. To match the Houston Rockets' team colors. Not sure about others.
:confused:Here is MAO vs Silver white (not E6, but same color IRL).
https://imgur.com/kmroQKB
About red color, i may order 2 for Vietnamese which not join the form, so 10 is possible
If you are going to add a red option I would like to add a red middle plate to my order!
I might very well be interested in red middle, would like a red nameplate if possible.
I am up for red too...thinking it could very well together with the dark blue
Mentioned before, I would like to add a red middle and red nameplate aswell!
Last chance and there is no red anodization :(
No red color this time? :rolleyes:
How many orders need red color !!!
I need to know
:-X
Tally810, pon10, ullr, fatpolomanjr (me), ArchCel, ak_xf1re. 6 by my count. I'm in 100% with red middle case. 200% with red nameplate (but I know there are only 3 plate colors haha). ;p
Sign me up for another red one. Black and Red is the best colorway don't @ me.
I am up for red too...thinking it could very well together with the dark blue
There was not much ppl wants red CASE right ?
so allow red namtag plate middle and weight .. dont need re submit
just tell me you change !
Exclusive will there be an order check? I may want to change my PCB option.
Today
I feel like it would have been easier for excluisve if he just deleted entries and asked for resubmission when requested...Is okay someone if need modify tell me .
Ok waitExclusive will there be an order check? I may want to change my PCB option.
Today
Thanks Exclusive! Can I change my PCB to QMK? Also, I am having a hard time deciding between colors for the top and bottom case. Would it be possible to add an extra top/bottom in teal? Otherwise I'll just stick with what's on the order.
Hi exclusive, thanks for putting up the spreadsheet.Changed!
Please swap my order (line 12) to 1U BLOCK instead of HHKB. All other options keep the same.
Thanks!
I have change you PCb to qmkExclusive will there be an order check? I may want to change my PCB option.
Today
Thanks Exclusive! Can I change my PCB to QMK? Also, I am having a hard time deciding between colors for the top and bottom case. Would it be possible to add an extra top/bottom in teal? Otherwise I'll just stick with what's on the order.
Just placed my order - where do we send the custom font for the lettering on the nametag?
Thanks
If red becomes available I will 100% be getting some part redIs comes
The exact configuration depends on whether or not the name plate and plate are eligible for red anodization or just the case
Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Pm you my final order change exclusive! Thanks again :)Changed! Check
I don't see any changes on the spreadsheet.Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Oh waitI don't see any changes on the spreadsheet.Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Is ok now ?I don't see any changes on the spreadsheet.Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Is ok now ?I don't see any changes on the spreadsheet.Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Yep! Thank you. Do you have dimensions for the area of the weight that can be engraved?
i will post it tomorrow is midnight in here :-\Is ok now ?I don't see any changes on the spreadsheet.Hey Exclusive, it it's okay, i'd like to add a second Bootmapper pcb to my order and change the custom text on my extra name plate to "忍野忍"Changed !check
Yep! Thank you. Do you have dimensions for the area of the weight that can be engraved?
i will post it tomorrow is midnight in here :-\
Exclusive will there be an order check? I may want to change my PCB option.
Today
Wait a whileExclusive will there be an order check? I may want to change my PCB option.
Today
Looking forward to the updated order check with new orders placed last night.
<3Wait a whileExclusive will there be an order check? I may want to change my PCB option.
Today
Looking forward to the updated order check with new orders placed last night.
check~updated<3Wait a whileLooking forward to the updated order check with new orders placed last night.Exclusive will there be an order check? I may want to change my PCB option.
Today
Here is pic of FE weightthat looks really nice dudeShow Image(https://i.imgur.com/GKkg4eW.jpg)
the size was :160mm x 50mm
Lol :)Here is pic of FE weightthat looks really nice dudeShow Image(https://i.imgur.com/GKkg4eW.jpg)
the size was :160mm x 50mm
Sent from my Pixel 2 XL using Tapatalk
Can you do OTF for fonts, and is a mega.nz link sufficient?emn not understand it
Can you do OTF for fonts, and is a mega.nz link sufficient?emn not understand it
What’s kind of font you want give the link plz
Someone told me he can’t afford it
Emm if you really like this board you can purhanse one and pay it later
It will have deadline also this will be last chance get this board .wont open again
ThanksShow Image(https://i.imgur.com/yGAAhFG.jpg)Show Image(https://i.imgur.com/bZXEO98.jpg)
Someone told me he can’t afford it
Emm if you really like this board you can purhanse one and pay it later
It will have deadline also this will be last chance get this board .wont open again
ThanksShow Image(https://i.imgur.com/yGAAhFG.jpg)Show Image(https://i.imgur.com/bZXEO98.jpg)
Hey, just wise to know what color combination is the board from the first picture.
Also is there any special procedure for a buy from China. What I mean here is the payment and shipping coz I think it would be better for both of us to avoid PayPal and international delivery.
Thank you.
Simone have modify this combo ;)Is that Dark blue-MAO-black combo? Looks really nice
https://geekhack.org/index.php?action=dlattach;topic=94248.0;attach=189727;image
Can you do OTF for fonts, and is a mega.nz link sufficient?emn not understand it
What’s kind of font you want give the link plz
Simone have modify this combo ;)Is that Dark blue-MAO-black combo? Looks really nice
https://geekhack.org/index.php?action=dlattach;topic=94248.0;attach=189727;image
If anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.😮 Nice pictures !
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
If anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.What keyset is that Smitty? Either I don't remember it being run or I just missed it...
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
If anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.What keyset is that Smitty? Either I don't remember it being run or I just missed it...
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
If anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.What keyset is that Smitty? Either I don't remember it being run or I just missed it...
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
Sent from my Pixel 2 XL using Tapatalk
If anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.What keyset is that Smitty? Either I don't remember it being run or I just missed it...
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
Sent from my Pixel 2 XL using Tapatalk
https://kbdfans.myshopify.com/collections/keycaps/products/all-over-dye-sub-old-train-pbt-keycaps
I see pretty cool to see it done well. ThanksIf anyone is lurking in the thread and debating joining this R2 buy or not... I'm here to say shimmy down off that fence and go get you an E6-V2. Finally finished building my R1 MAO-brass-MAO board and I freaking love this thing. Please feel free to PM with any questions about the build or the board.What keyset is that Smitty? Either I don't remember it being run or I just missed it...
Teaser:Show Image(https://i.imgur.com/b2ze29Y.jpg)
Full Album: https://imgur.com/a/mp9Io (https://imgur.com/a/mp9Io)
Thanks very much Exclusive, this thing is a peach!
Sent from my Pixel 2 XL using Tapatalk
https://kbdfans.myshopify.com/collections/keycaps/products/all-over-dye-sub-old-train-pbt-keycaps
Yup, that's the one... kind of surprised how much I like it... hope there are more reverse dyesubs in the future.
should I stay or should I goListen yourself !!
Hi first pic was Mao with purple midddleSomeone told me he can’t afford it
Emm if you really like this board you can purhanse one and pay it later
It will have deadline also this will be last chance get this board .wont open again
ThanksShow Image(https://i.imgur.com/yGAAhFG.jpg)Show Image(https://i.imgur.com/bZXEO98.jpg)
Hey, just wise to know what color combination is the board from the first picture.
Also is there any special procedure for a buy from China. What I mean here is the payment and shipping coz I think it would be better for both of us to avoid PayPal and international delivery.
Thank you.
Really sorry Exclusive but can you help me addChanged!
- an extra PC PLATE and
- an extra QMK PCB
to my order midnight2903?
Don't want to regret later.... THANKS!!! :p
Yep is work.this fontCan you do OTF for fonts, and is a mega.nz link sufficient?emn not understand it
What’s kind of font you want give the link plz
https://mega.nz/#!oR0wQL7a!oNW7cQtc-xSL4eP_wvtpfX-23aacrFt-zwhDZ8FabfU
I know this is extremely overdue, but could I change my middle color to red? Or is it too late?changed!
I keep forgetting changes to the order that I’d like to make! Last change, could my name plate be changed to red as well? I’m extremely sorry exclusive
Hey excluisve, will the qmk pcb be the same as round 1 with the 32u4?, if we don't choose the assembly package will the pcb have controllers and diodes/resistors pre-soldered? and For the founders edition, there was mention of choice between both shinny polished and matte finish on the brass, will we be able to select which parts have what finish?
Hey excluisve, will the qmk pcb be the same as round 1 with the 32u4?, if we don't choose the assembly package will the pcb have controllers and diodes/resistors pre-soldered? and For the founders edition, there was mention of choice between both shinny polished and matte finish on the brass, will we be able to select which parts have what finish?
Usually when they say PCB in these keyboard kit GBs, it includes everything but the switches... Also the all FE slots are taken so no more full brass.
should I stay or should I go
How much does it weigh with brass counterweight, brass plate and brass middlepiece?All alu part weight almost 1.3 kg
All alu part weight almost 1.3 kg
with brass plate middle and weight may be 1.8 kg
All alu part weight almost 1.3 kg
with brass plate middle and weight may be 1.8 kg
Thanks.
I'm really interested in this but i will use holtites to make board hotswappable. And i would be using HHKB layout but wonder if possible to not make plate universal but only cut for HHKB layout? Maybe if i get the file and can edit it and send it to you exclusive to cut?
A few people in the form have selected all three case parts of the same color, and I’m tempted to do the same. Does anybody have any photos of one built like that?
A few people in the form have selected all three case parts of the same color, and I’m tempted to do the same. Does anybody have any photos of one built like that?Sandwich design needs colorful indeed . :)
A few people in the form have selected all three case parts of the same color, and I’m tempted to do the same. Does anybody have any photos of one built like that?Sandwich design needs colorful indeed . :)
Dumb question that I think has already been answered:
Is the HHKB layout a 6u spacebar or 7u?
Dumb question that I think has already been answered:
Is the HHKB layout a 6u spacebar or 7u?
7u
Today will start sent invoice !plz make you order sure thanks
Let us start!Today will start sent invoice !plz make you order sure thanks
Absolutely ready, just take my money :))
Thanks Exclusive
Dumb question that I think has already been answered:
Is the HHKB layout a 6u spacebar or 7u?
I have sent out all orders except all brass orders.
plz check ,
When is payment due for this?
Is the paypal [redacted]?yep my real name :-\
Fresh News ~
many ppl ask me what is the all brass finishing polish ? pvd or sandblasted.
it will be PVD shiny or pvd silver i am still need to make sure for this
it will be ensure before CNC done
Drooling at the possible prospect of an All PVD shiny Brass Case. HahaFresh News ~
many ppl ask me what is the all brass finishing polish ? pvd or sandblasted.
it will be PVD shiny or pvd silver i am still need to make sure for this
it will be ensure before CNC doneShow Image(https://i.imgur.com/RTcnkHW.jpg)
Is the paypal [redacted]?yep my real name :-\
Paid. Can't wait for my first custom board! :DWow what a great choice for your first!! Well done :)
Might be a dumb question, but does the kit come with stabs? And if not, would plate mount stabs work?Not have stab also plate not support mount stab
Might be a dumb question, but does the kit come with stabs? And if not, would plate mount stabs work?1. no
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
LolSomeone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
another thing surprised me is: seriously? are you using a plastic keeb?! come on man...
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
another thing surprised me is: seriously? are you using a plastic keeb?! come on man...
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Fresh News ~
many ppl ask me what is the all brass finishing polish ? pvd or sandblasted.
it will be PVD shiny or pvd silver i am still need to make sure for this
it will be ensure before CNC done
Hey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
Someone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Not have much extraSomeone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Holy hell. Could you show us a black top brass mid and red bottom?
Not have much extraSomeone ask me post the pic mixture different color -Show Image(https://i.imgur.com/ms4ysse.jpg)
Not too bad ..
Holy hell. Could you show us a black top brass mid and red bottom?
haha, I think he's swimming in PMs right now from those who're settling the invoices :D you guys will get a response. I know 'cos I just got mine :D
Hi, Exclusive I sent you a PM. Can you let me know if you received it? I can send it again.
Can anyone here provide dimensions on their E6-V2? Need Length, Width and Height.
Hi, Exclusive I sent you a PM. Can you let me know if you received it? I can send it again.
i am not received
I have check it nothing
Can anyone here provide dimensions on their E6-V2? Need Length, Width and Height.
Length 29 cm,
depth/width 11/12 cm (hard to get right due to the angle on the bottom)
Height 3,7(ish) cm, measured at highest point
On my R1 middle port.
I did some really weird fonts and gave google drive links to download the fonts. Is it possible to do these fonts @excluisve ?Thanks for you response
I actually didn't notice red middle as an option and I will also be changing my order to a black-red-black now.
I will resubmit if the fonts aren't possible, unless you're able to edit it for me. I'll be declining the invoice that was already sent to me since I will be changing the order. Sorry for this inconvenience :( Also, what email should I be receiving the invoice from? This can be pm'd to me since this is personal info but I want to make sure I received a legit invoice.
And can someone help me figure out pricing?
Originally, I did Dark Green - Brass - Dark Green w/ brass plate + weight which should be 320+35+10+25 = 390 plus I ordered all 4 extra nameplates with brass with custom text on all, including the first one so that should be +7 (for first plate, brass and custom font) and then +12 for each extra (brass, custom font) which is an extra 55. And then shipping to US said 48 so the total should not be 390 + 55 + 48 = 493 but I received an invoice for 473. Where is the $20 cut off from? I know this doesn't matter since I want to change my order but I would like to make sure this is all correct.
Hey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
yep i will let you knowHey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
I have PM'ed you, I will pay the invoice immediately after change. Let me know, thanks excluisve.
yep i will let you knowHey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
I have PM'ed you, I will pay the invoice immediately after change. Let me know, thanks excluisve.
extra nameplate may a little wrong .i am doing it
Paid thank you very much!You are welcome !
i have write down you new addressHey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
I have PM'ed you, I will pay the invoice immediately after change. Let me know, thanks excluisve.
I did some really weird fonts and gave google drive links to download the fonts. Is it possible to do these fonts @excluisve ?i am ready plz re enter !
I actually didn't notice red middle as an option and I will also be changing my order to a black-red-black now.
I will resubmit if the fonts aren't possible, unless you're able to edit it for me. I'll be declining the invoice that was already sent to me since I will be changing the order. Sorry for this inconvenience :( Also, what email should I be receiving the invoice from? This can be pm'd to me since this is personal info but I want to make sure I received a legit invoice.
And can someone help me figure out pricing?
Originally, I did Dark Green - Brass - Dark Green w/ brass plate + weight which should be 320+35+10+25 = 390 plus I ordered all 4 extra nameplates with brass with custom text on all, including the first one so that should be +7 (for first plate, brass and custom font) and then +12 for each extra (brass, custom font) which is an extra 55. And then shipping to US said 48 so the total should not be 390 + 55 + 48 = 493 but I received an invoice for 473. Where is the $20 cut off from? I know this doesn't matter since I want to change my order but I would like to make sure this is all correct.
Any updates to the payment status?still updating
still updating
it will comes later .
Fe still waiit to sentstill updating
it will comes later .
Have all invoices made their way out to everyone, or are the invoices still going out?
Check the new link I have been write down in pp remarks
Sry for thatCheck the new link I have been write down in pp remarks
I have no link in my paypal remarks. What was this link? Also I'm not in the order check form yet
i have write down you new addressHey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
I have PM'ed you, I will pay the invoice immediately after change. Let me know, thanks excluisve.
also pm you to confirm you phone plz check
i have write down you new addressHey excluisve, I just recently changed my address (to another continent), do I need to tell you my new address now? Or should I pay the invoice first?Plz pm me you address
I will change it
Also before shipping it still will need to check address etc
I have PM'ed you, I will pay the invoice immediately after change. Let me know, thanks excluisve.
also pm you to confirm you phone plz check
Replied, thanks for pointing that out! :)
EDIT: Paid invoice too, can't wait to get it! :)
I got two with black top and bottom and the rest in brass. So excited for this!Nice !!
Ah ok. Mine is whatever you see on in the spreadsheet, which is not founders edition. All of my order in the spreadsheet is correct, and I sent my paypal info in pm. I will keep a lookout for your invoice.Fe still waiit to sentstill updating
it will comes later .
Have all invoices made their way out to everyone, or are the invoices still going out?
I have sent you invoice few days againAh ok. Mine is whatever you see on in the spreadsheet, which is not founders edition. All the order in the spreadsheet is correct, and I sent my paypal info in pm. I will keep a lookout for your invoice.Fe still waiit to sentstill updating
it will comes later .
Have all invoices made their way out to everyone, or are the invoices still going out?
Am still waiting for invoice, are they coming out in batches?wait. I have chenck it and ready to sent
If anyone not get invoice plz let me know except all brass version
Or who wants change orders and invoice
Pm me !! Thanks !!
Not get you pm i have checked .also sent the invoice to youIf anyone not get invoice plz let me know except all brass version
Or who wants change orders and invoice
Pm me !! Thanks !!
Sent a PM
Not get you pm i have checked .also sent the invoice to youIf anyone not get invoice plz let me know except all brass version
Or who wants change orders and invoice
Pm me !! Thanks !!
Sent a PM
Paid my invoice! Thanks Exclusive :)
Paid! So excited! :DWow 😮
Thank you ! :DAh,is mini usb :D
I forgot to ask, is the PCB USB C? Will be me the kick up the ass I need to finalise my USB C cables
Can you do these special characters in the name tag?: ♥ ♦ ♠ ♣ ∞
Can you do these special characters in the name tag?: ♥ ♦ ♠ ♣ ∞
yep all characters once you can write on text
It could be
Holding your wallet.Can you do these special characters in the name tag?: ♥ ♦ ♠ ♣ ∞
yep all characters once you can write on text
It could be
Cool. Waiting for an invoice. Take my money please xD
is there a pic of what it looks like with 1 solid color?
is there a pic of what it looks like with 1 solid color?Wait my picture
Paid!thanks
is there a pic of what it looks like with 1 solid color?(https://i.imgur.com/wkBIPR3.png)
is there a pic of what it looks like with 1 solid color?Show Image(https://i.imgur.com/wkBIPR3.png)Show Image(https://i.imgur.com/9zzCxkV.png)
Hope it help !
Flushis there a pic of what it looks like with 1 solid color?Show Image(https://i.imgur.com/wkBIPR3.png)Show Image(https://i.imgur.com/9zzCxkV.png)
Hope it help !
thank you, is the middle piece supposed to be flush or stick out a little?
wait why is there no dark blue name plate?
Last day for last gb to get last E6-V2!!
If anyone wants cancel order plz tell me
i will delete you order from spreadsheet,on the other hand you will not allowed back.
payment deadline is 25th March(All brass version invoice will sent tomorrow )
we get move ready~
So do iLast day for last gb to get last E6-V2!!
If anyone wants cancel order plz tell me
i will delete you order from spreadsheet,on the other hand you will not allowed back.
payment deadline is 25th March(All brass version invoice will sent tomorrow )
we get move ready~
I hate to do this, but I'm going to have to back out on the brass one. I was hoping I could swing it, but there are so many things I want that I gotta pay for soon and I just can't manage them all. It's really hard to justify missing 2 other GB when I already have 2 E6's.
So if anyone was really wanting a brass one, get on it :P
I hate to do this, but I'm going to have to back out on the brass one. I was hoping I could swing it, but there are so many things I want that I gotta pay for soon and I just can't manage them all. It's really hard to justify missing 2 other GB when I already have 2 E6's.
So if anyone was really wanting a brass one, get on it :P
I hate to do this, but I'm going to have to back out on the brass one. I was hoping I could swing it, but there are so many things I want that I gotta pay for soon and I just can't manage them all. It's really hard to justify missing 2 other GB when I already have 2 E6's.
So if anyone was really wanting a brass one, get on it :P
You already have 2 E6s? Wow... :thumb:
Last day for last gb to get last E6-V2!!
If anyone wants cancel order plz tell me
i will delete you order from spreadsheet,on the other hand you will not allowed back.
payment deadline is 25th March(All brass version invoice will sent tomorrow )
we get move ready~
I hate to do this, but I'm going to have to back out on the brass one. I was hoping I could swing it, but there are so many things I want that I gotta pay for soon and I just can't manage them all. It's really hard to justify missing 2 other GB when I already have 2 E6's.
So if anyone was really wanting a brass one, get on it :P
I too would like to announce that I am backing out of all brass e6-v2. I was formerly #17Yea you order was delete early.
I'll be paying in a week or two. Gotta sell some stuffIs okay my friend, ;D
Sent from my LG-H871 using Tapatalk
Manufacturing haven't even started and I'm already hyped :pSame !
All squared up. Really looking forward to this board ;D:thumb:
Hey exclusive, I pmed you about my order, was just wondering if you got it.Sry ,there was no message
Sry ,there was no message
It may something wrong plz pm me again
Next mission: find an end-game switch to chuck on this thing.
Next mission: find an end-game switch to chuck on this thing.
This is the reason I got two plate and PCB :))
My order isn't in the check order sheet and I didn't receive an invoice. I submitted last night shortly after you posted 2 hours left.Yea it will have later
If anyone not get invoice
Plz let mme know !!
Before 12th who not get invoice
Fe not yetIf anyone not get invoice
Plz let mme know !!
Before 12th who not get invoice
including founders? or have you not done those yet
I'm thinking about going linear for this build. Anyone have thoughts on the following?This is my current favorite switch. Fwiw aliaz housings work just as nice IMO with MX silents stems making the switch a bit cheaper (although you could sell the zeal stems too).
- MX Silent black stems in zeal housing
Cherry housings sound much better than zeal housings when not using silent stems.We might be in the minority but I also like cherry housings for their sound. Especially with Zeal stems.
Cherry housings sound much better than zeal housings when not using silent stems.
I'm thinking about going linear for this build. Anyone have thoughts on the following?This is my current favorite switch. Fwiw aliaz housings work just as nice IMO with MX silents stems making the switch a bit cheaper (although you could sell the zeal stems too).
- MX Silent black stems in zeal housing
I ordered a qmk pcb and wanted to ask if there is a .json file available to use with kbfirmware.com editor or we have to build it ourselves?It will a Json files
If anyone wants out lemme know I missed the deadline :-[
I just get pvd silver sample and pcb
I will sent all brass version now. plz let me know you change
thanksShow Image(https://i.imgur.com/Hnm2Gfv.jpg)
More pic here :https://imgur.com/a/yQkRt (https://imgur.com/a/yQkRt)
So the whole case would be silver pvd ? Shiny AF ! ;D
Lol... Now I really need to wear glove when using it.So the whole case would be silver pvd ? Shiny AF ! ;D
of coz !
Lol... Now I really need to wear glove when using it.So the whole case would be silver pvd ? Shiny AF ! ;D
of coz !
all brass version still not sent invoice
plz pm me you choice silver pvd or sandiblasted each part
thx
all brass version still not sent invoice
plz pm me you choice silver pvd or sandiblasted each part
thx
Here : Left to rightShow Image(https://i.imgur.com/VyNyCjO.jpg)
1-raw brass easy to be oxidation
2-brass pvd silver
3-brass sandblasted
4-alu
5-MAO
All brass only have raw - sandblasted - Pvd SilverHere : Left to rightShow Image(https://i.imgur.com/VyNyCjO.jpg)
1-raw brass easy to be oxidation
2-brass pvd silver
3-brass sandblasted
4-alu
5-MAO
Thanks :thumb:
So.. many.. choices... ⁀⊙﹏☉⁀
The default brass middle case is pvd or sandblasted?
The default brass middle case is pvd or sandblasted?
/Sandblasted
Can the sandblasted finish still oxidize, or no?
Okay, so then I should probably only get raw if i want it to oxidize, got it. and you need us to PM the options for our pieces?Can the sandblasted finish still oxidize, or no?
Pvd will not
But sandblasted may not too I have check my r1 middle is still keep well
Yep pm me I will change itOkay, so then I should probably only get raw if i want it to oxidize, got it. and you need us to PM the options for our pieces?Can the sandblasted finish still oxidize, or no?
Pvd will not
But sandblasted may not too I have check my r1 middle is still keep well
Pumped for my first GB! Thanks so much for being extremely helpful Exclusive!
Going to be going with R10 67g Zealios for sure.
Cherry housings sound much better than zeal housings when not using silent stems.I'm thinking about going linear for this build. Anyone have thoughts on the following?This is my current favorite switch. Fwiw aliaz housings work just as nice IMO with MX silents stems making the switch a bit cheaper (although you could sell the zeal stems too).
- MX Silent black stems in zeal housing
Pumped for my first GB! Thanks so much for being extremely helpful Exclusive!
Going to be going with R10 67g Zealios for sure.
Make some holy pandas ;)
That silver PVD brass is insane Excluisve :p :thumb:
I’m glad he didn’t post until now. Woulda been harder to drop out and I really don’t need 3 e6 and I can’t bring myself to sell the ones I have now. They feel too nice to type on.
I have not gotten a invoice yet.I will sent later
PM'd you about changing top/bottom color. I may have sent it twice since it wasnt showing in my outbox the first time, so my apologies!Never mind!:)
Nobody above me better cancel their order! I'm sitting in row 69 right now :p
Yes, I'm still a child at heart.
Lol it doesn’t matter. Just having a bit of fun ;DNobody above me better cancel their order! I'm sitting in row 69 right now :p
Yes, I'm still a child at heart.
Why does it matter? Boards aren't numbered.
Lol it doesn’t matter. Just having a bit of fun ;DNobody above me better cancel their order! I'm sitting in row 69 right now :p
Yes, I'm still a child at heart.
Why does it matter? Boards aren't numbered.
Yeah, it was short lived :’( but there’s still a chance in the future!Lol it doesn’t matter. Just having a bit of fun ;DNobody above me better cancel their order! I'm sitting in row 69 right now :p
Yes, I'm still a child at heart.
Why does it matter? Boards aren't numbered.
Now you're in row 70 :(
I just get BRASS pvd silver sample and pcb
I will sent all brass version now. plz let me know you change
thanksShow Image(https://i.imgur.com/v9SxIzD.jpg)
More pic here :https://imgur.com/a/yQkRt (https://imgur.com/a/yQkRt)
Yeah, it was short lived :’( but there’s still a chance in the future!
All these brass mid is making me slightly regret not getting brass mid D:I almost didnt get it because of the price jump but I figured if I'm already spending over $400 why not make get it all
I have not gotten a invoice yet.I have sent invoice two days ago plz check
All these brass mid is making me slightly regret not getting brass mid D:
All these brass mid is making me slightly regret not getting brass mid D:
My original order was dark green brass dark green with brass plate, weight and name plates.
I would have kept that if I didn't see that black red black was an option. The rest of the things I kept brass.
All these brass mid is making me slightly regret not getting brass mid D:
My original order was dark green brass dark green with brass plate, weight and name plates.
I would have kept that if I didn't see that black red black was an option. The rest of the things I kept brass.
That was my original as well, darkgreen-brass-darkgreen, together with GMK Royal Alpha. But I would have to buy the Royal Alpha and I already have GMK Led Zep coming so I picked the black-red-black as close next. Hopefully I won't regret my choice :confused:
Exclusive, are we able to do PVD silver for brass for the non founder units?
Exclusive, are we able to do PVD silver for brass for the non founder units?
I asked and he said that PVD brass is only for founders.
Good lord that red and brass combo is stunning!Agreed I wish red made it to case colors
Good lord that red and brass combo is stunning!Agreed I wish red made it to case colors
Sent from my Nexus 6P using Tapatalk
Agreed I wish red made it to case colorsExclusive put red back in for case colors. I got a red mid piece.
Agreed I wish red made it to case colorsExclusive put red back in for case colors. I got a red mid piece.
Just want to make sure everything is good from me. Checked the spreadsheet and noticed you hadn't put my order as paid. Anyway, hope all is well! :cool:plz wait i am doing it
Yesterday i have sent email to some people asking cancel order or notLet's go thx exclusive.
unfortunately many people drop out due to those reason ....
-i need fix my laptop - my dog sick need pay bills - my life suffered -housing fire - phone missing need buy new
IMO--
guys plz don play joke on me .be a adult just tell me the truth is fine
thanks !
btw ,i have ask anyone want cancel pm me .however i have ask this many days no one do it until when i sent email ask
In case those things happened again i will selection some people to my banned list .
thanks everyone again .we will start move next few days
Let's not make light of certain situations actually happening to people. While it's very likely people are just making excuses (and excluisve just wants them to be honest and upfront about it), these things can happen at any given time.
A member on Massdrop had purchased into GMK Laser and then his dog fell insanely ill probably only a week after close. He, of course, wanted the set real bad but, for him, his dog > keyboard/keysets, so he tried to sell his spot since a cancellation wasn't possible. Luckily was able to work everything out and keep his spot but bad situations happen.
Getting an E6-V2 is special to me, especially in the black/red/black color. While I'd like to inflict some top notch remorse in those that couldn't get one, by posting numerous fancy photos of my E6, I'd hate for karma to come back and bite me in the ass later. Or if we somehow got ivan'd or m65-a'd.
Getting an E6-V2 is special to me, especially in the black/red/black color. While I'd like to inflict some top notch remorse in those that couldn't get one, by posting numerous fancy photos of my E6, I'd hate for karma to come back and bite me in the ass later. Or if we somehow got ivan'd or m65-a'd.
First regarding the underlined section, this seems extremely unlikely to me. Exclusive has some of the best service I've dealt with. He's always quick with the responses and very understanding.
Either way, I think you will be very happy with your purchases. I love my e6s. Part of me is still regretting dropping out of the founders edition, but I just couldn't justify the spend when I have 2 E6 now :P. If I didn't already have one, buying a new one woulda been an easy choice. 100% one of the nicest MX HHKBs out there.
Getting an E6-V2 is special to me, especially in the black/red/black color. While I'd like to inflict some top notch remorse in those that couldn't get one, by posting numerous fancy photos of my E6, I'd hate for karma to come back and bite me in the ass later. Or if we somehow got ivan'd or m65-a'd.
Getting an E6-V2 is special to me, especially in the black/red/black color. While I'd like to inflict some top notch remorse in those that couldn't get one, by posting numerous fancy photos of my E6, I'd hate for karma to come back and bite me in the ass later. Or if we somehow got ivan'd or m65-a'd.
Don't you go and curse this.
Getting an E6-V2 is special to me, especially in the black/red/black color. While I'd like to inflict some top notch remorse in those that couldn't get one, by posting numerous fancy photos of my E6, I'd hate for karma to come back and bite me in the ass later. Or if we somehow got ivan'd or m65-a'd.
Don't you go and curse this.
Exactly why I choose not to taunt anyone that couldn't get in on this. You can trust certain community members like excluisve or the gmk 9009 r2 runners, but sometimes **** happens. Any gb needs all the good karma it can get. So I'd rather not **** on anyone who legit couldn't participate. (Unless they were actually trolling lol.)
I fixed it. I don't actually expect excluisve to Ivan anyone. I used that example specifically because it is unlikely (read: next to impossible) to happen. Bad example. I was trying to be hyperbolic, but that is clearly too touchy a subject in the context of group buys.
A loss of tens of thousands of dollars, many angry people, and no answers.I fixed it. I don't actually expect excluisve to Ivan anyone. I used that example specifically because it is unlikely (read: next to impossible) to happen. Bad example. I was trying to be hyperbolic, but that is clearly too touchy a subject in the context of group buys.
What happened with Ivan? Wasn't around these parts til some months ago.
Didn’t mean to sully the thread, just answer a question. I just want to reiterate that I in no way meant to disrespect Exclusive since he’s done nothing to suggest that he’d run away with the money. Otherwise I wouldn’t be in this GB.I fixed it. I don't actually expect excluisve to Ivan anyone. I used that example specifically because it is unlikely (read: next to impossible) to happen. Bad example. I was trying to be hyperbolic, but that is clearly too touchy a subject in the context of group buys.
What happened with Ivan? Wasn't around these parts til some months ago.
No offense fatpolomanjr, but you saying Exclusive is trustworthy means absolutely nothing. Before the incident, Ivan had a much better reputation than Exclusive with many more GBs under his belt. This isn’t a dig at Exclusive either, just a warning to never put money into a GB that you aren’t prepared to lose.
Regardless of how everyone feels about Ivan, the events that transpired, and the minuscule but nonzero chance of exclusive running off with the money. I think it's exceptionally disrespectful to constantly bring up Ivan in a GB thread when the runner has been nothing but courteous, responsive, and hardworking.
Please take your drama somewhere else, I'm just excited for my keyboards.
What you guys talking cautiously is insignificance
I want focus on Gb instead of those ridiculously things
Time will tell the truth
Thanks !
Also you guys can ask people who join r1 before
Also you guys can ask people who join r1 before
Can confirm R1 was great, board came fast and turned out awesome.
Hey guys, just wanted to share some info and feedback since I have a round 1 E6V2, and have experienced a few GB's personally or through friends, some good (Mechmini1/SA sets, Alf, Tric, 9009, Pristine) and some ****ed GB's (M65-A, Exent, Mech27 R1), and because I see some people questioning the future of the buy!Is that black Mao black?
The quality and design of the board are excellent. A product of multiple GB's under his belt.
The fact that Exclusive is so flexible on colors/design/payments, and willing to work with everyone are clear signs of a person who cares more about your product than his product.
Another huge one is being active on multiple platforms and his own thread. As in, not disappearing from anxiety when things go wrong, responding quickly, etc. In the end, its not always about the money. A simple "sorry I ****ed up the buy" will go a longer way than disappearing.
So please don't be worried friends. Exclusive will make it right! Heres my E6, cheers!Show Image(https://i.imgur.com/Z8iV96F.jpg)
Aye, the mythical Oreo Keeb.Hey guys, just wanted to share some info and feedback since I have a round 1 E6V2, and have experienced a few GB's personally or through friends, some good (Mechmini1/SA sets, Alf, Tric, 9009, Pristine) and some ****ed GB's (M65-A, Exent, Mech27 R1), and because I see some people questioning the future of the buy!Is that black Mao black?
The quality and design of the board are excellent. A product of multiple GB's under his belt.
The fact that Exclusive is so flexible on colors/design/payments, and willing to work with everyone are clear signs of a person who cares more about your product than his product.
Another huge one is being active on multiple platforms and his own thread. As in, not disappearing from anxiety when things go wrong, responding quickly, etc. In the end, its not always about the money. A simple "sorry I ****ed up the buy" will go a longer way than disappearing.
So please don't be worried friends. Exclusive will make it right! Heres my E6, cheers!Show Image(https://i.imgur.com/Z8iV96F.jpg)
Sent from my Nexus 6P using Tapatalk
I'm also a R1 E6-V2 owner. Exclusive has been one of the best GB runners I've had the experience being a part of, I have no doubts in his ability to deliver a product you will love :)
(Attachment Link)
I don't think bro gamer sets are meant to be used like this, but I plan to do so on my E6:Show Image(https://i.imgur.com/e3kAakB.jpg)
I don't think bro gamer sets are meant to be used like this, but I plan to do so on my E6:Show Image(https://i.imgur.com/e3kAakB.jpg)
Is the USB port in the middle or on the left?
I want to start to work on my QMK layout for the E6-V6 R2. Which keyboard/pcb in the official github repo can I use as a starting point?E6 is in the official repo as 'e6v2'.
I want to start to work on my QMK layout for the E6-V6 R2. Which keyboard/pcb in the official github repo can I use as a starting point?E6 is in the official repo as 'e6v2'.
when is e6 v3
when is e6 v3
I have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
I have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
I have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
When do you need these at the latest?
Sry can’t changeI have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
When do you need these at the latest?
Also, is there still time to change the name tag engraving?
I assume that was mistyped as that is in over a week.Sry can’t changeI have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
When do you need these at the latest?
Also, is there still time to change the name tag engraving?
Deadline was 5th April
I assume that was mistyped as that is in over a week.Sry can’t changeI have sent all orders to factory last week
Factory will confirm and talk to me about manufacture
Btw,FE orders plz give me you customized count weight design files
Need Ai or psd files . You can give me the Dropbox links or whatever I can download
Thanks !
When do you need these at the latest?
Also, is there still time to change the name tag engraving?
Deadline was 5th April
Sent from my ONEPLUS A5010 using Tapatalk
Oi, not sure if the R2 pcbs have any changes, but https://www.reddit.com/u/merlin36 was able to update the configuration to support the existing QMK pcbs and my QMK repo:Very cool of you!
http://config.qmk.fm/#/e6v2/KEYMAP_HHKB
Anything can be done with the standard KEYMAP (it has all the different split keys), but if you are using one of the specific layouts you can use that instead and not have to fill your layout with KC_NO for stuff that you don't use.
If the R2 QMK pcb happens to be different, let me know and I can work on adding support for that one too.
Oi, not sure if the R2 pcbs have any changes, but https://www.reddit.com/u/merlin36 was able to update the configuration to support the existing QMK pcbs and my QMK repo:As someone who has never used QMK, which route would be easier?
http://config.qmk.fm/#/e6v2/KEYMAP_HHKB
Anything can be done with the standard KEYMAP (it has all the different split keys), but if you are using one of the specific layouts you can use that instead and not have to fill your layout with KC_NO for stuff that you don't use.
If the R2 QMK pcb happens to be different, let me know and I can work on adding support for that one too.
Here is the size and sample pic
designed by afrokobe.Show Image(https://i.imgur.com/4PQY93K.png)
ai.psd cdr .
You can put whatever you want on the weight!Here is the size and sample pic
designed by afrokobe.Show Image(https://i.imgur.com/4PQY93K.png)
ai.psd cdr .
Do we have the entire space of the weight to work with, or does the E6_V2 founders edition part need to be on there as well?
Hey exclusive I sent you a PM on here and reddit regarding my order. Haven't said it enough but the E6-V2 looks great :)checked in reddit
i have receive somone`s files for FE brass weightThanks for the extension, exclusive!
but ai /psd all failed so i may need dwg or dxf
thanks !
deadline delay to 10th btw FE orders plz sent files to me
after deadline i will leave it blank
i have receive somone`s files for FE brass weightThanks for the extension, exclusive!
but ai /psd all failed so i may need dwg or dxf
thanks !
deadline delay to 10th btw FE orders plz sent files to me
after deadline i will leave it blank
In an earlier post you mentioned soimething about 160 mm width (https://geekhack.org/index.php?topic=94248.msg2571034#msg2571034), whereas here it says 210 mm. Not sure which one to pick now (210 looks more correct).
Also, from the sample picture above, what do the pink outlines around the holes mean?
Oh yeah, and do you want it sized for the entire weight, or just the area between the screws will be fine?Just the area between the screws
Okay, thanksOh yeah, and do you want it sized for the entire weight, or just the area between the screws will be fine?Just the area between the screws
Last day for files of fe brass weight design.Were you able to open mine?
i am working on tt will show when finish :)Last day for files of fe brass weight design.Were you able to open mine?
Any updates on production?
Any updates on production?
Any updates on production?
What, you haven't received your E6-V2 yet? We all received ours like from last week.
Would also like to know if you received my design and if it works out.it works
Sweet! :)Would also like to know if you received my design and if it works out.it works
hey guys i am just get some top case from factory and have a test with pcb
everything is fine .
some pics below idk why i cant use imgur
hey guys i am just get some top case from factory and have a test with pcb
everything is fine .
some pics below idk why i cant use imgur
hey guys i am just get some top case from factory and have a test with pcb
everything is fine .
some pics below idk why i cant use imgur
There are a lot of hhkb layout boards recently, but for me it'll be my first. I knew I had to get one. Choosing this or m60-a was harder, but with the red middle a no brainer.
The blocked version looking :thumb: too.
There are a lot of hhkb layout boards recently, but for me it'll be my first. I knew I had to get one. Choosing this or m60-a was harder, but with the red middle a no brainer.
The blocked version looking :thumb: too.
Another superior black-red-black ;) Any ideas for your keyset? I'm not interested in Forge/Demonic/Led Zeppelin but this one did interest me: https://geekhack.org/index.php?topic=95145.0
Not too into the white alphas, I'd like it to be more black/red but if the brightness of the alphas are toned down, I'll likely be picking it up. Also if the icon mods are changed. I love icon mods but those aren't that great.
There are a lot of hhkb layout boards recently, but for me it'll be my first. I knew I had to get one. Choosing this or m60-a was harder, but with the red middle a no brainer.
The blocked version looking :thumb: too.
Another superior black-red-black ;) Any ideas for your keyset? I'm not interested in Forge/Demonic/Led Zeppelin but this one did interest me: https://geekhack.org/index.php?topic=95145.0
Not too into the white alphas, I'd like it to be more black/red but if the brightness of the alphas are toned down, I'll likely be picking it up. Also if the icon mods are changed. I love icon mods but those aren't that great.
Whhhhhhyyy
My eyes. What horrible icon mods
Another superior black-red-black ;) Any ideas for your keyset? I'm not interested in Forge/Demonic/Led Zeppelin but this one did interest me: https://geekhack.org/index.php?topic=95145.0
Not too into the white alphas, I'd like it to be more black/red but if the brightness of the alphas are toned down, I'll likely be picking it up. Also if the icon mods are changed. I love icon mods but those aren't that great.
Another superior black-red-black ;) Any ideas for your keyset? I'm not interested in Forge/Demonic/Led Zeppelin but this one did interest me: https://geekhack.org/index.php?topic=95145.0
Not too into the white alphas, I'd like it to be more black/red but if the brightness of the alphas are toned down, I'll likely be picking it up. Also if the icon mods are changed. I love icon mods but those aren't that great.
That set looks pretty good, and would be a good match for murderface colorways like Led Zep. The white on the mods and the white alphas kills it for my E6 though, since I want strictly red and black colors. I might even just use black cherry pbt blanks. Possibly mixed up with some JTK Red Riot.
(Attachment Link)
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
(Attachment Link)
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
(Attachment Link)
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
WHY DID I NOT GO FOR THE FOUNDER EDITION???
(Attachment Link)
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
WHY DID I NOT GO FOR THE FOUNDER EDITION???
food, shelter, clothing.
(Attachment Link)Ohh nice. Regret not going on the FE :/
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
(Attachment Link)That looks amazing. FE here as well, can't wait to see what the render of mine looks like :D
Exclusive just sent me the rendering of my FE weight design.
Now the only thing left in my mind is: wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww :eek: :eek: :eek: :eek: :eek:
Is there still a chance to order an extra nameplate? Forgot to add a color...
i have been work few days make the weight designLooks like they're coming out pretty good! Really like the simple design Phoenix has.
here is the pic :Show Image(https://i.imgur.com/htMnLPW.png)
i have been work few days make the weight design
here is the pic :Show Image(https://i.imgur.com/htMnLPW.png)
i have been work few days make the weight design
here is the pic :Show Image(https://i.imgur.com/htMnLPW.png)
Hey Exclusive! Just wanted to see if we're still on track for the end of may shipping? Thanks!Yep!
Edit - Just saw the title change, looks like we're in production!
For those of you looking to make keymaps and flash your e6-v2, QMK now has a GUI that will let you do that without any lines of code!Thank to amnesia do this for e6!
The code hasn't changed, but there is now an easy way to make your keymaps.
https://config.qmk.fm/#/e6v2/LAYOUT_ansi
Great news. That's very exciting. I will need confirmation for my shipping address when this happens, as I expect to possibly move next month or slightly later.Hey Exclusive! Just wanted to see if we're still on track for the end of may shipping? Thanks!Yep!
Edit - Just saw the title change, looks like we're in production!
If all thing in process we will sent board end of this month
On the contrary, it may delay little time
I will sent pic tomorrow!
Excited to see the dark blue!!! :thumb:
Excited to see the dark blue!!! :thumb:
me too
Hi guys
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guys
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guysWhoo! Thanks for all your hard work excluisve ^-^
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guys
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guysAlways nice to see factory progress shots. Looking forward to getting mine!
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guysVery nice bud. Still regretting not getting founders
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Hi guys
here was some pictures i take from factory
plate was done ,bottom and middle is manufacturing
if all things go well it will be done almost on 15th May. :thumb:Show Image(https://i.imgur.com/nbxxlXw.jpg)Show Image(https://i.imgur.com/uByI1WZ.jpg)Show Image(https://i.imgur.com/zYE7eNU.jpg)
Group Buy going so quick, thanks for the update Exclusive!
No it is not compatible. It's close though but you'd have to do some cutting, which I do not recommend.ah, ty!
I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking something
I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking something
I did a comparison between E6 and Viper,
There are two points after the PCB comparison
1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate
2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate
3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the case
I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking something
I did a comparison between E6 and Viper,
There are two points after the PCB comparison
1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate
2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate
3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the case
How are the switch distances different? Doesn't that mean the keycaps won't work as well? I thought that stuff was all standard.
I'm not sure if this has been asked before, but I see the port for this is centered and the OP says RGB bottom. Would that make this PCB compatible with a Viper case? Or am I overlooking something
I did a comparison between E6 and Viper,
There are two points after the PCB comparison
1. The distance between switches in e6 pcb is less than the one in viper --> means the e6 pcb is not compatible with viper plate
2. The width of e6 pcb is larger than viper --> means you need to cut it narrower first if you insist to use one with your own plate
3. the USB port position is exactly same, also the MCU position --> means no change need to be made about the case
How are the switch distances different? Doesn't that mean the keycaps won't work as well? I thought that stuff was all standard.
Key units are 19.05mm as standard, E6 is 19.00mm. Keycaps are 18.1mm wide (1u).
Makes me wonder if the PCB would fit the 356mini? They seem very similar now I'm thinking about it.
V1 and V2 have different tolerances as well iircMakes me wonder if the PCB would fit the 356mini? They seem very similar now I'm thinking about it.
i don't believe it will, i think it needs to be ground down too much since the mini has super tight tolerances
Any update on the anodizing? Can't wait for these to ship! :thumb: :thumb:
PCb was finish
Bootmapper:Show Image(https://i.imgur.com/qdEypJ0.jpg)
Show Image(https://i.imgur.com/YfnPwb2.jpg)
PCb was finishVery nice exclusive
Bootmapper:Show Image(https://i.imgur.com/qdEypJ0.jpg)
Show Image(https://i.imgur.com/YfnPwb2.jpg)
Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?
Even the brass plate?Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?
We are CNC the plate .
All plate was cnc .pc -alu-brassEven the brass plate?Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?
We are CNC the plate .
Good to know! :thumb:All plate was cnc .pc -alu-brassEven the brass plate?Since we’ve got time while we wait, how are the different switch plates cut? Laser, water jet, CNC?
We are CNC the plate .
CNC is ready done still need wait 2 days or more to checkTfw I should grabbed a founders. Excited to see everything dude
CNC is ready done still need wait 2 days or more to checkGetting excited
CNC is ready done still need wait 2 days or more to check
CNC is ready done still need wait 2 days or more to checkLegit drooling. These look amazing!
Tomorrow is the last day of May; any updates?
YeaSo after cnc they go to anodizing or is it good to go after that?
CNC will all done tomorrow , shipping day delay some days
After done I will check each part then go to anodizedYeaSo after cnc they go to anodizing or is it good to go after that?
CNC will all done tomorrow , shipping day delay some days
Sent from my VS996 using Tapatalk
Do you think we will have them before the end of June or later?After done I will check each part then go to anodizedYeaSo after cnc they go to anodizing or is it good to go after that?
CNC will all done tomorrow , shipping day delay some days
Sent from my VS996 using Tapatalk
Yep June.Do you think we will have them before the end of June or later?After done I will check each part then go to anodizedYeaSo after cnc they go to anodizing or is it good to go after that?
CNC will all done tomorrow , shipping day delay some days
Sent from my VS996 using Tapatalk
Sent from my VS996 using Tapatalk
YeaGiven the delays I may have to switch shipping address. Could you please confirm with me before sending?
CNC will all done tomorrow , shipping day delay some days
Given the delays I may have to switch shipping address. Could you please confirm with me before sending?
Sent from my mobile using Tapatalk
plz check you orders againI'd advise only checking in with the people who requested it. With others, assume that it is still the same address.
if anything was wrong plz let me know
like this : #23 - PC plate change to brass plate ,make it clear
thanks !
before ship i will let you guys check the shipping information ,btw those information was Privacy how to show you guys to check it ? one by one ??
Does anyone know how much this weigh?
Estimated ship time?
Sent from my VS996 using Tapatalk
Maybe around the end of this month, according to exclusive in Discord pms:c that would be sad if so. I was hoping to have this in hand before the end of the monthEstimated ship time?
Sent from my VS996 using Tapatalk
Sent from my LG-H871 using Tapatalk
Sry for the delaywow those boxes are awesome :D
I do want ship it fast but I need make sure boards is safe and go well .
Tomorrow I will go to sandblasted for brass middle / weight /plate
Anodization will start at 15th
By the way new box arrival this was for free to package
Thank my friend Gaide design it !Show Image(https://i.imgur.com/lFcPhEO.jpg)Show Image(https://i.imgur.com/RvSc4ZC.jpg)
https://imgur.com/gallery/L3EK4ZD
Sry for the delayAAAAAAAA
I do want ship it fast but I need make sure boards is safe and go well .
Tomorrow I will go to sandblasted for brass middle / weight /plate
Anodization will start at 15th
By the way new box arrival this was for free to package
Thank my friend Gaide design it !Show Image(https://i.imgur.com/lFcPhEO.jpg)Show Image(https://i.imgur.com/RvSc4ZC.jpg)
https://imgur.com/gallery/L3EK4ZD
Sry for the delay
I do want ship it fast but I need make sure boards is safe and go well .
Tomorrow I will go to sandblasted for brass middle / weight /plate
Anodization will start at 15th
By the way new box arrival this was for free to package
Thank my friend Gaide design it !Show Image(https://i.imgur.com/lFcPhEO.jpg)Show Image(https://i.imgur.com/RvSc4ZC.jpg)
https://imgur.com/gallery/L3EK4ZD
Sry for the delay
I do want ship it fast but I need make sure boards is safe and go well .
Tomorrow I will go to sandblasted for brass middle / weight /plate
Anodization will start at 15th
By the way new box arrival this was for free to package
Thank my friend Gaide design it !Show Image(https://i.imgur.com/lFcPhEO.jpg)Show Image(https://i.imgur.com/RvSc4ZC.jpg)
https://imgur.com/gallery/L3EK4ZD
Yup will need to change address, please pm me before shipping :D
Cheers for the GB
Yup will need to change address, please pm me before shipping :D
Cheers for the GB
There are a lot of people in this GB, you should PM him.
Update:
1. i have go to factory anodizing today they told me it will done on 20th ,coz in china today is The Dragon Boat Festival。
2.when anodizing done i will do the qc and start shipping , firstly i will ship 20 orders and show their board .
3 about shipping information i will sent email (paypal address) to orders for check, so pay attention on email .
thanks !
Update:Are the FE versions being manufactured after the normal boards? I mean, they don't need to be anodized.
1. i have go to factory anodizing today they told me it will done on 20th ,coz in china today is The Dragon Boat Festival。
2.when anodizing done i will do the qc and start shipping , firstly i will ship 20 orders and show their board .
3 about shipping information i will sent email (paypal address) to orders for check, so pay attention on email .
thanks !
All FE was done too .but some are need to PVDUpdate:Are the FE versions being manufactured after the normal boards? I mean, they don't need to be anodized.
1. i have go to factory anodizing today they told me it will done on 20th ,coz in china today is The Dragon Boat Festival。
2.when anodizing done i will do the qc and start shipping , firstly i will ship 20 orders and show their board .
3 about shipping information i will sent email (paypal address) to orders for check, so pay attention on email .
thanks !
All FE was done too .but some are need to PVDUpdate:Are the FE versions being manufactured after the normal boards? I mean, they don't need to be anodized.
1. i have go to factory anodizing today they told me it will done on 20th ,coz in china today is The Dragon Boat Festival。
2.when anodizing done i will do the qc and start shipping , firstly i will ship 20 orders and show their board .
3 about shipping information i will sent email (paypal address) to orders for check, so pay attention on email .
thanks !
no wry
So,if im in the first 20 on the non fe, will I be one of the first 20 sent out or is it random based on what the buyer wanted?random
Sent from my VS996 using Tapatalk
I will start ship on 21th
So plz check spreadsheet again ,i don’t want ask this again and again .
Last chance for check ,I will pick the peices from spreadsheet.
Ps
I really want orders can add my discord
Coz gh message system is bad sometimes lose message
On discord , you can contact me easily if have any questions about board
Exclusive#8666
I will start ship on 21th
So plz check spreadsheet again ,i don’t want ask this again and again .
Last chance for check ,I will pick the peices from spreadsheet.
Ps
I really want orders can add my discord
Coz gh message system is bad sometimes lose message
On discord , you can contact me easily if have any questions about board
Exclusive#8666
I will start ship on 21th
So plz check spreadsheet again ,i don’t want ask this again and again .
Last chance for check ,I will pick the peices from spreadsheet.
Ps
I really want orders can add my discord
Coz gh message system is bad sometimes lose message
On discord , you can contact me easily if have any questions about board
Exclusive#8666
Do I wait for your email for my shipping address, or do I PM you?
I will start ship on 21th
So plz check spreadsheet again ,i don’t want ask this again and again .
Last chance for check ,I will pick the peices from spreadsheet.
Ps
I really want orders can add my discord
Coz gh message system is bad sometimes lose message
On discord , you can contact me easily if have any questions about board
Exclusive#8666
Do I wait for your email for my shipping address, or do I PM you?
I will start ship on 21th
So plz check spreadsheet again ,i don’t want ask this again and again .
Last chance for check ,I will pick the peices from spreadsheet.
Ps
I really want orders can add my discord
Coz gh message system is bad sometimes lose message
On discord , you can contact me easily if have any questions about board
Exclusive#8666
21st, that's so great... so with a bit of luck it'll arrive in July :D
21st, that's so great... so with a bit of luck it'll arrive in July :D
Think he said somewhere it's not ordered :D
I am packing now
Tomorrow I will post orders list to ask shipping address
I made group 1, such hype!!!wait where'd you see you made group 1?
Sent from my VS996 using Tapatalk
Five posts above you.I made group 1, such hype!!!wait where'd you see you made group 1?
Sent from my VS996 using Tapatalk
Five posts above you.I made group 1, such hype!!!wait where'd you see you made group 1?
Sent from my VS996 using Tapatalk
Still works for me, but I looked through the list and you were not in group unfortunately.Five posts above you.I made group 1, such hype!!!wait where'd you see you made group 1?
Sent from my VS996 using Tapatalk
I don't see a list or a link :D Thats why i asked
Edit: it seems GH linking Imgur pictures is broken atm. Just right click on the lil' box and open it in a new tab.
ns 90 / fatpolomanjr /cheunjmIs there a reason you are declaring low value for boards going to the USA? Customs fees shouldn't be an issue, I don't think.
i get wrong email address on you guys , pm me .
the rest of list have sent email plz check .someone i have connect on discord and slack .
ps
i will ship by dhl and value as 60$ ,make sure dhl on you place work well also wont lose .
yep value not a question .idk how much it will have tax , as r1 all were 60$ns 90 / fatpolomanjr /cheunjmIs there a reason you are declaring low value for boards going to the USA? Customs fees shouldn't be an issue, I don't think.
i get wrong email address on you guys , pm me .
the rest of list have sent email plz check .someone i have connect on discord and slack .
ps
i will ship by dhl and value as 60$ ,make sure dhl on you place work well also wont lose .
Nice! will we receive a tracking number from our Paypal?
I have not gotten a invoice yet.
Edit: my bad, that must have sounded weird lol. It was just autocorrect.
i really should have got 2 of these fml soooo nice
until now also have 3 orders not reply the email i have sent twice
i will wait tomorrow 12:00am if still not reply it will keep
i need ship the rest of orders tomorrow .
Duckiiunderscore /tanvir175/odd
I have not gotten a invoice yet.Edit: my bad, that must have sounded weird lol. It was just autocorrect.i really should have got 2 of these fml soooo nice
Yo guys, pm exclusive on discord at Exclusive#8666 or here if you want your E6 to ship out in the first round. Apologies if you've already done so. Just trying to get gh to ping you, hence the quotes.until now also have 3 orders not reply the email i have sent twice
i will wait tomorrow 12:00am if still not reply it will keep
i need ship the rest of orders tomorrow .
Duckiiunderscore /tanvir175/odd
Nice! will we receive a tracking number from our Paypal?
your board come later
i will fill the tracking number ,.when i am sent
GH doesn't ping people when you quote them
this isn't reddit
or i've had a setting wrong for the last 5 years
until now also have 3 orders not reply the email i have sent twiceReplied to your email, my apologies. All is correct.
i will wait tomorrow 12:00am if still not reply it will keep
i need ship the rest of orders tomorrow .
Duckiiunderscore /tanvir175/odd
I have not gotten a invoice yet.Edit: my bad, that must have sounded weird lol. It was just autocorrect.i really should have got 2 of these fml soooo nice
Yo guys, pm exclusive on discord at Exclusive#8666 or here if you want your E6 to ship out in the first round. Apologies if you've already done so. Just trying to get gh to ping you, hence the quotes.until now also have 3 orders not reply the email i have sent twice
i will wait tomorrow 12:00am if still not reply it will keep
i need ship the rest of orders tomorrow .
Duckiiunderscore /tanvir175/odd
GH doesn't ping people when you quote them
this isn't reddit
or i've had a setting wrong for the last 5 years
Hype, just got tracking number! :p
Hype, just got tracking number! :p
oh wow. so shipping's started. a piece is already for sale at r/mm.
I'm about 99% sure that's from the first round.Hype, just got tracking number!
oh wow. so shipping's started. a piece is already for sale at r/mm.
Hype, just got tracking number!same here
Is the tracking number coming from Paypal?Yeah, he updates your PayPal invoice.
Hey I have yet to receive an email to confirm my shipping address.You’re not on the list for this batch
Shipping notification!!! Doesn't look like it's been dropped off yet, but still I'm excited!!! :p :p :pAh I didn't realize that thanks for the heads up.
GH doesn't ping people when you quote them
this isn't reddit
or i've had a setting wrong for the last 5 years
It does if you use tapatalk.Show Image(https://i.imgur.com/TFqW4sE.png)
in for a MAO case. any info on when the MAO cases will ship? :DNext week coming soon
in for a MAO case. any info on when the MAO cases will ship? :DNext week coming soon
Nice
Congrats on another amazing GB, Exclusive! <3Thanks my friend!
in for a MAO case. any info on when the MAO cases will ship? :DNext week coming soon
Nice
Did something happen with the teals? They don't really look anything like the original pictures. They look way more green.
Sent from my Pixel 2 XL using Tapatalk
(Attachment Link)Did something happen with the teals? They don't really look anything like the original pictures. They look way more green.
Sent from my Pixel 2 XL using Tapatalk
It’s the lighting i’m pretty sure
100% the lighting. His lighting is much whiter than yours.(Attachment Link)Did something happen with the teals? They don't really look anything like the original pictures. They look way more green.
Sent from my Pixel 2 XL using Tapatalk
It’s the lighting i’m pretty sure
Mine is definitely not that color
So basically, it's only actually teal when you shine light on it.(Attachment Link)Did something happen with the teals? They don't really look anything like the original pictures. They look way more green.
Sent from my Pixel 2 XL using Tapatalk
It’s the lighting i’m pretty sure
Mine is definitely not that color
E6 came in, the condition is pretty good other than one tiny nick towards the inside of the case. I'll post more pics when I build it in a week or so.Show Image(https://uploads.tapatalk-cdn.com/20180702/f4a12751af1db39477262916f4d22bea.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/31871de85099b5485f23b7f836eecc6a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/3394c3f2d18e111641f41bba1f8c8be7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/e346643b597fb8c32d7ef4f8e455adf1.jpg)[img width=640 height=480]https://uploads.tapatalk-cdn.com/20180702/e1a8c8889772f951c10b21c4a920796e.
Sent from my LG-H871 using Tapatalk
E6 came in, the condition is pretty good other than one tiny nick towards the inside of the case. I'll post more pics when I build it in a week or so.Show Image(https://uploads.tapatalk-cdn.com/20180702/f4a12751af1db39477262916f4d22bea.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/31871de85099b5485f23b7f836eecc6a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/3394c3f2d18e111641f41bba1f8c8be7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/e346643b597fb8c32d7ef4f8e455adf1.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180702/e1a8c8889772f951c10b21c4a920796e.jpg)
Sent from my LG-H871 using Tapatalk
Pics of mine!
NSFW PLEASEYea wasnt thinking when I posted them
Heres a couple of mine. Shes a heavy oneOh man I love WKL 60%! That looks awesome.Show Image(https://uploads.tapatalk-cdn.com/20180703/6ecada4c213f0663ea0e129a658a6bb3.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180703/70fded8402c98b3ec3c7ef3be5ee4937.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180703/b9cc4474d7e90825fa454a15b349bfd7.jpg)
Sent from my VS996 using Tapatalk
I notice a little bit of nameplate wobble. Using something different than screw threads to secure it should work, but I don't really mind it.
Here's my E6-V2:Show Image(https://i.imgur.com/zxIgQgI.jpg)
It's oozing with quality. Not a single cosmetic flaw in sight I've noticed.
I have a black and a red plate but haven't committed to either, so I haven't done any soldering yet. Unfortunately holtites are too big for the the pads (ruined my ESC key and had to bridge the trace to fix it), and I both love swapping out plate colors and loathe desoldering. I think I'm going to get another pcb and just solder it to the other color plate.
Secondly, any clue as to what else to use to secure the name plate?
I am fan of e6v2
Really really counting me the black with red middle
Is amazing job !!
Oooooo can't wait for mine to ship.
Are we able to use QMK toolbox with the PCB?
Yeah I'm having trouble flashing mine as well with QMK. What programmer and mcu should we be using? Details on the qmk repo for E6-V2 are sparse. I already have a hex ready to go.
qmk flashing
When will the next batch of E6's be shipped out?Tomorrow i will start pack the group 2 orders
Ok so looking at the tiny text on the controller, the mcu is an Atmega32U4. I tried flashing with atmel flip but now it's stuck in bootloader mode. I'll use the utility linked by exlusive when I get home tonight.
e: QMK Toolbox isn't picking up on the driver. When I ran zadig to install libusb32 drivers the e6v2 wasn't named atmega32u4 or anything, just the following:Show Image(https://i.imgur.com/h8NLZPZ.png)Show Image(https://i.imgur.com/mzP7TLX.png)
The default listing for the E6-V2 drivers is under Universal Serial Bus Devices as 0xC6-V2. I think the only thing I need is to install the correct driver. Then flashing will be easy.qmk flashing
@amnesia: any tips on flashing the E6-V2 from Round 2? I used your hhkb split layout for mine and flashed with atmel flip but it is now forever in bootloader mode without a proper driver for me to re-flash. Atmel flip simply won't connect to my usb device after pressing the reset button, and qmk toolbox won't recognize any dfu device.
About FE edition please pay attention on this messageIs it possible to change the weight and badge coatings, or is that already done?
i have make a plate as pvd silver also have a Raw brass middle
here is the pictures :Show Image(https://i.imgur.com/GwMIsMn.jpg)Show Image(https://i.imgur.com/rBRo6mM.jpg)
so make sure you selection on all brass version
FE check https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293
(https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293)
If no change i will follow spreadsheet and go on
About FE edition please pay attention on this message
i have make a plate as pvd silver also have a Raw brass middle
here is the pictures :Show Image(https://i.imgur.com/GwMIsMn.jpg)Show Image(https://i.imgur.com/rBRo6mM.jpg)
so make sure you selection on all brass version
FE check https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293
(https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293)
If no change i will follow spreadsheet and go on
About FE edition please pay attention on this message
i have make a plate as pvd silver also have a Raw brass middle
here is the pictures :Show Image(https://i.imgur.com/GwMIsMn.jpg)Show Image(https://i.imgur.com/rBRo6mM.jpg)
so make sure you selection on all brass version
FE check https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293
(https://docs.google.com/spreadsheets/d/1PaLjIqOobKFGM94f90DL3i8dVw4IxvvJLESNjCjiYwk/edit#gid=1820191293)
If no change i will follow spreadsheet and go on
oh, the raw polished brass looks divine! I'm good with full raw! :)
I got QMK Configurator support up. At the moment it only supports the most generic layout that has all the switch positions. More will be added soon. For those who would like to assist, please create your keymap, flash it, confirm it works, and send me the keymap.json that you can export. This way I can figure out the layouts while waiting for my test PCB.
https://config.qmk.fm/#/e6v2/le/LAYOUT
You have to use QMK Toolbox and install the correct drivers. https://github.com/qmk/qmk_driver_installer/releases
If you've already added some combination of drivers, they will interfere with the QMK recommended ones.
You'll be able to tell if you put it into reset mode as QMK Toolbox will report it disconnected and then reconnects it.
Was able to manually create a hex file in the QMK web configurator and flash it quite easily, thanks Merlin!
I dont think qmk pcb have any issue
i have do it by myself also learned how to flash it and share my operation .
read the docs i already post ,i use this method and work well
when u get board test the key and Led ,check it work or not
if u dont know how to flash the pcb read the docs .
Quick question is this one or both of my boards?both i just list a name
Sent from my ONEPLUS A5010 using Tapatalk
looks like founders edition is last? ;)
Here are some pics of mine, I'm very happy with the quality ! QMK worked fine for me as well.awesome! :thumb:Show Image(https://i.imgur.com/GUuhn5Z.jpg)Show Image(https://i.imgur.com/HwAbVSj.jpg)
Which discord server should I be sending message?my ID on discord Exclusive#8666
Which discord server should I be sending message?You will have to add him as a friend, then message.
Which discord server should I be sending message?You will have to add him as a friend, then message.
Hey there, i sent you an email exclusive.what is you ID on the list .above ship list
Sorry about that. Thanks!
Managed to finish mine off 👀
looks like founders edition is last? ;)
This month china start environmental inspection so it delays .
Managed to finish mine off 👀
That's pretty amazing. Great combo. Missing transparent stabilizers with gold wires though for total matching.
Mao with red
Mao with red
Awesome! I'm still trying to figure out the layouts so its not all just "THESE ARE ALL THE PLACES YOU CAN PUT A KEYSWITCH IN". I'd appreciate if you could forward me your exported keymap json file so I can better craft the LAYOUTs.
GH ID: Priapus -joecoolbob -s3vv4 -gizmoplex ok2094
will ship next group no reply until now
Has somebody already made a hhkb layout matrix for the QMK LE firmware version?
Has somebody already made a hhkb layout matrix for the QMK LE firmware version?
That's what I'm waiting for!
Has somebody already made a hhkb layout matrix for the QMK LE firmware version?
That's what I'm waiting for!
Ok, I will work on it when my board arrives. How about to rename the firmware versions oe, le to rev1, rev2?
Show Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
I not yet I will fill it tomorrowShow Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
Hello I have check the mailbox there was no message from youShow Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
Show Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
As long as you provided a valid phone number to Exclusive you should get a text from DHL once it has been picked up and scanned into their system. I'm still waiting for mine too :p
Hello I have check the mailbox there was no message from youShow Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
That why I am ask ppl add my discord as friends list
Geek hack messager sometimes broke down
Hello I have check the mailbox there was no message from youShow Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
That why I am ask ppl add my discord as friends list
Geek hack messager sometimes broke down
I emailed you with the email you provided and didn't see my name listed as one of the people you didn't get a response from! My phone number and my geekhack id was included! I don't have discord so I went with the email option! Do I need to send you a message here too?
Well, I got mine today. Looks great. What size allen wrench do the screws take though? I got two and both are too small to turn the ones in the bottom.Ah the small wrench is for nameplate
Well, I got mine today. Looks great. What size allen wrench do the screws take though? I got two and both are too small to turn the ones in the bottom.Ah the small wrench is for nameplate
case screws i s m2.5 i think is common screws is easy to buy a wrench .
Just got my set. Packaging was great. It is a shame though that you can still see marks from where the components were held during anodization. Maybe that is just my set of components but its pretty obvious. The matte black PCB is a really lovely touch. Polycarb plate is also really well done.
My only issue with the kit is that the anodization between my top and bottom housings is really off. It is hard to capture in a photo but my bottom is almost a matte green where the top is a shiny green. It isn't the biggest issue since I will pretty much just see the top of the keyboard but it is still a bit disappointing.
I look forward to putting this keyboard together.
Kinda sad that my ALT key and spacebar collide sometimes if I dont press the Alt key on center. The PCB holes are just SLIGHTLY off. The tolerences are too tight :-X
Kinda sad that my ALT key and spacebar collide sometimes if I dont press the Alt key on center. The PCB holes are just SLIGHTLY off. The tolerences are too tight :-X
The left ALT key? I had the exact same issue. Had to desolder that switch 3x to get it fixed. Initially I thought it was my GMK spacebar being iffy.
Just got my set. Packaging was great. It is a shame though that you can still see marks from where the components were held during anodization. Maybe that is just my set of components but its pretty obvious. The matte black PCB is a really lovely touch. Polycarb plate is also really well done.The anod hooking all parts is like that on the inside .i have try myself to make it hard to find.
My only issue with the kit is that the anodization between my top and bottom housings is really off. It is hard to capture in a photo but my bottom is almost a matte green where the top is a shiny green. It isn't the biggest issue since I will pretty much just see the top of the keyboard but it is still a bit disappointing.
I look forward to putting this keyboard together.
You can find that e6 keycaps gap was less-than other board .Kinda sad that my ALT key and spacebar collide sometimes if I dont press the Alt key on center. The PCB holes are just SLIGHTLY off. The tolerences are too tight :-X
The left ALT key? I had the exact same issue. Had to desolder that switch 3x to get it fixed. Initially I thought it was my GMK spacebar being iffy.
Yea i tried desoldering but it ended up the same. I will probably file the pcb hole sometime, giving up now.
oh **** mine comes today
If someone has a bootloader PCB and would like to trade for a QMK one, let me know. Thanks!
You can find that e6 keycaps gap was less-than other board .Kinda sad that my ALT key and spacebar collide sometimes if I dont press the Alt key on center. The PCB holes are just SLIGHTLY off. The tolerences are too tight :-X
The left ALT key? I had the exact same issue. Had to desolder that switch 3x to get it fixed. Initially I thought it was my GMK spacebar being iffy.
Yea i tried desoldering but it ended up the same. I will probably file the pcb hole sometime, giving up now.
coz standard keycpas gap was 19.08 i have decrease to 18.88 it make looks gorgeous
about hhkb layout you need push 1.5 alt switch and 1 u win (or something ) to left ,move the switch then solder
i have try it many times it work well,you can try.
Hello I have check the mailbox there was no message from youShow Image(https://media.giphy.com/media/UCnSr8PgXakiQ/giphy.gif)
Tracking received!
Where did you receive the tracking? Did you just check the invoice and see it there, or did PayPal notify you that tracking had been added? I'm in group 2 and don't see mine yet (Exclusive may not be done adding all the tracking for our round though)!
That why I am ask ppl add my discord as friends list
Geek hack messager sometimes broke down
gonna be a while before i get to building it, but it's absolutely gorgeous.Show Image(https://i.imgur.com/PrsZodT.jpg)
Just built my E6. My only problem with it is that since I chose the MAO option for all my nameplates, the letters are almost impossible to see even from just sitting at my desk. White was used to fill in the engraved parts for two of them and for the plate that says e6-v2 there is no filling at all so that one is basically invisible even up close. Other than that everything is perfect and I'm glad I joined this group buy :thumb:I have the same thing with my MAO nameplate and it makes me super happy I decided to get a second in a different color. Though the MAO was my first choice before I realized it was “blank”.
Don't know how to use GH so here's the imgur album https://imgur.com/a/UsgynBEShow Image(https://imgur.com/a/UsgynBE)
Thanks Dead sharing his video and beautiful wrist ~Show Image(https://i.imgur.com/Rr9sZzq.jpg)
PS: FE will start ship Monday ,weekend express not work
Keyboard arrived today :eek:You could just build with pandas and pull them out for modding since they have those sockets
Quality is awesome. Looks like the brass plate doesn't support switch opening, so I will need to wait for Halo switches from MD (-> Holy Pandas) to build the board.
Typing test videos make me want to cut off my ears. I'm not sure why I click on such videos, but your work is certainly appreciated. Your build is fantastic.Why? Makes your boards sound bad?
Typing test videos make me want to cut off my ears. I'm not sure why I click on such videos, but your work is certainly appreciated. Your build is fantastic.Why? Makes your boards sound bad?
close ur eyes famalam
Well it arrived today and it's beautiful. You've outdone yourself Exclusive, I can't wait to build and use this. :DShow Image(https://i.imgur.com/nx7V47D.jpg)
Now if only I can find some good caps to suit
Show Image(https://i.imgur.com/deoWDeH.jpg)Show Image(https://i.imgur.com/DYtX9gC.jpg)
Now if only I can find some good caps to suit
Show Image(https://i.imgur.com/deoWDeH.jpg)Show Image(https://i.imgur.com/DYtX9gC.jpg)
WHAAAAA? ISO ARTISAN??? GIB! INSTAGIB!!!
srsly tho, where'd you get that?
Hey exclusive, do you know how to make the Caps Lock LED work in the QMK configurator?
Hey exclusive, do you know how to make the Caps Lock LED work in the QMK configurator?
Hey exclusive, do you know how to make the Caps Lock LED work in the QMK configurator?
It should be fixed now. I put the fix in yesterday morning.
Finally all built up. Thank you exclusive for another great board!Show Image(https://farm1.staticflickr.com/929/42779673114_1516b1f373_h.jpg)Show Image(https://farm1.staticflickr.com/936/28609918307_f128b0e929_h.jpg)
I would like to cast my vote for round 3 of shipping to start ;)
I got an extra MAO middle, boot mapper PCB, and MAO plate that I am not going to use. PM me on reddit at u/paspasero if you want it. I will sell it at cost + pp fees + shipping.
I got an extra MAO middle, boot mapper PCB, and MAO plate that I am not going to use. PM me on reddit at u/paspasero if you want it. I will sell it at cost + pp fees + shipping.PM’d about pcb
Hey Exclusive, when can we expect to get shipping info for the Founder's Editions? Or at least, me, if I somehow missed it.Yes ,I am here it will ship on Monday
I am not sure I fully understand what you want. Do you want us to PM you the info on discord? because it says you have messages blocked from non friends. or would it be better the email them to you?Email to me you ship info
I am not sure I fully understand what you want. Do you want us to PM you the info on discord? because it says you have messages blocked from non friends. or would it be better the email them to you?Email to me you ship info
Did you ever get my email, Exclusive?Yes ,I get it
Did you ever get my email, Exclusive?Yes ,I get it
Until now still someone ppl not pm me so I need wait a while to ship out
Come one guys, PM him, we want our FEs! ;) :)Did you ever get my email, Exclusive?Yes ,I get it
Until now still someone ppl not pm me so I need wait a while to ship out
soo, when are the FEs gonna ship? ;)This. I'm going nuts over here. I need to BUILD SOMETHING.
I have already ship out 3 dayssoo, when are the FEs gonna ship? ;)This. I'm going nuts over here. I need to BUILD SOMETHING.
I have already ship out 3 dayssoo, when are the FEs gonna ship? ;)This. I'm going nuts over here. I need to BUILD SOMETHING.
Wait the dhl notification plz
And I will fill in PayPal later little busy on my personal things
Check this tracking 2219800984
Whose package not receive
Check this tracking 2219800984
Whose package not receive
where is mine :'(
That’s nice! You sure about putting box switches with all the controversy that’s been going on with them?Show Image(https://i.imgur.com/XvBtrqS.jpg)Show Image(https://i.imgur.com/q3w7R0B.jpg)Show Image(https://i.imgur.com/LRl43rb.jpg)
That’s nice! You sure about putting box switches with all the controversy that’s been going on with them?
does anyone has MAO white build with black nametag/weight/middle case?I have that kit but not built.
gorgeous :eek:Show Image(https://i.imgur.com/L3Yw4DS.jpg)Show Image(https://i.imgur.com/VAbsr9Y.jpg)Show Image(https://i.imgur.com/Ivw3Ewv.jpg)Show Image(https://i.imgur.com/zqscGQV.jpg)
Show Image(https://i.imgur.com/L3Yw4DS.jpg)Show Image(https://i.imgur.com/VAbsr9Y.jpg)Show Image(https://i.imgur.com/Ivw3Ewv.jpg)Show Image(https://i.imgur.com/zqscGQV.jpg)
Crazy. What is the copper looking material - plating over brass?
That's an interesting effect--it looks like a translucent phantom case that bends light around it.
I hope you have a microfiber cloth stashed nearby for the frequent wiping :D
and luckily exclusive was kind enough to include a pair of gloves in the packaging to handle they board with during the building process
planning on wearing mine whenever i use it :pand luckily exclusive was kind enough to include a pair of gloves in the packaging to handle they board with during the building process
Nice touch indeed :thumb:
thanks lightningx1 :thumb:Show Image(https://i.imgur.com/UmGpqua.jpg)Show Image(https://i.imgur.com/RzD0eS3.jpg)Show Image(https://i.imgur.com/G3GVXxz.jpg)Show Image(https://i.imgur.com/Nm1bcTY.jpg)
:thumb:
Show Image(https://i.imgur.com/UmGpqua.jpg)Show Image(https://i.imgur.com/RzD0eS3.jpg)Show Image(https://i.imgur.com/G3GVXxz.jpg)Show Image(https://i.imgur.com/Nm1bcTY.jpg)
:thumb:
Show Image(https://i.imgur.com/UmGpqua.jpg)Show Image(https://i.imgur.com/RzD0eS3.jpg)Show Image(https://i.imgur.com/G3GVXxz.jpg)Show Image(https://i.imgur.com/Nm1bcTY.jpg)
:thumb:
oh, you got the POM Creams? How are they? I think I really need them :D
(Attachment Link):thumb: good job
(Attachment Link)
(Attachment Link)
It's gorgeous... thanks exclusive :)
(Attachment Link)
(Attachment Link)
(Attachment Link)
It's gorgeous... thanks exclusive :)
(Attachment Link)
(Attachment Link)
(Attachment Link)
It's gorgeous... thanks exclusive :)
(Attachment Link)
(Attachment Link)
(Attachment Link)
It's gorgeous... thanks exclusive :)
Red Samurai is quite the set. Excellent build!
QMK HHKB layout in progress: https://github.com/qmk/qmk_firmware/pull/4079
I am missing the screws for the name plate. Does anyone have a spare pair or a ebay link to buy off?
QMK HHKB layout in progress: https://github.com/qmk/qmk_firmware/pull/4079
I am missing the screws for the name plate. Does anyone have a spare pair or a ebay link to buy off?
LOL I had asked way back then for help for someone to test things out for me, but this is even better!!! Hurray!
And the final product:Really nice i love mao so muchShow Image(https://i.imgur.com/WnWz9vR.jpg)
Build infos in the comments:
https://www.reddit.com/r/MechanicalKeyboards/comments/9lup7c/e6v2_x_gmk_laser/ (https://www.reddit.com/r/MechanicalKeyboards/comments/9lup7c/e6v2_x_gmk_laser/)
I have a QMK PCB + Black aluminum plate combo if anyone wants it
I have an extra qmk pcb + plate also if you don't hear from foo.I have a QMK PCB + Black aluminum plate combo if anyone wants it
DO you still have this? If so can you send me a PM? Thanks either way.
I have an extra qmk pcb + plate also if you don't hear from foo.I have a QMK PCB + Black aluminum plate combo if anyone wants it
DO you still have this? If so can you send me a PM? Thanks either way.
Sent from my PH-1 using Tapatalk
another run?
another run?
Don't quote me on it, but I'm pretty sure R2 was the last one he planned on running.
another run?
Don't quote me on it, but I'm pretty sure R2 was the last one he planned on running.
Anyone have experience reflashing one of these PCBs I have one that won't work in the windows environment. Also, does anyone have an extra plate that isn't brass or PC that they want to sell?Installation Drive first, check there qmk.fm (http://qmk.fm)
i know it ridiculous to reply at this time, but i am using an e6-v2 and i love this board so far, but now i want to change with alps switches, can you please share me a file plate and allow me make a custom plate for alps switches, thanks for reading! and happy new yearAnyone have experience reflashing one of these PCBs I have one that won't work in the windows environment. Also, does anyone have an extra plate that isn't brass or PC that they want to sell?Installation Drive first, check there qmk.fm (http://qmk.fm)
I have a QMK PCB + Black aluminum plate combo if anyone wants it