Much much love friends!! <3
Edit: Since it got lost on page 8, here it is again
1. When screwing in the 4 case screws, do them all slowly at the same time. Don't screw in one fully and then the next and then the next etc
2. Same with the plate! This prevents stripping.
3. If your brass plate is slightly bowed or bent, just apply a tiny bit of leverage and bend it back.
4. On the switchplate, the OPEN 2u top corner is where the backspace goes, if you can orient your plate correctly.
5. Do not touch brass with your bare hands or water. It will tarnish unevenly
6. Peel film off both sides of the plastic diffuser! I wrote "Peel" on the side that seems like it doesn't have a film, but it does
![Tongue :P](https://cdn.geekhack.org/Smileys/solosmileys/tongue.gif)
7. You can download the default hex files and both the windows and mac versions of BMC (Bootmapper client) on
www.pearlboards.com/setup8. This is the default flashed layout made by me and flashed using Bootmapper client
https://i.imgur.com/CasX4mA.pngCan't wait to spend three weeks beating my head against a wall trying to get my custom layout flashed
)
If you need help don't hesitate to ask man!