geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: TheKeyCompany on Thu, 10 October 2019, 16:49:25

Title: [GB] M0llY is Here
Post by: TheKeyCompany on Thu, 10 October 2019, 16:49:25
TheKeyCompany Presents: M0llY

(https://cdn.shopify.com/s/files/1/1679/2319/files/m0lly_blacksilver_bc3e44c7-44a3-4dc6-bd3c-b599a52190c7.png?v=1569624904)

We're thrilled to have you meet M0llY. It's a refined take on a timeless design and features an integrated USB-C hub. A fully Geometric replica of the Apple M0110A, this board is a shot of nostalgia turned up to eleven with a sleek modern revision.

https://www.youtube.com/watch?v=fj0qS_Urel0 (https://www.youtube.com/watch?v=fj0qS_Urel0)

https://thekey.company/collections/upcoming-releases/products/m0lly (https://thekey.company/collections/upcoming-releases/products/m0lly)

What's Included

(https://cdn.shopify.com/s/files/1/1679/2319/products/Molly_TableA2_DeMain_0000_720x.jpg?v=1570723292)

PCB

(https://i.imgur.com/H4o8Yei.jpg)

- QMK Firmware
- MX / Alps compatibility
- Based on the TKC1800 design; its bulletproof
- Matte black w gold silk screen
- You must solder switches, indicator LEDS, and in-switch LEDs (if used)
- All SMD components pre-soldered in factory
- 1 year TKC warranty
- USB-C output via hub

CASE/PLATE

(https://cdn.shopify.com/s/files/1/1679/2319/products/Molly_TableA4_DeMain_0000_720x.jpg?v=1570723292)

- Aircraft Grade Aluminum 6061
- 7.5 lbs Unbuilt
- Top Plate Mount
- PVD Brass Plate, 1.5mm thick
- 7 degree typing angle
- PVD Brass Flower Weight
- PVD Brass Front Badge
- Gloss Black PVD Stainless Hardware
- Alps plates available as an add-on product
- Additional Plates, PCBs, and Front Badges are available

PLATES

(https://cdn.discordapp.com/attachments/621163510658891806/632024264161361960/Plate.png)

BADGES

(https://cdn.discordapp.com/attachments/621163510658891806/632024246931030026/Badges.png)

WEIGHTS

(https://cdn.discordapp.com/attachments/621163510658891806/632024274818957322/Flower.png)

HUB

(https://cdn.shopify.com/s/files/1/1679/2319/products/Molly_TableA5_DeMain_0000_720x.jpg?v=1570723292)

- Internal Hub Daughterboard
- USB-C output
- USB-A 3.1 input
- High Speed Data Transfer
- High Amp Charging

COLOR OPTIONS

(https://cdn.shopify.com/s/files/1/1679/2319/files/blog.png?v=1569626396)

Black / Silver
Black case. Bright Silver Plate, Weight, and Badge Finishes.

(https://i.imgur.com/c7LJDz2.png)

Black / Gold
Black case. Bright Gold (Brass) Plate, Weight, and Badge Finishes

(https://i.imgur.com/vjEtGPW.png)

Silver / Black
Apple Silver case. Black plate finish with a Dark Nickel badge and weight finish.

(https://i.imgur.com/WGKSIIu.png)

Pink / Black
Flat Out Fabulous pink case. Black plate Finish with a Dark Nickel badge and weight finish.

(https://i.imgur.com/TWFUIaK.png)

Blue / Silver
Aquatica Blue case. Bright Silver Plate, Weight, and Badge Finish

(https://i.imgur.com/uGCCsK4.png)

White / Black
E-White case. Black plate Finish, with a Dark Nickel Badge and Weight finish.

(https://i.imgur.com/vIccID2.png)

Get your fix for $449 for most colorways.
You asked, we deliver. White M0llY is available for $479. (E-White Coating)

LAYOUT CONFIGURATIONS

The M0llY features a Plethora of Layouts options as well as having a PCB that's both ALPS and MX compatible, with your choice of ALPS or MX plates at time of purchase!

(https://cdn.shopify.com/s/files/1/1679/2319/files/M0LLY_KLE_2424bd9c-c2bf-4ccc-a4b6-fbf7575269d6.png?v=1570565252)

Where Can I Order?!

(https://i.imgur.com/LhJ9WW3.jpg)

https://thekey.company/collections/upcoming-releases/products/m0lly

M0llY orders begin Friday October 11th at 9pm EDT (GMT -4:00). Limit to 200 but this CAN increase based on demand. Expected time of delivery will be in Late March!

Thank you guys for your continued support of TheKeyCompany, and as always, we're proud to deliver a product that you guys can customize, adore, and be proud to put on your desk everyday, we strive to make it more than just an input device and we hope that's reflected in each and every one of our Products.


Show your support by showing M0llY in your GH Sig: (copy paste below into your signature page)
Code: [Select]
[url=https://thekey.company/collections/m0lly][img width=300 height=120]https://i.imgur.com/cX7uAC7.jpg[/img][/url]


Mod Edit: Added [GB] tag to thread title (OP, feel free to remove this note at your discretion)
Title: Re: M0llY is Here
Post by: TheKeyCompany on Thu, 10 October 2019, 16:50:30
[Reserved]
Title: Re: M0llY is Here
Post by: HoffmanMyster on Fri, 11 October 2019, 20:08:59
Approved :thumb:
Title: Re: M0llY is Here
Post by: Rob27shred on Fri, 11 October 2019, 20:18:28
Oh ****... Pulling on my heartstrings & wallet! Unfortunately, I doubt I'll be able to make this party.  :-\
Title: Re: M0llY is Here
Post by: donut_sauce on Fri, 11 October 2019, 20:30:22
This looks great!
Title: Re: M0llY is Here
Post by: switchnollie on Fri, 11 October 2019, 20:45:32
Will you be adding an option to engrave the random badge :cool:
Title: Re: M0llY is Here
Post by: TheKeyCompany on Fri, 11 October 2019, 20:51:18
Quote from: switchnollie on Fri, 11 October 2019, 20:45:32
Will you be adding an option to engrave the random badge :cool:

Unfortunately engraving is a logistical nightmare haha, we figured it'd be best to leave it blank and if someone wanted to get a custom engraving of it they could!
Title: Re: M0llY is Here
Post by: merkz on Fri, 11 October 2019, 21:06:14
I pre ordered this as fast as I could! Ordered the black w/ brass. Reeaaaallly excited
Title: Re: M0llY is Here
Post by: portbaron on Fri, 11 October 2019, 22:27:47
Sigh. Guess I'll get a few.
Title: Re: M0llY is Here
Post by: TheKeyCompany on Fri, 11 October 2019, 22:31:38
Quote from: portbaron on Fri, 11 October 2019, 22:27:47
Sigh. Guess I'll get a few.

Pretty sure I can guess who you are on that comment and your signature :-)
Title: Re: M0llY is Here
Post by: Sifo on Fri, 11 October 2019, 23:15:57
hnnng those color options!
Title: Re: M0llY is Here
Post by: donutcat on Sat, 12 October 2019, 00:17:03
I'm curious about the choice of ports here. A in and C output seems like a bit of a mixup tbh; C makes plenty of sense for either the input or out put but A for a device input seems fairly odd, especially in the context of people probably needing an A to A ≥3.1 cable for full usage. Perhaps there's something I'm not seeing?
Title: Re: M0llY is Here
Post by: BlindAssassin111 on Sat, 12 October 2019, 00:42:27
Quote from: donutcat on Sat, 12 October 2019, 00:17:03
I'm curious about the choice of ports here. A in and C output seems like a bit of a mixup tbh; C makes plenty of sense for either the input or out put but A for a device input seems fairly odd, especially in the context of people probably needing an A to A ≥3.1 cable for full usage. Perhaps there's something I'm not seeing?

It is Type-C for the board to pc, Type-A for plugging in something to charge, a flash drive, a mouse, etc.
Title: Re: M0llY is Here
Post by: donutcat on Sat, 12 October 2019, 01:00:43
Quote from: BlindAssassin111 on Sat, 12 October 2019, 00:42:27
Quote from: donutcat on Sat, 12 October 2019, 00:17:03
I'm curious about the choice of ports here. A in and C output seems like a bit of a mixup tbh; C makes plenty of sense for either the input or out put but A for a device input seems fairly odd, especially in the context of people probably needing an A to A ≥3.1 cable for full usage. Perhaps there's something I'm not seeing?

It is Type-C for the board to pc, Type-A for plugging in something to charge, a flash drive, a mouse, etc.

Ok, so maybe it's just me being stupid. But at the same time the way that
Quote
...features an integrated USB-C hub....

...- USB-C output via hub...
is worded sounds to me like the hub connection is through the C port? Leaving the A for the board? IDK, maybe it's just me with that late-night small brain.
Title: Re: M0llY is Here
Post by: C³—Ears on Sat, 12 October 2019, 01:54:18
Great Design!Good luck with the buy,my friend
Title: Re: M0llY is Here
Post by: TheKeyCompany on Sat, 12 October 2019, 06:46:50
Quote from: C³—Ears on Sat, 12 October 2019, 01:54:18
Great Design!Good luck with the buy,my friend

Thank you my friend! Glad to see you on here!
Title: Re: M0llY is Here
Post by: SantiGo on Sat, 12 October 2019, 07:08:35
nice.... can i Have one with out logo ?
Title: Re: M0llY is Here
Post by: Steezus on Sat, 12 October 2019, 08:58:34
The pink and blue colors look amazing. I really like the design however, not the biggest fan of the logo design on the back. I think that a brass(gold) and aquatic blue option would look amazing. Good luck with the GB!
Title: Re: M0llY is Here
Post by: ImperfectLink on Sat, 12 October 2019, 18:47:24
Ordered as soon as it opened. This GB deserves the attention.
Title: Re: M0llY is Here
Post by: mydens on Sat, 12 October 2019, 18:54:14
Damn, why so expensive? Chinese tariffs hurt.
Title: Re: M0llY is Here
Post by: KingOfMemes on Sat, 12 October 2019, 19:33:55
Quote from: mydens on Sat, 12 October 2019, 18:54:14
Damn, why so expensive? Chinese tariffs hurt.
Brass weight + badge, along with the 1800/numpad tax makes that price right on the money imh
Title: Re: M0llY is Here
Post by: Jhambone9160 on Sat, 12 October 2019, 20:19:18
Ordered. E-white w/black, plus pvd brass plate, pvd brass badge, and extra pcb. Looking forward to the e-white with pvd brass plate and badge look. :)
Title: Re: M0llY is Here
Post by: geewiz on Mon, 14 October 2019, 09:27:02
In for an E-white to go with Extended2048.


Sent from my iPhone using Tapatalk
Title: Re: M0llY is Here
Post by: Techichi on Mon, 14 October 2019, 11:01:16
Damn, I have to pass and I am not happy about it. This board is sick!
Title: Re: M0llY is Here
Post by: celta on Tue, 15 October 2019, 03:13:23
Does e-white stand for egg white? Like the color of the old apple keycaps on AEK's? Or is it a flat pure white?
Title: Re: M0llY is Here
Post by: Lil on Tue, 15 October 2019, 03:31:29
Quote from: celta on Tue, 15 October 2019, 03:13:23
Does e-white stand for egg white? Like the color of the old apple keycaps on AEK's? Or is it a flat pure white?
Electrophoresis

Sent from my G8341 using Tapatalk

Title: Re: M0llY is Here
Post by: spakecdk on Sun, 03 November 2019, 07:55:59
Will the blue be the same as ultramarine on Mekanisk's boards? https://i.imgur.com/dERHrnu.jpg
Title: Re: M0llY is Here
Post by: TheKeyCompany on Sun, 03 November 2019, 08:37:37
Quote from: spakecdk on Sun, 03 November 2019, 07:55:59
Will the blue be the same as ultramarine on Mekanisk's boards? https://i.imgur.com/dERHrnu.jpg

It’s the same Pantone color.
Title: Re: M0llY is Here
Post by: HouseOfKeebs on Sun, 03 November 2019, 13:18:55
How does e-coating compare to anodizing? Is it closer to cerakote?
Title: Re: M0llY is Here
Post by: joerush25 on Mon, 04 November 2019, 16:24:51
Am I the only one that hates that huge flower on the back? Reminds me of those cheesy novelties you get with every MaxKey SA set
Title: Re: M0llY is Here
Post by: BlindAssassin111 on Mon, 04 November 2019, 17:09:51
Quote from: HouseOfKeebs on Sun, 03 November 2019, 13:18:55
How does e-coating compare to anodizing? Is it closer to cerakote?

e-coating is like a hybrid coating. It is similar to anodizing but not the same process. It leads to a really nice finish though, hard to explain if you haven't had the chance to see it in person.
Title: Re: M0llY is Here
Post by: celta on Mon, 04 November 2019, 19:47:13
Any chance I could get a recommendation? I've got some nice old AEK alps keycaps which are nearly in perfect condition and I'm wondering whether it would look better with an E-Coat White or an Apple Silver M0lly. Think I could get some second opinions?
Title: Re: M0llY is Here
Post by: Damage on Tue, 05 November 2019, 20:34:22
Man, I think I burned through my budget getting into the LZ Physix GB, so I don’t think I can get a M0lly. :(

I just wanted to post and say that I think this board will be a classic before you know it if it turns out as presented. Really well done design and detail—and distinctive, too. Best of luck with everything. You deserve huge success.
Title: Re: M0llY is Here
Post by: iaman on Tue, 05 November 2019, 21:32:05
Quote from: celta on Mon, 04 November 2019, 19:47:13
Any chance I could get a recommendation? I've got some nice old AEK alps keycaps which are nearly in perfect condition and I'm wondering whether it would look better with an E-Coat White or an Apple Silver M0lly. Think I could get some second opinions?
My gut says the e-white but both would look great!
Title: Re: M0llY is Here
Post by: megaforce on Thu, 07 November 2019, 23:56:12
cant believe no one posted this

Title: Re: M0llY is Here
Post by: Adelscott on Fri, 08 November 2019, 01:50:25
Quote from: megaforce93 on Thu, 07 November 2019, 23:56:12
cant believe no one posted this

And that's why...
Title: Re: [GB] M0llY is Here
Post by: aeryxz on Mon, 16 November 2020, 21:07:59
N E AVAIL
Title: Re: [GB] M0llY is Here
Post by: Cujo96 on Tue, 17 November 2020, 18:40:44
Quote from: aeryxz on Mon, 16 November 2020, 21:07:59
N E AVAIL
Not if you ordered through a vendor lmaoooooo
Title: Re: [GB] M0llY is Here
Post by: Neodeus on Wed, 18 November 2020, 08:14:46
Received my M0lly. Looks great. Waiting for non-trash stabs to come in the mail before I can build.
Title: Re: [GB] M0llY is Here
Post by: paperassgasket on Thu, 11 March 2021, 00:02:00
So... extras Friday huh?
That's nice but what's up with the PC m0lly?
Title: Re: [GB] M0llY is Here
Post by: MichelKami on Thu, 11 March 2021, 10:16:25
TKC continues to put out heat :thumb:
Title: Re: [GB] M0llY is Here
Post by: BananaMan on Wed, 17 March 2021, 16:11:01
Do I just use regular 1.8 MM LEDs I'd use for the switches for the indicator LEDs? Sorry if that's a dumb question.
Title: Re: [GB] M0llY is Here
Post by: Lyle88 on Tue, 22 June 2021, 05:23:26
Just out of curiosity, has anyone modified the DXF file for the plate to make it fixed layout? Thinking of getting a PC plate cut and just wondering if anyone knows what sort of time investment a change like that would be..

Sent from my SM-G970F using Tapatalk

Title: Re: [GB] M0llY is Here
Post by: andred on Tue, 22 June 2021, 19:37:42
Quote from: BananaMan on Wed, 17 March 2021, 16:11:01
Do I just use regular 1.8 MM LEDs I'd use for the switches for the indicator LEDs? Sorry if that's a dumb question.

I found that 3mm LEDs are perfect.
Title: Re: [GB] M0llY is Here
Post by: geewiz on Wed, 23 June 2021, 06:55:30
Quote from: andred on Tue, 22 June 2021, 19:37:42
I found that 3mm LEDs are perfect.

I'm considering adding these LEDs. What's the best way of estimating the required length up from the PCB?
Title: Re: [GB] M0llY is Here
Post by: andred on Wed, 23 June 2021, 12:46:24
Quote from: geewiz on Wed, 23 June 2021, 06:55:30
I'm considering adding these LEDs. What's the best way of estimating the required length up from the PCB?

Good question. I've not soldered mine yet, and I am not a soldering pro. I might try to rest the PCB into the case top for soldering so I can slide the LEDs into position and let gravity hold them at the correct length.

If you figure out a good technique let me know!